Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
60
67
68
69
70
71
72
73
74
75
76
77
78
79
80
90
100
110
120
130
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abrasive Products - Segmented Saws for Machining of Stone and Masonry Cutting - Dimensions of Steel Blades | |
| Absolute Calibration of Hydrophones Using the Planar Scanning Technique in the Frequency Range 0,5 MHz to 15 MHz | |
| Acceptance Tests for Steam Turbine Speed Control Systems | |
| Acoustics - Measurement of Airborne Noise Emitted by Steam Turbines and Driven Machinery | |
| Airborne Instrumentation for Measurement of Terrestrial Gamma Radiation | |
| Alkaline Secondary Cells and Batteries Sealed Nickel-Cadmium Rechargeable Monobloc Batteries in Button Cell Design | |
| Alternating Current Disconnectors Bus-Transfer Current Switching by Disconnectors | |
| ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) | |
| Amendement 1 D.C. or A.C. Supplied Electronic Step-Down Convertors for Filament Lamps General and Safety Requirements | |
| AMENDEMENT 2 Measurement of smoke density of cables burning under defined conditions \x96 Part 1: Test apparatus | |
| Amendment 1 Alternating Current Disconnectors Bus-Transfer Current Switching by Disconnectors | |
| AMENDMENT 1 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements | |
| Amendment 1 Cable Trunking and Ducting Systems for Electrical Installations Part 1: General Requirements | |
| AMENDMENT 1 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-1: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting on walls... | |
| AMENDMENT 1 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor,... | |
| AMENDMENT 1 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-3: Particular requirements \x96 Slotted cable trunking systems intended fo installation in cabinets | |
| AMENDMENT 1 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-4: Particular requirements \x96 Service poles and service posts | |
| Amendment 1 Connectors for electronic equipment \x96 Part 2-101: Circular connectors \x96 Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications | |
| AMENDMENT 1 Connectors for electronic equipment \x96 Product requirements \x96 Part 1: Generic specification | |
| AMENDMENT 1 Connectors for electronic equipment \x96 Product requirements \x96 Part 4-116: Printed board connectors \x96 Detail specification for a high-speed two-part connector with integrated shielding function | |
| AMENDMENT 1 Electroacoustics \x96 Measurement microphones \x96 Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique | |
| AMENDMENT 1 Global maritime distress and safety system (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test... | |
| AMENDMENT 1 Global maritime distress and safety system (GMDSS) \x96 Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment \x96 Operational and performance requirements, methods of... | |
| AMENDMENT 1 Global maritime distress and safety system (GMDSS) \x96 Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)... | |
| AMENDMENT 1 Global maritime distress and safety system (GMDSS) \x96 Part 7: Shipborne VHF radiotelephone transmitter and receiver \x96 Operational and performance requirements, methods of testing and required test results... | |
| Amendment 1 Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz | |
| AMENDMENT 1 Measurement of smoke density of cables burning under defined conditions \x96 Part 1: Test apparatus | |
| AMENDMENT 1 Measurement of smoke density of cables burning under defined conditions \x96 Part 2: Test procedure and requirements | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz - Horizontal floor wiring - Sectional... | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1: Generic specification | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Horizontal floor wiring \x96 Sectional... | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Work area wiring \x96 Sectional... | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Sectional specification for digital and... | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz \x96 Work area wiring \x96 Sectional... | |
| Amendment 1 Protection against electric shock \x96 Common aspects for installation and equipment | |
| Amendment 1 Round wire concentric lay overhead electrical stranded conductors | |
| AMENDMENT 1 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment | |
| AMENDMENT 1 Varistors for use in electronic equipment \x96 Part 2: Sectional specification for surge suppression varistors | |
| AMENDMENT 2 Global maritime distress and safety system (GMDSS) \x96 Part 12: Survival craft portable two-way VHF radiotelephone apparatus \x96 Operational and performance requirements, methods of testing and required test... | |
| AMENDMENT 2 Global maritime distress and safety system (GMDSS) \x96 Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)... | |
| Amendment 2 Switches for appliances \x96 Part 1: General requirements | |
| Analysis Techniques for Dependability - Reliability Block Diagram Method | |
| Audio, Video and Audiovisual Systems Domestic Digital Bus (D2B) | |
| Audiovisual Equipment and Systems - Rating Plates - Marking of Electricity Supply | |
| AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS | |
| Blankets of Insulating Material for Electrical Purposes | |
| Blanks for superabrasive cutting-off wheels Part 1: Manually guided cutting-off in building and civil engineering | |
| Blanks for superabrasive cutting-off wheels Part 2: Hand-held cutting-off in building and civil engineering | |
| Cable Trunking and Ducting Systems for Electrical Installations - Part 2: Particular Requirements - Section 1: Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceilings | |
| Cable Trunking and Ducting Systems for Electrical Installations - Part 2: Particular Requirements - Section 4: Service Poles | |
| Cable Trunking and Ducting Systems for Electrical Installations Part 1: General Requirements | |
| Cable trunking and ducting systems for electrical installations Part 2-2: Particular requirements Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations | |
| Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets | |
| CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT | |
| Calibration and Usage of Ionization Chamber Systems for Assay of Radionuclides | |
| Capacitors for power electronics | |
| Capacitors for use in tubular fluorescent and other discharge lamp circuits Performance requirements | |
| Certified Ratings Program - Airflow Measurement Performance | |
| Classification of insulating liquids (Commented Version) | |
| Classification of Insulating Liquids According to Fire-Point and Net Calorific Value | |
| Coatings for Loaded Printed Wire Boards (Conformal Coatings) - Part 3: Specifications for Individual Materials - Sheet 1: Coatings for General Purpose (Class I) and for High Reliability (Class II)... | |
| Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test CORRIGENDUM 1 | |
| Compact Disc Video System - 12 cm CD-V | |
| Compliance Test Procedures for Steady-State Availability | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-010: Circular connectors \x96 Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-011: Circular connectors \x96 Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-012: Circular connectors \x96 Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-111: Circular connectors \x96 Detail specification for power connectors with M12 screw-locking | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-114: Circular connectors \x96 Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-115: Circular connectors \x96 Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-119: Rectangular connectors \x96 Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-123: Rectangular connectors \x96 Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-124: Rectangular connectors \x96 Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-126: Rectangular connectors \x96 Detail specification for 5-way power connectors for industrial environments with push-pull locking | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-100: Power connectors \x96 Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-101: Power connectors \x96 Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-102: Power connectors \x96 Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-103: Power connectors \x96 Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-105: Power connectors \x96 Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for 63 A... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-106: Power connectors \x96 Detail specification for 2-poles push-pull coupling rectangular connectors with fuses, for 400 V DC rated... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-107: Power connectors \x96 Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-108: Power connectors \x96 Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-109: Power connectors \x96 Detail specification for 2P 130 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-111: Power connectors \x96 Detail specification for 3-pole snap locking rectangular connectors with IP65/IP67 plastic housing for rated current... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part Part 8-104: Power connectors \x96 Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking... | |
| CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT \x96 PRODUCT REQUIREMENTS Part 3-124: Rectangular connectors \x96 Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies... | |
| Connectors for electrical and electronic equipment \x96 Product requirements Part 8-112: Power connectors \x96 Detail specification for 2-pole snap locking rectangular connectors with IP65/IP67 plastic housing for rated current of... | |
| Connectors for Electronic Equipment - Part 2-001: Circular Connectors - Blank Detail Specification | |
| Connectors for Electronic Equipment - Part 2-102: Circular Connectors with Assessed Quality - Detail Specification for Plugs and Jacks for External Low Voltage Power Supply | |
| Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specification for Shielded Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part with... | |
| Connectors for Electronic Equipment - Part 4-108: Printed Board Connectors with Assessed Quality - Detail Specification for Cable-to-Board Connectors with a Modular Pitch of 25 mm and Integrated Shielding Function,... | |
| Connectors for Electronic Equipment - Part 4-110: Printed Board Connectors with Assessed Quality - Detail Specification for Latched Cable Connector System Having a Basic Grid of 2,0 mm Including Full... | |
| Connectors for Electronic Equipment - Part 4-111: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Power Connector Modules, for Printed Boards and Backplanes Having Early Mating Features,... | |
| Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification | |
| CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS | |
| Connectors for electronic equipment - Product requirements \x96 Part 3-120: Rectangular connectors \x96 Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and... | |
| Connectors for electronic equipment \x96 Part 2-101: Circular connectors \x96 Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications | |
| Connectors for electronic equipment \x96 Part 3-104: Rectangular connectors \x96 Detail specification for 8-way, hielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum | |
| Connectors for electronic equipment \x96 Part 3-112: Rectangular connectors \x96 Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment | |
| Connectors for electronic equipment \x96 Printed board connectors \x96 Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-101: Circular connectors \x96 Detail specification for M12 connectors with screw-locking CORRIGENDUM 1 | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-104: Circular connectors \x96 Detail specification for circular connectors with M8 screw-locking or snap-locking | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-105: Circular connectors \x96 Detail specification for M5 connectors with screw-locking | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-106: Circular connectors \x96 Detail specification for connectors M 16 \xd7 0,75 with screw-locking and degree of protection IP40 or IP65/67... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-109: Circular connectors \x96 Detail specification for connectors with M 12 \xd7 1 screw-locking, for data transmission frequencies up to 500... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-113: Circular connectors \x96 Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2\x96107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-106: Rectangular connectors \x96 Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-110: Rectangular connectors \x96 Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-114: Rectangular connectors \x96 Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-115: Rectangular connectors \x96 Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-116: Rectangular connectors \x96 Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-117: Rectangular connectors \x96 Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-118: Rectangular connectors \x96 Detail specification for a 4 pole plus PE power connector with push-pull coupling | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 4-116: Printed board connectors \x96 Detail specification for a high-speed two-part connector with integrated shielding function | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 7-100: Cable outlet accessories \x96 Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or... | |
| Connectors for electronic equipment Part 2-103: Circular connectors Detail specification for a range of multipole connectors (type \xb4XLR\xb4) | |
| Connectors for electronic equipment Part 3-103: Rectangular connectors Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)... | |
| Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector with integrated shielding function having a grid of 1 mm 1,5 mm | |
| Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment | |
| Connectors for electronic equipment Part 7-001: Cable outlet accessories Blank detail specification | |
| Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications - Part 4-103: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Connectors with Shielding... | |
| Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications - Part 4-104: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Connectors, Basic Grid... | |
| Connectors for Use in D.C., Low Frequency Analogue and Digital High-Speed Data Applications - Part 5: In-Line Sockets with Assessed Quality - Sectional Specification | |
| Connectors for Use in d.c., Low-Frequency Analogue and Digital High-Speed Data Applications - Part 3-001: Rectangular Connectors with Assessed Quality - Blank Detail Specification | |
| Connectors for Use in d.c., Low-Frequency Analogue and Digital High-Speed Data Applications - Part 3-100: Rectangular Connectors with Assessed Quality - Detail Specification for a Range of Shielded Connectors with... | |
| Connectors for Use in d.c., Low-Frequency Analogue and Digital High-Speed Data Applications - Part 3: Rectangular Connectors with Assessed Quality - Sectional Specification | |
| Connectors for Use in D.C., Low-Frequency Analogue and Digital High-Speed Data Applications - Part 7: Cable Outlet Accessories with Assessed Quality, Including Qualification and Capability Approval - Sectional Specification | |
| Connectors with Assessed Quality for Use in D.C. and Low Frequency Analogue Applications and in Digital Applications with High Speed Data Rates - Part 4: Printed Board Connectors - Section... | |
| Connectors with Assessed Quality for Use in d.c., Low-Frequency Analogue and in Digital High Speed Data Applications - Part 4: Printed Board Connectors - Section 102: Detail Specification for Two-Part... | |
| Connectors with Assessed Quality, for Use in D.C. Low-Frequency Analogue and in Digital High Speed Data Applications - Part 4: Printed Board Connectors - Section 101: Detail Specification for Two-Part... | |
| Connectors with Assessed Quality, for Use in D.C., Low Frequency Analogue and in Digital High Speed Data Applications - Part 1: Generic Specification | |
| Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High Speed Data Applications - Part 4: Printed Board Connectors - Section 105: Detail Specification for 9... | |
| Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 3: Rectangular Connectors - Section 101: Detail Specification for a Range of... | |
| Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Printed Board Connectors - Section 001: Blank Detail Specification | |
| Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Sectional Specification - Printed Board Connectors | |
| Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital highspeed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of... | |
| Construction navale - Treuils de p\xeache | |
| CORRIGENDUM 1 Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits Performance Requirements | |
| CORRIGENDUM 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz-horizontal floor wiring \x96 Sectional specification | |
| D.C. or A.C. Supplied Electronic Step-Down Convertors for Filament Lamps - Performance Requirements | |
| Data Exchange for Meter Reading, Tariff and Load Control - Direct Local Data Exchange | |
| Data Exchange for Meter Reading, Tariff and Load Control - Local Bus Data Exchange | |
| Decca Navigator System: Receivers for Ships Minimum Performance Standards - Methods of Testing and Required Test Results First Edition | |
| Design Guide for Vehicle Spur and Helical Gears (Metric Edition) | |
| Design, Location and Application Criteria for Installed Area Gamma Radiation Dose Rate Monitoring Equipment for Use in Nuclear Power Plants During Normal Operation and Anticipated Operational Occurrences | |
| Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry | |
| Digital Audio Tape Cassette System (DAT) Part 1: Dimensions and Characteristics | |
| Digital Audio Tape Cassette System (DAT) Part 3: DAT Tape Properties | |
| Digital Audio Tape Cassette System (DAT) Part 5: DAT for Professional Use | |
| Digital Audio Tape Cassette System (DAT) Part 6: Serial Copy Management System | |
| Digital Audio Tape Cassette System Part 2: DAT Calibration Tape | |
| Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 1: General Requirements | |
| Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 2: Format A | |
| Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 3: Format B | |
| Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 4: Magnetic Tape Properties: Definitions and Methods of Measurement | |
| Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 5: Reels | |
| Digital Data Communications for Measurement and Control - Field bus for Use in Industrial Control Systems - Part 4: Data Link Protocol Specification | |
| Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 3: Data Link Service Definition | |
| Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 5: Application Layer Service Definition | |
| Digital data communications for measurement and control \x96 Fieldbus for use in industrial control systems \x96 Part 2: Physical layer specification and service definition CORRIGENDUM 1 | |
| Digital data communications for measurement and control \x96 Fieldbus for use in industrial control systems \x96 Part 4: Data link protocol specification CORRIGENDUM 1 | |
| Digital Recorders for Measurements in High-Voltage Impulse Tests - Part 2: Evaluation of Software Used for the Determination of the Parameters of Impulse Waveforms | |
| Dimensions of Metal-Sheathed Thermometer Elements | |
| Economic Optimization of Power Cable Size | |
| Electric Traction - Rolling Stock - Test Methods for Electric and Thermal/Electric Rolling Stock on Completion of Construction and Before Entry into Service | |
| Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial- Process Control Systems - Guidance for Inspection and Routine Testing | |
| ELECTRICAL MEASURING INSTRUMENTS - X-T RECORDERS - PART 1: DEFINITIONS AND REQUIREMENTS | |
| Electrical Measuring Instruments - X-t Recorders Part 2: Recommended Additional Test Methods | |
| Electricity Metering - Tariff and Load Control - Particular Requirements for Electronic Ripple Control Receivers | |
| Electricity Metering - Tariff and Load Control - Particular Requirements for Time Switches | |
| Electroacoustics - Instruments for the Measurement of Sound Intensity - Measurement with Pairs of Pressure Sensing Microphones | |
| ELECTROACOUSTICS \x96 MEASUREMENT MICROPHONES \x96 Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique | |
| ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES | |
| Electromechanical Equipment Guide for Small Hydroelectric Installations | |
| Expression of Performance of Sample Handling Systems for Process Analyzers | |
| Farm Milk Cooling and Storage Systems | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRESAND CABLES - PART 1: GENERIC SPECIFICATION | |
| Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification | |
| Fixed film resistor networks for use in electronic equipment - Part 2: Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. | |
| Fixed film resistor networks for use in electronic equipment - Part 2: Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure | |
| Fraises isoc\xe8les \xe0 al\xe9sage lisse et entra\xeenement par clavette | |
| Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition) | |
| General Classification of Insulating Liquids | |
| General purpose lead-acid batteries (valveregulated types) \x96 Part 2: Dimensions, terminals and marking | |
| Glass and Glass Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Type 1, 2 and 3 Tapes | |
| Global Maritime Distress and Safety System (GMDSS) - Part 10: Inmarsat-B Ship Earth Station Equipment - Operational and Performance Requirements, Methods of Testing and Required Test Results | |
| Global Maritime Distress and Safety System (GMDSS) - Part 12: Survival Craft Portable Two-Way VHF Radiotelephone Apparatus - Operational and Performance Requirements, Methods of Testing and Required Test Results | |
| Global Maritime Distress and Safety System (GMDSS) - Part 1: Radar Transponder - Marine Search and Rescue (SART) - Operational and Performance Requirements, Methods of Testing and Required Test Results... | |
| Global Maritime Distress and Safety System (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite Emergency Position Indicating Radio Beacon Operating on 406 MHz - Operational and Performance Requirements, Methods of... | |
| Global Maritime Distress and Safety System (GMDSS) - Part 3: Digital Selective Calling (DSC) Equipment - Operational and Performance Requirements, Methods of Testing and Required Testing Results | |
| Global Maritime Distress and Safety System (GMDSS) - Part 4: INMARSAT-C Ship Earth Station and INMARSAT Enhanced Group Call (EGC) Equipment - Operational and Performance Requirements, Methods of Testing and... | |
| Global Maritime Distress and Safety System (GMDSS) - Part 5: Inmarsat-E - Emergency Position Indicating Radio Beacon (EPIRB) Operating Through the Inmarsat System - Operational and Performance Requirements, Methods of... | |
| Global Maritime Distress and Safety System (GMDSS) - Part 6: Narrowband Direct- Printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings and Urgent Information to Ships (NAVTEX) -... | |
| Global Maritime Distress and Safety System (GMDSS) - Part 8: Shipborne Watchkeeping Receivers for the Reception of Digital Selective Calling (DSC) in the Maritime MF, MF/HF and VHF Bands -... | |
| Global Maritime Distress and Safety System (GMDSS) - Part 9: Shipborne Transmitters and Receivers for Use in MF and HF Bands Suitable for Telephony, Digital Selective Calling (DSC) and Narrow... | |
| Global maritime distress and safety system (GMDSS) \x96 Part 12: Survival craft portable two-way VHF radiotelephone apparatus \x96 methods oftesting and required test results | |
| Global maritime distress and safety system (GMDSS) \x96 Part 14: AIS search and rescue transmitter (AIS-SART) \x96 Operational and performance requirements, methods of testing and required test results | |
| Global maritime distress and safety system (GMDSS) \x96 Part 15: Inmarsat FB500 ship earth station \x96 Operational and performance requirements, methods of testing and required test results | |
| Global maritime distress and safety system (GMDSS) \x96 Part 16: Ship earth stations operating in mobile-satellite systems recognized for use in the GMDSS \x96 Operational and performance requirements, methods of... | |
| GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS) \x96 Part 2: Cospas-Sarsat EPIRB \x96 Emergency Position Indicating Radio Beacon Operating On 406 Mhz \x96 Operational And Performance Requirements, Methods Of Testing... | |
| Global maritime distress and safety system (GMDSS) \x96 Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment \x96 Operational and performance requirements, methods of testing and... | |
| Global maritime distress and safety system (GMDSS) Part 13: INMARSAT F77 ship earth station equipment Operational and performance requirements, methods of testing and required test results | |
| Global maritime distress and safety system (GMDSS) Part 7: Shipborne VHF radiotelephone transmitter and receiver Operational and performance requirements, methods of testing and required test results | |
| Global Navigation Satellite Systems (GNSS) - Part 1: Global Positioning System (GPS) - Receiver Equipment - Performance Standards, Methods of Testing and Required Test Results First Edition | |
| GUIDANCE FOR DESIGN OF AIRCRAFT EQUIPMENT AND SOFTWARE FOR USE IN TRAINING DEVICES | |
| Guidance for the Design and Installation of Fuel Quantity Systems | |
| GUIDANCE FOR USE OF AVIONICS EQUIPMENT AND SOFTWARE IN SIMULATORS | |
| Guide for Emergency and Safety Operations at Motorsports Venues | |
| Guide for Evaluating the Discharges from a Charged Surface First Edition | |
| Guide to the Measurement of Equivalent Electrical Parameters of Quartz Crystal Units | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type Beta format - FM audio recording - Part 1: 625 line-50 field systems | |
| Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type Beta Format - FM Audio Recording Part 2: 525 Line-60 Field Systems | |
| Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - Compact VHS Video Cassette | |
| Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - FM Audio Recording | |
| Helican-Scan Video Type Cassette System Using 12,65 mm (0,5 in) Magnetic Tape - Type M2 | |
| IEC 1052 FASTBUS STANDARD ROUTINES Standard Routines for Use with FASTBUS Data Acquisition System | |
| INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION | |
| Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements | |
| Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements | |
| Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-11: Data-link layer service definition \x96 Type 11 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-12: Data-link layer service definition \x96 Type 12 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-13: Data-link layer service definition \x96 Type 13 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-14: Data-link layer service definition \x96 Type 14 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-16: Data-link layer service definition \x96 Type 16 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-17: Data-link layer service definition \x96 Type 17 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-18: Data-link layer service definition \x96 Type 18 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-19: Data-link layer service definition \x96 Type 19 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-1: Data-link layer service definition \x96 Type 1 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-20: Data-link layer service definition \x96 Type 20 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-21: Data-link layer service definition \x96 Type 21 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-22: Data-link layer service definition \x96 Type 22 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-24: Data-link layer service definition \x96 Type-24 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-25: Data-link layer service definition \x96 Type 25 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-28: Data-link layer service definition \x96 Type 28 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-2: Data-link layer service definition \x96 Type 2 elements AMENDMENT 1 | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-2: Data-link layer service definition \x96 Type 2 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-4: Data-link layer service definition \x96 Type 4 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-7: Data-link layer service definition \x96 Type 7 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-8: Data-link layer service definition \x96 Type 8 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-11: Data-link layer protocol specification \x96 Type 11 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-12: Data-link layer protocol specification \x96 Type 12 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-13: Data-link layer protocol specification \x96 Type 13 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-14: Data-link layer protocol specification \x96 Type 14 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-16: Data-link layer protocol specification \x96 Type 16 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-17: Data-link layer protocol specification \x96 Type 17 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-18: Data-link layer protocol specification \x96 Type 18 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-19: Data-link layer protocol specification \x96 Type 19 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-20: Data-link layer protocol specification \x96 Type 20 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-21: Data-link layer protocol specification \x96 Type 21 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-22: Data-link layer protocol specification \x96 Type 22 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-24: Data-link layer protocol specification \x96 Type 24 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-25: Data-link layer protocol specification \x96 Type 25 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-28: Data-link layer protocol specification \x96 Type 28 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-4: Data-link layer protocol specification \x96 Type 4 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-7: Data-link layer protocol specification \x96 Type 7 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-8: Data-link layer protocol specification \x96 Type 8 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-10: Application layer service definition \x96 Type 10 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-11: Application layer service definition \x96 Type 11 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-12: Application layer service definition \x96 Type 12 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-13: Application layer service definition \x96 Type 13 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-14: Application layer service definition \x96 Type 14 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-15: Application layer service definition \x96 Type 15 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-16: Application layer service definition \x96 Type 16 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-17: Application layer service definition \x96 Type 17 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-18: Application layer service definition \x96 Type 18 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-19: Application layer service definition \x96 Type 19 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-20: Application layer service definition \x96 Type 20 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-21: Application layer service definition \x96 Type 21 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-22: Application layer service definition \x96 Type 22 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-23: Application layer service definition \x96 Type 23 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-2: Application layer service definition \x96 Type 2 elements | |
| Industrial Hard Real-Time Communication | |
| Industrial networks \x96 Single-drop digital communication interface \x96 Part 2: Functional safety extensions | |
| Industrial networks \x96 Single-drop digital communication interface \x96 Part 3: Wireless extensions | |
| Industrial Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 6: Assessment of System Operability | |
| Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 3: Assessment of System Functionality | |
| Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 5: Assessment of System Dependability | |
| Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 7: Assessment of System Safety | |
| Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 8: Assessment of Non-Task-Related System Properties | |
| Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 1: General Considerations and Methodology | |
| Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 2: Assessment Methodology | |
| INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE | |
| Installed Personnel Surface Contamination Monitoring Assemblies for Alpha and Beta Emitters First Edition | |
| Instruments and software used for measurement in high-voltage and high-current tests \x96 Part 3: Requirements for hardware for tests with alternating and direct voltages and currents | |
| INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES | |
| INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA | |
| Insulators for overhead lines \x96 Composite suspension and tension insulators with AC voltage greater than 1 000 V and DC voltage greater than 1 500 V \x96 Definitions, test methods... | |
| LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS | |
| Loran-C Receivers for Ships Minimum Performance Standards - Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Global Navigation Satellite Systems (GNSS) - Part 2: Global Navigation Satellite System (GLONASS) - Receiver Equipment - Performance Standards, Methods of Testing... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Global navigation satellite systems (GNSS) \x96 Part 3: Galileo receiver equipment \x96 Performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Global navigation satellite systems (GNSS) \x96 Part 5: BeiDou navigation satellite system (BDS) \x96 Receiver equipment \x96 Performance requirements, methods of testing... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Global navigation satellite systems (GNSS) \x96 Part 6: Navigation with Indian constellation (NavIC)/Indian regional navigation satellite system (IRNSS) \x96 Receiver equipment \x96... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Global navigation satellite systems (GNSS) \x96 Part 7: Satellite based augmentation system (SBAS) L1 \x96 Receiver equipment \x96 Performance standards, methods of... | |
| Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment Performance requirements, methods of testing and required... | |
| Matting of Insulating Material for Electrical Purposes | |
| Measurement and Characterisation of Ultrasonic Fields Using Hydrophones in the Frequency Range 0,5 MHz to 15 MHz | |
| Measurement Microphone Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique | |
| Measurement Microphones - Part 1: Specifications for Laboratory Standard Microphones | |
| Measurement Microphones - Part 5: Methods for Pressure Calibration of Working Standard Microphones by Comparison | |
| Measurement microphones \x96 Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison | |
| Measurement Microphones Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique | |
| Measurement Microphones Part 4: Specifications for Working Standard Microphones | |
| Measurement microphones Part 6: Electrostatic actuators for determination of frequency response | |
| Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 2: Test Procedure and Requirements CORRIGENDUM 1 | |
| Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 2: Test Procedure and Requirements | |
| Measurement of smoke density of cables burning under defined conditions \x96 Part 2: Test procedure and requirements | |
| Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 1: Test Apparatus First Edition | |
| Method for Calculating Reduction Factors for Groups of Cables in Free Air, Protected from Solar Radiation | |
| METHOD FOR EVALUATING THE LOW TEMPERATURE FLOW PROPERTIES OF MINERAL INSULATING OILS AFTER AGEING | |
| Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 1: Radio-Frequency Measurements on Outdoor Units First Edition | |
| Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 2: Electrical Measurements on DBS Tuner Units | |
| Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 3: Electrical Measurements of Overall Performance of Receiver Systems Comprising an Outdoor Unit and a... | |
| Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 4: Electrical Measurements on Sound/Data Decoder Units for the Digital Subcarrier NTSC System | |
| Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 5: Electrical Measurements on Decoder Units for MAC/Packet Systems | |
| Methods of Measurement on Receiving Antennas for Satellite Broadcast Transmission in the 11/12 GHz Band - Part 2: Mechanical and Environmental Tests on Individual and Collective Receiving Antennas | |
| METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS | |
| Methods of Test for Evaluating the Resistance of Insulating Materials Against the Initiation of Electrical Trees First Edition | |
| Moulded Plastics Footwear - Lined or Unlined Poly (Vinyl Chloride) Industrial Boots with Chemical Resistance - Specification | |
| Moulded Plastics Footwear - Lined or Unlined Poly (Vinyl Chloride) Industrial Boots with General-Purpose Resistance to Animal Fats and Vegetable Oils - Specification | |
| Multicore and symmetrical pair/ quad cables for digital communications \x96 Part 15: Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to... | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 1-1: Capability Approval - Generic Specification | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 1-2: Work Area Wiring - Capability Approval - Sectional Specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 1: Work Area Wiring - Section 1: Blank Detail Specification | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 2-2: Horizontal Floor Wiring - Capability Approval - Sectional Specification | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 2: Horizontal Floor Wiring - Section 1: Blank Detail Specification | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 2: SYMMETRICAL PAIR/QUAD CABLES WITH TRANSMISSION CHARACTERISTICS UP TO 100 MHZ - HORIZONTAL FLOOR WIRING - SECTIONAL SPECIFICATION | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 3: WORK AREA CABLE - SECTIONAL SPECIFICATION | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 4-1: Riser Cables - Blank Detail Specification | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 4-2: Riser Cables - Capability Approval - Sectional Specification | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 4: RISER CABLES - SECTIONAL SPECIFICATION | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 5-2: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Horizontal Floor Wiring - Capability Approval - Section... | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 5-: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Horizontal Floor Wiring - Capability Approval - Blank... | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 5: Symmetrical Pair/Quad Cables with Transmission Characteristics Up to 600 MHz - Horizontal Floor Wiring - Sectional Specification | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 6-1: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Work Area Wiring - Blank Detail Specification | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 6-2: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Work Area Wiring - Capability Approval - Sectional... | |
| Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 6: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Work Area Wiring - Sectional Specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 10: Cables for cords with transmission characteristics up to 2 GHz \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 12: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 12: Symmetrical single pair cables with transmission characteristics up to 600 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 13: Symmetrical single pair cables with transmission characteristics up to 20 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 14: Symmetrical single pair cables with transmission characteristics up to 20 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1: Generic specification CORRIGENDUM 1 | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1: Generic specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Horizontal floor wiring \x96 Sectional specification CORRIGENDUM... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Work area wiring \x96 Sectional specification | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS \x96 Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Blank detail specification for digital and analog... | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS \x96 Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Quality assessment procedure \x96 Sectional specification for... | |
| MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS \x96 Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Sectional specification for digital and analog communication... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Sectional specification for digital and analogue communication... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 8: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 9: Cables for channels with transmission characteristics up to 2 GHz \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz Blank detail specification for digital and analog communication cables... | |
| Multicore and symmetrical pair/quad cables for digital communications Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz Quality assessment procedure Sectional specification for digital and analog... | |
| Multicore and symmetrical pair/quad cables for digital communications Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz Sectional specification for digital and analog communication cables | |
| NEUTRON AND GAMMA-RAY FLUX-TO-DOSE-RATE FACTORS (WITHDRAWN) | |
| Non-broadcast video tape recorders - Methods of measurement - Part 3: Audio characteristics for FM recording | |
| Non-Broadcast Video Tape Recorders - Methods of Measurement - Part 4: Calibration Tape (NTSC/PAL/SECAM) | |
| Non-Broadcast Video Tape Recorders - Methods of Measurement - Part 5: High-Band Video Tape Recorders, Including Those Equipped with Y/C Video Connectors (NTSC/PAL) | |
| Non-broadcast video tape recorders - Methods of measurements - Part 2: Video characteristics chrominance SECAM | |
| Non-broadcast video tape recorders. Methods of measurement - Part 1: General, video (NTSC/PAL) and audio (longitudinal) characteristics | |
| Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Sheets Produced from Beech Veneer | |
| Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Rings Produced from Beech Veneer | |
| Nuclear Instrumentation - Amplifiers and Preamplifiers Used with Detectors of Ionizing Radiation - Test Procedures | |
| Opportunity-Charging of Lead-Acid Traction Batteries | |
| Performance Rating Of Central System Humidifiers for Residential Applications | |
| Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Tapes Woven on Conventional or Shuttleless Looms | |
| Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part 1: General Requirements, Functional Characteristics - Methods of Test | |
| Portable Lead-Acid Cells and Batteries (Valve-Regulated Types)- Part 2: Dimensions, Terminals and Marking First Edition | |
| Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation | |
| Power Electronic Capacitors Part 1: General | |
| PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES | |
| Preparation of Documents Used in Electrotechnology - Part 3: Connection Diagrams, Tables and Lists | |
| Preparation of Documents Used in Electrotechnology - Part 4: Location and Installation Documents | |
| Preparation of documents used in electrotechnology \x96 Part 1: Rules | |
| Preparation of Documents Used in Electrotechnology Part 2: Function-Oriented Diagrams | |
| PROCEDURE FOR USE IN THE PREPARATION OF MAXIMUM LAMP OUTLINES | |
| Produits abrasifs - V\xe9rification de la dimension des grains de superabrasifs | |
| Produits abrasifs agglom\xe9r\xe9s - Balourds admissibles des meules en \xe9tat de livraison - Contr\xf4le statique | |
| Produits superabrasifs - Meules rotatives \xe0 base de diamant ou de nitrure de bore - G\xe9n\xe9ralit\xe9s , d\xe9signation et nomenclature multilingue | |
| Programmable Controllers - Part 1: General Information | |
| Programmable controllers - Part 2: Equipment requirements and tests CORRIGENDUM 1 | |
| Programmable Controllers - Part 4: User Guidelines First Edition | |
| Programmable Controllers - Part 5: Communications | |
| Programmable Controllers - Part 7: Fuzzy Control Programming | |
| Programmable controllers \x96 Part 10: PLC open XML exchange format | |
| Programmable controllers \x96 Part 6: Functional safety | |
| Programmable controllers \x96 Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | |
| Protection against electric shock \x96 Common aspects for installations and equipment | |
| Protection Against Electric Shock Common Aspects for Installation and Equipment | |
| Qualit\xe9 de l'eau \x97 Vocabulaire | |
| Radiation Protection Instrumentation - Installed Personnel Surface Contamination Monitoring Assemblies - Low Energy X and Gamma Emitters | |
| Railway applications \x96 Rolling stock \x96 Testing of rolling stock on completion of construction and before entry into service | |
| Reference Tapes for Video Tape Recorder Systems | |
| Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity | |
| Reliability testing \x96 Compliance tests for constant failure rate and constant failure intensity | |
| Reliability Testing Compliance Test Plans for Success Ratio | |
| Requirements for the Declaration of the Acoustic Output of Medical Diagnostic Ultrasonic Equipment | |
| Round Wire Concentric Lay Overhead Electrical Stranded Conductors First Edition | |
| Rubber Footwear - Lined or Unlined Rubber Industrial Boots with Chemical Resistance | |
| SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-8: PARTICULAR REQUIREMENTS FOR SINGLE SPINDLE VERTICAL MOULDERS | |
| Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws | |
| Seismic Design of Piers and Wharves | |
| Semiconductor Power Convertors - Adjustable Speed Electric Drive Systems - General Requirements Part 1: Rating Specifications, Particularly for D.C. Motor Drives | |
| Specif ication for non-impregnated, densified laminated wood for electrical purposes Part 1: Definitions, designation and general requirements | |
| Specification for Coatings for Loaded Printed Wire Boards (Conformal Coatings) Part 1: Definitions, Classification and General Requirements | |
| Specification for Coatings for Loaded Printed Wire Boards (Conformal Coatings) Part 2: Methods of Test | |
| Specification for conduit fittings for electrical installations - Part 1: General requirements | |
| Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 1: Metal conduit fittings | |
| Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 2: Conduit fittings of insulating material | |
| Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 3: Fittings for flexible conduits of metal, insulating or composite materials and for pliable conduits of... | |
| Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy | |
| Specification for Glass and Glass Polyester Fibre Woven Tapes Part 1: Definitions, Classification and General Requirements | |
| Specification for Glass and Glass Polyester Fibre Woven Tapes Part 2: Methods of Test | |
| Specification for Non-Impregnated, Densified Laminated Wood for Electrical Purposes Part 2: Methods of Test First Edition | |
| Specification for Polyester Fibre Woven Tapes Part 1: Definitions, Designation and General Requirements | |
| Specification for Polyester Fibre Woven Tapes Part 2: Methods of Test | |
| Splices for Optical Fibres and Cables - Part 4: Sectional Specification - Mechanical Splices for Optical Fibres and Cables First Edition; (IECQ QC 850300) | |
| Splices for Optical Fibres and Cables Part 2: Sectional Specification - Splice Organizers and Closures for Optical Fibres and Cables First Edition; (IECQ QC 850100) | |
| Splices for Optical Fibres and Cables Part 3: Sectional Specification - Fusion Splices for Optical Fibres and Cables First Edition; (IECQ QC 850200) | |
| Standard for Gearmotor, Shaft Mounted and Screw Conveyor Drives | |
| Standard for Industrial Enclosed Gear Drives (Metric Edition) | |
| Standard for Spur, Helical, Herringbone and Bevel Enclosed Drives | |
| Standard Glossary of Computer Graphics Terminology | |
| Standard Glossary of Computer Networking Terminology | |
| Standard Glossary of Data Management Terminology | |
| Standard Glossary of Image Processing and Pattern Recognition Terminology | |
| Standard Glossary of Modeling and Simulation Terminology | |
| Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment | |
| Still Video Floppy Disk Magnetic Recording System | |
| Switches for appliances - Part 1: General requirements | |
| Switches for Appliances - Part 2-4: Particular Requirements for Independently Mounted Switches First Edition | |
| Switches for appliances \x96 Part 1: General requirements CORRIGENDUM 1 | |
| Switches for appliances \x96 Part 2-4: Particular requirements for independently mounted switches | |
| Switches for appliances \x96 Part 2-5: Particular requirements for change-over selectors | |
| Switches for appliances \x96 Part 2-6: Particular requirements for switches used in electric motoroperated hand-held tools, transportable tools and lawn and garden machinery | |
| System Omega and Differential Omega Receivers for Ships - Operational and Performance Requirements - Methods of Testing and Required Test Results First Edition | |
| Terminal Markings for Valve Device Stacks and Assemblies and for Power Convertor Equipment | |
| Test Method for the Determination of Oxygen Index of Insulating Liquids | |
| TEST METHODS FOR THE DETERMINATION OF BOND STRENGTH OF IMPREGNATING AGENTS TO AN ENAMELLED WIRE SUBSTRATE | |
| Test Probes to Verify Protection by Enclosures | |
| Thermoluminescence Dosimetry Systems for Personal and Environmental Monitoring | |
| TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1 000 V (GENERALLY CALL NEON-TRANSFORMERS). GENERAL AND SAFETY REQUIREMENTS | |
| UL Standard for Safety Programmable Controllers \x96 Part 2: Equipment Requirements and Tests | |
| UL Standard for Safety Switches for Appliances - Part 2-5: Particular Requirements for Change - Over Selectors | |
| UL Standard for Safety Switches for Appliances - Part 2-6: Particular Requirements for Switches Used In Electric Motor-Operated Hand - Held Tools, Transportable Tools and Lawn and Garden Machinery | |
| UL Standard for Safety Switches for Appliances \x96 Part 1-1: Requirements for Mechanical Switches | |
| UL Standard for Safety Switches for Appliances \x96 Part 1-2: Requirements for Electronic Switches | |
| UL Standard for Safety Switches for Appliances \x96 Part 2-1: Particular Requirements for Cord Switches | |
| UL Standard for Safety Switches for Appliances | |
| Underdeposit Corrosion (UDC) Testing and Mitigation Methods in the Oil and Gas Industry | |
| Unused Hydrocarbon-Based Insulating Liquids - Test Methods for Evaluating the Oxidation Stability | |
| Uses of Infra-Red Transmission and the Prevention or Control of Interference Between Systems | |
| Varistors for use in electronic equipment - Part 1: Generic specification | |
| Varistors for use in electronic equipment - Part 2: Blank detail specification for zinc oxide surge suppression varistors. Assessment level E | |
| Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors | |
| Varistors for use in electronic equipment \x96 Part 1: Generic specification | |
| Varistors for Use in Electronic Equipment Part 2: Blank Detail Specification for Silicon Carbide Surge Suppression Varistors - Assessment Level E | |
| Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement - Part 1: Non-Broadcast Single-Sensor Cameras | |
| Video Cameras (PAL/SECAM/NTSC) - Methods of Measurements - Part 3: Non-Broadcast Camera-Recorders | |
| Video Cameras (PAL/SECAM/NTSC) - Methods of Measurements - Part 4: Automatic Functions of Video Cameras and Camera-Recorders | |
| Video cameras (PAL/SECAM/NTSC) Methods of measurement Part 2: Two- and three-sensor professional cameras | |
| Videodisks - Methods of Measurement for Parameters | |
| Water Quality - Vocabulary - Part 1 | |
| Water quality - Vocabulary - Part 2 | |
| Water quality - Vocabulary - Part 3 | |
| Water Quality - Vocabulary - Part 4 | |
| Water Quality - Vocabulary - Part 5 | |
| Water Quality - Vocabulary - Part 6 | |
| Water Quality - Vocabulary - Part 7 | |
| Water Quality - Vocabulary - Part 8 | |
| Water Quality - Vocabulary - Part 9: Alphabetical List and Subject Index | |
| Water quality \x97 Vocabulary \x97 Part 2 AMENDMENT 1 | |
| Water quality \x97 Vocabulary \x97 Part 3 AMENDMENT 1 |
| << Prev | Next >> |