Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
560
570
580
590
600
610
617
618
619
620
621
622
623
624
625
626
627
628
629
630
640
650
660
670
680
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| ADJUSTABLE GAP FRAME PRESSES | |
| Aluminum Drill Pipe Inspection | |
| Analysis of Foods for Benzene | |
| ANALYSIS OF THE OFFSHORE AND COASTAL DISPERSION (OCD) MODEL (VERSION 2) FOR AIR POLLUTION COMPUTATIONS | |
| API Mineral Oil Review | |
| Applying the Revised Toxicity Characteristic to the Petroleum Industry | |
| Arena-Related Defects | |
| Assessment Guide for Refinery Wastewater Impoundment Impacts on Ground Water | |
| ASSESSMENT OF PETROLEUM INDUSTRY COST OF COMPLIANCE WITH PROPOSED HAZARDOUS WASTE REGULATIONS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM ATTENUATORS, FIXED AND VARIABLE | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM BASIC | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM CABLE ASSEMBLIES | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM CONNECTOR ACCESSORIES | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM CONTAINERS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM CONVERTERS AND INVERTERS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM DUMMY LOADS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM FANS AND IMPELLERS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM LAMPHOLDERS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM MOTORS, AC AND DC | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM OSCILLATORS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM RELAYS | |
| AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TRANSFORMERS | |
| Basis for Structural Design | |
| BEARING, ROLLER, TAPERED, SINGLE ROW OF ROLLERS (METRIC SERIES) | |
| Biological Research On The Effects Of Undispersed And Dispersed Experimental Crude Oil Slicks In The New York Bight | |
| Bit Inspection Technical Standard | |
| BOLSTER PLATE & SLIDE ACCESSORIES | |
| Calculation of heat loss from buildings | |
| Characterization of Exploration and Production Associated Waste | |
| CLAMP ASSEMBLY, CUSHIONED SADDLE, METRIC (SAE MA 14298) | |
| CLAMP, LOOP, CUSHIONED, ELONGATED, METRIC | |
| CLAMP, LOOP, CUSHIONED, RECTANGULAR, METRIC | |
| CLAMP, LOOP, METAL, PLAIN, SUPPORT, AIRCRAFT, METRIC | |
| CLAMP, LOOP, NYLON, METRIC | |
| CLAMP, LOOP, PLASTIC, WIRE SUPPORT, METRIC | |
| CLAMP, LOOP, PLASTIC, WIRE SUPPORT, RIBBED INNER DIAMETER, METRIC | |
| CLAMP, LOOP, TYPE, BONDING, METRIC | |
| CLASSIFIED COMPUTER SECURITY PROGRAM | |
| Code of Practice for foundation engineering | |
| Code of Practice for Loads for the Design of Structures | |
| Code of Practice for the Safety of Structures | |
| Code of Practice for the structural use of steel | |
| Code of Practice for the structural use of timber | |
| Component Identification Training and Reference Guide | |
| Component Identification | |
| Concrete \x96 Materials \x96 Rules for application of EN 206-1 in Denmark | |
| Concrete \x96 Specification, performance, production and conformity \x96 Rules for application of EN 206 in Denmark | |
| Concrete execution \x96 Rules for application of EN 13670 in Denmark | |
| Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced - Supplement to DS/EN 1917 | |
| Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced \x96 Supplement to DS/EN 1917 \x96 Amendment 1 | |
| Concrete pipes and fittings, unreinforced, steel fibre and reinforced - Supplement to DS/EN 1916 | |
| Concrete pipes and fittings, unreinforced, steel fibre and reinforced \x96 Supplement to DS/EN 1916 \x96 Amendment 1 | |
| CONFIGURATION CONTROL - ENGINEERING CHANGES, DEVIATIONS AND WAIVERS | |
| Contraction-Related Defects | |
| CONTROL AND ACCOUNTABILITY OF NUCLEAR MATERIALS (CONSOLIDATES DOE 5633.2, 5633.4, 5633.5) | |
| COST ESTIMATING, ANALYSIS, AND STANDARDIZATION | |
| Dansk Ingeni\xf8rforenings norm for last p\xe5 b\xe6rende konstruktioner 1 \x96 Last | |
| DATA ITEM DESCRIPTIONS (DIDS) | |
| Deep Reinforcement Learning Hands-On | |
| DESCRIPTION AND COMPARISON OF EPA AND RADIAN EVAPORATIVE EMISSIONS MODEL | |
| Design and Planning Manual for Cost-Effective Welding | |
| Design Phase Commissioning Handbook CD | |
| Design Phase Commissioning Handbook | |
| DETERMINATION OF EMISSIONS FROM RETAIL GASOLINE OUTLETS USING OPTICAL REMOTE SENSING: PILOT FIELD STUDY AT A NON-VAPOR RECOVERY SITE - PROJECT SUMMARY REPORT - VOLUME I | |
| Development of a Diluting Concentration method for Testing the Acute Toxicity of Chemically Dispersed Oil, and the Results of Comparative studies | |
| Development of a Leaching Test for Petroleum Wastes | |
| Development of Improved Methods to Measure Effective Doses of Ozone | |
| Dimensioning of the outlet connection/coupling for gas cylinder valves for cylinder pressure < 250 bar \x96 exclusive LPG | |
| Distribution and Behavior of Drilling Fluids and Cuttings Around Gulf of Mexico Drilling Sites | |
| DOCUMENTATION OF THE BASIS FOR SELECTION OF THE CONTENTS OF CHAPTER 2 - CHARACTERIZATION OF HYDROCARBONS IN TECHNICAL DATA BOOK - PETROLEUM REFINING | |
| DOCUMENTATION OF THE BASIS FOR SELECTION OF THE CONTENTS OF CHAPTER 3 - ASTM DISTILLATION, TRUE BOILING POINT DISTILLATION, AND EQUILIBRIUM FLASH VAPORIZATION RELATIONSHIPS FOR PETROLEUM FRACTIONS IN "TECHNICAL DATA... | |
| DOCUMENTATION OF THE BASIS FOR SELECTION OF THE CONTENTS OF CHAPTER 3- PETROLEUM FRACTION DISTILLATION INTERCONVERSIONS | |
| DOCUMENTATION OF THE BASIS FOR SELECTION OF THE CONTENTS OF CHAPTER 5 - VAPOR PRESSURE IN "TECHNICAL DATA BOOK - PETROLEUM REFINING" | |
| DOCUMENTATION OF THE BASIS FOR SELECTION OF THE CONTENTS OF CHAPTER 7 - THERMAL PROPERTIES IN "TECHNICAL DATA BOOK - PETROLEUM REFINING" | |
| DOD AUTOMATED INFORMATION SYSTEMS (AIS) DOCUMENTATION STANDARDS | |
| DOE HEPA FILTER TEST PROGRAM | |
| DOUBLE ACTION - SINGLE & MULTIPLE POINT PRESSES | |
| Double-Capped Fluorescent Lamps - Safety Specifications First Edition; (CENELEC EN 61195:1994) | |
| DRAFT ASME CODE FOR PUMPS AND VALVES FOR NUCLEAR POWER | |
| Drawing Requirements Manual | |
| Drill Stem Design and Operation | |
| Drill Stem Inspection | |
| Drilling Guidelines for Printed Boards | |
| Drilling Specialty Tools | |
| Drilling Tubular Product Specification | |
| DRIVERS APPLICATION GUIDEBOOK: ELECTRIC MOTORS | |
| Drug-Induced Liver Disease | |
| Drupal 7 Development by Example Beginner\x92s Guide | |
| Drupal 8 Development Cookbook | |
| Drupal 8 Module Development | |
| Ecological Effects of Produced Water Discharges from Offshore Oil and Gas Production Platforms | |
| ENVIRONMENTAL PROTECTION, SAFETY, AND HEALTH PROTECTION STANDARDS (CHG NOT 1-3 INCORP) | |
| Estimation of Incremental Bbenzene Exposure Associated with Seven Bulk Gasoline Storage Facilities in North Carolina | |
| Final Report Interlaboratory Testing: Acute Toxicity Bioassay Method for Chemically-Dispersed Oils | |
| FINANCIAL ASSISTANCE PROCEDURES MANUAL | |
| Fire Classification of structuores | |
| Fire protection - Fire extinguishers - Pressure testing, inspection and recharging | |
| Fire resistance of building constructions - Classification | |
| Fire resistance of doors - Classification | |
| Fire-resistance tests - Door and shutter assemblies | |
| Gas-Related Defects | |
| GENERAL DESIGN CRITERIA | |
| General Specification for 1/8 Inch Diameter Shank Carbide Drills for Printed Boards | |
| Global Emissions of Carbon Dioxide from Petroleum Sources | |
| Global Emissions of Methane from Petroleum Sources | |
| Graphic symbols \x96 Pictograms for information of the public \x96 Part 1: Prohibitions, instructions, etc. | |
| Group 100 \x96 Prohibitions and recommendations \x96 Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| Group 200 \x96 Directions \x96 Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| Group 300 \x96 Instructions \x96 Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| Group 400 \x96 Facilities \x96 Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| Group 500 \x96 Features \x96 Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| Group 600 \x96 Service \x96 Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| GUIDANCE FOR PREPARATION OF DOE 5480.22 (TSR) AND DOE 5480.23 (SAR) IMPLEMENTATION PLANS | |
| Guide to Good Practices for Equipment and Piping Labeling | |
| Guide to Good Practices for Lockouts and Tagouts | |
| GUIDELINE TO GOOD PRACTICES FOR MATERIAL RECEIPT, INSPECTION, HANDLING, STORAGE, RETRIEVAL, AND ISSUANCE AT DOE NUCLEAR FACILITIES | |
| HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH DOE ORDER 5480.23, NUCLEAR SAFETY ANALYSIS REPORTS | |
| Heat pumps with electrically driven compressors \x96 Execution of small installations with a heat input not exceeding 25 kW | |
| HINGE, CONTINUOUS, METRIC | |
| HOISTING AND RIGGING (FORMERLY HOISTING AND RIGGING MANUAL) | |
| Identification of Oils that Produce Non-Buoyant in Situ Burning Residues and Methods for Their Recovery | |
| Identification of Organic Toxicants in Treated Refinery Effluents | |
| Identification, Comparison and Evaluation of Existing Freshwater, Estuarine, and Marine Rapid Chronic Bioassays | |
| IMPLEMENTATION GUIDE FOR QUALITY ASSURANCE PROGRAMS FOR BASIC AND APPLIED RESEARCH | |
| In Situ Groundwater Mitigation of Hydrocarbon Contamination Using Colloidal Gas Aphrons | |
| Infection control in the health care sector - Part 10: Requirements for cleaning | |
| Infection control in the health care sector - Part 13: Requirements for reprocessing of reusable medical equipment | |
| Infection control in the health care sector - Part 13: Requirements for reprocessing of sterilizable medical equipment | |
| Infection control in the health care sector - Part 2: Requirements for hand hygiene | |
| Infection control in the health care sector - Part 5: Requirements for prevention of surgical site infections | |
| Infection control in the health care sector - Part 6: Requirements for urinary tract catheters and other urine incontinence devices | |
| Inks for permanent black writings | |
| INTERIM REPORT ON NEW EMISSION FACTORS FOR ONSHORE OIL AND GAS FACILITIES DEVELOPED THROUGH A RE-EXAMINATION OF THE ROCKWELL FIELD DATA VOLUME 1 | |
| INTERIM REPORT ON NEW EMISSION FACTORS FOR ONSHORE OIL AND GAS FACILITIES DEVELOPED THROUGH A RE-EXAMINATION OF THE ROCKWELL FIELD DATA VOLUME II | |
| Introduction to Electronics Assembly | |
| IPC 7912A/9261A End Item and In-Process DPMO SET | |
| Laboratory Scale Gasoline Spill and Venting Experiment | |
| Lifting eye bolts | |
| Literature Review on the Effects of Oil and Oil Dispersants on Fishes | |
| Measurement of buildings, concepts of area and volume \x96 CORRECTIONS 1 | |
| Measurement of buildings, concepts of area and volume | |
| MECHANICAL STAMPING PRESSES | |
| Metalpr\xf8vning. Tr\xe6kpr\xf8vning | |
| Metric linear basic sizes for engineering | |
| Modeling Oxygen-Transport Limited Biodegradation in Three-Dimensionally Heterogeneous Aquifers | |
| Natural Phenomema Hazards Analysis and Design Criteria for DOE Facilities | |
| Natural Phenomena - Hazards Design and Evaluation Criteria for Department of the Energy Facilities | |
| Natural Phenomena Hazards Design and Evaluation Criteria for Department of Energy Facilities | |
| Natural Phenomena Hazards Performance Categorization Guidelines for Structures, Systems, And Components | |
| Novel Techniques for the Containment of Oil in Flowing Water | |
| Oil Spill Studies: Measurement of Environmental Effects and Recovery | |
| OPEN BACK INCLINABLE PRESSES | |
| Overview of Research Relating to Population Exposure to Air Pollution | |
| Oxide-Related Defects | |
| PACKING, PREFORMED, TUBE-FITTING, METRIC | |
| PCB Design Desk Reference | |
| PERSONNEL SELECTION, QUALIFICATION, AND TRAINING REQUIREMENTS FOR DOE NUCLEAR FACILITIES | |
| Pictograms from DS 2301-1:2017 \x96 Pictograms in electronic formats | |
| Pilot Study in Los Angeles to Measure Personal Ozone Exposures During Scripted Activities | |
| Pin Hinge, Metric | |
| PIN, HINGE, METRIC | |
| Pistol, Caliber .45, Automatic, M1911A1 | |
| PISTOL, CALIBER .45, AUTOMATIC: M11911A1 | |
| PLUG, EXPANSION, TAPERED METRIC | |
| Polynuclear Hydrocarbons in Sediments and Clams in the Vicinity of a Refinery outfall | |
| Potential BTEX Emissions from the Nation's Triethylene Glycol Units in Oil and Natural Gas Facilities | |
| PRESSROOM SAFETY ACCESSORIES DESIGN AND REFERENCE DATA | |
| PRESSROOM SAFETY ACCESSORIES | |
| PROCEEDINGS: SAMPLING AND ANALYTICAL METHODS FOR DETERMINING PETROLEUM HYDROCARBONS IN GROUNDWATER AND SOIL | |
| Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity | |
| Program Plan for Validated, Complex Terrain Atmospheric Dispersion Models for the Oil Shale Region of Colorado and Utah | |
| QUALITY ASSURANCE | |
| Railway safety management systems - Work related to infrastructure - Requirements | |
| Railway safety management systems \x96 Work related to infrastructure \x96 Guidance \x96 CORRECTIONS 1 | |
| Railway safety management systems \x96 Work related to infrastructure \x96 Guidance | |
| Railway safety management systems \x96 Work related to infrastructure \x96 Requirements \x96 CORRECTIONS 1 | |
| Railway safety management systems \x96 Work related to infrastructure \x96 Requirements for bodies providing audit and certification of railway safety management systems | |
| RAMP, LOADING VEHICLE (DOCKBOARD), COUNTERBALANCED, MECHANICAL, ADJUSTABLE, 20,000 POUND CAPACITY | |
| Remediation of a Fractured Clay Till Using Air Flushing: Field Experiments at Sarnia, Ontario | |
| Removal of Benzene from Refinery Wastewater | |
| Representative sampling \x96 Horizontal standard | |
| Requirements for management systems in the health sector - Part 1: Risk management and infection control | |
| Requirements for security of cash centers, transit stations and cash transport | |
| Review and Evaluation of Research Relating to Population Exposure to Air Pollution | |
| Review of EPA's Proposed Flare Plume Rise Procedure | |
| Review of Revisions to the Offshore and Coastal Dispersion (OCD) Model | |
| Revolver, Caliber .38 Special, Double Action, 5 Shot and 6 Shot, Commercial and Military; General Specification for | |
| Revolver, Caliber .38 Special, Double Action, 5 Shot and 6 Shot, Commercial | |
| Revolver, Caliber .38 Special, Double Action, 5 Shot and 6 Shot, Military | |
| REVOLVER, CALIBER .38 SPECIAL, DOUBLE-ACTION, 5 SHOT AND 6 SHOT, COMMERCIAL AND MILITARY: GENERAL SPECIFICATION FOR | |
| REVOLVER, CALIBER .38 SPECIAL, DOUBLE-ACTION, 5 SHOT AND 6 SHOT, COMMERCIAL | |
| REVOLVER, CALIBER .38 SPECIAL, DOUBLE-ACTION, 5 SHOT AND 6 SHOT, MILITARY | |
| SCIENTIFIC AND TECHNICAL INFORMATION MANAGEMENT | |
| Sediment Criteria Development: A Technical Critique | |
| SINGLE ACTION - MULTIPLE POINT RAIL OR FRAME PRESSES | |
| SINGLE ACTION - STRAIGHT SIDE SINGLE POINT PRESSES | |
| SINGLE ACTION MULTIPLE POINT PRESSES | |
| Skills levels for personnel responsible for the design, specification and execution of protection and repair of concrete structures in Denmark according to DS/EN 1504-9 | |
| Stairs - Vocabulary | |
| STRAP, RETAINING, CUSHIONED, RECTANGULAR, METRIC | |
| STRAP, RETAINING, CUSHIONED, RECTANGULAR, TWO PIECE METRIC | |
| Structural appraisal of existing constructions | |
| Surface Mount Solder Evaluation Training & Reference Guide | |
| Surface Mount Solder Joint Evaluation Training & Reference Guide | |
| Surface Mount Solder Joint Evaluation | |
| TAPE, ADHESIVE, RUBBER (METRIC) | |
| TELECOMMUNICATIONS: COMMUNICATIONS SECURITY | |
| TEREPHTHALIC ACID, TECHNICAL (METRIC) | |
| TERMINAL BOARDS AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM | |
| TEST KIT, WATER, ENGINE COOLING SYSTEMS (METRIC) | |
| TEST REQUIREMENTS DOCUMENT, PREPARATION OF | |
| The EPACML Model: Analysis of Critical Components and Finite Source Methodology | |
| The York River: A Brief Review of its Physical, Chemical and Biological Characteristics | |
| Through-Hole Solder Evaluation Training & Reference Guide | |
| Through-Hole Solder Joint Evaluation Desk Reference Manual | |
| Through-Hole Solder Joint Evaluation Training & Reference Guide | |
| THUMBSCREW, WING HEAD, METRIC, GENERAL SPECIFICATION FOR (METRIC) | |
| THUMBSCREW, WING HEAD, METRIC | |
| Toxicity Bioassays on Dispersed Oil in the North Sea: June 1996 Field Trials | |
| Tracer Charge and Igniter Composition for 120MM Cartridges | |
| TRAINING DEVICES PHOTOGRAPHY REQUIREMENTS; GENERAL SPECIFICATION FOR | |
| TRANSFORMER, POWER, 7 VOLTAMPERES, TF5S03ZZ, METRIC | |
| TRANSFORMER, POWER, STEP-DOWN, THREE PHASE, 50 HZ, TF5S03ZZ, METRIC | |
| TRANSFORMERS AND INDUCTORS (AUDIO, POWER AND HIGH-POWER PULSE), INDUCTOR, POWER (9.6 VA), TF5S04ZZ, METRIC | |
| TRIPLE ACTION MULTIPLE POINT PRESSES | |
| TRIS-1-(2 METHYL AZIRIDINYL) PHOSPHINE OXIDE | |
| U.S. CRUDE AND PRODUCTS IMPORT | |
| Udf\xf8relse af b\xe6rende konstruktioner \x96 Almen kontrol | |
| UNCLASSIFIED COMPUTER SECURITY PROGRAM | |
| UREA, TECHNICAL (METRIC) | |
| VALVE ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) | |
| VALVES, BOILER BLOW SERVICE, MONEL, SHIPBOARD USE | |
| VARNISH (MIXING, PHENOLIC) (METRIC) | |
| WARHEAD, GUIDED MISSILE, HE, M207E6 TRUMPET LINER FOR | |
| Washable reusable community face coverings \x96 Requirements and test methods \x96 AMENDMENT 1 | |
| Washable reusable community face coverings \x96 Requirements and test methods | |
| Washable reusable community face coverings \x96Requirements and test methods | |
| WASHER, CONCAVE AND WASHER CONVEX (SPHERICAL SET), STEEL, METRIC | |
| WASHER, KEY, EXTERNAL, BRASS, METRIC | |
| WASHER, KEY, EXTERNAL, STEEL, METRIC | |
| WASHER, KEY, FLAT, LONG AND SHORT, BRASS, METRIC | |
| WASHER, KEY, FLAT, LONG AND SHORT, STEEL, METRIC | |
| WASHER, KEY, FLAT, LONG, BRASS, METRIC | |
| WASHER, KEY, FLAT, LONG, STEEL, METRIC | |
| WASHER, KEY, INTERNAL, STEEL, METRIC | |
| WASHER, KEY, METRIC GENERAL SPECIFICATION FOR | |
| WASHER, LOCK FLAT, INTERNAL TOOTH (METRIC) | |
| WASHER, LOCK SPRING, HELICAL, LIGHT SERIES (METRIC) | |
| WASHER, LOCK SPRING, HELICAL, REGULAR SERIES (METRIC) | |
| WASHER, LOCK SPRING, HELICAL, REGULAR SERIES, (METRIC) | |
| WASHER, LOCK, FLAT, EXTERNAL TOOTH (METRIC) | |
| WASHER, LOCK, FLAT, INTERNAL TOOTH (METRIC) | |
| WASHER, SPRING TENSION, (BELLEVILLE SPRING), METRIC | |
| WASHER, SPRING TENSION, CURVED OR CRINKLE TYPE, (HIGH COMPRESSION), METRIC | |
| WASHER, SPRING TENSION, SERRATED (RIBBED) (BELLEVILLE SPRING), METRIC | |
| WASHERS, (METRIC) , GENERAL SPECIFICATION FOR | |
| WASHERS, SPRING TENSION, CYLINDRICALLY CURVED AND WAVED, METRIC | |
| WASHERS, SPRING TENSION, METRIC, GENERAL SPECIFICATION FOR | |
| Washers, Spring Tension, Serrated (Ribbed) (Belleville Spring), Metric | |
| Water analysis - Determination of ammonia-nitrogen | |
| WEAPON CALIBER AND AMMUNITION, METRIC SYSTEM FOR IDENTIFICATION OF | |
| WELDING MACHINE, ARC, DIRECT CURRENT, 300 AMPERE, VARIABLE VOLTAGE, TRANSFORMER RECTIFIER TYPE, DAMAGE CONTROL, LIGHT WEIGHT, PORTABLE (METRIC) | |
| Whitworth screw threads, 1/4...6 inches | |
| Wire Harness Assembly Training & Reference Guide | |
| Wire Preparation and Crimping Desk Reference Manual | |
| WIRING DATA AND SYSTEM SCHEMATIC DIAGRAMS PREPARATION OF | |
| WIRING HARNESS, SPACE VEHICLE, DESIGN AND TESTING, GENERAL SPECIFICATION FOR | |
| WORLD WIDE STANDARD FOR SINGLE AND MULTIPLE ACTION STRAIGHT SIDE PRESSES | |
| Zirconium Carbide, Powdered, Technical | |
| ZIRCONIUM CARBIDE, POWERED, TECHNICAL |
| << Prev | Next >> |