Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
200
250
300
350
400
450
490
500
510
520
530
540
547
548
549
550
551
552
553
554
555
556
557
558
559
560
570
580
590
600
610
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fuegenaehte - Teil 2: Kunststoff- und Elastomerbahnen fuer Dachabdichtungen; Deutsche Fassung EN 12317-2:2010 | |
| Abdichtungsbahnen - Bestimmung des Zug-Dehnungsverhalte ns - Teil 2: Kunststoff- und Elastomerbahnen fuer Dachabdichtungen; Deutsche Fassung EN 12311-2:2010 | |
| Abdichtungsbahnen - Teil 1: Bitumenbahnen fuer Dachabdichtungen - Bestimmung des Weiterreisswiderstan des (Nagelschaft); Deutsche und Englische Fassung prEN 12310-1:2023 | |
| Abdichtungsbahnen - Teil 1: Bitumenbahnen fuer Dachabdichtungen; Bestimmung des Weiterreisswiderstan des (Nagelschaft); Deutsche Fassung EN 12310-1:1999 | |
| Abschirmungen an Laserarbeitsplaetzen - Sicherheitstechnisch e Anforderungen und Pruefung; Deutsche Fassung EN 12254:1998+A2:2008, Berichtigung zu DIN EN 12254:2008-04 | |
| Abschirmungen an Laserarbeitsplaetzen - Sicherheitstechnisch e Anforderungen und Pruefung; Deutsche Fassung EN 12254:2010 | |
| Abschluesse - Terminologie, Benennungen und Definitionen; Dreisprachige Fassung EN 12216:2018 | |
| Accelerated ageing tests applicable to rubber- or plastics-coated fabric - Part 1: Heat ageing | |
| Adhesives - Determination of acid value | |
| Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates | |
| Adhesives - Determination of hydroxyl value and/or hydroxyl content | |
| Adhesives - Determination of isocyanate content | |
| Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light | |
| Adhesives - Freeze-thaw stability | |
| Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements; English version of DIN EN 12436 | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties | |
| AIDC technologies - Symbology specifications - Code 16K | |
| Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity | |
| Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level... | |
| Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages,... | |
| Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods | |
| Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers | |
| Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitat ed passenger boarding vehicles (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles; German and English version EN 12312-3:2017 | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | |
| Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms (includes Amendment A1:2009) | |
| Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders | |
| Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus | |
| Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20\xb0, 45\xb0, 60\xb0 or 85\xb0; English version... | |
| Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; English version of DIN EN 12373-12 | |
| Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; English version of DIN EN 12373-19 | |
| Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method | |
| Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance | |
| Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus | |
| Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN 12258-1:2012 | |
| Aluminium and aluminium alloys - Wrought stock products - Special requirements for products intended for the production of pressure equipment; English version of DIN EN 12392 | |
| Aluminium und Aluminium-Legierunge n - Knet- und Gusserzeugnisse - Besondere Anforderungen an Erzeugnisse fuer die Fertigung von Druckgeraeten; Deutsche und Englische Fassung prEN 12392:2024 | |
| Aluminium und Aluminiumlegierungen - Anodisieren - Teil 4: Abschaetzung der Anfaerbbarkeit von anodisch erzeugten Oxidschichten nach dem Verdichten durch Farbtropfentest mit vorheriger Saeurebehandlung; Deutsche Fassung EN 12373-4:1998 | |
| Anlagen zur Verkehrssteuerung - Warn- und Sicherheitsleuchten; Deutsche Fassung EN 12352:2006 | |
| Artikel fuer Saeuglinge und Kleinkinder - Wickeleinheiten und Wickelauflagen fuer den Hausgebrauch - Sicherheitstechnisch e Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 12221:2023 | |
| Atemschlaeuche zur Verwendung mit Anaesthesie- und Beatmungsgeraeten; Deutsche Fassung EN 12342:1998+A1:2009 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 1: Definitionen, Klassifizierung, allgemeine Baugrundsaetze, Leistungsanforderung en und Pruefverfahren; Deutsche Fassung EN 124-1:2015 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 3: Aufsaetze und Abdeckungen aus Stahl oder Aluminiumlegierungen ; Deutsche Fassung EN 124-3:2015 | |
| Aufsaetze und Abdeckungen fuer Verkehrsflaechen - Teil 4: Aufsaetze und Abdeckungen aus Stahlbeton; Deutsche Fassung EN 124-4:2015 | |
| Bauakustik - Berechnung der akustischen Eigenschaften von Gebaeuden aus den Bauteileigenschaften - Teil 5: Installationsgeraeus che; Deutsche Fassung EN 12354-5:2009/AC:2010 | |
| Bauakustik - Berechnung der akustischen Eigenschaften von Gebaeuden aus den Bauteileigenschaften - Teil 5: Installationsgeraeus che; Deutsche Fassung EN 12354-5:2009 | |
| Bauaufzuege fuer den Materialtransport - Teil 2: Schraegaufzuege mit nicht betretbaren Lastaufnahmemitteln; Deutsche Fassung EN 12158-2:2000 | |
| Biotechnology - Equipment - Guidance on procedures for testing leaktightness; German version EN 12298:1998 | |
| Biotechnology - Equipment - Guidance on testing procedures for cleanability; German version EN 12296:1998 | |
| Biotechnology - Equipment - Guidance on testing procedures for sterilizability; German version EN 12297:1998 | |
| Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination | |
| Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements; German version EN 12128:1998 | |
| Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plants | |
| Biotechnology - Performance criteria for steam sterilizers and autoclaves | |
| Builders hoists for persons and materials with vertically guided cages (includes Amendment A1:2009) | |
| Builders' hoists for goods - Part 1: Hoists with accessible platforms; English version of DIN EN 12158-1 | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms; English version of DIN EN 12354-1 | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; English version of DIN EN 12354-2 | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; English version of DIN EN 12354-3 | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; English version of DIN EN 12354-4... | |
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification | |
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods | |
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method | |
| Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method | |
| Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; Corrigenda 1 to DIN EN 12209:2004-03 | |
| Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods | |
| Building hardware - Padlocks and padlock fittings - Requirements and test methods; English version of DIN EN 12320 | |
| Changing units for domestic use - Part 2: Test methods | |
| Characterization of sludge - Determination of pH-value | |
| Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, mycobactericidal, sporicidal and fungicidal activity | |
| Chemicals used for treatment of water intended for human consumption - Ammonium sulfate | |
| Chemicals used for treatment of water intended for human consumption - Copper sulfate | |
| Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid | |
| Chemicals used for treatment of water intended for human consumption - Liquefied ammonia | |
| Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium disulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium fluoride | |
| Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium sulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate | |
| Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements (includes Amendment A1:2009) | |
| Copper and copper alloys - Determination of spring bending limit on strip | |
| Copper and copper alloys - Forgings | |
| Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); English version of DIN EN 12168:1998 + A1:2000 | |
| Copper and copper alloys - Rod for free machining purposes | |
| Copper and copper alloys - Rod for general purposes | |
| Copper and copper alloys - Wire for general purposes | |
| Copper and copper alloys - Wrought and unwrought forging stock | |
| Core drilling machines on stand - Safety (includes Amendment A1:2009) | |
| Core drilling machines on stand - Safety; German and English version prEN 12348:2023 | |
| Cryogenic vessels - Cleanliness for cryogenic service | |
| Cryogenic vessels - Crogenic flexible hoses; English version of DIN EN 12434 | |
| Cryogenic vessels - Methods for performance evaluation of thermal insulation | |
| Curtain walling - Resistance to wind load - Test method; English version of DIN EN 12179 | |
| Curtain walling - Watertightness - Laboratory test under static pressure; English version of DIN EN 12155 | |
| Curtain walling - Watertightness - Performance requirements and classification; English version of DIN EN 12154 | |
| Determination of chromium content of water by atomic absorption spectrometry | |
| Determination of moisture content in thermoplastics by coulometry | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test; English version of DIN EN 12269-1 | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test | |
| Direct gas-fired washing machines of heat input not exceeding 20 kW - Part 1: Safety | |
| Direct gas-fired washing machines of heat input not exceeding 20 kW - Part 2: Rational use of energy; German version EN 12244-2:1998 | |
| Doors - Climatic influences - Requirements and classification; English version of DIN EN 12219 | |
| Doors - Operating forces - Requirements and classification | |
| Drahtseile aus Stahldraht - Sicherheit - Teil 1: Allgemeine Anforderungen; Deutsche Fassung EN 12385-1:2002+A1:2008 | |
| Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile fuer allgemeine Hebezwecke; Deutsche Fassung EN 12385-4:2002+A1:2008 | |
| Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile fuer allgemeine Hebezwecke; Deutsche Fassung EN 12385-4:2002+A1:2008 , Berichtigung zu DIN EN 12385-4:2008-06 | |
| Drahtseile aus Stahldraht - Sicherheit - Teil 5: Litzenseile fuer Aufzuege; Deutsche und Englische Fassung EN 12385-5:2021/prA1:20 24 | |
| Durability of wood and wood-based products - Assessment of the effectiveness of masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray -... | |
| Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods | |
| Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test (includes Amendment A1:2003) | |
| Feather and down - Methods of testing the down-proof properties of fabrics - Part 1: Rubbing test | |
| Feather and down - Test methods - Determination of the filling power (massic volume) | |
| Federn und Daunen - Pruefverfahren - Bestimmung der quantitativen Zusammensetzung von Federn und Daunen (manuelles Verfahren); Deutsche Fassung EN 12131:2018 | |
| Federn und Daunen - Pruefverfahren - Bestimmung der quantitativen Zusammensetzung von Federn und Daunen (manuelles Verfahren); Deutsche und Englische Fassung prEN 12131:2025 | |
| Fenster und Tueren - Widerstandsfaehigkei t bei Windlast - Klassifizierung (enthaelt Berichtigung AC:2002); Deutsche Fassung EN 12210:1999 + AC:2002 | |
| Fertilizers - Determination of bulk density (loose) (ISO 3944:1992, modified) | |
| Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992, modified) | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 13: ESFR sprinklers | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms (includes Amendment A1:2001); English version of DIN EN 12259-4:2000 + A1:2001 | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge alarm valves | |
| Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastics and rubber sheets for roof waterproofing; English version of DIN EN 12316-2 | |
| Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12310-2 | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties | |
| Food processing machinery - Band saw machines - Safety and hygiene requirements | |
| Food processing machinery - Circular saw machines - Safety and hygiene requirements | |
| Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements | |
| Food processing machinery - Mincing machines - Safety and hygiene requirements | |
| Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; Corrigendum 1 to English verion of DIN EN 12203:2004-07 | |
| Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements | |
| Fruit and vegetable juices - Determination of centrifugable pulp content | |
| Fruit and vegetable juices - Determination of chloride content by the potentiometric titration method | |
| Fruit and vegetable juices - Determination of hesperidin and naringin in citrus juices - Method using high performance liquid chromatography; German version EN 12148:1996 | |
| Fruit and vegetable juices - Determination of nitrogen content by the Kjeldahl method | |
| Fruit and vegetable juices - Determination of soluble solids content by the refractometric method | |
| Fruit and vegetable juices - Determination of tartaric acid in grape juices by high performance liquid chromatography | |
| Fruit and vegetable juices - Determination of titrable acidity | |
| Fruit and vegetable juices - Determination of total alkalinity of ash by the titrimetric method | |
| Fruit and vegetable juices - Determination of total carotenoid content and individual carotenoid fractions | |
| Fruit and vegetable juices - Determination of total dry matter by the gravimetric method with loss of mass on drying | |
| Fruit and vegetable juices - Enzymatic determination of D-malic acid content by the NAD spectrometric method | |
| Fruit and vegetable juices - Enzymatic determination of sucrose content - NADP spectrometric method; German version EN 12146:1996 | |
| Gas infrastructure - Gas pressure control stations for transmission and distribution - Functional requirements; German and English version prEN 12186:2025 | |
| Gas meters - Conversion devices - Part 1: Volume conversion (includes Amendment A1:2006) | |
| Gas meters - Conversion devices - Part 2: Energy conversion | |
| Gas meters - Conversion devices - Part 3: Flow computer | |
| Gas meters - Turbine gas meters (includes Amendment A1:2006) | |
| Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements | |
| Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements Corrigendum 1 to English version of DIN EN 12186:2006-01 | |
| Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements | |
| Gas supply systems - Pressure testing, commissioning and decomissioning procedures - Functional requirements; English version of DIN EN 12327 | |
| Gas-fired absorption and adsorption air conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 4: Test methods | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Specific provisions for hybrid appliances | |
| Gasbefeuerte Absorptions- und Adsorptions-Klimager aete und/oder Waermepumpengeraete mit einer Nennwaermebelastung nicht ueber 70 kW - Teil 2: Rationelle Energieanwendung; Deutsche Fassung EN 12309-2:2000 | |
| Gasbefeuerte Sorptions-Geraete fuer Heizung und/oder Kuehlung mit einer Nennwaermebelastung nicht ueber 70 kW - Teil 3: Anforderungen und Pruefbedingungen; Deutsche und Englische Fassung prEN 12309-3:2022 | |
| Gasbefeuerte Sorptions-Geraete fuer Heizung und/oder Kuehlung mit einer Nennwaermebelastung nicht ueber 70 kW - Teil 3: Pruefbedingungen; Deutsche Fassung EN 12309-3:2014 | |
| Gasbefeuerte Sorptions-Geraete fuer Heizung und/oder Kuehlung mit einer Nennwaermebelastung nicht ueber 70 kW - Teil 4: Pruefverfahren; Deutsche Fassung EN 12309-4:2015, Berichtigung zu DIN EN 12309-4:2015-03 | |
| Gasbefeuerte Sorptions-Geraete fuer Heizung und/oder Kuehlung mit einer Nennwaermebelastung nicht ueber 70 kW - Teil 5: Anforderungen; Deutsche Fassung EN 12309-5:2014 | |
| Gasbefeuerte Sorptions-Geraete fuer Heizung und/oder Kuehlung mit einer Nennwaermebelastung nicht ueber 70 kW - Teil 6: Berechnung der saisonalen Effizienzkennzahlen; Deutsche Fassung EN 12309-6:2014 | |
| Gebaeudearmaturen - Absperrventile aus Kupferlegierungen fuer Trinkwasseranlagen in Gebaeuden - Pruefungen und Anforderungen; Deutsche Fassung EN 1213:1999 | |
| Geotextiles and geotextile-related products - Determination of the resistance to weathering; English version of DIN EN 12224 | |
| Geotextiles and geotextile-related products - General tests for evaluation following durability testing; English version of DIN EN 12226 | |
| Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000 | |
| Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; English version of DIN EN 12337-1 | |
| Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description; English version of DIN EN 12150-1 | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness | |
| Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection | |
| Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking and quality control | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron | |
| Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods | |
| Gymnastic equipment - Horizontal bars - Safety requirements and test methods | |
| Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods | |
| Health informatics - Time standards for healthcare specific problems; English version EN 12381:2005 | |
| Heating systems in buildings - Procedure for the preparation of document for operation, maintenance and use - Heating systems not requiring a trained operator | |
| Heating systems in buildings - Procedure for the preparation of document in respect of operation, maintenance and use - Heating systems requiring a trained operator | |
| Holzwerkstoffe - Charakteristische Werte fuer die Berechnung und Bemessung von Holzbauwerken - Teil 1: OSB, Spanplatten und Faserplatten; Deutsche Fassung EN 12369-1:2001 | |
| Holzwerkstoffe - Charakteristische Werte fuer die Berechnung und Bemessung von Holzbauwerken - Teil 1: OSB, Spanplatten und Faserplatten; Deutsche und Englische Fassung prEN 12369-1:2024 | |
| Holzwerkstoffe - Charakteristische Werte fuer die Berechnung und Bemessung von Holzbauwerken - Teil 3: Massivholzplatten; Deutsche Fassung EN 12369-3:2008 | |
| In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology | |
| In-vitro-Diagnostika - Kulturmedien fuer die Mikrobiologie - Leistungskriterien fuer Kulturmedien; Deutsche Fassung EN 12322:1999 | |
| Industrial valves - Cast iron check valves | |
| Industrial valves - Protective caps for valves with flanged connections | |
| Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German and English version prEN 12266-1:2025 | |
| Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements | |
| Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements | |
| Industrial, commercial and garage doors and gates - Air permeability - Classification; English version of DIN EN 12426 | |
| Industrial, commercial and garage doors and gates - Air permeability - Test method; English version of DIN EN 12427 | |
| Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; English version of DIN EN 12425 | |
| Industrial, commercial and garage doors and gates - Resistance to wind load - Classification; English version of DIN EN 12424 | |
| Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; English version of DIN EN 12428 | |
| Industriearmaturen - Schieber aus Kupferlegierungen; Deutsche Fassung EN 12288:2010 | |
| Inland navigation vessels - Rope tubs | |
| Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping | |
| Irrigation techniques - Centre pivot and moving lateral systems - Part 1: Presentation of the technical characteristics | |
| Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimum performances and technical characteristics | |
| Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminology and classification | |
| Irrigation techniques - Reel machine systems - Part 1: Size series | |
| Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines | |
| Irrigation techniques - Reel machine systems - Part 3: Presentation of technical characteristics | |
| Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements | |
| Klaeranlagen - Teil 1: Allgemeine Baugrundsaetze; Deutsche Fassung EN 12255-1:2002 | |
| Klaeranlagen - Teil 2: Niederschlagsmanagem entsysteme; Deutsche und Englische Fassung prEN 12255-2:2024 | |
| Klebstoffe - Bestimmung des Erweichungspunktes von thermoplastischen Klebstoffen (Ring und Kugel); Deutsche Fassung EN 1238:1999 | |
| Korrosionsschutz von Metallen - Galvanische Zinkueberzuege auf Eisenwerkstoffen mit zusaetzlicher Behandlung; Deutsche Fassung EN 12329:2000 | |
| Kunststoff- und Gummimaschinen - Warmformmaschinen - Sicherheitsanforderu ngen; Deutsche Fassung EN 12409:2008 | |
| Kunststoff-Rohrleitu ngssysteme - Rohre aus Polyethylen (PE) - Bestimmung der Widerstandsfaehigkei t gegen Innendruck nach Abquetschen; Deutsche Fassung EN 12106:1997 | |
| Kunststoff-Rohrleitu ngssysteme - Rohre aus Polyethylen (PE) - Bestimmung der Widerstandsfaehigkei t gegen Innendruck nach Abquetschen; Deutsche und Englische Fassung prEN 12106:2024 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Wasserversorgung und fuer Entwaesserungs- und Abwasserdruckleitung en - Polyethylen (PE) - Teil 5: Gebrauchstauglichkei t des Systems; Deutsche Fassung EN 12201-5:2011 | |
| Kupfer und Kupferlegierungen - Profile und Rechteckstangen zur allgemeinen Verwendung; Deutsche Fassung EN 12167:1998 | |
| Ladungssicherung auf Strassenfahrzeugen - Sicherheit - Teil 1: Berechnung von Sicherungskraeften; Deutsche Fassung EN 12195-1:2010, Berichtigung zu DIN EN 12195-1:2011-06; Deutsche Fassung EN 12195-1:2010/AC:2014 | |
| Ladungssicherungsein richtungen auf Strassenfahrzeugen - Sicherheit - Teil 3: Zurrketten; Deutsche Fassung EN 12195-3:2001 | |
| Lead and lead alloys - Methods of sampling for analysis | |
| Licht und Beleuchtung - Sportstaettenbeleuch tung; Deutsche Fassung EN 12193:2007 | |
| Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography | |
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing (includes Amendment A1:2009) | |
| Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of lashing forces | |
| Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; English version of DIN EN 12195-2 | |
| Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes | |
| LPG equipment and accessories - Equipping of LPG road tankers (includes Amendment A1:2008) | |
| LPG equipment and accessories - Equipping of LPG road tankers; German and English version EN 12252:2022/prA1:2024 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 10: Container-/Paletten- Transfer-Transporter ; Deutsche Fassung EN 12312-10:2005+A1:200 9 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 13: Toiletten-Serviceger aete; Deutsche Fassung EN 12312-13:2002+A1:200 9 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 20: Ausruestung zur Bodenstromversorgung ; Deutsche Fassung EN 12312-20:2005+A1:200 9 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 20: Ausruestung zur Bodenstromversorgung ; Deutsche und Englische Fassung prEN 12312-20:2025 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 2: Catering-Hubfahrzeug e; Deutsche Fassung EN 12312-2:2002+A1:2009 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 4: Fluggastbruecken; Deutsche Fassung EN 12312-4:2003+A1:2009 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 5: Betankungseinrichtun gen fuer Luftfahrzeuge; Deutsche und Englische Fassung EN 12312-5:2021/prA1:20 23 | |
| Luftfahrt-Bodengerae te - Besondere Anforderungen - Teil 7: Luftfahrzeug-Schlepp geraete; Deutsche Fassung EN 12312-7:2005+A1:2009 | |
| Luftkonditionierer, Fluessigkeitskuehlsa etze, Waermepumpen, Prozesskuehler und Entfeuchter mit elektrisch angetriebenen Verdichtern - Bestimmung des Schallleistungspegel s - Teil 2: Waermepumpen-Wassere rwaermer; Deutsche Fassung EN 12102-2:2019 | |
| Magnesium and magnesium alloys - Magnesium alloys for cast anodes; German version EN 12538:1998 | |
| Magnesium and magnesium alloys - Unalloyed magnesium | |
| Manual wheelchairs - Requirements and test methods | |
| Maschinen und Anlagen zur Bereitung von Beton und Moertel - Sicherheitsanforderu ngen; Deutsche Fassung EN 12151:2007 | |
| Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Schuhreparaturmaschi nen - Sicherheitsanforderu ngen; Deutsche Fassung EN 12387:2005+A1:2009 | |
| Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) | |
| Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles | |
| Mountaineering equipment - Chocks - Safety requirements and test methods | |
| Mountaineering equipment - Connectors - Safety requirements and test methods | |
| Mountaineering equipment - Frictional anchors - Safety requirements and test methods | |
| Mountaineering equipment - Harnesses - Safety requirements and test methods | |
| Mountaineering equipment - Pulleys - Safety requirements and test methods | |
| Natural stone test methods - Determination of flexural strength under concentrated load | |
| Natural stone test methods - Determination of frost resistance | |
| Natural stone test methods - Petrographic examination | |
| Naturstein - Kriterien fuer die Bezeichnung; Deutsche Fassung EN 12440:2008 | |
| Non-destructive testing - Ultrasonic examination - Specification for calibration block No 1 | |
| Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 1: Spectrometric method | |
| Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 2: Gas chromatographic method | |
| Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; English version of DIN EN 12396-3 | |
| Oberflaechenbehandlu ng - Pruefverfahren - Teil 1: Dosierung und Querverteilung von Bindemitteln und Gesteinskoernung; Deutsche und Englische Fassung prEN 12272-1:2024 | |
| Oberflaechenbehandlu ng - Pruefverfahren - Teil 1: Dosierung und Querverteilung von Bindemitteln und Splitt; Deutsche Fassung EN 12272-1:2002 | |
| Oberflaechenbehandlu ng - Pruefverfahren - Teil 3: Bestimmung des Adhaesionsvermoegens von Bindemitteln und Gesteinskoernung mit dem Schlagpruefverfahren ; Deutsche Fassung EN 12272-3:2003 | |
| Oberflaechenbehandlu ng - Pruefverfahren - Teil 3: Bestimmung des Adhaesionsvermoegens von Bindemitteln und Gesteinskoernung mit dem Schlagpruefverfahren ; Deutsche und Englische Fassung prEN 12272-3:2024 | |
| Oropharyngeal airways | |
| Ortsbewegliche Gasflaschen - Vollumwickelte Flaschen aus Verbundwerkstoffen; Deutsche Fassung EN 12245:2009 | |
| Ortsfeste Brandbekaempfungsanl agen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 12: Sprinklerpumpen; Deutsche Fassung EN 12259-12:2023 | |
| Ortsfeste Brandbekaempfungsanl agen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 14: Sprinkler fuer die Anwendung im Wohnbereich; Deutsche Fassung EN 12259-14:2020 | |
| Ortsfeste Brandbekaempfungsanl agen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 15: Schirm-Sprinkler mit einem k-Faktor von mindestens K160, Weitwurf-Sprinkler von mindestens K80 und Sprinkler fuer spezielle Anwendungen im Regelbetrieb; | |
| Ortsfeste Brandbekaempfungsanl agen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 15: Sprinkler mit einem k-Faktor von mindestens K160, Sprinkler mit erweiterter Reichweite von mindestens K80 und Sprinkler fuer spezielle... | |
| Ortsfeste Brandbekaempfungsanl agen - Pulverloeschanlagen - Teil 1: Anforderungen und Pruefverfahren fuer Bauteile; Deutsche Fassung EN 12416-1:2001+A2:2007 | |
| Ortsfeste Brandbekaempfungsanl agen - Pulverloeschanlagen - Teil 2: Planung, Einbau und Wartung; Deutsche Fassung EN 12416-2:2001+A1:2007 | |
| Ortsfeste Loeschanlagen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 2: Nassalarmventil mit Zubehoer (enthaelt Aenderung A1:2001); Deutsche Fassung EN 12259-2:1999 + A1:2001 | |
| Ortsfeste Loeschanlagen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 3: Trockenalarmventile mit Zubehoer (enthaelt Aenderung A1:2001); Deutsche Fassung EN 12259-3:2000 + A1:2001 | |
| Ortsfeste Loeschanlagen - Bauteile fuer Sprinkler- und Spruehwasseranlagen - Teil 3: Trockenalarmventile mit Zubehoer - (enthaelt Aenderung A1:2001); Deutsche Fassung EN 12259-3:2000 + A1:2001, Berichtigung zu DIN EN 12259-3:2001-08 | |
| Packaging - Flexible aluminium tubes - Wall thickness determination method | |
| Packaging - Flexible tubes - Terminology | |
| Packaging - Flexible tubes - Test method for the tightness of closures | |
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder | |
| Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour; English version of DIN EN 1230-1 | |
| Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) | |
| Pflanzliche Lebensmittel - Multiverfahren zur gaschromatographisch en Bestimmung von Pestizidrueckstaende n - Teil 1: Allgemeines; Deutsche Fassung EN 12393-1:2008 | |
| Pflanzliche Lebensmittel - Multiverfahren zur gaschromatographisch en Bestimmung von Pestizidrueckstaende n - Teil 2: Verfahren zur Extraktion und Reinigung; Deutsche Fassung EN 12393-2:2008 | |
| Pflanzliche Lebensmittel - Multiverfahren zur gaschromatographisch en Bestimmung von Pestizidrueckstaende n - Teil 3: Verfahren zur Bestimmung und Absicherung; Deutsche Fassung EN 12393-3:2008 | |
| Plastics and rubber machines - Calenders - Safety requirements (includes Amendment A1:2008) | |
| Plastics fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships | |
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling | |
| Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; English version of DIN EN 12201-4 | |
| Plastics rainwater piping systems for above-ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; English version of DIN EN 12200-1 | |
| Playpens for domestic use - Safety requirements and test methods | |
| Polypropylen-Bindega rne; Deutsche Fassung EN 12423:1999 | |
| Printing and business paper - Determination of toner adhesion | |
| Printing and business paper - Requirements for copy paper for dry toner imaging processes | |
| Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar | |
| Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterization of structural bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Ammoniakloesung; Deutsche Fassung EN 12122:2024 | |
| Pruefung von Beton - Bestimmung der Konsistenz - Ausbreitversuch; Deutsche Fassung prEN 12358:1996 | |
| Pruefung von Festbeton - Teil 10: Bestimmung des Karbonatisierungswid erstandes von Beton bei atmosphaerischer Konzentration von Kohlenstoffdioxid; Deutsche Fassung EN 12390-10:2018 | |
| Pruefung von Festbeton - Teil 10: Bestimmung des Karbonatisierungswid erstandes von Beton bei atmosphaerischer Konzentration von Kohlenstoffdioxid; Deutsche und Englische Fassung prEN 12390-10:2025 | |
| Pruefung von Festbeton - Teil 11: Bestimmung des Chloridwiderstandes von Beton - Einseitig gerichtete Diffusion; Deutsche Fassung EN 12390-11:2015 | |
| Pruefung von Festbeton - Teil 11: Bestimmung des Chloridwiderstandes von Beton - Einseitig gerichtete Diffusion; Deutsche und Englische Fassung prEN 12390-11:2025 | |
| Pruefung von Festbeton - Teil 13: Bestimmung des Elastizitaetsmoduls unter Druckbelastung (Sekantenmodul); Deutsche Fassung EN 12390-13:2013 | |
| Pruefung von Festbeton - Teil 16: Bestimmung des Schwindens von Beton; Deutsche Fassung EN 12390-16:2019 | |
| Pruefung von Festbeton - Teil 17: Bestimmung des Kriechens von Beton unter Druckspannung; Deutsche Fassung EN 12390-17:2019 | |
| Pruefung von Festbeton - Teil 18: Bestimmung des Chloridmigrationskoe ffizienten; Deutsche Fassung EN 12390-18:2021 | |
| Pruefung von Festbeton - Teil 19: Bestimmung des elektrischen Widerstands; Deutsche Fassung EN 12390-19:2023 | |
| Pruefung von Festbeton - Teil 1: Form, Masse und andere Anforderungen fuer Probekoerper und Formen; Deutsche Fassung EN 12390-1:2000, Berichtigungen zu DIN EN 12390-1:2001-02; Deutsche Fassung EN 12390-1:2000/AC:2004 | |
| Pruefung von Festbeton - Teil 4: Bestimmung der Druckfestigkeit - Anforderungen an Pruefmaschinen; Deutsche und Englische Fassung prEN 12390-4:2023 | |
| Pruefung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekoerpern; Deutsche Fassung EN 12390-6:2009 | |
| Pruefung von Frischbeton - Teil 10: Selbstverdichtender Beton - L-Kasten-Versuch; Deutsche Fassung EN 12350-10:2010 | |
| Pruefung von Frischbeton - Teil 11: Selbstverdichtender Beton - Bestimmung der Sedimentationsstabil itaet im Siebversuch; Deutsche Fassung EN 12350-11:2010 | |
| Pruefung von Frischbeton - Teil 2: Setzmass; Deutsche Fassung EN 12350-2:2009 | |
| Pruefung von Frischbeton - Teil 4: Verdichtungsmass; Deutsche Fassung EN 12350-4:2009 | |
| Pruefung von Frischbeton - Teil 5: Ausbreitmass; Deutsche Fassung EN 12350-5:2009 | |
| Pruefung von Frischbeton - Teil 6: Frischbetonrohdichte ; Deutsche Fassung EN 12350-6:2009 | |
| Pruefung von Frischbeton - Teil 7: Luftgehalt - Druckverfahren; Deutsche Fassung EN 12350-7:2009 | |
| Pruefung von Frischbeton - Teil 8: Selbstverdichtender Beton - Setzfliessversuch; Deutsche Fassung EN 12350-8:2010 | |
| Pruefung von Frischbeton - Teil 9: Selbstverdichtender Beton - Auslauftrichterversu ch; Deutsche Fassung EN 12350-9:2010 | |
| Pruefverfahren fuer Naturstein - Bestimmung des Widerstandes gegen Kristallisation von Salzen; Deutsche Fassung EN 12370:1999 | |
| Quality classification of timber used in pallets and packaging | |
| Railway applications - Ride comfort for passengers - Measurement and evaluation | |
| Rauch- und Waermefreihaltung - Teil 9: Steuerungstafeln; Deutsche Fassung prEN 12101-9:2004 | |
| Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking | |
| Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests | |
| Refrigerating systems and heat pumps - Valves - Requirements, testing and marking | |
| Resilient floor coverings - Agglomerated cork underlays - Specification | |
| Resilient floor coverings - Cork floor tiles - Specification; English version of DIN EN 12104 | |
| Resilient floor coverings - Determination of moisture content of agglomerated composition cork | |
| Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings | |
| Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions | |
| Rotodynamic pumps - Technical documents - Terms, delivery range, layout | |
| Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification | |
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering | |
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing | |
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method | |
| Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel ball method | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure (includes Amendment A1:2008) | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening (includes Amendment A1:2008) | |
| Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009) | |
| Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains Corrigendum 1 to English version of DIN EN 1218-2:2004-11... | |
| Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains | |
| Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) Corrigendum 1 to English version of DIN EN 1218-4:2004-12 | |
| Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) | |
| Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain Corrigendum 1 to English version of... | |
| Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain | |
| Safety requirements for bonded abrasive products | |
| Safety requirements for cableway installations designed to carry persons - Operation | |
| Safety requirements for cableway installations designed to carry persons - Quality control | |
| Sawn timber used in industrial packaging - Permitted deviations and preferential sizes | |
| Sawn timber used in pallets - Permitted deviations and guidelines for dimensions | |
| Shutters, external and internal blinds - Misuse - Test methods; English version of DIN EN 12194 | |
| Sicherheit von Holzbearbeitungsmasc hinen - Zapfenschneid- und Schlitzmaschinen - Teil 3: Abbundmaschinen mit von Hand bewegtem Schiebetisch; Deutsche Fassung EN 1218-3:2001+A1:2009 | |
| Sicherheit von Maschinen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 1: Allgemeine Leitsaetze; Deutsche Fassung EN 12198-1:2000+A1:2008 | |
| Sicherheit von Werkzeugmaschinen - Kleine numerisch gesteuerte Drehmaschinen und Drehzentren (enthaelt Aenderung A1:2002); Deutsche Fassung EN 12415:2000 + A1:2002 | |
| Sisal-Bindegarne; Deutsche Fassung EN 12422:1999 | |
| Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods; German and English version prEN 12326-2:2024 | |
| Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification | |
| Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test | |
| Slurry surfacing - Part 7: Shaking abrasion test | |
| Slurry surfacing - Requirements | |
| Slurry surfacing - Test method - Part 3: Consistency; English version of DIN EN 12274-3 | |
| Slurry surfacing - Test method - Part 5: Determination of wearing | |
| Slurry surfacing - Test methods - Part 1: Sampling for binder extraction; English version of DIN EN 12274-1 | |
| Slurry surfacing - Test methods - Part 2: Determination of residual binder content | |
| Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix | |
| Slurry surfacing - Test methods - Part 6: Rate of application; English of DIN EN 12274-6 | |
| Slurry surfacing - Test methods - Part 8: Visual assessment of defects | |
| Smoke and heat control systems - Part 8: Smoke control dampers | |
| Stahldrahtseile - Sicherheit - Teil 2: Begriffe, Bezeichnung und Klassifizierung; Deutsche Fassung EN 12385-2:2002+A1:2008 | |
| Stahldrahtseile - Sicherheit - Teil 2: Begriffe, Bezeichnung und Klassifizierung; Deutsche Fassung EN 12385-2:2002+A1:2008 , Berichtigung zu DIN EN 12385-2:2008-06 | |
| Standard atmospheres for conditioning and testing of footwear and components for footwear | |
| Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications (includes Amendment A1:2008) | |
| Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications; Corrigendum 1 to English version of DIN EN 12385-10:2008-07 | |
| Steel wire ropes - Safety - Part 3: Information for use and maintenance (includes Amendment A1:2008) | |
| Steel wire ropes - Safety - Part 3: Information for use and maintenance; Corrigendum 1 to English version of DIN EN 12385-3:2008-06 | |
| Steel wire ropes - Safety - Part 5: Stranded ropes for liftings | |
| Steel wire ropes - Safety - Part 5: Stranded ropes for lifts; Corrigenda to DIN EN 12385-5:2003-03 | |
| Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts | |
| Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts | |
| Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons | |
| Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons | |
| Steril rectal catheters for single use | |
| Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC | |
| Surface dressing - Requirements | |
| Surface dressing - Test methods - Part 2: Visual assessment of defects | |
| Surfaces for sports areas - Determination of ball roll behaviour | |
| Surfaces for sports areas - Determination of joint strength of synthetic surfaces | |
| Surfaces for sports areas - Determination of sward height of natural turf | |
| Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces | |
| Surfaces for sports areas - Determination of thatch depth of natural turf | |
| Surfaces for sports areas - Determination of vertical ball behaviour; Corrigendum 1 to English version of DIN EN 12235:2004-09 | |
| Surfaces for sports areas - Determination of vertical ball behaviour | |
| Surfaces for sports areas - Method of test - Determination of ground cover of natural turf | |
| Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces | |
| Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements | |
| Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements | |
| Technical aids for disabled persons - General requirements and test methods | |
| Test sieving of solid fertilizers (ISO 8397:1988, modified) | |
| Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test | |
| Testing fresh concrete - Part 13: Bleeding test - Static and pressure; German and English version prEN 12350-13:2025 | |
| Testing fresh concrete - Part 1: Sampling | |
| Testing fresh concrete - Part 3: Vebe test | |
| Testing hardened concrete - Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method | |
| Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process | |
| Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process | |
| Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; English version of DIN EN 12390-1 | |
| Testing hardened concrete - Part 20: Determination of porosity; German and English version prEN 12390-20:2025 | |
| Testing hardened concrete - Part 2: Making and curing specimens for strength tests; Amendment A20 | |
| Testing hardened concrete - Part 2: Making and curing specimens for strength tests; Corrigendum to DIN EN 12390-2:2009-08 | |
| Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German Version EN 12390-2:2009 | |
| Testing hardened concrete - Part 3: Compressive strength of test specimens; Corrigendum to DIN EN 12390-3:2009-07 | |
| Testing hardened concrete - Part 3: Compressive strength of test specimens | |
| Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; English version of DIN EN 12390-4 | |
| Testing hardened concrete - Part 5: Flexural strength of test specimens | |
| Testing hardened concrete - Part 7: Density of hardened concrete | |
| Testing hardened concrete - Part 8: Depth of penetration of water under pressure | |
| Testing of hardened concrete - Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method; German and English version prEN 12390-12:2025 | |
| Textile fabrics - Determination of mass per unit area using small samples | |
| Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions | |
| Thermal insulating products for building applications - Determination of behaviour under point load | |
| Thermal insulating products for building applications - Determination of thickness for floating floor insulating products | |
| Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method; English version of DIN EN 12114 | |
| Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames | |
| Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes | |
| Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings | |
| Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling | |
| Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling | |
| Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning | |
| Touch and close fasteners - Determination of peel strength | |
| Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure | |
| Touch and close fasteners - Method for closure prior to washing and drying or dry cleaning | |
| Traffic control equipment - Signal heads | |
| Transportable gas cylinders - Non refillable metallic gas cylinders; English version of DIN EN 12205 | |
| Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders | |
| Tunnelling machines - Air locks - Safety requirements (includes Amendment A1:2008) | |
| Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements (includes Amendment A1:2009) | |
| Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements (includes Amendment A1:2008) | |
| Turngeraete - Pferde und Boecke - Funktionelle und sicherheitstechnisch e Anforderungen, Pruefverfahren; Deutsche Fassung EN 12196:2003 | |
| Underground mining machinery - Specification for the safety requirements of armoured face conveyors (includes Amendment A1:2009) | |
| Unterdruckentwaesser ungssysteme innerhalb von Gebaeuden; Deutsche Fassung EN 12109:1999 | |
| Vehicle parking control equipment - Pay and display ticket machines - Technical and functional requirements; English version of DIN EN 12414 | |
| Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications; English version of DIN EN 12239 | |
| Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; English version of DIN EN 12238 | |
| Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation | |
| Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts | |
| Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; English version of DIN EN 12236 | |
| Vorhangfassaden - Luftdurchlaessigkeit - Leistungsanforderung en und Klassifizierung; Deutsche Fassung EN 12152:2002 | |
| Vorhangfassaden - Luftdurchlaessigkeit - Pruefverfahren; Deutsche Fassung EN 12153:2000 | |
| Waermeaustauscher - Luftkuehler und Lufterhitzer fuer erzwungene Konvektion - Pruefverfahren zur Leistungsfeststellun g (enthaelt Aenderung A1:2002); Deutsche Fassung EN 1216:1998 + A1:2002 | |
| Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release | |
| Wastewater treatment plants - Part 10: Safety principles; English version of DIN EN 12255-10 | |
| Wastewater treatment plants - Part 11: General data required; English version of DIN EN 12255-11 | |
| Wastewater treatment plants - Part 12: Control and automation | |
| Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/floccu lation | |
| Wastewater treatment plants - Part 14: Disinfection | |
| Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants | |
| Wastewater treatment plants - Part 16: Physical (mechanical) filtration | |
| Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); English version of DIN EN 12255-3:2000 + AC:2000 | |
| Wastewater treatment plants - Part 4: Primary settlement; English version of DIN EN 12255-4 | |
| Wastewater treatment plants - Part 5: Lagooning processes | |
| Wastewater treatment plants - Part 6: Activated sludge process; English version of DIN EN 12255-6 | |
| Wastewater treatment plants - Part 7: Biological fixed-film reactors; English version of DIN EN 12255-7 | |
| Wastewater treatment plants - Part 8: Sludge treatment and storage; English version of DIN EN 12255-8 | |
| Wastewater treatment plants - Part 9: Odour control and ventilation; English version of DIN EN 12255-9 | |
| Water quality - Determination of mercury - Enrichment methods by amalgamation | |
| Water quality - Determination of nitrogen - Determination of bound nitrogen (TN b ), following oxidation to nitrogen oxides | |
| Werksgefertigte Tanks aus Stahl - Teil 1: Liegende zylindrische ein- und doppelwandige Tanks zur unterirdischen Lagerung von brennbaren und nichtbrennbaren wassergefaehrdenden Fluessigkeiten; Deutsche Fassung EN 12285-1:2003 | |
| Werkzeugmaschinen - Sicherheit - Bearbeitungszentren; Deutsche Fassung EN 12417:2001+A2:2009 | |
| Wickeleinrichtungen fuer den Hausgebrauch - Teil 1: Sicherheitstechnisch e Anforderungen; Deutsche Fassung EN 12221-1:2008 | |
| Wickeleinrichtungen fuer den Hausgebrauch - Teil 2: Pruefverfahren; Deutsche Fassung EN 12221-2:2008, Berichtigung zu DIN EN 12221-2:2008-08 | |
| Windows and doors - Air permeability - Classification; English version of DIN EN 12207 | |
| Windows and doors - Resistance to wind load - Test method; English version of DIN EN 12211 | |
| Windows and doors - Watertightness - Classification; English version of DIN EN 12208 | |
| Windows and pedestrian doors - Mechanical durability - Requirements and classification | |
| Wood-based panels - Characteristic values for structural design - Part 2: Plywood; German and English version prEN 12369-2:2024 | |
| Wood-based panels - Characteristic values for structural design - Part 2: Plywood | |
| Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods | |
| Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods; German version EN 1231:1996 | |
| Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids | |
| Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling... |
| << Prev | Next >> |