Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
640
650
660
670
680
690
698
699
700
701
702
703
704
705
706
707
708
709
710
720
730
740
750
760
770
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over... | |
| Acoustics \x96 Determination and application of measurement uncertainties in building acoustics \x96 Part 2: Sound absorption (ISO/FDIS 12999-2:2020) | |
| Acoustics \x96 Determination of acoustic properties in impedance tubes \x96 Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance (ISO/FDIS 10534-2:2023) | |
| Acoustics \x96 Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms \x96 Part 1: Frame document (ISO/FDIS 10848-1:2017) | |
| Acoustics \x96 Measurement of insertion loss of ducted silencers without flow \x96 Laboratory survey method (ISO/FDIS 11691:2020) | |
| Adaptation to climate change \x96 Principles, requirements and guidelines (ISO/FDIS 14090:2019) | |
| Adhesives \x96 Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions \x96 Wedge impact method (ISO/FDIS 11343:2019) | |
| Agricultural and forestry machinery \x96 Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers \x96 Part 1: Machines fitted with an integral combustion engine (ISO/FDIS 11806-1:2021) | |
| Animal feeding stuffs, cereals and milled cereal products \x96 Guidelines for the application of near infrared spectrometry (ISO/FDIS 12099:2017) | |
| Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008) | |
| Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003) | |
| Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) | |
| Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) | |
| Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) | |
| Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005) | |
| Assistive listening devices and systems for active assisted living \x96 Part 1: General | |
| Assistive products for walking, manipulated by one arm \x96 Requirements and test methods \x96 Part4: Walking sticks with three or more legs (ISO/FDIS 11334-4:2024) | |
| Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO/FDIS 10993-3:2014) | |
| Biological evaluation of medical devices \x96 Part 10: Tests for skin sensitization (ISO/FDIS 10993-10:2021) | |
| Biological evaluation of medical devices \x96 Part 11: Tests for systemic toxicity (ISO/FDIS 10993-11:2017) | |
| Biological evaluation of medical devices \x96 Part 15: Identification and quantification of degradation products from metals and alloys (ISO/FDIS 10993-15:2019) | |
| Biological evaluation of medical devices \x96 Part 16: Toxicokinetic study design for degradation products and leachables (ISO/FDIS 10993-16:2016) | |
| Biological evaluation of medical devices \x96 Part 18: Chemical characterization of medical device materials within a risk management process (ISO/FDIS 10993-18:2019) | |
| Biological evaluation of medical devices \x96 Part 1: Evaluation and testing within a risk management process (ISO/FDIS 10993-1:2018) | |
| Biological evaluation of medical devices \x96 Part 2: Animal welfare requirements (ISO/FDIS 10993-2:2022) | |
| Biological evaluation of medical devices \x96 Part 4: Selection of tests for interactions with blood (ISO/FDIS 10993-4:2016) | |
| Biological evaluation of medical devices \x96 Part 6: Tests for local effects after implantation (ISO/FDIS 10993-6:2016) | |
| Biological evaluation of medical devices \x96 Part 9: Framework for identification and quantification of potential degradation products (ISO/FDIS 10993-9:2019) | |
| Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO/FDIS 10434:2020) | |
| Building and civil engineering sealants \x96 Determination of adhesion and cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO/FDIS 11431:2025) | |
| Building environment design \x96 Design, dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 8: Electrical heating systems (ISO/FDIS 11855-8:2023) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 1: Definitions, symbols, and comfort criteria (ISO/FDIS 11855-1:2021) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 2: Determination of the design heating and cooling capacity (ISO/FDIS 11855-2:2021) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 3: Design and dimensioning (ISO/FDIS 11855-3:2021) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO/FDIS... | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 5: Installation (ISO/FDIS 11855-5:2021) | |
| Ceramic tiles \x96 Part 10: Determination of moisture expansion (ISO/FDIS 10545-10:2021) | |
| Ceramic tiles \x96 Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO/FDIS 10545-3:2017) | |
| Ceramic tiles \x96 Part 4: Determination of modulus of rupture and breaking strength (ISO/FDIS 10545-4:2018) | |
| Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009) | |
| Characterization of pavement texture by use of surface profiles \x96 Part 1: Determination of mean profile depth (ISO/FDIS 13473-1:2018) | |
| Cleanrooms and associated controlled environments \x96 Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO/FDIS 14644-13:2017) | |
| Cleanrooms and associated controlled environments \x96 Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO/FDIS 14644-15:2017) | |
| Cleanrooms and associated controlled environments \x96 Part 16: Energy efficiency in cleanrooms and clean air devices (ISO/FDIS 14644-16:2019) | |
| Cleanrooms and associated controlled environments \x96 Part 3: Test methods (ISO/FDIS 14644-3:2019) | |
| Cleanrooms and associated controlled environments \x96 Part 5: Operations (ISO/FDIS 14644-5:2025) | |
| Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram (ISO 11664-5:2009) | |
| Connectors for electrical and electroni components \x96 Product requirements \x96 Part 1: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional... | |
| Connectors for electrical and electronic equipment \x96 Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to... | |
| Connectors for electrical and electronic equipment \x96 Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity \x96 General requirements and tests | |
| Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO/FDIS 1120:2012) | |
| Corrosion of metals and alloys \x96 Alternate immersion test in salt solution (ISO/FDIS 11130:2017) | |
| Corrosion of metals and alloys \x96 Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO/FDIS 10270:2021) | |
| Corrosion of metals and alloys \x96 Classification of low corrosivity of indoor atmospheres \x96 Part 2: Determination of corrosion attack in indoor atmospheres (ISO/FDIS 11844-2:2020) | |
| Cosmetics \x96 Microbiology \x96 Evaluation of the antimicrobial protection of a cosmetic product (ISO/FDIS 11930:2018) | |
| Crude petroleum, petroleum products and related products \x96 Determination of density \x96 Laboratory density meter with an oscillating U tube sensor (ISO/FDIS 12185:2023) | |
| Cycles \x96 Luggage carriers for bicycles \x96 Requirements and test methods (ISO/FDIS 11243:2023) | |
| Dentistry - Contents of technical file for dental implant systems (ISO/FDIS 10451:2010) | |
| Dentistry \x96 Central suction source equipment (ISO/FDIS 10637:2017) | |
| Dentistry \x96 Dental amalgam reusable mixing-capsules (ISO/FDIS 13897:2017) | |
| Dentistry \x96 Dentifrices \x96 Requirements, test methods and marking (ISO/FDIS 11609:2017) | |
| Dentistry \x96 Handpieces and motors (ISO/FDIS 14457:2017) | |
| Dentistry \x96 Magnetic attachments (ISO/FDIS 13017:2020) | |
| Dentistry \x96 Polymer-based crown and veneering materials (ISO/FDIS 10477:2018) | |
| Dentistry \x96 Powered polymerization activators (ISO/FDIS 10650:2018) | |
| Determination of flash point \x96 Abel closed-cup method (ISO/FDIS 13736:2020) | |
| Device embedding assembly technology \x96 Part 1: Generic specification for device embedded substrates | |
| E-Transporters \x96 Part 1: Terminology and classification | |
| Earth-moving and building construction machinery \x96 Electromagnetic compatibility (EMC) of machines with internal electrical power supply \x96 Part 2: Additional EMC requirements for functional safety (ISO/FDIS 13766-2:2017) | |
| Earth-moving machinery and building construction machinery \x96 Electromagnetic compatibility (EMC) \x96 Part 1: General EMC requirements under typical electromagnetic environmental conditions(ISO/FDIS 13766-1:2017) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-16: Particular requirements for hand-held fastener driving tools | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-7: Particular requirements for transportable wall saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-9: Particular requirements for transportable mitre saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums | |
| Electric vehicle battery swap system \x96 Part 1: General and guidance | |
| Electric vehicle battery swap system \x96 Part 2: Safety requirements | |
| Electric welding equipment \x96 Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) \x96 Part 3: Resistance welding equipment | |
| Electrical energy storage (EES) systems \x96 Part 3-1: Planning and performance assessment of electrical energy storage systems \x96 General specification | |
| Electrical energy storage (EES) systems \x96 Part 5-2: Safety requirements for grid-integrated EES systems \x96 Electrochemical-base d systems | |
| Electrical installations for lighting and beaconing of aerodromes \x96 Connecting devices \x96 General requirements and tests | |
| Electrical relays \x96 Testing and measurement \x96 Part 27: Electrical contact noise | |
| Electrical relays \x96 Testing and measurement \x96 Part 34: Fluid contamination | |
| Electrical relays \x96 Testing and measurement \x96 Part 38: Mechanical interlock | |
| Electrical relays \x96 Tests and measurement \x96 Part 28: Thermoelectric electromotive force (e.m.f.) | |
| Electrical relays \x96 Tests and measurements \x96 Part 12: Internal moisture | |
| Electrical relays \x96 Tests and measurements \x96 Part 13: Corrosive atmospheres due to sulfur impact | |
| Electrical relays \x96 Tests and measurements \x96 Part 15: Robustness of terminals | |
| Electrical relays \x96 Tests and measurements \x96 Part 17: Shock, acceleration and vibration | |
| Electrical relays \x96 Tests and measurements \x96 Part 1: Visual inspection and check of dimensions | |
| Electrical relays \x96 Tests and measurements \x96 Part 24: Load transfer | |
| Electrical relays \x96 Tests and measurements \x96 Part 25: Magnetic interference | |
| Electrical relays \x96 Tests and measurements \x96 Part 2: Mechanical tests and weighing | |
| Electrical relays \x96 Tests and measurements \x96 Part 31: Magnetic remanence | |
| Electrical relays \x96 Tests and measurements \x96 Part 33: Continuity of protective earthing connection | |
| Electrical relays \x96 Tests and measurements \x96 Part 35: Resistance to cleaning solvents | |
| Electrical relays \x96 Tests and measurements \x96 Part 37: Terminal temperature rise at rated load | |
| Electrical relays \x96 Tests and measurements \x96 Part 40: Short circuit testing | |
| Electrical relays \x96 Tests and measurements \x96 Part 44: Corrosive atmosphere due to salt mist | |
| Electrical relays \x96 Tests and measurements \x96 Part 49: Long term stability of sealing | |
| Electrically operated spray toilet seats for household and similar use \x96 Methods for measuring the performance \x96 Part 1: General test methods of spray seats | |
| Electrically operated toothbrushes \x96 Method for measuring performance | |
| Electrolyte and water for vented lead acid accumulators \x96 Part 1: Requirements for electrolyte | |
| Electron and laser-beam welded joints \x96 Requirements and recommendations on quality levels for imperfections \x96 Part 1: Steel, nickel, titanium and their alloys (ISO/FDIS 13919-1:2019) | |
| Electronic fee collection \x96 Compliance check communication for autonomous systems (ISO/FDIS 12813:2019) | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to ISO 12813 (ISO/FDIS 13143:2024) | |
| Endurance test methods for die attach materials \x96 Part 2: Temperature cycling test method for die attach materials applied to discrete type power electronic devices | |
| Energy Efficiency \x96 Customer Energy Management Systems -- Part 1: General Requirements and Architecture | |
| Environmental management \x96 Life cycle assessment \x96 Critical review processes and reviewer competencies (ISO/FDIS 14071:2024) | |
| Environmental management systems - Requirements with guidance for use (ISO/FDIS 14001:2015) | |
| Environmental management systems \x96 Guidelines for a flexible approach to phased implementation (ISO/FDIS 14005:2019) | |
| Environmental management systems \x96 Guidelines for incorporating ecodesign (ISO/FDIS 14006:2019) | |
| Environmental solid matrices \x96 Determination of the specific electrical conductivity (ISO/FDIS 11265:2025) | |
| Ergonomic principles related to mental workload \x96 Part 1: General issues and concepts, terms and definitions (ISO/FDIS 10075-1:2017) | |
| Ergonomic principles related to mental workload \x96 Part 2: Design principles (ISO/FDIS 10075-2:2024) | |
| Ergonomics of the physical environment \x96 Subjective judgement scales for assessing physical environments (ISO/FDIS 10551:2019) | |
| Event video data recorder for road vehicle accidents \x96 Part 2: Test methods for evaluating the performance of basic functions | |
| Extended thermal cycling of PV modules \x96 Test procedure | |
| Fans \x96 Dimensions (ISO/FDIS 13351:2024) | |
| Fans \x96 Efficiency classification for fans \x96 Part 2: Standard losses for drive components (ISO/FDIS 12759-2:2018) | |
| Fans \x96 Efficiency classification for fans \x96 Part 4: Driven fans at maximum operating speed (ISO/FDIS 12759-4:2019) | |
| Fans \x96 Efficiency classification for fans \x96 Part 5: Jet fans (ISO/FDIS 12759-5:2021) | |
| Fans \x96 Vocabulary and definitions of categories \x96 Part 1: Vocabulary (ISO/FDIS 13349-1:2022) | |
| Fans \x96 Vocabulary and definitions of categories \x96 Part 2: Categories (ISO/FDIS 13349-2:2022) | |
| Fasteners \x96 Non-electrolytically applied zinc flake coatings (ISO/FDIS 10683:2018) | |
| Fasteners \x96 Parallel grooved pins \x96 Half-length diamond grooves (ISO/FDIS 13672:2024) | |
| Fasteners \x96 Reverse-taper grooved pins \x96 One quarter-length progressive grooves on both sides (ISO/FDIS 13670:2025) | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 12: Ring-cores | |
| Fibre optic interconnecting devices and passive components \x96 Connector optical interfaces for enhanced macro bend multimode fibre \x96 Part 2-2: Connection parameters of physically contacting 50 \xb5m core diameter fibres... | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic connector optical interfaces \x96 Part 1: Enhanced macro bend loss multimode 50 um core diameter fibres \x96 General and guidance... | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic connector optical interfaces for enhanced macrobend multimode fibres \x96 Part 3-61: Connector parameters of physically contacting 50 \xb5m core diameter... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties (ISO 14544:2013) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at high temperature \x96 Determination of compressive properties (ISO/FDIS 14544:2024) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at high temperature \x96 Determination of tensile properties (ISO/FDIS 14574:2024) | |
| Fire safety \x96 Vocabulary (ISO/FDIS 13943:2017) | |
| Fire-fighting hoses \x96 Rubber and plastics suction hoses and hose assemblies (ISO/FDIS 14557:2021) | |
| Fluids for electrotechnical application \x96 Specification of gases alternative to SF6 to be used in electrical power equipment | |
| Gas cylinders \x96 Compatibility of cylinder and valve materials with gas contents \x96 Part 5: Test methods for evaluating plastic liners (ISO/FDIS 11114-5:2021) | |
| Gas cylinders \x96 Compressed gas cylinders and tubes \x96 Stamp marking (ISO/FDIS 13769:2018) | |
| Gas cylinders \x96 Cylinder bundles \x96 Design, manufacture, testing and inspection (ISO/FDIS 10961:2019) | |
| Gas cylinders \x96 Cylinder valves \x96 Manufacturing tests and examinations (ISO/FDIS 14246:2021) | |
| Gas cylinders \x96 Cylinder valves \x96 Specification and type testing (ISO/FDIS 10297:2023) | |
| Gas cylinders \x96 Fitting of valves to gas cylinders (ISO/FDIS 13341:2025) | |
| Gas cylinders \x96 Non-refillable metallic gas cylinders \x96 Specification and test methods (ISO/FDIS 11118:2024) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Self-closing (ISO/FDIS 14245:2019) | |
| Gas cylinders \x96 Valve protection caps, guards and shrouds \x96 Design, construction and tests (ISO/FDIS 11117:2019) | |
| Gas cylinders \x96 Vocabulary (ISO/FDIS 10286:2025) | |
| Gas cylinders \x96 Welded aluminium-alloy, carbon and stainless steel gas cylinders \x96 Periodic inspection and testing (ISO/FDIS 10460:2018) | |
| Gas welding equipment \x96 Acetylene manifold systems for welding, cutting and allied processes \x96 General requirements (ISO/FDIS 14114:2017) | |
| General guidance on reuse and repurposing of secondary cells and batteries | |
| Geometrical product specifications (GPS) \x96 Acceptance and reverification tests for coordinate measuring systems (CMS) \x96 Part 10: Laser trackers (ISO/FDIS 10360-10:2021) | |
| Geometrical product specifications (GPS) \x96 Acceptance and reverification tests for coordinate measuring systems (CMS) \x96 Part 5: CMMs using single and multiple stylus contacting probing systems using discrete point and/or... | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 1: Design and metrological characteristics of callipers (ISO/FDIS 13385-1:2019) | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 2: Calliper depth gauges; Design and metrological characteristics (ISO/FDIS 13385-2:2019) | |
| Geometrical product specifications (GPS) \x96 Geometrical tolerancing \x96 Tolerances of form, orientation, location and run-out (ISO/FDIS 1101:2016) | |
| Geosynthetics \x96 Determination of friction characteristics \x96 Part 1: Direct shear test (ISO/FDIS 12957-1:2018) | |
| Geosynthetics \x96 Identification on site (ISO/FDIS 10320:2018) | |
| Geosynthetics \x96 Index test procedure for the evaluation of mechanical damage under repeated loading \x96 Damage caused by granular material (laboratory test method) (ISO/FDIS 10722:2019) | |
| Geosynthetics \x96 Installing and retrieving samples in the field for durability assessment (ISO/FDIS 13437:2019) | |
| Geosynthetics \x96 Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation (ISO/FDIS 13438:2018) | |
| Geosynthetics \x96 Wide-width tensile test (ISO/FDIS 10319:2024) | |
| Geotechnical investigation and testing \x96 Identification and classification of rock \x96 Part 1: Identification and description (ISO/FDIS 14689-1:2017) | |
| Geotechnical investigation and testing \x96 Identification and classification of soil \x96 Part 1: Identification and description (ISO/FDIS 14688-1:2017) | |
| Geotechnical investigation and testing \x96 Identification and classification of soil \x96 Part 2: Principles for a classification (ISO/FDIS 14688-2:2017) | |
| Geotextiles and geotextile-related products \x96 Determination of the characteristic opening size (ISO/FDIS 12956:2019) | |
| Geotextiles and geotextile-related products \x96 Determination of water permeability characteristics normal to the plane, without load (ISO/FDIS 11058:2019) | |
| Geotextiles and geotextile-related products \x96 Strength of internal structural junctions \x96 Part 1: Geocells (ISO/FDIS 13426-1:2019) | |
| Geotextiles and geotextile-related products \x96 Strength of internal structural junctions \x96 Part 2: Geocomposites (ISO/FDIS 13426-2:2024) | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 3: Laminated glass (ISO/FDIS 12543-3:2021) | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 4: Test methods for durability (ISO/FDIS 12543-4:2021) | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 5: Dimensions and edge finishing (ISO/FDIS 12543-5:2021) | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 6: Appearance (ISO/FDIS 12543-6:2021) | |
| Glass packaging \x96 26 H 126 crown finish \x96 Dimensions (ISO/FDIS 12822:2019) | |
| Glass packaging \x96 26 H 180 crown finish \x96 Dimensions (ISO/FDIS 12821:2019) | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 1: General requirements (ISO/FDIS 12643-1:2020) | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 2: Prepress and press equipment and systems (ISO/FDIS 12643-2:2020) | |
| Greenhouse gases \x96 Carbon footprint of products \x96 Requirements and guidelines for quantification (ISO/FDIS 14067:2018) | |
| Greenhouse gases \x96 General principles and requirements for bodies validating and verifying environmental information (ISO/FDIS 14065:2020) | |
| Greenhouse gases \x96 Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO/FDIS 14064-1:2018) | |
| Greenhouse gases \x96 Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO/FDIS 14064-2:2018) | |
| Greenhouse gases \x96 Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO/FDIS 14064-3:2018) | |
| Greenhouse gases \x96 Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO/FDIS 14083:2022) | |
| Grid integration of renewable energy generation \x96 Terms and definitions | |
| Guidance for installation procedures and tolerances of hydroelectric machines \x96 Part 6: Vertical Pelton turbines | |
| Guide for installation procedures and tolerances of hydroelectric machines \x96 Part 5: Bulb turbines and generators | |
| Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications | |
| Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) (ISO/FDIS 11073-10406:2012) | |
| Health informatics - Personal health device communication - Part 10407: Device specialization - Blood pressure monitor (ISO/FDIS 11073-10407:2009) | |
| Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale (ISO/FDIS 11073-10415:2009) | |
| Health informatics - Point-of-care medical device communication - Part 20601: Application profile - Optimized exchange protocol (ISO/FDIS 11073-20601:2009) | |
| Health informatics \x96 Syntax to represent the content of healthcare classification systems \x96 Classification Markup Language (ClaML) (ISO/FDIS 13120:2018) | |
| High-temperature secondary batteries \x96 Part 1: General requirements | |
| High-temperature secondary batteries \x96 Part 2: Safety requirements and tests | |
| Home and building electronic systems (HBES) and building automation and control systems (BACS) \x96 Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS... | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 6: Requirements for planning and installation | |
| Horticultural lighting \x96 LED packages for horticultural lighting \x96 Part 1: Specification sheet | |
| Horticultural lighting \x96 LED packages for horticultural lighting \x96 Part 2: Binning | |
| Household and similar electrical appliances \x96 Accessibility of control elements, doors, lids, drawers and handles | |
| Household and similar electrical appliances \x96 Product information properties \x96 Part 1: Fundamentals | |
| Human-machine interfaces for process automation systems | |
| IEC 63077 ED1: Good refurbishment practices for medical imaging equipment | |
| Implants for surgery \x96 Active implantable medical devices \x96 Part 2: Cardiac pacemakers (ISO/FDIS 14708-2:2019) | |
| Implants for surgery \x96 Active implantable medical devices \x96 Part 5: Circulatory support devices (ISO/FDIS 14708-5:2020) | |
| Implants for surgery \x96 Active implantable medical devices \x96 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) (ISO/FDIS 14708-6:2019) | |
| Implants for surgery \x96 Active implantable medical devices \x96 Part 7: Particular requirements for cochlear and auditory brainstem implant systems (ISO/FDIS 14708-7:2019) | |
| Industrial Facility Energy Management System (FEMS) \x96 Functions and Information Flows | |
| Industrial furnaces and associated processing equipment \x96 Safety \x96 Part 4: Protective systems (ISO/FDIS 13577-4:2022) | |
| Industrial systems, installations and equipment and industrial products \x96 Structuring principles and reference designations \x96 Part 2: Classification of objects and codes for classes | |
| Industrial-process measurement, control and automation \x96 Digital Factory framework \x96 Part 1: General principles | |
| Industrial-process measurement, control and automation \x96 Digital Factory framework \x96 Part 2: Model elements | |
| Industrial-process measurement, control and automation \x96 Digital Factory framework Part 3: Application of Digital Factory for life cycle management of production systems | |
| Industrial-process measurement, control and automation \x96 Life-cycle management for systems and components | |
| Information exchange for electric vehicle charging roaming service \x96 Part 1: General | |
| Information exchange for Electric Vehicle charging roaming service \x96 Part 2: Use cases | |
| Installations for electroheating and electromagnetic processing \x96 Test methods for induction through-heating installations | |
| Insulating liquids \x96 Unused modified or blended esters for electrotechnical applications | |
| Integrated circuits \x96 Three dimensional integrated circuits \x96 Part 3: Model and measurement conditions of through-silicon via | |
| Laboratory glassware \x96 Petri dishes (ISO/FDIS 13132:2023) | |
| Lasers and laser-related equipment \x96 Determination of laser resistance of tracheal tube shaft and tracheal cuffs (ISO/FDIS 11990:2018) | |
| LCD multi-screen display terminals \x96 Part 2: Measuring methods | |
| Lead-acid batteries for propulsion power of lightweight vehicles \x96 General requirements and methods of test | |
| Leather \x96 Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography \x96 Part 1: Acetonitrile extraction method (ISO/FDIS 13365-1:2020) | |
| Leather \x96 Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography \x96 Part 2: Artificial perspiration extraction method (ISO/FDIS 13365-2:2020) | |
| Leather \x96 Chemical tests \x96 Quantitative analysis of tanning agents by filter method (ISO/FDIS 14088:2020) | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to cycles of to-and-fro rubbing (ISO/FDIS 11640:2018) | |
| LED light source characteristics \x96 Part 1: Data sheets | |
| LED light source characteristics \x96 Part 2: Design parameters and values | |
| LED packages for general lighting \x96 Specification sheet | |
| Lighting control interface for dimming \x96 Analogue voltage dimming interface for electronic current sourcing controlgear | |
| Lighting equipment \x96 Non-active mode power measurement | |
| Lightning density based on lightning location systems (LLS) \x96 General principles | |
| Lithium ion capacitors for use in electric and electronic equipment \x96 Test methods for electrical characteristics | |
| Low resistance measurements \x96 Methods and guidance | |
| Lubricants, industrial oils and related products (class L) \x96 Family H (Hydraulic systems) \x96 Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO/FDIS 12922:2019) | |
| Machinery for forestry \x96 Portable chain-saw safety requirements and testing \x96 Part 1: Chain-saws for forest service (ISO/FDIS 11681-1:2020) | |
| Machinery for forestry \x96 Portable chain-saw safety requirements and testing \x96 Part 2: Chain-saws for tree service (ISO/FDIS 11681-2:2020) | |
| Maritime navigation and radiocommunication equipment and systems \x96 Data interface \x96 Part 1: S-421 route plan based on S-100 | |
| Measurement methods of blue light characteristics and related optical performance for visual display terminals | |
| Mechanical structures for electrical and electronic equipment \x96 Aisle containment for IT cabinets \x96 Part 1: Dimensions and mechanical requirements | |
| Mechanical structures for electrical and electronic equipment \x96 Aisle containment for IT cabinets \x96 Part 2: Details of air flow, air separation and air cooling requirements | |
| Medical electrical equipment \x96 Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment | |
| Medical Electrical Equipment \x96 Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment | |
| Medical Electrical Equipment \x96 Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation | |
| Medical electrical equipment \x96 Part 2-89: Particular requirements for the basic safety and essential performance of medical beds for children | |
| Medical suction equipment \x96 Part 4: General requirements (ISO/FDIS 10079-4:2021) | |
| Medical supply units (ISO/FDIS 11197:2019) | |
| Metallic and other inorganic coatings \x96 Measurement of mass per unit area \x96 Review of gravimetric and chemical analysis methods (ISO/FDIS 10111:2018) | |
| Metallic and oxide coatings \x96 Measurement of coating thickness \x96 Microscopical method (ISO/FDIS 1463:2021) | |
| Metallic materials \x96 Determination of forming-limit curves for sheet and strip \x96 Part 2: Determination of forming-limit curves in the laboratory (ISO/FDIS 12004-2:2020) | |
| Metallic materials \x96 Sheet and strip \x96 Determination of plastic strain ratio (ISO/FDIS 10113:2019) | |
| Metallic powders \x96 Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO/FDIS 10070:2019) | |
| Metallic powders \x96 Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO/FDIS 13947:2024) | |
| Methodology for determining the functionality of detectors \x96 Part 1: Passive infra-red detectors for presence and motion detection | |
| Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. \x96 Part 2: Enumeration method (ISO/FDIS 11290-2:2017) | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Listeria monocytogenes and other Listeria spp. \x96 Part 1: Detection method (ISO/FDIS 11290-1:2017) | |
| Monitoring and measuring systems used for data collection, aggregation and analysis \x96 Part 1: Device requirements | |
| Multi-channel radio-frequency connectors \x96 Part 2: Sectional specification for MQ4 series circular connectors | |
| Multi-radio frequency channel connectors Part 1:Generic specification-Genera l requirements and measuring methods | |
| Natural gas \x96 Gas sampling (ISO/FDIS 10715:2022) | |
| Needle-based injection systems for medical use \x96 Requirements and test methods \x96 Part 7: Accessibility for persons with visual impairment (ISO 11608-7:2016) | |
| Non-active surgical implants \x96 General requirements (ISO/FDIS 14630:2024) | |
| Non-active surgical implants \x96 Mammary implants \x96 Particular requirements (ISO/FDIS 14607:2017) | |
| Non-destructive testing \x96 Eddy current testing \x96 Vocabulary (ISO/FDIS 12718:2019) | |
| Non-destructive testing \x96 Industrial radiographic films \x96 Part 2: Control of film processing by means of reference values (ISO/FDIS 11699-2:2018) | |
| Non-destructive testing of steel tubes \x96 Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO/FDIS 10893-6:2018) | |
| Non-destructive testing of steel tubes \x96 Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO/FDIS 10893-7:2018) | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Acceptance levels (ISO/FDIS 11666:2017) | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Use of automated phased array technology (ISO/FDIS 13588:2018) | |
| Offshore containers and associated lifting sets \x96 Part 1: Design, manufacture and marking of offshore containers (ISO/FDIS 10855-1:2018) | |
| Offshore containers and associated lifting sets \x96 Part 2: Design, manufacture and marking of lifting sets (ISO/FDIS 10855-2:2018) | |
| Offshore containers and associated lifting sets \x96 Part 3: Periodic inspection, examination and testing (ISO/FDIS 10855-3:2018) | |
| Oil and gas industries \x96 Control and mitigation of fires and explosions on offshore production installations \x96 Requirements and guidelines (ISO/FDIS 13702:2023) | |
| Oil and gas industries including lower carbon energy \x96 Cements and materials for well cementing \x96 Part 5: Determination of shrinkage and expansion of well cement formulations (ISO/FDIS 10426-5:2024) | |
| Oil and gas industries including lower carbon energy \x96 Completion fluids and materials \x96 Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO/FDIS 13503-2:2024)... | |
| Oil and gas industries including lower carbon energy \x96 Equipment for well cementing \x96 Part 1: Casing bow-spring centralizers (ISO/FDIS 10427-1:2024) | |
| Oil and gas industries including lower carbon energy \x96 Pipeline transportation systems \x96 Requirements and guidance for pipeline life extension assessment (ISO/FDIS 12747:2025) | |
| Oil and gas industries including lower carbon energy \x96 Wet thermal insulation systems for pipelines and subsea equipment \x96 Part 1: Validation of materials and insulation systems (ISO/FDIS 12736-1:2023) | |
| Oil and gas industries including lower carbon energy \x96 Wet thermal insulation systems for pipelines and subsea equipment \x96 Part 2: Qualification processes for production and application procedures (ISO/FDIS 12736-2:2023)... | |
| Oil and gas industries including lower carbon energy \x96 Wet thermal insulation systems for pipelines and subsea equipment \x96 Part 3: Interfaces between systems, field joint system, field repairs and... | |
| Ophthalmic optics \x96 Contact lenses and contact lens care products \x96 Determination of preservative uptake and release (ISO/FDIS 11986:2017) | |
| Ophthalmic optics \x96 Spectacle frames \x96 Requirements and test methods (ISO/FDIS 12870:2024) | |
| Optics and photonics \x96 Lasers and laser-related equipment \x96 Test methods for laser beam power (energy) density distribution (ISO/FDIS 13694:2018) | |
| Optics and photonics \x96 Lasers and laser-related equipment \x96 Vocabulary and symbols (ISO/DIS 11145:2017) | |
| Packaging for terminally sterilized medical devices \x96 Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO/FDIS 11607-1:2018) | |
| Packaging for terminally sterilized medical devices \x96 Part 2: Validation requirements for forming, sealing and assembly processes (ISO/FDIS 11607-2:2018) | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 5: Protective paint systems (ISO/FDIS 12944-5:2017) | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 6: Laboratory performance test methods (ISO/FDIS 12944-6:2017) | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 7: Execution and supervision of paint work (ISO/FDIS 12944-7:2017) | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 8: Development of specifications for new work and maintenance (ISO/FDIS 12944-8:2017) | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO/FDIS... | |
| Paints and varnishes \x96 Determination of resistance to cyclic corrosion conditions \x96 Part 1: Wet (salt fog)/dry/humidity (ISO/FDIS 11997-1:2017) | |
| Particular requirements for load-shedding equipment (LSE) | |
| Particular requirements for Source-Switching Equipment (SSE) | |
| Personal flotation devices \x96 Part 10: Selection and application of personal flotation devices and other relevant devices (ISO/FDIS 12402-10:2019) | |
| Personal flotation devices \x96 Part 2: Lifejackets, performance level 275 \x96 Safety requirements (ISO/FDIS 12402-2:2019) | |
| Personal flotation devices \x96 Part 3: Lifejackets, performance level 150 Safety requirements (ISO/FDIS 12402-3:2019) | |
| Personal flotation devices \x96 Part 4: Lifejackets, performance level 100 \x96 Safety requirements (ISO/FDIS 12402-4:2019) | |
| Personal flotation devices \x96 Part 5: Buoyancy aids (level 50) \x96 Safety requirements (ISO/FDIS 12402-5:2019) | |
| Personal flotation devices \x96 Part 6: Special application lifejackets and buoyancy aids \x96 Safety requirements and additional test methods (ISO/FDIS 12402-6:2019) | |
| Personal flotation devices \x96 Part 7: Materials and components \x96 Safety requirements and test methods (ISO/FDIS 12402-7:2019) | |
| Personal flotation devices \x96 Part 8: Accessories \x96 Safety requirements and test methods (ISO/FDIS 12402-8:2020) | |
| Personal flotation devices \x96 Part 9: Evaluation (ISO/FDIS 12402-9:2020) | |
| Personal protective equipment \x96 Footwear \x96 Test method for slip resistance (ISO/FDIS 13287:2019) | |
| Personal protective equipment \x96 Test methods for sunglasses and related eyewear (ISO/FDIS 12311:2023) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO/FDIS 13628-5:2009) | |
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO/FDIS 13679:2011) | |
| Petroleum and natural gas industries \x96 Cements and materials for well cementing \x96 Part 3: Testing of deepwater well cement formulations (ISO/FDIS 10426-3:2019) | |
| Petroleum and natural gas industries \x96 Cements and materials for well cementing \x96 Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO/FDIS 10426-4:2019) | |
| Petroleum and natural gas industries \x96 Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material \x96 Technical delivery conditions (ISO/FDIS 13680:2020) | |
| Petroleum and natural gas industries \x96 Glass-reinforced plastics (GRP) piping \x96 Part 1: Vocabulary, symbols, applications and materials (ISO/FDIS 14692-1:2017) | |
| Petroleum and natural gas industries \x96 Glass-reinforced plastics (GRP) piping \x96 Part 2: Qualification and manufacture (ISO/FDIS 14692-2:2017) | |
| Petroleum and natural gas industries \x96 Glass-reinforced plastics (GRP) piping \x96 Part 3: System design (ISO/FDIS 14692-3:2017) | |
| Petroleum and natural gas industries \x96 Glass-reinforced plastics (GRP) piping \x96 Part 4: Fabrication, installation and operation (ISO/FDIS 14692-4:2017) | |
| Petroleum and natural gas industries \x96 Offshore production installations \x96 Process safety systems (ISO/FDIS 10418:2019) | |
| Petroleum and natural gas industries \x96 Steel drill pipe (ISO/FDIS 11961:2018) | |
| Photovoltaic cells \x96 Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells | |
| Photovoltaic power systems \x96 DC arc detection and interruption | |
| Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013) | |
| Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO/FDIS 13802:2015) | |
| Plastics \x96 Acquisition and presentation of comparable multipoint data \x96 Part 1: Mechanical properties (ISO/FDIS 11403-1:2021) | |
| Plastics \x96 Acquisition and presentation of comparable single-point data \x96 Part 1: Moulding materials (ISO/FDIS 10350-1:2017) | |
| Plastics \x96 Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionizatio n time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO/FDIS 10927:2018) | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 1: General principles (ISO/FDIS 11357-1:2022) | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 2: Determination of glass transition temperature and step height (ISO/FDIS 11357-2:2019) | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO/FDIS 11357-3:2017) | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO/FDIS 11357-6:2017) | |
| Plastics \x96 Methods for determining the density of non-cellular plastics \x96 Part 1: Immersion method, liquid pycnometer method and titration method (ISO/FDIS 1183-1:2018) | |
| Plastics \x96 Methods for determining the density of non-cellular plastics \x96 Part 2: Density gradient column method (ISO/FDIS 1183-2:2018) | |
| Plastics \x96 Polycarbonate sheets \x96 Types, dimensions and characteristics (ISO/FDIS 11963:2019) | |
| Plastics \x96 Symbols and abbreviated terms \x96 Part 4: Flame retardants (ISO/FDIS 1043-4:2021) | |
| Plastics \x96 Unplasticized poly(vinyl chloride) sheets \x96 Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO/FDIS 11833-1:2019) | |
| Plastics piping systems for renovation of underground gas supply networks \x96 Part 1: General (ISO/FDIS 11299-1:2018) | |
| Plastics piping systems for renovation of underground gas supply networks \x96 Part 2: Lining with continuous pipes (ISO/FDIS 11299-2:2018) | |
| Plastics piping systems for renovation of underground gas supply networks \x96 Part 3: Lining with close-fit pipes (ISO/FDIS 11299-3:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks \x96 Part 3: Lining with close-fit pipes (ISO/FDIS 11296-3:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks \x96 Part 4: Lining with cured-in-place pipes (ISO/FDIS 11296-4:2017) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks \x96 Part 7: Lining with spirally-wound pipes (ISO/FDIS 11296-7:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks \x96 Part 9: Lining with a rigidly anchored plastics inner layer (ISO/FDIS 11296-9:2022) | |
| Plastics piping systems for renovation of underground water supply networks \x96 Part 3: Lining with close-fit pipes (ISO/FDIS 11298-3:2018) | |
| Plastics piping systems for renovation of underground water supply networks \x96 Part 4: Lining with cured-in-place pipes (ISO/FDIS 11298-4:2020) | |
| Plastics piping systems used for the rehabilitation of pipelines \x96 Classification and overview of strategic, tactical and operational activities (ISO/FDIS 11295:2021) | |
| Power frequency overvoltage protective devices for household and similar applications (POP) | |
| Power line communication for DC shutdown equipment \x96 Communication signal, physical layer | |
| Powered hand-held hedge trimmers \x96 Safety (ISO/FDIS 10517:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for metallic blast-cleaning abrasives \x96 Part 1: General introduction and classification (ISO/FDIS 11124-1:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for metallic blast-cleaning abrasives \x96 Part 2: Chilled-iron grit (ISO/FDIS 11124-2:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for metallic blast-cleaning abrasives \x96 Part 3: High-carbon cast-steel shot and grit (ISO/FDIS 11124-3:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for metallic blast-cleaning abrasives \x96 Part 4: Low-carbon cast-steel shot (ISO/FDIS 11124-4:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 1: General introduction and classification (ISO/FDIS 11126-1:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 3: Copper refinery slag (ISO/FDIS 11126-3:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 4: Coal furnace slag (ISO/FDIS 11126-4:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 5: Nickel refinery slag (ISO/FDIS 11126-5:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 6: Iron and steel slags (ISO/FDIS 11126-6:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 7: Fused aluminium oxide (ISO/FDIS 11126-7:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Specifications for non-metallic blast-cleaning abrasives \x96 Part 8: Olivine(ISO/FDIS 11126-8:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 1: Sampling (ISO/FDIS 11125-1:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 2: Determination of particle size distribution (ISO/FDIS 11125-2:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 3: Determination of hardness (ISO/FDIS 11125-3:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 4: Determination of apparent density (ISO/FDIS 11125-4:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 5: Determination of percentage defective particles and of microstructure (ISO/FDIS... | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 6: Determination of foreign matter (ISO/FDIS 11125-6:2018) | |
| Preparation of steel substrates before application of paints and related products \x96 Test methods for metallic blast-cleaning abrasives \x96 Part 7: Determination of moisture (ISO/FDIS 11125-7:2018) | |
| Pressure regulators for use with medical gases \x96 Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO/FDIS 10524-1:2017) | |
| Pressure regulators for use with medical gases \x96 Part 2: Manifold and line pressure regulators (ISO/FDIS 10524-2:2017) | |
| Pressure regulators for use with medical gases \x96 Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO/FDIS 10524-3:2018) | |
| Protection against lightning \x96 Thunderstorm warning systems | |
| Protective clothing \x96 Vocabulary (ISO/FDIS 11610:2023) | |
| Protective clothing against heat and flame \x96 Part 1: Test method for complete garments \x96 Measurement of transferred energy using an instrumented manikin (ISO/FDIS 13506-1:2024) | |
| Protective clothing against heat and flame \x96 Part 2: Skin burn injury prediction \x96 Calculation requirements and test cases (ISO/FDIS 13506-2:2024) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 1: Test rig for testing resistance to cutting by a chainsaw (ISO/FDIS 11393-1:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 2: Performance requirements and test methods for leg protectors (ISO/FDIS 11393-2:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 3: Test methods for footwear (ISO/FDIS 11393-3:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 4: Performance requirements and test methods for protective gloves (ISO/FDIS 11393-4:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 5: Performance requirements and test methods for protective gaiters (ISO/FDIS 11393-5:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 6: Performance requirements and test methods for upper body protectors (ISO/FDIS 11393-6:2018) | |
| Protocol for management of electric vehicles charging and discharging infrastructures \x96 Part 1: Basic definitions, use cases and architectures | |
| Pump system energy assessment (ISO/ASME FDIS 14414:2018) | |
| Qi specification version 2.0 \x96 Part 10: Mpp system specification | |
| Qi specification version 2.0 \x96 Part 11: Mpp communications protocol | |
| Qi specification version 2.0 \x96 Part 1: Introduction | |
| Qi specification version 2.0 \x96 Part 2: Glossary | |
| Qi specification version 2.0 \x96 Part 3: Mechanical, thermal, and user interface | |
| Qi specification version 2.0 \x96 Part 4: Power delivery | |
| Qi specification version 2.0 \x96 Part 5: Communications physical layer | |
| Qi specification version 2.0 \x96 Part 6: Communications protocol | |
| Qi specification version 2.0 \x96 Part 7: Foreign object detection | |
| Qi specification version 2.0 \x96 Part 8: Nfc tag protection | |
| Qi specification version 2.0 \x96 Part 9: Authentication protocol | |
| Quantities and units \x96 Part 6: Electromagnetism | |
| Radiological protection \x96 Criteria and performance limits for the periodic evaluation of dosimetry services for external radiation (ISO/FDIS 14146:2024) | |
| Rapeseed - Determination of chlorophyll content - Spectrometric method (ISO/FDIS 10519:2015) | |
| Reaction to fire tests \x96 Ignitability of products subjected to direct impingement of flame \x96 Part 2: Single-flame source test (ISO/FDIS 11925-2:2019) | |
| Resilient floor coverings \x96 Homogeneous poly(vinyl chloride) floor covering \x96 Specifications (ISO/FDIS 10581:2019) | |
| Rice \x96 Determination of biometric characteristics of kernels (ISO/FDIS 11746:2019) | |
| Road vehicles \x96 Compressed natural gas (CNG) refuelling connector (ISO 14469:2017) | |
| Robotics \x96 Safety requirements \x96 Part 1: Industrial robots (ISO/FDIS 10218-1:2024) | |
| Robotics \x96 Safety requirements \x96 Part 2: Industrial robot applications and robot cells (ISO/FDIS 10218-2:2024) | |
| Rubber and plastics hoses and hose assemblies \x96 Hydrostatic testing (ISO/FDIS 1402:2021) | |
| Rubber and plastics hoses and tubing \x96 Measurement of flexibility and stiffness \x96 Part 2: Bending tests at sub-ambient temperatures (ISO/FDIS 10619-2:2021) | |
| Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO/FDIS 14119:2013) | |
| Safety of machinery \x96 Laser processing machines \x96 Part 1: General safety requirements (ISO/FDIS 11553-1:2019) | |
| Safety of machinery \x96 Positioning of safeguards with respect to the approach of the human body (ISO/FDIS 13855:2024) | |
| Safety of machinery \x96 Prevention of unexpected start-up (ISO/FDIS 14118:2017) | |
| Safety of machinery \x96 Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO/FDIS 13857:2019) | |
| Safety of machinery \x96 Two-hand control devices \x96 Principles for design and selection (ISO/FDIS 13851:2018) | |
| Secondary cells and batteries \x96 Marking symbols for identification of their chemistry | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Sealed nickel-metal hydride cells and batteries for use in industrial applications \x96 Part 1: Performance | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications \x96 Guidance on environmental aspects | |
| Semiconductor devices \x96 Guidelines for reliability qualification plans \x96 Part 2: Concept of mission profile | |
| Semiconductor devices \x96 Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment \x96 Part 1: Arbitrary and random mechanical vibrations | |
| Small craft \x96 Craft identification \x96 Coding system (ISO/FDIS 10087:2018) | |
| Small craft \x96 Electrical systems \x96 Alternating and direct current installations (ISO/FDIS 13297:2020) | |
| Small craft \x96 Field of vision from the steering position (ISO/FDIS 11591:2018) | |
| Small craft \x96 Hull construction and scantlings \x96 Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO/FDIS 12215-5:2018) | |
| Small craft \x96 Hull construction and scantlings \x96 Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5 (ISO/FDIS 12215-7:2019) | |
| Small craft \x96 Hull construction and scantlings \x96 Part 9: Sailing craft appendages (ISO/FDIS 12215-9:2025) | |
| Small craft \x96 Liquefied petroleum gas (LPG) systems (ISO/FDIS 10239:2024) | |
| Small craft \x96 Owner's manual (ISO/FDIS 10240:2019) | |
| Small craft \x96 Watertight or quick-draining recesses and cockpits (ISO/FDIS 11812:2019) | |
| Small craft \x96 Windows, portlights, hatches, deadlights and doors \x96 Strength and watertightness requirements (ISO/FDIS 12216:2019) | |
| Soil quality \x96 Determination of dry bulk density (ISO/FDIS 11272:2016) | |
| Soil quality \x96 Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO/FDIS 11260:2017) | |
| Soil quality \x96 Determination of exchangeable acidity using barium chloride solution as extractant (ISO/FDIS 14254:2017) | |
| Soil quality \x96 Determination of particle density (ISO/FDIS 11508:2017) | |
| Soil quality \x96 Determination of the water-retention characteristic \x96 Laboratory methods (ISO/FDIS 11274:2019) | |
| Standard interface for connecting charging stations to local energy management systems \x96 Part 1: General requirements, use cases and abstract messages | |
| Standard Interface for Connecting Charging Stations to Local Energy Management Systems \x96 Part 2 Specific Data Model Mapping | |
| Standard interface for connecting charging stations to local energy management systems \x96 Part 3 Communication protocol and cybersecurity specific aspects | |
| Standard test radio-frequency connectors \x96 Part 1: Generic specification \x96 General requirements and test methods | |
| Steel and iron \x96 Determination of phosphorus content \x96 Phosphovanadomolybda te spectrophotometric method (ISO/FDIS 10714:2024) | |
| Steel and iron \x96 Determination of titanium content \x96 Diantipyrylmethane spectrophotometric method (ISO/FDIS 10280:2025) | |
| Steel and iron \x96 Sampling and preparation of samples for the determination of chemical composition (ISO/FDIS 14284:2022) | |
| Sterilization of health care products \x96 Biological indicators \x96 Part 7: Guidance for the selection, use and interpretation of results (ISO/FDIS 11138-7:2018) | |
| Sterilization of health care products \x96 Microbiological methods \x96 Part 1: Determination of a population of microorganisms on products (ISO/FDIS 11737-1:2017) | |
| Sterilization of health care products \x96 Radiation \x96 Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO/FDIS 11137-3:2016) | |
| Sterilization of medical devices \x96 Microbiological methods \x96 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO/FDIS 11737-2:2019) | |
| Surgical and dental hand instruments \x96 Determination of resistance against autoclaving, corrosion and thermal exposure (ISO/FDIS 13402:2024) | |
| Switchgear and controlgear and their assemblies for low voltage \x96 Integration method of radiocommunication device into an equipment | |
| Technical product documentation \x96 General principles of representation \x96 Part 100: Index (ISO/FDIS 128-100:2020) | |
| Technical product documentation \x96 General principles of representation \x96 Part 2: Basic conventions for lines (ISO/FDIS 128-2:2020) | |
| Technical product documentation \x96 Vocabulary \x96 Terms relating to technical drawings, product definition and related documentation (ISO/FDIS 10209:2021) | |
| Terrestrial photovoltaic (PV) modules \x96 Quality system for PV module manufacturing | |
| Testing of valves \x96 Fire type-testing requirements (ISO/FDIS 10497:2022) | |
| Textiles - Oil repellency - Hydrocarbon resistance test (ISO/FDIS 14419:2009) | |
| Textiles \x96 Determination of fabric propensity to surface pilling, fuzzing or matting \x96 Part 1: Pilling box method (ISO/FDIS 12945-1:2020) | |
| Textiles \x96 Determination of the abrasion resistance of fabrics by the Martindale method \x96 Part 2: Determination of specimen breakdown (ISO/FDIS 12947-2:2016) | |
| Textiles \x96 Methods for determination of certain aromatic amines derived from azo colorants \x96 Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO/FDIS 14362-3:2016) | |
| Textiles \x96 Methods for determination of certain aromatic amines derived from azo colorants \x96 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the... | |
| Textiles \x96 Tests for colour fastness \x96 Part A03: Grey scale for assessing staining (ISO/FDIS 105-A03:2019) | |
| Textiles \x96 Tests for colour fastness \x96 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO/FDIS 105-B04:2023) | |
| Textiles \x96 Tests for colour fastness \x96 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO/FDIS 105-B06:2020) | |
| Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting \x96 Part 3: Random tumble pilling method (ISO/FDIS 12945-3:2020) | |
| Thermal bridges in building construction \x96 Heat flows and surface temperatures \x96 Detailed calculations (ISO/FDIS 10211:2016) | |
| Thermal bridges in building construction \x96 Linear thermal transmittance \x96 Simplified methods and default values (ISO/FDIS 14683:2016) | |
| Thermal insulation for building equipment and industrial installations \x96 Calculation rules (ISO/FDIS 12241:2022) | |
| Thermal performance of building components \x96 Dynamic thermal characteristics \x96 Calculation methods (ISO/FDIS 13786:2016) | |
| Thermal performance of buildings \x96 Heat transfer via the ground \x96 Calculation methods (ISO/FDIS 13370:2016) | |
| Thermal performance of buildings \x96 Transmission and ventilation heat transfer coefficients \x96 Calculation method (ISO/FDIS 13789:2016) | |
| Thermal performance of buildings and materials \x96 Determination of specific airflow rate in buildings \x96 Tracer gas dilution method (ISO/FDIS 12569:2017) | |
| Thermal performance of windows, doors and shutters \x96 Calculation of thermal transmittance \x96 Part 2: Numerical method for frames (ISO/FDIS 10077-2:2016) | |
| Thermal spraying \x96 Thermally sprayed coatings \x96 Symbolic representation on drawings (ISO/FDIS 12671:2020) | |
| Thermoplastics piping systems for non-pressure applications \x96 Test method for resistance to elevated temperature cycling (ISO/FDIS 13257:2018) | |
| Thermoplastics piping systems for underground non-pressure applications \x96 Test method for leaktightness of elastomeric sealing ring type joints (ISO/DIS 13259:2017) | |
| Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO/FDIS 12625-16:2014) | |
| Tissue paper and tissue products \x96 Part 17: Determination of disintegration in water (ISO/FDIS 12625-17:2020) | |
| Tissue paper and tissue products \x96 Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO/FDIS 12625-4:2016) | |
| Tissue paper and tissue products \x96 Part 5: Determination of wet tensile strength (ISO/FDIS 12625-5:2024) | |
| Tissue paper and tissue products \x96 Part 6: Determination of grammage (ISO/FDIS 12625-6:2016) | |
| Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO/FDIS 1135-4:2015) | |
| Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO/FDIS 1135-5:2015) | |
| Transportable gas cylinders \x96 Compatibility of cylinder and valve materials with gas contents \x96 Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO/FDIS 11114-4:2016) | |
| Unified reference model for smart manufacturing | |
| Water quality \x96 Determination of short-chain polychlorinated alkanes (SCCP) in water \x96 Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO/FDIS 12010:2018) | |
| Water quality \x96 Enumeration of Legionella (ISO/FDIS 11731:2016) | |
| Water quality \x96 Gamma-ray emitting radionuclides \x96 Test method using high resolution gamma-ray spectrometry (ISO/FDIS 10703:2021) | |
| Water quality \x96 Gross alpha and gross beta activity \x96 Test method using liquid scintillation counting (ISO/FDIS 11704:2018) | |
| Water quality \x96 Gross alpha and gross beta activity \x96 Test method using thin source deposit (ISO/FDIS 10704:2018) | |
| Water quality \x96 Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO/DIS 10634: 2017) | |
| Water quality \x96 Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum (ISO/FDIS 10253:2024) | |
| Water quality \x96 Requirements for establishing performance characteristics of quantitative microbiological methods (ISO/FDIS 13843:2017) | |
| Wearable electronic devices and technologies \x96 Part 101-1: Terminology | |
| Wearable electronic devices and technologies \x96 Part 201-1: Electronic textile \x96 Measurement methods for basic properties of conductive yarns | |
| Wearable electronic devices and technologies \x96 Part 201-2: Electronic textile \x96 Measurement methods for basic properties of conductive fabrics and insulation materials | |
| Wearable electronic devices and technologies \x96 Part 204-1: Electronic textile \x96 Test method for assessing washing durability of e-textile products | |
| Wearable electronic devices and technologies \x96 Part 204-2: Electronic textile \x96 Test method to characterize electrical resistance change in knee and elbow bending test of e-textiles | |
| Wearable electronic devices and technologies \x96 Part 402-1: Performance measurement of fitness wearables \x96 Test methods of glove-type motion sensors for measuring finger movements | |
| Wearable electronic devices and technologies \x96 Part 402-2: Performance measurement of fitness wearables \x96 Step counting | |
| Wearable electronic devices and technologies \x96 Part 801-1: Smart Body Area Network (SmartBAN) \x96 Enhanced Ultra-Low Power Physical Layer | |
| Wearable electronic devices and technologies \x96 Part 801-2: Smart Body Area Network (SmartBAN) \x96 Low Complexity Medium Access Control (MAC) for SmartBAN | |
| Welding \x96 Arc-welded joints in aluminium and its alloys \x96 Quality levels for imperfections (ISO/FDIS 10042:2018) | |
| Welding \x96 Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO/FDIS 13916:2025) | |
| Welding \x96 Studs and ceramic ferrules for arc stud welding (ISO/FDIS 13918:2017) | |
| Welding consumables - Procurement of filler materials and fluxes (ISO/FDIS 14344:2009) | |
| Welding consumables \x96 Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels \x96 Classification (ISO/FDIS 14343:2016) | |
| Wireless Power Transfer (WPT) Glossary of Terms (TA 15) |
| << Prev | Next >> |