Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
60
69
70
71
72
73
74
75
76
77
78
79
80
81
90
100
110
120
130
140
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| Alternating Current Static Var-Hour Meters for Reactive Energy (Classes 2 and 3) | |
| AMENDMENT 1 Electroacoustics \x96 Octave-band and fractional-octave-ba nd filters \x96 Part 2: Pattern-evaluation tests | |
| AMENDMENT 1 Electrostatics \x96 Part 2-1: Measurement methods \x96 Ability of materials and products to dissipate static electric charge | |
| AMENDMENT 1 Electrostatics \x96 Part 4-1: Standard test methods for specific applications \x96 Electrical resistance of floor coverings and installed floors | |
| AMENDMENT 1 Electrostatics \x96 Part 4-4: Standard test methods for specific applications \x96 Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| AMENDMENT 1 Electrostatics \x96 Part 6-1: Electrostatic control in healthcare, commercial and public facilities \x96 Healthcare | |
| AMENDMENT 1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion | |
| AMENDMENT 1 Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 1: General and guidance | |
| AMENDMENT 1 Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-4: Tests \x96 Fibre or cable retention | |
| AMENDMENT 1 Fibre-optic communication subsystem test procedures \x96 Part 4-1: Installed cabling plant \x96 Multimode attenuation measurement | |
| AMENDMENT 1 Lamp control gear \x96 Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps | |
| AMENDMENT 1 Lamp Controlgear - Part 2-11: Particular Requirements for Miscellaneous Electronic Circuits Used with Luminaries | |
| AMENDMENT 1 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules | |
| AMENDMENT 1 Lamp controlgear \x96 Part 1: General and safety requirements | |
| AMENDMENT 1 Lamp controlgear \x96 Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) | |
| AMENDMENT 1 Lamp controlgear \x96 Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) | |
| AMENDMENT 1 Lamp controlgear \x96 Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) | |
| AMENDMENT 2 Electroacoustics - Specifications for Personal Sound Exposure Meters | |
| AMENDMENT 2 Lamp controlgear \x96 Part 1: General and safety requirements | |
| AMENDMENT 2 Lamp controlgear \x96 Part 2-1: Particular requirements for starting devices (other than glow starters) | |
| Calibration of Fibre Optic Power Meters | |
| Calibration of fibre-optic power meters | |
| Caoutchouc et plastiques - Analyse des trac\xe9s multi-pics obtenus lors des d\xe9terminations de la r\xe9sistance au d\xe9chirement et de la force d'adh\xe9rence | |
| Capacitors for microwave ovens - Part 1: General | |
| Ceramic Pressurized Hollow Insulators for High-Voltage Switchgear and Controlgear | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-10: Particular requirements \x96 Electronic controlgear for high-frequency operation of tubular cold-cathode discharge lamps (neon tubes) | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-12: Particular requirements \x96 DC or AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-1: Particular requirements \x96 Starting devices (other than glow starters) | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-3: Particular requirements \x96 AC or DC supplied electronic controlgear for fluorescent lamps | |
| CORRIGENDUM 1 Lamp control gear \x96 Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps | |
| CORRIGENDUM 1 Lamp Controlgear - Part 2-11: Particular Requirements for Miscellaneous Electronic Circuits Used with Luminaries | |
| Deep-Fat Fryers for Household Use - Methods for Measuring the Performance | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 3-1: Mains Signalling Requirements - Frequency Bands and Output Levels | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 3-22: Mains Signalling Requirements - MV Phase-to-Earth and Screen-to-Earth Intrusive Coupling Devices | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 3: Mains Signalling Requirements - Section 21: MV Phase-to-Phase Isolated Capacitive Coupling Device | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4-33: Data Communication Protocols - Data Link Layer - Connection Oriented Protocol | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4-511: Data Communication Protocols - Systems MAnagement - CIASE Protocol | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4-512: Data Communication Protocols - Systems Management Using Profile 61334-5-1 - Management Information Base (MIB) | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4-61: Data Communication Protocols - Network Layer - Connectionless Protocol | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 1: Reference Model of the Communication System | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 32: Data Link Layer - Logical Link Control (LLC) | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 41: Application Protocols - Distribution Line Message Specification | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 4: Data Communication Protocols - Section 42: Application Protocols - Application Layer | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 5-1: Lower Layer Profiles - The Spread Frequency Shift Keying (S-FSK) Profile | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 6: A-XDR Encoding Rule | |
| Electric Shavers for Household Use - Methods for Measuring the Performance | |
| ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) -... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) -... | |
| Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements CORRIGENDUM 1 | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 1: General requirements CORRIGENDUM 1 | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-1: Particular requirements \x96 Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-2: Particular requirements \x96 Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-2: Particular requirements \x96 Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-3: Particular requirements \x96 Test configuration, operational conditions and performance criteria for transducers with integrated or remote... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-4: Particular requirements \x96 Test configurations, operational conditions and performance criteria for insulation monitoring devices according to... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-5: Particular requirements \x96 Test configurations, operational conditions and performance criteria for field devices with field bus... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-5: Particular requirements \x96 Test configurations, operational conditions and performance criteria for field devices with interfaces according... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-6: Particular requirements \x96 In vitro diagnostic (IVD) medical equipment | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) \x96... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) \x96... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements | |
| ELECTRICAL INSULATING MATERIALS - METHOD TO EVALUATE THE RESISTANCE TO TRACKING AND EROSION - ROTATING WHEEL DIP TEST | |
| Electrical insulating materials and systems \x96 AC voltage endurance evaluation | |
| Electroacoustics - Instruments for Measurement of Aircraft Noise - Performance Requirements for Systems to Measure One-Third-Octave Band Sound Pressure Levels in Noise Certification of Transport-Category Aeroplanes | |
| Electroacoustics - Octave-Band and Fractional-Octave-Ba nd Filters | |
| Electroacoustics - Specifications for Personal Sound Exposure Meters | |
| Electroacoustics \x96 Octave-band and fractional-octave-ba nd filters \x96 Part 1: Specifications | |
| Electroacoustics \x96 Octave-band and fractional-octave-ba nd filters \x96 Part 2: Pattern-evaluation tests | |
| Electroacoustics \x96 Octave-band and fractional-octave-ba nd filters \x96 Part 3: Periodic tests | |
| Electrostatics - Part 2-1: Measurement Methods - Ability of Materials and Products to Dissipate Static Electric Charge | |
| Electrostatics - Part 2-3: Methods of Test for Determining the Resistaance and Resistivity of Solid Planar Materials Used to Avoid Electrostatic Charge Accumulation | |
| Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation | |
| Electrostatics - Part 3-1: Methods for Simulation of Electrostatic Effects - Human Body Model (HBM) - Component Testing | |
| Electrostatics - Part 3-2: Methods for Simulation of Electrostatic Effects - Machine Model (MM) - Component Testing | |
| Electrostatics - Part 4-3: Standard Test Methods for Specific Applications - Footwear | |
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization (Commented Version) | |
| Electrostatics - Part 4: Standard Test Methods for Specific Applications - Section 1: Electrostatic Behaviour of Floor Coverings and Installed Floors | |
| Electrostatics - Part 5-2: Protection of Electronic Devices from Electrostatic Phenomena - User Guide | |
| ELECTROSTATICS \x96 Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation | |
| Electrostatics \x96 Part 4-10: Standard test methods for specific applications \x96 Two-point resistance measurement | |
| Electrostatics \x96 Part 4-11: Standard test methods for specific applications \x96 Testing of electrostatic properties of composite IBC | |
| Electrostatics \x96 Part 4-5: Standard test methods for specific applications \x96 Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person | |
| Electrostatics \x96 Part 4-6: Standard test methods for specific applications \x96 Wrist straps | |
| Electrostatics \x96 Part 4-7: Standard test methods for specific applications \x96 Ionization | |
| Electrostatics \x96 Part 4-8: Standard test methods for specific applications \x96 Discharge shielding \x96 Bags | |
| Electrostatics \x96 Part 4-9: Standard test methods for specific applications \x96 Garments \x96 Resistive characterization | |
| Electrostatics \x96 Part 4-9: Standard test methods for specific applications \x96 Garments | |
| Electrostatics \x96 Part 5-1: Protection of electronic devices from electrostatic phenomena \x96 General requirements (Commented Version) | |
| ELECTROSTATICS \x96 Part 5-1: Protection of electronic devices from electrostatic phenomena \x96 General requirements | |
| Electrostatics \x96 Part 5-3: Protection of electronic devices from electrostatic phenomena \x96 Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices (Commented Version) | |
| Electrostatics \x96 Part 5-3: Protection of electronic devices from electrostatic phenomena \x96 Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices | |
| Electrostatics \x96 Part 6-1: Electrostatic control for healthcare \x96 General requirements for facilities | |
| Electrostatics Part 4-4: Standard test methods for specific applications Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Electrostatics Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person | |
| Fiber Optic Interconnecting Devices and Passive Components - Basic Test Measurement Procedures - Part 2-39: Tests - Susceptibility to External Magnetic Fields | |
| Fibre optic adaptors - Part 1-1: Blank detail specification | |
| Fibre optic adaptors - Part 1: Generic specification | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 1-1: Test Procedures for General Communication Subsystems - Transmitter Output Optical Power Measurement for Single-Mode Optical Fibre Cable | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 1-3: Test Procedures for General Communication Subsystems - Central Wavelength and Spectral Width Measurement | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-1: Test Procedures for Digital Systems - Receiver Sensitivity and Overload Measurement | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-2: Test Procedures for Digital Systems - Optical Eye Pattern, Waveform, and Extinction Ratio | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-4: Test Procedures for Digital Systems - Bit-Rate Tolerance Measurement | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-5: Test Procedures for Digital Systems - Jitter Transfer Function Measurement | |
| Fibre Optic Communication Subsystem Basic Test Procedures - Part 4-2: Fibre Optic Cable Plant - Single-Mode Fibre Optic Cable Plant Attenuation | |
| Fibre Optic Communication Subsystem Test Procedures - Part 1-4: General Communication Subsystems - Collection and Reduction of Two-Dimensional Nearfield Data for Multimode Fibre Laser Transmitters | |
| Fibre optic communication subsystem test procedures - Part 2-13: Digital systems - Measurement of error vector magnitude | |
| Fibre optic communication subsystem test procedures \x96 Part 1-3: General communication subsystems \x96 Measurement of central wavelength, spectral width and additional spectral characteristics | |
| Fibre optic communication subsystem test procedures \x96 Part 1-4: General communication subsystems \x96 Light source encircled flux measurement method | |
| Fibre optic communication subsystem test procedures \x96 Part 2-11: Digital systems \x96 Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring | |
| Fibre optic communication subsystem test procedures \x96 Part 2-12: Digital systems \x96 Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment | |
| Fibre optic communication subsystem test procedures \x96 Part 2-2: Digital systems \x96 Optical eye pattern, waveform and extinction ratio measurement | |
| Fibre optic communication subsystem test procedures \x96 Part 2-3: Digital systems \x96 Jitter and wander measurements | |
| Fibre optic communication subsystem test procedures \x96 Part 2-8: Digital systems \x96 Determination of low BER using Q-factor measurements | |
| Fibre optic communication subsystem test procedures \x96 Part 4-3: Installed passive optical networks \x96 Attenuation and optical return loss measurements | |
| Fibre optic communication subsystem test procedures \x96 Part 4-4: Cable plants and links \x96 Polarization mode dispersion measurement for installed links | |
| Fibre optic communication subsystem test procedures Digital systems Part 2-8: Determination of low BER using Q-factor measurements | |
| Fibre optic communication subsystem test procedures Part 2-10: Digital systems Time-resolved chirp and alpha-factor measurement of laser transmitters | |
| Fibre optic communication subsystem test procedures Part 2-9: Digital systems Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems | |
| Fibre Optic Communication Subsystems - Part 1: Generic Specification | |
| Fibre Optic Fan-Outs - Part 1: Generic Specification | |
| Fibre optic fan-outs \x96 Part 1-1: Blank detail specification \x96 Environmental categories 1, 2, 3, 5 and 99 | |
| Fibre optic interconnect devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-48: Examinations and measurements \x96 Spring compression force of the coupling sleeve for rectangular ferrule... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-10: Tests - Crush Resistance First Edition | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-11: Tests - Axial Compression First Edition | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-13: Tests - Acceleration First Edition | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-14: Tests - Maximum Input Power | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-17: Tests - Cold First Edition | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-19: Tests - Damp Heat (Steady State) | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-1: Tests - Vibration (Sinusoidal) First Edition | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-20: Tests - Climatic Sequence | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature-humidity cyclic test | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-24: Tests - Screen Testing of Ceramic Alignment Split Sleeve by Stress Application | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests - Sealing endurance for closures | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-2: Tests - Mating Durability | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-30: Tests - Solar radiation | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-31: Tests - Nuclear Radiation | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-32: Tests - Water Vapour Permeation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of closures | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contamining fluids | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-35: Tests - Cable Notation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-36: Tests - Flammability (fire hazard) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for closures | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized closures of fibre optic devices | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-3: Tests - Static shear load | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-40: Tests - Screen Testing of Attenuation of Single-Mode Tuned Angled Optical Connectors | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-41: Tests - Screen Testing of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre Connectors | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-42: Tests - Static Side Load for Connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-5: Tests - Torsion/Twist | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-7: Tests - Bending Moment First Edition | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-8: Tests - Bump | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-12: Examinations and Measurements - Polarization Dependence of Attenuation of a Single-Mode Fibre Optic Component:... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-14: Examinations and Measurements - Accuracy and Repeatability of the Attenuation Settings of a Variable... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Measurements - Eccentricity of a convex polished ferrule endface | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-16: Examinations and Measurements - Endface Radius of Spherically Polished Ferrules | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-17: Examinations and Measurements - Endface Angle of Angle-Polished Ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-19: Examinations and Measurements - Polarization Dependence of Return Loss of a Single-Mode Fibre Optic... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-20: Examinations and Measurements - Directivity of Fibre Optic Branching Devices | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-21: Examinations and Measurements - Switching Time and Bounce Time | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-22: Examinations and Measurements - Ferrule Compression Force | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-23: Examination and Measurements - Fibre Position Relative to Ferrule Endface | |
| Fibre Optic Interconnecting Devices And Passive Components - Basic Test And Measurement Procedures - Part 3-24: Examinations And Measurements - Keying Accuracy Of Optical Connectors For Polarization Maintaining Fibre | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-25: Examinations and Measurements - Concentricity of the Ferrules and Ferrules with Fibre Installed | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-26: Examination and Measurements - Measurement of the Angular Misalignment between Fibre and Ferrules Axes... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-27: Examinations and Measurements - Measurement Method for the Hole Location of a Multiway Connector... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-28: Examinations and Measurements - Transient Loss | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-2: Examinations and Measurements - Polarization Dependence of a Single-Mode Fibre Optic Device First Edition... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-30: Examinations and Measurements - Polish Angle and Fibre Position on Single Ferrule Multifibre Connectors... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-33: Examinations and Measurements - Ferrule Withdrawal Force | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-34: Examinations and Measurements - Attenuation of Random Mated Connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-36: Examinations and Measurements - Measurement Methods for the Inside and Outside Diameters of Fibre... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-39: Examinations and Measurements - P C Optical Connector Reference Plug Selection | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-3: Examinations and Measurements - Monitoring Change in Attenuation and in Return Loss (Multiple Paths)... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-40: Examinations and Measurements - Extinction Ratio of a Polarization Maintaining (pm) Fibre Pigtailed Connector... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-4: Examination and Measurements - Attenuation | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-5: Examinations and Measurements - Wavelength Dependence of Attenuation | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-6: EXAMINATIONS ANDMEASUREMENTS - RETURN LOSS | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-7: Examinations and Measurements - Wavelength Dependence of Attenuation and Return Loss | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-8: Examinations and Measurements - Ambient Light Susceptibility | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-9: Examinations and Measurements - Far-End Crosstalk | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurment Procedures - Part 2-48: Tests - Temperature-Humidity Cycling | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Mesurement Procedures - Part 2-43: Tests - Screen Testing of Return Loss of Single Mode PC Optical Fibre Connectors... | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Mesurement Procedures - Part 2-45: Tests - Durability Test by Water Immersion | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-10: Tests \x96 Crush and load resistance | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-11: Tests \x96 Axial compression | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS \x96 BASIC TEST AND MEASUREMENT PROCEDURES \x96 Part 2-12: Tests \x96 Impact | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-14: Tests \x96 High optical power | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-18: Tests \x96 Dry heat | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-1: Tests - Vibration (sinusoidal) CORRIGENDUM 1 | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-1: Tests \x96 Vibration (sinusoidal) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-22: Tests \x96 Change of temperature (Commented Version) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-28: Tests \x96 Industrial atmosphere (sulphur dioxide) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-34: Tests \x96 Resistance to solvents and contaminating fluids (Commented Version) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-38: Tests \x96 Sealing for fibre optic sealed closures and hardened connectors using air pressure... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-43: Tests \x96 Screen testing of return loss of single-mode PC optical fibre connectors | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-46: Tests \x96 Damp heat, cyclic | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-47: Tests \x96 Thermal shocks Corrigendum 1 | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-47: Tests \x96 Thermal shocks | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-49: Tests \x96 Connector installation test | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-4: Tests \x96 Fibre or cable retention | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-50: Tests \x96 Fibre optic connector proof test with static load \x96 Singlemode and multimode... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-51: Tests \x96 Fibre optic connector test for transmission with applied tensile load \x96 Singlemode... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-52: Tests \x96 Bending test for cords | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-54: Tests \x96 Corrosive atmosphere (mixed gas) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-55: Tests \x96 Strength of mounted adaptor | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-56: Tests \x96 Wind resistance of mounted housing | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-6: Tests \x96 Tensile strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-21: Examinations and measurements \x96 Switching time IEC | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-30: Examinations and measurements \x96 Endface geometry of rectangular ferrule | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-32: Examinations and measurements \x96 Polarization mode dispersion measurement for passive optical components | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS \x96 BASIC TEST AND MEASUREMENT PROCEDURES \x96 Part 3-33: Examinations and measurements \x96 Withdrawal force from a resilient alignment sleeve using pin gauges... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-35: Examinations and measurements \x96 Fibre optic connector endface visual and automated inspection CORRIGENDUM 1... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-35: Examinations and measurements \x96 Fibre optic connector endface visual and automated inspection | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-38: Examinations and measurements \x96 Group delay, chromatic dispersion and phase ripple | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-42: Examinations and measurements \x96 Attenuation of single mode alignment sleeves and or adaptors with... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-43: Examinations and measurements \x96 Mode transfer function measurement for fibre optic sources | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-44: Examinations and measurements \x96 Fibre optic transceiver receptacle endface visual and automated inspection | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-45: Examinations and measurements \x96 Attenuation of random mated multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-46: Measurement \x96 Bore diameter for guide pin in MT ferrules | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-47: Examinations and measurements \x96 End face geometry of PC/APC spherically polished ferrules using interferometry... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-49: Examinations and measurements \x96 Guide pin retention force for rectangular ferrule multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-4: Examinations and measurements \x96 Attenuation | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS \x96 BASIC TEST AND MEASUREMENT PROCEDURES \x96 Part 3-50: Examinations and measurements \x96 Crosstalk for optical spatial switches | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-51: Examinations and measurements \x96 Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-52: Examinations and measurements \x96 Guide hole and alignment pin deformation constant, CD for 8... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS \x96 BASIC TEST AND MEASUREMENT PROCEDURES \x96 Part 3-53: Examinations and measurements \x96 Encircled angular flux (EAF) measurement method based on two-dimensional far... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-54: Examinations and measurements \x96 Angular misalignment between ferrule bore axis and ferrule axis for... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-55: Examinations and measurements \x96 Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive,... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures Part 3-53: Examinations and measurements \x96 Encircled angular flux (EAF) measurement method based on two-dimensional far field... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS \x96 BASIC TESTS AND MEASUREMENT PROCEDURES Part 2-19: Tests - Damp heat (steady state) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS \x96 BASIC TESTS AND MEASUREMENT PROCEDURES Part 3-4: Examinations and measurement \x96 Attenuation | |
| Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices | |
| Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-29: Examinations and measurements Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM... | |
| Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-31: Examinations and measurements Coupled power ratio measurement for fibre optic sources | |
| Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37: Examinations and measurements Endface angle of angle-polished optical fibres | |
| Fibre Optic Passive Components and Cable Assemblies - Part 1: Capability Approval - Generic Specification | |
| Fibre Optic Terminus Sets - Part 1-1: Blank Detail Specification (IECQ QC 780001) | |
| Fibre Optic Terminus Sets - Part 1: Generic Specification | |
| Fibre- optic communication subsystem test procedures \x96 Part 4-2: Installed cabling plant \x96 Single-mode attenuation and optical return loss measurements | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-1: Installed cabling plant \x96 Multimode attenuation measurement | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-5: Installed cabling plant \x96 Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces | |
| FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES \x96 Part 4-5: Part 4-5: Installed cabling plant \x96 Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces | |
| Fibre-optic communication subsystem test procedures Part 4-1: Cable plant and links Multimode fibre-optic cable plant attenuation measurement | |
| Filters Using Waveguide Type Dielectric Resonators - Part 1-2: Test Conditions | |
| Filters Using Waveguide Type Dielectric Resonators - Part 1: General Information, Standard Values and Test Conditions - Section 1: General Information and Standard Values | |
| Filters using waveguide type dielectric resonators Part 1: Generic specification | |
| Filters using waveguide type dielectric resonators Part 2: Guidance for use | |
| Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages 72,5 kV and Above - Requirements for Switching of Bus-Charging Currents by Disconnectors | |
| Guidance for Using the ADA Programming Language in Avionic Systems | |
| Helical-Scan Digital Composite Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape - Format D-3 | |
| High-Frequency Dielectric Heating Installations - Test Methods for the Determination of Power Output | |
| High-Voltage/Low-Vol tage Prefabricated Substations | |
| Household Electric Heating Pads - Methods for Measuring Performance | |
| Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 1: General | |
| Household High-Fidelity Audio Equipment and Systems - Methods of Measuring and Specifying the Performance - Part 2: FM Radio Tuners | |
| Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 3: Amplifiers | |
| Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 5: Loudspeakers | |
| Industrial Cable Reels | |
| Industrial Microwave Heating Installations - Test Methods for the Determination of Power Output | |
| Industrial Systems, Installations and Equipment and Industrial Products - Structuring Principles and Reference Designations - Part 2: Classification of Objects and Codes for Classes | |
| Industrial Systems, Installations and Equipment and Industrial Products - Structuring Principles and Reference Designations Part 1: Basic Rules | |
| INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYSER HOUSES | |
| Industrial-Process Control Systems - Classification of Adaptive Controllers for the Purpose of Evaluation | |
| Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic or Glass Insulator Units for D.C. Systems - Definitions, Test Methods and Acceptance Criteria | |
| Interconnections of Satellite Receiving Equipment - Part 1: Europe | |
| Interconnections of Satellite Receiving Equipment - Part 2: Japan | |
| Laminated products made of bamboo strips for indoor furniture purposes \x97 Requirements and test methods | |
| LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS | |
| Lamp Controlgear - Part 2-10: Particular Requirements for Electronic Invertors and Convertors for High-Frequency Operation of Cold Start Tubular Discharge Lamps (Neon Tubes) | |
| Lamp Controlgear - Part 2-11: Particular Requirements for Miscellaneous Electronic Circuits Used with Luminaries | |
| LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) | |
| LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS | |
| Lamp Controlgear - Part 2-3: Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps | |
| Lamp Controlgear - Part 2-4: Particular Requirements for D.C. Supplied Electronic Ballasts for General Lighting | |
| Lamp Controlgear - Part 2-5: Particular Requirements for D.C. Supplied Electronic Ballasts for Public Transport Lighting | |
| Lamp Controlgear - Part 2-6: Particular Requirements for D.C. Supplied Electronic Ballasts for Aircraft Lighting | |
| Lamp Controlgear - Part 2-7: Particular Requirements for D.C. Supplied Electronic Ballasts for Emergency Lighting | |
| Lamp controlgear \x96 Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules | |
| Lamp controlgear \x96 Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps | |
| Lamp controlgear \x96 Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps Amendment 2 | |
| Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) | |
| Live Working - Guidelines for Quality Assurance Plans | |
| Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements | |
| Marking on U and E Ferrite Cores | |
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base... | |
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks | |
| Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/invar/copper | |
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks | |
| Materials for Interconnection Structures - Part 8: Sectional Specification Set for Non-Conductive Films and Coatings - Section 8: Temporary Polymer Coatings | |
| Materials for Marine Propulsion Gearing (Metric Edition) | |
| Materials for Marine Propulsion Gearing | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 2-12: Sectional Specification Set for Reinforced Base Materials, Clad and Unclad - Epoxide Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 2-13: Sectional Specification Set for Reinforced Base Materials, Clad and Unclad - Cyanate Ester Non-Woven Aramid Laminate of Defined Flammability,... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 2-18: Reinforced Base Materials, Clad and Unclad - Polyester Non-Woven Fibreglass Reinforced Laminated Sheet of Defined Flammability (Vertical Burning Test),... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 2-19: Reinforced Base Materials, Clad and Unclad - Exoxide Cross-Plied Linear Fibreglass-Reinforce d Laminated Sheets of Defined Flammability (Vertical Burning... | |
| Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced Base Materials, Clad and Unclad - Non-halogenated Epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 2-4: Reinforced Base Materials, Clad and Unclad - Polyester Non-Woven/Woven Fibreglass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad... | |
| Materials for printed boards and other interconnecting structures - Part 2-52: Reinforced base materials clad and unclad - Thermosetting hydrocarbon resin system, woven E-glass reinforced laminate sheets of defined flammability... | |
| Materials for printed boards and other interconnecting structures - Part 2-53: Reinforced base materials clad and unclad - PTFE unfilled laminate sheets of defined flammability (vertical burning test), copper-clad | |
| Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad Brominated epoxied cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets... | |
| Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad Brominated epoxied nonwoven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test),... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 2-7: Reinforced Base Materials Clad and Unclad - Epoxide Woven E-Glass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 3-3: Sectional Specification Set for Unreinforced Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive Coated Flexible... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 3-4: Sectional Specification Set for Unreinforced Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive Coated Flexible... | |
| Materials for Printed Boards and Other Interconnecting Structures - Part 3-5: Sectional Specification Set for Unreinforced Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Transfer Adhesive Films... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-27: Reinforced base materials clad and unclad \x96 Bismaleimide/triazin e modified with non-halogenated epoxide woven glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-30: Reinforced base materials clad and unclad \x96 Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-31: Reinforced base materials, clad and unclad \x96 Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-32: Reinforced base materials, clad and unclad \x96 Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-33: Reinforced base materials, clad and unclad \x96 Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-34: Reinforced base materials, clad and unclad \x96 Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-35: Reinforced base materials, clad and unclad \x96 Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test),... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-36: Reinforced base materials, clad and unclad \x96 Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-37: Reinforced base materials, clad and unclad \x96 Modified nonhalogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-38: Reinforced base materials, clad and unclad \x96 Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test),... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-39: Reinforced base materials clad and unclad \x96 High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-40: Reinforced base materials, clad and unclad \x96 High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-41: Reinforced base materials clad and unclad \x96 Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-42: Reinforced base materials clad and unclad \x96 Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-43: Reinforced base materials clad and unclad \x96 Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-44: Reinforced base materials clad and unclad \x96 Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-45: Reinforced base materials clad and unclad \x96 Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m\x95K)... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-46: Reinforced base materials clad and unclad \x96 Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m\x95K)... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-47: Reinforced base materials clad and unclad \x96 Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m\x95K)... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-51: Reinforced base materials, clad and unclad \x96 Base materials for integrated circuit card carrier tape, unclad | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 Epoxide woven E-glass prepreg of... | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 Multifunctional epoxide woven E-glass prepreg... | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 Multifunctional non-halogenated epoxide woven E-glass... | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 Non-halogenated epoxide woven E-glass prepreg... | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 High performance epoxide woven E-glass... | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 High performance non-halogenated epoxide woven... | |
| Materials for printed boards and other interconnecting structures \x96 Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) \x96 Epoxide woven E-glass prepreg of... | |
| Materials for printed boards and other interconnecting structures \x96 Part 6-3: Sectional specification set for reinforcement materials \x96 Specification for finished fabric woven from "E" glass for printed boards | |
| Materials for printed boards and other interconnecting structures Part 2-10: Reinforced base materials clad and unclad Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined... | |
| Materials for printed boards and other interconnecting structures Part 2-11: Reinforced base materials clad and unclad - polyimide, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined... | |
| Materials for printed boards and other interconnecting structures Part 2-1: Reinforced base materials, clad and unclad Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad | |
| Materials for printed boards and other interconnecting structures Part 2-22: Reinforced base materials clad and unclad Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad... | |
| Materials for printed boards and other interconnecting structures Part 2-23: Reinforced base materials, clad and unclad Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad | |
| Materials for printed boards and other interconnecting structures Part 2-26: Reinforced base materials clad and unclad Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad... | |
| Materials for printed boards and other interconnecting structures Part 2-2: Reinforced base materials, clad and unclad Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad | |
| Materials for printed boards and other interconnecting structures Part 2-8: Reinforced base materials clad and unclad Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test),... | |
| Materials for printed boards and other interconnecting structures Part 2-9: Reinforced base materials clad and unclad Bismaleimide/triazin e modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability... | |
| Materials for printed boards and other interconnecting structures Part 4-11: Sectional specification set for prepreg materials, unclad Non-halogenated epoxide, woven E-glass prepreg of defined flammability | |
| Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials, unclad Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability | |
| Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials, unclad Multifunctional epoxide woven E-glass prepreg of defined flammability | |
| Materials for printed boards and other interconnecting structures Part 4-5: Sectional specification set for prepreg materials, unclad Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability | |
| Medical Diagnostic X-Ray Equipment - Radiation Conditions for Use in the Determination of Characteristics | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index | |
| Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function | |
| Medical Electrical Equipment - Radionuclide Calibrators - Particular Methods for Describing Performance | |
| Medical electrical equipment \x96 Radionuclide calibrators \x96 Particular methods for describing performance | |
| Minerais de chrome - D\xe9termination de l\x92humidit\xe9 des \xe9chantillons pour analyse - M\xe9thode gravim\xe9trique | |
| Minerais de chrome - Dosage du fer total - M\xe9thode titrim\xe9trique apr\xe8s r\xe9duction | |
| Minerais de chrome - Dosage du phosphore - M\xe9thode photom\xe9trique au molybdophosphate r\xe9duit | |
| Nuclear Instrumentation - Bore-Hole Apparatus for X-Ray Fluorescence Analysis | |
| Nuclear Instrumentation - Digital Bus for NIM Instruments | |
| Nuclear Instrumentation - Liquid-Scintillation Counting Systems - Performance Verification | |
| Nuclear Instrumentation - Microprocessor Based Nuclear Radiation Measuring Devices | |
| Nuclear Instrumentation - Multichannel Pulse Height Analyzers - Main Characteristics, Technical Requirements and Test Methods | |
| Nuclear instrumentation Thickness measurement systems utilizing ionizing radiation Definitions and test methods | |
| Nuclear Reactor Instrumentation - Boiling Light Water Reactors (BWR) - Measurements in the Reactor Vessel for Monitoring Adequate Cooling within the Core | |
| Nuclear Reactors - Instrumentation and Control Systems Important for Safety - Detection of Leakage in Coolant Systems | |
| Optical amplifier test methods Part 11-1: Polarization mode dispersion Jones matrix eigenanalysis method (JME) | |
| Optical Amplifiers - Part 3-2: Test Methods for Noise Figure Parameters - Electrical Spectrum Analyzer Method | |
| Optical Amplifiers - Part 5-2: Qualification Specifications - Reliability Qualification for Optical Fibre Amplifiers | |
| Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer | |
| Optical Amplifiers - Test Methods - Part 10-2: Multichannel Parameters - Pulse Method Using a Gated Optical Spectrum Analyzer | |
| Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control | |
| Optical amplifiers \x96 Part 2: Single channel applications \x96 Performance specification template | |
| OPTICAL AMPLIFIERS \x96 Part 5-2: Qualification specifications \x96 Reliability qualification for optical fibre amplifiers | |
| Optical amplifiers \x96 Part 6-1: Interfaces \x96 Command set | |
| Optical amplifiers \x96 Test methods \x96 Part 1-1: Power and gain parameters \x96 Optical spectrum analyzer method | |
| Optical amplifiers \x96 Test methods \x96 Part 1-3: Power and gain parameters \x96 Optical power meter method | |
| Optical amplifiers \x96 Test methods \x96 Part 10-4: Multichannel parameters \x96 Interpolated source subtraction method using an optical spectrum analyzer | |
| Optical amplifiers \x96 Test methods \x96 Part 10-5: Multichannel parameters \x96 Distributed Raman amplifier gain and noise figure | |
| Optical amplifiers \x96 Test methods \x96 Part 1: Power and gain parameters | |
| Optical amplifiers \x96 Test methods \x96 Part 3-3: Noise figure parameters \x96 Signal power to total ASE power ratio | |
| Optical amplifiers \x96 Test methods \x96 Part 4-1: Gain transient parameters \x96 Two-wavelength method | |
| Optical amplifiers \x96 Test methods \x96 Part 4-2: Gain transient parameters \x96 Broadband source method | |
| Optical amplifiers \x96 Test methods \x96 Part 4-4: Gain transient parameters \x96 Single channel optical amplifiers with gain control | |
| Optical amplifiers Part 4: Multichannel applications Performance specification template | |
| Optical amplifiers Test methods Part 10-3: Multichannel parameters Probe methods | |
| Optical amplifiers Test methods Part 11-2: Polarization mode dispersion parameter Poincar\xe9 sphere analysis method | |
| Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method | |
| Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method | |
| Optical Fibre Amplifiers - Basic Specification - Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer | |
| Optical Fibre Amplifiers - Basic Specification - Part 1-2: Test Methods for Gain Parameters - Electrical Spectrum Analyzer | |
| Optical Fibre Amplifiers - Basic Specification - Part 1-3: Test Methods for Gain Parameters - Optical Power Meter | |
| Optical Fibre Amplifiers - Basic Specification - Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer | |
| Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer | |
| Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter | |
| Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test Methods for Reflectance Parameters - Optical Spectrum Analyser | |
| Optical Fibre Amplifiers - Basic Specification - Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser | |
| Optical Fibre Amplifiers - Basic Specification - Part 6-1: Test Methods for Pump Leakage Parameters - Optical Demultiplexer | |
| Optical Fibre Amplifiers - Basic Specification - Part 7-1: Test Methods for Out-of-Band Insertion Losses - Filtered Optical Power Meter | |
| Optical Fibre Amplifiers - Part 1: Generic Specification | |
| Optical Fibre Amplifiers - Part 2: Digital Applications - Performance Specification Template | |
| Optical Fibre Amplifiers Basic Specification Part 3: Test Methods for Noise Figure Parameters | |
| Overhead Lines - Requirements and Tests for Fitting | |
| Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval | |
| Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval -... | |
| Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval | |
| Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval | |
| Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval - Section 1: Blank detail specification... | |
| Piezoelectric ceramic resonators - A Specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval | |
| Power Converters Installed on Board Rolling Stock Part 1: Characteristics and Test Methods | |
| Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations | |
| Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions | |
| Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance - Part 3: Tests for the Effects of Influence Quantities | |
| Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content | |
| Protection against lightning electromagnetic impulse - Part 1: General principles | |
| Protective Devices Against Diagnostic Medical X-Radiation - Part 3: Protective Clothing and Protective Devices for Gonads | |
| Protective Devices Against Diagnostic Medical X-Radiation Part 1: Determination of Attenuation Properties of Materials | |
| Protective Devices Against Diagnostic Medical X-Radiation Part 2: Protective Glass Plates | |
| Radiation Protection Instrumentation - Direct Reading Personal Dose Equivalent (Rate) Monitors - X, Gamma and High Energy Beta Radiation | |
| Radiation Protection Instrumentation - Equipment for Continuously Monitoring Beta and Gamma Emitting Radionuclides in Liquid Effluents or in Surface Waters | |
| Radiation Protection Instrumentation - Installed Dose Equivalent Rate Meters, Warning Assemblies and Monitors for Neutron Radiation of Energy from Thermal to 15 MeV | |
| Radiation Protection Instrumentation - Measurement of Discrete Radionuclides in the Environment - In Situ Photon Spectrometry System Using a Germanium Detector | |
| Radiation Protection Instrumentation - Monitoring Equipment - Personal Warning Devices for X and Gamma Radiations | |
| Radiation Protection Instrumentation - Neutron Radiation - Direct Reading Personal Dose Equivalent and/or Dose Equivalent Rate Monitors | |
| Radiation Protection Instrumentation - Portable Potential Alpha Energy Meter for Rapid Measurements in Mines | |
| Radiation protection instrumentation Installed monitors for the detection of radioactive contamination of laundry | |
| SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, AUDITORY AND TACTILE SIGNALS | |
| Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking | |
| Safety of Machinery - Indication, Marking and Actuation - Part 3: Requirements for the Location and Operation of Actuators | |
| Soft Ferrite Material Classification | |
| Sound System Equipment - Methods of Measuring and Specifying the Performance of Sounders (Electroacoustic Transducers for Tone Production) | |
| Spherical Plain Bearing Rod Ends - Dimension Series E and JK - Boundary Dimensions and Tolerances | |
| Spherical Plain Radial Bearings; Joint Type - Tolerances | |
| Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth (Metric Edition) | |
| Terrestrial Photovoltaic (PV) Power Generating Systems - General and Guide | |
| Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 5: Sectional Specification for Pulse Transformers on the Basis of the Capability Approval Procedure | |
| Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 6: Sectional Specification for Inductors on the Basis of the Capability Approval Procedure | |
| Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 7: Sectional Specification for High-Frequency Inductors and Intermediate Frequency Transformers on the Basis of the Capability Approval Procedure... | |
| Tuyaux et flexibles en caoutchouc pour vapeur satur\xe9e - Sp\xe9cification | |
| Ultrasonics - Hand-Held Probe Doppler Foetal Heartbeat Detectors - Performance Requirements and Methods of Measurement and Reporting | |
| UV Test for Photovoltaic (PV) Modules | |
| Waveguide Type Dielecctric Resonators - Part 1-3: General Information and Test Conditions - Measurement Method of Complex Relative Permittivity for Dielectric Resonator Materials at Microwave Frequency | |
| Waveguide Type Dielectric Resonators - Part 1-2: General Information and Test Conditions - Test Conditions | |
| Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency | |
| Waveguide Type Dielectric Resonators - Part 1: General Information and Test Conditions - Section 1: General Information | |
| Waveguide type dielectric resonators Part 1-4: General information and test conditions Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency | |
| Waveguide type dielectric resonators Part 1: Generic specification | |
| Waveguide type dielectric resonators Part 2: Guidelines for oscillator and filter applications | |
| Waveguide type dielectric resonators Part 4-1: Blank detail specification | |
| Waveguide type dielectric resonators Part 4: Sectional specification |
| << Prev | Next >> |