Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
200
250
300
350
400
450
490
500
510
520
530
540
545
546
547
548
549
550
551
552
553
554
555
556
557
560
570
580
590
600
610
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within... | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments... | |
| Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 1: Determination of size content | |
| Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 2: Determination of linear density | |
| Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area | |
| AIR TEST REPORT | |
| Allgemeine technische Lieferbedingungen fuer Stahlerzeugnisse; Deutsche Fassung EN 10021:2006 | |
| Assessment of the ignitability of upholstered furniture; ignition source: match flame equivalent (ISO 8191-2:1988, modified) | |
| Assessment of the ignitability of upholstered furniture; ignition source: smouldering cigarette (ISO 8191-1:1987, modified) | |
| Automatenstaehle - Technische Lieferbedingungen fuer Halbzeug, warmgewalzte Staebe und Walzdraht; Deutsche Fassung EN 10087:1998 | |
| Automatisch gestrahlte und automatisch fertigungsbeschichte te Erzeugnisse aus Baustaehlen; Deutsche Fassung EN 10238:2009 | |
| Begriffe der Waermebehandlung von Eisenwerkstoffen; Deutsche Fassung EN 10052:1993 | |
| Begriffsbestimmung fuer die Einteilung der Staehle; Deutsche Fassung EN 10020:2000 | |
| Bezeichnungssysteme fuer Staehle - Teil 1: Kurznamen; Deutsche Fassung EN 10027-1:2005 | |
| Blankstahlerzeugniss e - Technische Lieferbedingungen - Teil 3: Automatenstaehle; Deutsche Fassung EN 10277-3:2008 | |
| Blankstahlerzeugniss e - Technische Lieferbedingungen - Teil 4: Einsatzstaehle; Deutsche Fassung EN 10277-4:2008 | |
| Blankstahlerzeugniss e - Technische Lieferbedingungen - Teil 5: Verguetungsstaehle; Deutsche Fassung EN 10277-5:2008 | |
| Bright steel products - Technical delivery conditions - Part 1: General | |
| Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes | |
| Bright steel products - Technical delivery conditions | |
| Brinell hardness testing of metallic materials - Calibration of standardized blocks to be used for Brindell hardness testing machines | |
| Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; Corrigendum 1 to English translation of DIN EN 10253-4:2008-06 | |
| Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German and English version prEN 10253-4:2017 | |
| Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | |
| Case hardening steels - Technical delivery conditions | |
| Charpy impact test on metallic materials; test method (English version of DIN EN 10045 Part 1) | |
| Chemical analysis of ferrous materials - Determination of arsenic in steel and iron by the spectrophotometric method | |
| Chemical analysis of ferrous materials; determination of boron in steel by spectrophotometry; german version EN 10200:1991 | |
| Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method (English version of DIN EN 10177) | |
| Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method (English version of DIN EN 10188) | |
| Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method (English version of DIN EN 10181) | |
| Chemical analysis of ferrous materials; determination of manganese in steel and iron; electrometric titration method (English version of DIN EN 10071) | |
| Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method (English version of DIN EN 10136) | |
| Chemical analysis of ferrous materials; determination of phosphorus in steels and iron; spectrophotometric method (English version of DIN EN 10184) | |
| Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen (English version of DIN EN 10036) | |
| Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite; Corrigendum 1 to English translation of DIN EN 1017:2008-04 | |
| Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite; German and English version prEN 1017:2023 | |
| Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite | |
| Chemicals used for treatment of water intended for human consumption - Sulfur dioxide | |
| Chemische Analyse von Eisen- und Stahlwerkstoffen; Bestimmung von Stickstoff (Spuren-Gehalte) in Stahl; Photometrisches Verfahren; Deutsche Fassung EN 10179:1989 | |
| Chemische Analyse von Eisenwerkstoffen - Bestimmung des Sauerstoffgehaltes von Stahl und Eisen - Teil 2: Messung der Infrarotabsorption nach Aufschmelzen unter Inertgas; Deutsche Fassung EN 10276-2:2003 | |
| Chemische Analyse von Eisenwerkstoffen; Bestimmung von Niob in Staehlen; Photometrisches Verfahren; Deutsche Fassung EN 10178:1989 | |
| Clay roofing tiles for discontinuous laying - Determination of geometric characteristics | |
| Cold formed non-alloy steel sheet piling - Technical delivery conditions | |
| Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels | |
| Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions | |
| Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties | |
| Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel (English version of DIN EN 10205) | |
| Cold reduced electrolytic chromium/chromium oxide coated steel (English version of DIN EN 10202) | |
| Cold reduced electrolytic tinplate (English version of DIN EN 10203) | |
| Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state | |
| Cold rolled electrical unalloyed steel sheet and strip delivered in the semi-processed state | |
| Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions | |
| Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions | |
| Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions | |
| Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions | |
| Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; English version of DIN EN 10132-1 | |
| Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 2: Case hardening steels; English version of DIN EN 10132-2 | |
| Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 4: Spring steels and other applications | |
| Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances | |
| Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions | |
| Continuously hot rolled uncoated unalloyed and alloy steel plate, sheet and strip - Tolerances on dimensions and shape (includes Amendment A1:1997) | |
| Continuously hot-dip aluminium-zinc (AZ) coated steel sheet and strip - Technical delivery conditions | |
| Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions | |
| Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape | |
| Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions | |
| Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions | |
| Continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming - Technical delivery conditions (including Amendment A1:1995) | |
| Continuously hot-dip zinc coated structural steel sheet and strip - Technical delivery conditions (including Amendment A1:1995) | |
| Continuously hot-dip zinc-aluminium (ZA) coated steel sheet and strip - Technical delivery conditions | |
| Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) | |
| Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications | |
| Corrosion resistant steel castings | |
| Definition and classification of pig iron (English version of DIN EN 10001) | |
| Definition of steel products; german version EN 10079:1992 | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements Corrigendum 1 to English version of DIN EN 10163-1:2005-03 | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections | |
| Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats | |
| Designation systems for steel; numerical system (Enlish version of DIN EN 10027 Part 2) | |
| Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; English version of DIN EN 10276-1 | |
| Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method | |
| Determination of titanium in steel and iron - Flame atomic absorption spectrometric method | |
| Domestic furniture - Seating - Determination of stability | |
| Eisen und Stahl - Bestimmung der Einhaertungstiefe nach dem Randschichthaerten; Deutsche Fassung EN 10328:2005 | |
| Elektrolytisch verzinkte kaltgewalzte Flacherzeugnisse aus Stahl zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung EN 10152:2009, Berichtigung zu DIN EN 10152:2009-07; Deutsche Fassung EN 10152:2009/AC:2011 | |
| Elektrolytisch verzinkte kaltgewalzte Flacherzeugnisse aus Stahl zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung EN 10152:2009 | |
| ENGINE CONTROL SYSTEM COMPONENT SIMILARITY ARGUMENT REPORT DOCUMENTATION REQUIREMENTS | |
| ENGINE CONTROL SYSTEM COMPONENT TEST PLAN DOCUMENTATION REQUIREMENTS | |
| ENGINE CONTROL SYSTEM COMPONENT TEST REPORT DOCUMENTATION REQUIREMENTS | |
| Engineering Data on Equipment Submitted for Testing | |
| EQUIPMENT INSPECTION AND TESTING REPORT | |
| Evaluation of resistance of steel products to hydrogen induced cracking (HIC) | |
| Fahrbare Arbeitsbuehnen - Teil 2: Regeln und Festlegungen fuer die Aufstellung einer Aufbau- und Verwendungsanleitung ; Deutsche Fassung EN 1004-2:2021 | |
| Fahrbare Arbeitsbuehnen aus vorgefertigten Bauteilen - Teil 1: Werkstoffe, Masse, Lastannahmen und sicherheitstechnisch e Anforderungen; Deutsche Fassung EN 1004-1:2020 | |
| Fenster und Tueren - Schlagregendichtheit - Pruefverfahren; Deutsche Fassung EN 1027:2000 | |
| Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures | |
| Feuerloeschpumpen - Feuerloeschkreiselpu mpen mit Entlueftungseinricht ung - Teil 1: Klassifizierung - Allgemeine und Sicherheitsanforderu ngen; Deutsche Fassung EN 1028-1:2002+A1:2008, Berichtigung zu DIN EN 1028-1:2008-09 | |
| Feuerloeschpumpen - Feuerloeschkreiselpu mpen mit Entlueftungseinricht ung - Teil 1: Klassifizierung - Allgemeine und Sicherheitsanforderu ngen; Deutsche Fassung EN 1028-1:2002+A1:2008 | |
| Feuerloeschpumpen - Feuerloeschkreiselpu mpen mit Entlueftungseinricht ung - Teil 2: Feststellung der Uebereinstimmung mit den allgemeinen und Sicherheitsanforderu ngen; Deutsche Fassung EN 1028-2:2002+A1:2008, Berichtigung zu DIN EN 1028-2:2008-06 | |
| Feuerloeschpumpen - Feuerloeschkreiselpu mpen mit Entlueftungseinricht ung - Teil 2: Feststellung der Uebereinstimmung mit den allgemeinen und Sicherheitsanforderu ngen; Deutsche Fassung EN 1028-2:2002+A1:2008 | |
| FIRST ARTICLE TEST/INSPECTION PROCEDURES AND PLAN (FAT/IPP) | |
| FIRST ARTICLE TEST/INSPECTION PROCEDURES AND REPORT (FAT/IPR) | |
| Flacherzeugnisse aus Druckbehaelterstaehl en - Teil 5: Schweissgeeignete Feinkornbaustaehle, thermomechanisch gewalzt; Deutsche Fassung EN 10028-5:2009 | |
| Flacherzeugnisse aus Stahl mit elektrolytisch abgeschiedenen Zink-Nickel (ZN)-Ueberzuegen - Technische Lieferbedingungen; Deutsche Fassung EN 10271:1998 | |
| Flat products made of steels for pressure purposes - Part 1: General requirements (includes Amendment A1:2009) | |
| Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties - Corrigendum 1 to English version of DIN EN 10028-2:2003-09... | |
| Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties | |
| Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized | |
| Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties Corrigendum 1 to English version of DIN EN 10028-4:2003:09 | |
| Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties | |
| Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered | |
| Flat products made of steels for pressure purposes - Part 7: Stainless steels | |
| Formstuecke zum Einschweissen - Teil 1: Unlegierter Stahl fuer allgemeine Anwendungen und ohne besondere Pruefanforderungen; Deutsche Fassung EN 10253-1:1999 | |
| Formstuecke zum Einschweissen - Teil 1: Unlegierter Stahl fuer allgemeine Anwendungen und ohne besondere Pruefanforderungen; Deutsche und Englische Fassung prEN 10253-1:2025 | |
| Formstuecke zum Einschweissen - Teil 2: Unlegierte und legierte ferritische Staehle mit besonderen Pruefanforderungen; Deutsche Fassung EN 10253-2:2007 | |
| Formstuecke zum Einschweissen - Teil 2: Unlegierte und legierte ferritische Staehle mit besonderen Pruefanforderungen; Deutsche und Englische Fassung EN 10253-2:2021/prA1:20 24 | |
| Formstuecke zum Einschweissen - Teil 3: Austenitische und austenitisch-ferriti sche (Duplex) nichtrostende Staehle ohne besondere Pruefanforderungen; Deutsche und Englische Fassung prEN 10253-3:2025 | |
| Formstuecke zum Einschweissen - Teil 3: Nichtrostende austenitische und austenitisch-ferriti sche (Duplex-) Staehle ohne besondere Pruefanforderungen; Deutsche Fassung EN 10253-3:2008, Berichtigung zu DIN EN 10253-3:2009-02 | |
| Formstuecke zum Einschweissen - Teil 3: Nichtrostende austenitische und austenitisch-ferriti sche (Duplex-) Staehle ohne besondere Pruefanforderungen; Deutsche Fassung EN 10253-3:2008 | |
| Freiformschmiedestue cke aus Stahl fuer allgemeine Verwendung - Teil 2: Unlegierte Qualitaets- und Edelstaehle; Deutsche Fassung EN 10250-2:1999 | |
| Freiformschmiedestue cke aus Stahl fuer allgemeine Verwendung - Teil 3: Legierte Edelstaehle; Deutsche Fassung EN 10250-3:1999 | |
| Freiformschmiedestue cke aus Stahl fuer allgemeine Verwendung - Teil 4: Nichtrostende Staehle; Deutsche Fassung EN 10250-4:1999, Berichtigung zu DIN EN 10250-4:2000-02 | |
| Freiformschmiedestue cke aus Stahl fuer allgemeine Verwendung - Teil 4: Nichtrostende Staehle; Deutsche Fassung EN 10250-4:1999 | |
| Gasbefeuerte Warmlufterzeuger mit verstaerkter Konvektion fuer den nicht-haeuslichen Gebrauch mit einer Nennwaermebelastung nicht ueber 300 kW, mit Geblaese zur Befoerderung der Verbrennungsluft und/oder der Abgase; Deutsche Fassung EN 1020:2009 | |
| Geschweisste kreisfoermige Stahlrohre fuer den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten und legierten Staehlen; Deutsche Fassung EN 10296-1:2002 | |
| Geschweisste kreisfoermige Stahlrohre fuer den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 2: Nichtrostende Staehle; Deutsche Fassung EN 10296-2:2005, Berichtigungen zu DIN EN 10296-2:2006-02; Deutsche Fassung EN... | |
| Geschweisste kreisfoermige Stahlrohre fuer den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 2: Nichtrostende Staehle; Deutsche Fassung EN 10296-2:2005 | |
| Geschweisste Stahlrohre fuer Druckbeanspruchungen ; Technische Lieferbedingungen; Unlegierte Staehle mit festgelegten Raumtemperatureigens chaften; Deutsche Fassung prEN 10217-1:1991 | |
| Gesenkschmiedeteile - Masstoleranzen - Teil 2: Warm hergestellt in Waagerecht-Stauchmas chinen; Deutsche Fassung EN 10243-2:1999, Berichtigungen zu DIN EN 10243-2:2000-06; Deutsche Fassung EN 10243-2:1999/AC:2005 | |
| Gesenkschmiedeteile aus Stahl - Masstoleranzen - Teil 1: Warm hergestellt in Haemmern und Senkrecht-Pressen; Deutsche Fassung EN 10243-1:1999, Berichtigungen zu DIN EN 10243-1:2000-06; Deutsche Fassung EN 10243-1:1999/AC:2005 | |
| Gesenkschmiedeteile aus Stahl - Masstoleranzen - Teil 1: Warm hergestellt in Haemmern und Senkrecht-Pressen; Deutsche Fassung EN 10243-1:1999, Berichtigungen zu DIN EN 10243-1:2000-06 | |
| Gesenkschmiedeteile aus Stahl - Masstoleranzen - Teil 1: Warm hergestellt in Haemmern und Senkrecht-Pressen; Deutsche Fassung EN 10243-1:1999 | |
| Gesenkschmiedeteile aus Stahl - Masstoleranzen - Teil 2: Warm hergestellt in Waagerecht-Stauchmas chinen; Deutsche Fassung EN 10243-2:1999 | |
| Grain-oriented electrical steel sheet and strip delivered in the fully processed state | |
| Halbzeug zum Schmieden - Grenzabmasse, Formtoleranzen und Grenzabweichungen der Masse; Deutsche Fassung EN 10031:2003 | |
| Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General | |
| Heizoefen fuer fluessige Brennstoffe mit Verdampfungsbrennern und Schornsteinanschluss ; Deutsche Fassung EN 1:1998+A1:2007 | |
| Hitzebestaendige Staehle und Nickellegierungen; Deutsche Fassung EN 10095:1999 | |
| Hitzebestaendiger Stahlguss; Deutsche Fassung EN 10295:2002 | |
| Hochleistungskeramik - Keramische Verbundwerkstoffe - Verfahren zur Pruefung der Faserverstaerkungen - Teil 6: Bestimmung der Zugeigenschaften von Fasern bei hoher Temperatur; Deutsche Fassung EN 1007-6:2007 | |
| Hochleistungskeramik - Monolithische Keramik - Leitlinie zur Auswahl von Proben fuer die Beurteilung von Eigenschaften; Deutsche Fassung EN 1006:2009 | |
| Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels | |
| Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties | |
| Holzschutzmittel - Kreosot (Teerimpraegnieroel) und damit impraegniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus impraegniertem Holz fuer die nachfolgende Analyse; Deutsche Fassung EN... | |
| Holzschutzmittel - Kreosot (Teerimpraegnieroel) und damit impraegniertes Holz - Probenahme und Analyse - Teil 3: Bestimmung des Gehaltes an Benzo(a)pyren im Kreosot; Deutsche Fassung EN 1014-3:2010 | |
| Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions | |
| Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties | |
| Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass | |
| Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled hexagon steel bars - Dimensions and tolerances on shape and dimensions | |
| Hot rolled narrow steel strip - Dimensional and geometrical tolerances | |
| Hot rolled non-alloy steel sheet piling - Technical delivery conditions | |
| Hot rolled products of structural steels - Part 1: General technical delivery conditions | |
| Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels | |
| Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance | |
| Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition (includes Amendment A1:2009)... | |
| Hot rolled spring steel flat bars - Part 1: Flat bars; Dimensions and tolerances on shape and dimensions | |
| Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves, dimensions and tolerances on shape and dimensions | |
| Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled steel channels - Tolerances on shape, dimensions and mass; English version of DIN EN 10279 | |
| Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled steel plate 3 mm thick or above; tolerances on dimensions, shape and mass (English version of DIN EN 10029) | |
| Hot rolled steel taper flange I sections - Tolerances on shape and dimensions | |
| Hot rolled steels for quenched and tempered springs - Technical delivery conditions | |
| Hot rolled unalloyed structural steel products; technical delivery conditions (includes Amendment A1:1993) | |
| Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties | |
| Hot-rolled products in weldable fine grain structural steels - Part 1: General delivery conditions; German version EN 10113-1:1993 | |
| Hot-rolled products in weldable fine grain structural steels - Part 2: Delivery conditions for normalized/normalize d rolled steels; German version EN 10113-2:1993 | |
| Hot-rolled products made of high yield strength steels for cold forming - Delivery conditions for normalized or normalized rolled steels | |
| Hot-rolled products made of high yield strength steels for cold forming - Delivery conditions for thermomechanically rolled steels | |
| Hot-rolled products made of high yield strength steels for cold forming - General delivery conditions | |
| Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants | |
| Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams; English version of DIN EN 10306 | |
| Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids | |
| Kaltband - Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 10140:2006 | |
| Kaltband aus Stahl fuer eine Waermebehandlung - Technische Lieferbedingungen - Teil 3: Verguetungsstaehle; Deutsche Fassung EN 10132-3:2000 | |
| Kaltband aus Stahl fuer eine Waermebehandlung - Technische Lieferbedingungen; Deutsche Fassung EN 10132:2021 | |
| Kaltband ohne Ueberzug aus weichen Staehlen zum Kaltumformen - Technische Lieferbedingungen; Deutsche und Englische Fassung EN 10139:2016/prA1:2018 | |
| Kaltgefertigte geschweisste Hohlprofile fuer den Stahlbau aus unlegierten Baustaehlen und aus Feinkornbaustaehlen - Teil 2: Grenzabmasse, Masse und statische Werte; Deutsche Fassung EN 10219-2:2006, Berichtigungen zu DIN EN 10219-2:2006-07 | |
| Kaltgeformte Spundbohlen aus unlegierten Staehlen - Teil 2: Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 10249-2:1995 | |
| Kaltgewalzte Flacherzeugnisse aus weichen Staehlen zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung EN 10130:2006, Berichtigungen zu DIN EN 10130:2007-02 | |
| Kaltgewalzte Flacherzeugnisse ohne Ueberzug und mit elektrolytischem Zink- oder Zink-Nickel-Ueberzug aus weichen Staehlen sowie aus Staehlen mit hoeherer Streckgrenze zum Kaltumformen - Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 10131:2006 | |
| Kaltgewalzte Verpackungsblecherze ugnisse - Elektrolytisch verzinnter und spezialverchromter Stahl; Deutsche Fassung prEN 10202:1997 | |
| Kaltgewalztes nicht kornorientiertes Elektroblech und -band im schlussgegluehten Zustand; Deutsche Fassung EN 10106:2007 | |
| Kompressoren und Vakuumpumpen - Sicherheitsanforderu ngen - Teil 2: Vakuumpumpen; Deutsche Fassung EN 1012-2:1996+A1:2009 | |
| Kompressoren und Vakuumpumpen - Sicherheitsanforderu ngen - Teil 3: Prozesskompressoren; Deutsche Fassung EN 1012-3:2013 | |
| Kompressoren und Vakuumpumpen, Sicherheitsanforderu ngen - Teil 1: Kompressoren; Deutsche Fassung EN 1012-1:1996 | |
| Kontinuierlich feuerverzinktes Band und Blech aus weichen Staehlen zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung prEN 10142:1998 | |
| Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Technische Lieferbedingungen; Deutsche Fassung EN 10169:2010 | |
| Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse fuer den Bauinneneinsatz; Deutsche Fassung EN 10169-3:2003 | |
| Kontinuierlich schmelztauchveredelt es Band und Blech aus weichen Staehlen zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung EN 10327:2004 | |
| Kontinuierlich schmelztauchveredelt es Blech und Band aus Stahl - Grenzabmasse und Formtoleranzen Deutsche Fassung EN 10143:2006, Berichtigung zu DIN EN 10143:2006-09 | |
| Lichtdurchlaessige, einschalige, profilierte Platten aus Kunststoff fuer Innen- und Aussenanwendungen an Daechern, Waenden und Decken - Anforderungen und Pruefverfahren; Deutsche Fassung EN 1013:2012 | |
| Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) | |
| Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets; English version of DIN EN 1013-4 | |
| Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethycryla te (PMMA) sheets; English version of DIN EN 1013-5 | |
| Light-transmitting profiled plastic sheeting for single skin roofing - Part 1: General requirements and test methods | |
| Light-transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC) | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants; German and English version EN 1009-1:2020/prA1:202 3 | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment; German and English version EN 1009-2:2020/prA1:202... | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery; German and English version EN 1009-3:2020/prA1:202 3 | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery; German and English version EN 1009-4:2020/prA1:202 3 | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery; German and English version EN... | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery | |
| Magnetic materials (iron and steel) for use in relays; English version of DIN EN 10304 | |
| Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit | |
| Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip; English version of DIN EN 10282 | |
| Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip | |
| Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies | |
| Magnetic materials - Specification for sintered soft magnetic materials | |
| Magnetische Werkstoffe - Anforderungen an Blech und Band aus Stahl mit festgelegten mechanischen und magnetischen Eigenschaften; Deutsche Fassung EN 10265:1995 | |
| Magnetische Werkstoffe - Einteilung der Isolationen auf Elektroblech und -band und daraus gefertigten Stanzteilen; Deutsche Fassung EN 10342:2005 | |
| Maschinen fuer die mechanische Aufbereitung von Mineralien und aehnlichen festen Stoffen - Sicherheit - Teil 6: Spezifische Anforderungen fuer mobile Maschinen; Deutsche und Englische Fassung prEN 1009-6:2024 | |
| Masse und Grenzabmasse von Blankstahlerzeugniss en; Deutsche Fassung EN 10278:1999 | |
| Mechanische Schwingungen - Pruefverfahren fuer bewegliche Maschinen zum Zwecke der Bestimmung des Schwingungsemissions wertes; Deutsche Fassung EN 1032:2003+A1:2008 | |
| Messung des arithmetischen Mittenrauwertes Ra und der Spitzenzahl RPc an metallischen Flacherzeugnissen; Deutsche Fassung EN 10049:2005 | |
| Metallic materials - Brinell hardness test - Test method | |
| Metallic materials - Brinell hardness test - Verification of Brinell hardness testing machines | |
| Metallic materials - Drop weight tear test | |
| Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models | |
| Metallic materials - Tube ring hydraulic pressure test | |
| Metallic materials; tube; ring tensile test | |
| Metallische Erzeugnisse - Arten von Pruefbescheinigungen (enthaelt Aenderung A1:1995); Deutsche Fassung EN 10204:1991 + A1:1995 | |
| Metallische Werkstoffe - Einachsiger Zeitstandversuch unter Zugbeanspruchung - Pruefverfahren; Deutsche Fassung EN 10291:2000 | |
| Metallische Werkstoffe - Einachsiger Zeitstandversuch unter Zugbeanspruchung - Pruefverfahren; Hinweise fuer die Anwendung der Norm | |
| Metallische Werkstoffe - Relaxationsversuch unter Zugbeanspruchung - Teil 1: Pruefverfahren fuer die Anwendung in Pruefmaschinen; Deutsche Fassung EN 10319-1:2003 | |
| Metallische Werkstoffe; Rohr; Aufweitversuch; Deutsche Fassung EN 10234:1993 | |
| Metallische Werkstoffe; Rohr; Ringfaltversuch; Deutsche Fassung EN 10233:1993 | |
| Method for the derivation of minimum values of proof strength of steel at elevated temperatures | |
| Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates; English version of DIN EN 1015-12 | |
| Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars | |
| Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) (includes Amendment A1:2006) | |
| Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) | |
| Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar | |
| Micrographic examination of the non-metallic inclusion content of steels using standard pictures | |
| Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete | |
| Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements | |
| Nahtlose kreisfoermige Stahlrohre fuer den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 2: Rohre aus nichtrostenden Staehlen; Deutsche Fassung EN 10297-2:2005, Berichtigungen zu DIN EN 10297-2:2006-02; Deutsche... | |
| Nahtlose kreisfoermige Stahlrohre fuer den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 2: Rohre aus nichtrostenden Staehlen; Deutsche Fassung EN 10297-2:2005 | |
| Nahtlose Stahlrohre fuer Druckbeanspruchungen - Technische Lieferbedingungen - Teil 2: Rohre aus unlegierten und legierten Staehlen mit festgelegten Eigenschaften bei erhoehten Temperaturen; Deutsche Fassung EN 10216-2:2002+A2:2007 | |
| Nichtrostende Staehle - Teil 1: Verzeichnis der nichtrostenden Staehle; Deutsche Fassung EN 10088-1:2005 | |
| Nichtrostende Staehle - Teil 2: Technische Lieferbedingungen fuer Blech und Band aus korrosionsbestaendig en Staehlen fuer allgemeine Verwendung; Deutsche Fassung prEN 10088-2:2011 | |
| Nichtrostende Staehle - Teil 4: Technische Lieferbedingungen fuer Blech und Band aus korrosionsbestaendig en Staehlen fuer das Bauwesen; Deutsche Fassung EN 10088-4:2009 | |
| Nichtrostende Staehle - Teil 5: Technische Lieferbedingungen fuer Staebe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugniss e aus korrosionsbestaendig en Staehlen fuer das Bauwesen; Deutsche Fassung EN 10088-5:2009 | |
| Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 | |
| Non-alloy steel rod for drawing or cold rolling - General requirements | |
| Non-alloy steel rod for drawing or cold rolling - Specific requirements for general purpose rod | |
| Non-alloy steel rod for drawing or cold rolling - Specific requirements for rimmed and rimmed substitute low carbon steel rod | |
| Non-alloy steel rod for drawing or cold rolling - Specific requirements for rod for special applications | |
| Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions | |
| Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007) | |
| Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection | |
| Non-destructive testing of steel forgings - Part 2: Penetrant testing | |
| Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings | |
| Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings | |
| Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness | |
| Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; English version of DIN... | |
| Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; English version of DIN EN 10246-11 | |
| Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; English version of DIN EN 10246-12... | |
| Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; English version of DIN EN 10246-13... | |
| Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; English version of DIN... | |
| Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; English version of... | |
| Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; English... | |
| Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; English version of DIN EN... | |
| Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; English version... | |
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; English... | |
| Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; English version of DIN... | |
| Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; English version of DIN... | |
| Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal... | |
| Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; English version of DIN EN 10246-6 | |
| Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections | |
| Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; English version of DIN... | |
| Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections; English... | |
| Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel; English version of DIN EN 10256 | |
| NON-DESTRUCTIVE TESTING TRAINING PROGRAM | |
| NONDESTRUCTIVE INSPECTION (NDI) PROGRAM PLAN | |
| Office furniture - Screens - Dimensions | |
| Office furniture - Screens - Part 2: Mechanical safety requirements; English version of DIN EN 1023-2 | |
| Office furniture - Screens - Part 3: Test methods; English version of DIN EN 1023-3 | |
| Open die steel forgings for general engineering purposes - Part 1: General requirements | |
| Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation | |
| Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation | |
| Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges | |
| Plate and wide flats made of high yield strength structural steel in the quenched and tempered or precipitation hardened condition - Delivery conditions for precipitation hardened steels | |
| Plate and wide flats made of high yield strength structural steel in the quenched and tempered or precipitation hardened condition - Delivery conditions for quenched and tempered steels | |
| Plate and wide flats made of high yield strength structural steel in the quenched and tempered or precipitation hardened condition - General delivery conditions | |
| Praezisionsstahlrohr e - Technische Lieferbedingungen - Teil 1: Nahtlose kaltgezogene Rohre; Deutsche Fassung EN 10305-1:2010 | |
| Praezisionsstahlrohr e - Technische Lieferbedingungen - Teil 2: Geschweisste kaltgezogene Rohre; Deutsche Fassung EN 10305-2:2010 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Calciumcarbonat; Deutsche Fassung EN 1018:2006, Berichtigungen zu DIN EN 1018:2006-10; Deutsche Fassung EN 1018:2006/AC:2007 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Calciumcarbonat; Deutsche Fassung EN 1018:2006 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Calciumcarbonat; Deutsche und Englische Fassung prEN 1018:2024 | |
| Pruefung von Traenkmassen fuer Teerpappen | |
| Pruefverfahren fuer Moertel fuer Mauerwerk - Teil 11: Bestimmung der Biegezug- und Druckfestigkeit von Festmoertel; Deutsche Fassung EN 1015-11:2019 | |
| Pruefverfahren fuer Moertel fuer Mauerwerk - Teil 8: Bestimmung des Wasserrueckhalteverm oegens von Frischmoertel; Deutsche Fassung prEN 1015-8:1993 | |
| Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes Amendment A1:1996); German version EN 10083-2:1991 + A1:1996 | |
| Quenched and tempered steels - Technical delivery conditions for boron steels | |
| Recommendation for welding of metallic materials - Part 2: Arc welding of ferritic steels; English version of DIN EN 1011-2 | |
| Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; English version of DIN EN 1011-3 | |
| Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; English version of DIN EN 1011-4 | |
| Recurring Hardware Requirements Verification Documentation | |
| RELIABILITY TEST PLAN | |
| Rohrgewinde fuer im Gewinde dichtende Verbindungen - Teil 3: Pruefung mit Grenzlehren; Deutsche Fassung EN 10226-3:2005, Berichtigungen zu DIN EN 10226-3:2005-05 | |
| Round steel rod for cold heading and cold extrusion - Dimensions and tolerances | |
| Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique | |
| Safety of machinery - Human physical performance - Part 1: Terms and definitions; English version of DIN EN 1005-1 | |
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009) | |
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines | |
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) | |
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009) | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines (includes Amendment A1:2009) | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for... | |
| Schweissen - Empfehlungen zum Schweissen metallischer Werkstoffe - Teil 5: Schweissen von plattierten Staehlen; Deutsche Fassung EN 1011-5:2003 | |
| Schweissen - Empfehlungen zum Schweissen metallischer Werkstoffe - Teil 8: Schweissen von Gusseisen; Deutsche Fassung EN 1011-8:2004, Berichtigung zu DIN EN 1011-8:2005-02 | |
| Schweissgeeignete Baustaehle fuer feststehende Offshore-Konstruktio nen - Technische Lieferbedingungen - Teil 1: Bleche; Deutsche Fassung EN 10225-1:2019 | |
| Schweissgeeignete Baustaehle fuer feststehende Offshore-Konstruktio nen - Technische Lieferbedingungen - Teil 2: Profile; Deutsche Fassung EN 10225-2:2019 | |
| Schweissgeeignete Baustaehle fuer feststehende Offshore-Konstruktio nen - Technische Lieferbedingungen - Teil 4: Kaltgeformte geschweisste Hohlprofile; Deutsche Fassung EN 10225-4:2019 | |
| Schweissgeeignete Baustaehle fuer feststehende Offshore-Konstruktio nen - Technische Lieferbedingungen; Deutsche Fassung EN 10225:2009 | |
| Schweissgeeignete Baustaehle fuer feststehende Offshore-Konstruktio nen; Deutsche Fassung prEN 10225:1994 | |
| Seamless and welded steel tubes - Dimensions and masses per unit length | |
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes Corrigendum 1 to English version of DIN EN 10216-5:2004-11 | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes | |
| SECURITY TEST PLAN | |
| Sicherheit von Maschinen - Menschliche koerperliche Leistung - Teil 1: Begriffe; Deutsche Fassung prEN 1005-1:1998 | |
| Sicherheit von Maschinen - Menschliche koerperliche Leistung - Teil 2: Manuelle Handhabung von Gegenstaenden in Verbindung mit Maschinen und Maschinenteilen; Deutsche Fassung EN 1005-2:2003+A1:2008 | |
| Sicherheit von Maschinen - Menschliche koerperliche Leistung - Teil 3: Empfohlene Kraftgrenzen bei Maschinenbetaetigung ; Deutsche Fassung EN 1005:2002+A1:2008 | |
| Sicherheit von Maschinen - Menschliche koerperliche Leistung - Teil 4: Bewertung von Koerperhaltungen und Bewegungen bei der Arbeit an Maschinen; Deutsche Fassung EN 1005-4:2005+A1:2008 | |
| Sicherheit von Maschinen - Sicherheitsanforderu ngen an Konstruktion und Bau von Druck- und Papierverarbeitungsm aschinen - Teil 4: Buchbinderei-, Papierverarbeitungs- und Papierveredelungsmas chinen; Deutsche Fassung EN 1010-4:2004+A1:2009 | |
| Sicherheit von Maschinen - Sicherheitstechnisch e Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausruestung - Teil 14: Rollenspaltmaschinen ; Deutsche Fassung EN 1034-14:2005+A1:2009 | |
| Sicherheit von Maschinen - Sicherheitstechnisch e Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausruestung - Teil 17: Tissuemaschinen; Deutsche Fassung EN 1034-17:2012 | |
| Spannstaehle - Teil 3: Litze; Deutsche Fassung prEN 10138-3:2000 | |
| Spannstaehle - Teil 5: Vergueteter Draht; Deutsche Fassung prEN 10138-5:1991 | |
| Spannstaehle; Teil 2: Entspannter kaltgezogener Draht; Deutsche Fassung prEN 10138-2:1991 | |
| Staehle und Nickellegierungen fuer Befestigungselemente fuer den Einsatz bei erhoehten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07 | |
| Stahl fuer die Bewehrung von Beton - Schweissgeeigneter Betonstahl - Allgemeines; Deutsche Fassung EN 10080:2005 | |
| Stahlblech und -band fuer geschweisste Gasflaschen; Deutsche Fassung EN 10120:2008 | |
| Stahldraht fuer Federn - Teil 1: Patentiert gezogener unlegierter Federstahldraht; Deutsche und Englische Fassung EN 10270-1:2011/FprA1:2 016 | |
| Stahldraht fuer Federn - Teil 2: Oelschlussverguetete r Federstahldraht; Deutsche Fassung EN 10270-2:2001 | |
| Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 5: Polyamid-beschichtet er Draht; Deutsche Fassung EN 10245-5:2011 | |
| Stahldraht und Drahterzeugnisse - Schlaucharmierungsdr aht; Deutsche Fassung EN 10324:2004, Berichtigung zu DIN EN 10324:2004-11; Deutsche Fassung EN 10324:2004/AC:2008 | |
| Stahldraht und Drahterzeugnisse - Schlaucharmierungsdr aht; Deutsche Fassung EN 10324:2004 | |
| Stahldraht und Drahterzeugnisse - Stahldraht fuer Seile - Teil 4: Draht aus nicht rostendem Stahl; Deutsche Fassung EN 10264-4:2002 | |
| Stahldraht und Drahterzeugnisse fuer Zaeune und Drahtgeflechte - Teil 8: Geschweisste Gitter fuer Steinkoerbe; Deutsche Fassung EN 10223-8:2013 | |
| Stahlguss fuer allgemeine Anwendungen; Deutsche Fassung EN 10293:2005, Berichtigung zu DIN EN 10293:2005-06; Deutsche Fassung EN 10293:2005/AC:2008 | |
| Stahlguss fuer allgemeine Anwendungen; Deutsche Fassung EN 10293:2005 | |
| Stahlguss fuer das Bauwesen; Deutsche Fassung EN 10340:2007, Berichtigung zu DIN EN 10340:2008-01; Deutsche Fassung EN 10340:2007/AC:2008 | |
| Stahlguss fuer das Bauwesen; Deutsche Fassung EN 10340:2007 | |
| Stahlguss fuer Druckbehaelter; Deutsche Fassung EN 10213:2007, Berichtigung zu DIN EN 10213:2008-01; Deutsche Fassung EN 10213:2007/AC:2008 | |
| Stahlrohre fuer Rohrleitungen fuer brennbare Medien - Technische Lieferbedingungen - Teil 2: Rohre der Anforderungsklasse B; Deutsche Fassung EN 10208-2:2009 | |
| Stainless steel bars for pressure purposes | |
| Stainless steel strip for springs - Technical delivery conditions | |
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | |
| Stainless steels - Technical delivery conditions for general purpose semi-finished products, bars, rod and sections | |
| Steel - Determination of yield strenght increase by the effect of heat treatment (Bake-Hardening-Inde x) | |
| Steel castings for pressure purposes | |
| Steel closed die forgings - General technical delivery conditions; English version of DIN EN 10254 | |
| Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel... | |
| Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; | |
| Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002) | |
| Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (includes Corrigendum AC:2000); English version of DIN EN 10222-2 | |
| Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties | |
| Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); English version of DIN EN 10222-4:1999 + A1:2001 | |
| Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; English version of DIN EN 10222-5 | |
| Steel products - Inspection documents - List of information and description | |
| Steel products with improved deformation properties perpendicular to the surface of the product; technical delivery conditions; German version of EN 10164:1993 | |
| Steel rod for drawing and/or cold rolling - Dimensions and tolerances | |
| Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels; English version of DIN EN 10263-5 | |
| Steel threaded pipe fittings; English version of DIN EN 10241 | |
| Steel tubes and fittings for on and offshore pipelines - External two-layer extruded polyethylene based coatings | |
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas | |
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating | |
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modifie d coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar | |
| Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection | |
| Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes | |
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems | |
| Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes | |
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems | |
| Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards | |
| Steel wire and wire products - Bead wire | |
| Steel wire and wire products - General - Test methods | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; English version of DIN EN 10244-3 | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; English version of DIN EN 10244-4 | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; Enlgish version of DIN EN 10244-5 | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; Enlgish version of DIN EN 10244-6 | |
| Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire | |
| Steel wire and wire products - Organic coatings on wire - Part 1: General rules; English version of DIN EN 10245-1 | |
| Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; English version of DIN EN 10245-2 | |
| Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; English version of DIN EN 10245-3 | |
| Steel wire and wire products - Steel wire for ropes - Part 1: General requirements | |
| Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloyed steel wire for ropes for general applications | |
| Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications | |
| Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire | |
| Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes (includes Amendment A1:2004) | |
| Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes | |
| Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing | |
| Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing | |
| Steel wire and wire products for fences - Part 6: Steel wire chain link fencing | |
| Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing | |
| Steel wire and wire products: General - Wire dimensions and tolerances | |
| Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire; English version of DIN EN 10270-1 | |
| Steel wire for mechanical springs - Part 3: Stainless spring steel wire; English version of DIN EN 10270-3 | |
| Steel wire nails - Part 1: Loose nails for general applications | |
| Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (includes Amendment A1:2006 and Corrigenda Ber 1:2006-10 + Ber 2:2007-02) | |
| Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; Corrigendum 3 to English version of DIN EN 10269:2006 | |
| Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels; Corrigendum 1 to English version of DIN EN 10083-3:2007-01 | |
| Steels for simple pressure vessels - Technical delivery conditions for plate, strip and bars (includes Amendment A1:1997) | |
| Structural steel equal and unequal leg angles - Part 1: Dimensions | |
| Structural steel equal and unequal leg angles; tolerances on shape and dimensions | |
| Structural steel I and H sections; tolerances on shape and dimensions | |
| Structural steels with improved atmospheric corrosion resistance; technical delivery conditions; German version EN 10155:1993 | |
| Surface quality classes for hot rolled steel bars and rod - Technical delivery conditions | |
| Technische Lieferbedingungen fuer Stahlguss fuer Druckbehaelter - Teil 4: Austenitische und austenitisch-ferriti sche Stahlsorten; Deutsche Fassung EN 10213-4:1995 | |
| Tempergussfittings mit Klemmanschluessen fuer Polyethylen(PE)-Rohr leitungssysteme; Deutsche und Englische Fassung prEN 10284:2023 | |
| Tempergussfittings mit Klemmanschluessen fuer Polyethylen-(PE-)Roh rleitungssysteme; Deutsche Fassung EN 10284:2000 | |
| Tensile testing of metallic materials - Part 4: Verification of extensometers used in uniaxial testing - Examples for extensometers and their verification | |
| Tensile testing of metallic materials - Verification of extensometers used in uniaxial testing | |
| Tensile testing of metallic materials; method of test at ambient temperature (English version of DIN EN 10002 Part 1) | |
| Tensile testing of metallic materials; method of test at elevated temperature (English version of DIN EN 10002 Part 2) | |
| Thin magnetic steel sheet and strip for use at medium frequencies; English version of DIN EN 10303 | |
| Threaded pipe fitting in malleable cast iron; Amendment A2 | |
| Threaded pipe fitting in malleable cast iron | |
| Ultrasonic Test (UT) Report | |
| Ultrasonic testing of steel flat products of thickness equal or greater than 6 mm (reflection method) | |
| Valve steels and alloys for internal combustion engines | |
| Verg\xfctungsst\xe4h le Teil 1: Technische Lieferbedingungen f\xfcr Edelst\xe4hle | |
| Verpackungsblech - Flacherzeugnisse aus Stahl fuer die Verwendung in Beruehrung mit Lebensmitteln, Produkten und Getraenken fuer den menschlichen und tierischen Verzehr - Unbeschichteter Stahl (Feinstblech); Deutsche Fassung EN 10334:2005 | |
| Verpackungsblech - Flacherzeugnisse aus Stahl fuer die Verwendung in Beruehrung mit Lebensmitteln, Produkten und Getraenken fuer den menschlichen und tierischen Verzehr - Unbeschichteter Stahl (Feinstblech); Deutsche und Englische Fassung prEN... | |
| Verpackungsblech - Flacherzeugnisse aus Stahl fuer die Verwendung in Beruehrung mit Lebensmitteln, Produkten und Getraenken fuer den menschlichen und tierischen Verzehr - Verzinnter Stahl (Weissblech); Deutsche Fassung EN 10333:2005 | |
| Verpackungsblech - Flacherzeugnisse aus Stahl fuer die Verwendung in Beruehrung mit Lebensmitteln, Produkten und Getraenken fuer den menschlichen und tierischen Verzehr - Verzinnter Stahl (Weissblech); Deutsche und Englische Fassung prEN... | |
| VIBRATION SURVEY REPORT | |
| Walzdraht, Staebe und Draht aus Kaltstauch- und Kaltfliesspressstaeh len - Teil 1: Allgemeine technische Lieferbedingungen; Deutsche Fassung EN 10263-1:2001 | |
| Walzdraht, Staebe und Draht aus Kaltstauch- und Kaltfliesspressstaeh len - Teil 2: Technische Lieferbedingungen fuer nicht fuer eine Waermebehandlung nach der Kaltverarbeitung vorgesehene Staehle, Deutsche Fassung prEN 10263-2:2014 | |
| Walzdraht, Staebe und Draht aus Kaltstauch- und Kaltfliesspressstaeh len - Teil 2: Technische Lieferbedingungen fuer nicht fuer eine Waermebehandlung nach der Kaltverarbeitung vorgesehene Staehle; Deutsche Fassung EN 10263-2:2001 | |
| Walzdraht, Staebe und Draht aus Kaltstauch- und Kaltfliesspressstaeh len - Teil 3: Technische Lieferbedingungen fuer Einsatzstaehle; Deutsche Fassung EN 10263-3:2001 | |
| Walzdraht, Staebe und Draht aus Kaltstauch- und Kaltfliesspressstaeh len - Teil 4: Technische Lieferbedingungen fuer Verguetungsstaehle; Deutsche Fassung EN 10263-4:2001 | |
| Warmfeste Staehle, Nickel- und Cobaltlegierungen; Deutsche Fassung EN 10302:2008 | |
| Warmgefertigte Hohlprofile fuer den Stahlbau - Teil 3: Technische Lieferbedingungen fuer hoeher- und wetterfeste Staehle; Deutsche Fassung EN 10210-3:2020 | |
| Warmgewalzte Erzeugnisse aus Baustaehlen - Teil 2: Technische Lieferbedingungen fuer unlegierte Baustaehle; Deutsche Fassung EN 10025-2:2004 | |
| Warmgewalzte Erzeugnisse aus Baustaehlen - Teil 3: Technische Lieferbedingungen fuer normalgegluehte/norm alisierend gewalzte schweissgeeignete Feinkornbaustaehle; Deutsche Fassung EN 10025-3:2004 | |
| Warmgewalzte Flacherzeugnisse aus Staehlen mit hoher Streckgrenze zum Kaltumformen - Teil 1: Allgemeine Lieferbedingungen; Deutsche Fassung prEN 10149-1:2011 | |
| Warmgewalzte Flacherzeugnisse aus Staehlen mit hoher Streckgrenze zum Kaltumformen - Teil 3: Lieferbedingungen fuer normalgegluehte oder normalisierend gewalzte Staehle; Deutsche Fassung prEN 10149-3:2011 | |
| Warmgewalzte Rundstaebe aus Stahl - Masse, Formtoleranzen und Grenzabmasse; Deutsche Fassung EN 10060:2003 | |
| Warmgewalzte Spundbohlen aus unlegierten Staehlen - Teil 2: Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 10248-2:1995 | |
| Warmgewalzte und kaltgewalzte Flacherzeugnisse ohne Ueberzug aus Mehrphasenstaehlen zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung EN 10338:2015 | |
| Warmgewalzte und kaltgewalzte unbeschichtete Erzeugnisse aus Mehrphasenstaehlen zum Kaltumformen - Technische Lieferbedingungen; Deutsche Fassung prEN 10338:2010 | |
| Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections | |
| Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (includes Admendment A1:2005) | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | |
| Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding | |
| Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding | |
| Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding | |
| Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons | |
| Windows and doors - Air permeability - Test method; English version of DIN EN 1026 | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1 : Procedure for sampling creosote | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote | |
| Zerstoerungsfreie Pruefung - Ultraschallpruefung von Flacherzeugnissen aus austenitischem und austenitisch-ferriti schem nichtrostendem Stahl ab 6 mm Dicke (Reflexionsverfahren ); Deutsche Fassung EN 10307:2001 | |
| Zerstoerungsfreie Pruefung - Ultraschallpruefung von Flacherzeugnissen aus austenitischem und austenitisch-ferriti schem nichtrostendem Stahl ab 6 mm Dicke (Reflexionsverfahren ); Deutsche und Englische Fassung prEN 10307:2025 | |
| Zerstoerungsfreie Pruefung - Ultraschallpruefung von Staeben aus Stahl; Deutsche Fassung EN 10308:2001 | |
| Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables | |
| Zinc or zinc alloy-coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| << Prev | Next >> |