Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1330
1340
1350
1360
1370
1380
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1410
1420
1430
1440
1450
1460
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| ACETYLENE PLANT SAFE OPERATING PRESSURES AND TEMPERATURES | |
| Active Safety and the Mobility Industry | |
| ADAPTER - PARACHUTE HARNESS STRAP | |
| Adapter, Parachute Harness Strap | |
| Adapter, Parachute Harness with Tensioner and Spring | |
| ADAPTER, PARACHUTE HARNESS, WITH TENSIONER AND SPRING | |
| Adapter, Quick Fit Parachute Harness | |
| ADAPTER, QUICK FIT, PARACHUTE HARNESS | |
| Adapter, Reversible, Quick Fit, 500 lb; 1 3/4 Inch | |
| ADAPTER, REVERSIBLE, QUICK FIT, 500 LB; 1-3/4 INCH | |
| ADAPTIVE CRUISE CONTROL | |
| ADVANCES IN SIDE AIRBAG SYSTEMS | |
| AERIAL STORAGE OF COMPRESSED HYDROGEN | |
| Airgap Units for Water Conditioning Equipment Installation | |
| Alkyd Coating System Materials Specification, Performance-Based | |
| ALTERNATIVE DIESEL FUELS | |
| Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based Type I, for Use Over Blast Cleaned Steel Type II, for Use Over Hand Cleaned Steel | |
| APPLYING CODES AND STANDARDS FOR HYDROGEN STORAGE, USE AND DISPENSING SYSTEMS | |
| APPROPRIATE AND EFFECTIVE REGULATIONS FOR MEDICAL GASES WITHIN 21 CFR PARTS 201, 205, AND 210/211 | |
| Automotive Electronics Reliability, Volume 2 | |
| AUTOMOTIVE MICROCONTROLLERS, VOLUME 2 | |
| Autonomous Vehicles for Safer Driving | |
| Band, Spring, Parachute Pack Opening | |
| BATH AND SINK DRAIN STRAINERS | |
| Bathwaste and Overflow Assemblies with Tub Filler Spout | |
| Black Plastic PVC or PE Pressure-Sensitive Corrosion Preventative Tape | |
| BULK TRANSPORT VESSELS FOR THE DELIVERY OF FOOD GASES | |
| CGA Position Statement on Odor Testing for Residual Cylinder Contaminants | |
| CGA Position Statement on the Protection of Cryogenic Storage Tanks from Overpressure During Operator-Attended Refill | |
| CGA Position Statement on the Use of Copper in Acetylene Service | |
| Chevrolet Volt Development Story of the Pioneering Electrified Vehicle | |
| CLARIFICATION OF EXISTING HYDROGEN SETBACK DISTANCES AND DEVELOPMENT OF NEW HYDROGEN SETBACK DISTANCES IN NFPA 55 | |
| CLARIFIERS | |
| CLEANLINESS FOR PROTON EXCHANGE MEMBRANES HYDROGEN PIPING/COMPONENTS | |
| Clevis, Riser, Air Delivery Type III | |
| CLEVIS, RISER, AIR DELIVERY-TYPE III | |
| Clevis, Tie down, Air Delivery Type II | |
| Clevis, Tiedown, Air Delivery Type II | |
| Clevises, Suspension, Air Delivery-Type 1 | |
| Clevisses, Suspension, Air Delivery-Type 1 | |
| Cold-Applied Asphalt Mastic Painting System with Extra-Thick Film | |
| Commentary on Painting Systems | |
| Concepts in Turbocharging for Improved Efficiency and Emissions Reduction | |
| Cone, Releasing, Parachute Pack | |
| Cone-Releasing, Parachute Pack | |
| Connectivity and the Mobility Industry | |
| CONTINUOUSLY VARIABLE TRANSMISSION (CVT) | |
| CRASH RECONSTRUCTION RESEARCH: 20 YEARS OF PROGRESS (1988-2007) | |
| CRUDE OIL AS A BURNER FUEL | |
| DELIVERY OF CRYOGENIC OR REFRIGERATED LIQUIDS USING CONNECTED TRANSFER HOSES | |
| DESIGN OF RACING AND HIGH-PERFORMANCE ENGINES 1998-2003 | |
| Design of Racing and High-Performance Engines 2004-2013 | |
| DESIGN REGISTRATION REQUIREMENTS FOR VACUUM-JACKETED PRESSURE VESSEL PIPING | |
| DESIGNATED MEDICAL GASES ARE NOT ACTIVE PHARMACEUTICAL INGREDIENTS | |
| Developments in Modern Racecar Driver Crash Protection and Safety-Engineering Beyond Performance | |
| Dielectric Fittings | |
| DIESEL EXHAUST AFTERTREATMENT 2000-2007 | |
| DIESEL PARTICULATE FILTER TECHNOLOGY | |
| Digital Imaging and Communications in Medicine (DICOM) Part 10: Media Storage and File Format for Media Interchange | |
| Digital Imaging and Communications in Medicine (DICOM) Part 11: Media Storage Application Profiles | |
| Digital Imaging and Communications in Medicine (DICOM) Part 12: Media Formats and Physical Media for Media Interchange | |
| Digital Imaging and Communications in Medicine (DICOM) Part 13: Print Management Point-to-Point Communication Support | |
| Digital Imaging and Communications in Medicine (DICOM) Part 14: Grayscale Standard Display Function | |
| Digital Imaging and Communications in Medicine (DICOM) Part 15: Security Profiles | |
| Digital Imaging and Communications in Medicine (DICOM) Part 16: Content Mapping Resource | |
| Digital Imaging and Communications in Medicine (DICOM) Part 17: Explanatory Information | |
| Digital Imaging and Communications in Medicine (DICOM) Part 18: Web Access to DICOM Persistent Objects (WADO) | |
| Digital Imaging and Communications in Medicine (DICOM) Part 1: Introduction and Overview | |
| Digital Imaging and Communications in Medicine (DICOM) Part 2: Conformance | |
| Digital Imaging and Communications in Medicine (DICOM) Part 3: Information Object Definitions | |
| Digital Imaging and Communications in Medicine (DICOM) Part 4: Service Class Specifications | |
| Digital Imaging and Communications in Medicine (DICOM) Part 5: Data Structures and Encoding | |
| Digital Imaging and Communications in Medicine (DICOM) Part 6: Data Dictionary | |
| Digital Imaging and Communications in Medicine (DICOM) Part 7: Message Exchange | |
| Digital Imaging and Communications in Medicine (DICOM) Part 8: Network Communication Support for Message Exchange | |
| Digital Imaging and Communications in Medicine (DICOM) Part 9: Point to Point Communication Support for Message Exchange | |
| Digital Imaging and Communications in Medicine (DICOM) | |
| Dishwasher Drain Airgaps | |
| DISMANTLING AND DISPOSING OF STEEL FROM TANKS WHICH HAVE CONTAINED LEADED GASOLINE | |
| DIVERTER AND SHUT-OFF VALVES FOR POOL/SPAS | |
| ELASTOMERIC TEST CAPS/CLEANOUT CAPS | |
| ELECTRONIC BRAKING, TRACTION, AND STABILITY CONTROLS VOLUME 2 | |
| Electronic Data Entry Sheet for Inherently Safer Design Guide | |
| Electronic Engine Control Technologies | |
| Encasement Sleeves for Potable Water Pipe and Tubing | |
| Engine Design Concepts for World Championship Grand Prix Motorcycles | |
| FACTORS FOR DETERMINING PRESSURE LIMITATIONS FOR VARIOUS EQUIPMENT TYPES | |
| Fastener, Parachute Pack | |
| FDA ESTABLISHMENT REGISTRATION AND LISTING FOR MIXTURES OF DESIGNATED MEDICAL GASES | |
| FILLING AND DISTRIBUTING EMERGENCY OXYGEN CYLINDERS WITHOUT A PRESCRIPTION | |
| FLUSH VALVES WITH DUAL FLUSH DEVICE FOR WATER CLOSETS OR WATER CLOSET TANK WITH AN INTEGRAL FLUSH VALVES WITH A DUAL FLUSH DEVICE | |
| FOOD GASES AND GENETICALLY MODIFIED ORGANISMS | |
| Four-Coat Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres) | |
| Four-Coat White or Colored Vinyl Painting System (for Fresh Water, Chemical, and Corrosive Atmospheres) | |
| FRACTURING OIL OR GAS WELLS WITH FLAMMABLE FLUIDS | |
| FUELING FIXED, PORTABLE, AND SELF-PROPELLED ENGINE-DRIVEN EQUIPMENT | |
| Green Technologies and The Mobility Industry | |
| Grip, Parachute Rip Cord, Cloverleaf | |
| GROOVED MECHANICAL PIPE COUPLINGS AND GROOVED END FITTINGS | |
| GROOVED MECHANICAL PIPE COUPLINGS AND GROOVED FITTINGS | |
| Guide for Protective Screening of Overpass Structures | |
| Guide for Selecting Alkyd Painting Systems | |
| Guide for Selecting Chlorinated Rubber Painting Systems | |
| Guide for Selecting Oil Base Painting Systems | |
| Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems | |
| Guide for Selecting One-Coat Shop Painting Systems | |
| Guide for Selecting Painting Systems for Boottoppings | |
| Guide for Selecting Painting Systems for Ship Bottoms | |
| Guide for Selecting Painting Systems for Topsides | |
| Guide for Selecting Urethane Painting Systems | |
| Guide for Selecting Vinyl Painting Systems | |
| GUIDE FOR THE SAFE STORAGE AND LOADING OF HEAVY OIL AND ASPHALT | |
| Guide to Topcoating Zinc-Rich Primers | |
| Guide to Zinc-Rich Coating Systems | |
| HANDLING CARBON DIOXIDE CYLINDERS PREVIOUSLY USED IN CANNABIS EXTRACTION OR WITH FOOD PRODUCTS CONTAINING CANNABIS | |
| Head Injury Biomechanics Volume 3 Mitigation | |
| Head Injury Biomechanics Volume I \x96 The Skull | |
| Head Injury Biomechanics, Volume II \x96 The Brain | |
| HEAT EXCHANGERS AND INDIRECT WATER HEATERS | |
| Hook, Band, Parachute, Container Opening | |
| HOUSING, PARACHUTE RIPCORD | |
| Housing, Parachute, Ripcord | |
| Human Subject Crash Testing: Innovations and Advances | |
| IDENTIFICATION AND HANDLING OF SPUN DOT/TC/ISO/UN CYLINDERS | |
| IDENTIFICATION OF COMPRESSED GASES IN CYLINDERS | |
| IGNITION RISKS OF ORDINARY FLASHLIGHTS | |
| Ignition Risks of Ordinary Telephones | |
| Inherently Safer Design Guide | |
| INSULATED PROTECTORS FOR P-TRAPS, SUPPLY STOPS, AND RISERS | |
| Integrated Vehicle Health Management: Essential Reading | |
| INTERNAL INSPECTION OF STATIONARY VACUUM-JACKETED STORAGE TANKS FOR CRYOGENIC AND REFRIGERATED LIQUIDS | |
| Kinetic Energy Recovery Systems for Racing Cars | |
| KNIFE, RELEASE, CARGO PLATFORM | |
| Latex Painting System for Industrial and Marine Atmospheres, Performance-Based | |
| Lead Free Sealing Compounds for Threaded Joints | |
| Lead-Free Sealing Compounds for Threaded Joints | |
| LINK - CONNECTOR HARNESS AND PACK | |
| Link Assembly-Connector, Separable, Parachute | |
| Link Connector Harness and Pack | |
| Link, Assembly-Connector, Seperable, Parachute | |
| LINK, CONNECTING, QUICK RELEASE | |
| Link, Connector Quick Release | |
| Link, Connector, Parachute, Seperable, Heavy Duty, Assembly of | |
| LINK, PARACHUTE CONNECTOR | |
| Link, Snap, Qucik Release 1 3/4 Inch | |
| LINK, SNAP, QUICK RELEASE 1 3/4 INCH | |
| LIQUEFIED HYDROGEN SUPPLY SYSTEM SEPARATION DISTANCES | |
| Lumbar Injury Biomechanics | |
| MAINTENANCE AND SAFETY DEVICES ON ACETYLENE COMPRESSOR CRANKCASES WITHOUT SEPARATION SECTIONS | |
| MARKING OF DOT MONOLITHIC COMPRESSED GAS CYLINDERS | |
| MARKINGS REQUIRED TO BE READILY VISIBLE ON CYLINDERS AND TUBES | |
| MEDICAL GAS REGULATORS, VALVE INTEGRATED PRESSURE REGULATORS, AND FLOWMETERS MAINTENANCE | |
| MEDICAL GASES AND THE POTENTIAL TO CONTAIN NITROSAMINE | |
| METALLIC AND PLASTIC UTILITY BOXES | |
| MITIGATING FOOD FRAUD RISK IN FOOD GASES | |
| MOVEMENT OF CYLINDERS BY HAND | |
| Multiport Electronic Trap Primers | |
| NITROGEN SUPPLY FOR USE IN CRYOSAUNAS | |
| Non-ASME Certified Pressure Relief Valves Used for Thermal Expansion Relief in Certain Piping Systems | |
| OBJECTION DETECTION, COLLISION WARNING, AND AVOIDANCE SYSTEMS, VOLUME 2 | |
| OCCUPANT AND VEHICLE RESPONSES IN ROLLOVERS | |
| PEDESTRIAN SAFETY | |
| Peroidic Proof Testing of Stationary Cryongenic Liquid, Vaccum-Jacketed Tanks | |
| Pin, Parachute Rip Cord, Locking | |
| Pin, Parachute Ripcord, Locking | |
| Pipe and Tubing Alignment and Secondary Support Systems with or without Pipe and Tubing Safety or Protection | |
| Pipe Support Hangers and Hooks | |
| PLASTIC AND METALLIC EXPANSION JOINTS | |
| PLASTIC LEACHING CHAMBERS | |
| Policy Statement - Back-Up Protection Grading Across National Grid Transco/Distribution Network Operator Interfaces | |
| Policy Statements - Alternative Use of Overhead Line Towers | |
| Policy Statements - Application and Migration of Communication Protocol From GI74 to IEC60870-5-100 Between Substation Control Systems (SCS) and The Integrated Energy Management Systems (IEMS) | |
| Policy Statements - Application and Protection Setting Policy for the National Grid UK Transmission System | |
| Policy Statements - Application of Surge Protection to Substations and Cable Sealing End Compounds | |
| Policy Statements - Asset Health - Condition Monitoring Systems | |
| Policy Statements - Asset Management Policy for UK Electricity Transmission | |
| Policy Statements - Cable System Decommissioning | |
| Policy Statements - Design & Operation of Combined Disconnector-Earthin g Switches | |
| Policy Statements - Low Voltage Alternating Current (LVAC) Auxiliary Supplies for Transmission Substations | |
| Policy Statements - National Grid Protection Application and Setting at Railway Supply Points | |
| Policy Statements - Oil Policy | |
| Policy Statements - Overhead Line Separation From Wind Turbines | |
| Policy Statements - Prevention of Unauthorised Access to Steel Lattice Overhead Line Supports | |
| Policy Statements - Prevention of Unauthorised Access to Vulnerable Cable Crossings and Supporting Structures | |
| Policy Statements - Specification and Standard Ratings for Transformers, Reactors and Quadrature Boosters | |
| Policy Statements - Substation Primary Insulation (AIR/SF6) | |
| Policy Statements - System Development \x96 Client & Designer Competency Construction (Design & Management) Regulations 2007 | |
| Policy Statements - Use of L3 Towers | |
| POSITION STATEMENT - CARBON MONOXIDE MIXTURES IN CARBON STEEL CYLINDERS | |
| POSITION STATEMENT - UPDATED REQUIREMENTS FOR MEDICAL OXYGEN AND MEDICAL AIR CYLINDER LABELS | |
| POSTION STATEMENT - CGA POSITION STATEMENT ON THE SAFE TRANSPORTATION OF CYLINDERS IN PASSENGER VEHICLES | |
| PRECAUTIONS WHILE WORKING IN REACTORS HAVING AN INERT ATMOSPHERE | |
| Pregnant Occupant Biomechanics - Advances in Automobile Safety Research | |
| PREPARING TANK BOTTOMS FOR HOT WORK | |
| PRESSURE REGULATORS, CYLINDER VALVES, AND CYLINDERS WITH VALVES AS MEDICAL DEVICES | |
| Procedural Standards for Fume Hood Performance Testing | |
| Procedural Standards for Retro-Commissioning of Existing Buildings | |
| PROHIBITION ON REFILLING SINGLE-USE CYLINDERS AND CONTAINERS | |
| Provisional Consumer Safety Specification for Toddler Beds | |
| Provisional Guide for Prevention and Control of Lead-Based Paint Hazards in Rental Housing | |
| Provisional Guide for Selecting Surface Geophysical Methods | |
| Provisional Practice for Personal Sampling and Analysis of Endotoxin in Metal Removal Fluid Aerosols in Workplace Atmospheres | |
| Provisional Safety Specification for Bean Bag Chairs | |
| Provisional Safety Specification for Drawstrings on Children's Upper Outerwear | |
| Provisional Specification for Fire Safety for Candles | |
| Provisional Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases | |
| Provisional Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs | |
| Provisional Standard Guide for Development and Implementation of a Source Reduction Program | |
| Provisional Standard Guide for Identification and Management of Lead Hazards in Facilities | |
| Provisional Standard Guide for Safer Use of Movable Soccer Goals | |
| Provisional Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings | |
| Provisional Standard Guide for Use of Coal Combustion Fly Ash in Structural Fills | |
| Provisional Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation | |
| Provisional Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use | |
| Provisional Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use | |
| Provisional Standard Performance Requirements for Plastic Chaise Lounges, with or without Moving Arms, with Adjustable Backs, for Outdoor Use | |
| Provisional Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel | |
| Provisional Standard Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination | |
| Provisional Standard Practice for Conducting Environmental Baseline Surveys | |
| Provisional Standard Practice for Establishing Secured Creditor Exemption under CERCLA | |
| Provisional Standard Practice for Evaluating Quality Systems of Organizations Engaged in Conducting Facility and Hazard Assessments to Determine the Presence and Extent of Lead in Paint, Dust, Airborne Particulate, and... | |
| Provisional Standard Practice for Sampling Freshly Mixed Controlled Low Strength Material | |
| Provisional Standard Practice for Sampling Plans and Tables for Inspection by Attributes | |
| Provisional Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electoanalysis | |
| Provisional Standard Safety and Performance Specification for Soccer Goals | |
| Provisional Standard Safety Guide for Consumer Recreational Use of Fun-Karts | |
| Provisional Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content | |
| Provisional Standard Specification for Determination of Accessibility of Surface Systems under and Around Playground Equipment | |
| Provisional Standard Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures | |
| Provisional Standard Specification for Fabricated Shapes and Finished Parts Fabricated from Polyimide Resins | |
| Provisional Standard Specification for Iodotrifluoromethane , CF3I | |
| Provisional Standard Specification for Molded and Cast Nylon (PA) Rods, Tubes, Sheets, and Parts | |
| Provisional Standard Specification for Molded Polyethylene Shipping and Storage Drums | |
| Provisional Standard Specification for Portable Gasoline and Kerosine Spill Resistant Fueling Systems for Consumer Use | |
| Provisional Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers | |
| Provisional Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings | |
| Provisional Standard Specification for Safety and Performance of Fun-Karts | |
| Provisional Standard Specification for Shelter, Electrical, Equipment S-250/G | |
| Provisional Standard Specification for Shelter, Electrical, Equipment S-280/G | |
| Provisional Standard Specification for Shelter, Tactical, Expandable, One-Side | |
| Provisional Standard Specification for Shelter, Tactical, Expandable, Two-Side | |
| Provisional Standard Test Method for Ball Drop on Controlled Low Strength Material to Determine Suitability for Load Application | |
| Provisional Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography | |
| Provisional Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electric Insulation Varnishes | |
| Provisional Standard Test Method for Determining Arc Thermal Performance (Value) of Textile Materials for Clothing by Electric Arc Exposure Method Using Instrumented Sensor Panels | |
| Provisional Standard Test Method for Determining Ignitability of Clothing by Electric Arc Exposure Method Using a Mannequin | |
| Provisional Standard Test Method for Flow Consistency of Controlled Low Strength Material | |
| Provisional Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves | |
| Provisional Standard Test Method for Length Change of Mortar Bars Caused by Reaction between Hydraulic Cement and Alkali-Reactive Aggregate | |
| Provisional Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres | |
| Provisional Standard Test Method for Screening, Quantification, and Characterization of Total Polychlorinated Biphenyls by Room Temperature Phosphorescence | |
| Provisional Standard Test Method for Static and Dynamic Spinal Implants Assembly in a Corpectomy Model | |
| Provisional Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway | |
| Provisional Standard Test Method for Tires, Pneumatic, Vehicular, Highway | |
| Provisional Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Controlled Low Strength Material | |
| Provisional Standard Test Methods for Oil and Grease (Solvent Extractable Substances) by Gravimetric Determination | |
| Provisional Standard Test Methods for Oil and Grease (Solvent Extractable Substances) in Water by Gravimetric Determination | |
| Provisional Standard Test Methods for Sealability of Gasket Materials | |
| Provisional Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners | |
| Provisional Test Methods for Asphalt Content of Hot Mix Asphalt by the Ignition Method | |
| Provisional Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures | |
| PSM RMP Guidelines & Templates | |
| Psoriasis | |
| Psychological Aspects of Crisis Negotiation | |
| Pump System Optimization: A Guide for Improved Energy Efficiency, Reliability, and Profitability | |
| Pump Systems Assessment Professional (PSAP) Certification Study Guide | |
| Pump Systems Assessment: Body of Knowledge | |
| PUMP/DOSE, SUMPS AND SEWAGE EJECTOR TANKS WITH OR WITHOUT A PUMP | |
| Rainwater Diverter Valves for Non-Roofed Area Slabs | |
| REGISTRATION OF FACILITIES FILLING OPEN TOPPED MEDICAL LIQUID NITROGEN DEWARS FOR DEVICE USE IN THE UNITED STATES | |
| Release Notes for DICOM PS 3 - 2003 | |
| REPAIRS TO CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCTS PIPELINES | |
| REQUIREMENTS FOR INSTALLERS OF BULK MEDICAL GAS SUPPLY SYSTEMS | |
| Retainer - Snap Parachute Lanyard | |
| RETAINER-SNAP PARACHUTE LANYARD | |
| RING "V", QUICK FIT, PARACHUTE HARNESS | |
| RING - PARACHUTE HARNESS "D" | |
| Ring, "V", Quick Fit,Parachute Harness | |
| RING, "V"-QUICK FIT, PARACHUTE HARNESS | |
| Ring, Parachute Harness "D" | |
| RING, PARACHUTE HARNESS ACCESSORY ATTACHING | |
| RING, PARACHUTE HARNESS, QUICK-FIT, "V" TYPE | |
| Ring, Reefing, Parachute | |
| RING-PARACHUTE HARNESS "V" | |
| Ring-Reefing Parachute | |
| Roof Pipe Flashings | |
| ROOFS OVER HYDROGEN STORAGE SYSTEMS | |
| SAFETY-CRITICAL AUTOMOTIVE SYSTEMS | |
| Sales of Natural Gas Liquids & Liquified Gases | |
| SCOURING BRICK AND HOLDER | |
| SCOURING POWDER (GLASS CLEANING) | |
| SCOURING POWDER | |
| Securing Compressed Gas Cylinders at Gas Manfacturers' and Distributors' Facilities and Users' Sites | |
| SELECTION OF PRESSURE RELIEF DEVICES FOR TUBES | |
| SENSORS AND TRANSDUCERS | |
| SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER | |
| SNAP ASSEMBLY, PARACHUTE STATIC LINE | |
| Snap Assembly-Parachute Chest Type Pack Connector | |
| SNAP HOOK COILED-SPRING, PARACHUTE | |
| Snap Hook, Parachute Lanyard | |
| Snap Hook, Quick Release | |
| SNAP, CONNECTOR-PARACHUTE CHEST TYPE PACK | |
| SOAP AND SOAP PRODUCTS: GENERAL SPECIFICATIONS (METHODS FOR SAMPLING AND TESTING) | |
| Soap and Soap-Products (Including Synthetic Detergents); Methods for Sampling and Testing | |
| SOAP, ANTIMICROBIAL | |
| SOAP, BORAX (POWDERED) | |
| SOAP, BUILT, HIGH-TITER, POWDERED | |
| SOAP, FLOOR, LIQUID AND PASTE | |
| SOAP, GRIT (CAKE) | |
| SOAP, GRIT (PASTE WITH MINERAL SCRUBBER AND POWDER WITH VEGETABLE SCRUBBER) | |
| SOAP, LAUNDRY (CHIP, ROSIN-TYPE) | |
| SOAP, LAUNDRY (POWDERED) | |
| SOAP, LAUNDRY, BAR | |
| Soap, Laundry, Built, Low-Titer, Powdered | |
| SOAP, LAUNDRY, CHIP AND POWDERED | |
| SOAP, LAUNDRY, LOW-TITER (FOR LOW-TEMPERATURE WASHING) | |
| SOAP, LAUNDRY, ORDINARY, BAR | |
| SOAP, SADDLE (LEATHER GOODS) | |
| SOAP, SCOURING (CAKE FORM) AND SOAP, SCRUBBING, ALKALINE (POWDER FORM) | |
| SOAP, TOILET (CAKE AND POWDERED) | |
| SOAP, TOILET (FOR SOFT AND HARD WATER USE) | |
| SOAP, TOILET (LIQUID AND PASTE) | |
| SOAP; CHIP | |
| SODIUM CARBONATE - SODIUM BICARBONATE MIXTURE | |
| SODIUM HYDROXIDE, TECHNICAL, FOR CLEANING PURPOSES | |
| SODIUM ORTHOSILICATE, TECHNICAL | |
| Software-Hardware Integration in Automotive Product Development | |
| SOLVENT, DRY-CLEANING | |
| SOUR, LAUNDRY (FLUORIDATED) | |
| SPARK IGNITION PROPERTIES OF HAND TOOLS | |
| Spring, Band Parachute, Container Opening | |
| STAIN REMOVER, TABLEWARE, OXYGEN RELEASING TYPE | |
| Standard Practice for Application of Class PB Exterior Insulation and Finish Systems | |
| Standard Provisional Guide for Expedited Site Characterization of Hazardous Waste Containment Sites | |
| Standard Provisional Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices | |
| Standard Provisional Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead | |
| Standard Provisional Test Method for Evaluting the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) | |
| Standard Provisional Test Methods for Determination of Trace Elements in Coal, Coke and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass... | |
| STRATEGIC PLAN ON FOOD GAS MONOGRAPHS | |
| SUITABILITY OF CARBON STEEL CONTAINERS FOR STATIONARY CARBON DIOXIDE STORAGE | |
| SUMITOMO PRECISION PRODUCTS FABRICATED BRAZED ALUMINUM HEAT EXCHANGERS | |
| TEST KIT (DETERGENT CONCENTRATION AND WATER HARDNESS) | |
| TESTING FOR AMMONIA IN CARBON DIOXIDE | |
| THE USE OF CARBON FIBER, FULLY WRAPPED COMPOSITE STORAGE VESSELS PERMANENTLY INSTALLED IN STATIONARY GASEOUS HYDROGEN FUELING SYSTEMS | |
| Three-Coat Moisture-Cured Polyurethane Coating System, Performance-Based | |
| TRANSPORT OF COMPRESSED GAS CYLINDERS AND CRYOGENIC LIQUID CONTAINERS IN ELEVATORS | |
| Trap Primers for Fill Valves and Flushometer Valves | |
| Two-Coat Zinc-Rich Polyurethane Primer/Aliphatic Polyurea Topcoat System, Performance-Based | |
| USE OF CONCENTRATION RANGES ON SAFETY DATA SHEETS | |
| USE OF EXCESS FLOW CONTROL | |
| USE OF LPG OR PROPANE TANKS AS COMPRESSED HYDROGEN STORAGE BUFFERS | |
| USE OF MAGNETIC CYLINDER CARTS | |
| USE OF NONSPARKING TOOLS | |
| USE OF RAILROAD TANK CARS FOR STATIONARY LIQUID CARBON DIOXIDE STORAGE | |
| USE OF TAPERED AND PARALLEL (STRAIGHT) THREADS IN ALUMINUM ALLOY CYLINDERS | |
| V-Ring Parachute Extraction Bag Aerial Delivery | |
| V-RING, PARACHUTE EXTRACTION BAG, AERIAL DELIVERY | |
| V2V/V2I Communications for Improved Road Safety and Efficiency | |
| Valves with Atmospheric Vacuum Breakers | |
| Wastewater Diverter/Bypass Valves and Diversion Systems | |
| WELDING OR HOT TAPPING ON EQUIPMENT CONTAINING FLAMMABLES | |
| X-BY WIRE AUTOMOTIVE SYSTEMS |
| << Prev | Next >> |