Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
260
270
280
290
300
310
313
314
315
316
317
318
319
320
321
322
323
324
325
330
340
350
360
370
380
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Determination of Acid Value | |
| Adhesives - Determination of Hydroxyl Value and/or Hydroxyl Content | |
| Adhesives - Determination of the Softening Point of Thermoplastic Adhesives (Ring and Ball) | |
| Adhesives - Freeze-Thaw Stability | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties | |
| Advanced technical ceramics Mechanical properties of ceramic composites at ambient temperature Determination of in-plane shear properties | |
| Advanced technical ceramics Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of compression properties | |
| Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity | |
| Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods | |
| Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters | |
| Aircraft Ground Support Equipment - Specific Requirements - Part 11: Container/Pallet Dollies and Loose Load Trailers | |
| Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment | |
| Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment | |
| Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitat ed passenger boarding vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors | |
| Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment | |
| Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment | |
| Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units | |
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions | |
| Aircraft Ground Support Equipment - Specific Requirements - Part 1: Passenger Stairs | |
| Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units | |
| Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | |
| Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment | |
| Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment | |
| Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms | |
| Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders | |
| Aircraft ground support equipment - Specific requirements Part 15: Baggage and equipment tractors | |
| Aircraft ground support equipment Specific requirements Part 10: Container/Pallet transfer transporters | |
| Aircraft Ground Support Equipment Specific Requirements Part 12: Potable Water Service Equipment | |
| Aircraft Ground Support Equipment Specific Requirements Part 13: Lavatory Service Equipment | |
| Aircraft ground support equipment Specific requirements Part 14: Disabled/incapacitat ed passenger boarding vehicles | |
| Aircraft ground support equipment Specific requirements Part 15: Baggage and equipment tractors | |
| Aircraft ground support equipment Specific requirements Part 16: Air start equipment | |
| Aircraft ground support equipment Specific requirements Part 17: Air conditioning equipment | |
| Aircraft ground support equipment Specific requirements Part 18: Nitrogen or Oxygen units | |
| Aircraft ground support equipment Specific requirements Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions | |
| Aircraft ground support equipment Specific requirements Part 20: Electrical ground power units | |
| Aircraft Ground Support Equipment Specific Requirements Part 2: CateringVvehicles | |
| Aircraft ground support equipment Specific requirements Part 5: Aircraft fuelling equipment | |
| Aircraft ground support equipment Specific requirements Part 6: Deicers and deicing/antiicing equipment | |
| Aircraft ground support equipment Specific requirements Part 7: Air-craft movement equipment | |
| Aircraft ground support equipment Specific requirements Part 8: Maintenance stairs and platforms | |
| Aircraft ground support equipment Specific requirements Part 9: Container/Pallet loaders | |
| Aluminium and Aluminium Alloys - Anodizing - Part 10: Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings Using an Abrasive Jet Test Apparatus | |
| Aluminium and Aluminium Alloys - Anodizing - Part 11: Measurement of Specular Reflectance and Specular Gloss of Anodic Oxidation Coatings at Angles of 20 Degrees, 45 Degrees, 60 Degrees, and... | |
| Aluminium and Aluminium Alloys - Anodizing - Part 12: Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments | |
| Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer | |
| Aluminium and Aluminium Alloys - Anodizing - Part 14: Visual Determination of Image Clarity of Anodic Oxidation Coatings - Chart Scale Method | |
| Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation | |
| Aluminium and Aluminium Alloys - Anodizing - Part 16: Check for Continuity of Thin Anodic Oxidation Coatings - Copper Sulfate Test | |
| Aluminium and Aluminium Alloys - Anodizing - Part 17: Determination of Electric Breakdown Potential | |
| Aluminium and Aluminium Alloys - Anodizing - Part 18: Rating System for the Evaluation of Pitting Corrosion - Chart Method | |
| Aluminium and Aluminium Alloys - Anodizing - Part 19: Rating System for the Evaluation of Pitting Corrosion - Grid Method | |
| Aluminium and Aluminium Alloys - Anodizing - Part 1: Method for Specifying Decorative and Protective Anodic Oxidation Coatings on Aluminium | |
| Aluminium and Aluminium Alloys - Anodizing - Part 2: Determination of Mass per Unit Area (Surface Density) of Anodic Oxidation Coatings - Gravimetric Method | |
| Aluminium and Aluminium Alloys - Anodizing - Part 3: Determination of Thickness of Anodic Oxidation Coatings - Non-Destructive Measurement by Split-Beam Microscope | |
| Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment | |
| Aluminium and Aluminium Alloys - Anodizing - Part 5: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of Admittance | |
| Aluminium and Aluminium Alloys - Anodizing - Part 6: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric Acid/Chromic Acid... | |
| Aluminium and Aluminium Alloys - Anodizing - Part 7: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric Acid/Chromic Acid... | |
| Aluminium and Aluminium Alloys - Anodizing - Part 8: Determination of the Comparative Fastness to Ultra-Violet Light and Heat of Coloured Anodic Oxidation Coatings | |
| Aluminium and Aluminium Alloys - Anodizing - Part 9: Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus | |
| Aluminium and Aluminium Alloys - Terms and Definitions - Part 1: General Terms | |
| Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis | |
| Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry | |
| Aluminium and Aluminium Alloys - Wrought Products - Special Requirements for Products Intended for the Production of Pressure Equipment | |
| Aluminium and aluminium alloys \x97 Wrought products and cast products \x97 Special requirements for products intended for the production of pressure equipment | |
| Aluminium and aluminium alloys Terms and definitions Part 3: Scrap | |
| Bar Coding - Structured Data Files | |
| Bar Coding - Symbology Specifications - "Code 16K" | |
| Biotechnology - Equipment - Guidance on Testing Procedures for Cleanability | |
| Biotechnology - Equipment - Guidance on Testing Procedures for Leaktightness | |
| Biotechnology - Equipment - Guidance on Testing Procedures for Sterilizability | |
| Biotechnology - Guidance for Quality Control of Diagnostic Kits Used in Agriculture, Plant and Animal Pest and Disease Control and Environmental Contamination | |
| Biotechnology - Large-Scale Process and Production - Guidance for Good Practice, Procedures, Training and Control for Personnel | |
| Biotechnology - Modified Organisms for Application in the Environment - Guidance for the Sampling Strategies for Deliberate Releases of Genetically Modified Plants | |
| Biotechnology - Performance Criteria for Steam Sterilizers and Autoclaves | |
| Breathing Tubes Intended for Use with Anaesthetic Apparatus and Ventilators | |
| Building acoustics - Estimation of acoustic performance of building from the performance of elements Part 5: Sounds levels due to the service equipment | |
| Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements - Part 1: Airborne Sound Insulation between Rooms | |
| Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements - Part 2: Impact Sound Insulation between Rooms | |
| Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements - Part 3: Airborne Sound Insulation Against Outdoor Sound | |
| Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements - Part 4: Transmission of Indoor Sound to the Outside | |
| Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method | |
| Building Hardware - Padlocks and Padlock Fittings - Requirements and Test Methods | |
| Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods | |
| Changing Units for Domestic Use Part 1: Saftey Requirements | |
| Changing Units for Domestic Use Part 2: Test Methods | |
| Chemical Disinfectants and Antiseptics - Preservation of Microbial Strains Used for the Determination of Bactericidal and Fungicidal Activity | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Copper Sulfate | |
| Child use and care articles - Changing units for domestic use Part 1: Safety requirements | |
| Child use and care articles - Changing units for domestic use Part 2: Test methods | |
| Chimneys Execution standard for metal chimneys Part 1: Chimneys for non-roomsealed heating appliances | |
| Coal Tar Based Oils - Terminology | |
| Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements | |
| Coating plants Spray booths for application of organic liquid coating materials Safety requirements | |
| Copper and Copper Alloys - Determination of Spring Bending Limit on Strip | |
| Core Drilling Machines on a Stand - Safety | |
| Corrosion Protection of Metals - Electrodeposited Coatings of Cadmium on Iron or Steel | |
| Corrosion Protection of Metals - Electrodeposited Coatings of Zinc with Supplementary Treatment on Iron or Steel | |
| Crude Tar and Crude Benzole - Terminology | |
| Cryogenic Vessels - Cleanliness for Cryogenic Service | |
| Cryogenic Vessels - Methods for Performance Evaluation of Thermal Insulation | |
| Determination of the Bond Behaviour between Reinforcing Steel and Autoclaved Aerated Concrete by the "Beam Test" - Part 1: Short Term Test | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the \x93beam test\x94 Part 2: Long term test | |
| Direct Gas - Fired Washing Machines of Nominal Heat Input Not Exceeding 20 kW - Part 1: Safety | |
| Direct Gas-Fired Washing Machines, of Nominal Heat Input Not Exceeding 20 kW - Part 2: Rational Use of Energy | |
| Doors - Climatic Influences - Requirements and Classification | |
| Doors Operating forces Requirements and classification | |
| Durability of Wood and Wood-Based Products - Assessment of the Effectiveness of a Masonry Fungicide to Prevent Growth into Wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray... | |
| Equipping of Liquefied Petroleum Gas (LPG) Road Tankers | |
| Fertilizers - Determination of bulk density (loose) | |
| Fertilizers - Determination of bulk density (tapped) | |
| Fixed Firefighting Systems - Components for Sprinkler and Water Spray Systems - Part 1: Sprinklers | |
| Fixed Firefighting Systems - Components for Sprinkler and Water Spray Systems - Part 2: Wet Alarm Valve Assemblies | |
| Fixed Firefighting Systems - Components for Sprinkler and Water Spray Systems - Part 4: Water Motor Alarms | |
| Fixed firefighting systems - Components for sprinkler and water spray systems Part 12: Pumps | |
| Fixed firefighting systems - Components for sprinkler and water spray systems Part 13: ESFR sprinklers | |
| Fixed firefighting systems - Components for sprinkler and water spray systems Part 14: Sprinklers for residential applications | |
| Fixed firefighting systems - Components for sprinkler and water spray systems Part 15: Spray pattern sprinklers with a k-factor of at least K160, extended coverage sprinklers of at least K80... | |
| Fixed Firefighting Systems - Components for Sprinkler and Water Spray Systems Part 3: Dry Alarm Valve Assemblies | |
| Fixed firefighting systems - Components for sprinkler and water spray systems Part 9: Deluge alarm valves | |
| Fixed Firefighting Systems - Powder Systems - Part 1: Requirements and Test Methods for Components | |
| Fixed Firefighting Systems - Powder Systems - Part 2: Design, Construction and Maintenance | |
| Fixed firefighting systems \x97 Components for sprinkler and water spray systems Part 14: Sprinklers for residential applications | |
| Fixed firefighting systems Components for sprinkler and waterspray systems Part 5: Water flow detectors | |
| Flexible Sheet for Waterproofing - Determination of Resistance to Tearing - Part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Peel Resistance of Joints - Part 1: Bitumen Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Peel Resistance of Joints - Part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Resistance to Tearing (Nail Shank) - Part 1: Bitumen Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Shear Resistance of Joints - Part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Tensile Properties - Part 1: Bitumen Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Tensile Properties - part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Part 1: Bitumen Sheets for Roof Waterproofing - Determination of Shear Resistance of Joints | |
| Food processing machinery - Band saw machines - Safety and hygiene requirements | |
| Food processing machinery - Circular saw machines - Safety and hygiene requirements | |
| Food processing machinery - Derinding-, skinningand membrane removal machines - Safety and hygiene requirements | |
| Food processing machinery - Mincing machines - Safety and hygiene requirements | |
| Food processing machinery Band saw machines Safety and hygiene requirements | |
| Food processing machinery Circular saw machines Safety and hygiene requirements | |
| Food processing machinery Derinding-, skinning- and membrane removal machines Safety and hygiene requirements | |
| Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear | |
| Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements | |
| Footwear, leather and imitation leather goods manufacturing machines Modular shoe repair equipment Safety requirements | |
| Gas meters - Conversion devices - Part 1: Volume conversion | |
| Gas meters - Conversion devices Part 2: Energy conversion | |
| Gas Meters - Gas-Volume Electronic Conversion Devices | |
| Gas Meters - Turbine Gas Meters | |
| Gas meters \x97 Conversion devices Part 3: Flow computer | |
| Gas meters Conversion devices Part 1: Volume conversion | |
| Gas Supply Systems - Gas Pressure Regulating Installations on Service Lines - Functional Requirements | |
| Gas Supply Systems - Pressure Testing, Commissioning and Decommissioning Procedures - Functional Requirements | |
| Gas-Fired Absorption and Adsorption Air-Conditioning and/or Heat Pump Appliances with a Net Heat Input Not Exceeding 70 kW - Part 2: Rational Use of Energy | |
| Gas-Fired Absorption and Adsorption Air-Conditioning and/or Heat Pump Appliances with a Net Heat Input Not Exceeding 70 kW Part 1: Safety | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 3: Test conditions | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 4: Test methods | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 5: Requirements | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 6: Calculation of seasonal performances | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 7: Specific provisions for hybrid appliances | |
| Geotextiles and Geotextile-Related Products - Determination of the Resistance to Weathering | |
| Geotextiles and Geotextile-Related Products - General Tests for Evaluation Following Durability Testing | |
| Geotextiles and Geotextile-Related Products - Method for Determining the Microbiological Resistance by a Soil Burial Test | |
| Glass in Building - Chemically Strengthened Soda Lime Silicate Glass - Part 1: Definition and Description | |
| Glass in building Chemically strengthened soda lime silicate glass Part 2: Evaluation of conformity/Product standard | |
| Gully Tops and Manhole Tops for Vehicular and Pedestrian Areas - Design Requirements, Type Testing, Marking, Quality Control | |
| Gully tops and manhole tops for vehicular and pedestrian areas Part 1: Definitions, classification, general principles of design, performance requirements and test methods | |
| Gymnastic Equipment - Wall Bars, Lattice Ladders and Climbing Frames - Safety Requirements and Test Methods | |
| Harmonized System of Quality Assessment for Electronic Components - Sectional Specification - Radio Frequency Coaxial - Connectors Series SSMB | |
| Harmonized System of Quality Assessment for Electronic Components Generic Specification: Printed Boards | |
| Harmonized system of quality assessment for electronic components Sectional Specification: - Radio frequency coaxial connectors - Series MMCX | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Flex-Rigid Double Side Printed Boards with Through Connections | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Flex-Rigid Multilayer Printed Boards with Through Connections | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Flexible Multilayer Printed Boards with Through Connections | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series 7-16 | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series BNC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series EIA Flange | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series SMA | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series SMC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series SSMA | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series SSMC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Radio Frequency Coaxial Connectors Series TNC | |
| Harmonized system of quality assessment for electronic components. Capability detail specification: single and double sided printed boards with plain holes | |
| Harmonized system of quality assessment for electronic components: Capability detail specification: Flexible printed boards with through-connections | |
| Harmonized system of quality assessment for electronic components: Capability detail specification: Flexible printed boards without through-connections | |
| Harmonized System of Quality Assessment for Electronic Components: Capability Detail Specification: Multilayer Printed Boards | |
| Harmonized system of quality assessment for electronic components: Capability detail specification: Single and double sided printed boards with plated-through holes | |
| Harmonized System of Quality Assessment for Electronic Components: Sectional Specification: Flexible Printed Boards with Through Connections | |
| Harmonized system of quality assessment for electronic components: Sectional Specification: Single and Double Sided Printed Boards with Plain Holes | |
| Health informatics - Categorial structures for systems of concepts | |
| Health informatics - Secure user identification for health care - Management and security of authentication by passwords | |
| Health informatics - Time standards for healthcare specific problems | |
| In Vitro Diagnostic Medical Devices - Culture Media for Microbiology - Performance Criteria for Culture Media | |
| In Vitro Diagnostic Medical Devices - Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Staining in Biology | |
| In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Description of Reference Materials | |
| In Vitro Diagnostic Medical Devices - Measurement of Quantities in Samples of Biological Origin - Presentation of Reference Measurement Procedures | |
| Industrial Valves - Cast Iron Check Valves | |
| Industrial Valves - Testing of Valves Part 2: Tests, Test Procedures and Acceptance Criteria Supplementary Requirements | |
| Industrial valves Copper alloy gate valves | |
| Industrial valves Testing of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements | |
| Industrial valves. Protective caps for valves with flanged connections | |
| Inland Navigation Vessels - Rope Tubs | |
| Installations and Equipment for LNG - Suitability Testing of Gaskets Designed for Flanged Joints Used on LNG Piping | |
| Irrigation Techniques - Centre Pivot and Moving Lateral Systems - Part 1: Presentation of the Technical Characteristics | |
| Irrigation Techniques - Centre Pivot and Moving Lateral Systems - Part 2: Minimum Performances and Technical Characteristics | |
| Irrigation Techniques - Centre Pivot and Moving Lateral Systems - Part 3: Terminology and Classification | |
| Irrigation Techniques - Reel Machine Systems - Part 1: Size Series | |
| Irrigation Techniques - Reel Machine Systems - Part 2: Specifications of Polyethylene Tubes for Reel Machines | |
| Irrigation Techniques - Reel Machine Systems - Part 3: Presentation of Technical Characteristics | |
| Irrigation Techniques - Reel Machine Systems - Part 4: Check List of Users Requirements | |
| Lead and Lead Alloys - Methods of Sampling for Analysis | |
| LPG equipment and accessories - Equipping of LPG road tankers | |
| Machine Tools - Safety - Machining Centres | |
| Mountaineering Equipment - Chocks - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Connectors - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Frictional Anchors - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Harnesses - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Pulleys - Safety Requirements and Test Methods | |
| Natural Stone Test Methods - Determination of Flexural Strength under Concentrated Load | |
| Natural Stone Test Methods - Determination of Resistance to Salt Crystallization | |
| Natural Stone Test Methods - Petrographic Examination | |
| Natural stone test methods. Determination of frost resistance | |
| Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1 | |
| Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 1: Spectrometric Method | |
| Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 2: Gas Chromatographic Method | |
| Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 3: UV Spectrometric Xanthogenate Method | |
| Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 1: General Considerations | |
| Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 2: Methods for Extraction and Clean-Up | |
| Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 3: Determination and Confirmatory Tests | |
| Packaging - Flexible Tubes - Terminology | |
| Packaging - Flexible Tubes - Test Method for the Airtightness of Closures | |
| Packaging. Flexible aluminium tubes. Wall thickness determination method | |
| Paints and varnishes Coating of aluminium and aluminium alloys for architectural purposes Part 1: Coatings prepared from coating powder | |
| Paper and Board Intended for Contact with Foodstuffs - Sensory Analysis - Part 2: Off-Flavour (Taint) | |
| Paper and board intended for contact with foodstuffs. Sensory analysis. Part 1: Odour | |
| Plastics and rubber machines - Calenders - Safety requirements | |
| Plastics and rubber machines - Thermoforming machines - Safety requirements | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Initial Specific Ring Stiffness | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Wet Conditions and Calculation of the Long-Term Specific Ring Stiffness | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Long-Term Ultimate Relative Ring Deflection under Wet Conditions | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods to Prove the Leaktightness of the Wall Under Short-Term Internal Pressure | |
| Plastics Piping Systems - Systems for Hot and Cold Water - Test Method for Leaktightness under Vacuum | |
| Plastics Piping Systems - Thermoplastics Fittings - Test Method for Mechanical Strength or Flexibility of Fabricated Fittings | |
| Plastics Piping Systems - Thermoplastics Pipes and Associated Fittings for Hot and Cold Water - Test Method for Resistance of Joints to Pressure Cycling | |
| Plastics Piping Systems - Thermoplastics Pipes and Fittings for Hot and Cold Water - Test Method for the Resistance of Mounted Assemblies to Temperature Cycling | |
| Playpens for Domestic Use - Part 1: Safety Requirements | |
| Playpens for Domestic Use - Part 2: Test Methods | |
| Playpens for domestic use - Safety requirements and test methods | |
| Printing and business paper - Determination of toner adhesion | |
| Printing and business paper \x97 Requirements for copy paper for dry toner imaging processes | |
| Quality Classification of Timber Used in Pallets and Packaging | |
| Rail Systems for Supporting Medical Equipment | |
| Railway applications - Ride comfort for passengers - Measurement and evaluation | |
| Refrigerating Systems and Heat Pumps - Safety Switching Devices for Limiting the Pressure - Requirements and Tests | |
| Refrigerating systems and heat pumps Valves Requirements, testing and marking | |
| Road transport and traffic telematics - Dedicated short-range communication - Physical layer using microwave at 5.8 GHz | |
| Rotodynamic Pumps - Technical Documents - Terms, Delivery Range, Layout | |
| Rubber - or Plastic-Coated Fabrics - Accelerated Ageing Tests - Part 3: Environmental Ageing | |
| Rubber and Plastics Machines - Calenders - Safety Requirements | |
| Rubber and Plastics Machines - Thermoforming Machines - Safety Requirements | |
| Rubber- or Plastic-Coated Fabrics - Accelerated Ageing Tests Part 2: Physical Ageing: Effect of Light or Weathering | |
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method | |
| Rubber- or Plastics-Coated Fabrics - Accelerated Ageing Tests Part 1: Heat Ageing | |
| Rubber- or Plastics-Coated Fabrics - Determination of Bursting Strength - Part 1: Steel Ball Method | |
| Safety of Machine Tools - Small Numerically Controlled Turning Machines and Turning Centres | |
| Safety requirements for bonded abrasive products | |
| Safety requirements for cableway installations designed to carry persons - Quality control | |
| Safety requirements for cableway installations designed to carry persons Operation | |
| Saftey Requirements for Bonded Abrasive Products | |
| Sawn Timber Used in Industrial Packaging - Permitted Deviations and Preferential Sizes | |
| Sawn Timber Used in Pallets - Permitted Deviations and Guidelines for Dimensions | |
| Screens for Laser Working Places - Safety Requirements and Testing | |
| Sectional Specification: Flexible Printed Boards without Through Connections | |
| Sectional Specification: Radio Frequency Coaxial Connectors. Series SMB | |
| Sectional Specification: Single and Double Sided Printed Boards with Plated Through Holes | |
| Shutters, external blinds, internal blinds - Terminology, glossary and definitions | |
| Slate and Stone Products for Discontinuous Roofing and Cladding - Part 2: Methods of Test | |
| Slate and stone products for discontinuous roofing and cladding Part 1: Product specification | |
| Slurry surfacing - Requirements | |
| Slurry Surfacing - Test Methods - Part 1: Sampling for Binder Extraction | |
| Slurry Surfacing - Test Methods - Part 3: Consistency | |
| Slurry Surfacing - Test Methods - Part 6: Rate of Application | |
| Slurry surfacing - Test methods - Part 8: Visual assessment of defects | |
| Slurry surfacing Test method Part 5: Determination of wearing | |
| Slurry surfacing Test methods Part 2: Determination of residual binder content | |
| Slurry surfacing Test methods Part 4: Determination of cohesion of the mix | |
| Slurry surfacing Test methods Part 7: Shaking abrasion test | |
| Solid fertilizers Test sieving | |
| Specification for Harmonized system of quality assessment for electronic components: Sectional specification: Multilayer printed boards | |
| Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications | |
| Steel wire ropes - Safety - Part 1: General requirements | |
| Steel wire ropes - Safety - Part 2: Definitions, designation and classification | |
| Steel wire ropes - Safety - Part 3: Information for use and maintenance | |
| Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications | |
| Steel wire ropes - Safety - Part 5: Stranded ropes for lifts | |
| Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts | |
| Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts | |
| Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons | |
| Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons | |
| Steel wire ropes \x97 Safety Part 5: Stranded ropes for lifts | |
| Steel wire ropes Safety Part 10: Spiral ropes for general structural applications | |
| Steel wire ropes Safety Part 1: General requirements | |
| Steel wire ropes Safety Part 2: Definitions, designation and classification | |
| Steel wire ropes Safety Part 3: Information for use and maintenance | |
| Steel wire ropes Safety Part 4: Stranded ropes for general lifting applications | |
| Surface dressing - Requirements | |
| Surface Dressing - Specifications - Part 3: Rate of Spread and Accuracy of Spread of Binder and Chippings | |
| Surface Dressing - Test Method - Part 1: Rate of Spread and Accuracy of Spread of Binder and Chippings | |
| Surface dressing - Test methods - Part 2: Visual assessment of defects | |
| Surface dressing Test method Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method | |
| Surfaces for sports areas - Determination of ball roll behaviour | |
| Surfaces for sports areas - Determination of joint strength of synthetic surfaces | |
| Surfaces for Sports Areas - Procedure for the Preparation of Synthetic Turf and Textile Test Pieces | |
| Surfaces for sports areas Determination of sward height of natural turf | |
| Surfaces for sports areas Determination of tensile properties of synthetic sports surfaces | |
| Surfaces for sports areas Determination of thatch depth of natural turf | |
| Surfaces for sports areas Determination of vertical ball behaviour | |
| Surfaces for sports areas Method of test Determination of ground cover of natural turf | |
| Swap Bodies - Thermal Swap Bodies of Class A - Dimensions and General Requirements | |
| Swap Bodies - Thermal Swap Bodies of Class C - Dimensions and General Requirements | |
| Testing Fresh Concrete - Part 1: Sampling | |
| Testing Fresh Concrete - Part 2: Slump Test | |
| Testing Fresh Concrete - Part 3: Vebe Test | |
| Testing Fresh Concrete - Part 4: Degree of Compactability | |
| Testing Fresh Concrete - Part 5: Flow Table Test | |
| Testing Fresh Concrete - Part 6: Density | |
| Testing Fresh Concrete - Part 7: Air Content - Pressure Methods | |
| Testing fresh concrete Part 10: Self-compacting concrete - L box test | |
| Testing fresh concrete Part 11: Self-compacting concrete - Sieve segregation test | |
| Testing fresh concrete Part 12: Self-compacting concrete - J-ring test | |
| Testing fresh concrete Part 8: Self-compacting concrete - Slump-flow test | |
| Testing fresh concrete Part 9: Self-compacting concrete - V-funnel test | |
| Testing Hardened Concrete - Part 1: Shape, Dimensions and Other Requirements for Specimens and Moulds | |
| Testing Hardened Concrete - Part 2: Making and Curing Specimens for Strength Tests | |
| Testing Hardened Concrete - Part 3: Compressive Strength of Test Specimens | |
| Testing Hardened Concrete - Part 4: Compressive Strength - Specification for Testing Machines | |
| Testing Hardened Concrete - Part 5: Flexural Strength of Test Specimens | |
| Testing Hardened Concrete - Part 6: Tensile Splitting Strength of Test Specimens | |
| Testing Hardened Concrete - Part 7: Density of Hardened Concrete | |
| Testing Hardened Concrete - Part 8: Depth of Penetration of Water Under Pressure | |
| Testing hardened concrete Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide | |
| Testing hardened concrete Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| Testing hardened concrete Part 12: Determination of the carbonation resistance of concrete \x97 Accelerated carbonation method | |
| Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression | |
| Testing hardened concrete Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process | |
| Testing hardened concrete Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process | |
| Testing hardened concrete Part 16: Determination of the shrinkage of concrete | |
| Testing hardened concrete Part 17: Determination of creep of concrete in compression | |
| Testing hardened concrete Part 18: Determination of the chloride migration coefficient | |
| Testing of hardened concrete - Determination of electrical resistivity | |
| Thermal performance of windows, doors and shutters Determination of thermal transmittance by hot box method Part 2: Frames | |
| Thermal performance of windows, doors and shutters Determination of thermal transmittance by hot box method Part 4: Roller shutter boxes | |
| Touch and Close Fasteners - Determination of Dimensional Change in Washing and Drying and Dry Cleaning | |
| Touch and Close Fasteners - Determination of Peel Strength | |
| Touch and Close Fasteners - Determination of the Overall and Effective Widths of Tapes and the Effective Width of a Closure | |
| Touch and Close Fasteners - Method for Closure Prior to Washing and Drying or Dry Cleaning | |
| Tracked Changes (Redline) - Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | |
| Tracked Changes (Redline) - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | |
| Tracked Changes (Redline) - Aircraft ground support equipment - Specific requirements Part 13: Lavatory service equipment | |
| Tracked Changes (Redline) - Aircraft ground support equipment - Specific requirements Part 8: Maintenance or service stairs and platforms | |
| Tracked Changes (Redline) - Aircraft ground support equipment \x97 Specific requirements Part 12: Potable water service equipment | |
| Tracked Changes (Redline) - Aircraft ground support equipment \x97 Specific requirements Part 6: Deicers and de-icing/anti-icing equipment | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys \x97 Wrought products and cast products \x97 Special requirements for products intended for the production of pressure equipment | |
| Tracked Changes (Redline) - Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter | |
| Tracked Changes (Redline) - Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 5: Sounds levels due to the service equipment | |
| Tracked Changes (Redline) - Building hardware \x97 Mechanically operated locks and locking plates \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Building hardware \x97 Padlocks and padlock fittings \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity | |
| Tracked Changes (Redline) - Doors - Operating forces - Requirements and classification | |
| Tracked Changes (Redline) - Fixed firefighting systems \x97 Powder systems \x97 Part 1: Requirements and test methods for components | |
| Tracked Changes (Redline) - Flexible sheets for waterproofing - Determination of resistance to tearing Part 2: Plastic and rubber sheets for roof waterproofing | |
| Tracked Changes (Redline) - Flexible sheets for waterproofing \x97 Determination of resistance to tearing (nail shank) \x97 Part 1: Bitumen sheets for roof waterproofing | |
| Tracked Changes (Redline) - Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements | |
| Tracked Changes (Redline) - Food processing machinery \x97 Mincing machines \x97 Safety and hygiene requirements | |
| Tracked Changes (Redline) - Gas meters - Conversion devices Part 1: Volume conversion | |
| Tracked Changes (Redline) - Gas meters - Turbine gas meters | |
| Tracked Changes (Redline) - Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions | |
| Tracked Changes (Redline) - Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 6: Calculation of seasonal performances | |
| Tracked Changes (Redline) - LPG equipment and accessories \x97 Equipping of LPG road tankers | |
| Tracked Changes (Redline) - Natural stone test methods - Determination of flexural strength under concentrated load | |
| Tracked Changes (Redline) - Natural stone test methods \x96 Petrographic examination | |
| Tracked Changes (Redline) - Natural stone test methods \x97 Determination of resistance to salt crystallisation | |
| Tracked Changes (Redline) - Packaging \x97 Flexible tubes \x97 Terminology | |
| Tracked Changes (Redline) - Packaging \x97 Flexible tubes \x97 Test method for the air tightness of closures | |
| Tracked Changes (Redline) - Railway applications - Ride comfort for passengers - Measurement and evaluation | |
| Tracked Changes (Redline) - Safety requirements for cableway installations designed to carry persons \x96 Operation | |
| Tracked Changes (Redline) - Shutters, external blinds, internal blinds - Terminology, glossary and definitions | |
| Tracked Changes (Redline) - Slurry surfacing - Test method Part 5: Determination of the minimum binder content and wearing resistance | |
| Tracked Changes (Redline) - Slurry surfacing - Test methods Part 4: Determination of cohesion of the mix | |
| Tracked Changes (Redline) - Slurry surfacing \x96 Test methods Part 1: Sampling of slurry surfacing mixture | |
| Tracked Changes (Redline) - Slurry surfacing \x96 Test methods Part 2: Determination of residual binder content including preparation of samples | |
| Tracked Changes (Redline) - Slurry surfacing \x96 Test methods Part 3: Consistency | |
| Tracked Changes (Redline) - Steel wire ropes - Safety Part 5: Stranded ropes for lifts | |
| Tracked Changes (Redline) - Surfaces for sports areas - Test method for the determination of tensile properties of synthetic sports surfaces | |
| Tracked Changes (Redline) - Testing fresh concrete Part 1: Sampling and common apparatus | |
| Tracked Changes (Redline) - Testing fresh concrete Part 2: Slump test | |
| Tracked Changes (Redline) - Testing fresh concrete Part 3: Vebe test | |
| Tracked Changes (Redline) - Testing fresh concrete Part 4: Degree of compactability | |
| Tracked Changes (Redline) - Testing fresh concrete Part 5: Flow table test | |
| Tracked Changes (Redline) - Testing fresh concrete Part 6: Density | |
| Tracked Changes (Redline) - Testing fresh concrete Part 7: Air content - Pressure methods | |
| Tracked Changes (Redline) - Testing fresh concrete Part 8: Self-compacting concrete - Slump-flow test | |
| Tracked Changes (Redline) - Testing hardened concrete - Part 6: Tensile splitting strength of test specimens | |
| Tracked Changes (Redline) - Testing hardened concrete \x97 Part 4: Compressive strength \x97 Specification for testing machines | |
| Tracked Changes (Redline) - Testing hardened concrete Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide | |
| Tracked Changes (Redline) - Testing hardened concrete Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| Tracked Changes (Redline) - Testing hardened concrete Part 2: Making and curing specimens for strength tests | |
| Tracked Changes (Redline) - Testing hardened concrete Part 3: Compressive strength of test specimens | |
| Tracked Changes (Redline) - Testing hardened concrete Part 5: Flexural strength of test specimens | |
| Tracked Changes (Redline) - Testing hardened concrete Part 7: Density of hardened concrete | |
| Tracked Changes (Redline) - Testing hardened concrete Part 8: Depth of penetration of water under pressure | |
| Tracked Changes (Redline) - Traffic control equipment - Signal heads | |
| Tracked Changes (Redline) - Traffic control equipment - Warning and safety light devices | |
| Tracked Changes (Redline) - Transportable gas cylinders \x97 Fully wrapped composite cylinders | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 10: Safety principles | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 11: General data required | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 12: Control and automation | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/floccu lation | |
| Tracked Changes (REdline) - Wastewater treatment plants - Part 14: Disinfection | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 6: Activated sludge process | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 8: Sludge treatment and storage | |
| Tracked Changes (Redline) - Wastewater treatment plants - Part 9: Odour control and ventilation | |
| Tracked Changes (Redline) - Wastewater treatment plants \x97 Part 16: Physical (mechanical) filtration | |
| Tracked Changes (Redline) - Wastewater treatment plants \x97 Part 1: General design and construction principles | |
| Tracked Changes (Redline) - Wastewater treatment plants \x97 Part 3: Preliminary treatment | |
| Tracked Changes (Redline) - Wastewater treatment plants \x97 Part 4: Primary treatment | |
| Tracked Changes (Redline) - Wastewater treatment plants \x97 Part 5: Lagooning processes | |
| Tracked Changes (Redline) - Windows and doors - Resistance to wind load - Classification | |
| Tracked Changes (Redline) - Windows and doors \x97 Air permeability \x97 Classification | |
| Tracked Changes (Redline) - Windows and doors \x97 Resistance to wind load \x97 Test method | |
| Tracked Changes (Redline) - Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards | |
| Tracked Changes (Redline) - Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels | |
| Tracked Changes (Redline) - Wood-based panels \x97 Characteristic values for structural design \x97 Part 2: Plywood | |
| Tracked Changes (Redline) - Workshop fabricated steel tanks Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other... | |
| Tracked Changes (Redline) - Workshop fabricated steel tanks Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for... | |
| Traffic Control Equipment - Signal Heads | |
| Traffic Control Equipment - Warning and Safety Light Devices | |
| Transportable Gas Cylinders - Fully Wrapped Composite Cylinders | |
| Transportable Gas Cylinders - Seamless, Hoop-Wrapped Composite Cylinders | |
| Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements | |
| Tunnelling machines Shield machines, thrust boring machines, auger boring machines, lining erection equipment Safety requirements | |
| Underground mining machinery - Specification for the safety requirements of armoured face conveyors | |
| Underground mining machinery Specification for the safety requirements of armoured face conveyors | |
| Vehicle Parking Control Equipment - Pay and Display Ticket Machine - Technical and Functional Requirements | |
| Ventilation for Buildings - Air Terminal Devices - Aerodynamic Testing and Rating for Displacement Flow Applications | |
| Ventilation for Buildings - Air Terminal Devices - Aerodynamic Testing and Rating for Mixed Flow Application | |
| Ventilation for Buildings - Ductwork - Dimensions of Circular Flanges for General Ventilation | |
| Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts | |
| Ventilation for Buildings - Ductwork Hangers and Supports - Requirements for Strength | |
| Wastewater Treatment Plants - Part 10: Safety Principles | |
| Wastewater Treatment Plants - Part 11: General Data Required | |
| Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/floccu lation | |
| Wastewater Treatment Plants - Part 1: General Construction Principles | |
| Wastewater Treatment Plants - Part 3: Preliminary Treatment | |
| Wastewater Treatment Plants - Part 4: Primary Settlement | |
| Wastewater Treatment Plants - Part 5: Lagooning Processes | |
| Wastewater Treatment Plants - Part 6: Activated Sludge Process | |
| Wastewater Treatment Plants - Part 7: Biological Fixed-Film Reactors | |
| Wastewater Treatment Plants - Part 8: Sludge Treatment and Storage | |
| Wastewater Treatment Plants - Part 9: Odour Control and Ventilation | |
| Wastewater treatment plants Part 12: Control and automation | |
| Wastewater treatment plants Part 14: Disinfection | |
| Wastewater treatment plants Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants | |
| Wastewater treatment plants Part 16: Physical (mechanical) filtration | |
| Water quality - Determination of chromium - Atomic absorption spectrometric methods | |
| Water quality - Determination of mercury - Enrichment methods by amalgamation | |
| Water quality Determination of nitrogen Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides | |
| Welding - Multilingual Terms for Welded Joints with Illustrations | |
| Windows and Doors - Air Permeability - Classification | |
| Windows and Doors - Resistance to Wind Load - Classification | |
| Windows and Doors - Resistance to Wind Load - Test Methods | |
| Windows and Doors - Watertightness - Classification | |
| Windows and pedestrian doors Mechanical durability Requirements and classification | |
| Wood-Based Panels - Characteristic Values for Structural Design - Part 1: OSB, Particleboards and Fibreboards | |
| Wood-based panels - Characteristic values for structural design Part 3: Solid-wood panels | |
| Wood-based panels Characteristic values for structural design Part 2: Plywood | |
| Workplace Atmospheres - Pumps for Personal Sampling of Chemical Agents - Requirements and Test Methods | |
| Workplace Atmospheres - Short Term Detector Tube Measurement Systems - Requirements and Test Methods | |
| Workshop fabricated steel tanks Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids | |
| Workshop fabricated steel tanks Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids | |
| Workshop fabricated steel tanks Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of... |
| << Prev | Next >> |