Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
200
250
300
350
400
450
490
500
510
520
530
540
548
549
550
551
552
553
554
555
556
557
558
559
560
570
580
590
600
610
620
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Ablaeufe fuer Gebaeude - Teil 3: Gueteueberwachung; Deutsche Fassung EN 1253-3:1999 | |
| Ablaeufe fuer Gebaeude - Teil 6: Bodenablaeufe mit Geruchverschluss mit einer Sperrwasserhoehe von weniger als 50 mm; Deutsche Fassung EN 1253-6:2022 | |
| Ablaeufe fuer Gebaeude - Teil 7: Bodenablaeufe mit mechanischem Geruchverschluss; Deutsche Fassung EN 1253-7:2022 | |
| Ablaeufe fuer Gebaeude - Teil 8: Bodenablaeufe mit Geruchverschluss mit einer Kombination aus mechanischem Geruchverschluss und Sperrwasser; Deutsche Fassung EN 1253-8:2022 | |
| Acoustics - Noise test code for fastener driving tools - Engineering method (includes Amendment A1:2008) | |
| Adhesive tapes - Terminology; English version of DIN EN 12481 | |
| Adhesives - Determination of ash and sulphated ash | |
| Adhesives - Determination of pH - Test method | |
| Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics | |
| Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers; English version of DIN EN 12702 | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation of aqueous adhesives | |
| Adhesives for paper and board, packaging and disposable sanitary products -Determination of low temperature flexibility or cold crack temperature | |
| Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety (includes Amendment A1:2009) | |
| Agricultural machinery - Front loaders - Safety; English version of DIN EN 12525 | |
| Agricultural machinery - Front loaders - Safety; German and English version prEN 12525:2024 | |
| Agricultural machinery - Front loaders - Safety | |
| Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock | |
| Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock | |
| Anti-glare systems for roads - Part 1: Performance and characteristics (includes Amendment A1:2003) | |
| Anti-glare systems for roads - Part 2: Test methods; English version ofDIN EN 12676-2 | |
| Armaturen - Gehaeusefestigkeit - Teil 3: Experimentelles Verfahren; Deutsche Fassung EN 12516-3:2002 | |
| Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points; German and English version prEN 12572-1:2025 | |
| Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points | |
| Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds; German and English version prEN 12572-3:2025 | |
| Artikel fuer Saeuglinge und Kleinkinder - Schnullerhalter - Sicherheitstechnisch e Anforderungen und Pruefverfahren; Deutsche Fassung EN 12586:2007 | |
| Artikel fuer Saeuglinge und Kleinkinder - Schnullerhalter - Sicherheitstechnisch e Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 12586:2021 | |
| Asphalt - Pruefverfahren - Teil 13: Temperaturmessung; Deutsche und Englische Fassung prEN 12697-13:2025 | |
| Asphalt - Pruefverfahren - Teil 18: Bestimmung des Ablaufens; Deutsche und Englische Fassung prEN 12697-18:2025 | |
| Asphalt - Pruefverfahren - Teil 56: Probekoerperherstell ung durch statische Verdichtung; Deutsche Fassung EN 12697-56:2019 | |
| Asphalt - Pruefverfahren fuer Asphalt - Teil 55: Organoleptische Ansprache fuer emulsionsgebundenes Mischgut; Deutsche Fassung EN 12697-55:2019 | |
| Asphalt - Pruefverfahren fuer Heissasphalt - Teil 32: Laborverdichtung von Asphalt mit einem Vibrationsverdichter ; Deutsche Fassung EN 12697-32:2003+A1:200 7 | |
| Asphalt - Pruefverfahren fuer Heissasphalt - Teil 33: Probestueckvorbereit ung mit einem Walzenverdichtungsge raet; Deutsche Fassung EN 12697-33:2003+A1:200 7 | |
| Asphalt - Pruefverfahren fuer Heissasphalt - Teil 44: Bestimmung der Rissausbreitung mittels Halbzylinder-Biegeve rsuch; Deutsche Fassung EN 12697-44:2010 | |
| Asphalt - Pruefverfahren fuer Heissasphalt - Teil 46: Widerstand gegen Kaelterisse und Tieftemperaturverhal ten bei einachsigen Zugversuchen; Deutsche Fassung EN 12697-46:2012 | |
| Asphalt - Pruefverfahren fuer Heissasphalt - Teil 5: Bestimmung der Rohdichte; Deutsche Fassung EN 12697-5:2009 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 5: Aufsaetze und Abdeckungen aus Verbundwerkstoffen; Deutsche Fassung EN 124-5:2015 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 6: Aufsaetze und Abdeckungen aus Polypropylen (PP), Polyethylen (PE) oder weichmacherfreiem Polyvinylchlorid (PVC-U); Deutsche Fassung EN 124-6:2015 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 700: Werkseigene Produktionskontrolle , Fremdueberwachung und Zertifizierung fuer Gullydeckel und Schachtabdeckungen aus Polyamid; Deutsche und Englische Fassung prEN 124-700:2025 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 7: Aufsaetze und Abdeckungen aus Polyamid; Deutsche und Englische Fassung prEN 124-7:2025 | |
| Ausfuehrung spezieller geotechnischer Arbeiten (Spezialtiefbau) - Verdraengungspfaehle ; Deutsche Fassung EN 12699: 2000, Berichtigung zu DIN EN 12699:2001-05 | |
| Bahnanwendungen - Festigkeitsanforderu ngen an Wagenkaesten von Schienenfahrzeugen - Teil 1: Lokomotiven und Personenfahrzeuge (und alternatives Verfahren fuer Gueterwagen); Deutsche Fassung EN 12663-1:2010 | |
| Berichtigungen zu DIN EN 12516-3:2003-01 | |
| Berichtigungen zu DIN EN 12620:2003-04 | |
| Betonfertigteile - Spaltenboeden fuer die Tierhaltung; Deutsche Fassung EN 12737:2004+A1:2007 | |
| Biologische Sicherheitswerkbaenk e - Teil 1: Klassen und grundlegende Anforderungen; Deutsche und Englische Fassung prEN 12469-1:2024 | |
| Biologische Sicherheitswerkbaenk e - Teil 2: BSC Klasse II; Deutsche und Englische Fassung prEN 12469-2:2024 | |
| Biologische Sicherheitswerkbaenk e - Teil 5: Aufstellung, Inbetriebnahme und Wartung; Deutsche und Englische Fassung prEN 12469-5:2024 | |
| Biotechnology - Guidance on assessment of the purity, biological activity and stability of microorganism based products | |
| Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste | |
| Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the functional expression of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified microorganisms, including viruses | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants; German version EN 12468:1997 | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified microorganisms, including viruses | |
| Biotechnology - Performance criteria for microbiological safety cabinets; English version of DIN EN 12469 | |
| Biotechnology - Performance criteria for pumps | |
| Biotechnology - Performance criteria for shaft seals | |
| Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary | |
| Bitumen and bituminous binders - Determination of the Fraass breaking point | |
| Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation | |
| Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction; English version of DIN EN 12606-2 | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3: RFT method; English version of DIN EN 12607-3 | |
| Bitumen and bituminous binders - Terminology; Trilingual version EN 12597:2014 | |
| Bitumen und bitumenhaltige Bindemittel - Anforderungen an Strassenbaubitumen; Deutsche Fassung EN 12591:2009 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der Bestaendigkeit gegen Verhaertung unter Einfluss von Waerme und Luft - Teil 1: RTFOT-Verfahren; Deutsche Fassung EN 12607-1:1999 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der Bestaendigkeit gegen Verhaertung unter Einfluss von Waerme und Luft - Teil 2: TFOT-Verfahren; Deutsche Fassung EN 12607-2:2007 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der kinematischen Viskositaet; Deutsche Fassung EN 12595:2007 | |
| Bitumen und bitumenhaltige Bindemittel - Bestimmung der Loeslichkeit; Deutsche Fassung EN 12592:2007 | |
| Bitumen und bitumenhaltige Bindemittel - Vorbereitung von Untersuchungsproben; Deutsche Fassung EN 12594:2007 | |
| Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen | |
| Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods - Part 10: Compactability; German and English version prEN 12697-10:2025 | |
| Bituminous mixtures - Test methods - Part 14: Water content; German and English version prEN 12697-14:2025 | |
| Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens; German and English version prEN 12697-17:2025 | |
| Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens; German and English version prEN 12697-23:2025 | |
| Bituminous mixtures - Test methods - Part 27: Sampling; German and English version prEN 12697-27:2025 | |
| Bituminous mixtures - Test methods - Part 35: Laboratory mixing; German and English version prEN 12697-35:2023 | |
| Bituminous mixtures - Test methods - Part 48: Interlayer Bonding; German and English version EN 12697-48:2021/prA1:2 025 | |
| Bituminous mixtures - Test methods - Part 48: Interlayer Bonding | |
| Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method | |
| Bituminous mixtures - Test methods - Part 54: Curing of specimen for test of mixtures with bitumen emulsion | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability; English version of DIN EN 12697-10 | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement; English version of DIN EN 12697-13 | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content; English version of DIN EN 12697-14 | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or Marshall specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling; English version of DIN EN 12697-27 | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading; English version of DIN EN 12697-28 | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column EN 12697-4:2005 | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (includes Amendment A1:2007) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of voids characteristics of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the reference density | |
| Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) | |
| Cathodic protection for fixed steel offshore structures; English version of DIN EN 12495 | |
| Cathodic protection for submarine pipelines; English version of DIN EN 12474 | |
| Cathodic protection of steel in concrete; English version of DIN EN 12696 | |
| Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method | |
| Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method | |
| Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method | |
| Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, CI - , Co, Cr, Cr(VI), Cu, Mo, Ni, NO 2 - , Pb, total S,... | |
| Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solids ratio of 2... | |
| Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One-stage batch test at a liquid to solids ratio of 10 l/kg... | |
| Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two-stage batch test at a liquid to solid ratio of 2 l/kg... | |
| Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One-stage batch test at a liquid to solids ratio of 10 l/kg... | |
| Chemicals used for treatment of water intended for human consumption - High-calcium lime | |
| Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfate | |
| Child care articles - Table mounted chairs - Safety requirements and test methods; German version EN 1272:1998 | |
| Child use and care articles - Baby walking frames - Safety requirements and test methods | |
| Chimneys - Components - Concrete outer wall elements | |
| Classification of dense shaped refractory products - Part 4: Special products | |
| Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device (includes Amendment A1:2009) | |
| Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers (includes Amendment A1:2009) | |
| Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device (includes Amendment A1:2009) | |
| Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement (includes Amendment A1:2009) | |
| Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) | |
| Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements | |
| Components for supply systems for consuming units with liquid fuels (includes Corrigendum :2021) | |
| Concrete compactors and smoothing machines - Safety | |
| Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes | |
| Copper and copper alloy plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes | |
| Copper and copper alloy plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes | |
| Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends | |
| Copper and copper alloy plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes | |
| Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends | |
| Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes | |
| Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers | |
| Copper and copper alloys - Seamless, round copper capillary tubes | |
| Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems | |
| Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment | |
| Copper and copper alloys - Seamless, round tubes for general purposes | |
| Copper and copper alloys - Seamless, round tubes for heat exchangers | |
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys | |
| Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80\xb0C; German version EN 1252-1:1998 | |
| Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 \xb0C and -20 \xb0C; English version of DIN EN 1252-2 | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; English version of DIN EN 1251-1 | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing Corrigendum 1 to English version of DIN EN... | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; English version of DIN EN 1251-2 | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; English version of DIN EN 1251-3 | |
| Dauerhaftigkeit von Holz und Holzprodukten - Mit Holzschutzmitteln behandeltes Vollholz - Bestimmung der Eindringtiefe und der Aufnahme von Kreosot (Teerimpraegnieroel) in behandeltem Holz; Deutsche Fassung EN 12490:2010 | |
| Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method | |
| Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD | |
| Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating; English version of DIN EN 12669 | |
| Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, and test methods | |
| Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level | |
| Erdbaumaschinen - Radfahrzeuge - Lenkvermoegen (ISO 5010:1992 modifiziert); Deutsche Fassung EN 12643:1997+A1:2008 | |
| Execution of special geotechnical work - Displacement piles; English version of DIN EN 12699 | |
| Execution of special geotechnical work - Grouting; English version of DIN EN 12715 | |
| Execution of special geotechnical works - Jet grouting; English version of DIN EN 12716 | |
| Fahrmischer - Sicherheitsanforderu ngen; Deutsche Fassung EN 12609:2021 | |
| Fenster und Tueren - Terminologie; Dreisprachige Fassung EN 12519:2018 | |
| Fibre cement flat sheets - Product specification and test methods | |
| Fibre ropes for general service - Hemp ropes | |
| Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l | |
| Flammenueberwachungs einrichtungen fuer Gasgeraete - Thermoelektrische Zuendsicherungen; Deutsche Fassung EN 125:2010 | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; English version of DIN EN 12560-2 | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; English version of DIN EN 12560-3 | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; English version of DIN... | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; English version of DIN EN 12560-5 | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges | |
| Flansche und ihre Verbindungen - Dichtungen fuer Flansche mit Class-Bezeichnung - Teil 1: Flachdichtungen aus nichtmetallischem Werkstoff mit oder ohne Einlagen; Deutsche Fassung EN 12560-1:2001 | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading; English version of DIN EN 12730 | |
| Floor heating - Systems and components - Part 1: Definitions and symbols | |
| Fluessige Mineraloelerzeugniss e - Bestimmung der Gesamtverschmutzung - Teil 1: Mitteldestillate und Dieselkraftstoffe; Deutsche Fassung EN 12662-1:2024 | |
| Fluessige Mineraloelerzeugniss e - Bestimmung der Gesamtverschmutzung - Teil 2: Fettsaeure-Methylest er; Deutsche Fassung EN 12662-2:2024 | |
| Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009) | |
| Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements | |
| Foot and leg protectors - Requirements and test methods for toe caps and penetration resistant inserts | |
| Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements (includes Amendment A1:2009) | |
| Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009) | |
| Founding - Abrasion resistant cast irons; English version of DIN EN 12513 | |
| Founding - Radiographic testing - Part 1: Film techniques; German and English version prEN 12681-1:2025 | |
| Founding - Radiographic testing - Part 1: Film techniques | |
| Founding - Ultrasonic examination - Part 3: Spheroidal graphite cast iron castings | |
| Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings; German and English version prEN 12680-3:2024 | |
| Founding - Visual examination of surface discontinuities - Steel sand castings | |
| Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009) | |
| Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high performance liquid chromatography | |
| Fruit and vegetable juices - Enzymatic determination of acetic acid (acetate) content - NAD spectrometric method | |
| Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method | |
| Furniture - Assessment of surface resistance to dry heat | |
| Furniture - Ranked seating - Test methods and requirements for strength and durability; English version of DIN EN 12727 | |
| Furniture - Strength, durability and safety - Requirements for domestic seating | |
| Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification | |
| Furniture removal activities - Furniture removal for private individuals - Part 2: Provision of service | |
| Galvanische Anoden fuer den kathodischen Schutz in Seewasser und salzhaltigem Schlamm; Deutsche Fassung EN 12496:2013 | |
| Gas meters - Rotary displacement gas Corrigendum 1 to English version of DIN EN 12480:2007-09 | |
| Gas meters - Rotary displacement gas meters (includes Amendment A1:2006) | |
| Gas meters - Rotary displacement gas meters; German and English version prEN 12480:2023 | |
| Gas supply systems - Welding steel pipework - Functional requirements; English version of DIN EN 12732 | |
| Gasinfrastruktur - Gasverdichterstation en - Funktionale Anforderungen; Deutsche Fassung prEN 12583:2012 | |
| Gasschweissgeraete - Festlegungen fuer Schlauchleitungen fuer Ausruestungen fuer Schweissen, Schneiden und verwandte Prozesse; Deutsche Fassung EN 1256:2006 | |
| Gasversorgungssystem e - Gas-Verdichterstatio nen - Funktionale Anforderungen; Deutsche Fassung EN 12583:2000 | |
| General principles of cathodic protection in sea water; English version of DIN EN 12473 | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; English version of DIN EN 12447 | |
| Geschweisste ortsfeste drucklose Behaelter (Tanks) aus Thermoplasten - Teil 1: Allgemeine Grundsaetze; Deutsche Fassung EN 12573-1:2000 | |
| Gesteinskoernungen fuer Beton; Deutsche Fassung EN 12620:2002 | |
| Giessereimaschinen - Sicherheitsanforderu ngen fuer Pfannen, Giesseinrichtungen, Schleudergiessmaschi nen, kontinuierliche und halbkontinuierliche Stranggiessmaschinen ; Deutsche Fassung EN 1247:2004+A1:2010 | |
| Giessereiwesen - Durchstrahlungspruef ung - Teil 2: Technik mit digitalen Detektoren; Deutsche Fassung EN 12681-2:2017 | |
| Giessereiwesen - Durchstrahlungspruef ung - Teil 2: Techniken mit digitalen Detektoren; Deutsche und Englische Fassung prEN 12681-2:2025 | |
| Giessereiwesen - Durchstrahlungspruef ung; Deutsche Fassung EN 12681:2003 | |
| Giessereiwesen - Ultraschallpruefung - Teil 1: Stahlgussstuecke fuer allgemeine Verwendung; Deutsche Fassung EN 12680-1:2003 | |
| Giessereiwesen - Ultraschallpruefung - Teil 1: Stahlgussstuecke fuer allgemeine Verwendung; Deutsche und Englische Fassung prEN 12680-1:2024 | |
| Giessereiwesen - Ultraschallpruefung - Teil 2: Stahlgussstuecke fuer hoch beanspruchte Bauteile; Deutsche Fassung EN 12680-2:2003 | |
| Giessereiwesen - Ultraschallpruefung - Teil 2: Stahlgussstuecke fuer hoch beanspruchte Bauteile; Deutsche und Englische Fassung prEN 12680-2:2024 | |
| Giessereiwesen - Ultraschallpruefung - Teil 4: Phased-Array-Ultrasc hallpruefung von Stahlgussteilen; Deutsche und Englische Fassung prEN 12680-4:2025 | |
| Glas im Bauwesen - Empfehlungen fuer die Verglasung - Verglasungsgrundlage n fuer vertikale und geneigte Verglasung; Deutsche Fassung EN 12488:2016 | |
| Glas im Bauwesen - Waende mit Glassteinen - Planung, Bemessung und Ausfuehrung; Deutsche Fassung prEN 12725:1997 | |
| Glass in building - Pendulum tests - Impact test method and classification for flat glass | |
| Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to DN 1 000 - Compatibility and interchangeability | |
| Glasverpackungen - Bandmundstueck mit einem Eingangsdurchmesser von 18,5 mm fuer Innendichtung und Kapseln als Originalitaetssicher ung; Deutsche und Englische Fassung prEN 12726:2025 | |
| Gullies for buildings - Part 1: Requirements | |
| Gullies for buildings - Part 2: Test methods | |
| Gullies for buildings - Part 4: Access covers | |
| Gullies for buildings - Part 5: Gullies with light liquids closure | |
| Gymnastic equipment - Hanging rings - Functional and safety requirements, test methods | |
| Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases | |
| Industrial valves - Butt welding ends for steel valves | |
| Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; English version of DIN EN 12567 | |
| Industrial valves - Method for sizing the operating element; English version of DIN EN 12570 | |
| Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | |
| Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); English version of DIN EN 12569:1999 + AC:2000 | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods Corrigendum 1 to English translation of DIN EN 12604:2021 | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods; German and English version EN 12604:2017+A1:2020/p rA2:2025 | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements; English version of DIN EN 12604 | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods; English version of DIN EN 12605 | |
| Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method; English version of DIN EN 12489 | |
| Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; English version of DIN EN 12444 | |
| Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods Corrigendum 1 to English translation of DIN EN 12453:2022 | |
| Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; English version of DIN EN 12453 | |
| Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; English version of DIN EN 12445 | |
| Industriearmaturen - Gehaeusefestigkeit - Teil 3: Experimentelles Verfahren; Deutsche und Englische Fassung prEN 12516-3:2025 | |
| Industriearmaturen - Gehaeusefestigkeit - Teil 4: Berechnungsverfahren fuer drucktragende Gehaeuse von Armaturen aus anderen metallischen Werkstoffen als Stahl; Deutsche Fassung EN 12516-4:2008 | |
| Inland navigation vessels - Swing derricks | |
| Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; Parts, oil feed pumps, control and safety devices, supply tanks; English version of DIN EN... | |
| Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves pipes, filters, oil de-aerators, meters; English version of DIN EN 12514-2 | |
| Internal cathodic protection of metallic structures, Corrigenda to DIN EN 12499:2003-07 | |
| Internal cathodic protection of metallic structures | |
| Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment by the owner | |
| Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates; English version of DIN EN 12484-2 | |
| Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management; English version of DIN EN 12484-3 | |
| Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance | |
| Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems | |
| Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical terms of delivery and testing; English version of DIN EN 12734 | |
| Kaelteanlagen und Waermepumpen - Sicherheitstechnisch e und umweltrelevante Anforderungen - Verdraengerverdichte r fuer Kaeltemittel; Deutsche Fassung EN 12693:2008 | |
| Kleinklaeranlagen fuer bis zu 50 EW - Teil 1: Werkmaessig hergestellte Faulgruben; Deutsche Fassung EN 12566-1:2016 | |
| Kleinklaeranlagen fuer bis zu 50 EW - Teil 4: Bausaetze fuer vor Ort einzubauende Faulgruben; Deutsche Fassung EN 12566-4:2007 | |
| Kleinklaeranlagen fuer bis zu 50 EW - Teil 6: Vorgefertigte Anlagen fuer die weitergehende Behandlung des aus Faulgruben ablaufenden Schmutzwassers; Deutsche Fassung EN 12566-6:2013 | |
| Korrosionsschutz von Metallen - Galvanische Nickel-Ueberzuege und Nickel-Chrom-Ueberzu ege, Kupfer-Nickel-Ueberz uege und Kupfer-Nickel-Chrom- Ueberzuege; Deutsche Fassung EN 12540:2000 | |
| Krane - Informationen fuer die Nutzung und Pruefung - Teil 1: Betriebsanleitungen; Deutsche Fassung EN 12644-1:2001+A1:2008 | |
| Krane - Informationen fuer die Nutzung und Pruefung - Teil 2: Kennzeichnung; Deutsche Fassung EN 12644-2:2000+A1:2008 | |
| Kuenstliche Kletteranlagen - Teil 2: Sicherheitstechnisch e Anforderungen und Pruefverfahren fuer Boulderwaende; Deutsche Fassung EN 12572-2:2008 | |
| Kuenstliche Kletteranlagen - Teil 2: Sicherheitstechnisch e Anforderungen und Pruefverfahren fuer Boulderwaende; Deutsche und Englische Fassung prEN 12572-2:2025 | |
| Kuenstliche Kletteranlagen - Teil 3: Sicherheitstechnisch e Anforderungen und Pruefverfahren fuer Klettergriffe; Deutsche Fassung EN 12572-3:2008 | |
| Kunststofffaesser - Deckelfaesser mit einem Nennvolumen von 25 l bis 60 l; Deutsche Fassung EN 12714:2009 | |
| Kupfer und Kupferlegierungen - Fittings - Teil 20: Definitionen, Gewindemasse, Pruefverfahren, Referenzdaten und ergaenzende Informationen; Deutsche Fassung EN 1254-20:2021 | |
| Kupfer und Kupferlegierungen - Fittings - Teil 7: Pressfittings fuer den Einsatz mit metallischen Rohren; Deutsche Fassung EN 1254-7:2021 | |
| Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves | |
| Lead and lead alloys - Lead | |
| Lead and lead alloys - Rolled lead sheet for building purposes | |
| Licht und Beleuchtung - Beleuchtung von Arbeitsstaetten - Teil 1: Arbeitsstaetten in Innenraeumen; Beiblatt 1: Beleuchtungskonzepte und Beleuchtungsarten fuer kuenstliche Beleuchtung | |
| Licht und Beleuchtung - Beleuchtung von Arbeitsstaetten - Teil 2: Arbeitsplaetze im Freien; Deutsche Fassung EN 12464-2:2014 | |
| Licht und Beleuchtung - Beleuchtung von Arbeitsstaetten - Teil 2: Arbeitsplaetze im Freien; Deutsche und Englische Fassung prEN 12464-2:2023 | |
| Light and lighting - Basic terms and criteria for specifying lighting requirements; English version of DIN EN 12665 | |
| Light and lighting - Lighting of work places - Part 1: Indoor work places | |
| Liquid petroleum products - Determination of contamination in middle distillates | |
| Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units; English version of DIN EN 12723 | |
| Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests | |
| LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m 3 -... | |
| LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture | |
| Lueftung von Gebaeuden - Pruef- und Messverfahren fuer die Uebergabe raumlufttechnischer Anlagen und Luftbehandlungssyste me in Nichtwohngebaeuden; Deutsche und Englische Fassung prEN 12599:2024 | |
| Machinery for the supply and circulation of coating materials under pressure - Safety requirements | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; English version of DIN EN 12629-1 | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; English version of DIN EN 12629-4 | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; Corrigenda to DIN EN 12546-1:2000-09 | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; English version of DIN EN 12546-1... | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes; English version of DIN EN 12546-2 | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; English version of DIN EN 12546-3 | |
| Moebel - Bewertung der Bestaendigkeit von Oberflaechen gegen feuchte Hitze; Deutsche Fassung EN 12721:2009 | |
| Moebel - Bewertung der Bestaendigkeit von Oberflaechen gegen kalte Fluessigkeiten; Deutsche Fassung EN 12720:2009 | |
| Moebel - Festigkeit, Dauerhaltbarkeit und Sicherheit - Anforderungen an Tische im Wohnbereich; Deutsche Fassung EN 12521:2009 | |
| Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods (includes Amendment A1:2002) | |
| Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods; German and English version prEN 12492:2024 | |
| Multifunctional controls for gas burning appliances | |
| Natural stone - Terminology | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment; English version of DIN EN 12668-3 | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment | |
| Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; English version of DIN EN 12544-2 | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method | |
| Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels | |
| Packaging - Cork mouth finish with a bore diatmeter of 18,5 mm for corks and tamper evident capsules; English version of DIN EN 12726 | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract | |
| Paragliders equipment - Emergency parachutes - Safety requirements and test methods; English version of DIN EN 12491 | |
| Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method | |
| Phosphate conversion coatings of metals - Method of specifying requirements; English version of DIN EN 12476 | |
| Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC | |
| Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC | |
| Plastics drums - Non-removable head (tight head) circular cross section drums with a nominal capacity of 20 l to 120 l; English version of DIN EN 12709 | |
| Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l | |
| Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system | |
| Plastics piping systems for non-pressure underground drains and sewers - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German and English version prEN 12666-1:2025 | |
| Playing field equipment - Basketball equipment - Functional and safety requirements, test methods | |
| Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods | |
| Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing | |
| Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling -... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling -... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Calciumcarbonat, Weisskalk, halbgebrannter Dolomit, Magnesiumoxid und Calciummagnesiumcarb onat - Analytische Verfahren; Deutsche Fassung EN 12485:2010 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Calciumcarbonat, Weisskalk, halbgebrannter Dolomit, Magnesiumoxid, Calciummagnesiumcarb onat und Dolomitkalk - Pruefverfahren; Deutsche und Englische Fassung prEN 12485:2024 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Kaliumpermanganat; Deutsche Fassung EN 12672:2008 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Vor Ort erzeugtes Chlordioxid; Deutsche Fassung EN 12671:2009 | |
| Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Tueren - Klassifizierung, Anforderungen und Pruefverfahren - Teil 2: PVC-U-Profile mit durch Klebstoff kaschierte Folien; Deutsche Fassung EN 12608-2:2023 | |
| Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Tueren - Klassifizierung, Anforderungen und Pruefverfahren - Teil 4: PVC-U-Profile mit thermo-kaschierten Folien; Deutsche Fassung EN 12608-4:2024 | |
| Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Tueren - Klassifizierung, Anforderungen und Pruefverfahren; Deutsche Fassung EN 12608:2003 | |
| Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys | |
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments; English version of DIN EN 12500 | |
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General | |
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and unalloyed ferrous materials | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot-dip galvanised ferrous materials... | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and... | |
| Protective gloves for welders | |
| Raeder und Rollen - Apparaterollen - Manuell betaetigte Raeder und Rollen; Deutsche Fassung EN 12530:1998 | |
| Raeder und Rollen - Krankenbettenrollen; Deutsche Fassung EN 12531:1998 | |
| Raeder und Rollen - Moebelrollen - Anforderungen; Deutsche Fassung EN 12528:1998 | |
| Raeder und Rollen - Moebelrollen - Rollen fuer Drehstuehle - Anforderungen; Deutsche Fassung EN 12529:1998 | |
| Raeder und Rollen - Pruefverfahren und -geraete; Deutsche Fassung EN 12527:1998 | |
| Raeder und Rollen - Transportgeraeteroll en bis zu einer Geschwindigkeit von 1,1 m/s (4 km/h); Deutsche Fassung EN 12532:1998 | |
| Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons | |
| Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return | |
| Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure | |
| Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products | |
| Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products | |
| Railway applications - Tank wagons - Part 6: Manholes | |
| Railway applications - Tank wagons - Part 7: Platforms and ladders | |
| Railway Applications - Tank wagons - Part 8: Heating connections | |
| Railway applications - Tank wagons - Part: 1: Marking of tank wagons for the carriage of dangerous goods | |
| Raumflaechenintegrie rte Heiz- und Kuehlsysteme mit Wasserdurchstroemung - Teil 2: Fussbodenheizung: Pruefverfahren fuer die Bestimmung der Waermeleistung unter Benutzung von Berechnungsmethoden und experimentellen Methoden; Deutsche Fassung EN 1264-2:2008 | |
| Raumflaechenintegrie rte Heiz- und Kuehlsysteme mit Wasserdurchstroemung - Teil 5: Heiz- und Kuehlflaechen in Fussboeden, Decken und Waenden - Bestimmung der Waermeleistung und der Kuehlleistung; Deutsche Fassung EN 1264-5:2008 | |
| Reciprocating internal combustion engine driven generating sets - Safety; English version of DIN EN 12601 | |
| Resilient floor coverings - Specification for corkment underlay | |
| Resilient floor coverings - Vocabulary; German version EN 12466:1998 | |
| Roll containers - Part 1: Terminology | |
| Roll containers - Part 2: General design and safety principles; English version of DIN EN 12674-2 | |
| Roll containers - Part 3: Test methods | |
| Rollbehaelter - Teil 4: Leistungsanforderung en; Deutsche Fassung EN 12674-4:2006 | |
| Safety of machine tools - Drilling machines (includes Amendment A1:2009) | |
| Safety of machine tools - Hydraulic press brakes | |
| Safety of machinery - Noise test code for foundry machines and equipment (includes Amendment A1:2008) | |
| Sanitaerarmaturen - WC- und Urinaldruckspueler mit selbsttaetigem Abschluss PN 10; Deutsche Fassung EN 12541:2002 | |
| Sanitaerarmaturen - WC- und Urinaldruckspueler mit selbsttaetigem Abschluss PN 10; Deutsche und Englische Fassung prEN 12541:2024 | |
| Schutznetze (Auffangnetze) - Teil 1: Sicherheitstechnisch e Anforderungen, Pruefverfahren; Deutsche Fassung EN 1263-1:2002 | |
| Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnisch e Anforderungen fuer die Errichtung von Schutznetzen; Deutsche Fassung EN 1263-2:2002 | |
| Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l; English version of DIN EN 12713 | |
| Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements | |
| Securing of cargo on road vehicles - Lashing points on commerical vehicles for goods transportation - Minimum requirements and testing; English version of DIN EN 12640 | |
| Sicherheits- und Regeleinrichtungen fuer Brenner und Brennstoffgeraete fuer gasfoermige Brennstoffe - Mehrfachstellgeraete fuer Gasgeraete; Deutsche und Englische Fassung prEN 126:2024 | |
| Sicherungseinrichtun gen zum Schutz des Trinkwassers gegen Verschmutzung durch Rueckfliessen - Systemtrenner mit kontrollierbarer druckreduzierter Zone - Familie B - Typ A; Deutsche Fassung EN 12729:2002, Berichtigung zu DIN EN... | |
| Sicherungseinrichtun gen zum Schutz des Trinkwassers gegen Verschmutzung durch Rueckfliessen - Systemtrenner mit kontrollierbarer druckreduzierter Zone - Familie B, Typ A; Deutsche Fassung EN 12729:2002 | |
| Simulierte Abrieb- und Korrosionspruefung zum Nachweis der Nickelabgabe von mit Auflagen versehenen Gegenstaenden; Deutsche Fassung EN 12472:2005+A1:2009 | |
| Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants (includes Amendment A1:2009) | |
| Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units | |
| Soil improvers and growing media - Determination of a quantity | |
| Soil improvers and growing media - Sampling | |
| Sport mats - Part 4: Determination of shock absorption; English version of DIN EN 12503-4 | |
| Sport mats - Part 5: Determination of the base friction; English version of DIN EN 12503-5 | |
| Sportmatten - Teil 2: Stabhochsprung- und Hochsprung-Matten, sicherheitstechnisch e Anforderungen (enthaelt Berichtigung AC:2002); Deutsche Fassung EN 12503-2:2001 + AC:2002 | |
| Sports mats - Part 1: Gymnastic mats, safety requirements | |
| Sports mats - Part 3: Judo mats; Safety requirements; English version of DIN EN 12503-3 | |
| Sports mats - Part 6: Determination of the top friction; English version of DIN EN 12503-6 | |
| Sports mats - Part 7: Determination of static stiffness; English version of DIN EN 12503-7 | |
| Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions... | |
| Stationary waste containers - Part 2: Performance requirements and test methods | |
| Stationary waste containers - Part 3: Safety and health requirements | |
| Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials; English version of DIN EN 12701 | |
| Surface active agents - Determination of foaming power - Perforated disc beating method | |
| Surface active agents - Determination of pH value of solutions or dispersions | |
| Surface active agents - Determination of stability in hard water | |
| Surfaces for sports areas - Determination of water infiltration rate | |
| Swap bodies and commercial vehicles - Tarpaulins - Part 1: Minimum requirements | |
| Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders | |
| Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression | |
| Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; English version of DIN EN 12504-2 | |
| Testing concrete in structures - Part 3: Determination of pull-out force | |
| Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity | |
| Textile floor coverings - Assessment of impregnations in needled floorcoverings by means of a soiling test; German version EN 1269:1997 | |
| Textile glass - Yarns - Part 1: Designation | |
| Textile glass - Yarns - Part 2: Methods of test and general specifications | |
| Textile glass - Yarns - Part 3: General requirements for general applications | |
| Textiles - Industrial sewing threads made wholly or partly from synthetic fibres | |
| Textiles - Para-aramid multifilament yarns - Test methods | |
| Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal... | |
| Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content | |
| Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners | |
| Tore - Einbau und Nutzung; Deutsche Fassung EN 12635:2002+A1:2008 | |
| Traffic signal controllers - Functional safety requirements; English version of DIN EN 12675 | |
| Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries | |
| Umzugsdienste - Umzuege fuer Privatpersonen - Festlegung von Dienstleistungen; Deutsche Fassung EN 12522:2024 | |
| Umzugsdienste - Umzuege fuer Privatpersonen - Festlegung von Dienstleistungen; Deutsche und Englische Fassung prEN 12522:2023 | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-covered PVC-U profiles; German and English version prEN 12608-1:2025... | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 3: PVC-U profiles covered with paint; German and English version... | |
| Unregelmaessigkeiten an Brennschnitten, Laserstrahlschnitten und Plasmaschnitten - Terminologie; Dreisprachige Fassung EN 12584:1999 | |
| Valves - Test of flow resistance using water as test fluid | |
| Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate; English version of DIN EN 12589 | |
| Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; English version of DIN EN 12599 | |
| Vordruck fuer Bauartspezifikation: Abgleiche fuer Kerne aus magnetischen Oxiden (Ferriten) in Spulen und abgestimmten Uebertragern; Deutsche Fassung EN 125401:1991 | |
| Vorgefertigte bewehrte Bauteile aus dampfgehaertetem Porenbeton; Deutsche Fassung EN 12602:2008 | |
| Vorgefertigte bewehrte Bauteile aus dampfgehaertetem Porenbeton; Deutsche und Englische Fassung prEN 12602:2025 | |
| Waermetechnisches Verhalten von Baustoffen und Bauprodukten - Bestimmung des Waermedurchlasswider standes nach dem Verfahren mit dem Plattengeraet und dem Waermestrommessplatt en-Geraet - Trockene und feuchte Produkte mit mittlerem und niedrigem... | |
| Warneinrichtungen aus Kunststoff mit visuellen Eigenschaften fuer erdverlegte Kabel und Rohrleitungen; Deutsche Fassung EN 12613:2009 | |
| Water based surface embedded heating and cooling systems - Part 3: Dimensioning | |
| Water based surface embedded heating and cooling systems - Part 4: Installation | |
| Water quality - Gas chromatographic determination of some selected chlorophenols in water | |
| Welded static non-pressurized thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; English version of DIN EN 12573-2 | |
| Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints; English version of DIN EN 12573-4 | |
| Welded static non-pressurzed thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks; English version of DIN EN 12573-3 | |
| Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification; English version of DIN EN 12536 | |
| Werkstoffe und Gegenstaende in Kontakt mit Lebensmitteln - Transporteinheiten fuer fertige Speisen in Speisenbehaeltern - Thermische und hygienische Anforderungen und Pruefverfahren; Deutsche Fassung EN 12571:1998 | |
| Wood poles for overhead lines - Determination of characteristic values | |
| Wood poles for overhead lines - Durability requirements | |
| Wood poles for overhead lines - Sizes - Methods of measurements and limit deviations | |
| Wood poles for overhead lines - Strength grading criteria; English version of DIN EN 12510:2001 + AC:2002 | |
| Zentrifugen - Allgemeine Sicherheitsanforderu ngen; Deutsche Fassung EN 12547:1999+A1:2009 | |
| Zerstoerungsfreie Pruefung - Charakterisierung von Brennflecken in Industrie-Roentgenan lagen fuer die zerstoerungsfreie Pruefung - Teil 2: Radiographisches Lochkamera-Verfahren ; Deutsche Fassung EN 12543-2:2008 | |
| Zerstoerungsfreie Pruefung - Charakterisierung von Brennflecken in Industrie-Roentgenan lagen fuer die zerstoerungsfreie Pruefung - Teil 5: Messung der effektiven Brennfleckgroesse von Mini- und Mikrofokus-Roentgenr oehren; Deutsche Fassung EN 12543-5:1999 | |
| Zerstoerungsfreie Pruefung von Schweissverbindungen - Teil 2: Bewertung von Schweissverbindungen in Aluminium und seinen Legierungen mit Durchstrahlung - Zulaessigkeitsgrenze n; Deutsche Fassung EN 12517-2:2008 | |
| Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method | |
| Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction | |
| Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method | |
| Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; English version of DIN EN 12441-3 |
| << Prev | Next >> |