Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
200
250
300
350
400
450
500
510
520
530
540
550
554
555
556
557
558
559
560
561
562
563
564
565
566
570
580
590
600
610
620
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abgasanlagen - Keramik-Innenrohre - Teil 1: Innenrohre fuer Trockenbetrieb - Anforderungen und Pruefungen; Deutsche Fassung EN 1457-1:2012 | |
| Abgasanlagen - Keramik-Innenrohre - Teil 2: Innenrohre fuer Nassbetrieb - Anforderungen und Pruefungen; Deutsche Fassung EN 1457-2:2012 | |
| Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements | |
| Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature | |
| Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) | |
| Adhesives for floor coverings - Requirements for mechanical and electrical performance | |
| Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes | |
| Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) | |
| Adhesives for non-structural wood applications - Test method and requirements for resistance to static load | |
| Advanced technical ceramics - Terms, definitions and abbreviations; Trilingual version EN 14232:2009 | |
| Agglomerated stone - Terminology and classification | |
| Agglomerated stone - Test methods - Part 10: Determination of chemical resistance | |
| Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient | |
| Agglomerated stone - Test methods - Part 12: Determination of dimensional stability | |
| Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity | |
| Agglomerated stone - Test methods - Part 15: Determination of compressive strength | |
| Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles | |
| Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption | |
| Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance | |
| Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance | |
| Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance | |
| Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole) | |
| Agglomerated stone - Test methods - Part 9: Determination of impact resistance | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions; German and English version EN... | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods; German and English version EN... | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods | |
| Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis | |
| Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components | |
| Aluminium und Aluminiumlegierungen - Anforderungen an anodisierte Erzeugnisse, die in Kontakt mit Lebensmitteln kommen; Deutsche Fassung EN 14392:2007 | |
| Aluminium und Aluminiumlegierungen - Chemische Analyse - Probenahme von Metallschmelzen; Deutsche Fassung EN 14361:2004 | |
| Aluminium und Aluminiumlegierungen - Chemische Analyse - Probenahme von Metallschmelzen; Deutsche und Englische Fassung prEN 14361:2024 | |
| Aluminium und Aluminiumlegierungen - Schweissbare Walzerzeugnisse fuer Tanks fuer Lagerung und Transport von Gefahrgut; Deutsche Fassung EN 14286:2008 | |
| Artikel fuer Saeuglinge und Kleinkinder - Besteck und Geschirr - Sicherheitstechnisch e Anforderungen und Pruefungen; Deutsche Fassung EN 14372:2004, Berichtigungen zu DIN EN 14372:2004-11 | |
| Artikel fuer Saeuglinge und Kleinkinder - Besteck und Geschirr - Sicherheitstechnisch e Anforderungen und Pruefungen; Deutsche Fassung EN 14372:2004 | |
| Artikel fuer Saeuglinge und Kleinkinder - Besteck und Geschirr - Sicherheitstechnisch e Anforderungen und Pruefungen; Deutsche und Englische Fassung prEN 14372:2024 | |
| Atemschutzgeraete - Gasfilter und Kombinationsfilter - Anforderungen, Pruefung, Kennzeichnung; Deutsche Fassung EN 14387:2004+A1:2008 | |
| Auslegung und Herstellung standortgefertigter, stehender, zylindrischer Flachboden-Stahltank s fuer die Lagerung von tiefkalt verfluessigten Gasen bei Betriebstemperaturen zwischen 0 \xb0C und -165 \xb0C - Teil 1: Allgemeines; Deutsche Fassung EN... | |
| Auslegung und Herstellung standortgefertigter, stehender, zylindrischer Flachboden-Stahltank s fuer die Lagerung von tiefkalt verfluessigten Gasen bei Betriebstemperaturen zwischen 0 \xb0C und -165 \xb0C - Teil 4: Daemmung; Deutsche Fassung EN... | |
| Auslegung und Herstellung standortgefertigter, stehender, zylindrischer Flachboden-Tanksyste men fuer die Lagerung von tiefkalt verfluessigten Gasen bei Betriebstemperaturen zwischen 0 \xb0C und -196 \xb0C - Teil 4: Daemmung; Deutsche und Englische... | |
| Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers | |
| Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) | |
| Bahnanwendungen - Bremsen - Fachbegriffe; Dreisprachige Fassung EN 14478:2017 | |
| Bahnanwendungen - Verfahren zur Berechnung der Anhalte- und Verzoegerungsbremswe ge und der Feststellbremsung - Teil 2: Schrittweise Berechnungen fuer Zugverbaende oder Einzelfahrzeuge; Deutsche Fassung EN 14531-2:2015 | |
| Baths for domestic purposes (includes Amendment A1:2010) | |
| Bauakustik - Messung von Luftschall und Koerperschall von gebaeudetechnischen Anlagen im Pruefstand - Teil 1: Anwendungsregeln fuer Abwasserinstallation en; Deutsche Fassung EN 14366-1:2023 | |
| Berichtigungen zu DIN EN 1435:2002-09 | |
| Bidets - Functional requirements and test methods | |
| Bitumen and bituminous binders - Characterization of perceptible properties | |
| Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions, and determination of storage stability by sieving | |
| Bitumen and bituminous binders - Determination of softening point - Ring and ball method | |
| Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der Nadelpenetration; Deutsche Fassung EN 1426:2007 | |
| Bitumens and bituminous binders - Determination of the softening point - Ring and Ball method; German and English version prEN 1427:2024 | |
| Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification | |
| Blinds and shutters - Thermal and visual comfort - Test and calculation methods | |
| Brackets for eaves gutters - Requirements and testing | |
| Brazing - Guidance on the application of brazed joints | |
| Cathodic protection of complex structures | |
| Ceramic tiles - Definitions, classification, characteristics and marking | |
| Characterization of waste - Calculation of dry matter by determination of dry residue or water content | |
| Characterization of waste - Determination of hydrocarbon content by gravimetry | |
| Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition | |
| Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) | |
| Charakterisierung von Abfaellen - Halogen- und Schwefelgehalt - Sauerstoffverbrennun g in geschlossenen Systemen und Bestimmungsverfahren ; Deutsche Fassung EN 14582:2016 | |
| Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1) | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)... | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2,... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase... | |
| Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitativer Keimtraegerversuch zur Pruefung der mykobakteriziden oder tuberkuloziden Wirkung chemischer Desinfektionsmittel fuer Instrumente im humanmedizinischen Bereich - Pruefverfahren und Anforderungen (Phase 2 | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitativer Oberflaechenversuch zur Bestimmung der bakteriziden Wirkung chemischer Desinfektionsmittel und Antiseptika fuer den Veterinaerbereich auf nicht-poroesen Oberflaechen ohne mechanische Wirkung - Pruefverf | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitativer Suspensionsversuch zur Bestimmung der viruziden Wirkung im humanmedizinischen Bereich - Pruefverfahren und Anforderungen (Phase 2, Stufe 1); Deutsche und Englische Fassung prEN 14476:2024 | |
| Child care articles - Drinking equipment - Safety requirements and test methods | |
| Child use and care articles - Child seats for cycles - Safety requirements and test methods | |
| Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests | |
| Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests | |
| Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; Corrigenda to DIN EN 14375:2004-02 | |
| Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing | |
| Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners | |
| Chimneys - Freeze-thaw resistance test method for chimney products | |
| Chimneys - General requirements | |
| Chimneys - System chimneys with plastic flue liners - Requirements and test methods | |
| Clamp type coupling assemblies for LPG transfer hoses | |
| Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar | |
| Coal tar and pitch based binders and related products - Carbon binder pitch - Characteristics and test methods | |
| Coal tar and pitch based binders and related products - Coating tar - Characteristics and test methods | |
| Coal tar and pitch based binders and related products - Impregnating pitch - Characteristics and test methods | |
| Coal tar and pitch based binders and related products - Painting tar - Characteristics and test methods | |
| Coal tar and pitch based binders and related products - Refractory binders - Characteristics and test methods | |
| Coal tar and pitch based binders and related products - Road tars - Characteristics and test methods | |
| Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment; Corrigendum 1 to English version of DIN EN 14459:2008-02 | |
| Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment | |
| Copper and copper alloys - Electrolytically tinned strip | |
| Corrugated metal hose assemblies for pressure applications - Part 1: Requirements | |
| Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures | |
| Corrugated metal hose assemblies for pressure applications | |
| Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009) | |
| Cranes - Manually controlled load manipulators; German and English version prEN 14238:2024 | |
| Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) | |
| Cranes - Power driven winches and hoists - Part 2: Power driven hoists (includes Amendment A1:2009) | |
| Cranes - Safety - Tower cranes | |
| Cryogenic vessels - Large transportable non vacuum insulated vessels - Part 3: Operational requirements (includes Amendment 1:2005) | |
| Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Briquetting pitch - Characteristics and test methods | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 2:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 3:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 5:... | |
| Determination of the auto ignition temperature of gases and vapours | |
| Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method | |
| Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F | |
| Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G | |
| Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C | |
| Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A | |
| Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A | |
| Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B | |
| Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C | |
| Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B | |
| Domestic direct gas-fired tumble dryers of types B 22D and B 23D , of nominal heat input not exceeding 6 kW - Part 1: Safety | |
| Domestic direct gas-fired tumble dryers of types B 22D and B 23D , of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy | |
| Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification | |
| Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement | |
| Duengemittel und Calcium-/Magnesium-B odenverbesserungsmit tel - Bestimmung von Kohlenstoffdioxid - Teil 1: Verfahren fuer feste Duengemittel; Deutsche Fassung EN 14397-1:2010 | |
| Duenne Asphaltschicht in Kaltbauweise - Werkseigene Produktionskontrolle ; Deutsche Fassung prEN 14440:2002 | |
| Duschabtrennungen - Funktionsanforderung en und Pruefverfahren | |
| Duschwannen fuer den Hausgebrauch; Deutsche Fassung EN 14527:2006+A1:2010 | |
| Emissionen aus stationaeren Quellen - Bestimmung der Gesamtemission von As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl und V; Deutsche Fassung EN 14385:2024 | |
| Entwaesserungsrinnen fuer Verkehrsflaechen - Klassifizierung, Bau- und Pruefgrundsaetze, Kennzeichnung und Beurteilung der Konformitaet; Deutsche Fassung EN 1433:2002 + AC:2004 + A1:2005 | |
| Equipping of LPG tanks overground and underground | |
| Erzeugnisse aus pflanzlichen und tierischen Fetten und Oelen - Fettsaeure-Methylest er (FAME) - Bestimmung des Ca-, K-, Mg- und Na-Gehaltes durch optische Emissionsspektralana lyse mit induktiv gekoppeltem Plasma (ICP OES); | |
| Execution of special geotechnical works - Reinforced fill Corrigendum 1 to English version of DIN EN 14475:2006-04 | |
| Execution of special geotechnical works - Reinforced fill | |
| Execution of special geotechnical works - Soil nailing | |
| Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar-explosion proof ventilation structure | |
| Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers | |
| Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers | |
| Explosion resistant equipment | |
| Explosion suppression systems | |
| Fahrzeuge der Binnenschifffahrt - Schwimmende Anlegestellen - Anforderungen, Pruefungen; Deutsche Fassung EN 14504:2009 | |
| Fenster und Tueren - Produktnorm, Leistungseigenschaft en - Teil 1: Fenster und Aussentueren ohne Eigenschaften bezueglich Feuerschutz und/oder Rauchdichtheit; Deutsche Fassung EN 14351-1:2006+A1:2010 | |
| Fenster und Tueren - Produktnorm, Leistungseigenschaft en - Teil 2: Innentueren; Deutsche Fassung EN 14351-2:2018 | |
| Fernwaermerohre - Werkmaessig gedaemmte Verbundmantelrohrsys teme fuer erdverlegte Fernwaermenetze - Ueberwachungssysteme ; Deutsche und Englische Fassung EN 14419:2009 | |
| Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials | |
| Feste Biobrennstoffe - Terminologie, Definitionen und Beschreibungen; Deutsche Fassung EN 14588:2010 | |
| Festlegungen fuer Fluessiggasgeraete - Terrassen-Schirmheiz geraete - Abzugslose Terrassenheizstrahle r zur Verwendung im Freien oder in gut beluefteten Raeumen; Deutsche Fassung EN 14543:2005+A1:2007 | |
| Feuerloeschpumpen - Tragkraftspritzen - Sicherheits- und Leistungsanforderung en, Pruefungen; Deutsche Fassung EN 14466:2005+A1:2008, Berichtigung zu DIN EN 14466:2008-09 | |
| Feuerloeschpumpen - Tragkraftspritzen - Sicherheits- und Leistungsanforderung en, Pruefungen; Deutsche Fassung EN 14466:2005+A1:2008 | |
| Feuerwiderstandsfaeh ige Lagerschraenke - Teil 1: Sicherheitsschraenke fuer brennbare Fluessigkeiten; Aenderung A100 | |
| Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification | |
| Fibre-cement pipelines - Guide for laying and on-site work practices; English version of DIN EN 1444 | |
| Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids | |
| Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders | |
| Fire test - Large-scale room reference test for surface products | |
| Fire-fighting hoses - Non-percolating layflat hoses for fixed systems (includes Amendment A1:2007) | |
| Fixed ladders for manholes | |
| Fluessige Mineraloelerzeugniss e - Trennung und Bestimmung von Fettsaeure-Methylest ern (FAME) aus Mitteldestillaten - Fluessigchromatograp hie (LC)/Gaschromatograp hie (GC); Deutsche Fassung EN 14331:2004 | |
| Fluessige Mineraloelerzeugniss e - Trennung und Bestimmung von Fettsaeure-Methylest ern (FAME) aus Mitteldestillaten - Fluessigchromatograp hie (LC)/Gaschromatograp hie (GC); Deutsche und Englische Fassung prEN 14331:2024 | |
| Fluessiggas-Geraete und Ausruestungsteile - Kontrollverfahren fuer ortsbewegliche, wiederbefuellbare Flaschen fuer Fluessiggas (LPG) vor, waehrend und nach dem Fuellen; Deutsche Fassung EN 1439:2008 | |
| Fluessiggas-Geraete und Ausruestungsteile - Ortsbewegliche, wiederbefuellbare, geschweisste Flaschen aus Stahl fuer Fluessiggas (LPG) - Gestaltung und Konstruktion; Deutsche Fassung EN 1442:2006+A1:2008 | |
| Fluessiggas-Geraete und Ausruestungsteile - Wiederkehrende Pruefung von ortsbeweglichen, wiederbefuellbaren Flaschen fuer Fluessiggas (LPG); Deutsche Fassung EN 1440:2008 | |
| Foam producing solutions for leak detection on gas installations | |
| Foodstuffs - Determination of 3-monochloropropane- 1,2-diol by GC/MS | |
| Foodstuffs - Determination of fumonisin B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean up | |
| Foodstuffs - Determination of saxitoxin and dc-saxitoxin in mussels - HPLC method using pre-column derivatization with peroxide or periodate oxidation | |
| Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC method using pre-column derivatization with peroxide or periodate oxidation; German and English version prEN 14526:2024 | |
| Foodstuffs - Determination of trace elements - Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion | |
| Foodstuffs - Determination of trace elements - Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing | |
| Foodstuffs - Microbiological screening for irradiated food using LAL/GNB procedures | |
| Footwear - Test methods for the assessment of ecological criteria | |
| Furnierschichtholz (LVL) - Definitionen, Klassifizierung und Spezifikationen; Deutsche Fassung EN 14279:2004+A1:2009 | |
| Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar); German and English version EN 14382:2019 | |
| Gas-fired insets for heating more than one room | |
| Gas-loaded accumulators for fluid power applications | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 1: Stapler mit veraenderlicher Reichweite; Deutsche Fassung EN 1459-1:2017 | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 1: Stapler mit veraenderlicher Reichweite; Deutsche und Englische Fassung prEN 1459-1:2023 | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 2: Schwenkbare Stapler mit veraenderlicher Reichweite; Deutsche Fassung EN 1459-2:2015 | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 4: Zusaetzliche Anforderungen fuer Stapler mit veraenderlicher Reichweite zum Befoerdern angehaengter Lasten; Deutsche Fassung EN 1459-4:2020 | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 4: Zusaetzliche Anforderungen fuer Stapler mit veraenderlicher Reichweite zum Befoerdern angehaengter Lasten; Deutsche und Englische Fassung EN 1459-4:2020/prA1:202 3 | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 7: Elektrifizierung; Deutsche und Englische Fassung prEN 1459-7:2025 | |
| Gelaendegaengige Stapler - Sicherheitstechnisch e Anforderungen und Verifizierung - Teil 9: Anforderungen an Stapler mit veraenderlicher Reichweite mit Arbeitsbuehnen, deren Frontschutzbuegel geoeffnet werden koennen; Deutsche Fassung EN 1459-9:2021 | |
| General requirements for components specifically designed for use in trenchless construction of drains and sewers | |
| Geosynthetic barriers - Screening test method for determining the resistance to oxidation | |
| Geosynthetic barriers - Test method for determining the resistance to leaching | |
| Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics | |
| Geosynthetics - Screening test method for determining chemical resistance for landfill applications | |
| Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking | |
| Gipselemente fuer Unterdecken (abgehaengte Decken) - Begriffe, Anforderungen und Pruefverfahren; Deutsche Fassung EN 14246:2006, Berichtigungen zu DIN EN 14246:2006-09; Deutsche Fassung EN 14246:2006/AC:2007 | |
| Gipselemente fuer Unterdecken (abgehaengte Decken) - Begriffe, Anforderungen und Pruefverfahren; Deutsche Fassung EN 14246:2006 | |
| Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods | |
| Health informatics - A syntax to represent the content of medical classification systems - ClaML; English version EN 14463:2007 | |
| Heat meters - Part 1: General requirements | |
| Heat meters - Part 2: Constructional requirements Corrigendum 1 to English version of DIN EN 1434-2:2007-05 | |
| Heat meters - Part 2: Constructional requirements | |
| Heat meters - Part 3: Data exchange and interfaces; English version EN 1434-3:2008 | |
| Heat meters - Part 4: Pattern approval tests | |
| Heat meters - Part 5: Initial verification tests | |
| Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 \xb0C | |
| Heating systems in buildings - Design and installation of direct electrical room heating systems | |
| Heizungsanlagen in Gebaeuden - Installation und Abnahme der Warmwasser-Heizungsa nlagen; Deutsche Fassung EN 14336:2004 | |
| Heizungsanlagen und wassergefuehrte Kuehlanlagen in Gebaeuden - Installation und Abnahme der Warmwasser-Heizungsa nlagen; Deutsche und Englische Fassung prEN 14336:2024 | |
| High Performance Helmets for Equestrian Activities | |
| High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload | |
| High-strength structural bolting assemblies for preloading - Part 1: General requirements | |
| High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading | |
| High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 5: Plain washers | |
| High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers | |
| High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies | |
| Hilfs- und Zusatzprofile aus Metall zur Verwendung mit Gipsplatten - Begriffe, Anforderungen und Pruefverfahren; Deutsche Fassung EN 14353:2007+A1:2010 | |
| Hochfeste planmaessig vorspannbare Schraubenverbindunge n fuer den Metallbau - Teil 7: System HR - Garnituren aus Senkschrauben und Muttern; Deutsche Fassung EN 14399-7:2007 | |
| Hochfeste planmaessig vorspannbare Schraubenverbindunge n fuer den Metallbau - Teil 8: System HV - Garnituren aus Sechskant-Passschrau ben und Muttern; Deutsche Fassung EN 14399-8:2007 | |
| Hochleistungskeramik - Pruefverfahren zur Bestimmung der Bruchzaehigkeit von monolithischer Keramik - Teil 3: Verfahren fuer Biegeproben mit Chevron-Kerb (CNB-Verfahren); Deutsche Fassung EN 14425-3:2010 | |
| Holzbauwerke - Nicht stiftfoermige Verbindungselemente - Anforderungen; Deutsche Fassung EN 14545:2008 | |
| Holzbauwerke - Stiftfoermige Verbindungsmittel - Anforderungen; Deutsche Fassung EN 14592:2008 | |
| Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing (includes Amendment A1:2007) | |
| Hose fittings with clamp units - Part 2: Hose side parts of hose tail | |
| Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned | |
| Hose fittings with clamp units - Part 4: Flange connections (includes Amendment A1:2007) | |
| Hose fittings with clamp units - Part 5: Threaded connections | |
| Hose fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007) | |
| Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007) | |
| Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007) | |
| Hose fittings with screwed ferrules | |
| In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans | |
| Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance | |
| Industrial valves - Steel check valves | |
| Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method | |
| Inland navigation vessels - Harbours for inland navigation | |
| Inland navigation vessels - Installation of berths and loading areas | |
| Inland navigation vessels - Studless anchor chain - Accessories | |
| Inland navigation vessels - Studless anchor chain - Round steel link chain | |
| Innen- und Aussenbekleidungen aus massivem Nadelholz - Profilholz mit Nut und Feder; Deutsche Fassung EN 14519:2005 | |
| Innen- und Aussenbekleidungen aus massivem Nadelholz - Profilholz mit Nut und Feder; Deutsche und Englische Fassung prEN 14519:2025 | |
| Inspection and testing of LPG road tankers | |
| Irrigation techniques - Irrigation hydrants; Corrigendum 1 to English version of DIN EN 14267:2004-10 | |
| Irrigation techniques - Irrigation hydrants | |
| Irrigation techniques - Meters for irrigation water Corrigendum to English version of DIN EN 14268:2005-11 | |
| Irrigation techniques - Meters for irrigation water | |
| Klebebaender - Messung der Bruchkraft und der Reissdehnung; Deutsche Fassung EN 14410:2003 | |
| Krane - Einrichtungen zum Heben von Personen - Teil 1: Haengende Personenaufnahmemitt el; Deutsche Fassung EN 14502-1:2010 | |
| Krane - Einrichtungen zum Heben von Personen - Teil 2: Hoehenverstellbare Steuerstaende; Deutsche Fassung EN 14502-2:2005+A1:2008 | |
| Kriminalpraevention im oeffentlichen Raum, in Gebaeuden und in Anlagen durch Gebaeudeplanung, Staedtebau und Instandhaltung - Teil 1: Begriffe; Dreisprachige Fassung EN 14383-1:2024 | |
| Kryo-Behaelter - Grosse ortsbewegliche, nicht vakuum-isolierte Behaelter - Teil 2: Bemessung, Herstellung, Ueberwachung und Pruefung; Deutsche Fassung EN 14398-2:2003+A2:2008 | |
| Kuenstlich hergestellter Stein - Pruefverfahren - Teil 2: Bestimmung der Biegefestigkeit (Schwenkbiegen); Deutsche Fassung EN 14617-2:2008 | |
| Kunststoff-Rohrleitu ngen und -Formstuecke - Verwendung von thermoplastischen Rezyklaten - Teil 1: Begriffe; Deutsche Fassung EN 14541-1:2022 | |
| Kunststoff-Rohrleitu ngssysteme - Bauteile aus glasfaserverstaerkte n duroplastischen Kunststoffen (GFK) - Pruefverfahren zur Bauartpruefung von geschraubten Flansch-Verbindungen (enthaelt Aenderung A1:1998); Deutsche Fassung EN 1450:1996 + A1:1998 | |
| Kunststoff-Rohrleitu ngssysteme fuer Abwasserleitungen und -kanaele mit oder ohne Druck - Glasfaserverstaerkte duroplastische Kunststoffe (GFK) auf der Basis von ungesaettigtem Polyesterharz (UP) - Festlegungen fuer Rohre, Formstuecke und Verbindungen; Deutsche... | |
| Kunststoff-Rohrleitu ngssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebaeudestruktur - Acrylnitril-Butadien -Styrol (ABS) - Teil 1: Anforderungen an Rohre, Formstuecke und das Rohrleitungssystem; Deutsche Fassung EN... | |
| Laboratory measurement of noise from waste water installations | |
| Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather | |
| Leather - Physical and mechanical tests - Determination of fogging characteristics | |
| Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame | |
| Leather - Physical and mechanical tests - Determination of water penetration pressure | |
| Leather - Physical and mechanical tests - Determination of water repellency of garment leather | |
| Luftkonditionierer, Fluessigkeitskuehlsa etze und Waermepumpen mit elektrisch angetriebenen Verdichtern fuer die Raumbeheizung und Kuehlung - Teil 3: Pruefverfahren; Deutsche Fassung EN 14511-3:2007, Berichtigung zu DIN EN 14511-3:2008-02; Deutsche Fassung EN... | |
| Luftkonditionierer, Fluessigkeitskuehlsa etze und Waermepumpen mit elektrisch angetriebenen Verdichtern fuer die Raumbeheizung und Kuehlung - Teil 4: Anforderungen; Deutsche Fassung EN 14511-4:2007 | |
| Materialien aus Altreifen - Teil 1: Allgemeine Definitionen in Zusammenhang mit den Verfahren zur Bestimmung der Abmessungen und Verunreinigungen; Deutsche Fassung EN 14243-1:2019 | |
| Materialien aus Altreifen - Teil 2: Granulate und Gummimehle - Verfahren zur Bestimmung der Korngroessenverteilu ng und Verunreinigungen, einschliesslich Gehalt an freiem Stahl und freiem Textil; Deutsche Fassung EN 14243-2:2019... | |
| Materialien aus Altreifen - Teil 3: Reifenschnitzel, Abschnitte und Chips - Verfahren zur Bestimmung der Abmessungen einschliesslich vorstehender Filamente; Deutsche Fassung EN 14243-3:2019 | |
| Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order... | |
| Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements | |
| Mechanische Befestigungsmittel fuer Gipsplattensysteme - Begriffe, Anforderungen und Pruefverfahren; Deutsche Fassung EN 14566:2008+A1:2009 | |
| Mechanische Schwingungen - Messung und rechnerische Ermittlung der Einwirkung von Ganzkoerper-Schwingu ngen auf den Menschen am Arbeitsplatz im Hinblick auf seine Gesundheit - Praxisgerechte Anleitung; Deutsche Fassung EN 14253:2003+A1:2007 | |
| Messung und Beurteilung von personenbezogenen Expositionen gegenueber inkohaerenter optischer Strahlung - Teil 3: Von der Sonne emittierte UV-Strahlung; Deutsche Fassung EN 14255-3:2008 | |
| Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method | |
| Natural stone test methods - Determination of linear thermal expansion coefficient | |
| Natural stone test methods - Determination of sound speed propagation | |
| Natural stone test methods - Determination of static elastic modulus | |
| Natural stone test methods - Determination of the slip resistance by means of the pendulum tester | |
| Non controllable backflow preventer with different pressure zones - Family C, type A | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 1: HPLC method with solid phase extraction clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 2: HPLC method with gel permeation chromatography clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 3: HPLC method with liquid/liquid-partit ion clean up | |
| Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources | |
| Packaging - Collapsible aluminium tubes - Tactile warnings of danger | |
| Packaging, Flexible packaging material - Determination of puncture resistance - Test methods | |
| Packaging, Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method | |
| Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant | |
| Performances of mobile leak detectors and of room controllers of halogenated refrigerants | |
| Persoenliche Schutzausruestung - Knieschutz fuer Arbeiten in kniender Haltung; Deutsche Fassung EN 14404:2004+A1:2010 | |
| Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 1: Test methods | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 2: Requirements for wearable knee protectors (type 1) | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 3: Requirements for the individual combination of knee pads and garments (type 2) | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 4: Requirements for the combination of interoperable knee pads and garments (type 2) | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 5: Requirements for knee mats (type 3) | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 6: Requirements for kneeling systems (type 4) | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials | |
| Pillar fire hydrants | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure | |
| Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading | |
| Plastics piping systems for renovation of underground gas supply networks - Part 1: General | |
| Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes | |
| Plastics piping systems for renovation of underground water supply networks - Part 1: General | |
| Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the systems | |
| Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the... | |
| Plywood - Calculation method for some mechanical properties | |
| Postal services - Digital postage marks - Applications, security and design | |
| Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail (includes Amendment A1:2007) | |
| Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail (includes Amendment A1:2007) | |
| Postalische Dienstleistungen - Behaelter fuer internationale Briefsendungen - Testmethoden und Anforderungen; Deutsche Fassung EN 14482:2010 | |
| Precast concrete products - Concrete with woodchips as aggregate - Requirements and test methods | |
| Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability | |
| Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles | |
| Products used for treatment of water intended for human consumption - Bone charcoal | |
| Products used for treatment of water intended for human consumption - Iron coated granular activated alumina | |
| Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone | |
| Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types... | |
| Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets | |
| Pruefung von Spritzbeton - Teil 3: Biegefestigkeiten (Erstriss-, Biegezug- und Restfestigkeit) von faserverstaerkten balkenfoermigen Betonpruefkoerpern; Deutsche Fassung EN 14488-3:2006 | |
| Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements | |
| Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements | |
| Railway applications - Infrastructure - Flash butt welding of rails - Part 3: Welding in association with crossing construction; German and English version prEN 14587-3:2025 | |
| Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles | |
| Railway applications - Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 1: General algorithms | |
| Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles - Part 3: Stationary tests not obligatory on a European level; German and English version... | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles - Part 4: On-track testing; German and English version prEN 14363-4:2025 | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles - Part 5: Calculations/Simulat ions; German and English version prEN 14363-5:2025 | |
| Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network - Part 2: Safety against derailment on twisted track; | |
| Railway applications - Testing and simulation for the assessment of running characteristics of rail vehicles operated on the heavy rail network - Part 1: General; German and English version prEN... | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests | |
| Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant | |
| Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a... | |
| Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction | |
| Railways applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification | |
| Rauchwarnmelder; Deutsche Fassung EN 14604:2005; Berichtigung 1 | |
| Rauchwarnmelder; Deutsche Fassung EN 14604:2005 | |
| Recreational diving services - Requirements for recreational scuba diving service providers | |
| Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1 | |
| Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2 | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements | |
| Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification | |
| Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer | |
| Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking | |
| Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking | |
| Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking | |
| Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector | |
| Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections | |
| Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen | |
| Respiratory protective devices - Particle filters - Requirements, testing, marking (includes Corrigendum AC:2005 + Amendment A1:2006) | |
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking | |
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only | |
| Rigid plastics containers - Methods to test the effectiveness of closures | |
| Road marking materials - Premix glass beads (includes Amendment A1:2003) | |
| Road marking materials - Road marking performance for road users (includes Amendment A1:2008) | |
| Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics | |
| Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustic characteristics | |
| Road traffic noise reducing devices - Procedures for assessing long term performance | |
| Road traffic noise reducing devices - Specifications | |
| Roller sports equipment - Kick scooters - Safety requirements and test methods | |
| Rotary positive displacement pumps - Performance tests for acceptance; Corrigendum 1 to English version of DIN EN 14343:2006-11 | |
| Rotary positive displacement pumps - Performance tests for acceptance | |
| Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform | |
| Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface; German and English version EN 1459-5:2020/prA1:202 3 | |
| Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface | |
| Safety of industrial trucks - Self-propelled variable reach trucks (includes Amendment A2:2010) | |
| Sanitary appliances - Communal washing troughs | |
| Sawn timber - Assessment of drying quality | |
| Schlaucharmaturen mit Klemmfassungen - Teil 7: Hebelarmkupplungen; Deutsche und Englische Fassung prEN 14420-7:2025 | |
| Schutzsysteme zur Druckentlastung von Staubexplosionen; Deutsche Fassung EN 14491:2006, Berichtigung zu DIN EN 14491:2007-08; Deutsche Fassung EN 14491:2006/AC:2008 | |
| Schutzsysteme zur Druckentlastung von Staubexplosionen; Deutsche Fassung EN 14491:2006 | |
| Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets | |
| Self-contained closed-circuit breathing apparatus, compressed oxygen or compressed oxygen/nitrogen type - Requirements, testing, marking (includes Amendment A1:2000); English version of DIN EN 145:1997 + A1:2000 | |
| Self-supporting double skin metal faced insulating panels - Factory made products - Specifications; Corrigendum 1 to English version of DIN EN 14509:2007-02 | |
| Self-supporting double skin metal faced insulating panels - Factory made products - Specifications | |
| Shower enclosures - Functional requirements and test methods (includes Amendment A1:2008) | |
| Space engineering - Mechanical - Part 1: Thermal control; English version EN 14607-1:2004 | |
| Space engineering - Mechanical - Part 6: Pyrotechnics; English version EN 14607-6:2004 | |
| Space product assurance - Verification and approval of automatic machine wave soldering | |
| Sprayed concrete - Part 1: Definitions, specifications and conformity | |
| Sprayed concrete - Part 2: Execution | |
| Sterilisatoren fuer medizinische Zwecke - Ethylenoxid-Sterilis atoren - Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 1422:2025 | |
| Strassenmarkierungsm aterialien - Nachstreumittel - Markierungs-Glasperl en, Griffigkeitsmittel und Nachstreugemische; Deutsche Fassung EN 1423:2012 | |
| Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature | |
| Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) | |
| Structural round timber - Test methods | |
| Structural timber - Wood poles for overhead lines | |
| Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; Corrigendum 1 to DIN EN 14480:2004-11 | |
| Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method | |
| Surface active agents - Determination of foamability and degree of foamability - Circulation test method | |
| Surface active agents - Determination of surface tension | |
| Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 (includes Amendment A1:2009) | |
| Swap bodies - Swap tanks - Dimensions, requirements, test methods and operating conditions | |
| Symbols for timber and wood-based products | |
| Table tennis - Part 2: Posts for net assemblies - Requirements and test methods | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent | |
| Tanks for transport of dangerous goods - Terminology; German and English version prEN 14564:2025 | |
| Tanks for transport of dangerous goods - Terminology | |
| Temperature control devices and temperature limiters for heat generating systems | |
| Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete | |
| Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete | |
| Testing sprayed concrete - Part 4: Bond strength of cores by direct tension (includes Amendment A1:2008) | |
| Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens | |
| Testing sprayed concrete - Part 6: Thickness of concrete on a substrate | |
| Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete | |
| Textile floor coverings - Minimum requirements for carpet underlays | |
| Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device | |
| Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device | |
| Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction; Corrigendum 1 to... | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German... | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres | |
| Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene | |
| Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns | |
| Textiles - Upholstery fabrics - Specification and methods of test | |
| Textiles and textile products - Burning behaviour of bedding items - Classification scheme | |
| Textilien - Verfahren fuer die Bestimmung bestimmter aromatischer Amine aus Azofarbstoffen - Teil 3: Nachweis der Verwendung gewisser Azofarbstoffe die 4- Aminoazobenzol freisetzen koennen; Deutsche Fassung prEN 14362-3:2010 | |
| Thermal energy meters - Part 3: Data exchange and interfaces; German and English version prEN 1434-3:2023 | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray... | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products | |
| Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal spraying - Recommendations for thermal spraying | |
| Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample | |
| Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners | |
| Timber structures - Structural laminated veneer lumber - Requirements | |
| Tischtennis - Teil 1: Tischtennistische, funktionelle und sicherheitstechnisch e Anforderungen, Pruefverfahren; Deutsche Fassung EN 14468-1:2004 | |
| Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) | |
| Transportable refillable composite cylinders for LPG - Design and construction | |
| Ultrasonic domestic gas meters | |
| Underground fire hydrants | |
| Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes | |
| Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams | |
| Ventilation for buildings - Chilled ceilings - Testing and rating | |
| Ventilation for buildings - Ductwork - Measurement of ductwork surface area | |
| Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours EN 14483-2:2004... | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel | |
| Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems | |
| Vitreous and porcelain enamels - High voltage test | |
| Vorbeugende Kriminalitaetsbekaem pfung - Stadt- und Gebaeudeplanung - Teil 1: Begriffe; Dreisprachige Fassung EN 14383-1:2006 | |
| Waermedaemmstoffe fuer das Bauwesen - An der Verwendungsstelle hergestellter Waermedaemmstoff aus dispensiertem Polyurethan (PUR)- und Polyisocyanurat (PIR)-Hartschaum - Teil 1: Spezifikation fuer das Schaumsystem vor dem Einbau; Deutsche Fassung EN... | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestsung und fuer betriebstechnische Anlagen in der Industrie - Werkmaessig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation; Deutsche Fassung EN 14314:2009 | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestung und fuer betriebstechnische Anlagen in der Industrie - An der Verwendungsstelle hergestellter Waermedaemmstoff aus Polyurethan (PUR)- und Polyisocyanurat (PIR)-Spritzschaum - Teil 2: Spezifikation fuer die... | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestung und fuer betriebstechnische Anlagen in der Industrie - Werkmaessig hergestellte Produkte aus Calciumsilikat (CS) - Spezifikation; Deutsche Fassung EN 14306:2009 | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestung und fuer betriebstechnische Anlagen in der Industrie - Werkmaessig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation; Deutsche Fassung EN 14307:2009 | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestung und fuer betriebstechnische Anlagen in der Industrie - Werkmaessig hergestellte Produkte aus flexiblem Elastomerschaum (FEF) - Spezifikation; Deutsche Fassung EN 14304:2009 | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestung und fuer betriebstechnische Anlagen in der Industrie - Werkmaessig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation; Deutsche Fassung EN 14303:2009 | |
| Waermedaemmstoffe fuer die technische Gebaeudeausruestung und fuer betriebstechnische Anlagen in der Industrie - Werkmaessig hergestellte Produkte aus Schaumglas (CG) - Spezifikation; Deutsche Fassung EN 14305:2009 | |
| Water quality - Detection of human enteroviruses by monolayer plaque assay | |
| Water quality - Guidance standard for assessing the hydromorphological features of rivers | |
| Water quality - Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters | |
| Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys | |
| Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys | |
| Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys | |
| Windows - Determination of the resistance to racking | |
| Windows - Determination of the resistance to static torsion | |
| Wood flooring - Characteristics, evaluation of conformity and marking (includes Amendment A1:2008) | |
| Wood flooring - Characteristics, evaluation of conformity and marking Corrigendum 1 to English version of DIN EN 14342:2005-08 | |
| Wood-based panels - Melamine faced boards for interior uses - Definitons, requirements and classification | |
| Wood-based panels - Melamine faced boards for interior uses - Test methods | |
| Wood-based panels - Wood veneer floor covering; Corrigenda to DIN EN 14354:2005-03 | |
| Wood-based panels - Wood veneer floor covering | |
| Wood-based panels - Wood veneer floor coverings; German and English version prEN 14354:2024 | |
| Workplace atmospheres - Determination of diesel particulate matter - General requirements | |
| Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods | |
| Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods; Corrigendum to English version of DIN EN 14434:2005-03 | |
| Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods | |
| Zerstoerungsfreie Pruefung von Schweissverbindungen - Durchstrahlungspruef ung von Schmelzschweissverbi ndungen; Deutsche Fassung EN 1435:1997 + A1:2002 | |
| Zinc and zinc alloys - Secondary raw materials |
| << Prev | Next >> |