Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
170
180
190
200
210
220
227
228
229
230
231
232
233
234
235
236
237
238
239
240
250
260
270
280
290
300
350
400
450
500
550
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) ASSEMBLY NUT AND CLIP, REMOVABLE SELF-LOCKING NUT | |
| (R) ASSEMBLY NUT, PLATE, REMOVABLE SELF-LOCKING NUT | |
| (R) BASKET, REMOVABLE SELF-LOCKING NUT, UNS S66286 | |
| (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, MACHINE, DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07718 .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, MACHINE,DOUBLE HEX ,EXT WASHER HEAD,CLOSE TOLERANCE SHANK, UNS N07718 .2500-28UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, MACHINE,DOUBLE HEX, EXT WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07718 .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, MACHINE,DOUBLE HEX, EXT WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07718 .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| (R) BOLT, SHEAR - DOUBLE HEX HEAD, UNS N07718 - 185 KSI | |
| (R) BOLT, SHEAR - DOUBLE HEX HEAD, UNS S66286 - 160 KSI | |
| (R) CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) | |
| (R) CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E) | |
| (R) CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 3 (CLASS L AND E) | |
| (R) CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, UTILITY | |
| (R) CONNECTOR, PLUG, ELECTRIC, UTILITY | |
| (R) CONNECTOR, PLUG, ELECTRICAL, SELF-LOCKING, COUPLING NUT, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| (R) CONNECTOR, RECEPTACLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC OPERATING POWER | |
| (R) CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE WITH | |
| (R) CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) | |
| (R) CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, SOLDER TYPE, BOX MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS H) | |
| (R) CONNECTORS, PLUG, ELECTRICAL, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| (R) CONNECTORS, RECEPTACLE, ELECTRIC, CABLE CONNECTING, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| (R) CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE | |
| (R) CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| (R) COVER FOR USE WITH MS90362 EXTERNAL POWER RECEPTACLE | |
| (R) GASKET, METALLIC, ENCASED, ANNULAR, COPPER | |
| (R) Insert - Screw Thread, Thin Wall, Self-Locking UNS NO7718, Silver Plated, Class: 185 ksi/1025 Degrees F, Procurement Specification | |
| (R) Insert - Screw Thread, Thin Wall, Self-Locking, UNS N07718, Silver Plated, Class: 185 ksi/1025 \xb0F, Procurement Specification | |
| (R) Insert -Thin Wall , Self-Locking Short and Long Length Installation and Removal of | |
| (R) INSERT, SCREW THREAD, NON-LOCKING, LOCKED IN, KEY LOCKED, EXTRA HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286 | |
| (R) INSERT, SCREW THREAD, NON-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286 | |
| (R) NUT, SELF LOCKING, HEXAGON, REGULAR HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| (R) NUT, SELF-LOCKING, 12 POINT, REDUCED HEIGHT, SILVER PLATE, UNS S66286 | |
| (R) NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNS G41300 OR UNS G43400, UNJ 16 PITCH THREAD FORM | |
| (R) NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, COUNTERBORED 180 KSI, 1400 \xb0F, UNS N07001 | |
| (R) NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, EXTENDED WRENCH PAD 180 KSI, 1400 \xb0F, UNS N07001 | |
| (R) Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 160 ksi, 800 Degrees F, UNS S66286 | |
| (R) Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Extended Wrench Pad 160 ksi, 800 Degrees F, UNS S66286 | |
| (R) NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 \xb0F | |
| (R) NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 DEGREES F | |
| (R) Nut, Self-Locking, Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| (R) NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| (R) Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| (R) NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| (R) Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| (R) NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| (R) Nut, Self-Locking, Plate, Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| (R) Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286 Class: 125 ksi/800 Degrees F | |
| (R) NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| (R) NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| (R) Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| (R) Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class:125 ksi/800 Degrees F | |
| (R) Nut, Self-Locking, Shank, UNS N07001 Silver Plate, UNJ Thread | |
| (R) NUT, SELF-LOCKING, SHANK, UNS S66286 SILVER PLATE ON THD ONLY, UNJ THREAD | |
| (R) O-RING MOLDED FROM AMS7270 BUTADIENE-ACRYLONITR ILE (NBR) RUBBER MATERIAL | |
| (R) O-Ring Molded from AMS7272 Butadiene-Acrylonitr ile Rubber (NBR) | |
| (R) O-Ring Molded from AMS7274 Material | |
| (R) SLEEVE, REMOVABLE SELF-LOCKING NUT, UNS S30403 | |
| (R) STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 ksi/1200 \xb0F, HEAVY-DUTY, SELF-BROACHING KEYS | |
| (R) STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 ksi/1200 \xb0F, LIGHTWEIGHT, SELF-BROACHING KEYS | |
| Acceptance testing and in-service testing - Electromedical equipment | |
| Accident action pack for motorists | |
| Acoustics - Methods for measurement of airborne noise emitted by powered lawnmowers, edge and brush cutters and string trimmers | |
| Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes | |
| Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings | |
| ADAPTER, CABLE CLAMP TO CABLE, BUSHING, TELESCOPING | |
| Adhesives - Epoxy - For raised pavement marker installation | |
| Adhesives for floor and wall applications - Resilient vinyl, linoleum and rubber sheet and tiles - Interior and exterior use | |
| Amusement rides and devices - Design and construction | |
| Amusement rides and devices - Operation and maintenance | |
| Amusement rides and devices - Specific requirements, Part 4.5: Waterborne inflatables | |
| Amusement rides and devices, Part 1: Design and construction - Intrinsic safety (Supplement to AS 3533.1-1997) | |
| Amusement rides and devices, Part 2: Operation and maintenance - Logbook (Supplement to AS 3533.2-1997) | |
| Amusement rides and devices, Part 3: In-service inspection | |
| Amusement rides and devices, Part 4.1: Specific requirements - Land-borne inflatable devices | |
| Amusement rides and devices, Part 4.2: Specific requirements - Contained play facilities | |
| Amusement rides and devices, Part 4.3: Specific requirements - Roller coasters | |
| Amusement rides and devices, Part 4.4: Specific requirements - Concession go-karts | |
| Amusement rides and devices, Part 4.5: Specific requirements - Waterborne inflatables | |
| Amusement rides and devices | |
| ASSEMBLY NUT AND CLIP, REMOVABLE SELF-LOCKING NUT, UNS S66286, CLASS 160 KSI/1200 \xbaF | |
| Assembly Nut and Clip, Removable Self-Locking Nut, UNS S66286 | |
| Assembly Nut, Plate, Removable Self-Locking Nut | |
| Authorization requirements for plumbing products - Domestic type water treatment appliances | |
| Authorization requirements for plumbing products - Flexible tubes | |
| Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps | |
| Authorization requirements for plumbing products - Water heaters and hot-water storage tanks | |
| Automotive diesel fuel | |
| Automotive repairs - Terminology - Constant velocity joints | |
| Automotive repairs - Terminology - Manual transmission | |
| Automotive repairs - Terminology - Power steering | |
| Automotive repairs - Terminology - Transaxle | |
| Automotive repairs - Terminology, Part 1: Automatic transmission | |
| Automotive repairs - Terminology, Part 5: Engine | |
| B.S2 Chain (3/8\x94 Pitch) & Fittings Assembly Code | |
| Bank cards - Magnetic stripe data content for Track 3 | |
| Basket, Removable Self-Locking Nut, UNS S66286 | |
| Bidettes and bidets | |
| BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, DRILLED HEAD, UNS S66286 - 160 KSI | |
| BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286 - 160 KSI | |
| BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS NO7718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .250-28UNJF-3A (Stress Rupture Resistant) | |
| Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .3125-24UNJF- 3A (Stress Rupture Resistant) | |
| Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .375-24UNJF-3A (Stress Rupture Resistant) | |
| BOLT, MACHINE \xb1 HEXAGON HEAD, PD SHANK UNS NO7718, 185 KSI MIN, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE, DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .2500-28UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN.3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662 .190- 32UNJF-3A (Stress Rupture Resistant) | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .250- 28UNJF-3A (Stress Rupture Resistant) | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .375- 24UNJF-3A (Stress Rupture Resistant) | |
| BOLT, MACHINE,DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, MACHINE,DOUBLE HEX, EXT WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07718 .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) | |
| BOLT, SHEAR - DOUBLE HEX HEAD, DRILLED SHANK UNS S66286 - 160 KSI | |
| Bolt, Shear - Double Hex Head, Drilled Shank, UNS N07718 - 185 ksi | |
| BOLT, SHEAR - DOUBLE HEX HEAD, UNS N07718 - 185 KSI | |
| Bolt, Shear - Double Hex Head, UNS S66286 - 160 ksi | |
| BOLT, SHEAR \x96 DOUBLE HEX HEAD, DRILLED SHANK UNS N07718 \x96 185 ksi | |
| Breath alcohol electronic testing devices for personal use | |
| Breath alcohol testing devices | |
| Brushcutters - Guide to safe working practices | |
| Brushcutters - Safety requirements | |
| Building elements - Testing and rating for intruder resistance | |
| Building elements, Part 1: Testing and rating for intruder resistance - Intruder-resistant panels | |
| Cable, Safety, Kit - Corrosion and Heat Resistant Steel | |
| CABLE, SAFETY, KIT - CORROSION RESISTANT STEEL | |
| CABLE, SAFETY, KIT, CORROSION AND HEAT RESISTANT STEEL, UNS S32100 | |
| CABLE, SAFETY, KIT, CORROSION AND HEAT RESISTANT STEEL | |
| CABLE, SAFETY, KIT, CORROSION RESISTANT STEEL, UNS S30400 | |
| CABLE, SAFETY, KIT, NICKEL ALLOY, UNS N0660 (STABILIZED TYPE) | |
| CABLE, SAFETY, KIT, NICKEL ALLOY, UNS N0660 | |
| CABLE, SAFETY, KIT, NICKEL ALLOY | |
| Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications | |
| CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) | |
| CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E) | |
| Connector, Plug, Electric, Crimp Type, Rack and Panel, Series 3 (Class L and E) | |
| CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, QUICK DISCONNECT, UTILITY | |
| CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, UTILITY | |
| CONNECTOR, PLUG, ELECTRIC, UTILITY | |
| CONNECTOR, PLUG, ELECTRICAL, SELF-LOCKING, COUPLING NUT, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| CONNECTOR, RECEPTACLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC OPERATING POWER | |
| CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE WITH | |
| CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) | |
| CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, WALL MOUNTING FLANGE, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) | |
| CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, SOLDER TYPE, BOX MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS H) | |
| Connectors, Plug, Electrical, Rear Release, Crimp Contact, AN Type | |
| Connectors, Receptacle, Electrical, Cable Connecting, Rear Release, Crimp Contact, AN Type | |
| CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE | |
| CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE | |
| Conveyor belting guide to splicing steel cord belting | |
| COVER - TYPE XVI, XVII-C, D, E, AND F ENGINE ACCESSORY DRIVE | |
| Cover for Use with MS90362 external Power Receptacle | |
| Cylindrical screw threads - Vocabulary | |
| Data communication - Arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits | |
| Dental materials - Phosphate-bonded casting investments | |
| Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011, MOD) | |
| Earth-moving machinery \x97 Guards \x97 Definitions and requirements | |
| Electric cables - Aerial bundled - Voltages up to and including 0.6/1 kV | |
| Electrical equipment for coal mines - Glossary of terms | |
| Electromagnetic interference - Limits and methods of measurement of information technology equipment | |
| Fire blankets | |
| Fittings, Lubrication | |
| Form of formal instrument of agreement | |
| Gasket - 37 Degree Flared Tube Fitting, Nickel, AMS-5553 | |
| GASKET - 37\xb0 FLARED TUBE FITTING, NICKEL, AMS 5553 | |
| GASKET - 37\xb0 FLARED TUBE FITTING, NICKEL, AMS5553 | |
| GASKET - ENGINE ACCESSORY DRIVE | |
| GASKET - TYPE X OR XV ENGINE ACCESSORY DRIVE | |
| GASKET - TYPE XI ENGINE ACCESSORY DRIVE | |
| GASKET - TYPE XII, XIV A AND XIV B ENGINE ACCESSORY DRIVE | |
| GASKET - TYPE XIII ENGINE ACCESSORY DRIVE | |
| Gasket - Type XIV-C Engine Accessory Drive | |
| GASKET - TYPE XIX ENGINE ACCESSORY DRIVE | |
| GASKET - TYPE XVI ENGINE ACCESSORY DRIVE | |
| GASKET, METALLIC, ENCASED, ANNULAR, COPPER | |
| Gasket-37 Degree Flared Tube Fitting, Nickel, AMS 5553 | |
| General conditions of contract for the supply of equipment | |
| Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications | |
| Gold and gold bearing alloys - Determination of gold content (30 percent - 99.5 percent) - Gravimetric method | |
| Gold and gold bearing alloys - Determination of gold content (greater than 99.5 percent) - Gravimetric method | |
| Gold and gold bearing alloys - Determination of gold content (less than 30%) - Gravimetric method | |
| Gold and gold bearing alloys, Part 4: Determination of gold content (greater than 99.95%) - Inductively coupled plasma - Atomic emission spectrometry | |
| Hand-operated screwdrivers and screwdriver bits - Bits for manually driven and power-driven screwdrivers | |
| Hand-operated screwdrivers and screwdriver bits - Insulated screwdrivers | |
| Hand-operated screwdrivers and screwdriver bits - Screwdrivers for slotted and cross-recessed fasteners | |
| HANDLE - PROPELLER SHAFT WRENCH | |
| Hexagon wrench keys and wrench bits for high-strength fasteners | |
| HUB - WOOD PROPELLER - TAPER TYPE NUMBER 0 | |
| Identification cards - Financial transaction cards | |
| Identification cards - Identification of issuer, Part 1: Numbering system | |
| Identification cards - Identification of issuers - Application and registration procedures | |
| Identification cards - Identification of issuers, Part 3: Australian national numbering system and registration procedures | |
| Identification cards - Numbering system and registration procedure for issuer identifiers | |
| Identification cards - Physical characteristics | |
| Identification cards - Recording technique - Embossing | |
| Identification cards - Recording technique - Location of embossed characters on ID-1 cards | |
| Identification cards - Recording technique - Magnetic stripe | |
| Identification cards - Recording technique, Part 4: Location of read-only magnetic tracks - Tracks 1 and 2 | |
| Identification cards - Recording technique, Part 5: Location of read-write magnetic track - Track 3 | |
| Identification cards - Recording technique, Part 6: Magnetic stripe - High coercivity | |
| Industrial vacuum cleaners for particulates hazardous to health | |
| Information processing - Text and office systems - Standard generalized markup language (SGML) | |
| Information processing systems - Data communication - High-level data link control balanced classes of procedures - Data-link layer address resolution/negotiati on in switched environments | |
| Information processing systems - Data communication - High-level data link control procedures - Description of the X.25 LAPB-compatible DTE data link procedures - Conformance requirements (Supplement to AS 3512-1987) | |
| Information processing systems - Data communication - High-level data link control procedures - Description of the X.25 LAPB-compatible DTE data link procedures | |
| Information processing systems - Data communication - Multilink procedures | |
| Insert - Screw Thread, Thin Wall, Self-Locking UNS NO7718, Silver Plated, Class: 185 ksi/1025 Degrees F, Procurement Specification (FSC5340) | |
| Insert - Thin Wall, Long Self-Locking 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread | |
| INSERT - THIN WALL, LONG, SELF-LOCKING, 1025 \xb0F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD | |
| Insert - Thin Wall, Self-Locking Short and Long Length Installation and Removal of | |
| Insert - Thin Wall, Self-Locking Short and Long Length, Installation and Removal of | |
| INSERT - THIN WALL, SHORT AND LONG HOLE PREPARATION FOR | |
| Insert - Thin Wall, Short and Long, Hole Preparation for | |
| Insert - Thin Wall, Short Self-Locking, 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread | |
| INSERT - THIN WALL, SHORT, SELF-LOCKING, 1025 \xb0F, SILVER PLATED ON INTERNAL SURFACES ONLY UNS N07718, UNJ THREAD | |
| INSERT - THIN WALL, SHORT, SELF-LOCKING, 1025 \xb0F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD | |
| Insert, Screw Thread, Non-Locking, Locked in, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286 | |
| INSERT, SCREW THREAD, NON-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286 | |
| INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286 | |
| INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286 | |
| INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE | |
| INSERT, SCREW THREAD, SELF-LOCKING LOCKED IN, KEY LOCKED, EXTRA HEAVY DUTY, SELF-BROACHING KEYS, UNS S66286 | |
| Insert, Screw Thread, Self-Locking, Locked in, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286 | |
| INSERT, SCREW THREAD, SELF-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286 | |
| Lighting equipment for bicycles | |
| Logbook (Supplement to AS 3533-1988) - Amusement rides and devices | |
| Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for construction sites (ACS) | |
| Low-voltage switchgear and controlgear assemblies - Particular requirements for busbar trunking systems (busways) | |
| Low-voltage switchgear and controlgear assemblies - Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution... | |
| Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies | |
| LP gas fuel vessels for automotive use | |
| Meters for cold and heated drinking and non-drinking water supplies, Part 1: Technical requirements | |
| Meters for cold and heated drinking and non-drinking water supplies, Part 4: In-service compliance testing | |
| Meters for cold potable water - Combination meters | |
| Meters for cold potable water - Water meters with integral dual check valves | |
| Meters for cold potable water | |
| Meters for water supply - Water meters with two integral single check valves | |
| Methods for the analysis of waters, Part 1: Determination of dissolved sulphide - spectrophotometric method | |
| Methods of test for teat skin disinfectants | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 10: Determination of thermal expansion under load of laundry troughs | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 11: Determination of impact resistance of baths for ablutionary purposes | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 12: Determination of resistance to thermal shock of baths for ablutionary purposes | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 13: Determination of thermal distortion of baths for ablutionary purposes | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 14: Determination of thermal expansion under load of baths for ablutionary purposes | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 15: Determination of impact resistance of washbasins | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 16: Determination of resistance to thermal shock of washbasins | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 17: Determination of impact resistance of shower bases and shower modules | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 18: Determination of resistance to thermal shock of shower bases and shower modules | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 19: Determination of impact resistance of sinks | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 1: Determination of water absorption characteristics | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 20: Determination of resistance to thermal shock of sinks | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 21: Determination of thermal expansion under load of sinks | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 22: Determination of thermal distortion of sinks | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 23: Determination of resistance to heat of the surface of sinks | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 24: Determination of resistance to hot liquids of the surface of sinks | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 2: Determination of chemical and stain resistance | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 3: Determination of colour fastness | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 4: Determination of resistance to surface scratching | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 5: Determination of degradation by ultraviolet light | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 6: Visual examination of surface finish for defects | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 7: Determination of impact resistance of laundry troughs | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 8: Determination of resistance to thermal shock of laundry troughs | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 9: Determination of thermal distortion of laundry troughs | |
| Methods of testing plastics and composite materials sanitary plumbing fixtures, Part 0: Introduction and list of methods | |
| National Plumbing and Drainage Code - Glossary of terms | |
| National Plumbing and Drainage Code - Water supply | |
| National Plumbing and Drainage Code, Part 2: Sanitary plumbing and sanitary drainage | |
| National plumbing and drainage code, Part 3: Stormwater drainage | |
| National Plumbing and Drainage Code, Part 4: Hot water supply systems | |
| National Plumbing and Drainage, Part 2.1: Sanitary plumbing and drainage - Performance requirements | |
| National plumbing and drainage, Part 3.1: Stormwater drainage - Performance requirements | |
| National Plumbing and Drainage, Part 4.1: Hot water supply systems - Performance requirements | |
| Non-destructive testing - Radiographic determination of quality of ferrous castings | |
| Non-destructive testing - Radiography of steel castings and classification of quality | |
| Non-destructive testing, Part 1: Guide to radiography for ferrous castings | |
| NUT, SELF LOCKING - DOUBLE HEXAGON, EXTENDED WASHER, UNS S66286, SILVER PLATED, UNJ THREAD | |
| NUT, SELF LOCKING, HEXAGON, REGULAR HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| NUT, SELF LOCKING, HEXAGON, REGULAR HEIGHT, UNS S66286, CLASS: 125 KSI/800 DEGREED F | |
| NUT, SELF-LOCKING, 12 POINT, REDUCED HEIGHT, SILVER PLATE, UNS S66286, CLASS 160 KSI/1200\xbaF | |
| Nut, Self-Locking, 12 Point, Reduced Height, Silver Plate, UNS S66286 | |
| Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form | |
| NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNS G41300 OR UNS G43400, UNJ 16 PITCH THREAD FORM | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, COUNTERBORED 180 KSI, 1400 \xb0F, UNS N07001 | |
| Nut, Self-Locking, Double Hexagon, Silver Plated, Counterbored 180 ksi, 1400 Degrees F, UNS N07001 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, EXTENDED WRENCH PAD 180 KSI, 1400 \xb0F, UNS N07001 | |
| Nut, Self-Locking, Double Hexagon, Silver Plated, Extended Wrench Pad 180 ksi, 1400 Degrees F, UNS N07001 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, REDUCED HEIGHT 180 KSI, 1400 \xb0F, UNS N07001 | |
| Nut, Self-Locking, Double Hexagon, Silver Plated, Reduced Height 180 ksi, 1400 Degrees F, UNS N07001 | |
| Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 145 ksi, 1200 Degrees F, UNS S66286 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 \xb0F, UNS S66286 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 Degree F, UNS S66286 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 DEGREES F, UNS S66286 | |
| Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Extended Wrench Pad 145 ksi, 1200 Degrees F, UNS S66286 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 \xb0F, UNS S66286 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 DEGREE F, UNS S66286 | |
| NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 DEGREES F, UNS S66286 | |
| NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 DEGREES F | |
| NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 DEGREES F | |
| Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| Nut, Self-Locking, Plate, Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286 Class: 125 ksi/800 Degrees F | |
| NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 DEGREES F | |
| NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 \xb0F | |
| Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F | |
| Nut, Self-Locking, Shank, UNS N07001 Silver Plate UNJ Thread | |
| NUT, SELF-LOCKING, SHANK, UNS N07001 SILVER PLATE, UNJ THREAD | |
| Nut, Self-Locking, Shank, UNS S66286 Silver Plate on THD Only, UNJ Thread | |
| NUT, SELF-LOCKING, SHANK, UNS S66286 SILVER PLATE ON THREAD ONLY, UNJ THREAD | |
| NUTS, SHEAR, SLOTTED HEXAGON - AIRCRAFT ENGINE | |
| Oils for reducing the viscosity of residual bitumen for pavements | |
| Packing, Preformed - O-Ring Seal AMS 7270 | |
| Packing, Preformed - O-Ring Seal AMS 7272 | |
| Packing, Preformed - O-Ring Seal AMS 7274 | |
| Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice | |
| Performance of household electrical appliances - Motor-operated food preparation appliances | |
| PIN - PROPELLER SHAFT WRENCH | |
| Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718 | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 0: Introduction and list of methods | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 10: Determination of the initial ring stiffness of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 11: Determination of the initial ring deflection of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 12: Determination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 13: Determination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 14: Determination of long-term ring deflection of glass filament reinforced plastics (GRP) pipe subject to constant load and... | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 15: Determination of resistance to long-term strain corrosion of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 16: Testing of flexible joints of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 1: Preparation of glass filament reinforced plastics test specimens | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 2: Determination of chemical resistance of glass filament reinforced plastics | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 3: Determination of loss on ignition of glass filament reinforced plastics | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 4: Determination of the dimensions of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 5: Determination of hoop tensile strength of wound glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 6: Determination of hoop tensile modulus of elasticity of wound glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 7: Determination of extension to failure of unreinforced resins | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 8: Determination of long-term ring stiffness of glass filament reinforced plastics pipes | |
| Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 9: Determination of pressure regression characteristics as a function of time for glass filament reinforced plastics pipes | |
| Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin, Part 1: Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) | |
| Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin, Part 2: Pressure and non-pressure water supply (ISO 10639:2004, MOD) | |
| Pleasure boats - Toilet waste collection, holding and transfer systems | |
| Printed board assemblies - Acceptability of solder, printed boards and soldered joints - Pictorial representation | |
| Printed board assemblies - Cleanliness requirements and guidance | |
| Printed board assemblies - Preparation, handling and assembly | |
| Printed board assemblies - Surface mount land patterns | |
| Printed board assemblies - Surface mount technology | |
| Production typing tests | |
| PULLER - IMPACT - UNIVERSAL | |
| RECEPTACLES, ELECTRIC, AIRCRAFT STORAGE BATTERY | |
| Reference gases - Preparation and certification of gravimetric Standards | |
| Reference gases - Preparation of gravimetric standards | |
| Reference gases - Preparation, analysis and certification of traceable reference gas mixtures | |
| RING, RETAINING - INTERNAL, SPIRAL WOUND HEAVY AND MEDIUM DUTY, UNS S66286 | |
| Safety in forestry (known as the SAA Forest Safety Code) | |
| Screw, Drive, Round Head, Type U AMS 5504 (UNS S41000) | |
| SCREW, DRIVE, ROUND HEAD, TYPE U AMS5504 (UNS S41000) | |
| Screws - Self-drilling - For the building and construction industries | |
| Self-drilling screws for the building and construction industries - Corrosion resistance requirements | |
| Self-drilling screws for the building and construction industries, Part 1: General requirements and mechanical properties | |
| Single-use breath alcohol testing devices | |
| Siting of radiocommunications facilities - Fixed location satellite earth stations | |
| Siting of radiocommunications facilities - Guidelines for fixed, mobile and broadcasting services operating at frequencies above 30 MHz | |
| Siting of radiocommunications facilities - LF, MF and HF transmitting and HF receiving facilities | |
| Sleeve, Removable Self-Locking Nut, UNS S30403 | |
| Small pleasure boats - Waste water retention and treatment - Toilet retention systems | |
| Software quality management system | |
| Software quality management systems - Implementation guide | |
| Software quality management systems - Requirements | |
| Solid and segmental circular saws for cold cutting metals - Interchangeability dimensions of the drive - Saw diameter range 224 mm to 2240 mm | |
| Solvents - Mineral turpentine and white spirit | |
| Solvents - Toluene | |
| Spacer, Sleeve - for .190 Inch Bolt, AMS4901 or AMS4921 | |
| Spacer, Sleeve - for .250 Inch Bolt, AMS4901 or AMS4921 | |
| SPACER, SLEEVE \x96 FOR .190 INCH BOLT, AMS4901 OR AMS4921 | |
| SPACER, SLEEVE \x96 FOR .250 INCH BOLT, AMS4901 OR AMS4921 | |
| Specification for general purpose corrugated fibreboard boxes and blanks | |
| Speed fluctuations in analogue sound recording and reproducing equipment - Method of measurement | |
| Stainless steel non-pressure pipes and fittings | |
| Steel cylinders for compressed gases - Welded - 150 kg to 500 kg | |
| Steel wire ropes | |
| STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 KSI/1200 \xb0F LIGHTWEIGHT, SELF-BROACHING KEYS | |
| Stud, Locked in, Key Locked, UNS S66286, 140 ksi/1200 Degrees F, Heavy-Duty, Self-Broaching Keys | |
| Stud, Locked in, Key Locked, UNS S66286, 140 ksi/1200 Degrees F, Lightweight, Self-Broaching Keys | |
| STUD-STEPPED, 1.5 DIA ENGAGEMENT, .375-16 UNJC-3A MOD X .3125-24 UNJF-3A (UNS S66286) | |
| Synthetic sporting surfaces - General principles | |
| Test methods for determining electrolytic corrosion with insulating materials | |
| Textiles - Cloth, duck - Cotton and polyester/cotton | |
| Textiles - Mops - Wet | |
| Textiles - Tarpaulins | |
| Timber - Machine proof-grading | |
| TOOL, CONNECTOR ASSEMBLY; FOR MIL-C-5015 CONNECTORS | |
| Urine - Determination of total arsenic - Furnace atomic absorption spectrometric method | |
| Use of standard Ringelmann and Australian Standard miniature smoke charts | |
| WASHER, FLAT, COUNTERSUNK UNS S66286 | |
| Waters - Determination of filtrable synthetic anionic surfactants - Copper-ethylenediami ne flame atomic absorption spectrometric method | |
| Waters - Determination of gross alpha and gross beta activities | |
| Waters, Part 2: Determination of carbon dioxide - Alkalimetric titration method | |
| Waters, Part 3: Determination of alkalinity - Acidimetric titration method | |
| Waters, Part 4: Determination of solids - Gravimetric method | |
| Waters, Part 6: Determination of filtrable calcium - Flame atomic absorption spectrometric method | |
| Waters, Part 7: The construction and use of the Secchi disc | |
| Welding positions | |
| Whole blood - Determination of cadmium - Furnace atomic absorption spectrometric method | |
| Wool - Method for the measurement of average yellowness of greasy wool | |
| Wool - Method for the measurement of resistance to compression | |
| WRENCH - PROPELLER SHAFT (SHAFT SIZES NO. 10-20-30) | |
| WRENCH - PROPELLER SHAFT (SHAFT SIZES NO. 40-50-60) |
| << Prev | Next >> |