Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
200
250
300
350
400
450
500
510
520
530
540
550
551
552
553
554
555
556
557
558
559
560
561
562
563
570
580
590
600
610
620
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen fuer Dachabdichtungen - Regeln fuer die Probenentnahme; Deutsche Fassung EN 13416:2001 | |
| Adhesives for tiles - Determination of open time | |
| Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives | |
| Adhesives for tiles - Determination of wetting capability | |
| Aggregates for railway ballast | |
| Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance | |
| Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements | |
| Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods | |
| Anschlagseile aus Stahldrahtseilen - Sicherheit - Teil 1: Anschlagseile fuer allgemeine Hebezwecke; Deutsche Fassung EN 13414-1:2003+A2:2008 | |
| Anschlagseile aus Stahldrahtseilen - Sicherheit - Teil 3: Grummets und Kabelschlag-Anschlag seile; Deutsche Fassung EN 13414-3:2003+A1:2008 | |
| Armourstone - Part 1: Specification | |
| Armourstone - Part 2: Test methods | |
| Atemschutzgeraete - Benennungen von Einzelteilen; Deutsche Fassung EN 134:1998 | |
| Atemtherapiegeraete - Teil 1: Verneblersysteme und deren Bauteile; Deutsche Fassung EN 13544-1:2007+A1:2009 | |
| Bandbeschichtete Metalle - Pruefverfahren - Teil 21: Bewertung von freibewitterten Probenplatten; Deutsche Fassung EN 13523-21:2010 | |
| Bandbeschichtete Metalle - Pruefverfahren - Teil 27: Bestaendigkeit gegen feuchte Verpackung (Kataplasma-Test); Deutsche Fassung EN 13523-27:2009 | |
| Berichtigungen zu DIN EN 13445-5:2002-08 | |
| Berichtigungen zu DIN EN 1349:2000-12; Deutsche Fassung EN 1349:2000/AC:2001 | |
| Beschichtungsstoffe - Pulverbeschichtungen fuer verzinkte oder sherardisierte Stahlerzeugnisse fuer Bauzwecke; Deutsche Fassung EN 13438:2005, Berichtigungen zu DIN EN 13438:2006-01 | |
| Beschichtungsstoffe - Pulverbeschichtungen fuer verzinkte oder sherardisierte Stahlerzeugnisse fuer Bauzwecke; Deutsche Fassung EN 13438:2005 | |
| Beschichtungsstoffe - Wasserhaltige Beschichtungsstoffe und Beschichtungssysteme fuer Waende und Decken im Innenbereich - Einteilung; Deutsche Fassung EN 13300:2001 + AC:2002 | |
| Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements | |
| Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods (includes Amendment A1:2007) | |
| Biotechnology - Laboratories for research, development and analysis - Guidance on containment of genetically modifies plants | |
| Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria; English version of DIN EN 13312-1 | |
| Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; English version of DIN EN 13312-2 | |
| Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices; English version of DIN EN 13312-3 | |
| Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; English version of DIN EN 13312-4 | |
| Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; English version of DIN EN 13312-5 | |
| Biotechnology - Performance criteria for piping and instrumentation - Part 6: Equipment probes; English version of DIN EN 13312-6 | |
| Biotechnology - Performance criteria for vessels - Part 1: General performance criteria; English version of DIN EN 13311-1 | |
| Biotechnology - Performance criteria for vessels - Part 2: Pressure protection devices; English version of DIN EN 13311-2 | |
| Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; English version of DIN EN 13311-3 | |
| Biotechnology - Performance criteria for vessels - Part 4: Bioreactors; English version of DIN EN 13311-4 | |
| Biotechnology - Performance criteria for vessels - Part 5: Kill tanks; English version of DIN EN 13311-5 | |
| Biotechnology - Performance criteria for vessels - Part 6: Chromatography columns; English version of DIN EN 13311-6 | |
| Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus | |
| Bitumen and bituminous binders - Determination of staining tendency of bitumen | |
| Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens | |
| Bitumen and bituminous binders - Framework for specification of oxidised bitumens | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der elastischen Rueckstellung von modifiziertem Bitumen; Deutsche Fassung EN 13398:2010 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbestaendigkeit von modifiziertem Bitumen; Deutsche Fassung EN 13399:2010 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung des Destillationsverlauf es von mit Mineraloelfluxmittel n verschnittenen oder gefluxten bitumenhaltigen Bindemitteln; Deutsche Fassung EN 13358:2010 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach Erwaermung; Deutsche Fassung EN 13303:2009 | |
| Bitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen fuer Hartbitumen fuer industrielle Anwendungen; Deutsche Fassung EN 13305:2009 | |
| Bordsteine aus Naturstein fuer Aussenbereiche - Anforderungen und Pruefverfahren; Aenderung A20 | |
| Bueromoebel - Buero-Arbeitsstuhl - Teil 1: Masse - Bestimmung der Masse; Deutsche Fassung EN 1335-1:2020 | |
| Cathodic protection measurement techniques | |
| Characterization of sludges - Determination of Kjeldahl nitrogen; English version of DIN EN 13342 | |
| Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods; English version of DIN EN 13346 | |
| Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, CN - easily liberatable, F | |
| Chimneys - Requirements and test methods for clay/ceramic flue terminals | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one combustion appliance; German and English version prEN 13384-1:2025 | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance (includes Amendment A1:2009) | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance | |
| Clay pavers - Requirements and test methods | |
| Coating plants - Combined booths - Safety requirements (includes Amendment A1:2009) | |
| Coil coated metals - Test methods - Part 0: General introduction and list of test methods; English version of DIN EN 13523-0 | |
| Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation | |
| Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) | |
| Coil coated metals - Test methods - Part 12: Resistance to scratching | |
| Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat | |
| Coil coated metals - Test methods - Part 14: Chalking (Helmen method); English version of DIN EN 13523-14 | |
| Coil coated metals - Test methods - Part 15: Metamerism | |
| Coil coated metals - Test methods - Part 16: Resistance to abrasion | |
| Coil coated metals - Test methods - Part 17: Adhesion of strippable films | |
| Coil coated metals - Test methods - Part 18: Resistance to staining | |
| Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing | |
| Coil coated metals - Test methods - Part 1: Film thickness | |
| Coil coated metals - Test methods - Part 20: Foam adhesion | |
| Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison | |
| Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide | |
| Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking | |
| Coil coated metals - Test methods - Part 25: Resistance to humidity | |
| Coil coated metals - Test methods - Part 26: Resistance to condensation of water | |
| Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) | |
| Coil coated metals - Test methods - Part 2: Specular gloss; English version of DIN EN 13523-2 | |
| Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; English version of DIN EN 13523-3 | |
| Coil coated metals - Test methods - Part 4: Pencil hardness; English version of DIN EN 13523-4 | |
| Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); English version of DIN EN 13523-5 | |
| Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) | |
| Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); English version of DIN EN 13523-7 | |
| Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) | |
| Coil coated metals - Test methods - Part 9: Resistance to water immersion; English version of DIN EN 13523-9 | |
| Common rules for precast concrete products Corrigendum 1 to DIN EN 13369:2004-09 | |
| Common rules for precast concrete products; German and English version prEN 13369:2022 | |
| Common rules for precast concrete products | |
| Compressed natural gas vehicle operations; English version of DIN EN 13423 | |
| Concrete kerb units - Requirements and test methods Corrigendum 1 to English version of DIN EN 1340:2003-08 | |
| Concrete kerb units - Requirements and test methods | |
| Concrete paving blocks - Requirements and test methods | |
| Concrete paving flags - Requirements and test methods Corrigendum 1 to English version of DIN EN 1339:2003-08 | |
| Concrete paving flags - Requirements and test methods | |
| Condition of drain and sewer systems outside buildings - Part 1: General requirements | |
| Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system Corrigendum 1 to English version of DIN EN 13508-2:2003-09 | |
| Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply; English version of DIN EN 13309 | |
| Copper and copper alloys - Pre-insulated copper tubes with solid covering | |
| Copper and copper alloys - Rod and wire for welding and braze welding | |
| Corrigenda to DIN EN 13383-1:2002-08 | |
| Corrigenda to DIN EN 13450:2003-06 | |
| Cryogenic vessels - Couplings for cryogenic service; English version of DIN EN 13371 | |
| Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements | |
| Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing Corrigendum 1 to English version of DIN EN 13530-2:2003-01 | |
| Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements | |
| Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing Corrigendum 1 to English version of DIN EN 13458-2:2003-02 | |
| Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements | |
| Determination of chelating agents in fertilizers by ion chromatography - Part 1: EDTA, HEDTA and DTPA; English version of DIN EN 13368-1 | |
| Determination of compressive strength of lightweight aggregate concrete with open structure | |
| Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery | |
| Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packaging | |
| Determination of flexural strength of autoclaved aerated concrete | |
| Determination of moisture content of autoclaved aerated concrete | |
| Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A | |
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B | |
| Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods; English version of DIN EN 13319 | |
| Duengemittel - Bestimmung von Chelatbildnern in Duengemitteln mit Chromatographie - Teil 3: Bestimmung von [S,S]-EDDS mit Ionenpaarchromatogra phie; Deutsche Fassung EN 13368-3:2017 | |
| Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997, modified) (includes Amendment A1:2008) | |
| Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermic electrical hybrid vehicles | |
| Electrically propelled road vehicles - Terminology | |
| Endverbindungen fuer Drahtseile aus Stahldraht - Sicherheit - Teil 3: Pressklemmen und Verpressen; Deutsche Fassung EN 13411-3:2004+A1:2008 | |
| Endverbindungen fuer Drahtseile aus Stahldraht - Sicherheit - Teil 5: Drahtseilklemmen mit U-foermigem Klemmbuegel; Deutsche Fassung EN 13411-5:2003+A1:2008 | |
| Endverbindungen fuer Drahtseile aus Stahldraht - Sicherheit - Teil 6: Asymmetrische Seilschloesser; Deutsche Fassung EN 13411-6:2004+A1:2008 | |
| Endverbindungen fuer Drahtseile aus Stahldraht - Sicherheit - Teil 9: Vollkauschen; Deutsche Fassung EN 13411-9:2021 | |
| Estrichmoertel und Estriche - Begriffe; Deutsche und Englische Fassung prEN 13318:2024 | |
| Estrichmoertel und Estriche - Begriffe; Dreisprachige Fassung EN 13318:2000 | |
| Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by o,o-EDDHA, o,o-EDDHMA and HBED by ion pair chromatography | |
| Fertilizers - Determination of flow rate; English version of DIN EN 13299 | |
| Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium; English version of DIN EN 13466-1 | |
| Fertilizers - Determination of water content (Karl Fischer methods) - Part 2: 2-propanol as extracting medium; English version of DIN EN 13466-2 | |
| Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; English version of DIN EN 13366 | |
| Fertilizers and liming materials - Classification; English version of DIN EN 13535 | |
| Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (includes Amendments A1:2009) | |
| Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services; German and English version EN 13501-2:2023/prA1:20... | |
| Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services (includes Amendment A1:2009) | |
| Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts... | |
| Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ventilation... | |
| Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests (includes Amendment A1:2009) | |
| Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests; Corrigendum 2 to English version of DIN EN 13501-5:2006-03... | |
| Flanges and their joints - Pipework components - Definition and selection of PN | |
| Flat pallets for materials handling - Principal dimensions | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation | |
| Fluessigkeitspumpen - Tauchmotorpumpen und -pumpenaggregate - Besondere Sicherheitsanforderu ngen; Deutsche Fassung prEN 13386:1998 | |
| Food processing machinery - Curing injection machines - Safety and hygiene requirements | |
| Food processing machinery - Pie and tart machines - Safety and hygiene requirements | |
| Footwear - Sampling location, preparation und duration of conditioning of samples and test pieces; English version of DIN EN 13400 | |
| Footwear - Test methods for uppers - Breaking strength and elongation; English version of DIN EN 13522 | |
| Footwear - Test methods for uppers - Delamination resistance; English version of DIN EN 13514 | |
| Footwear - Test methods for uppers - High-temperature behaviour; English version of DIN EN 13519 | |
| Footwear - Test methods for uppers - Water resistance | |
| Footwear - Test methods for uppers and lining - Flex resistance; English version of DIN EN 13512 | |
| Footwear - Test methods for uppers and lining - Water vapour permeability and absorption; English version of DIN EN 13515 | |
| Footwear - Test methods for uppers, lining and insocks - Abrasion resistance | |
| Footwear - Test methods for uppers, lining and insocks - Colour migration; English version of DIN EN 13517 | |
| Footwear - Test methods for uppers, lining and insocks - Thermal insulation; English version of DIN EN 13521 | |
| Forstmaschinen - Buschholzhacker - Sicherheit; Deutsche Fassung EN 13525:2005+A2:2009 | |
| Furniture - Bunk beds and high beds for non-domestic use - Part 1: Safety, strength and durability requirements | |
| Furniture - Bunk beds and high beds for non-domestic use - Part 2: Test methods | |
| Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises; English version of DIN EN 13410 | |
| General requirements for components used for renovation and repair of drain and sewer systems outside buildings; English version of DIN EN 13380 | |
| Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures | |
| Geosynthetic Barriers - Characteristics required for use in the construction of canals | |
| Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment | |
| Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams | |
| Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites | |
| Geosynthetische Dichtungsbahnen - Eigenschaften, die fuer die Anwendung beim Bau von Kanaelen erforderlich sind; Deutsche und Englische Fassung prEN 13362:2016 | |
| Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; English version of DIN EN 13541 | |
| Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement | |
| Helmets for users of luges | |
| Identification card systems - Man-machine interface - Part 1: Design principles for the user interface - Symbols in the form of icons on screens and/or pictograms | |
| Identification card systems - Man-machine interface - Part 1: Design principles for the user interface | |
| Identification card systems - Man-machine interface - Part 2: Dimensions and location of a tactile identifier for ID-1 cards | |
| Identification card systems - Man-machine interface - Part 3: Keypads | |
| Identification card systems - Man-machine interface - Part 4: Coding of user requirements for people with special needs | |
| Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differentiation of application on ID-1 cards | |
| Industrial valves - Diaphragm valves made of metallic materials; English version of DIN EN 13397 | |
| Instandhaltung - Begriffe der Instandhaltung; Dreisprachige Fassung EN 13306:2010 | |
| Keramikmaschinen - Sicherheit - Schiebebuehnen und Wagen; Deutsche Fassung EN 13367:2005+A1:2008+A C:2009 | |
| Kerbs of natural stone for external paving - Requirements and test methods; English version of DIN EN 1343 | |
| Kitchen sinks - Functional requirements and test methods | |
| Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 4: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprue fungen von Anlagen zur Rauchfreihaltung; Deutsche Fassung EN 13501-4:2007+A1:2009 | |
| Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 5: Klassifizierung mit den Ergebnissen aus Pruefungen von Bedachungen bei Beanspruchung durch Feuer von aussen; Deutsche Fassung EN 13501-5:2005, Berichtigungen... | |
| Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 6: Klassifizierung mit den Ergebnissen aus den Pruefungen zum Brandverhalten von elektrischen Kabeln; Deutsche Fassung EN 13501-6:2014 | |
| Kryo-Behaelter - Ortsfeste, vakuum-isolierte Behaelter - Teil 1: Grundanforderungen; Deutsche Fassung EN 13458-1:2002, Berichtigung zu DIN EN 13458-1:2002-09 | |
| Kryo-Behaelter - Ortsfeste, vakuum-isolierte Behaelter - Teil 1: Grundanforderungen; Deutsche Fassung EN 13458-1:2002 | |
| Kunststoff-Rohrleitu ngssysteme fuer erdverlegte drucklose Abwasserkanaele und -leitungen - Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE) - Teil 1: Allgemeine Anforderungen und Le | |
| Kunststoff-Rohrleitu ngssysteme fuer erdverlegte drucklose Abwasserkanaele und -leitungen - Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE) - Teil 2: Anforderungen an Rohre und Form... | |
| Kunststoff-Rohrleitu ngssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebaeudestruktur - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 1: Anforderungen an Rohre, Formstuecke und das Rohrleitungssystem; Deutsche und Englische... | |
| Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer fuer medizinische Gase oder Vakuum; Deutsche Fassung EN 13348:2008 | |
| Lager im Bauwesen - Teil 6: Kipplager; Deutsche Fassung prEN 1337-6:1994 | |
| Lager im Bauwesen - Teil 8: Fuehrungslager und Festhaltekonstruktio nen; Deutsche Fassung EN 1337-8:2007 | |
| Lager im Bauwesen - Teil 9: Schutz; Deutsche Fassung EN 1337-9:1997 | |
| Lager im Bauwesen; Teil 1: Allgemeine Anforderungen; Deutsche Fassung prEN 1337-1:1993 | |
| Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods (includes Amendment A1:2008) | |
| Land- und forstwirtschaftliche Maschinen - Zwischenreihenmaeher - Sicherheit; Deutsche Fassung EN 13448:2001+A1:2009 | |
| Leather - Upholstery leather characteristics - Guide for selection of leather for furniture | |
| Liming materials - Determination of calcium content - Oxalate method; English version of DIN EN 13475 | |
| Luft- und Raumfahrt - Raumfahrt-Projektman agement; Allgemeine Anforderungen - Teil 3: Projektorganisation; Deutsche und Englische Fassung EN 13290-3:2001 | |
| Luft- und Raumfahrt - Raumfahrt-Projektman agement; Allgemeine Anforderungen - Teil 4: Projektphaseneinteil ung und -planung; Deutsche und Englische Fassung EN 13290-4:2001 | |
| Luft- und Raumfahrt - Raumfahrt-Projektman agement; Allgemeine Anforderungen - Teil 7: Kosten- und Zeitplanmanagement; Deutsche und Englische Fassung EN 13290-7:2001 | |
| Maintenance - Documentation for maintenance | |
| Manufactured articles filled with feather and down - Measurement of water absorption of filling material; English version of DIN EN 13543 | |
| Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing; English version of DIN EN 13542 | |
| Manufactured articles filled with feather and down - Requirements for clothing - Light use; English version of DIN EN 13536 | |
| Maschinen fuer den Strassenbetriebsdien st - Sicherheitsanforderu ngen; Deutsche Fassung EN 13524:2003+A1:2009 | |
| Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Spalt-, Schaerf-, Schneid-, Klebstoffauftrag- und Klebstofftrocknungsm aschinen - Sicherheitsanforderu ngen; Deutsche Fassung EN 13457:2004+A1:2010 | |
| Massivholzplatten (SWP) - Anforderungen; Deutsche Fassung EN 13353:2008 | |
| Massivholzplatten (SWP) - Qualitaet der Verklebung - Pruefverfahren; Deutsche Fassung EN 13354:2008 | |
| Mechanical tests for post-tensioning systems | |
| Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration (includes Amendment A1:2008) | |
| Metallic industrial piping - Part 1: General (includes Amendment A1:2019) | |
| Metallic industrial piping - Part 1: General (includes Amendment A2:2008) | |
| Metallic industrial piping - Part 1: General, Corrigendum to DIN EN 13480-1:2014-12 | |
| Metallic industrial piping - Part 2 : Materials; Corrigenda 1 to DIN EN 13480-2:2002:08 | |
| Metallic industrial piping - Part 2 : Materials | |
| Metallic industrial piping - Part 2: Materials (includes Amendment A1:2010) | |
| Metallic industrial piping - Part 2: Materials (includes Amendment A2:2010) | |
| Metallic industrial piping - Part 2: Materials (includes Amendment A3:2018) | |
| Metallic industrial piping - Part 2: Materials (includes Amendment A7:2020) | |
| Metallic industrial piping - Part 2: Materials (includes Amendment A8:2021) | |
| Metallic industrial piping - Part 2: Materials, Corrigendum 2 to DIN EN 13480-2:2014-12 | |
| Metallic industrial piping - Part 3: Design and calculation (includes Amendment A1:2017) | |
| Metallic industrial piping - Part 3: Design and calculation (includes Amendment A5:2022) | |
| Metallic industrial piping - Part 3: Design and calculation; Corrigenda 2 to DIN EN 13480-3:2002-08 | |
| Metallic industrial piping - Part 3: Design and calculation; Corrigenda to DIN EN 13480-3:2002-08 | |
| Metallic industrial piping - Part 3: Design and calculation | |
| Metallic industrial piping - Part 4: Fabrication and installation (includes Amendment A1:2023) | |
| Metallic industrial piping - Part 4: Fabrication and installation (includes Amendment A2:2015) | |
| Metallic industrial piping - Part 4: Fabrication and installation (includes Amendment A4:2017) | |
| Metallic industrial piping - Part 4: Fabrication and installation (includes Amendment A5:2017) | |
| Metallic industrial piping - Part 4: Fabrication and installation; Corrigenda 1 to DIN EN 13480-4:2002-08 | |
| Metallic industrial piping - Part 4: Fabrication and installation | |
| Metallic industrial piping - Part 5: Inspection and testing (includes Amendment A1:2019) | |
| Metallic industrial piping - Part 5: Inspection and testing (includes Amendment A2:2017) | |
| Metallic industrial piping - Part 5: Inspection and testing (includes Amendment A3:2017) | |
| Metallic industrial piping - Part 5: Inspection and testing, Corrigendum 2 to DIN EN 13480-5:2014-12 | |
| Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2012, Corrigendum to DIN EN 13480-5:2014-12 | |
| Metallic industrial piping - Part 5: Inspection and testing | |
| Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures | |
| Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (includes Amendment A2:2015) | |
| Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping, Corrigendum to DIN EN 13480-8:2014-12 | |
| Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping | |
| Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung; Deutsche Fassung EN 13480-4:2012/A3:2016 | |
| Metallische industrielle Rohrleitungen - Teil 6: Zusaetzliche Anforderungen an erdgedeckte Rohrleitungen; Deutsche Fassung EN 13480-6:2004 | |
| Metallische industrielle Rohrleitungen - Teil 6: Zusaetzliche Anforderungen an erdgedeckte Rohrleitungen; Deutsche Fassung EN 13480-6:2012, Berichtigung zu DIN EN 13480-6:2014-12 | |
| Metallische industrielle Rohrleitungen - Teil 6: Zusaetzliche Anforderungen an erdgedeckte Rohrleitungen; Deutsche Fassung EN 13480-6:2012/A1:2016 | |
| Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und Aluminiumlegierungen ; Deutsche Fassung EN 13480-8:2007/A1:2011 | |
| Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength | |
| Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time | |
| Nahrungsmittelmaschi nen - Hub- und Kippeinrichtungen fuer Bottiche - Sicherheits- und Hygieneanforderungen ; Deutsche Fassung EN 13288:2005+A1:2009 | |
| Nahrungsmittelmaschi nen - Mischmaschinen mit waagerechten Wellen - Sicherheits- und Hygieneanforderungen ; Deutsche Fassung EN 13389:2005+A1:2009 | |
| Nicht-elektrische Geraete fuer den Einsatz in explosionsgefaehrdet en Bereichen - Teil 1: Grundlagen und Anforderungen; Deutsche Fassung EN 13463-1:2009 | |
| Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic | |
| Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 1: Equipment description; English version of DIN EN 13477-1 | |
| Non-destructive testing - Terminology - Part 11: Terms used in X-ray diffraction from polycristalline and amorphous materials; Trilingual version EN 1330-11:2007 | |
| Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing; Trilingual version EN 1330-3:1997 | |
| Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing; Trilingual version EN 1330-4:2010 | |
| Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing; Trilingual version EN 1330-8:1998 | |
| Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2009 | |
| Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' | |
| Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' | |
| Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure "d" | |
| Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source "b" | |
| Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c" | |
| Offene Datenkommunikation fuer die Gebaeudeautomation und Gebaeudemanagement - Elektrische Systemtechnik fuer Heim und Gebaeude - Teil 2: KNXnet/IP-Kommunikat ion; Deutsche Fassung EN 13321-2:2012 | |
| Office furniture - Office work chair - Part 2: Safety requirements | |
| Office furniture - Office work chair - Part 3: Test methods | |
| Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements | |
| Ortsbewegliche Gasflaschen - Batterie-Fahrzeuge fuer bestaendige und verfluessigte Gase (ausser Acetylen) - Pruefung zum Zeitpunkt des Fuellens; Deutsche Fassung EN 13385:2002 | |
| Ortsbewegliche Gasflaschen - Batterie-Fahrzeuge fuer bestaendige und verfluessigte Gase (ausser Acetylen) - Pruefung zum Zeitpunkt des Fuellens; Deutsche und Englische Fassung prEN 13385:2024 | |
| Ortsbewegliche Gasflaschen - Wiederbefuellbare geschweisste Flaschen aus Stahl - Gestaltung und Konstruktion - Teil 2: Flaschen aus nichtrostendem Stahl; Deutsche Fassung EN 13322-2:2003/prA1:20 06 | |
| Packaging - Rate of energy recovery - Definition and method of calculation | |
| Packaging - Rate of recycling - Definition and method of calculation | |
| Packaging - Requirements for packaging recoverable by material recycling | |
| Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value | |
| Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging Corrigendum 2 to English version of DIN EN... | |
| Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste | |
| Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction | |
| Packaging - Reuse | |
| Packaging - Specification for edge protectors; English version of DIN EN 13393 | |
| Packaging - Specification for non-metallic tensional strapping; English version of DIN EN 13394 | |
| Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart | |
| Packmittel - Zylindrische Laminattuben - Masse und Toleranzen; Deutsche Fassung EN 13461:2009 | |
| Pasta processing plants - Dryers and coolers - Safety and hygiene requirements; English version of DIN EN 13289 | |
| Pasta processing plants - Pasta presses - Safety and hygiene requirements; English version of DIN EN 13378 | |
| Pasta processing plants - Spreader, stripping and cutting machines, stick return conveyors, stick magazines - Safety and hygiene requirements; English version of DIN EN 13379 | |
| Pflastersteine aus Beton - Anforderungen und Pruefverfahren; Deutsche Fassung EN 1338:2003, Berichtigungen zu DIN EN 1338:2003-08; Deutsche Fassung EN 1338:2003/AC:2006 | |
| Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites | |
| Plastics and rubber machines - Winding machines for film or sheet - Safety requirements (includes Amendment A1:2008) | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and... | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the... | |
| Platten aus Naturstein fuer Aussenbereiche - Anforderungen und Pruefverfahren; Aenderung A20 | |
| Prefabricated timber formwork beams - Requirements, classification and assessment | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time | |
| Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack | |
| Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars | |
| Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar | |
| Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead | |
| Pruefung von Naturstein - Bestimmung der Ausbruchlast am Ankerdornloch; Deutsche Fassung EN 13364:2001 | |
| Pruefung von Naturstein - Bestimmung der Ausbruchlast am Ankerdornloch; Deutsche und Englische Fassung prEN 13364:2024 | |
| Pruefverfahren fuer Naturstein - Bestimmung geometrischer Merkmale von Gesteinen; Deutsche Fassung EN 13373:2020 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 10: Brandschutzmassnahme n fuer Stahl-Vollstaebe unter Zugbeanspruchung; Deutsche Fassung EN 13381-10:2020 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 1: Horizontal angeordnete Brandschutzbekleidun gen; Deutsche Fassung EN 13381-1:2014 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 3: Brandschutzmassnahme n fuer Betonbauteile; Deutsche Fassung EN 13381-3:2015 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 5: Brandschutzmassnahme n fuer profilierte Stahlblech/Beton-Ver bundkonstruktionen; Deutsche Fassung EN 13381-5:2014 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 7: Brandschutzmassnahme n fuer Holzbauteile; Deutsche Fassung EN 13381-7:2019 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 7: Brandschutzmassnahme n fuer Holzbauteile; Deutsche und Englische Fassung prEN 13381-7:2023 | |
| Pruefverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 8: Reaktive Ummantelung von Stahlbauteilen; Deutsche Fassung EN 13381-8:2010 | |
| Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements | |
| Railway applications - Braking - Mass transit brake systems - Part 2: Methods of test | |
| Railway applications - Suspension components - Helical suspension springs, steel | |
| Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions (includes Amendment A1:2006) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers (includes Amendment A1:2006) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers (includes Amendment A1:2006) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers (includes Corrigendum AC:2004 + Amendment A1:2006) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track (includes Amendment A1:2006) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails (includes Amendment A1:2006) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads | |
| Refrigerating systems and heat pumps - Competence of personnel; English version of DIN EN 13313 | |
| Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; English version of DIN EN 13473-1 | |
| Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; English version of DIN EN 13473-2 | |
| Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; English version of DIN EN 13473-3 | |
| Reinforcement - Specifications for woven fabrics - Part 1: Designation; English version of DIN EN 13417-1 | |
| Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements; English version EN 13417-2 | |
| Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements; English version of DIN EN 13417-3 | |
| Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; English version of DIN EN 13432 | |
| Requirements for sleeping bags | |
| Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification; English version of DIN EN 13413 | |
| Respiratory protective devices - Classification; English version of DIN EN 133 | |
| Road marking materials - Sampling from storage and testing | |
| Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification | |
| Rubber hoses and hose assemblies for asphalt and bitumen - Specification; English version of DIN EN 13482 | |
| Safety of machinery - Fire prevention and protection (includes Amendment A1:2008) | |
| Schweisszusaetze - Allgemeine Produktnorm fuer Zusaetze und Pulver zum Schmelzschweissen von metallischen Werkstoffen; Deutsche Fassung EN 13479:2004 | |
| Setts of natural stone for external paving - Requirements and test methods; Amendement A20 | |
| Setts of natural stone for external paving - Requirements and test methods | |
| Shutters - Hard body impact and prevention of access - Test methods | |
| Shutters and blinds - Measurement of operating force - Test methods; English version of DIN EN 13527 | |
| Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified); English version of DIN EN 13402-1 | |
| Size designation of clothes - Part 2: Primary and secondary dimensions | |
| Size designation of clothes - Part 3: Measurements and intervals | |
| Slabs of natural stone for external paving - Requirements and test methods; Corrigenda 1 to DIN EN 1341:2002-04 | |
| Slabs of natural stone for external paving - Requirements and test methods; English version of DIN EN 1341 | |
| Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method Corrigenda to English version of DIN EN 13363-2:2005-06... | |
| Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method | |
| Sonnenschutzeinricht ungen in Kombination mit Verglasungen - Berechnung der Solarstrahlung und des Lichttransmissionsgr ades - Teil 1: Vereinfachtes Verfahren; Deutsche Fassung EN 13363-1:2003+A1:2007 | |
| Sonnenschutzeinricht ungen in Kombination mit Verglasungen - Berechnung der Solarstrahlung und des Lichttransmissionsgr ades - Teil 1: Vereinfachtes Verfahren; Deutsche Fassung EN 13363-1:2003+A1:2007 , Berichtigung zu DIN EN 13363-1:2007-09; Deutsche... | |
| Space product assurance - General requirements - Part 2: Quality assurance; German and English version EN 13291-2:2003 | |
| Space product assurance - General requirements - Part 3: Materials, mechanical parts and processes | |
| Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and... | |
| Specification for the performance of automatic tank contents gauges | |
| Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method; English version of... | |
| Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer | |
| Stellgeraete fuer die Prozessregelung; Deutsche Fassung EN 1349:2000 | |
| Structural bearings - Part 10: Inspection and maintenance | |
| Structural bearings - Part 11: Transport, storage and installation | |
| Structural bearings - Part 1: General design rules; English version of DIN EN 1337-1 | |
| Structural bearings - Part 2: Sliding elements | |
| Structural bearings - Part 3: Elastomeric bearings | |
| Structural bearings - Part 4: Roller bearings Corrigendum 1 to English version of DIN EN 1337-4:2004-08 | |
| Structural bearings - Part 4: Roller bearings | |
| Structural bearings - Part 5: Pot bearings | |
| Structural bearings - Part 6: Rocker bearings | |
| Structural bearings - Part 7: Spherical and cylindrical PTFE bearings | |
| Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC) | |
| Surface active agents - Determination of free amine content of alkyl dimethyl betaines; English version of DIN EN 13435 | |
| Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates | |
| Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment | |
| Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads | |
| Swimming pool equipment - Part 1: General safety requirements and test methods; English version of DIN EN 13451-1 | |
| Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends; English version of DIN EN 13451-2 | |
| Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use; German... | |
| Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes; English version of DIN EN 13451-3 | |
| Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms; English version of DIN EN 13451-4 | |
| Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms; German and English version prEN 13451-4:2024 | |
| Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines; English version of DIN EN 13451-5 | |
| Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards; English version of DIN EN 13451-6 | |
| Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals; English version of DIN EN 13451-7 | |
| Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features; English version of DIN EN 13451-8 | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly (includes Amendment A1:2006) | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Non-pressure balanced footvalve | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve | |
| Temperaturregistrier geraete und Thermometer fuer den Transport, die Lagerung und die Verteilung von gekuehlten, gefrorenen, tiefgefrorenen Lebensmitteln und Eiskrem - Regelmaessige Pruefungen; Deutsche Fassung EN 13486:2001 | |
| Temporaere Seitenschutzsysteme - Produktfestlegungen - Pruefverfahren; Deutsche und Englische Fassung prEN 13374:2022 | |
| Temporary edge protection systems - Product specification, test methods | |
| Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings (includes Amendment A1:2008) | |
| Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings (includes Amendment A1:2008) | |
| Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing (includes Amendment A1:2008) | |
| Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008) | |
| Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 11: Applied protection to solid steel bars in tension based on mechanically loaded fire tests; | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings | |
| Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites | |
| Textile Bodenbelaege - Einstufung von Polvlies-Bodenbelaeg en; Deutsche Fassung EN 13297:2007, Berichtigung zu DIN EN 13297:2007-12; Deutsche Fassung EN 13297:2007/AC:2008 | |
| Textile Bodenbelaege - Einstufung von Polvlies-Bodenbelaeg en; Deutsche Fassung EN 13297:2007 | |
| Textiles - Monofilaments - Determination of linear density; English version of DIN EN 13392 | |
| Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation; English version of DIN EN 13467 | |
| Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation; English version of DIN EN 13472 | |
| Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; English version of DIN EN 13470 | |
| Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; GEnglish version of DIN EN 13471 | |
| Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, and sodium ions and pH; English version of DIN EN 13468... | |
| Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation; English version of DIN EN 13469 | |
| Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes | |
| Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) | |
| Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) | |
| Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) | |
| Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | |
| Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification | |
| Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification | |
| Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying | |
| Thermometer zur Messung der Luft- und Produkttemperatur fuer den Transport, die Lagerung und die Verteilung von gekuehlten, gefrorenen, tiefgefrorenen Lebensmitteln und Eiskrem - Pruefung, Leistung, Gebrauchstauglichkei t; Deutsche Fassung EN... | |
| Thermoplastic static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks -... | |
| Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements | |
| Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling | |
| Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; Corrigendum 1 to English version of DIN EN 13322-1:2006-05 | |
| Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel | |
| Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel | |
| Trench lining systems - Part 1: Product specifications | |
| Trench lining systems - Part 2: Assessment by calculation or test | |
| Unbefeuerte Druckbehaelter - Teil 1: Allgemeines; Deutsche Fassung EN 13445-1:2009/A1:2013 | |
| Unbefeuerte Druckbehaelter - Teil 1: Allgemeines; Deutsche Fassung EN 13445-1:2009 | |
| Unbefeuerte Druckbehaelter - Teil 1: Allgemeines; Deutsche Fassung EN 13445-1:2014/A2:2018 | |
| Unbefeuerte Druckbehaelter - Teil 2: Werkstoffe; Deutsche Fassung EN 13445-2:2009/A1:2012 | |
| Unbefeuerte Druckbehaelter - Teil 2: Werkstoffe; Deutsche Fassung EN 13445-2:2009/A2:2012 | |
| Unbefeuerte Druckbehaelter - Teil 2: Werkstoffe; Deutsche Fassung EN 13445-2:2009 | |
| Unbefeuerte Druckbehaelter - Teil 2: Werkstoffe; Deutsche Fassung EN 13445-2:2014/A3:2018 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2009, nur auf CD-ROM | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2009/A1:2012 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2009/A2:2013 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2014/A3:2017 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2014/A4:2018 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2014/A5:2018 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2014/A6:2019 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2014/A7:2019 | |
| Unbefeuerte Druckbehaelter - Teil 3: Konstruktion; Deutsche Fassung EN 13445-3:2014/A8:2019 | |
| Unbefeuerte Druckbehaelter - Teil 5: Inspektion und Pruefung; Deutsche Fassung EN 13445-5:2009/A1:2011 | |
| Unbefeuerte Druckbehaelter - Teil 5: Inspektion und Pruefung; Deutsche Fassung EN 13445-5:2009/A2:2011 | |
| Unbefeuerte Druckbehaelter - Teil 5: Inspektion und Pruefung; Deutsche Fassung EN 13445-5:2009/A3:2011 | |
| Unbefeuerte Druckbehaelter - Teil 5: Inspektion und Pruefung; Deutsche Fassung EN 13445:5-2009 | |
| Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures | |
| Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag | |
| Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures | |
| Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value | |
| Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling | |
| Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation | |
| Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder | |
| Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction | |
| Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction | |
| Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression | |
| Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression | |
| Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table | |
| Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures | |
| Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys | |
| Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys | |
| Unfired pressure vessels - Part 14: Additional requirements for pressure equipment and pressure components fabricated with additive manufacturing methods; German and English version prEN 13445-14:2024 | |
| Unfired pressure vessels - Part 4: Fabrication (includes Amendment A1:2011) | |
| Unfired pressure vessels - Part 4: Fabrication (includes Amendment A2:2014) | |
| Unfired pressure vessels - Part 4: Fabrication | |
| Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron (includes Amendment A1:2015) | |
| Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron (includes Amendment A2:2018) | |
| Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | |
| Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys (includes Amendment A1:2014) | |
| Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys | |
| Untersuchung und Beurteilung von Entwaesserungssystem en ausserhalb von Gebaeuden - Teil 2: Kodiersystem fuer die optische Inspektion; Deutsche Fassung EN 13508-2:2003+A1:2011 | |
| Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards | |
| Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders (includes Amendment A1:2009) | |
| Visibility accessories for non-professional use - Test methods and requirements; English version of DIN EN 13356 | |
| Vordruck fuer Bauartspezifikation: Dauerstrich-Wanderfe ldroehren fuer Leistungsverstaerker bis 500 Watt; Deutsche Fassung EN 135001:1992 | |
| Waermedaemmstoffe fuer das Bauwesen - Bestimmung der mechanischen Eigenschaften von Glasfasergewebe als Armierung fuer aussenseitige Waermedaemm-Verbunds ysteme mit Putz (WDVS); Deutsche und Englische Fassung prEN 13496:2021 | |
| Wall-hung urinals - Functional requirements and test methods | |
| Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 \xb5m to 150 \xb5m - Requirements for performances, safety and testing (includes Amendment A1:2007) | |
| Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 \xb5m to less than 80 \xb5m - Requirements for performance, safety and testing (includes Amendment A1:2007)... | |
| Windows - Behaviour between different climates - Test method | |
| Wohnmoebel - Betten und Matratzen - Messverfahren und Toleranzempfehlungen ; Deutsche Fassung EN 1334:1996 | |
| Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents | |
| Wood flooring - Mosaic parquet elements | |
| Wood flooring - Multi-layer parquet elements | |
| Wood-based panels - Determination of withdrawal capacity of fasteners | |
| Zerstoerungsfreie Pruefung - Terminologie - Teil 10: Begriffe fuer Sichtpruefung; Dreisprachige Fassung EN 1330-10:2003 | |
| Zerstoerungsfreie Pruefung - Terminologie - Teil 1: Allgemeine Begriffe; Dreisprachige Fassung EN 1330-1:1998 | |
| Zerstoerungsfreie Pruefung - Terminologie - Teil 2: Begriffe, die von allen zerstoerungsfreien Pruefverfahren benutzt werden; Dreisprachige Fassung EN 1330-2:1998 |
| << Prev | Next >> |