Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
20
30
40
50
60
70
73
74
75
76
77
78
79
80
81
82
83
84
85
90
100
110
120
130
140
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| AES standard for audio connectors - Modified XLR-3 Connector for Digital Audio | |
| AMENDMENT 1 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment | |
| AMENDMENT 1 Discharge lamps (excluding fluorescent lamps) \x96 Safety specifications | |
| Amendment 1 Electric toys \x96 Safety | |
| AMENDMENT 1 Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers | |
| AMENDMENT 1 Electricity metering (AC) \x96 Tariff and load control \x96 Part 21: Particular requirements for time switches | |
| AMENDMENT 1 Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| AMENDMENT 1 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) | |
| AMENDMENT 1 Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) | |
| AMENDMENT 1 Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 21: Tariff and load control equipment | |
| AMENDMENT 1 Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) | |
| AMENDMENT 1 Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) | |
| AMENDMENT 1 Fibre optic active components and devices \x96 Package and interface standards \x96 Part 12: Laser transmitters with a coaxial RF connector | |
| AMENDMENT 1 Fibre optic active components and devices \x96 Package and interface standards \x96 Part 2: SFF 10-pin transceivers | |
| AMENDMENT 1 Fibre optic active components and devices \x96 Performance standards \x96 Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| AMENDMENT 1 Grading capacitors for high-voltage alternating current circuit-breakers \x96 Part 1: General | |
| AMENDMENT 1 LED modules for general lighting \x96 Safety specifications | |
| AMENDMENT 1 Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 2: Actuator sensor interface (AS-i) | |
| AMENDMENT 1 Maritime navigation and radiocommunication equipment and systems \x96 Shipborne voyage data recorder (VDR) \x96 Part 1: Performance requirements, methods of testing and required test results | |
| AMENDMENT 1 Metallic cables and other passive components test methods \x96 Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with... | |
| AMENDMENT 1 Metallic communication cable test methods \x96 Part 4-10: Electromagnetic compatibility (EMC) \x96 Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets \x96 Double coaxial test method | |
| AMENDMENT 1 Metallic communication cable test methods \x96 Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance \x96 Triaxial method | |
| AMENDMENT 1 Safety of machinery \x96 Functional safety of safety-related electrical, electronic and programmable electronic control systems | |
| AMENDMENT 1 Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable... | |
| AMENDMENT 1 Semiconductor optoelectronic devices for fibre optic system applications \x96 Part 1: Specification template for essential ratings and characteristics | |
| AMENDMENT 1 Sound signalling devices for household and similar purposes | |
| AMENDMENT 1 Ultrasonics \x96 Hydrophones \x96 Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz | |
| AMENDMENT 1 Ultrasonics \x96 Hydrophones \x96 Part 2: Calibration for ultrasonic fields up to 40 MHz | |
| AMENDMENT 1 Ultrasonics \x96 Hydrophones \x96 Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz | |
| AMENDMENT 1 Uninterruptible power systems (UPS) \x96 Part 1: General and safety requirements for UPS | |
| AMENDMENT 2 Discharge lamps (excluding fluorescent lamps) \x96 Safety specifications | |
| AMENDMENT 2 Electric toys \x96 Safety | |
| AMENDMENT 2 LED modules for general lighting \x96 Safety specifications | |
| AMENDMENT 2 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | |
| AMENDMENT 2 Sound signalling devices for household and similar purposes | |
| AMENDMENT 2 Ultrasonics \x96 Hydrophones \x96 Part 2: Calibration for ultrasonic fields up to 40 MHz | |
| AMENDMENT 2 Uninterruptible power systems (UPS) \x96 Part 1: Safety requirements | |
| Audio, video and related equipment \x96 Determination of power consumption \x96 Part 4: Video recording equipment | |
| Audio, video and related equipment \x96 Determination of power consumption \x96 Part 5: Set top boxes (STB) | |
| Audio, video and related equipment \x96 Determination of power consumption \x96 Part 6: Audio equipment | |
| Audio, video, and related equipment - Methods of measurement for power consumption Part 7: Computer monitors | |
| Audio, video, and related equipment \x96 Determination of power consumption \x96 Part 1: General | |
| Audio, video, and related equipment \x96 Determination of power consumption \x96 Part 2: Signals and media | |
| Audio, video, and related equipment \x96 Determination of power consumption \x96 Part 3: Television sets | |
| Audio/video, information and communication technology equipment \x96 Environmentally conscious design | |
| Automatic test systems for battery powered emergency escape lighting | |
| Automotive fuels \x97 Blends of Fatty acid methyl ester (FAME) with diesel fuel \x97 Determination of oxidation stability by rapidly accelerated oxidation method at 120 \xb0C | |
| Bateaux de navigation int\xe9rieure - Syst\xe8mes de scell\xe9s douaniers - Exigences techniques principales | |
| BOILING POINT DISTRIBUTION OF HYDROCARBONS BY GAS CHROMATOGRAPHY | |
| Broadcast Digital Video Tape Recorders - Identification Method for Recording and/or Reproduction Error Status | |
| Calibration of optical spectrum analyzers | |
| Calibration of wavelength / optical frequency measurement instruments \x96 Part 3: Optical frequency meters internally referenced to a frequency comb | |
| Calibration of wavelength/optical frequency measurement instruments \x96 Part 1: Optical spectrum analyzers | |
| Calibration of wavelength/optical frequency measurement instruments \x96 Part 2: Michelson interferometer single wavelength meters | |
| Capacitors for high-voltage alternating current circuit-breakers \x96 Part 2: TRV capacitors | |
| Caplights for Use in Mines Susceptible to Firedamp - Part 1: General Requirements - Construction and Testing in Relation to the Risk of Explosion | |
| Caplights for Use in Mines Susceptible to Firedamp - Part 2: Performance and Other Safety-Related Matters | |
| Characteristics of DAB (Digital Audio Broadcast) Receivers | |
| Chemical Products for Industrial Use - Sampling - Vocabulary First Edition | |
| Concentrator photovoltaic (CPV) modules and assemblies \x96 Design qualification and type approval | |
| Core model of the electronics domain | |
| Cores Made of Soft Magnetic Materials - Measuring Methods - Part 1: Generic Specification | |
| Cores Made of Soft Magnetic Materials - Measuring Methods - Part 3: Magnetic Properties at High Excitation Level | |
| CORES MADE OF SOFT MAGNETIC MATERIALS \x96 MEASURING METHODS \x96 Part 2: Magnetic properties at low excitation level | |
| CORES MADE OF SOFT MAGNETIC MATERIALS \x96 MEASURING METHODS \x96 Part 3: Magnetic properties at high excitation level | |
| Cores made of soft magnetic materials Measuring methods Part 2: Magnetic properties at low excitation level | |
| CORRIGENDUM 1 Electricity metering equipment \x96 Dependability Part 31-1: Accelerated reliability testing \x96 Elevated temperature and humidity | |
| Corrigendum 1 High frequency inductive components \x96 Electrical characteristics and measuring methods \x96 Part 1: Nanohenry range chip inductor | |
| DATA LINK GROUND SYSTEM STANDARD AND INTERFACE SPECIFICATION (DGSS/IS) | |
| DATALINK GROUND SYSTEM AND INTERFACE SPECIFICATION | |
| DATALINK GROUND SYSTEM STANDARD AND INTERFACE SPECIFICATION (DGSS/IS) | |
| DATALINK GROUND SYSTEMS STANDARD AND INTERFACE SPECIFICATION (DGSS/IS) | |
| Digital Audio Broadcast System - Specification of the Receiver Data Interface (RDI) | |
| Discharge Lamps (Excluding Fluorescent Lamps) - Safety Specifications | |
| Drinking Water System Components - Health Effects | |
| Drinking water system components Health effects | |
| Drinking Water System Components- Health Effects | |
| ELECTRIC AND MAGNETIC FIELD LEVELS GENERATED BY AC POWER SYSTEMS \x96 MEASUREMENT PROCEDURES WITH REGARD TO PUBLIC EXPOSURE | |
| Electric toys \x96 Safety | |
| Electrical Accessories - Circuit-Breakers and Similar Equipment for Household Use - Auxiliary Contact Units | |
| Electrical Accessories - Residual Current Monitors for Household and Similar Uses (RCMs) | |
| ELECTRICAL ACCESSORIES \x96 RESIDUAL CURRENT MONITORS (RCMs) \x96 Part 1: RCMs for household and similar uses | |
| Electrical Apparatus for Explosive Gas Atmospheres - Electrical Resistance Trace Heating - Part 1: General and Testing Requirements | |
| Electrical Apparatus for Explosive Gas Atmospheres - Electrical Resistance Trace Heating - Part 2: Application Guide for Design, Installation and Maintenance | |
| Electrical energy meters \x96 Test equipment, techniques and procedures \x96 Part 1: Stationary meter test units (MTUs) | |
| Electrical energy meters \x96 Test equipment, techniques and procedures \x96 Part 3: Automatic meter testing system (AMTS) | |
| Electrical insulating materials and systems \x96 General method of evaluation of electrical endurance under repetitive voltage impulses | |
| Electrical Insulation Systems (EIS) - Thermal Classification | |
| Electrical insulation systems Electrical stresses produced by repetitive impulses Part 1: General method of evaluation of electrical endurance | |
| Electricity metering (A.C.) \x96 tariff and Load control \x96 Part 11: Particular requirements for electronic ripple control receivers | |
| Electricity metering (a.c.) Tariff and load control Part 11: Particular requirements for electronic ripple control receivers | |
| Electricity metering (a.c.) Tariff and load control Part 21: Particular requirements for time switches | |
| ELECTRICITY METERING (AC) \x96 TARIFF AND LOAD CONTROL \x96 Part 21: Particular requirements for time switches | |
| Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 21: Direct Local Data Exchange | |
| Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 42: Physical Layer Services and Procedures for Connection-Oriented Asynchronous Data Exchange | |
| Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 46: Data Link Layer Using HDLC Protocol | |
| Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 61: Object Identification System (OBIS) | |
| Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control - Part 62: Interface Classes | |
| Electricity metering - Data Exchange for Meter Reading, Tariff and Load Control Part 31: Use of Local Area Networks on Twisted Pair with Carrier Signalling | |
| Electricity metering \x96 Data exchange for meter reading, tariff and load control \x96 Part 47: COSEM transport layers for IPv4 networks | |
| Electricity metering \x96 Data exchange for meter reading, tariff and load control \x96 Part 53: COSEM application layer | |
| Electricity metering \x96 Payment systems \x96 Part 31: Particular requirements \x96 Static payment meters for active energy (classes 0,5, 1 and 2) (Commented Version) | |
| Electricity metering \x96 Payment systems \x96 Part 31: Particular requirements \x96 Static payment meters for active energy (classes 1 and 2) CORRIGENDUM 1 | |
| Electricity metering \x96 Payment systems \x96 Part 41: Standard transfer specification (STS) \x96 Application layer protocol for one-way token carrier systems | |
| Electricity metering \x96 Payment systems \x96 Part 42: Transaction Reference Numbers (TRN) | |
| Electricity metering \x96 Payment systems \x96 Part 51: Standard transfer specification (STS) \x96 Physical layer protocol for one-way numeric and magnetic card token carriers | |
| Electricity metering \x96 Payment systems \x96 Part 52: Standard transfer specification (STS) \x96 Physical layer protocol for a twoway virtual token carrier for direct local connection | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 7-3: Wired and wireless M-Bus communication profiles for local and neighbourhood networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 1-0: Smart metering standardisation framework | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 3-1: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 5-3: DLMS/COSEM application layer | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 6-1: Object Identification System (OBIS) | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 6-2: COSEM interface classes | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 7-5: Local data transmission profiles for Local Networks (LN) | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 7-6: The 3-layer, connection-oriented HDLC based communication profile | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 8-3: Communication profile for PLC S-FSK neighbourhood networks | |
| Electricity metering data exchange \x96 the DLMS/COSEM suite \x96 Part 8-4: Communication profiles for narrow-band OFDM PLC PRIME neighbourhood networks | |
| ELECTRICITY METERING DATA EXCHANGE \x96 THE DLMS/COSEM SUITE \x96 Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks CORRIGENDUM 1 | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 8-8: Communication profile for ISO/IEC 14908 series networks | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 9-7: Communication profile for TCP-UDP/IP networks | |
| Electricity metering data exchange \x96 The DLMS\xae/COSEM suite \x96 Part 6-1: Object Identification System (OBIS) | |
| Electricity metering data exchange \x96 The DLMS\xae/COSEM suite \x96 Part 8-12: Communication profile for Low-Power Wide Area Networks (LPWANs) | |
| Electricity metering data exchange \x96The DLMS/COSEM suite \x96 Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks | |
| Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment | |
| ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - Part 21: Static meters for active energy (classes 1 and 2) | |
| Electricity Metering Equipment (a.c.) - Particular Requirements - Part 31: Pulse Output Devices for Electromechanical and Electronic Meters (Two Wires Only) | |
| Electricity Metering Equipment (a.c.) - Particular Requirements - Part 61: Power Consumption and Voltage Requirements | |
| Electricity metering equipment (A.C.) - Particular requirements \x96 Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) | |
| ELECTRICITY METERING EQUIPMENT (A.C.) \x96 GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS \x96 Part 21: Tariff and load control equipment CORRIGENDUM 1 | |
| ELECTRICITY METERING EQUIPMENT (A.C.) \x96 PARTICULAR REQUIREMENTS \x96 Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 23: Static meters for reactive energy (classes 2 and 3) | |
| Electricity metering equipment (A.C.) \x96 Particular requirements \x96 Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) | |
| Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 21: Tariff and load control equipment | |
| Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) | |
| Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) | |
| Electricity metering equipment (a.c.) Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3) | |
| Electricity metering equipment (AC) \x96 Acceptance inspection \x96 Part 11: General acceptance inspection methods | |
| Electricity metering equipment (AC) \x96 Acceptance inspection \x96 Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (AC) \x96 Acceptance inspection \x96 Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) | |
| ELECTRICITY METERING EQUIPMENT (AC) \x96 GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS \x96 Part 31: Product safety requirements and tests | |
| Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment | |
| Electricity metering equipment (AC) Particular requirements Part 52: Symbols | |
| Electricity metering equipment \x96 Dependability \x96 Part 31-1: Accelerated reliability testing \x96 Elevated temperature and humidity | |
| Electricity metering equipment \x96 Dependability \x96 Part 32-1: Durability \x96 Testing of the stability of metrological characteristics by applying elevated temperature | |
| Electricity metering equipment \x96 Dependability \x96 Part 41: Reliability prediction | |
| Electricity metering equipment \x96 General requirements, tests and test conditions \x96 Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters | |
| Electricity metering equipment \x96 Particular requirements \x96 Part 41: Static meters for DC energy (classes 0,5 and 1) | |
| Electricity metering Payment systems Part 31: Particular requirements Static payment meters for active energy (classes 1 and 2) | |
| Electronic Design Automation Libraries - Part 1: Input/Output Buffer Information Specifications (IBIS Version 3.2) | |
| Electronic equipment for use in power installations | |
| Electronics assembly technology \x96 Part 3: Selection guidance of environmental and endurance test methods for solder joints | |
| Electronics assembly technology \x96 Part 4: Endurance test methods for solder joint of area array type package surface mount devices | |
| Environmental and endurance testing \x96 Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN | |
| Environmental considerations specific to insulated electrical power and control cables | |
| Evaluation and routine testing in medical imaging departments - Part 2: Constancy tests - Equipment for general direct radiography | |
| Evaluation and routine testing in medical imaging departments - Part 2: Constancy tests - Equipment for indirect radioscopy and indirect radiography | |
| Evaluation and routine testing in medical imaging departments - Part 2: Constancy tests - Equipment for intra-oral dental radiography excluding dental panoramic equipment | |
| Evaluation and routine testing in medical imaging departments - Part 2: Constancy tests - Film processors | |
| Evaluation and routine testing in medical imaging departments - Part 2: Constancy tests - X-ray equipment for mammography | |
| Evaluation and routine testing in medical imaging departments Part 2: Constancy tests - Equipment for general direct radiography | |
| Evaluation and routine testing in medical imaging departments Part 2: Constancy tests - Equipment for indirect radioscopy and indirect radiography | |
| Evaluation and routine testing in medical imaging departments Part 2: Constancy tests - X-ray equipment for mammography | |
| Fiber optic active components and devices \x96 Package and interface standards \x96 Part 16: Transmitter and receiver components for use with the LC connector interface | |
| Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 10: SFF MU duplex 20-pin transceivers | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 15: Discrete vertical cavity surface emitting laser packages | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 17: Transmitter and receiver components with dual coaxial RF connectors | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 19: Photonic chip scale package | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 21: Design guide of electrical interface of PIC packages using silicon finepitch ball grid array (S-FBGA) and... | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 21: Design guidelines of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and... | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 22: 25 Gbit/s directly modulated laser packages with temperature control unit | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 2: SFF MT-RJ 10-pin transceivers CORRIGENDUM 1 | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 2: SFF MT-RJ 10-pin transceivers | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 3: SFF MT-RJ 20-pin transceivers | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 6: ATM-PON transceivers | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 8: SFF LC 20-pin transceivers | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 9: SFF MU duplex 10-pin transceivers CORRIGENDUM 1 | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 9: SFF MU duplex 10-pin transceivers | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 12: Distributed feedback laser diode device for analogue radio over fibre systems | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 1: General and guidance CORRIGENDUM 1 | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 1: General and guidance | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 2: 850 nm discrete vertical cavity surface emitting laser devices | |
| FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES \x96 PERFORMANCE STANDARDS \x96 Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application CORRIGENDUM 1 | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 5: ATM-PON transceivers with LD driver and CDR ICs | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 8: Seeded reflective semiconductor optical amplifier devices | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 9: Seeded reflective semiconductor optical amplifier transceivers | |
| Fibre optic active components and devices \x96 Test and measurement procedures \x96 Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces | |
| Fibre optic active components and devices \x96 Test and measurement procedures \x96 Part 4: Relative intensity noise using a time-domain optical detection system | |
| Fibre optic active components and devices \x96 Test and measurement procedures \x96 Part 6: Universal mezzanine boards for test and measurement of photonic devices | |
| Fibre optic active components and devices Package and interface standards Part 11: 14-pin modulator-integrated laser diode transmitters | |
| Fibre optic active components and devices Package and interface standards Part 12: Laser transmitters with a coaxial RF connector | |
| Fibre optic active components and devices Package and interface standards Part 4: PN 1 9 plastic optical transceivers | |
| Fibre optic active components and devices Package and interface standards Part 5: SC 1x9 fibre optic modules | |
| Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers | |
| Fibre optic active components and devices Package and interface standards Part 7: SFF LC 10-pin transceivers | |
| Fibre optic active components and devices Performance standards Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters | |
| Fibre optic active components and devices Performance standards Part 5: ATM-PON transceivers with LD driver and CDR ICs | |
| Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers | |
| Fibre optic active components and devices Test and measurement procedures Part 1: General and guidance | |
| Fibre optic active components and devices Test and measurement procedures Part 2: ATM-PON transceivers | |
| Fibre Optic Active Componets and Devices - Package and Interface Standards - Part 1: General and Guidance | |
| Fibre Optic Circulators - Generic Specification | |
| Fibre Optic Enclosures - Part 1: Generic Specification | |
| Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic circulators \x96 Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic WDM devices \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Reliability \x96 Part 9-4: High power qualification of passive optical components for environmental category C | |
| Fibre Optic Wavelength Switches - Generic Specification | |
| General methods of measurement for digital television receivers | |
| Grading capacitors for high-voltage alternating current circuit-breakers \x96 Part 1: General | |
| Guide for the application, specification, and testing of phase-shifting transformers | |
| Guide for the maintenance of infusion pumps and controllers | |
| Guidelines for interpretation of safety indexes in ultrasonic medical diagnostician | |
| Guidelines to acceptance tests and to safety and performance periodical checks of baby incubators, transport incubators and infant radiant warmers | |
| Guidelines to acceptance tests and to safety and/or performance periodical checks of electromedical systems | |
| Guidelines to acceptance tests and to safety and/or performance periodical checks of electrotechnical systems | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape \x96 Format D-7 \x96 Part 1: VTR specifications | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 2: Compression format | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 3: Data stream format | |
| Helical-Scan Compressed Digitsl Video Cassette Recording System Using 6,35 mm Magnetic Tape - Format D-7 | |
| Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression Type D-16 format | |
| High Frequency Inductive Componenets - Electrical Characteristics and Measuring Methods - Part 1: Nanohenry Range Chip Inductor | |
| High Frequency Inductive Components - Non-Electrical Characteristics and Measuring Methods - Part 1: Fixed, Surface Mounted Inductors for use in Electric and Telecommunication Equipment | |
| High frequency inductive components \x96 Electrical characteristics and measuring methods \x96 Part 1: Nanohenry range chip inductor | |
| High frequency inductive components \x96 Electrical characteristics and measuring methods \x96 Part 2: Rated current of inductors for DC to DC converters | |
| High frequency inductive components \x96 Electrical characteristics and measuring methods \x96 Part 2: Rated current of inductors for DC-to-DC converters | |
| High frequency inductive components \x96 Non-electrical characteristics and measuring methods \x96 Part 2: Test methods for non-electrical characteristics | |
| High frequency inductive components Non-electrical characteristics and measuring methods Part 2: Test methods for non-electrical characteristics | |
| Hose Assemblies | |
| Hydraulic machines \x96 Acceptance tests of small hydroelectric installations | |
| Hydraulic machines, radial and axial \x96 Performance conversion method from model to prototype | |
| Indicator light units for household and similar fixed- electrical installations Part 1: General requirements | |
| Industrial electroheating installations \x96 Test methods for induction channel and induction crucible furnaces | |
| Ingr\xe9dients de m\xe9lange du caoutchouc - Noir de carbone - D\xe9termination des mati\xe8res extractibles par les solvants | |
| Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles | |
| Insulating liquids \x96 Determination of acidity \x96 Part 3: Test methods for non-mineral insulating oils | |
| Insulating liquids \x96 Determination of acidity Part 2: Colourimetric titration | |
| Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration | |
| Insulating Materials - Industrial, Rigid, Moulded, Laminated Tubes and Rods of Rectangular and Hexagonal Cross-Section Based on Thermosetting Resins for Electrical Purposes - Part 1: Definitions, Designations and General Requirements... | |
| Insulating materials Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials Tubes and rods... | |
| Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Part 2: Methods of test | |
| Integrated circuits \x96 Measurement of electromagnetic immunity 150 kHz to 1 GHz \x96 Part 4: Direct RF power injection method | |
| Integrated circuits \x96 Measurement of electromagnetic immunity \x96 Part 2: Measurement of radiated immunity \x96 TEM cell and wideband TEM cell method | |
| Integrated circuits \x96 Measurement of electromagnetic immunity \x96 Part 8: Measurement of radiated immunity \x96 IC stripline method | |
| Integrated circuits \x96 Measurement of electromagnetic immunity, 150 kHz to 1 GHz \x96 Part 3: Bulk current injection (BCI) method | |
| Integrated circuits \x96 Measurement of electromagnetic Integrated circuits \x96 Measurement of electromagnetic immunity, 150 kHz to 1 GHz \x96 Part 1: General conditions and definitions | |
| Integrated circuits Measurement of electromagnetic immunity, 150 kHz to 1 GHz Part 5: Workbench Faraday cage method | |
| IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows | |
| LED modules for general lighting \x96 Safety specifications | |
| Low-Voltage Switchgear and Controlgear - Controller-Device Interface (CDIs) - Part 3: DeviceNet | |
| Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 1: General Rules | |
| Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 2: Actuator Sensor Interface (AS-i) | |
| Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 5: Smart Distributed System (SDS) | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 3: DeviceNet | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 6: Seriplex (Serial Multiplexed Control Bus) | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 7: CompoNet | |
| Mapping between the clauses of the third edition of IEC 60601-1 and the 1988 edition as amended | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Shipborne Voyage Data Recorder (VDR) - Performance Requirements - Methods of Testing and Required Test Results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Shipborne voyage data recorder (VDR) \x96 Part 1: Performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Shipborne voyage data recorder (VDR) \x96 Part 1: Voyage data recorder (VDR) \x96 Performance requirements, methods of testing and required test results... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Shipborne voyage data recorder (VDR) \x96 Part 2: Simplified voyage data recorder (S-VDR) \x96 Performance requirements, methods of testing and required test... | |
| Maritime navigation and radiocommunication equipment and systems Track control systems Operational and performance requirements, methods of testing and required test results | |
| Medical Electrical Equipment - Requirements for the Safety of Radiotherapy Treatment Planning Systems | |
| Medical electrical equipment Part 1: General requirements for basic safety and essential performance - Collateral standard: Usability | |
| Medical Radiology - Guidelines to terminology | |
| Metallic cables and other passive components \x96 Test methods \x96 Part 4-17: Electromagnetic compatibility (EMC) \x96 Reduction Factor | |
| Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - Line injection method IEC | |
| Metallic cables and other passive components test methods \x96 Part 4-15: Electromagnetic compatibility (EMC) \x96 Test method for measuring transfer impedance and screening attenuation \x96 or coupling attenuation with triaxial... | |
| METALLIC CABLES AND OTHER PASSIVE COMPONENTS TEST METHODS \x96 Part 4-16: Electromagnetic compatibility (EMC) \x96 Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies... | |
| Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation... | |
| Metallic communication cable test methods \x96 Part 4-10: Electromagnetic compatibility (EMC) \x96 Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial method... | |
| Metallic communication cable test methods \x96 Part 4-11: Electromagnetic compatibility (EMC) \x96 Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables \x96 Absorbing clamp method | |
| Metallic communication cable test methods \x96 Part 4-12: Electromagnetic compatibility (EMC) \x96 Coupling attenuation or screening attenuation of connecting hardware \x96 Absorbing clamp method | |
| Metallic communication cable test methods \x96 Part 4-13: Electromagnetic compatibility (EMC) \x96 Coupling attenuation of links and channels (laboratory conditions) \x96 Absorbing clamp method | |
| Metallic communication cable test methods \x96 Part 4-14: Electromagnetic compatibility (EMC) \x96 Coupling attenuation of cable assemblies (field conditions) absorbing clamp method | |
| Metallic communication cable test methods \x96 Part 4-15: Electromagnetic compatibility (EMC) \x96 Test method for measuring transfer impedance and screening attenuation \x96 or coupling attenuation with triaxial cell | |
| Metallic communication cable test methods \x96 Part 4-4: Electromagnetic compatibility (EMC) \x96 Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz... | |
| Metallic communication cable test methods \x96 Part 4-6: Electromagnetic compatibility (EMC) \x96 Surface transfer impedance \x96 Line injection method | |
| Metallic communication cables test methods \x96 Part 4-3: Electromagnetic compatibility (EMC) \x96 Surface transfer impedance \x96 Triaxial method | |
| Metallic communication cables test methods \x96 Part 4-5: Electromagnetic compatibility (EMC) \x96 Coupling or screening attenuation \x96 Absorbing clamp method | |
| Metallic communication cables test methods \x96 Part 4-7: Electromagnetic compatibility (EMC) \x96 Test method for measuring the transfer impedance and the screening \x96 or the coupling attenuation \x96 Tube in... | |
| Metallic communication cables test methods Part 1-1: Electrical Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) | |
| Metallic communication cables test methods Part 4-2: Electromagnetic compatibility (EMC) Screening and coupling attenuation Injection clamp method | |
| Methods of Measurement for Consumer-Use Digital VTRs - Electronic and Mechanical Performances | |
| Methods of Measurement for Minidisc Recorders/Players | |
| Methods of Measurement for the Power Consumption of Audio, Video and Related Equipment | |
| Micrographie - Microformes documentaires g\xe9latino-argentiq ues de premi\xe8re g\xe9n\xe9ration - Sp\xe9cifications des densit\xe9s et m\xe9thode de mesurage | |
| Mobile and portable DVB-T/H radio access \x96 Part 1: Interface specification | |
| Mobile and portable DVB-T/H radio access Part 1: Interface specification | |
| Mobile and portable DVB-T/H radio access Part 2: Interface conformance testing | |
| MODULAR POWER SUPPY STANDARD - THIS STANDARD PROVIDES REQUIREMENTS FOR BUILDING A POWER SUPPLY MODULE THAT CAN BE USED TO POWER A VPX CHASSIS. *** AVAILABLE AS ELECTRONIC DELIVERY IN... | |
| Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Part 1: Generic specification | |
| National Differences For UL 62109-1 Safety of Power Converters for Use in Photovoltaic Power Systems \x96 Part 1: General Requirements | |
| Nuclear Instrumentation - Calibration and Usage of Alpha/Beta Gas Proportional Counters | |
| Nuclear Instrumentation - Photodiodes for Scintillation Detectors - Test Procedures | |
| Nuclear power plants \x96 Instrumentation and control important to safety \x96 Requirements for electromagnetic compatibility testing | |
| Nuclear power plants \x96 Instrumentation and control systems important to safety \x96 Software aspects for computer-based systems performing category B or C functions | |
| Nuclear power plants Instrumentation and control important for safety Software aspects for computer-based systems performing category B or C functions | |
| Nuclear Reactor Instrumentation - Pressurized Light Water Reactors (PWR) - Monitoring Adequate Cooling within the Core During Cold Shutdown | |
| Nuclear Reactor Instrumentation - Pressurized Water Reactor (PWR) of VVER Design - Monitoring Adequate Cooling within the Core During Shutdown | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 1: General requirements and measuring methods | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 2: Measurement of passive intermodulation in coaxial cable assemblies | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 3: Measurement of passive intermodulation in coaxial connectors | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 4: Measurement of passive intermodulation in coaxial cables | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 5: Measurement of passive intermodulation in filters | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 6: Measurement of passive intermodulation in antennas | |
| Passive rf and microwave devices, intermodulation level measurement \x96 Part 7: Field measurements of passive intermodulation | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation | |
| Performance characteristics and calibration methods for digital data acquisition systems and relevant software | |
| Performance Rating of Self-contained Humidifiers for Residential Applications | |
| Photovoltaic (PV) stand-alone systems Design verification | |
| Plaques, t\xf4les et bandes en nickel et alliages de nickel | |
| Power Cables with Extruded Insulation and Their Accessories for Rated Voltages Above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test Methods and... | |
| Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) \x96 Test methods and... | |
| Power consumption of information technology equipment Measurement methods | |
| Power transformers, power supply units, reactors and similar products EMC requirements | |
| Preparation of Instructions - Structuring, Content and Presentation | |
| Preparation of Parts Lists | |
| PREVENTION OF FIRE/DUST EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES | |
| Product package labels for electronic components using bar code and two-dimensional symbologies | |
| Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs | |
| Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 1: Modulation characteristics and baseband coding | |
| Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 5: Marking of RDS receiver devices | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 10: UECP \x96 Universal Encoder Communication Protocol | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 2: Message format: Coding and definitions of RDS features | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 3: Usage and registration of Open Data Applications (ODAs) IEC... | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 4: Registered code tables | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 6: Compilation of technical specifications for Open Data Applications in... | |
| Radio data system (RDS) \x96VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 9: RBDS \x96 RDS variant used in North America | |
| Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems | |
| Railway applications Fixed installations Part 1: Protective provisions relating to electrical safety and earthing | |
| Railway applications Fixed installations Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems | |
| Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 1: Introductory Guide and Definitions | |
| Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 2: Quantitative Assessment of Reliability Based on Accelerated Ageing Tests - Temperature and Humidity; Steady State | |
| Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating Failure Modes and Failure Mechanisms for Passive Components | |
| Reliability of Fibre Optic Interconnecting Devices and Passive Optical Components - Part 4: Product Screening | |
| Reliability of fibre optic interconnecting devices and passive optical components \x96 Part 9-2: Reliability qualification for single fibre optic connector sets \x96 Single mode | |
| Reliability of fibre optic interconnecting devices and passive optical components Part 7: Life stress modeling | |
| Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements | |
| Resistance welding equipment \x96 Part 1: Safety requirements for design, manufacture and installation | |
| Resistance welding equipment \x96 Part 2: Electromagnetic compatibility (EMC) requirements | |
| RF Connectors, Connector Cable Assemblies and Cables - Intermodulation Level Measurement | |
| Safety for Anhydrous Ammonia Application Equipment | |
| Safety of Equipment Electrically Connected to a Telecommunication Network | |
| Safety of machinery - Application of protective equipment to detect the presence of persons | |
| Safety of machinery \x96 Functional safety of safety-related electrical, electronic and programmable electronic control systems CORRIGENDUM 1 | |
| Safety of machinery \x96 Functional safety of safety-related electrical, electronic and programmable electronic control systems CORRIGENDUM 2 | |
| Safety of machinery \x96 Functional safety of safety-related electrical, electronic and programmable electronic control systems | |
| Safety of power converters for use in photovoltaic power systems \x96 Part 2: Particular requirements for inverters | |
| SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS \x96 Part 3: Particular requirements for electronic devices in combination with photovoltaic elements | |
| SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES \x96 SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS \x96... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications | |
| Semiconductor devices - Micro-electromechani cal devices - Part 15: Test method of bonding strength between PDMS and glass | |
| Semiconductor devices - Micro-electromechani cal devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods | |
| Semiconductor devices - Micro-electromechani cal devices - Part 17: Bulge test method for measuring mechanical properties of thin films | |
| Semiconductor devices - Micro-electromechani cal devices - Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices | |
| Semiconductor devices - Micro-electromechani cal devices - Part 29: Electromechanical relaxation test method for freestanding conductive thin films under room temperature | |
| Semiconductor devices - Micro-electromechani cal devices - Part 53: MEMS electrothermal transfer device | |
| Semiconductor devices - Micro-electromechani cal devices Part 27: Bond strength test for glass frit bonded structures using micro-chevrontests (MCT) | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 10: Micro-pillar compression test for MEMS materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechani cal systems | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 13: Bend - and shear - type test methods of measuring adhesive strength for MEMS structures | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 14: Forming limit measuring method of metallic film materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 18: Bend testing methods of thin film materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 19: Electronic compasses | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 20: Gyroscopes | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 21: Test method for Poisson's ratio of thin film MEMS materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 25: Silicon based MEMS fabrication technology \x96 Measurement method of pull-press and shearing strength of micro bonding area | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 26: Description and measurement methods for micro trench and needle structures | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 2: Tensile testing method of thin film materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 32: Test method for the nonlinear vibration of MEMS resonators | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 33: MEMS piezoresistive pressure-sensitive device | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 34: Test methods for MEMS piezoresistive pressure-sensitive device on wafer | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 35: Test method of electrical characteristics under bending deformation for flexible electromechanical devices | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 36: Environmental and dielectric withstand test methods for MEMS piezoelectric thin films | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 37: Environmental test methods of MEMS piezoelectric thin films for sensor application | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 38: Test method for adhesion strength of metal powder paste in MEMS interconnection | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 3: Thin film standard test piece for tensile testing | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 40: Test methods of micro-electromechani cal inertial shock switch threshold | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 41: RF MEMS circulators and isolators | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 42: Measurement methods of electro-mechanical conversion characteristics of piezoelectric MEMS cantilever | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 43: Test method of electrical characteristics after cyclic bending deformation for flexible micro-electromechani cal devices | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 44: Test methods for dynamic performances of MEMS resonant electric-field-sensi tive devices | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 45: Silicon based MEMS fabrication technology \x96 Measurement method of impact resistance of nanostructures | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 46: Silicon based MEMS fabrication technology \x96 Measurement method of tensile strength of nanoscale thickness membrane | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 47: Silicon based MEMS fabrication technology \x96 Measurement method of bending strength of microstructures | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 48: Test method for determining solution concentration by optical absorption using MEMS fluidic device | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 4: Generic specification for MEMS | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 50: MEMS capacitive microphones | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 5: RF MEMS switches | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 6: Axial fatigue testing methods of thin film materials | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 7: MEMS BAW filter and duplexer for radio frequency control and selection | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 8: Strip bending test method for tensile property measurement of thin films | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 9: Wafer to wafer bonding strength measurement for MEMS | |
| Semiconductor devices Micro-electromechani cal devices Part 1: Terms and definitions | |
| SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 1: SPECIFICATION TEMPLATE FOR ESSENTIAL RATINGS AND CHARACTERISTICS | |
| Semiconductor Optoelectronic Devices for Fibre Optic System Applications - Part 2: Measuring Methods | |
| Sound Signalling Devices for Household and Similar Purposes | |
| Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz CORRIGENDUM 1 | |
| Specification of the Radio Data System (RDS) for VHF/FM Sound Broadcasting in the Frequency Range from 87,5 to 108,0 MHz | |
| Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities | |
| Structuring of Technical Information and Documentation | |
| Super Video Compact Disc - Disc-Interchange System-Specification | |
| Surface mounting technology \x96 Environmental and endurance test methods for surface mount solder joint \x96 Part 1-1: Pull strength test | |
| Surface mounting technology \x96 Environmental and endurance test methods for surface mount solder joint \x96 Part 1-2: Shear strength test | |
| Surface mounting technology \x96 Environmental and endurance test methods for surface mount solder joint \x96 Part 1-3: Cyclic drop test | |
| Surface mounting technology \x96 Environmental and endurance test methods for surface mount solder joint \x96 Part 1-4: Cyclic bending test | |
| Surface mounting technology \x96 Environmental and endurance test methods for surface mount solder joints \x96 Part 1-5: Mechanical shear fatigue test | |
| Test procedure of islanding prevention measures for utility-interconnect ed photovoltaic inverters | |
| Thermal-resistant aluminium alloy wire for overhead line conductor | |
| Three Phase High-Voltage Power Supply Front-End in a 3U Plug-In Module Standard | |
| Tubes sans soudure en nickel et alliages de nickel | |
| UL Standard for Safety Balance-of-System Components for Photovoltaic Systems \x96 Design Qualification Natural Environments | |
| UL Standard for Safety Concentrator Photovoltaic (CPV) Modules and Assemblies \x96 Design Qualification and Type Approval | |
| UL STANDARD FOR SAFETY Low-Voltage Switchgear and Controlgear \x96 Controllers for Drivers of Stationary Fire Pumps | |
| UL Standard for Safety of power converters for use in photovoltaic power systems \x96 Part 1: General requirements | |
| UL STANDARD FOR SAFETY Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes \x96 Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from Them, for Use... | |
| Ultrasonics - Hydrophones - Characteristics and Calibration in the Frequency Range from MHz to 40 MHz | |
| Ultrasonics \x96 Hydrophones \x96 Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz | |
| Ultrasonics \x96 Hydrophones \x96 Part 1: Measurement and characterization of medical ultrasonic fields | |
| Ultrasonics \x96 Hydrophones \x96 Part 2: Calibration for ultrasonic fields up to 40 MHz | |
| Ultrasonics \x96 Hydrophones \x96 Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz | |
| Ultrasonics \x96 Hydrophones \x96 Part 3: Properties of hydrophones for ultrasonic fields | |
| Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements | |
| UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS | |
| Uninterruptible power systems (UPS) \x96 Part 1: General and safety requirements for UPS | |
| Uninterruptible power systems (UPS) \x96 Part 1: Safety requirements (Extended Version) | |
| Uninterruptible power systems (UPS) \x96 Part 3: Method of specifying the performance and test requirements | |
| Uninterruptible power systems (UPS) \x96 Part 4: Environmental aspects \x96 Requirements and reporting | |
| Uninterruptible power systems (UPS) \x96 Part 5-3: DC output UPS \x96 Performance and test requirements | |
| Uninterruptible power systems (UPS) Part 1-1: General and safety requirements for UPS used in operator access areas | |
| Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations | |
| Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS CORRIGENDUM 1 | |
| V\xe9rins pour t\xeates de soudage par r\xe9sistance mont\xe9es sur robot - Partie 1: Prescriptions g\xe9n\xe9rales | |
| Verilog register transfer level synthesis | |
| VHDL Register Transfer Level (RTL) synthesis |
| << Prev | Next >> |