Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
200
250
300
350
400
450
500
510
520
530
540
550
559
560
561
562
563
564
565
566
567
568
569
570
571
580
590
600
610
620
630
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abgasanlagen - System-Abgasanlagen aus Beton - Teil 1: Raumluftabhaengige Anwendungen; Deutsche Fassung EN 16497-1:2015 | |
| Abgasanlagen - System-Abgasanlagen aus Beton - Teil 2: Luft-Abgas-Systeme; Deutsche Fassung EN 16497-2:2017 | |
| Abgasanlagen - Zubehoerteile - Teil 1: Schalldaempfer fuer Abgasanlagen - Anforderungen und Pruefverfahren; Deutsche Fassung EN 16475-1:2020 | |
| Abgasanlagen - Zubehoerteile - Teil 6: Zugangsbauteile - Anforderungen und Pruefverfahren; Deutsche Fassung EN 16475-6:2020 | |
| Acoustics - Test code for suspended ceilings - Sound absorption | |
| AIDC technologies - Operational aspects affecting the reading of bar code symbols | |
| Akustik - Pruefvorschrift fuer Trockenwandsysteme aus Metallstaenderwaende n mit Gipsplattenbeplankun g - Messung der Luftschalldaemmung; Deutsche Fassung EN 16703:2015 | |
| Alkoholbetriebene abzugslose Feuerstaetten - Sicherheitstechnisch e Anforderungen und Pruefmethoden - Teil 2: Automatisch betriebene dekorative Feuerstaetten fuer den Haushaltsbereich; Deutsche und Englische Fassung prEN 16647-2:2025 | |
| Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications | |
| Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip | |
| Aluminium und Aluminiumlegierungen - Leitfaden zur Fertigung von Folienvorwalzbaender n fuer halbstarre Lebensmittelbehaelte r; Deutsche Fassung EN 16773:2016 | |
| Ausruestung fuer das Gleitschirmfliegen - Gurtzeuge - Sicherheitstechnisch e Anforderungen und Pruefung der Festigkeit; Deutsche Fassung EN 1651:1999 | |
| Aussenluft - Automatische Messeinrichtungen zur Bestimmung der Staubkonzentration (PM10; PM2,5); Deutsche Fassung EN 16450:2017 | |
| Automaten fuer Eiskrem - Bestimmung von Leistungsmerkmalen und Energieverbrauch; Deutsche Fassung EN 16764:2016 | |
| Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods | |
| Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique | |
| Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods | |
| Bahnanwendungen - Anforderungen an ERTMS-Strecken- und Signaltafeln; Deutsche Fassung EN 16494:2015 | |
| Bahnanwendungen - Anforderungen an ERTMS-Strecken- und Signaltafeln; Deutsche und Englische Fassung prEN 16494:2022 | |
| Bahnanwendungen - Bremse - Bremsbelaghalter; Deutsche Fassung EN 16451:2015 | |
| Bahnanwendungen - Bremse - Bremskloetze; Deutsche und Englische Fassung prEN 16452:2025 | |
| Bahnanwendungen - Bremse - Bremsklotzsohlen; Deutsche Fassung EN 16452:2015 | |
| Bahnanwendungen - Feste Fahrbahn-Systeme - Teil 1: Allgemeine Anforderungen; Deutsche Fassung EN 16432-1:2017 | |
| Bahnanwendungen - Feste Fahrbahn-Systeme - Teil 2: Systementwurf, Teilsysteme und Komponenten; Deutsche Fassung EN 16432-2:2017 | |
| Bahnanwendungen - Feste Fahrbahn-Systeme - Teil 3: Abnahme; Deutsche Fassung EN 16432-3:2021 | |
| Bahnanwendungen - Gestaltung fuer die Nutzung durch PRM - Allgemeine Anforderungen - Teil 2: Informationen; Deutsche Fassung EN 16584-2:2017 | |
| Bahnanwendungen - Gestaltung fuer die Nutzung durch PRM - Allgemeine Anforderungen - Teil 3: Optische Eigenschaften und Rutschfestigkeit; Deutsche Fassung EN 16584-3:2017 | |
| Bahnanwendungen - Gestaltung fuer die Nutzung durch PRM - Ausstattung und Bauteile in Schienenfahrzeugen - Teil 1: Toiletten; Deutsche Fassung EN 16585-1:2017 | |
| Bahnanwendungen - Gestaltung fuer die Nutzung durch PRM - Ausstattung und Bauteile in Schienenfahrzeugen - Teil 3: Lichte Raeume und Innentueren; Deutsche Fassung EN 16585-3:2017 | |
| Bahnanwendungen - Gestaltung fuer die Nutzung durch PRM - Barrierefreier Zugang - Teil 1: Einstiegs- und Ausstiegsstufen; Deutsche Fassung EN 16586-1:2017 | |
| Bahnanwendungen - Gestaltung fuer die Nutzung durch PRM - Barrierefreier Zugang - Teil 2: Einstiegshilfen; Deutsche Fassung EN 16586-2:2017 | |
| Bahnanwendungen - Infrastruktur - Zerstoerungsfreie Pruefung an Schienen im Gleis - Teil 4: Qualifizierung von Personal fuer die zerstoerungsfreie Pruefung an Gleisen; Deutsche Fassung EN 16729-4:2018 | |
| Bahnanwendungen - Oberbau - Instandsetzung und Reparatur von Herzstuecken aus Manganhartstahlguss; Deutsche Fassung EN 16725:2016 | |
| Bergsteigerausruestu ng - Lawinen-Airbag-Syste me - Sicherheitstechnisch e Anforderungen und Pruefverfahren; Deutsche Fassung EN 16716:2017 | |
| Bergsteigerausruestu ng - Lawinen-Airbag-Syste me - Sicherheitstechnisch e Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 16716:2025 | |
| Beschichtungsstoffe - Reaktive Beschichtungen fuer den Brandschutz metallischer Substrate - Begriffe, Einteilung, Eigenschaften und Bezeichnung; Deutsche Fassung EN 16623:2015 | |
| Beschichtungsstoffe - Spachtelmassen bei Innen- und/oder Aussenarbeiten - Anpassung der Spachtelmassen an die europaeischen Normen; Deutsche Fassung EN 16566:2014 | |
| Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen fuer nicht tragende Anwendungen; Deutsche Fassung EN 16556:2014 | |
| Bestimmung des Widerstands von Materialien gegen die Permeation von Chemikalien - Teil 2: Permeation durch eine gasfoermige Chemikalie unter Dauerkontakt; Deutsche Fassung EN 16523-2:2015 | |
| Bewohnbare Freizeitfahrzeuge - Caravans - Teil 2: Zuladung; Deutsche Fassung EN 1645-2:2008 | |
| Bewohnbare Freizeitfahrzeuge - Mobilheime - Anforderungen an den Wohnbereich hinsichtlich Gesundheit und Sicherheit; Deutsche Fassung EN 1647:2004+A1:2008 | |
| Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis | |
| Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method | |
| Bio-based products - Sustainability criteria | |
| Bio-based solvents - Requirements and test methods | |
| Biobasierte Produkte - Gehalt an biobasiertem Kohlenstoff - Bestimmung des Gehalts an biobasiertem Kohlenstoff mittels Radiokarbonmethode; Deutsche Fassung EN 16640:2017 | |
| Biobasierte Produkte - Oekobilanzen; Deutsche Fassung EN 16760:2015 | |
| Biobasierte Produkte - Terminologie; Deutsche Fassung EN 16575:2014 | |
| Bitumen und bitumenhaltige Bindemittel - MSCR-Pruefung (Multiple Stress Creep and Recovery Test); Deutsche Fassung EN 16659:2015 | |
| Bitumen und bitumenhaltige Bindemittel - MSCR-Pruefung (Multiple Stress Creep and Recovery Test); Deutsche Fassung prEN 16659:2013 | |
| Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces | |
| Characterization of sludges - Physical consistency - Part 1: Determination of flowability - Method by extrusion tube apparatus | |
| Charakterisierung von Abfaellen - Rahmenbedingungen fuer die Vorbereitung und Anwendung eines Untersuchungsprogram ms - Ziele, Planung und Bericht; Deutsche Fassung EN 16457:2014 | |
| Chemical disinfectants and antiseptics - Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area - Test method and... | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action -... | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and... | |
| Chemische Desinfektionsmittel und Antiseptika - Chemothermische Waeschedesinfektion - Pruefverfahren und Anforderungen (Phase 2, Stufe 2); Deutsche Fassung EN 16616:2015 | |
| Chemische Desinfektionsmittel und Antiseptika - Chemothermische Waeschedesinfektion - Pruefverfahren und Anforderungen (Phase 2, Stufe 2); Deutsche und Englische Fassung EN 16616:2022/prA1:2024 | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitativer Suspensionsversuch zur Bestimmung der bakteriziden Wirkung chemischer Desinfektionsmittel und Antiseptika fuer den Veterinaerbereich - Pruefverfahren und Anforderungen (Phase 2, Stufe 1); Deutsche Fassu | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitativer Suspensionsversuch zur Bestimmung der bakteriziden Wirkung chemischer Desinfektionsmittel und Antiseptika fuer den Veterinaerbereich - Pruefverfahren und Anforderungen (Phase 2, Stufe 1); Deutsche und E... | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitativer Suspensionsversuch zur Bestimmung der fungiziden oder levuroziden Wirkung chemischer Desinfektionsmittel und Antiseptika in den Bereichen Lebensmittel, Industrie, Haushalt und oeffentliche Einrichtungen | |
| Chemische Desinfektionsmittel und Antiseptika - Quantitatives Pruefverfahren zur Bestimmung der bakteriziden und levuroziden Wirkung auf nicht-poroesen Oberflaechen mit mechanischer Einwirkung mit Hilfe von Tuechern im humanmedizinischen Bereich (4-Felder-Test) | |
| Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods | |
| Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods | |
| Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods | |
| Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods | |
| Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods | |
| Classes of fire-retardant treated wood products in interior and exterior end use applications - Reaction to fire performance; German and English version prEN 16755:2025 | |
| Components for slings - Safety - Part 1: Forged steel components, Grade 8 (includes Amendment A1:2008) | |
| Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 (includes Amendment A1:2008) | |
| Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8; Corrigendum 1 to English version of DIN EN 1677-2:2008-06 | |
| Components for slings - Safety - Part 3: Forged steel self-locking hooks, Grade 8 (includes Amendment A1:2008) | |
| Components for slings - Safety - Part 3: Forged steel self-locking hooks, Grade 8; Corrigendum 1 to English version of DIN EN 1677-3:2008-06 | |
| Components for slings - Safety - Part 4: Links, Grade 8 (includes Amendment A1:2008) | |
| Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 (includes Amendment A1:2008) | |
| Conservation of cultural heritage - Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage | |
| Conservation of Cultural Heritage - Guidelines to characterize natural stone used in cultural heritage | |
| Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage | |
| Conservation of Cultural Heritage - Surface protection for porous inorganic materials - Laboratory test methods for the evaluation of the performance of water repellent products | |
| Conservation of cultural heritage - Transport methods | |
| Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air | |
| Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps | |
| Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test | |
| Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test | |
| Construction products - Assessment of release of dangerous substances - Terminology; Trilingual version EN 16687:2015 | |
| Controlled environment storage cabinet for processed thermolabile endoscopes | |
| Copper and copper alloys - Declarations of conformity | |
| Dauerhaftigkeit von Holz und Holzprodukten - Bestimmung von Emissionen von mit Holzschutzmitteln behandeltem Holz an die Umwelt - Holzprodukte in Gebrauchsklasse 3 (nicht abgedeckt, ohne Erdkontakt) - Semi-Feldverfahren; Deutsche und... | |
| Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact | |
| Domestic swimming pools - Part 1: General requirements including safety and test methods | |
| Domestic swimming pools - Water systems - Part 3: Water treatment - Requirements | |
| Duengemittel - Bestimmung von N-(n-Butyl)thiophosp horsaeuretriamid (NBPT) und N-(n-Propyl)thiophos phorsaeuretriamid (NPPT) - Verfahren mit Hochleistungs-Fluess igchromatographie (HPLC); Deutsche Fassung EN 16651:2015 | |
| Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications | |
| Einzelteile fuer Anschlagmittel - Sicherheit - Teil 6: Einzelglieder - Gueteklasse 4; Deutsche Fassung EN 1677-6:2001+A1:2008 | |
| Emission safety of combustible air fresheners - Methodology for the assessment of test results and application of recommended emission limits | |
| Emissionssicherheit brennbarer Lufterfrischer - Testverfahren; Deutsche Fassung EN 16738:2015 | |
| Emissionssicherheit brennbarer Lufterfrischer - Verbraucherschutzinf ormationen; Deutsche Fassung EN 16740:2015 | |
| Energetic materials for defence - Safety, vulnerability - Friability | |
| Erdgas und Biomethan zur Verwendung im Transportwesen und Biomethan zur Einspeisung ins Erdgasnetz - Teil 1: Festlegungen fuer Biomethan zur Einspeisung ins Erdgasnetz; Deutsche Fassung EN 16723-1:2016 | |
| Erdgas und Biomethan zur Verwendung im Transportwesen und Biomethan zur Einspeisung ins Erdgasnetz - Teil 1: Festlegungen fuer Biomethan zur Einspeisung ins Erdgasnetz; Deutsche Fassung prEN 16723-1:2014 | |
| Erhaltung des kulturellen Erbes - Glossar fuer Mauermoertel und Putzmoertel zur Verwendung am kulturellen Erbe; Deutsche Fassung EN 16572:2015 | |
| Erhaltung des kulturellen Erbes - Reinigung von poroesen anorganischen Materialien - Laserstrahlreinigung sverfahren fuer kulturelles Erbe; Deutsche Fassung EN 16782:2016 | |
| Essig - Isotopenanalyse von Essigsaeure und Wasser - Teil 1: 2 H-NMR-Analyse von Essigsaeure; Deutsche Fassung EN 16466-1:2013 | |
| Essig - Isotopenanalyse von Essigsaeure und Wasser - Teil 2: 13 C-IRMS-Analyse von Essigsaeure; Deutsche Fassung EN 16466-2:2013 | |
| Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements | |
| Fan assisted radiators, convectors and trench convectors - Part 2: Test method and rating for thermal output | |
| Fenster und Tueren - Feuchte- und spritzwasserbestaend ige Tuerblaetter - Pruefungen und Klassifizierung; Deutsche Fassung EN 16580:2015 | |
| Feuerstellen fuer fluessige Brennstoffe - Dekorative Geraete, die unter Verwendung eines Alkohol basierten fluessigen oder gelfoermigen Brennstoffes eine Flamme erzeugen - Nutzung im privaten Haushaltbereich; Deutsche Fassung EN 16647:2015 | |
| Feuerwehrhelme - Helme fuer technische Rettung; Deutsche Fassung EN 16473:2014 | |
| Feuerwehrhelme - Helme fuer Wald- und Flaechenbrandbekaemp fung; Deutsche Fassung EN 16471:2014 | |
| Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance | |
| Fluessige Mineraloelerzeugniss e - Bestimmung des Gehalts von Natrium, Kalium, Calcium, Phosphor, Kupfer, Zink in Dieselkraftstoffen - Direkte Bestimmung durch optische Emmisionsspektrometr ie mit induktiv gekoppeltem Plasma (ICP OES); Deutsche... | |
| Fluessige Mineraloelerzeugniss e - Bestimmung des Zuendverzugs und der abgeleiteten Cetanzahl (ACZ) von Kraftstoffen aus Mitteldestillaten - Bestimmung des Zuendverzugs und des Verbrennungsverzugs in einer Verbrennungskammer mit konstantem Volumen und... | |
| Fluessiggas-Geraete und Ausruestungsteile - Ortsbewegliche, wiederbefuellbare Flaschen fuer Fluessiggas (LPG), ausgenommen geschweisste und hartgeloetete Stahlflaschen - Wiederkehrende Inspektion; Deutsche Fassung EN 16728:2016+A2:2020/A C:2024 | |
| Fluessiggas-Geraete und Ausruestungsteile - Ortsbewegliche, wiederbefuellbare Flaschen fuer Fluessiggas (LPG), ausgenommen geschweisste und hartgeloetete Stahlflaschen - Wiederkehrende Inspektion; Deutsche Fassung EN 16728:2016 | |
| Fluessiggas-Geraete und Ausruestungsteile - Ortsbewegliche, wiederbefuellbare Flaschen fuer Fluessiggas (LPG), ausgenommen geschweisste und hartgeloetete Stahlflaschen - Wiederkehrende Inspektion; Deutsche und Englische Fassung prEN 16728:2025 | |
| Fluessiggas-Geraete und Ausruestungsteile - Sicherheitsventile fuer Druckbehaelter fuer Fluessiggas (LPG) - Anforderungen an die Instandsetzung; Deutsche Fassung EN 16631:2015 | |
| Flugverkehrsmanageme nt - Informationssicherhe it fuer Organisationen im Bereich der Zivilluftfahrt; Deutsche und Englische Fassung EN 16495:2019 | |
| Food analysis - Determination of acrylamide in food by liquid chromatography tandem mass spectrometry (LC-ESI-MS/MS) | |
| Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by gas chromatography mass spectrometry (GC-MS) | |
| Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements | |
| Food processing machinery - Basic concepts - Part 1: Safety requirements | |
| Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009) | |
| Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009) | |
| Food processing machinery - Rotary rack ovens - Safety and hygiene requirements; German and English version EN 1673:2020/prA1:2024 | |
| Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements | |
| Furniture - Assessment of the surface resistance to microscratching | |
| Gas infrastructure - Quality of gas - Group H | |
| Gasflaschen - Wiederkehrende Inspektion und Pruefung, im Einbauzustand (ohne Demontage), von wiederbefuellbaren nahtlosen Grossflaschen aus Stahl mit einem Fassungsraum zwischen 150 l und 3 000 l fuer verdichtete Gase; Deutsche... | |
| Gasinfrastruktur - Beschaffenheit von Gas - Gruppe H; Deutsche Fassung prEN 16726:2014 | |
| Geblaeseunterstuetzt e Heizkoerper, Konvektoren und Unterflurkonvektoren - Teil 3: Pruefverfahren und Bewertung der Kuehlleistung; Deutsche Fassung EN 16430-3:2014 | |
| Giessereiwesen - Gusseisen-Strangguss ; Deutsche Fassung EN 16482:2014 | |
| Glas im Bauwesen - Bestimmung des Belastungswiderstand es von Glasscheiben durch Berechnung; Deutsche Fassung EN 16612:2019 | |
| Glas im Bauwesen - Lackiertes Glas fuer den Innenbereich - Teil 1: Anforderungen; Deutsche Fassung EN 16477-1:2016 | |
| Glas im Bauwesen - Verbundglas und Verbundsicherheitsgl as - Bestimmung der viskoelastischen Eigenschaften von Zwischenschichten; Deutsche Fassung EN 16613:2019 | |
| Glas im Bauwesen - Verbundglas und Verbundsicherheitsgl as - Bestimmung der viskoelastischen Eigenschaften von Zwischenschichten; Deutsche und Englische Fassung prEN 16613:2024 | |
| Gummi- und Kunststoff-Schlaeuch e und -Schlauchleitungen mit und ohne Einlage zur Verwendung mit Propan, Butan und deren Gemische in der Gasphase - Teil 2: Schlauchleitungen; Deutsche Fassung EN 16436-2:2018 | |
| Haeusliche Feuerstaetten fuer feste Brennstoffe - Teil 2-2: Kamineinsaetze einschliesslich offene Kamine; Deutsche Fassung EN 16510-2-2:2022 | |
| Haeusliche Feuerstaetten fuer feste Brennstoffe - Teil 2-6: Mechanisch mit Holzpellets beschickte Raumheizer, Einsaetze und Herde; Deutsche Fassung EN 16510-2-6:2022 | |
| Health risk assessment of chemicals - Requirements for the provision of training | |
| Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) Corrigendum 1 to English version of DIN EN 1662:1998-02 | |
| Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) | |
| Holz und Holzprodukte - Berechnung des biogenen Kohlenstoffgehalts im Holz und Umrechnung in Kohlenstoffdioxid; Deutsche Fassung EN 16449:2014 | |
| Holz und Holzprodukte - Bestimmung des gesamten organischen Kohlenstoffs (TOC) in Holz und Holzprodukten; Deutsche Fassung EN 16718:2015 | |
| Holzbauwerke - Pruefverfahren - Bestimmung des Langzeitverhaltens beschichteter und unbeschichteter stiftfoermiger Verbindungsmittel; Deutsche Fassung EN 16784:2016 | |
| Holztreppen - Bauplanung - Berechnungsmethoden; Deutsche Fassung EN 16481:2014 | |
| In vitro diagnostic systems - Culture media for microbiology: Terminology | |
| Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends | |
| Industrial valves - Steel and cast iron check valves | |
| Industriearmaturen - Anforderungen und Pruefungen fuer Metallarmaturen als drucktragende Ausruestungsteile; Deutsche Fassung EN 16668:2016 | |
| Industriearmaturen - Anforderungen und Pruefungen fuer Metallarmaturen als drucktragende Ausruestungsteile; Deutsche und Englische Fassung prEN 16668:2022 | |
| Information technology - Notification of RFID - The information sign and additional information to be provided by operators of RFID application systems | |
| Information technology - Radio frequency identification for item management - RFID Emblem (ISO/IEC 29160:2012, modified) | |
| Informationstechnik - Verfahren zur Datenschutzfolgenabs chaetzung (PIA) von RFID; Deutsche Fassung EN 16571:2014 | |
| Innere Abschluesse - Schutz vor Strangulationsgefahr en - Anforderungen und Pruefverfahren fuer Sicherheitseinrichtu ngen; Deutsche Fassung EN 16434:2014 | |
| Innere Abschluesse - Schutz vor Strangulationsgefahr en - Pruefverfahren; Deutsche Fassung EN 16433:2014 | |
| Instandhaltung - Instandhaltung im Rahmen des Anlagenmanagements; Deutsche Fassung EN 16646:2014 | |
| Intelligent transport systems - ESafety - ECall end to end conformance testing | |
| Keramische Sanitaerausstattungs gegenstaende - Beurteilung der Nachhaltigkeit; Deutsche Fassung EN 16578:2016 | |
| Kosmetische Mittel - Analysenmethoden - GC/MS-Methode fuer die Identifizierung und die Quantifizierung von 12 Phthalaten in zur direkten Injektion geeigneten Proben kosmetischer Mittel; Deutsche Fassung EN 16521:2014 | |
| Kraftstoffe fuer Kraftfahrzeuge - Bestimmung des Gehaltes an Mangan und Eisen in Dieselkraftstoff - Optische Emissionsspektrometr ie mit induktiv gekoppeltem Plasma (ICP OES); Deutsche Fassung EN 16576:2014 | |
| Kraftstoffe fuer Kraftfahrzeuge - Bestimmung des Methanolgehalts in Ethanolkraftstoff (E85) mittels Gaschromatographie - Teil 1: Einsaeulenverfahren; Deutsche Fassung EN 16761-1:2015 | |
| Kraftstoffe fuer Kraftfahrzeuge - Kraftstoff Fettsaeure-Methylest er (FAME) und Mischungen mit Dieselkraftstoff - Bestimmung der Oxidationsstabilitae t mittels beschleunigterem Oxidationsverfahren bei 120 \xb0C; Deutsche Fassung prEN 16568:2013 | |
| Kraftstoffe fuer Kraftfahrzeuge - Mischungen von Fettsaeure-Methylest ern (FAME) mit Dieselkraftstoff - Bestimmung der Oxidationsstabilitae t mittels beschleunigterem Oxidationsverfahren bei 120 °C; Deutsche Fassung EN 16568:2014 | |
| Kreiselpumpen - Abnahmepruefung fuer Packungen; Deutsche Fassung EN 16752:2015 | |
| Kunststoffe - Verfahren zur kuenstlich beschleunigten Alterung bei Verwendung von Quecksilberdampflamp en; Deutsche Fassung EN 16472:2014 | |
| Kupfer- und Kupferlegierungen - Baender fuer Federn und Steckverbinder; Deutsche Fassung EN 1654:1997 | |
| Kupfer- und Kupferlegierungen - Platten, Bleche, Baender, Streifen und Ronden zur allgemeinen Verwendung; Deutsche Fassung EN 1652:1997 | |
| Land- und Forstmaschinen - Mobile Seilgeraete fuer den Holztransport - Sicherheit; Deutsche Fassung EN 16517:2021 | |
| Lebensmittelanalytik - Bestimmung von Furan in Kaffee und Kaffee-Erzeugnissen mit Headspace-Gaschromat ographie und Massenspektrometrie (HS GC-MS); Deutsche Fassung EN 16620:2015 | |
| Leder - Anforderungen an die Bestimmung der Herkunft von Leder; Deutsche Fassung EN 16484:2015 | |
| Leder - Etikettierung der Lederausstattung in textilen Erzeugnissen; Deutsche Fassung EN 16483:2014 | |
| Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans | |
| Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans | |
| Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety; German and English version prEN 1647:2024 | |
| Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety (includes Amendment A1:2008) | |
| Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety; German and English version prEN 1645-1:2024 | |
| Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety (includes Amendment A1:2008) | |
| Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety; German and English version prEN 1646-1:2024 | |
| Leisure accommodation vehicles - Motor caravans - Part 2: User payload | |
| Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) | |
| Lokale Absaugeinrichtungen im Labor - Gelenkabsaugarm - Teil 2: Inbetriebnahme und Vor-Ort Pruefverfahren; Deutsche und Englische Fassung prEN 16589-2:2025 | |
| Lokale Absaugeinrichtungen im Labor - Teil 1: Allgemeine Anforderungen und Baumusterpruefverfah ren fuer Absaugarme mit Gelenken; Deutsche Fassung EN 16589-1:2022 | |
| LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures | |
| LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions | |
| Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements | |
| Maschinen fuer handwerklich hergestelltes Eis und Speiseeis - Bestimmung von Leistungsmerkmalen und Energieaufnahme; Deutsche Fassung EN 16754:2016 | |
| Maschinen zum Verdichten von Abfaellen oder recyclebaren Materialien - Verdichter - Sicherheitsanforderu ngen; Deutsche Fassung EN 16486:2014 | |
| Mechanische Produkte - Methodik zur Verminderung der Umweltauswirkungen bei Produktgestaltung und Entwicklung; Deutsche Fassung EN 16524:2020 | |
| Modulare mechanisch verriegelnde Bodenbelaege (MMF) - Spezifikation, Anforderungen und Pruefverfahren fuer mehrschichtige modulare Paneele fuer die schwimmende Verlegung; Deutsche und Englische Fassung EN 16511:2023/prA1:2024 | |
| Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods; German and English version prEN 16510-2-10:2025 | |
| Nachhaltigkeit im Weltraum - Uebernahmebemerkung zu ISO 24113: Space systems - Space debris mitigation requirements; Deutsche und Englische Fassung EN 16604-10:2014 | |
| Nahrungsmittelmaschi nen - Teigausrollmaschinen - Sicherheits- und Hygieneanforderungen ; Deutsche Fassung EN 1674:2000+A1:2009 | |
| Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification | |
| Non-destructive testing - Thermographic testing - Part 3: Terms and definitions | |
| Ortsbewegliche Gasflaschen - Nicht wiederbefuellbare kleine ortsbewegliche Flaschen aus Stahl mit einem Fassungsraum bis einschliesslich 120 ml fuer verdichtete oder verfluessigte Gase (Kompaktflaschen) - Auslegung, Bau, Fuellung und Pruefung; Deutsche... | |
| Ortsfeste Regalsysteme aus Stahl - Verstellbare Palettenregale - Leitsaetze fuer die erdbebensichere Bemessung; Deutsche Fassung EN 16681:2016 | |
| Osteopathic healthcare provision | |
| Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap | |
| Packaging - Rigid plastic containers - PET finish 26/22 (12,0) | |
| Packaging - Rigid plastic containers - PET finish BVS 30H60 | |
| Packaging - Tamper verification features for medicinal product packaging | |
| Paints and varnishes - Evalutation of the surface disfigurement caused by fungi and algae on coatings | |
| Paneele fuer schwimmende Verlegung - Halbstarre, mehrlagige, modulare Fussbodenbelaege (MMF) mit abriebbestaendiger Decklage; Deutsche Fassung EN 16511:2014 | |
| Paragliding equipment - Harnesses - Safety requirements and strength tests; German and English version prEN 1651:2025 | |
| Permanently installed outdoor fitness equipment - Safety requirements and test methods; German and English version prEN 16630:2025 | |
| Permanently installed outdoor fitness equipment - Safety requirements and test methods | |
| Personal eye protection - Optical test methods | |
| Personal eye protection - Specifications; English version of DIN EN 166 | |
| Personal eye protection - Vocabulary | |
| Pest management services - Requirements and competences | |
| Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking | |
| Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering | |
| Plastics and rubber machines - Tyre curing machines - Safety requirements; German and English version prEN 16474:2023 | |
| Plastics and rubber machines - Tyre curing presses - Safety requirements | |
| Playing field equipment - Lightweight goals - Functional, safety requirements and test methods | |
| Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods; German and English version prEN 16579:2025 | |
| Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 3: Low and medium expansion hand-held foam branchpipes PN 16 | |
| Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN 16 | |
| Pressure sewerage systems outside buildings | |
| Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified) | |
| Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread (ISO 12126:1997, modified) | |
| Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified) | |
| Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified) | |
| Professional indoor UV exposure services - Part 2: Required qualification and competence of the indoor UV exposure consultant | |
| Professional indoor UV exposure services - Part 3: Requirements for the provision of services | |
| Professionelle Dienstleistungen in Sonnenstudios - Teil 1: Anforderungen an die Bereitstellung von Ausbildungsdienstlei stungen; Deutsche Fassung EN 16489-1:2014 | |
| Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue | |
| Pumps - Minimum required efficiency of rotodynamic water pumps | |
| Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for... | |
| Railway applications - Ballastless track systems - Part 4: Special ballastless track systems for attenuation of vibration; German and English version prEN 16432-4:2024 | |
| Railway applications - Call for aid and communication device - Requirements | |
| Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving | |
| Railway applications - Design for PRM use - General requirements - Part 1: Contrast | |
| Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure | |
| Railway applications - Ground based service - Diesel refuelling equipment | |
| Railway applications - Infrastructure - Aluminothermic welding of grooved rails | |
| Railway applications - Infrastructure - Hollow sleepers and bearers; German and English version prEN 16431:2024 | |
| Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains... | |
| Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles | |
| Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 2: Eddy current testing of rails in track | |
| Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects | |
| Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 5: Non-destructive testing on welds in track | |
| Railway applications - Track - Concrete sleepers and bearers with under sleeper pads; German and English version prEN 16730:2025 | |
| Railway applications - Track - Concrete sleepers and bearers with under sleeper pads | |
| Railway applications - Track - Hollow sleepers and bearers | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound Propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-2: Mechanical performance under dynamic loadings caused by passing trains... | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and environmental requirements | |
| Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites | |
| Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS) | |
| Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers | |
| Railway applications - Track - Safety protection on the track during work - Part 3: Competences for personnel related to work on or near tracks | |
| Raumfahrt - Galileo Timing Receiver - Funktions- und Leistungsanforderung en und zugehoerige Tests; Deutsche Fassung EN 16605:2024 | |
| Raumfahrt - Galileo Timing Receiver - Funktions- und Leistungsanforderung en und zugehoerige Tests; Deutsche und Englische Fassung prEN 16605:2024 | |
| Raumfahrt - Ueberwachung der Weltraumlageerfassun g - Teil 30-03: Beobachtungssystembe schreibungs-Nachrich t (OSDM); Deutsche Fassung EN 16604-30-03:2020 | |
| Raumfahrtproduktsich erung - Anforderungen fuer die Nutzung von COTS-Komponenten; Englische Fassung EN 16602-60-13:2015 | |
| Raumfahrtproduktsich erung - Beschaffung von Leiterplatten; Englische Fassung EN 16602-70-11:2015 | |
| Raumfahrtproduktsich erung - Bestimmung der Anfaelligkeit von silberbeschichtetem Kupferdraht und -kabeln fuer "red-plague"-Korrosi on; Englische Fassung EN 16602-70-20:2014 | |
| Raumfahrtproduktsich erung - Brennverhaltenstest fuer die Auswahl von Raumfahrtmaterialien ; Englische Fassung EN 16602-70-21:2014 | |
| Raumfahrtproduktsich erung - Designregeln fuer Leiterplatten; Englische Fassung EN 16602-70-12:2016 | |
| Raumfahrtproduktsich erung - Detektion von organischen Kontaminationen auf Oberflaechen mit Infrarotspektroskopi e; Englische Fassung EN 16602-70-05:2014 | |
| Raumfahrtproduktsich erung - Entwicklung von ASIG und FPGA; Englische Fassung EN 16602-60-02:2014 | |
| Raumfahrtproduktsich erung - Ermittlung der Schael- und Abziehfestigkeit von Ueberzuegen und Beschichtungen unter Anwendung von Haftbaendern; Englische Fassung EN 16602-70-13:2015 | |
| Raumfahrtproduktsich erung - Hochzuverlaessiges Loeten von Oberflaechen-Befesti gungen und gemischte Technologien; Englische Fassung EN 16602-70-38:2019 | |
| Raumfahrtproduktsich erung - Kompatibilitaetstest s fuer Material und Hardware in Sterilisationsprozes sen; Englische Fassung EN 16602-70-53:2015 | |
| Raumfahrtproduktsich erung - Kontrolle der Gesamtkeimzahl in Reinraeumen; Englische Fassung EN 16602-70-58:2015 | |
| Raumfahrtproduktsich erung - Kontrolle von kritischen Teilen; Englische Fassung EN 16602-10-04:2014 | |
| Raumfahrtproduktsich erung - Korrosion; Englische Fassung EN 16602-70-14:2018 | |
| Raumfahrtproduktsich erung - Kriterien fuer die Werkstoffwahl zur Vermeidung von Spannungsrisskorrosi on; Englische Fassung FprEN 16602-70-36:2013 | |
| Raumfahrtproduktsich erung - Lagerung, Handhabung und Transport von Raumfahrzeug-Hardwar e; Englische Fassung EN 16602-20-08:2016 | |
| Raumfahrtproduktsich erung - Management der Produktsicherung; Englische Fassung EN 16602-10:2017 | |
| Raumfahrtproduktsich erung - Manuelles Loeten von hoch-zuverlaessigen elektrischen Verbindungen; Englische Fassung EN 16602-70-08:2015 | |
| Raumfahrtproduktsich erung - Mechanische Tests von metallenem Material; Englische Fassung EN 16602-70-45:2014 | |
| Raumfahrtproduktsich erung - Prozess- und Qualitaetssicherungs anforderungen fuer das Hartloeten von Metallen fuer Flughardware; Englische Fassung EN 16602-70-40:2023 | |
| Raumfahrtproduktsich erung - Qualifizierung und Beschaffung von Leiterplatten; Englische Fassung EN 16602-70-60:2019, nur auf CD-ROM | |
| Raumfahrtproduktsich erung - Reduktion der Gesamtkeimzahl bei Dampfphase fuer Flughardware; Englische Fassung EN 16602-70-56:2015 | |
| Raumfahrtproduktsich erung - Software-Produktsich erung; Englische Fassung EN 16602-80:2018 | |
| Raumfahrtproduktsich erung - Thermo-Vakuum-Ausgas ungstest fuer die Auswahl von Raumfahrtmaterialien ; Englische Fassung EN 16602-70-02:2014 | |
| Raumfahrtproduktsich erung - Ueberwachung der Teilchenkontaminatio n von Raumfahrzeugsystemen und Reinraeumen; Englische Fassung EN 16602-70-50:2015 | |
| Raumfahrtproduktsich erung - Ultra-Reinigung von Flug-Hardware; Englische Fassung EN 16602-70-54:2019 | |
| Raumfahrtproduktsich erung - Verfuegbarkeitsanaly se; Englische Fassung EN 16602-30-09:2014 | |
| Raumfahrtproduktsich erung - Vorbereitung, Zusammenbau und Befestigung von RF-Koaxial-Kabeln; Englische Fassung EN 16602-70-18:2014 | |
| Raumfahrtproduktsich erung - Werkstoffe, Prozesse und Angaben zu ihrer Auswahl; Englische Fassung EN 16602-70-71:2016 | |
| Raumfahrtproduktsich erung - Wiederbelebungsproze duren fuer EEE-Komponenten; Englische Fassung EN 16602-60-14:2014 | |
| Raumfahrtproduktsich erung - Zuverlaessigkeit; Englische Fassung EN 16602-30:2018 | |
| Raumfahrttechnik - Allgemeine Anforderungen an das Systemengineering; Englische Fassung EN 16603-10:2018 | |
| Raumfahrttechnik - Anforderungen an Satelliten-AOCS; Englische Fassung EN 16603-60-30:2015 | |
| Raumfahrttechnik - ASIC, FPGA und IP-Kern Entwicklung; Englische Fassung EN 16603-20-40:2023 | |
| Raumfahrttechnik - Ausruestung fuer Zwei-Phasen-Waermetr ansport; Englische Fassung EN 16603-31-02:2015 | |
| Raumfahrttechnik - Bezugskoordinatensys tem; Englische Fassung EN 16603-10-09:2014 | |
| Raumfahrttechnik - Bodensysteme und Bodenbetrieb - Ueberwachung und Definitionen zu Steuerdaten; Englische Fassung EN 16603-70-31:2015 | |
| Raumfahrttechnik - Bodensysteme und Bodenbetrieb; Englische Fassung EN 16603-70:2015 | |
| Raumfahrttechnik - Bordseitige Kontrollprozeduren; Englische Fassung EN 16603-70-01:2015 | |
| Raumfahrttechnik - Definition des Technologie-Reifegra des (TRL) und der Beurteilungskriterie n (ISO 16290:2013, modifiziert); Deutsche Fassung EN 16603-11:2019 | |
| Raumfahrttechnik - Elektrik und Elektronik; Englische Fassung EN 16603-20:2020 | |
| Raumfahrttechnik - Entfernungsbestimmun g und Dopplerverfolgung; Englische Fassung EN 16603-50-02:2014 | |
| Raumfahrttechnik - Funkfrequenzen und -modulation; Englische Fassung EN 16603-50-05:2014 | |
| Raumfahrttechnik - Glossar; Englische Fassung EN 16601-00-01:2015 | |
| Raumfahrttechnik - Mechanik/Mechanismen ; Englische Fassung EN 16603-33-01:2019 | |
| Raumfahrttechnik - Reihe EN 16600 - Beschreibung, Implementierung und allgemeine Anforderungen; Englische Fassung EN 16601-00:2019 | |
| Raumfahrttechnik - Schnittstellenmanage ment; Englische Fassung EN 16603-10-24:2017 | |
| Raumfahrttechnik - SpaceWire - Verbindungen, Knoten, Router und Netzwerke; Englische Fassung EN 16603-50-12:2020 | |
| Raumfahrttechnik - SpaceWire Protokoll zur Identifikation; Englische Fassung EN 16603-50-51:2014 | |
| Raumfahrttechnik - Sprache fuer Test- und Bedienprozeduren; Englische Fassung EN 16603-70-32:2014 | |
| Raumfahrttechnik - Steuerungsleistung; Englische Fassung EN 16603-60-10:2014 | |
| Raumfahrttechnik - Teil 20-08: Fotovoltaische Baugruppen und Komponenten; Englische Fassung EN 16603-20-08:2014 | |
| Raumfahrttechnik - Teil 40: Software; Englische Fassung EN 16603-40:2014 | |
| Raumfahrttechnik - Telemetrie und Telekommando; Englische Fassung EN 16603-70-41:2017, nur auf CD-ROM | |
| Raumfahrttechnik - Terminologie und Leistungsspezifikati on fuer Sternensensoren; Englische Fassung EN 16603-60-20:2014 | |
| Raumfahrttechnik - Verifikation; Englische Fassung EN 16603-10-02:2018 | |
| Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering | |
| Residential solid fuel burning appliances - Part 1: General requirements and test methods | |
| Residential solid fuel burning appliances - Part 2-10: Multi-firing sauna stoves fired by natural wood logs | |
| Residential solid fuel burning appliances - Part 2-1: Roomheaters | |
| Residential solid fuel burning appliances - Part 2-3: Cookers | |
| Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW | |
| Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances; German and English version prEN 16510-2-5:2023 | |
| Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances | |
| Residential solid fuel burning appliances - Part 2-7: Combination appliances fired by wood logs and pellets; German and English version prEN 16510-2-7:2023 | |
| Residential solid fuel burning appliances - Part 2-7: Combination appliances fired by wood logs and pellets | |
| Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification | |
| Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements; English version EN 16661:2015 | |
| Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification | |
| Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings | |
| Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method | |
| Rueckschlagklappen zur explosionstechnische n Entkopplung; Deutsche Fassung EN 16447:2014 | |
| Rueckschlagklappen zur explosionstechnische n Entkopplung; Deutsche und Englische Fassung prEN 16447:2025 | |
| Rund- und Schnittholz - Umweltproduktdeklara tionen - Produktkategorierege ln fuer Holz und Holzwerkstoffe im Bauwesen; Deutsche Fassung EN 16485:2014 | |
| Sachverstaendigentae tigkeiten - Allgemeine Anforderungen an Sachverstaendigenlei stungen; Deutsche Fassung EN 16775:2015 | |
| Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa | |
| Schloesser und Baubeschlaege - Korrosionsbestaendig keit - Anforderungen und Pruefverfahren; Deutsche Fassung EN 1670:2007, Berichtigung zu DIN EN 1670:2007-06; Deutsche Fassung EN 1670:2007/AC:2008 | |
| Schloesser und Baubeschlaege - Korrosionsbestaendig keit - Anforderungen und Pruefverfahren; Deutsche Fassung EN 1670:2007 | |
| Schutzhandschuhe - Bestimmung von Dimethylformamid in Handschuhen; Deutsche Fassung EN 16778:2016 | |
| Schwimmbaeder fuer private Nutzung - Teil 2: Besondere Anforderungen einschliesslich sicherheitstechnisch er Anforderungen und Pruefverfahren fuer in den Boden eingelassene Schwimmbaeder; Deutsche Fassung EN 16582-2:2015 | |
| Schwimmbaeder fuer private Nutzung - Teil 3: Besondere Anforderungen einschliesslich sicherheitstechnisch er Anforderungen und Pruefverfahren fuer auf dem Boden aufgestellte Schwimmbaeder; Deutsche Fassung EN 16582-3:2015 | |
| Schwimmbaeder fuer private Nutzung - Wassersysteme - Teil 1: Filtrationssysteme - Anforderungen und Pruefverfahren; Deutsche Fassung EN 16713-1:2016 | |
| Schwimmbaeder fuer private Nutzung - Wassersysteme - Teil 2: Umwaelzsysteme - Anforderungen und Pruefverfahren; Deutsche Fassung EN 16713-2:2016 | |
| Sechskantmuttern mit Flansch (ISO/DIS 4161:1996, modifiziert); Deutsche Fassung EN 1661:1997 | |
| Sechskantschrauben mit Flansch, schwere Reihe; Deutsche Fassung EN 1665:1997, Berichtigungen zu DIN EN 1665:1998-11; Deutsche Fassung EN 1665:1997/AC:2007 | |
| Sechskantschrauben mit Flansch, schwere Reihe; Deutsche Fassung EN 1665:1997 | |
| Services for fire safety systems and security systems | |
| Sicherheit von Holzbearbeitungsmasc hinen - Absauganlagen fuer Holzstaub und Spaene fuer Innenaufstellung - Sicherheitstechnisch e Anforderungen; Deutsche Fassung EN 16770:2018 | |
| Sicherheit von Maschinen - Sicherheitsanforderu ngen an Stahlkonverter und zugehoerige Einrichtungen; Deutsche Fassung EN 16774:2016 | |
| Sicherheitsdienstlei stungen fuer Seeschifffahrt und Seehaefen; Deutsche Fassung EN 16747:2015 | |
| Siliko-Calciumstaub fuer Beton - Definitionen, Anforderungen und Konformitaetskriteri en; Deutsche Fassung EN 16622:2015 | |
| Slide fasteners (zips) - Specification; German and English version prEN 16732:2024 | |
| Slide fasteners (zips) - Specification | |
| Space engineering - Adhesive bonding for spacecraft and launcher applications; English version EN 16602-70-16:2021 | |
| Space engineering - Adoption Notice of CCSDS 131.0-B-3, TM Synchronization and Channel Coding; English version EN 16603-50-21:2022 | |
| Space engineering - Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link Protocol; English version EN 16603-50-22:2022 | |
| Space engineering - Adoption Notice of CCSDS 231.0-B-3, TC Synchronization and Channel Coding; English version EN 16603-50-24:2022 | |
| Space engineering - Adoption Notice of CCSDS 232.0-B-3, TC Space Data Link Protocol; English version EN 16603-50-25:2022 | |
| Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation Procedure-1; English version EN 16603-50-26:2022 | |
| Space engineering - Adoption Notice of CCSDS 732.0-B-3, AOS Space Data Link Protocol; English version EN 16603-50-23:2022 | |
| Space engineering - CANbus extention protocol; English version EN 16603-50-15:2017 | |
| Space engineering - Cleanliness requirements for spacecraft propulsion hardware; English version EN 16603-35-06:2014 | |
| Space engineering - Communications; English version EN 16603-50:2014 | |
| Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems; English version EN 16603-35-10:2014 | |
| Space engineering - Electrical design and interface requirements for power supply; English version EN 16603-20-20:2018 | |
| Space engineering - Electromagnetic compatibility; English version EN 16603-20-07:2014 | |
| Space engineering - Exchange of thermal analysis data; English version EN 16603-31-04:2019 | |
| Space engineering - Explosive subsystems and devices; English version EN 16603-33-11:2019 | |
| Space engineering - Fracture control; English version EN 16603-32-01:2014 | |
| Space engineering - Gyros terminology and performance specification; English version EN 16603-60-21:2018 | |
| Space engineering - Human factors engineering; English version EN 16603-10-11:2014 | |
| Space engineering - Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft; English version EN 16603-50-13:2014 | |
| Space engineering - Interface requirements for electrical actuators; English version EN 16603-20-21:2020 | |
| Space engineering - Liquid and electric propulsion for spacecraft; English version EN 16603-35-01:2014 | |
| Space engineering - Liquid propulsion for launchers; English version EN 16603-35-03:2014 | |
| Space engineering - Materials; English version EN 16603-32-08:2016 | |
| Space engineering - Method for the calculation of radiation received and its effects, and a policy for design margins; English version EN 16603-10-12:2014 | |
| Space engineering - Modal survey assessment; English version EN 16603-32-11:2014 | |
| Space engineering - Multipactor, design and test; English version EN 16603-20-01:2020 | |
| Space engineering - Part 10-06: Technical requirements specification | |
| Space engineering - Part 34: Environmental control and life support (ECLS); English version EN 16603-34:2014 | |
| Space engineering - Propulsion general requirements; English version EN 16603-35:2014 | |
| Space engineering - Simulation modelling platform; English version EN 16603-40-07:2020 | |
| Space engineering - Solid propulsion for spacecrafts and launchers; English version EN 16603-35-02:2014 | |
| Space engineering - Space data links - Telecommand protocols, synchronization and channel coding; English version EN 16603-50-04:2014 | |
| Space engineering - Space data links - Telemetry synchronization and channel coding; English version EN 16603-50-01:2014 | |
| Space engineering - Space data links - Telemetry transfer frame protocol; English version EN 16603-50-03:2014 | |
| Space engineering - Space environment; English version EN 16603-10-04:2015 | |
| Space engineering - Space segment operability; English version EN 16603-70-11:2015 | |
| Space engineering - Spacecraft charging; English version EN 16603-20-06:2014 | |
| Space engineering - Spacecraft discrete interfaces; English version EN 16603-50-14:2014 | |
| Space engineering - SpaceFibre - Very high-speed serial link; English version EN 16603-50-11:2020 | |
| Space engineering - SpaceWire - CCSDS packet transfer protocol; English version EN 16603-50-53:2015 | |
| Space engineering - SpaceWire - Remote memory access protocol; English version EN 16603-50-52:2014 | |
| Space engineering - Structural design and verification of pressurized hardware; English version EN 16603-32-02:2014 | |
| Space engineering - Structural factors of safety for spaceflight hardware; English version EN 16603-32-10:2014 | |
| Space engineering - Structural finite element models; English version EN 16603-32-03:2014 | |
| Space engineering - Structural general requirements; English version EN 16603-32:2014 | |
| Space engineering - Testing; English version EN 16603-10-03:2014 | |
| Space engineering - Thermal control general requirements; English version EN 16603-31:2014 | |
| Space produce assurance - Quality and safety assurance for space test centres; English version EN 16602-20-07:2016 | |
| Space product assurance - Application of paints and coatings on space hardware; English version EN 16602-70-31:2014 | |
| Space product assurance - Black-anodizing of metals with inorganic dyes; English version EN 16602-70-03:2014 | |
| Space product assurance - Cleanliness and contamination control; English version EN 16602-70-01:2014 | |
| Space product assurance - Control of limited shelf-life materials; English version EN 16602-70-22:2014 | |
| Space product assurance - Crimping of high-reliability electrical connections; English version EN 16602-70-26:2014 | |
| Space product assurance - Derating - EEE components; English version EN 16602-30-11:2014 | |
| Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs); English version EN 16602-60-12:2014 | |
| Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment; English version EN 16602-70-29:2014 | |
| Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking; English version EN 16602-70-37:2014 | |
| Space product assurance - Dry Heat Bioburden Reduction for Flight Hardware; English version EN 16602-70-57:2015 | |
| Space product assurance - Durability testing of coatings and surface finishes; English version EN 16602-70-17:2020 | |
| Space product assurance - Electrical, electronic and electromechanical (EEE) components; English version EN 16602-60:2015 | |
| Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA); English version EN 16602-30-02:2014 | |
| Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025; English version EN 16602-40-12:2014 | |
| Space product assurance - Generic procurement requirements for hybrids; English version EN 16602-60-05:2014 | |
| Space product assurance - Hazard analysis; English version EN 16602-40-02:2014 | |
| Space product assurance - High-reliability soldering for surface mount, mixed technology and hand-mounted electrical connections; English version EN 16602-70-61:2022 | |
| Space product assurance - Material selection for controlling stress-corrosion cracking; English version EN 16602-70-36:2014 | |
| Space product assurance - Materials, mechanical parts and processes; English version EN 16602-70:2016 | |
| Space product assurance - Measurements of thermo-optical properties of thermal control materials; English version EN 16602-70-09:2015 | |
| Space product assurance - Microbiological examination of flight hardware and cleanrooms; English version EN 16602-70-55:2015 | |
| Space product assurance - Non-destructive testing; English version EN 16602-70-15:2021 | |
| Space product assurance - Nonconformance control system; English version EN 16602-10-09:2014 | |
| Space product assurance - Off-the-shelf items utilization in space systems; English version EN 16602-20-10:2014 | |
| Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014 | |
| Space product assurance - Qualification of printed circuit boards; English version EN 16602-70-10:2015 | |
| Space product assurance - Quality assurance, English version EN 16602-20:2014 | |
| Space product assurance - Radiation hardness assurance - EEE components; English version EN 16602-60-15:2014 | |
| Space product assurance - Repair and modification of printed circuit board assemblies for space use; English version EN 16602-70-28:2014 | |
| Space product assurance - Requirements for manufacturing and procurement of threaded fasteners; English version EN 16602-70-46:2014 | |
| Space product assurance - Safety; English version EN 16602-40:2018 | |
| Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies; English version EN 16602-70-04:2014 | |
| Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies; English version FprEN 16602-70-04:2013 | |
| Space product assurance - Verification and approval of automatic machine wave soldering; English version EN 16602-70-07:2014 | |
| Space product assurance - Welding of metallic materials for flight hardware; English version EN 16602-70-39:2018 | |
| Space product assurance - Wire wrapping of high-reliability electrical connections; English version EN 16602-70-30:2014 | |
| Space project management - Part 10-01: Organization and conduct of reviews | |
| Space project management - Part 10: Project planning and implementation | |
| Space project management - Part 40: Configuration and information management | |
| Space project management - Part 60: Cost and schedule management | |
| Space project management - Part 80: Risk management | |
| Space sustainability - Planetary protection; English version EN 16604-20:2020 | |
| Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere | |
| Strassenfahrzeuge - Zusaetzliche Gleitschutzvorrichtu ngen fuer Reifen an Personenfahrzeugen und leichten Nutzfahrzeugen - Teil 1: Sicherheitstechnisch e Anforderungen und Pruefverfahren; Deutsche Fassung EN 16662-1:2020 | |
| Structural timber - Visual strength grading of tropical hardwood | |
| Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods | |
| Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements | |
| Systeme fuer die Renovierung von Abwasserkanaelen und -leitungen - Lining mit fest verankerter Kunststoffauskleidun g; Deutsche Fassung EN 16506:2014 | |
| Tanks fuer die Befoerderung gefaehrlicher Gueter - Bedienungsausruestun g von Tanks - Flammensperren fuer Belueftungseinrichtu ngen; Deutsche Fassung EN 16522:2014 | |
| Tanks fuer die Befoerderung gefaehrlicher Gueter - Transporttankausrues tung fuer Ueberfuellsicherunge n fuer ortsfeste Tanks; Deutsche Fassung EN 16657:2016 | |
| Temporaere Konstruktionen fuer Bauwerke - Einhausungskonstrukt ionen - Leistungsanforderung en, Entwurf, Konstruktion und Bemessung; Deutsche Fassung EN 16508:2015 | |
| Test method for the determination of the degree of soil acidity according to Baumann-Gully | |
| Test methods for nonwoven compresses for medical use - Part 1: Nonwovens used in the manufacture of compresses; German version EN 1644-1:1997 | |
| Test methods for nonwoven compresses for medical use - Part 2: Finished compresses; English version of DIN EN 1644-2 | |
| Testing methodologies for refrigerating devices for insulated means of transport - Part 2: Eutectic cooling devices | |
| Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device | |
| Textile Artikel fuer Saeuglinge und Kleinkinder - Sicherheitstechnisch e Anforderungen und Pruefverfahren fuer Kinderbettdecken - Teil 1: Bettdecken (ausgenommen Bettbezuege); Deutsche Fassung EN 16779-1:2018 | |
| Textile Artikel fuer Saeuglinge und Kleinkinder - Sicherheitstechnisch e Anforderungen und Pruefverfahren fuer Kinderschlafsaecke zur Nutzung in einem Babybett; Deutsche und Englische Fassung prEN 16781:2024 | |
| Textile Artikel fuer Saeuglinge und Kleinkinder - Sicherheitstechnisch e Anforderungen und Pruefverfahren fuer Kinderschlafsaecke; Deutsche Fassung EN 16781:2018 | |
| Textile child care articles - Safety requirements and test methods for children's cot bumpers | |
| Textile child care articles - Safety requirements and test methods for children's cot duvets - Part 2: Duvet covers (excluding duvet) | |
| Textile floor coverings - Guidelines for acceptable colour deviations | |
| Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion | |
| Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution | |
| Textilien - Bestimmung des Metallgehaltes - Teil 3: Bestimmung der Bleilaessigkeit mit Speichelsimulanzloes ung; Deutsche Fassung EN 16711-3:2019 | |
| Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations | |
| Thermal insulation products for building applications - Instructions for mounting and fixing for determination of the reaction to fire testing of external thermal insulation composite systems (ETICS) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) | |
| Tragbare Geraete zum Ausbringen von Loeschmitteln, die mit Feuerloeschpumpen gefoerdert werden - Tragbare Schaumgeraete - Teil 1: Zumischer PN 16; Deutsche Fassung EN 16712-1:2015 | |
| Traktoren und Maschinen fuer die Land- und Forstwirtschaft - Sicherheitsbezogene Teile von Steuerungen - Teil 2: Konzeptphase (ISO 25119-2:2010 modifiziert); Deutsche Fassung EN 16590-2:2014 | |
| Traktoren und Maschinen fuer die Land- und Forstwirtschaft - Sicherheitsbezogene Teile von Steuerungen - Teil 3: Serienentwicklung, Hardware, Software (ISO 25119-3:2010 modifiziert); Deutsche Fassung EN 16590-3:2014 | |
| Traktoren und Maschinen fuer die Land- und Forstwirtschaft - Sicherheitsbezogene Teile von Steuerungen - Teil 4: Fertigung, Betrieb, Modifikation und unterstuetzende Prozesse (ISO 25119-4:2010 modifiziert); Deutsche Fassung EN 16590-4:2014, Berichtigung... | |
| Transport platforms | |
| Valve proving systems for automatic shut-off valves for gas burners and gas appliances; English version of DIN EN 1643 | |
| Ventilation for buildings - Air diffusion - Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet | |
| Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumps | |
| Verfahren der Ergonomie - Teil 2: Eine Methode fuer die Arbeitsanalyse zur Unterstuetzung von Entwicklung und Design; Deutsche Fassung EN 16710-2:2016 | |
| Verpackung - Formstabile Kunststoffbehaelter - PET-Verschlussmundst ueck 29/25 (12,6); Deutsche Fassung EN 16592:2014 | |
| Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18 O-IRMS analysis of water in wine vinegar | |
| Vorhangfassaden - Bestimmung der Beanspruchbarkeit von auf Abscheren beanspruchten Verbindungen - Pruefverfahren und Anforderungen; Deutsche Fassung EN 16758:2016 | |
| Waermeuebertrager - Wasser-Luft-Ventilat orkonvektoren - Bestimmung des Schallleistungspegel s; Deutsche Fassung EN 16583:2015 | |
| Waermeuebertrager - Wasser-Luft-Ventilat orkonvektoren - Bestimmung des Schallleistungspegel s; Deutsche und Englische Fassung EN 16583:2022/prA1:2024 | |
| Wasserbeschaffenheit - Anleitung fuer die quantitative und qualitative Probenahme von Phytoplankton aus Binnengewaessern; Deutsche Fassung EN 16698:2015 | |
| Wasserbeschaffenheit - Anleitung fuer Verfahren zur Probenahme von Invertebraten in der hyporheischen Zone von Fluessen; Deutsche Fassung EN 16772:2016 | |
| Wasserbeschaffenheit - Anleitung zur Beurteilung der hydromorphologischen Merkmale der Uebergangs- und Kuestengewaesser; Deutsche Fassung EN 16503:2014 | |
| Wasserbeschaffenheit - Bestimmung von ausgewaehlten polycyclischen aromatischen Kohlenwasserstoffen (PAK) in Gesamtwasserproben - Verfahren mittels Festphasenextraktion (SPE) mit SPE-Disks in Verbindung mit Gaschromatographie-M assenspektrometrie (GC-MS); Deutsche | |
| Wasserbeschaffenheit - Bestimmung von Organochlorpestizide n (OCP) in Gesamtwasserproben - Verfahren mittels Festphasenextraktion (SPE) mit SPE-Disks in Verbindung mit Gaschromatographie-M assenspektrometrie (GC-MS); Deutsche Fassung EN 16693:2015 | |
| Wasserbeschaffenheit - Leistungsanforderung en und Konformitaetspruefun gen fuer Geraete zum Wassermonitoring - Automatische Probenahmegeraete fuer Wasser und Abwasser; Deutsche Fassung EN 16479:2014 | |
| Wasserbeschaffenheit - Leistungsanforderung en und Konformitaetspruefun gen fuer Geraete zum Wassermonitoring - Automatische Probenahmegeraete fuer Wasser und Abwasser; Deutsche und Englische Fassung prEN 16479:2021 | |
| Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS) | |
| Water quality - Guidance on the estimation of phytoplankton biovolume | |
| Water quality - Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys | |
| Zellstoff, Papier und Karton - Bestimmung von Phthalaten in Papier- und Kartonextrakten; Deutsche Fassung EN 16453:2014 | |
| Zerstoerungsfreie Pruefung - Thermografische Pruefung - Teil 1: Allgemeine Grundlagen; Deutsche Fassung EN 16714-1:2016 | |
| Zerstoerungsfreie Pruefung - Thermografische Pruefung - Teil 2: Geraete; Deutsche Fassung EN 16714-2:2016 |
| << Prev | Next >> |