Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
260
270
280
290
300
310
312
313
314
315
316
317
318
319
320
321
322
323
324
330
340
350
360
370
380
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Determination of Viscosity | |
| Adhesives for ceramic tiles Part 1: Requirements, assessment and verification of constancy of performance, classification and marking | |
| Adhesives for ceramic tiles Part 2: Test methods | |
| Adhesives for tiles - Definitions and specifications | |
| Adhesives for Tiles - Determination of Shear Adhesion Strength of Reaction Resin Adhesives | |
| Adhesives for Tiles - Determination of Transverse Deformation for Cementitious Adhesives and Grouts | |
| Adhesives for tiles - Requirements, evaluation of conformity, classification and designation | |
| Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion | |
| Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity | |
| Advanced technical ceramics Ceramic composites, thermophysical properties Part 3: Determination of specific heat capacity | |
| Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airbone noise - Determination of the sound power level... | |
| Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level Part 1: Air conditioners, liquid chilling packages, heat... | |
| Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors \x96 Determination of the sound power level Part 2: Heat pump water heaters | |
| Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 1: Technical Conditions for Inspection and Delivery | |
| Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on Dimensions and Form | |
| Biotechnology - Laboratories for Research, Development and Analysis - Containment Levels of Microbiology Laboratories, Areas of Risk, Localities and Physical Safety Requirements | |
| Biotechnology - Large Scale Process and Production - Procedures for Fermentation and Downstream Processes | |
| Blood-Gas Exchangers | |
| Builders Hoists for Goods - Part 1: Hoists with Accessible Platforms | |
| Builders Hoists for Goods - Part 2: Inclined Hoists with Non-Accessible Load Carrying Devices | |
| Builders Hoists for Persons and Materials with Vertically Guided Cages | |
| Builders' hoists for goods - Part 1: Hoists with accessible platforms | |
| Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices | |
| Building Hardware - Door and Window Bolts - Requirements and Test Methods | |
| Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods | |
| Building hardware Controlled door closing devices Requirements and test methods | |
| Building hardware Door coordinator devices Requirements and test methods | |
| Building Valves - Copper Alloy Stopvalves for Potable Water Supply in Buildings - Tests and Requirements | |
| Cathodic Protection - External Organic Coatings for the Corrosion Protection of Buried or Immersed Steel Pipelines Used in Conjunction with Cathodic Protection - Tapes and Shrinkable Materials | |
| Characterization of Sludge - Determination of pH Value | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Ammonia Solution | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Ammonium Sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Dipotassium Hydrogen Orthophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Disodium Hydrogen Orthophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Hexafluorosilicic Acid | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Liquefied Ammonia | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Monocalcium Phosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Monopotassium Dihydrogen Orthophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Monozinc Phosphate Solution | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Potassium Tripolyphosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Acid Pyrophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Calcium Polyphosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Dihydrogen Orthophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Disulfite | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Fluoride | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hexafluorosilicate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hydrogen Sulfite | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Polyphosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Silicate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Sulfite | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Thiosulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Tripolyphosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Tetrapotassium Pyrophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Tetrasodium Pyrophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Tripotassium Orthophosphate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Trisodium Orthophosphate | |
| Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating system | |
| Controls for Heating Systems - Part 2: Optimum Start-Stop Control Equipment for Hot Water Heating Systems | |
| Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems | |
| Controls for heating systems - Part 4: Optimum start-stop control equipment for electrical systems | |
| Controls for heating systems - Part 5: Start-stop schedulers for heating systems | |
| Conveying, spraying and placing machines for concrete and mortar - Safety requirements | |
| Conveying, spraying and placing machines for concrete and mortar Safety requirements | |
| Copper and Copper Alloys - Hollow Rod for Free Machining Purposes | |
| Copper and Copper Alloys - Material Condition or Temper Designation | |
| Copper and Copper Alloys - Profiles and Rectangular Bar for General Purposes | |
| Copper and Copper Alloys - Rod for Free Machining Purposes | |
| Copper and Copper Alloys - Rod for General Purposes | |
| Copper and Copper Alloys - Sheet snd Strip for Building Purposes | |
| Copper and Copper Alloys - Wire for General Purposes | |
| Copper and Copper Alloys - Wrought and Unwrought Forging Stock | |
| Cranes Safety - Requirements for Health and Safety - Part 2: Limiting and Indicating Devices | |
| Curtain Walling - Air Permeability - Test Method | |
| Curtain Walling - Resistance to Wind Load - Test Method | |
| Curtain Walling - Watertightness - Laboratory Test Under Static Pressure | |
| Curtain Walling - Watertightness - Performance Requirements and Classification | |
| Curtin Walling - Air Permeability - Performance Requirements and Classification | |
| Domestic and Non-Domestic Gas-Fired Air Heaters - Supplementary Requirements for Condensing Air Heaters | |
| Doors - Classification of Strength Requirements | |
| Electrically Powered Wheelchairs, Scooters and Their Chargers - Requirements and Test Methods | |
| Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | |
| Electromagnetic Compatibility - Product Family Standard for Lifts, Escalators and Passenger Conveyors - Emission | |
| Electromagnetic Compatibilty - Product Family Standard for Lifts, Escalators and Passenger Conveyors - Immunity | |
| Execution of Special Geotechnical Work - Sheet Pile Walls | |
| Feather and Down - Method of Test for Measuring the Sizes of Quilts Filled with Feather and/or Down | |
| Feather and Down - Methods of Testing the Down-Proof Properties of Fabrics - Part 1: Rubbing Test | |
| Feather and Down - Methods of Testing the Down-Proof Properties of Fabrics - Part 2: Impact Test | |
| Feather and Down - Test Methods - Determination of Moisture Content | |
| Feather and Down - Test Methods - Determination of the Filling Power (Massic Volume) | |
| Feather and Down - Test Methods - Determination of the Oil and Fat Content | |
| Feather and Down - Test Methods - Determination of the Oxygen Index Number | |
| Feather and Down - Test Methods - Determination of the Quantitive Composition of Feather and Down (Manual Method) | |
| Feather and Down - Test Methods - Determination of the Turbidity of an Aqueous Extract | |
| Feather and Down - Test Methods - Determination of Water-Soluble Chlorides | |
| Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 13: Requirements and Test Methods for Check Valves and Non-Return Valves | |
| Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 5: Requirements and Test Methods for High and Low Pressure Selector Valves and Their Actuators for CO2 Systems | |
| Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 6: Requirements and Test Methods for Non-Electrical Disable Devices for CO2 Systems | |
| Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 7: Requirements and Test Methods for Nozzles for CO2 Systems | |
| Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 8: Requirements and Test Methods for Flexible Connectors for CO2 Systems | |
| Fixed firefighting systems \x97 Components for gas extinguishing systems \x97 Part 4: Requirements and test methods for container valve assemblies and their actuators | |
| Fixed firefighting systems Components for gas extinguishing systems Part 10: Requirements and test methods for pressure gauges and pressure switches | |
| Fixed firefighting systems Components for gas extinguishing systems Part 11: Requirements and test methods for mechanical weighing devices | |
| Fixed firefighting systems Components for gas extinguishing systems Part 12: Requirements and test methods for pneumatic alarm devices | |
| Fixed firefighting systems Components for gas extinguishing systems Part 16: Requirements and test methods for odorizing devices for CO2 low | |
| Fixed firefighting systems Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices | |
| Fixed firefighting systems Components for gas extinguishing systems Part 2: Requirements and test methods for non-electrical automatic control and delay devices | |
| Fixed firefighting systems Components for gas extinguishing systems Part 3: Requirements and test methods for manual triggering and stop devices | |
| Fixed firefighting systems Components for gas extinguishing systems Part 9: Requirements and test methods for special fire detectors | |
| Flexible Sheets for Waterproofing - Bitumen Sheets for Roofs Waterproofing - Determination of Adhesion of Granules | |
| Food processing machinery - Automatic dividers - Safety and hygiene requirements | |
| Food Processing Machinery - Intermediate Provers - Safety and Hygiene Requirements | |
| Food Processing Machinery - Moulders - Safety and Hygiene Requirements | |
| Food processing machinery Automatic dividers Safety and hygiene requirements | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 4: Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products | |
| Foodstuffs - Determination of Nitrate and/or Nitrite Content - Part 7: Continuous Flow Method for the Determination of Nitrate Content of Vegetables and Vegetable Products After Cadmium Reduction | |
| Foodstuffs - Determination of Nitrate and/or Nitrite Content Part 1: General Considerations | |
| Foodstuffs - Determination of Nitrate and/or Nitrite Content Part 2: HPLC/IC Method for the Determination of Nitrate Content of Vegetables and Vegetable Products | |
| Foodstuffs - Determination of Nitrate and/or Nitrite Content Part 5: Enzymatic Determination of Nitrate Content of Vegetable-Containing Food for Babies and Infants | |
| Foodstuffs Determination of nitrate and/or nitrite content Part 3: Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite | |
| Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements | |
| Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements | |
| Footwear, leather and imitation leather goods manufacturing machines Shoe and leather presses Safety requirements | |
| Fruit and Vegetable Juices - Determination of Centrifugable Pulp Content | |
| Fruit and Vegetable Juices - Determination of Chloride Content - Potentiometric Titration Method | |
| Fruit and Vegetable Juices - Determination of Hesperidin and Naringin in Citrus Juices - Method Using High Performance Liquid Chromatography | |
| Fruit and Vegetable Juices - Determination of Nitrogen Content - Kjeldahl Method | |
| Fruit and Vegetable Juices - Determination of Tartaric Acid in Grape Juices - Method by High Performance Liquid Chromatography | |
| Fruit and Vegetable Juices - Determination of Total Alkalinity of Ash - Titrimetric Method | |
| Fruit and Vegetable Juices - Determination of Total Carotenoid Content and Individual Carotenoid Fractions | |
| Fruit and Vegetable Juices - Determination of Total Dry Matter - Gravimetric Method with Loss of Mass on Drying | |
| Fruit and Vegetable Juices - Enzymatic Determination of D-malic Acid Content NAD Spectrometric Method | |
| Fruit and Vegetable Juices - Enzymatic Determination of Sucrose Content NADP Spectrometric Method | |
| Fruit and Vegetable Juices - Estimation of Soluble Solids Content - Refractometric Method | |
| Gas infrastructure \x97 Pipelines for maximum operating pressure up to and including 16 bar Part 5: Service lines \x97 Specific functional requirements | |
| Gas Supply Systems - Gas Pressure Regulating Stations for Transmission and Distribution - Functional Requirements | |
| Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 1: General Functional Recommendations | |
| Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 2: Specific Functional Recommendations for Polyethylene (MOP up to and Including 10 Bar)... | |
| Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 3: Specific Functional Recommendations for Steel | |
| Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 4: Specific Functional Recommendations for Renovation | |
| Gas/Air Ratio Controls for Gas Burners and Gas Burning Appliances - Part 1: Pneumatic Types | |
| Gas/air ratio controls for gas burners and gas burning appliances Part 2: Electronic types | |
| Generic Specification: Electromechanical All-or-Nothing Relays Part 2: Generic Data and Methods of Test for Time Delay Relays | |
| Glass in Building - Thermally Toughened Soda Lime Silicate Safety Glass - Part 1: Definition and Description | |
| Glass in Building - Thermally Toughened Soda Lime Silicate Safety Glass Part 1: Definition and Description | |
| Glass in building Thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/Product standard | |
| Gravity Drainage Systems Inside Buildings - Part 1: General and Performance Requirements | |
| Gravity Drainage Systems Inside Buildings - Part 2: Sanitary Pipework, Layout and Calculation | |
| Gravity Drainage Systems Inside Buildings - Part 3: Roof Drainage, Layout and Calculation | |
| Gravity Drainage Systems Inside Buildings - Part 4: Wastewater Lifting Plants - Layout and Calculation | |
| Gravity Drainage Systems Inside Buildings - Part 5: Installation and Testing, Instructions for Operation, Maintenance and Use | |
| Gymnastics Equipment - Horizontal Bars - Safety Requirements and Test Methods | |
| Gymnastics Equipment - Horses and Bucks - Functional and Safety Requirements, Test Methods | |
| Harmonized system of quality assessment for electronic components - Blank detail specification - Electromechanical all-or-nothing TELECOM relays of assessed quality | |
| Harmonized System of Quality Assessment for Electronic Components - Blank Detail Specification: Hermetically Sealed Relays - for Severe Static Environmental Conditions (116205) for Severe Mobile Environmental Conditions (116206) for Severe... | |
| Harmonized system of quality assessment for electronic components - Generic specification - Dry and mercury wetted reed contact units | |
| Harmonized System of Quality Assessment for Electronic Components - Generic Specification: Semiconductor Optoelectronic and Liquid Crystal Devices | |
| Harmonized system of quality assessment for electronic components - Generic specification: Solid state all-or-nothing relays of assessed quality. Generic data and methods of test | |
| Harmonized System of Quality Assessment for Electronic Components - Sectional Specification: Electromechanical All-or-Nothing Relays (Including Relays for Severe Environmental Conditions) | |
| Harmonized system of quality assessment for electronic components Blank detail specification - Electromechanical all-or-nothing TELECOM relays of assessed quality, dual-in-line, with 14 mm\xd7 9 mm base | |
| Harmonized system of quality assessment for electronic components Blank detail specification Electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5A to 25A) | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification Electromechanical All-or-Nothing TELECOM Relays of Assessed Quality, Dual-In-Line, w/ 15mm x 7,5mm Base, 2 Change-Over Contacts | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification Radio Frequency Coaxial Connectors | |
| Harmonized system of quality assessment for electronic components Generic specification: Electromechanical all-or-nothing relays - Part 1: General | |
| Harmonized System of Quality Assessment for Electronic Components Generic Specification: Electromechanical All-or-Nothing Relays Part 3: Test and Measurement Procedures | |
| Health informatics - Digital imaging - Communication, workflow and data management | |
| Heat Exchangers - Forced Circulation Air-Cooling and Air-Heating Coils - Test Procedures for Establishing the Performance | |
| Heat Exchangers - Water-to-Water Heat Exchangers for District Heating - Test Procedure for Establishing the Performance Data | |
| Heating systems in buildings \x97 Procedure for the preparation of documents for operation, maintenance and use \x97 Heating systems not requiring a trained operator | |
| Heating systems in buildings \x97 Procedure for the preparation of documents for operation, maintenance and use \x97 Heating systems requiring a trained operator | |
| Impact Absorbing Playground Surfacing - Safety Requirements and Test Methods | |
| Impact attenuating playground surfacing - Methods of test for determination of impact attenuation | |
| Industrial valves Cast iron gate valves | |
| Installations and Equipment for Liquefied Natural Gas - Testing of Foam Concentrates Designed for Generation of Medium and High Expansion Foam and of Extinguishing Powders Used on Liquefied Natural Gas... | |
| Installations and Equipment for Liquefied Natural Gas - Testing of Insulating Linings for Liquefied Natural Gas Impounding Areas | |
| Installions and Equipment for Liquefied Natural Gas - General Characteristics of Liquefied Natural Gas | |
| Instrumentation to be Used in Association with Non-Active Surgical Implants - General Requirements | |
| Light and Lighting - Sports Lighting | |
| Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements | |
| Liquid Pumps - Safety Requirements - Procedure for Hydrostatic Testing | |
| Load Restraint Assemblies on Road Vehicles - Safety - Part 2: Web Lashing Made from Man-Made Fibres | |
| Load Restraint Assemblies on Road Vehicles - Safety - Part 3: Lashing Chains | |
| Load restraint assemblies on road vehicles \x97 Safety \x97 Part 4: Lashing steel wire ropes | |
| Load restraint assemblies on road vehicles Safety Part 1: Calculation of lashing forces | |
| Machinery and plants for the preparation of concrete and mortar \x97 Safety requirements | |
| Manually Propelled Wheelchairs - Requirements and Test Methods | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 12: Test Methods for Overall Migration at Low Temperatures | |
| Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 1: Guide to the Selection of Conditions and Test Methods for Overall Migration | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 2: Test Methods for Overall Migration into Olive Oil by Total Immersion | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 3: Test Methods for Overall Migration into Aqueous Food Simulants by Total Immersion | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 4: Test Methods for Overall Migration into Olive Oil by Cell | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 5: Test Methods for Overall Migration into Aqueous Food Simulants by Cell | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 6: Test Methods for Overall Migration into Olive Oil Using a Pouch | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 7: Test Methods for Overall Migration into Aqueous Food Simulants Using a Pouch | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 8: Test Methods for Overall Migration into Olive Oil by Article Filling | |
| Materials and Articles in Contact with Foodstuffs - Plastics - Part 9: Test Methods for Overall Migration into Aqueous Food Simulants by Article Filling | |
| Materials and articles in contact with foodstuffs - Plastics Part 14: Test methods for \x91substitute tests\x92 for overall migration from plastics intended to come into contact with fatty foodstuffs using... | |
| Materials and Articles in Contact with Foodstuffs - Test Methods for Thermal Shock and Thermal Shock Endurance | |
| Materials and Articles in Contact with Foodstuffs - Test Methods for Translucency of Ceramic Articles | |
| Materials and Articles in Contact with Foodstuffs - Test Methods for Water Absorption of Ceramic Articles | |
| Materials and articles in contact with foodstuffs Plastics Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil... | |
| Materials and articles in contact with foodstuffs Plastics Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides | |
| Materials and articles in contact with foodstuffs Plastics Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95% ethanol | |
| Mechanical Vibration - Declaration and Verification of Vibration Emission Values | |
| Method for Determination of Titratable Acidity of Fruit and Vegetable Juices | |
| Methods of test for petroleum and its products BS 2000-425: Liquid petroleum products Unleaded petroleum Determination of benzene content by gas chromatography | |
| Methods of Test for Petroleum and Its Products Part 309: Diesel and Domestic Heating Fuels - Determination of Cold Filter Plugging Point | |
| Methods of Test for Petroleum and its Products Part 402: Petroleum Products - Determination of Reid Vapour Pressure - Wet Method | |
| Natural stone products - Dimensional stone work - Requirements | |
| Natural stone products Modular tiles Requirements | |
| Natural stone products Slabs for floors and stairs Requirements | |
| Non-Active Surgical Implants - Body Contouring Implants - Specific Requirements for Mammary Implants | |
| Non-active surgical implants - Joint replacement implants - Particular requirements | |
| Non-Active Surgical Implants - Particular Requirements for Cardiac and Vascular Implants - Part 1: Heart Valve Substitutes | |
| Non-Active Surgical Implants - Particular Requirements for Cardiac and Vascular Implants - Part 2: Vascular Prostheses Including Cardiac Valve Conduits | |
| Non-Active Surgical Implants - Particular Requirements for Cardiac and Vascular Implants - Part 3: Endovascular Devices | |
| Non-Destructive Examination of Welds - General Rules for Metallic Materials | |
| Non-Destructive Testing - Eddy Current Testing - General Principles and Guidelines | |
| Offshore Containers - Design, Construction, Testing, Inspection and Marking | |
| Offshore containers and associated lifting sets Part 1: Offshore containers Design, manufacture and marking | |
| Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking | |
| Offshore containers and associated lifting sets Part 3: Periodic inspection, examination and testing | |
| Operating Forces - Test Method - Part 2: Doors | |
| Operating forces Test method Part 1: Windows | |
| Oropharyngeal Airways | |
| Plastic piping systems for water supply - Polyethylene (PE) - Part 4: Valves | |
| Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators | |
| Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators | |
| Plastics and rubber machines Size reduction machines Part 4: Safety requirements for agglomerators | |
| Plastics Piping Systems - Brackets for Rainwater Piping Systems - Test Method for Bracket Strength | |
| Plastics Piping Systems - Determination of Moisture Content in Thermoplastics by Coulometry | |
| Plastics Piping Systems - Fittings, Valves and Ancillaries - Determination of Gaseous Flow Rate/Pressure Drop Relationships | |
| Plastics Piping Systems - Injection-Moulded Thermoplastics Fittings, Valves and Ancillary Equipment - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials for Injection Moulding of Piping Components | |
| Plastics Piping Systems - Polyethylene (PE) Pipes - Test Method for the Resistance to Internal Pressure After Application of Squeeze-Off | |
| Plastics Piping Systems - Polyethylene (PE) Valves - Test Method for Resistance to Bending between Supports | |
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling | |
| Plastics Piping Systems - Polyethylene Piping Materials and Components - Determination of Volatile Content | |
| Plastics Piping Systems - Thermoplastics Fittings - Test Method for Impact Resistance | |
| Plastics piping systems for water supply Polyethylene (PE) Part 1: General | |
| Plastics piping systems for water supply Polyethylene (PE) Part 2: Pipes | |
| Plastics piping systems for water supply Polyethylene (PE) Part 3: Fittings | |
| Plastics piping systems for water supply Polyethylene (PE) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) Part 13: Fittings | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) Part 2: Pipes | |
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system | |
| Playground Equipment - Part 1: Guidance Safety Requirements and Test Methods | |
| Playground Equipment - Part 2: Additional Specific Safety Requirements and Test Methods for Swings | |
| Playground Equipment - Part 3: Additional Specific Safety Requirements and Test Methods for Slides | |
| Playground Equipment - Part 4: Additional Specific Safety Requirements and Test Methods for Runways | |
| Playground Equipment - Part 5: Additional Specific Safety Requirements and Test Methods for Carousels | |
| Playground Equipment - Part 6: Additional Specific Safety Requirements and Test Methods for Rocking Equipment | |
| Playground Equipment - Part 7: Guidance on Installation, Inspection, Maintenance and Operation | |
| Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment | |
| Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network | |
| Playground equipment and surfacing Part 1: General safety requirements and test methods | |
| Portable Ladders for Fire Service Use | |
| Precast Concrete Products - General Rules for Factory Production Control of Glass-Fibre Reinforced Cement | |
| Precast concrete products - Hollow core slabs | |
| Precast Concrete Products - Test Method for Glass Fibre Reinforced Cement Part 2: Measuring the Fibre Content in Fresh GRC,`Wash Out Test' | |
| Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 1: Measuring the Consistency of the Matrix - 'Slump Test' Method | |
| Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 3: Measuring the Fibre Content of Sprayed GRC | |
| Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 4: Measuring Bending Strength - 'Simplified Bending Test' Method | |
| Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 5: Measuring Bending Strength, 'Complete Bending Test' Method | |
| Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 6: Determination of the Absorption of Water by Immersion and Determination of the Dry Density | |
| Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 7: Measurement of Extremes of Dimensional Variations Due to Moisture Content | |
| Precast concrete products - Test methods for glassfibre reinforced concrete | |
| Precast concrete products Hollow core slabs | |
| Products and Systems for the Protection and Repair of Concrete Structures - Granulometry Analysis - Part 1: Test Method for Dry Components of Premixed Mortar | |
| Products and Systems for the Protection and Repair of Concrete Structures - Granulometry Analysis - Part 2: Test Method for Fillers for Polymer Bonding Agents | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Adhesion Steel-to-Steel for Characterization of Structural Bonding Agents | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Compressive Strength of Repair Mortar | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Open Time | |
| Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay | |
| Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements | |
| Protective Clothing - Electrostatic Properties Part 1: Surface Resistivity (Test Methods and Requirements) | |
| Protective Clothing - Electrostatic Properties Part 2: Test Method for Measurement of the Electrical Resistance Through a Material (Vertical Resistance) | |
| Protective Clothing - Visibility Clothing for Non-Professional Use - Test Methods and Requirements | |
| Pumps - Rotodynamic Pumps - Circulation Pumps Having an Electrical Effect Not Exceeding 200 W for Heating Installations and Domestic Hot Water Installations - Requirements, Testing, Marking | |
| Pumps Rotodynamic pumps Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Part 1: Non-automatic circulation pumps, requirements, testing, marking... | |
| Pumps Rotodynamic pumps Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Part 2: Noise test code (vibro-acoustics) for measuring... | |
| Railway applications - Axleboxes - Lubricating greases | |
| Railway applications - Axleboxes - Performance testing | |
| Railway applications - Axleboxes - Rolling bearings | |
| Railway applications. Axleboxes. Lubricating greases | |
| Railway applications. Axleboxes. Performance testing | |
| Railway applications. Axleboxes. Rolling bearings | |
| Refrigerating systems and heat pumps Liquid level indicating devices Requirements, testing and marking | |
| Residential liquid fuel burning appliances Part 2: Flued oil stoves with vaporizing burners | |
| Resilent Floor Coverings - Specifications for Homogeneous and Heterogeneous Relief Rubber Floor Coverings | |
| Resilient floor coverings - Agglomerated cork underlays - Specification | |
| Resilient Floor Coverings - Cork Floor Tiles - Specification | |
| Resilient Floor Coverings - Determination of Moisture Content of Agglomerated Composition Cork | |
| Respiratory Protective Devices - Compressed Air for Breathing Apparatus | |
| Respiratory Protective Devices - Filters with Breathing Hoses (Non-Mask Mounted Filters) - Particle Filters, Gas Filters, and Combined Filters - Requirements, Testing, Marking | |
| Rotodynamic Pumps - Coolant Pump Units for Machine Tools - Nominal Flow Rate, Dimensions | |
| Rubber and Plastics Machines - Internal Mixers - Safety Requirements | |
| Rubber and Plastics Machines - Size Reduction Machines - Part 1: Safety Requirements for Blade Granulators | |
| Rubber and Plastics Machines - Size Reduction Machines - Part 2: Safety Requirements for Strand Pelletisers | |
| Rubber and Plastics Machines - Size Reduction Machines - Part 3: Safety Requirements for Shredders | |
| Rubber and Thermoplastics Hoses and Hose Assemblies for Liquid or Gaseous Chemicals - Specification | |
| Safety of escalators and moving walks Part 1: Construction and installation | |
| Safety of escalators and moving walks Part 2: Rules for the improvement of safety of existing escalators and moving walks | |
| Safety of Industrial Trucks - Electrical Requirements - Part 1: General Requirements for Battery Powered Trucks | |
| Safety of Industrial Trucks - Electrical Requirements - Part 2: General Requirements for Internal Combustion Engine Powered Trucks | |
| Safety of Industrial Trucks - Electrical Requirements - Part 3: Specific Requirements for the Electric Power Transmission Systems of Internal Combustion Engine Powered Trucks | |
| Safety of Industrial Trucks - Test Methods for Measuring Noise Emissions | |
| Safety of industrial trucks \x96 Electrical/ electronic requirements | |
| Safety of Machinery - Assessment and Reduction of Risks Arising from Radiation Emitted by Machinery - Part 1: General Principles | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening | |
| Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part 2: Radiation emission measurement procedure | |
| Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part 3: Reduction of radiation by attenuation or screening | |
| Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers | |
| Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) | |
| Safety of Woodworking Machines - Tenoning Machines Part 1: Single End Tenoning Machines With Sliding Table | |
| Safety of woodworking machines \x97 Tenoning machines \x97 Part 2: Double end tenoning and/or profiling machines fed by chain or chains | |
| Safety of woodworking machines \x97 Tenoning machines \x97 Part 5: One side profiling machines with fixed table and feed rollers or fed by chain | |
| Safety of woodworking machines Tenoning machines Part 2: Double end tenoning and/or profiling machines fed by chain or chains | |
| Safety of woodworking machines Tenoning machines Part 4: Edge banding machines fed by chain(s) | |
| Safety of woodworking machines Tenoning machines Part 5: One side profiling machines with fixed table and feed rollers or fed by chain | |
| Safety Rules for the Construction and Installation of Escalators and Passenger Conveyors | |
| Sectional Specification: Electromechanical All-or-Nothing Heavy Load Relays of Assessed Quality (Rated from 5 A and Above) | |
| Sectional Specification: Electromechanical All-or-Nothing TELECOM Relays of Assessed Quality | |
| Self Adhesive Tapes - Determination of the Water-Soluble Corrosive Ions | |
| Self Adhesive Tapes - Measurement of Elongation under Static Load | |
| Self Adhesive Tapes - Measurement of Flame Resistance | |
| Self Adhesive Tapes - Measurement of Impact Resistance | |
| Self Adhesive Tapes - Measurement of Resistance to Elevated Temperature and Humidity | |
| Self Adhesive Tapes - Measurement of Tear Resistance by the Pendulum Method | |
| Self Adhesive Tapes - Measurement of the Unwinding Force at High Speed | |
| Self Adhesive Tapes - Measurement of Water Vapour Transmission in a Warm Humid Atmosphere | |
| Self-Adhesive Tapes - Flagging of Adhesive Tape | |
| Self-Adhesive Tapes - Measurement of Bonding of Thermosetting Adhesive Tapes After Curing | |
| Self-Adhesive Tapes - Measurement of Bonding of Thermosetting Adhesive Tapes During Curing | |
| Self-Adhesive Tapes - Measurement of Bursting Strength | |
| Self-Adhesive Tapes - Measurement of the Length of a Roll of Adhesive Tape | |
| Self-Adhesive Tapes - Solvent Penetration into Adhesive Masking Tapes | |
| Shutters and Blinds Power Operated - Safety in Use - Measurement of the Transmitted Force | |
| Shutters, External and Internal Blinds - Misuse - Test Methods | |
| Smoke and heat control systems - Part 10: Power supplies | |
| Smoke and heat control systems - Part 1: Specification for smoke barriers | |
| Smoke and Heat Control Systems - Part 3: Specification for Powered Smoke and Heat Exhaust Ventilators | |
| Smoke and heat control systems Part 13: Pressure differential systems (PDS) \x97 Design and calculation methods, installation, acceptance testing, routine testing and maintenance | |
| Smoke and heat control systems Part 1: Specification for smoke barriers | |
| Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators | |
| Smoke and heat control systems Part 6: Specification for pressure differential systems Kits | |
| Smoke and heat control systems Part 7: Smoke duct sections | |
| Smoke and heat control systems Part 8: Smoke control dampers | |
| Solid Fertilizers - Measurement of Static Angle of Repose | |
| Solid Fertilizers and Liming Materials - Determination of Moisture Content - Gravimetric Method by Drying at (105 \xb1 2) Degrees C | |
| Solid Fertilizers and Liming Materials - Determination of Moisture Content - Gravimetric Method by Drying under Reduced Pressure | |
| Specification for Harfmonized system of quality assessment for electronic components - Blank detail specification - Pin-photodiodes for fibre optic applications | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Ambient rated photocouplers with phototransistor output | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Infrared emitting diodes, infrared emitting diode arrays | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Light emitting diodes and infrared emitting diodes for fibre optic system or sub-system | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Light emitting diodes, light emitting diode arrays, light emitting diode displays without internal logic and... | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Liquid crystal displays Monochrome LCDs without electronic circuit | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Photodiodes, photodiode-arrays (not intended for fibre optic applications) | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Phototransistors, photodarlington transistors, phototransistor arrays | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Radio frequency connectors (Type MIL-C-39012) | |
| Starches and Derived Products - Determination of Sulfur Dioxide Content - Acidimetric Method | |
| Sterilization of Medical Devices - Estimation of the Population of Micro-Organisms on Product Part 1: Requirements | |
| Sterilization of Medical Devices - Estimation of the Population of Micro-Organisms on Product Part 2: Guidance | |
| Sterilization of Medical Devices - Estimation of the Population of Micro-Organisms on Product Part 3: Guide to the Methods for Validation of Microbiological Techniques | |
| Surface Active Agents - Determination of the Total Polyethylene Glycol Content of Non-Ionic Surface Active Agents (EO Adducts) by HPLC/GPC | |
| Technical Aids for Disabled Persons - General Requirements and Test Methods | |
| Test method for glass-fibre reinforced cement Part 8: Cyclic weathering type test | |
| Textiles - Fabrics - Determination of Mass per Unit Area Using Small Samples | |
| Thermal Insulating Products for Building Applications - Determination of Bending Behaviour | |
| Thermal Insulating Products for Building Applications - Determination of Freeze-Thaw Resistance | |
| Thermal Insulating Products for Building Applications - Determination of Linear Dimensions of Test Specimens | |
| Thermal Insulating Products for Building Applications - Determination of Long Term Water Absorption by Diffusion | |
| Thermal Insulating Products for Building Applications - Determination of Long Term Water Absorption by Immersion | |
| Thermal Insulating Products for Building Applications - Determination of Shear Behaviour | |
| Thermal Insulating Products for Building Applications - Determination of Water Vapour Transmission Properties | |
| Thermal Performance of Buildings - Air Permeability of Building Components and Building Elements - Laboratory Test Method | |
| Timber Structures - Glued Laminated Timber - Strength Classes and Determination of Characteristic Values | |
| Timber Structures - Structural Timber and Glued Laminated Timber - Determination of Shear Strength and Mechanical Properties Perpendicular to the Grain | |
| Timber Structures - Test Methods - Performance of Structural Floor Decking | |
| Tracked Changes (Redline) - Adhesives for ceramic tiles Part 1: Requirements, assessment and verification of constancy of performance, classification and marking | |
| Tracked Changes (Redline) - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level. - Part 1: Air... | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form | |
| Tracked Changes (Redline) - Builders hoists for persons and materials with vertically guided cages | |
| Tracked Changes (Redline) - Builders' hoists for goods - Part 1: Hoists with accessible platforms | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Ammonia solution | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Liquefied ammonia | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Sodium disulfite | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Ammonium sulfate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Sodium hexafluorosilicate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Sodium hydrogen sulfite | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Sodium sulfite | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Sodium thiosulfate | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Hollow rod for free machining purposes | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Profiles and bars for general purposes | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Rod for free machining purposes | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Rod for general purposes | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Wire for general purposes | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Wrought and unwrought forging stock | |
| Tracked Changes (Redline) - Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices | |
| Tracked Changes (Redline) - Curtain walling - Air permeability -Test method | |
| Tracked Changes (Redline) - Curtain walling \x97 Air permeability \x97 Performance requirements and classification | |
| Tracked Changes (Redline) - Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods | |
| Tracked Changes (Redline) - Energy performance of buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 | |
| Tracked Changes (Redline) - Energy Performance of Buildings - Controls for heating systems Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 | |
| Tracked Changes (Redline) - Execution of special geotechnical work - Sheet pile walls, combined pile walls, high modulus walls | |
| Tracked Changes (Redline) - Feather and down - Test methods - Determination of the fill power (massic volume) | |
| Tracked Changes (Redline) - Feather and down - Test methods - Determination of the quantitative composition of feather and down (manual method) | |
| Tracked Changes (Redline) - Foodstuffs - Determination of nitrate and/or nitrite content Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products | |
| Tracked Changes (Redline) - Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements | |
| Tracked Changes (Redline) - Gas infrastructure \x97 Pipelines for maximum operating pressure up to and including 16 bar Part 3: Specific functional requirements for steel | |
| Tracked Changes (Redline) - Glass in building - Thermally toughened soda lime silicate safety glass Part 1: Definition and description | |
| Tracked Changes (Redline) - Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods | |
| Tracked Changes (Redline) - Industrial valves \x97 Cast iron gate valves | |
| Tracked Changes (Redline) - Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography | |
| Tracked Changes (Redline) - Natural stone products - Modular tiles - Requirements | |
| Tracked Changes (Redline) - Natural stone products \x97 Slabs for floors and stairs \x97 Requirements | |
| Tracked Changes (Redline) - Operating forces - Test method - Part 2: Doors | |
| Tracked Changes (Redline) - Plastics and rubber machines - Internal mixers - Safety requirements | |
| Tracked Changes (Redline) - Plastics and rubber machines \x96 Size reduction machines Part 4: Safety requirements for agglomerators | |
| Tracked Changes (Redline) - Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports | |
| Tracked Changes (Redline) - Plastics piping systems \x97 Polyethylene (PE), crosslinked polyethylene (PE-X) and unplasticized polyamide (PA-U) pipes \x97 Test method for the resistance to internal pressure after application of... | |
| Tracked Changes (Redline) - Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes | |
| Tracked Changes (Redline) - Plastics piping systems for water supply, and for drains and sewers under pressure \x97 Polyethylene (PE) \x97 Part 1: General | |
| Tracked Changes (Redline) - Plastics piping systems for water supply, and for drains and sewers under pressure \x97 Polyethylene (PE) \x97 Part 3: Fittings | |
| Tracked Changes (Redline) - Plastics piping systems for water supply, and for drains and sewers under pressure \x97 Polyethylene (PE) \x97 Part 4: Valves for water supply systems | |
| Tracked Changes (Redline) - Plastics piping systems for water supply, and for drains and sewers under pressure \x97 Polyethylene (PE) \x97 Part 5: Fitness for purpose of the system | |
| Tracked Changes (Redline) - Plastics rainwater piping systems for above ground external use \x97 Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system | |
| Tracked Changes (Redline) - Playground equipment and surfacing \x97 Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment | |
| Tracked Changes (Redline) - Playground equipment and surfacing Part 3: Additional specific safety requirements and test methods for slides | |
| Tracked Changes (Redline) - Precast concrete products - General rules for production control of glassfibre reinforced concrete | |
| Tracked Changes (Redline) - Protective clothing - Electrostatic properties Part 5: Material performance and design requirements | |
| Tracked Changes (Redline) - Railway applications - Axleboxes - Lubricating greases | |
| Tracked Changes (Redline) - Railway applications - Axleboxes - Rolling bearings | |
| Tracked Changes (Redline) - Refrigerating systems and heat pumps \x97 Liquid level indicating devices \x97 Requirements, testing and marking | |
| Tracked Changes (Redline) - Resilient floor coverings - Cork floor tiles - Specification | |
| Tracked Changes (Redline) - Safety and control devices for burners and appliances burning gaseous or liquid fuels \x97 Control functions in electronic systems \x97 Part 2: Fuel/air ratio control/supervision of... | |
| Tracked Changes (Redline) - Safety of escalators and moving walks - Part 1: Construction and installation | |
| Tracked Changes (Redline) - Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks | |
| Tracked Changes (Redline) - Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits | |
| Tracked Changes (Redline) - Smoke and heat control systems Part 2: Natural smoke and heat exhaust ventilators | |
| Tracked Changes (Redline) - Smoke and heat control systems Part 3: Specification for powered smoke and heat control ventilators (Fans) | |
| Tracked Changes (Redline) - Wastewater lifting plants for buildings and sites Part 1: Lifting plants for wastewater containing faecal matter | |
| Tracked Changes (Redline) - Wastewater lifting plants for buildings and sites Part 2: Lifting plants for faecal-free wastewater | |
| Tracked Changes (Redline) - Wastewater lifting plants for buildings and sites Part 3: Lifting plants for limited applications | |
| Tracked Changes (Redline) - Wastewater lifting plants for buildings and sites Part 4: Non-return valves for faecal-free wastewater and wastewater containing aecal matter | |
| Tracked Changes (Redline) - Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) | |
| Tracked Changes (Redline) - Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method | |
| Tracked Changes (Redline) - Wood preservatives \x97 Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) | |
| Tractors and Machinery for Agriculture and Forestry - Guards for Power Take-off (PTO) Drive Shafts - Wear and Strength Tests | |
| Transportable Gas Cylinders - Non-Refillable Metallic Gas cylinders | |
| Tunnelling machines - Air locks - Safety requirements | |
| Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements | |
| Tunnelling machines Air locks Safety requirements | |
| Tunnelling machines Road headers, continuous miners and impact rippers Safety requirements | |
| Vacuum Drainage Systems Inside Buildings | |
| Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems | |
| Wallcoverings in Roll Form - Determination of Migration of Heavy Metals and Certain Other Elements, of Vinyl Chloride Monomer and of Formaldehyde Release | |
| Wastewater Lifting Plants for Buildings and Sites - Principles of Construction and Testing - Part 1: Lifting Plants for Wastewater Containing Faecal Matter | |
| Wastewater Lifting Plants for Buildings and Sites - Principles of Construction and Testing - Part 2: Lifting Plants for Faecal-Free Wastewater | |
| Wastewater Lifting Plants for Buildings and Sites - Principles of Construction and Testing - Part 3: Lifting Plants for Wastewater Containing Faecal Matter for Limited Applications | |
| Wastewater Lifting Plants for Buildings and Sites - Principles of Construction and Testing - Part 4: Non-Return Valves for Faecal-Free Wastewater and Wastewater Containing Faecal Matter | |
| Water Quality - Determination of Phosphorus - Ammonium Molybdate Spectrometric Method | |
| Welding Consumables - Quality Requirements for Manufacture, Supply and Distribution of Consumables for Welding and Allied Processes | |
| Welding Consumables - Tubular Cored Electrodes for Metal Arc Welding with or without a Gas Shield of Stainless and Heat-Resisting Steels - Classification | |
| Welding Consumables - Tubular Electrodes for Gas Shielded Metal Arc Welding of Creep-Resisting Steels - Classification | |
| Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Creep-Resisting Steels - Classification | |
| Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat-Resisting Steels - Classification | |
| Windows and Doors - Resistance to Repeated Opening and Closing - Test Method | |
| Wood Based Panels - Determination of Formaldehyde Content - Extraction Method Called the Perforator Method | |
| Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) | |
| Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method | |
| Wood preservatives Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) | |
| Wood-based panels - Determination of duration of load and creep factors | |
| Zero Governors for Gas Burners and Gas Burning Appliances | |
| Zinc and Zinc Alloys - Method of Sampling - Specifications | |
| Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis | |
| Zinc and Zinc Alloys - Primary Zinc |
| << Prev | Next >> |