Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
60
68
69
70
71
72
73
74
75
76
77
78
79
80
90
100
110
120
130
140
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| Agents de surface - Alcanesulfonates techniques - D\xe9termination de la teneur en alcanemonosulfonates par titrage direct dans deux phases | |
| Agents de surface - Alcanesulfonates techniques - D\xe9termination de la teneur en alcanesulfonates totaux | |
| Aluminium-Clad Steel Wires for Electrical Purposes | |
| AMENDMENT 1 Attachment materials for electronic assembly \x96 Part 1-3: Requirements for electronic grade solder alloys and fluxed and nonfluxed solid solders for electronic soldering applications | |
| Amendment 1 Bayonet lampholders | |
| AMENDMENT 1 Double-capped fluorescent lamps \x96 Safety specifications | |
| Amendment 1 Formal design review | |
| AMENDMENT 1 International lamp coding system (ILCOS) | |
| AMENDMENT 1 Live working \x96 Voltage detectors \x96 Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. | |
| Amendment 1 Low-voltage power supply devices, d.c. output \x96 Performance characteristics | |
| AMENDMENT 1 Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 3: Serial data instrument network | |
| Amendment 1 Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 450: Multiple talkers and multiple listeners \x96 Ethernet interconnection | |
| AMENDMENT 1 Maritime navigation and radiocommunication equipmentand systems \x96 Digital interfaces \x96 Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security | |
| AMENDMENT 1 Metal halide lamps \x96 Performance specification | |
| AMENDMENT 1 Mineral oil-filled electrical equipment \x96 Application of dissolved gas analysis (DGA) to factory tests on electrical equipment | |
| AMENDMENT 1 Single-capped fluorescent lamps \x96 Safety specifications | |
| AMENDMENT 1 Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| AMENDMENT 1 Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| AMENDMENT 1 Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules | |
| AMENDMENT 2 - Electrical accessories \x96 Cable reels for household and similar purposes | |
| Amendment 2 Bayonet lampholders | |
| AMENDMENT 2 Double-capped fluorescent lamps \x96 Safety specifications | |
| AMENDMENT 2 Single-capped fluorescent lamps \x96 Safety specifications | |
| Analogue Audio Recording on Video Tape - Polarity of Magnetization | |
| Application of Markov Techniques | |
| Attachmant Materials for Electronic Assembly - Part 1-1: Requirements for Soldering Fluxes for High-Quality Interconnections in Electronics Assembly | |
| Attachmant Materials for Electronic Assembly - Part 1-2: Requirements for Solder Pastes for High-Quality Interconnections in Electronics Assembly | |
| Attachmant Materials for Electronic Assembly - Part 1-3: Requirements for Electronic Grade Solders Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications | |
| Bayonet lampholders | |
| Broadcast Video Tape Recorders - Methods of Measurement - Part 1: Mechanical Measurements | |
| Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements for analogue composite video signals | |
| Broadcast Video Tape Recorders - Methods of Measurement - Part 4: Analogue Audio Performance Measurements | |
| Characteristic Parameters of Stand-Alone Photovoltaic (PV) Systems | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 6-1: Land pattern design \x96 Generic requirements for land pattern on circuit boards | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 6-2: Land pattern design \x96 Description of land pattern for the most common surface mounted components (SMD) | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 6-3: Land pattern design \x96 Description of land pattern for through hole components (THT) | |
| Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric | |
| Coaxial communication cables - Part 1-128: Electrical test methods - Polarization directivity of radiating cable | |
| Coaxial communication cables \x96 Part 1-100: Electrical test methods \x96 General requirements | |
| Coaxial communication cables \x96 Part 1-105: Electrical test methods \x96 Test for withstand voltage of cable dielectric | |
| Coaxial communication cables \x96 Part 1-106: Electrical test methods \x96 Test for withstand voltage of cable sheath | |
| Coaxial communication cables \x96 Part 1-110: Electrical test methods \x96 Test for continuity | |
| Coaxial communication cables \x96 Part 1-111: Electrical test methods \x96 Stability of phase test methods | |
| Coaxial communication cables \x96 Part 1-112: Electrical test methods \x96 Test for return loss (uniformity of impedance) | |
| Coaxial communication cables \x96 Part 1-113: Electrical test methods \x96 Test for attenuation constant | |
| Coaxial communication cables \x96 Part 1-114: Electrical test methods \x96 Test for inductance | |
| Coaxial communication cables \x96 Part 1-115: Electrical test methods \x96 Test for regularity of impedance (pulse/step function return loss) | |
| Coaxial communication cables \x96 Part 1-116: Electrical test methods \x96 Test for impedance with time domain reflectometry (TDR) | |
| Coaxial communication cables \x96 Part 1-119: Electrical test methods \x96 RF average power rating | |
| Coaxial communication cables \x96 Part 1-119: Electrical test methods \x96 RF power rating | |
| Coaxial communication cables \x96 Part 1-122: Electrical test methods \x96 Test for cross-talk between coaxial cables | |
| Coaxial communication cables \x96 Part 1-123: Electrical test methods \x96 Test for attenuation constant of radiating cable | |
| Coaxial communication cables \x96 Part 1-124: Electrical test methods \x96 Test for coupling loss of radiating cable | |
| Coaxial communication cables \x96 Part 1-125: Electrical test methods \x96 Test for equivalent relative permittivity and equivalent dissipation factor of dielectric | |
| Coaxial communication cables \x96 Part 1-126: Electrical test methods \x96 Corona extinction voltage | |
| Coaxial communication cables \x96 Part 1-127: Electrical test methods \x96 Link loss of radiating cable | |
| Coaxial communication cables \x96 Part 1-200: Environmental test methods \x96 General requirements | |
| Coaxial communication cables \x96 Part 1-201: Environmental test methods \x96 Test for cold bend performance of cable | |
| Coaxial communication cables \x96 Part 1-203: Environmental test methods \x96 Test for water penetration of cable | |
| Coaxial communication cables \x96 Part 1-205: Environmental test methods \x96 Resistance to solvents and contaminating fluids | |
| Coaxial communication cables \x96 Part 1-208: Environmental test methods \x96 Longitudinal pneumatic resistance | |
| Coaxial communication cables \x96 Part 1-209: Environmental test methods \x96 Thermal cycling | |
| Coaxial communication cables \x96 Part 1-212: Environmental test methods \x96 UV stability | |
| Coaxial communication cables \x96 Part 1-215: Environmental test methods \x96 High temperature cable ageing | |
| Coaxial communication cables \x96 Part 1-303: Mechanical test methods \x96 Test for silver and tin plating thickness | |
| Coaxial communication cables \x96 Part 1-304: Mechanical test methods \x96 Impact resistance | |
| Coaxial communication cables \x96 Part 1-305: Mechanical test methods \x96 Solderability and resistance to soldering | |
| Coaxial communication cables \x96 Part 1-313: Mechanical test methods \x96 Adhesion of dielectric and sheath | |
| Coaxial communication cables \x96 Part 1-314: Mechanical test methods \x96 Test for bending | |
| Coaxial communication cables \x96 Part 1-317: Mechanical test methods \x96 Test for crush resistance of cable | |
| Coaxial communication cables \x96 Part 1-318: Mechanical test methods \x96 Heat performance tests | |
| Coaxial communication cables \x96 Part 1-324: Mechanical test methods \x96 Test for abrasion resistance of cable | |
| Coaxial communication cables \x96 Part 1-325: Mechanical test methods \x96 Aeolian vibration | |
| Coaxial communication cables \x96 Part 1-326: Mechanical test methods \x96 Hanger test | |
| Coaxial communication cables \x96 Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethyl ene (PTFE) dielectric | |
| Coaxial communication cables \x96 Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethyl ene (PTFE) dielectric | |
| Coaxial communication cables \x96 Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric | |
| Coaxial communication cables \x96 Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric | |
| Coaxial communication cables \x96 Part 12: Specification for spacer clamps for radiating cables | |
| Coaxial communication cables \x96 Part 13-1: Blank detail specification for semi-rigid cables with silicon dioxide dielectric | |
| Coaxial communication cables \x96 Part 13: Sectional specification for semi-rigid cables with silicon dioxide dielectric | |
| Coaxial communication cables \x96 Part 4-1: Blank detail specification for radiating cables | |
| Coaxial communication cables \x96 Part 4: Sectional specification for radiating cables (Commented Version) | |
| Coaxial communication cables \x96 Part 5-1: Blank detail specification for CATV trunk and distribution cables | |
| Coaxial communication cables \x96 Part 5: Sectional specification for CATV trunk and distribution cables (Commented Version) | |
| Coaxial communication cables \x96 Part 5: Sectional specification for CATV trunk and distribution cables | |
| Coaxial communication cables \x96 Part 6-1: Blank detail specification for CATV drop cables | |
| Coaxial communication cables \x96 Part 6-2: Detail specification for 75-4 type CATV drop cables | |
| Coaxial communication cables \x96 Part 6-3: Detail specification for 75-5 type CATV drop cables | |
| Coaxial communication cables \x96 Part 6-4: Detail specification for 75-7 type CATV drop cables | |
| Coaxial communication cables \x96 Part 6-5: Detail specification for Type A quad-shield CATV drop cables with screening class A++ | |
| Coaxial communication cables \x96 Part 6: Sectional specification for CATV drop cables | |
| Coaxial communication cables \x96 Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 11801-4 \x96 Indoor drop cables for systems operating at 5 MHz \x96 6... | |
| Coaxial communication cables \x96 Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 \x96 Indoor drop cables for systems operating at 5 MHz \x96 3... | |
| Coaxial communication cables \x96 Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethyl ene (PTFE) dielectric | |
| Coaxial communication cables \x96 Part 8-2: Detail specification for 50-047 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-3: Detail specification for 50-086 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-4: Detail specification for 50-141 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-5: Detail specification for 50-250 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-7: Detail specification for 75-086 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-8: Detail specification for 75-141 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8-9: Detail specification for 75-250 type semi-flexible cables with solid polytetrafluoroethyl ene (PTFE) insulation | |
| Coaxial communication cables \x96 Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethyl ene (PTFE) dielectric | |
| Coaxial communication cables \x96 Part 9-1: Flexible RF coaxial cables \x96 Blank detail specification | |
| Coaxial communication cables \x96 Part 9-2: Detail specification for 50-0,4 type RF flexible cables | |
| Coaxial communication cables \x96 Part 9: Sectional specification for RF flexible cables | |
| Coaxial communication cables Part 1-100: Electrical test methods General requirements | |
| Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d.c. resistance of cable | |
| Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable | |
| Coaxial communication cables Part 1-104: Electrical test methods Test for capacitance stability of cable | |
| Coaxial communication cables Part 1-105: Electrical test methods Test for withstand voltage of cable dielectric | |
| Coaxial communication cables Part 1-107: Electrical test methods Test for cable microphony charge level (mechanically induced noise) | |
| Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity | |
| Coaxial communication cables Part 1-111: Electrical test methods Test for stability of phase constant | |
| Coaxial communication cables Part 1-200: Environmental test methods General requirements | |
| Coaxial communication cables Part 1-206: Environmental test methods Climatic sequence | |
| Coaxial communication cables Part 1-301: Mechanical test methods Test for ovality | |
| Coaxial communication cables Part 1-302: Mechanical test methods Test for eccentricity | |
| Coaxial communication cables Part 1-308: Mechanical test methods Test for tensile strength and elongation for copper-clad metals | |
| Coaxial communication cables Part 1-310: Mechanical test methods Test for torsion characteristics of copper-clad metals | |
| Coaxial communication cables Part 1-316: Mechanical test methods Test of maximum pulling force of cable | |
| Compression and mechanical connectors for power cables \x96 Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um... | |
| Compression and mechanical connectors for power cables \x96 Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um =... | |
| Compression and mechanical connectors for power cables \x96 Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um =... | |
| Compression and Mechanical Connectors for Power Cables with Copper or Aluminium Conductors Part 1: Test Methods and Requirements | |
| Connecting Devices - Flat Quick-Connect Terminations for Electrical Copper Conductors - Safety Requirements | |
| CORRIGENDUM 1 Bayonet Lampholders | |
| Cylindres rev\xeatus de caoutchouc ou de plastique - , Sp\xe9cifications - Partie 3 : Tol\xe9rances dimensionnelles | |
| Cylindres rev\xeatus de caoutchouc ou de plastique - Sp\xe9cifications - Partie 1 : Sp\xe9cifications de duret\xe9 | |
| Cylindres rev\xeatus de caoutchouc ou de plastique - Sp\xe9cifications - Partie 2 : Caract\xe9ristiques\ x92 de surface | |
| Design Manual for Enclosed Epicyclic Gear Drives | |
| Design Manual for Enclosed Epicyclic Metric Module Gear Drives | |
| Designations for Signals and Connections | |
| Detail Specification for Coaxial Cable for Digital Communication in Horizontal Floor Wiring for a 500 m Reach and up to 10 Mb/s | |
| Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method | |
| Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 5: Application Layer Service Definition CORRIGENDUM 1 | |
| Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 6: Application Layer Protocol Specification CORRIGENDUM 1 | |
| Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 6: Application Layer Protocol Specification | |
| Double-capped fluorescent lamps \x96 Safety specifications | |
| Electrical Accessories - Cable Reels for Household and Similar Purposes | |
| Electrical accessories \x96 Cable reels for household and similar purposes | |
| Electrical and Electronic Measuring Equipment - Documentation | |
| Electrical Apparatus for Use in the Presence of Combustible Dust - Part 1: Electrical Apparatus Protected by Enclosures - Section 2: Selection, Installation, and Maintenance | |
| Electrical Apparatus for Use in the Presence of Combustible Dust - Part 2: Test Methods - Section 1: Methods for Determining the Minimum Ignition Temperatures of Dust First Edition | |
| Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures | |
| Electrical Apparatus for Use in the Presence of Combustible Dust - Part 3: Classification of Areas Where Combustible Dusts Are or May Be Present | |
| ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST -PART 1-1: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACETEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS | |
| Electrical apparatus for use in the presence of combustible dust \x96 Part 0: General requirements CORRIGENDUM 1 | |
| Electrical apparatus for use in the presence of combustible dust \x96 Part 11:Protection by intrinsic safety \x93iD\x94 CORRIGENDUM 1 | |
| Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation | |
| Electrical apparatus for use in the presence of combustible dust Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) | |
| Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection "pD" | |
| Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations | |
| Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements | |
| Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety \x93iD\x94 | |
| Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations Protection by Encapsulation \x93mD\x94 | |
| Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures \x93tD\x94 | |
| Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations \x96 Protection by Pressurization \x93pD\x94 | |
| Electrical Insulating Materials - Methods of Test for the Hydrolytic Stability - Part 2: Moulded Thermosets | |
| Electroacoustics - Random-Incidence and Diffuse-Field Calibration of Sound Level Meters | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-10: Constancy Tests - X-Ray Equipment for Mammography | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-11: Constancy Tests - Equipment for General Direct Radiography | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-3: Constancy Tests - Darkroom Safelight Conditions First Edition; (AS/NZS 4184.2.3: 1994) | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-4: Constancy Tests - Hard Copy Cameras | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-5: Constancy Tests - Image Display Devices | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-6: Constancy Tests - X-Ray Equipment for Computed Tomography | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-7: Constancy Tests - Equipment for Intra-Oral Dental Radiography Excluding Dental Panoramic Equipment | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-9: Constancy Tests - Equipment for Indirect Radioscopy and Indirect Radiography | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 3-1: Acceptance Tests - Imaging Performance of X-Ray Equipment for Radiographic and Radioscopic Systems | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 3-4: Acceptance Tests - Imaging Performance of Dental X-Ray Equipment | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-5: Acceptance tests \x96 Imaging performance of computed tomography X-ray equipment CORRIGENDUM 1 | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-5: Acceptance tests \x96 Imaging performance of computed tomography X-ray equipment | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-6: Acceptance and constancy tests \x96 Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation... | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-7: Acceptance and constancy tests \x96 Imaging performance of X-ray equipment for dental cone beam computed tomography | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-8: Acceptance and constancy tests \x96 Imaging performance of X-ray equipment for radiography and radioscopy | |
| Evaluation and routine testing in medical imaging departments Part 3-2: Acceptance tests Imaging performance of mammographic X-ray equipment | |
| Evaluation and routine testing in medical imaging departments Part 3-3: Acceptance tests Imaging performance of X-ray equipment for digital subtraction angiography (DSA) | |
| Expression of Performance of Gas Analyzers - Part 1: General | |
| Expression of Performance of Gas Analyzers - Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical Sensors) | |
| Expression of Performance of Gas Analyzers - Part 6: Photometric Analyzers | |
| Expression of performance of gas analyzers \x96 Part 7: Tuneable semiconductor laser gas analyzers | |
| Ferrite cores (ETD-cores) intended for use in power supply applications \x96 Dimensions | |
| Fibre Optic Isolators - Part 1-1: Blank Detail Specification; (IECQ QC 830001) | |
| Fibre Optic Isolators - Part 1: Generic Specification; (IECQ QC 830000) | |
| Fibre Optics - Safety Guide | |
| Fluorescent ultraviolet lamps used for tanning \x96 Measurement and specification method | |
| Formal Design Review | |
| Gas Analyzers - Expression of Performance - Part 3: Paramagnetic Oxygen Analyzers | |
| Gas analyzers \x96 Expression of performance \x96 Part 3: Paramagnetic oxygen analyzers CORRIGENDUM 1 | |
| Gas analyzers \x96 Expression of performance \x96 Part 3: Paramagnetic oxygen analyzers CORRIGENDUM 2 | |
| Gas analyzers \x96 Expression of performance \x96 Part 3: Paramagnetic oxygen analyzers | |
| Hand-Held Electric Mains Voltage Operated Circular Saws - Methods for Measuring the Performance | |
| Hand-Held Mains Voltage Operated Spray Guns - Performance Requirements | |
| Helical-Scan Digital Composite Video Cassette Recording System Using 19 mm Magnetic Tape, Format D2 (NTSC, PAL, PAL-M) | |
| High-Voltage Alternating Current Circuit-Breakers - Guide for Maintenance | |
| High-Voltage Alternating Current Circuit-Breakers - Guide for Seismic Qualification of High-Voltage Alternating Current Circuit-Breakers | |
| High-Voltage Alternating Current Circuit-Breakers - Inductive Load Switching | |
| High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment | |
| High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment | |
| High-Voltage Test Techniques for Low-Voltage Equipment Part 1: Definitions, Test and Procedure Requirements | |
| Impregnated Insulating Materials - Application of Dissolved Gas Analysis (DGA) to Factory Tests on Electrical Equipment | |
| Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements | |
| Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-24: Application layer service definition \x96 Type-24 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-25: Application layer service definition \x96 Type 25 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-26: Application layer service definition \x96 Type 26 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-27: Application layer service definition \x96 Type 27 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-3: Application layer service definition \x96 Type 3 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-4: Application layer service definition \x96 Type 4 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-7: Application layer service definition \x96 Type 7 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-8: Application layer service definition \x96 Type 8 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-10: Application layer protocol specification \x96 Type 10 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-11: Application layer protocol specification \x96 Type 11 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-12: Application layer protocol specification \x96 Type 12 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-13: Application layer protocol specification \x96 Type 13 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-14: Application layer protocol specification \x96 Type 14 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-15: Application layer protocol specification \x96 Type 15 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-16: Application layer protocol specification \x96 Type 16 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-17: Application layer protocol specification \x96 Type 17 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-18: Application layer protocol specification \x96 Type 18 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-19: Application layer protocol specification \x96 Type 19 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-20: Application layer protocol specification \x96 Type 20 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-21: Application layer protocol specification \x96 Type 21 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-22: Application layer protocol specification \x96 Type 22 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-23: Application layer protocol specification \x96 Type 23 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-24: Application layer protocol specification \x96 Type-24 Elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-25: Application layer protocol specification \x96 Type 25 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-26: Application layer protocol specification \x96 Type 26 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-27: Application layer protocol specification \x96 Type 27 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-28: Application layer protocol specification \x96 Type 28 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-2: Application layer protocol specification \x96 Type 2 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-3: Application layer protocol specification \x96 Type 3 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-4: Application layer protocol specification \x96 Type 4 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-5: Application layer protocol specification \x96 Type 5 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-7: Application layer protocol specification \x96 Type 7 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-8: Application layer protocol specification \x96 Type 8 elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-9: Application layer protocol specification \x96 Type 9 elements | |
| Industrial communication networks \x96Fieldbus specifications \x96 Part 5-28: Application layer service definition \x96 Type 28 elements | |
| Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 1: General Requirements | |
| Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 2: Methods of Test | |
| Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Round Laminated Rolled Tubes | |
| Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Round Laminated Moulded Tubes | |
| Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Round Laminated Moulded Rods | |
| Industrial systems, installations and equipment and industrial products \x96 Designation of signals \x96 Part 1: Basic rules | |
| Insulating Liquids - Linear Flame Propagation - Test Method Using a Glass-Fibre Tape | |
| Insulating materials \x96 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes \x96 Part 1: Definitions, designations and general requirements | |
| Insulators of Ceramic Material or Glass for Overhead Lines with a Nominal Voltage Greater Than 1 000 V - Puncture Testing | |
| International Lamp Coding System (ILCOS) | |
| Live Working - Earthing or Earthing and Short-Circuiting Equipment Using Lances as a Short-Circuiting Device - Lance Earthing | |
| Live Working - Insulating Hollow Tubes for Electrical Purposes | |
| LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING | |
| LIVE WORKING - SADDLES, STICK CLAMPS AND THEIR ACCESSORIES | |
| Live Working - Voltage Detectors - Part 1: Capacitive Type to Be Used for Voltages Exceeding 1 kV a.c. CORRIGENDUM | |
| Live Working - Voltage Detectors - Part 1: Capacitive Type to Be Used for Voltages Exceeding 1 kV A.C. | |
| Live Working - Voltage Detectors - Part 2: Resistive Type to Be Used for Voltages of 1 kV to 36 kV a.c. | |
| Live Working - Voltage Detectors - Part 2: Resistive Type to Be Used for Voltages of 1 kV to 36 kV | |
| LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE | |
| Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) | |
| Live working \x96 Voltage detectors \x96 Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. CORRIGENDUM 1 | |
| Live working \x96 Voltage detectors \x96 Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. | |
| Live working \x96 Voltage detectors \x96 Part 3: Two-pole low-voltage type | |
| Low-Voltage Power Supplies, D.C. Output - Part 3: Electromagnetic Compatibility (EMC) | |
| Low-Voltage Power Supplies, D.C. Output - Part 6: Requirements for Low-Voltage Power Supplies of Assessed Performance | |
| Low-voltage power supplies, d.c. output \x96 Part 7: Safety requirements | |
| Low-Voltage Power Supply Devices, D.C. Output - Performance Characteristics and Safety Requirements | |
| Low-voltage switch mode power supplies - Part 7: Safety requirements (Extended Version) | |
| Low-voltage switch mode power supplies \x96 Part 3: Electromagnetic compatibility (EMC) | |
| Magnetic Oxide Cores (E-Cores) of Rectangular Cross-Section and Associated Parts - Dimensions | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 1: Single Talker and Multiple Listeners | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 2: Single Talker and Multiple Listeners, High-Speed Transmission | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Electronic Chart Display and Information System (ECDIS) - Operational and Performance Requirements, Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Integrated Bridge Systems (IBS) - Operational and Performance Requirements, Methods of Testing and Required Test Results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 1: Single talker and multiple listeners (Commented Version) | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 1: Single talker and multiple listeners | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 2: Single talker and multiple listeners, high-speed transmission (Commented Version) | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 3: Serial data instrument network | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 450: Multiple talkers and multiple listeners \x96 Ethernet interconnection (Commented Version) | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 450: Multiple talkers and multiple listeners \x96 Ethernet interconnection | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security (Commented Version) | |
| MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS \x96 DIGITAL INTERFACES \x96 Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security | |
| Maritime navigation and radiocommunication equipment and systems \x96 Electronic chart display and information system (ECDIS) \x96 Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 402: Multiple talkers and multiple listeners Ship systems interconnection Documentation and test requirements | |
| Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 400: Multiple talkers and multiple listeners. Ship systems interconnection. Introduction and general principles | |
| Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 401: Multiple talkers and multiple listeners. Ship systems interconnection. Application Profile | |
| Maritime Navigation and Radiocommunication Equipment and Systems. Digital Interfaces. Part 410: Multiple Talkers and Multiple Listeners. Ship Systems Interconnection. Transport Profile Requirements and Basic Transport Profile | |
| Maritime Navigation and Radiocommunication Equipment and Systems. Digital Interfaces. Part 420: Multiple Talkers and Multiple Listeners. Ship Systems Interconnection. Companion Standard Requirements and Basic Companion Standards | |
| Maritime navigation and radiocommunication equipmentand systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security | |
| METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION | |
| Metal halide lamps \x96 Performance specification | |
| Method of test for petroleum and its products \x97 BS 2000-61: Determination of sulfur \x97 High pressure combustion method | |
| Method of test for the hydrolitic stability of electrical insulating materials - Part 1: Plastic films | |
| Methods of Measurement for Broadcast Video Tape Recorders Part 3: Electrical Measurements for Analogue Component Video Signals | |
| Mineral Insulating Oils - Methods for the Determination of 2-Furfural and Related Compounds | |
| NEUTRON AND GAMMA-RAY CROSS SECTIONS FOR NUCLEAR RADIATION PROTECTION CALCULATIONS FOR NUCLEAR POWER PLANTS | |
| Nuclear Instrumentation - Portable Gamma Radiation Meters and Spectrometers Used for Prospecting - Definitions, Requirements and Calibration | |
| Nuclear Power Plants - Control Rooms - Operator Controls | |
| Nuclear Power Plants - Instrumentation and Control Systems Important for Safety - Classification | |
| Nuclear Power Plants - Instrumentation and Control Systems Important for Safety - Requirements for Electrical Supplies | |
| Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems | |
| Nuclear Reactors - Response Time in Resistance Temperature Detectors (RTD) - In Situ Measurements | |
| Overvoltage Protection for Photovoltaic (PV) Power Generating Systems - Guide | |
| Performance Rating Of Central System Humidifiers for Residential Applications | |
| Petroleum Products and Lubricants - Triaryl Phosphate Ester Turbine Control Fluids (Category ISO-L-TCD) - Specifications | |
| Plant Environmental Air Quality | |
| PM-Cores Made of Magnetic Oxides and Associated Parts - Dimensions | |
| Power Rating of Single and Double Helical Gearing for Rolling Mill Service (Metric Edition) | |
| Preparation of Outline Drawings of Surface-Mounted Devices (SMD) for Frequency Control and Selection - General Rules | |
| Printed board and printed board assemblies \x96 Design and use \x96 Part 5-8: Attachment (land/joint) considerations \x96 Area array components (BGA, FBGA, CGA, LGA) | |
| Printed Board Assemblies - Part 1: Generic Specification - Requirements for Soldered Electrical and Electronic Assemblies Using Surface Mount and Related Assembly Technologies | |
| Printed Board Assemblies - Part 2: Sectional Specification - Requirements for Surface Mount Soldered Assemblies | |
| Printed Board Assemblies - Part 3: Sectional Specification - Requirements for Through-Hole Mount Soldered Assemblies | |
| Printed Board Assemblies - Part 4: Sectional Specification - Requirements for Terminal Soldered Assemblies | |
| Printed board assemblies \x96 Part 1: Generic specification \x96 Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies | |
| PRINTED BOARD ASSEMBLIES \x96 Part 2: Sectional specification \x96 Requirements for surface mount soldered assemblies | |
| Printed board assemblies \x96 Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method | |
| Printed board assembly products \x96 Manufacturing description data and transfer methodology \x96 Part 2-2: Sectional requirements for implementation of printed board fabrication data description | |
| Printed board assembly products \x96 Manufacturing description data and transfer methodology \x96 Part 2: Generic requirements | |
| Printed Boards - Electronic Data Description and Transfer - Part 10: Electronic Data Hierarchy | |
| Printed Boards - Electronic Data Description and Transfer - Part 1: Printed Board Description in Digital Form | |
| Printed Boards - Electronic Data Description and Transfer - Part 7: Bare Board Electric Test Information in Digital Form | |
| Printed Boards and Printed Board Assemblies - Design and Use - Part 1-1: Generic Requirements - Flatness Considerations for Electronic Assemblies | |
| Printed Boards and Printed Board Assemblies - Design and Use - Part 1-2: Generic Requirements - Controlled Impedance | |
| Printed Boards and Printed Board Assemblies - Design and Use - Part 5-1: Attachment (Land/Joint) Considerations - Generic Requirements | |
| Printed Boards and Printed Board Assemblies - Design and Use - Part 5-6: Attachment (Land/Joint) Considerations - Chip Carriers with J-Leads on Four Sides | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 5-3: Attachment (land/joint) considerations \x96 Components with gull-wing leads on two sides | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 5-4: Attachment (land/joint) considerations \x96 Components with J leads on two sides | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 5-5: Attachment (land/joint) considerations \x96 Components with gull-wing leads on four sides | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 6-4: Land pattern design \x96 Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint... | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 7: Electronic component zero orientation for CAD library construction | |
| Printed boards and printed board assemblies Design and use Part 5-2: Attachment (land/joint) considerations Discrete components | |
| Quality Assessment Systems - Part 1: Registration and Analysis of Defects on Printed Board Assemblies | |
| Quality assessment systems \x96 Part 2: Selection and use of sampling plans for inspection of electronic components and packages | |
| Quality assessment systems \x96 Part 3: Selection and use of sampling plans for printed board and laminate endproduct and in-process auditing | |
| Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 1: Generic Specification | |
| Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 2: Sectional Specification - Capability Approval - Section 1: Blank Detail Specification | |
| Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 2: Sectional Specification - Capability Approval | |
| Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 3: Sectional Specification - Qualification Approval Section 1: Blank Detail Specification | |
| Quartz Crystal Units - a Specification in the IEC Quality Assessment System for Electronic Components (IECQ) Part 3: Sectional Specification - Qualification Approval | |
| Radiation Protection Instrumentation - Monitoring Equipment - Atmospheric Radioactive Iodines in the Environment | |
| Radiation Protection Instrumentation - Monitoring Equipment - Radioactive Aerosols in the Environment | |
| Radio Frequency Cables - Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Detail Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185... | |
| Radio Frequency Cables - Part 3-3: Coaxial Cables for Digital Communiaction in Horizontal Floor Wiring - Detail Specification for Coaxial Cables with Foamed Dielectric for Local Area Networks of 185... | |
| RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS | |
| Radio frequency connectors \x96 Part 1-5: Electrical test methods \x96 Rise time degradation | |
| Radio frequency connectors \x96 Part 1: Generic specification \x96 General requirements and measuring methods | |
| Radio- frequency connectors \x96 Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling \x96 Characteristic impedance 50 O... | |
| Radio-Frequency Cables - Part 1: Generic Specification - General, Definitions, Requirements and Test Methods | |
| Radio-Frequency Cables - Part 1: Generic Specification - Section 1: Definitions and Requirements | |
| Radio-Frequency Cables - Part 2: Sectional Specification for Semi-Rigid Radio- Frequency and Coaxial Cables with Polytetrafluoroethyl ene (PTFE) Insulation | |
| Radio-Frequency Cables - Part 3: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Section 1: Detail Specification for Cables of 500 m Reach and up to 10 Mb/s... | |
| Radio-Frequency Cables - Part 3: Sectional Specification for Coaxial Cables for Local Area Networks | |
| Radio-Frequency Cables - Part 4: Sectional Specification for Radiating Cables First Edition | |
| Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 O (type 4,1-9,5) | |
| Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3,5 mm (0,1378 in) | |
| Radio-Frequency Connectors - Part 2: Sectional Specification - Radio Frequency Coaxial Connectors of Type 9,52 | |
| Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,0 mm (0,039 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type 1,0) | |
| Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,85 mm (0,072 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type 1,85) | |
| Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 O, series 4,3-10 | |
| Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 O (type SBMA) | |
| Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors | |
| Radio-frequency connectors \x96 Part 1-2: Electrical test methods \x96 Insertion loss | |
| Radio-frequency connectors \x96 Part 1-4: Electrical test methods \x96 Voltage standing wave ratio, return loss and reflection coefficient | |
| Radio-frequency connectors \x96 Part 1-6: Electrical test methods \x96 RF power | |
| Radio-frequency connectors \x96 Part 1-9: Mechanical test methods \x96 Safety wire hole pull-out | |
| Radio-frequency connectors \x96 Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling \x96 Characteristic impedance 75 ohms (Type 3,5/12) | |
| Radio-frequency connectors \x96 Part 15: Sectional specification \x96 RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling \x96 Characteristic impedance 50 O (type... | |
| Radio-frequency connectors \x96 Part 16: Sectional specification \x96 RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling \x96 Characteristics impedance 50 . (75... | |
| Radio-frequency connectors \x96 Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling \x96 Characteristic impedance 50 ohms (Type... | |
| Radio-frequency connectors \x96 Part 18: Sectional specification \x96 Radio frequency coaxial connectors of type SSMA | |
| Radio-frequency connectors \x96 Part 19: Sectional specification \x96 Radio frequency coaxial connectors of type SSMB | |
| Radio-frequency connectors \x96 Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling - Characteristic impedance 50 ohms (Type SC)... | |
| Radio-frequency connectors \x96 Part 24: Sectional specification \x96 Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F) | |
| Radio-frequency connectors \x96 Part 26: Sectional specification for TNCA series RF coaxial connectors | |
| Radio-frequency connectors \x96 Part 35: Sectional specification for 2,92 series RF connectors | |
| Radio-frequency connectors \x96 Part 37: Sectional specification \x96 STWX8 R.F. connectors | |
| Radio-frequency connectors \x96 Part 38: Sectional specification \x96 Radio frequency coaxial connectors model, slide-in (rack and panel applications) \x96 Characteristic impedance 50 ohm (type TMA) \x96 50 ohm applications | |
| Radio-frequency connectors \x96 Part 39: Sectional specification for CQM series quick lock RF connectors | |
| Radio-frequency connectors \x96 Part 40: Sectional specification for 2.4 series RF connectors | |
| Radio-frequency connectors \x96 Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors | |
| Radio-frequency connectors \x96 Part 42: Sectional specification for CQN series quick lock RF coaxial connectors | |
| Radio-frequency connectors \x96 Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors | |
| Radio-frequency connectors \x96 Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors | |
| Radio-frequency connectors \x96 Part 45: Sectional specification for SQMA series quick lock RF coaxial connectors | |
| Radio-frequency connectors \x96 Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 O cable networks (type F-Quick) | |
| Radio-frequency connectors \x96 Part 48: Sectional specification for series BMP R.F. coaxial connectors | |
| Radio-frequency connectors \x96 Part 49: Sectional specification for SMAA series R.F connectors | |
| Radio-frequency connectors \x96 Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock \x96 Characteristic impedance 50 Ohms (type 7-16) | |
| Radio-frequency connectors \x96 Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system \x96 Characteristic impedance 50 O (type QMA)... | |
| Radio-frequency connectors \x96 Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock \x96 Characteristic impedance 50 O (type QLI) | |
| Radio-frequency connectors \x96 Part 52: Sectional specification for series MMCX RF coaxial connectors | |
| Radio-frequency connectors \x96 Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock \x96 Characteristic impedance 50 O (Type S7-16) | |
| Radio-frequency connectors \x96 Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 O, series 4,3-10 | |
| Radio-frequency connectors \x96 Part 60: Sectional specification for RF coaxial connectors with push on mating \x96 Characteristic impedance 50 Ohm (type SMPM) | |
| Radio-frequency connectors \x96 Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5 | |
| Radio-frequency connectors \x96 Part 63: Sectional specification \x96 RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock \x96 Characteristic impedance 75 O (type... | |
| Radio-frequency connectors \x96 Part 64: Sectional specification \x96 RF coaxial connectors with 0,8 mm inner diameter of outer conductor \x96 Characteristic impedance 50 O (type 0,8) | |
| Radio-frequency connectors \x96 Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 O | |
| Radio-frequency connectors \x96 Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 O (series 2,2-5) | |
| Radio-frequency connectors \x96 Part 67: Sectional specification for series TRL threaded triaxial connectors | |
| Radio-frequency connectors \x96 Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors | |
| Radio-frequency connectors \x96 Part 69: Sectional specification for RF coaxial connectors with push on mating \x96 Characteristic impedance 50 O (type SMP3) | |
| Radio-frequency connectors \x96 Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors \x96 Characteristic Impedance 75 O | |
| Radio-frequency connectors \x96 Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm \x96 Characteristic impedance 50 Ohms \x96 type NEX10 | |
| Radio-frequency connectors \x96 Part 8: Sectional specification \x96 RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock \x96 Characteristic impedance 50 O (type... | |
| Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail Specification | |
| Radio-frequency connectors Part 24: Sectional Specification Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) | |
| Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 OHM (type 1,0/2,3) 50 OHM... | |
| Radio-Frequency Connectors Part 33: Sectional Specification for Series BMA R.F. Connectors | |
| Radio-Frequency Connectors Part 36: Microminiature R.R. Coaxial Connectors with Snap-On Coupling - Characteristic Impedance 50 (Type MCX) | |
| Radiotherapy Equipment - Coordinates, Movements and Scales First Edition | |
| Radiotherapy Equipment - Coordinates, Movements and Scales | |
| Radiotherapy Simulators - Functional Performance Characteristics | |
| Reliability Growth - Statistical Test and Estimation Methods First Edition | |
| RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS | |
| Reliability Stress Screening - Part 2: Electronic Components | |
| Rigid Protective Covers for Live Working on A.C. Installations | |
| Road Vehicles - Elastomeric Cups and Seals for Hydraulic Brake Actuating Cylinders Using a Non-Petroleum Base Hydraulic Brake Fluid (Service Temperature 70 Degrees Celsius Maximum) | |
| Road Vehicles - Elastomeric Seals for Hydraulic Disc Brake Cylinders Using a Non-Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Maximum) | |
| Spherical Plain Radial Bearings, Joint Type - Boundary Dimensions - Part 1: Dimension Series E and G | |
| Spherical Plain Radial Bearings, Joint Type - Boundary Dimensions - Part 2: Dimensions Series EW, Bearings with Extended Inner Ring | |
| Synthetic Organic Esters for Electrical Purposes - Guide for Maintenance of Transformer Esters in Equipment | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules | |
| TERRESTRIAL PHOTOVOLTAIC (PV) MODULES \x96 DESIGN QUALIFICATION AND TYPE APPROVAL \x96 Part 1: Test requirements | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 2: Test procedures | |
| Test methods for electrical materials, circuit boards and other interconnection structures and assemblies \x96 Part 2-720: Detection of defects in interconnection structures by measurement of capacitance | |
| Test methods for electrical materials, circuit boards and other interconnection structures and assemblies \x96 Part 2-809: X/Y coefficient of thermal expansion (CTE) test for thick base materials by TMA | |
| Test Methods for Electrical Materials, Interconnection Structures and Assemblies - Part 1: General Test Methods and Methodology | |
| Test Methods for Electrical Materials, Interconnection Structures and Assemblies - Part 2: Test Methods for Materials for Interconnection Structures | |
| Test methods for electrical materials, interconnection structures and assemblies \x96 Part 5: Test methods for printed board assemblies | |
| Test methods for electrical materials, interconnection structures and assemblies \x96 Part 6: Test methods for materials used in manufacturing electronic assemblies | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-630: Test methods for materials for interconnection structures \x96 Moisture absorption after pressure vessel conditioning... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-804: Test methods for time to delamination \x96 T260, T288, T300 | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-808: Thermal resistance of an assembly by thermal transient method | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 5-502: General test methods for materials and assemblies \x96 Surface Insulation Resistance (SIR) testing of... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 5-504: General test methods for materials and assemblies \x96 Process ionic contamination testing (PICT) | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-302: Detection of plating defects in unpopulated circuit boards by computed tomography (CT) | |
| TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 11: Measurement of melting temperature or melting temperature ranges of solder alloys | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-501: Test methods for materials for interconnection structures \x96 Measurement of resilience strength and resilience... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-719: Test methods for materials for interconnection structures \x96 Relative permittivity and loss tangent (500... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-721: Test methods for materials for interconnection structures \x96 Measurement of relative permittivity and loss... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-801: Thermal conductivity test for base materials | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-803: Test methods for Z-axis expansion of base materials and printed boards | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-805: X/Y CTE test for thin base materials by TMA | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 2-807: Test methods for materials for interconnection structures \x96 Decomposition temperature (Td) using TGA | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 3-719: Test methods for interconnection structures (printed boards) \x96 Monitoring of single plated-through hole (PTH)... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 3-913: Test method for thermal conductivity of printed circuit boards for high-brightness LEDs | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-1: General test methods for materials and assemblies \x96 Guidance for printed board assemblies | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-301: General test methods for materials and assemblies \x96 Soldering paste using fine solder particles... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-3: General test methods for materials and assemblies \x96 Soldering paste for printed board assemblies... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-4: General test methods for materials and assemblies \x96 Solder alloys and fluxed and non-fluxed... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-501: General test methods for materials and assemblies \x96 Surface insulation resistance (SIR) testing of... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-601: General test methods for materials and assemblies \x96 Reflow soldering ability test for solder... | |
| Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification | |
| Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure | |
| Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 3: Sectional Specification for Power Transformers on the Basis of the Capability Approval Procedure First Edition; (IECQ QC... | |
| Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 4: Sectional Specification for Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability... | |
| Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Designations for Cores and Assemblies Part 1: Laminated Cores First Edition | |
| UL Standard for Safety Crystalline Silicon Terrestrial Photovoltaic (PV) Modules \x96 Design Qualification and Type Approval | |
| UL STANDARD FOR SAFETY Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| UL Standard for Safety Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| UL Standard for Safety Terrestrial Photovoltaic (PV) Modules \x96 Design Qualification and Type Approval \x96 Part 1: Test requirements | |
| UL Standard for Safety Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 2: Test procedures | |
| Ultrasonics - Dental Descaler Systems - Measurement and Declaration of the Output Characteristics | |
| ULTRASONICS - POWER MEASUREMENT - RADIATION FORCE BALANCES AND PERFORMANCE REQUIREMENTS | |
| V\xe9hicules routiers - Capuchons en caoutchouc pour cylindres de roue pour freins hydrauliques \xe0 tambour utilisant un liquide de frein \xe0 base non p\xe9troli\xe8re (temp\xe9rature maximale d'utilisation 100 \xb0C) | |
| V\xe9hicules routiers - Dimensions des automobiles et v\xe9hicules tract\xe9s - D\xe9nominations et d\xe9finitions | |
| V\xe9hicules routiers - Flexibles pour dispositifs de freinage hydraulique utilisant un liquide de frein \xe0 base p\xe9troli\xe8re | |
| Workmanship requirements for soldered electronic assemblies \x96 Part 5: Rework, modification and repair of soldered electronic assemblies | |
| Workmanship requirements for soldered electronic assemblies Part 1: General | |
| Workmanship requirements for soldered electronic assemblies Part 2: Surface-mount assemblies | |
| Workmanship requirements for soldered electronic assemblies Part 3: Through-hole mount assemblies | |
| Workmanship requirements for soldered electronic assemblies Part 4: Terminal assemblies |
| << Prev | Next >> |