Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1320
1330
1340
1350
1360
1370
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1390
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| Active assisted living (AAL) use cases | |
| Application guidelines \x97 Technical and financial processes for implementing asset management systems | |
| Application integration at electric utilities. System interfaces for distribution management. MultiSpeak. CIM harmonization | |
| Arrangements for the recognition and acceptance of conformity assessment results | |
| Assessment of power quality \x97 Characteristics of electricity supplied by public networks | |
| Attenuation Uniformity in Optical Fibres | |
| Audio archive system Part 2: Audio data preservation | |
| Basic qualification of DC-link film capacitors for automotive use \x97 General requirements, test conditions and tests | |
| C-Si photovoltaic (PV) modules - Light and elevated temperature induced degradation (LETID) test - Detection | |
| Calibration of space charge measuring equipment based on pulsed electroacoustic (PEA) measurement principle | |
| Calibration of wavelength/optical frequency measurement instruments Part 3: Optical frequency meters using optical frequency combs | |
| Car multimedia systems and equipment \x96 Drive monitoring system Part 1: General | |
| Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV Part 4-2: Cables for DC charging according to mode 4 of IEC 61851-1 - Cables intended... | |
| Cloud computing \x97 Multi-cloud management Part 1: Overview and use cases | |
| Commissioning of VSC HVDC systems | |
| Comparative testing of consumer products and related services \x97 General principles | |
| Conductors for overhead lines - Fiber reinforced composite core used as supporting member material Part 1: Polymeric matrix composite cores | |
| Conductors for overhead lines \x97 Fiber reinforced composite core used as supporting member material Part 2: Metallic matrix composite cores | |
| Conformity assessment \x97 Example of a certification scheme for tangible products | |
| Conformity assessment \x97 Guidelines and examples of a certification scheme for services | |
| Conformity assessment \x97 Guidelines and examples of a scheme for the certification of processes | |
| Conformity assessment Fundamentals of product certification | |
| Conformity assessment Guidance on a third-party certification system for products | |
| Conformity assessment Guidance on the use of an organization\x92s quality management system in product certification | |
| Cybersecurity aspects of devices used for power metering and monitoring, power quality monitoring, data collection and analysis | |
| DC power supply for notebook computers | |
| DC voltages for HVDC grids | |
| Demand-side power quality management | |
| Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines | |
| Design of earth electrode stations for high-voltage direct current (HVDC) links \x97 General guidelines | |
| Device embedded substrate Part 2-1: Guidelines \x97 General description of technology | |
| Device embedded substrate Part 2-3: Guidelines \x97 Design guide | |
| Device embedded substrate Part 2-4: Guidelines \x97 Test element groups (TEG) | |
| Device embedding assembly technology Part 2-10: Design specification for cavity substrate | |
| Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices Part 1: 2,6 kW system | |
| Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices Part 2: 5,2 kW system | |
| Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices Part 3: AC/DC appliance inlet | |
| Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices Part 1: Plug and socket-outlet system for 2,6 kW... | |
| Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices Part 2: Plug and socket-outlet system for 5,2 kW... | |
| Distributed energy resources connection with the grid Part 1: General requirements | |
| Distributed energy resources connection with the grid Part 3: Additional requirements for stationary battery energy storage system | |
| Distributed energy resources connection with the grid Part 41: Requirements for frequency measurement used to control distributed energy resources (DER) and loads | |
| Distributed energy resources connection with the grid | |
| Electric dishwashers for household use - Methods for measuring the microbiological efficacy of the dishwashing process | |
| Electric Energy Storage (EES) Systems Part 2-3: Unit parameters and testing methods \x97 Performance assessment test during site operation | |
| Electric toasters for household and similar use \x97 Methods and measurements for improving accessibility | |
| Electric vehicle battery swap system Part 1: General and guidance | |
| Electric vehicle wireless power transfer (WPT) systems Part 2: Specific requirements for communication between electric road vehicle (EV) and infrastructure | |
| Electric vehicle wireless power transfer (WPT) systems Part 3: Specific requirements for the magnetic field wireless power transfer systems | |
| Electrical energy storage (EES) systems Part 2-2: Unit parameters and testing methods \x97 Application and performance testing | |
| Electrical energy storage (EES) systems Part 3-1: Planning and performance assessment of electrical energy storage systems \x97 General specification | |
| Electrical energy storage (EES) systems Part 3-2: Planning and performance assessment of electrical energy storage systems \x97 Additional requirements for power intensive and renewable energy sources integration related applications | |
| Electrical energy storage (EES) systems Part 3-3: Planning and performance assessment of electrical energy storage systems - Additional requirements for energy intensive and backup power applications | |
| Electrical energy storage (EES) systems Part 4-1: Guidance on environmental issues - General specification | |
| Electrical insulation systems (EIS) \x97 Thermal evaluation of combined liquid and solid components Part 2: Simplified test | |
| Electrical insulation systems (EIS) \x97 Thermal evaluation of combined liquid and solid components Part 3: Hermetic motor-compressors | |
| Electrically propelled road vehicles - Dimensions and designation of secondary lithium-ion cells | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite Part 9-1: Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS) | |
| Electricity metering data exchange \x97 The DLMS/COSEM suite \x97 Part 6-9: Mapping between the Common Information Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols | |
| Electricity metering data exchange \x97 The DLMS/COSEM Suite Part 1-1: Template for DLMS/COSEM communication profile standards | |
| Electricity metering data exchange \x97 The DLMS/COSEM suite Part 8-20: Mesh communication profile for neighbourhood networks | |
| Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatability requirements and test procedures | |
| Electroacoustics \x97 Hearing aids \x97 Method for measuring electroacoustic performance up to 16 kHz | |
| Electronic displays Part 3-1: Evaluation of optical performances - Colour difference based viewing direction dependence | |
| Electronic railway equipment \x97 On-board multimedia and telematic subsystems for railways Part 2: Video surveillance/CCTV services | |
| Encoding guidelines for interoperable master format - Application #6 | |
| Energy efficiency in electroheating installations | |
| Energy management system application program interface (EMS-API) Part 600-1: Common Grid Model Exchange Specification (CGMES) \x96 Structure and rules | |
| Energy management system application program interface (EMS-API) Part 600-2: Common Grid Model Exchange Specification (CGMES) \x96 Exchange profiles specification | |
| Evaluation Methods for Microprocessor-Based Instruments | |
| Evaluation methods for protection against risk of fire in electric tumble dryers | |
| Fibre optic interconnecting devices and passive components - Conditions for testing the protection against dust and water ingress of passive optical protective housings and hardened fibre optic connectors (IP5X, IPX4,... | |
| Fibre optic interconnecting devices and passive components \x96 Vocabulary for passive optical devices | |
| Fibre optic interconnecting devices and passive components \x97 Ferrule assembly and fusion splicer interface dimensions for a fusion splice on connector | |
| Field device tool (FDT) interface specification Part 43: Object model integration profile \x97 CLI and HTML | |
| Field Device Tool (FDT) Interface Specification Part 53-31: Communication implementation for CLI and HTML - IEC 61784 CP 3/1 and CP 3/2 | |
| Field Device Tool (FDT) Interface Specification Part 53-90: Communication implementation for CLI and HTML - IEC 61784 cpf 9 | |
| Flexible display devices Part 5-2: Measuring methods of optical characteristics from the vantage point for curved displays | |
| Flexible display devices Part 5-4: Measuring method of blur in flexible transparent displays | |
| Food safety management systems \x97 A practical guide | |
| Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile | |
| Fuel cell technologies Part 1: Terminology | |
| Fuel cell technologies Part 7-1: Test methods \x97 Single cell performance tests for polymer electrolyte fuel cells (PEFC) | |
| Fuel cell technologies Part 7-2: Test methods \x97 Single cell and stack performance tests for solid oxide fuel cells (SOFC) | |
| Fuel cell technologies Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking \x97 Streamlined life-cycle considered environmental performance characterization of stationary... | |
| Fuel cell technologies Part 9-102: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking \x97 Product category rules for environmental product declarations of... | |
| General lighting \x97 Organic light emitting diode (OLED) products and related equipment \x97 Terms and definitions | |
| General requirements for lighting systems \x97 Safety | |
| General requirements for residual current operated protective devices for DC systems | |
| General requirements for the competence of reference material producers | |
| Generic RMS simulation models of converter-based generating units for power system dynamic analysis | |
| Graphical symbols for diagrams - Guidance on design for standardization in IEC 60617 | |
| Grid code compliance assessment methods for grid connection of wind and PV power plants | |
| Ground-mounted photovoltaic power plants \x97 Design guidelines and recommendations | |
| Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up... | |
| Guidance on material circulation considerations in environmentally conscious design | |
| Guidance on the measurement of hydrophobicity of insulator surfaces | |
| Guide to the development and inclusion of aspects of safety in International Standards for medical devices | |
| Guideline for implementation of copy controlled multimedia interface | |
| Guideline for synchronization of audio and video Part 1-1: Measurement methods for synchronization of audio and video equipment and systems \x97 General | |
| Guideline for synchronization of audio and video Part 2: Methods for synchronization of audio and video systems | |
| Guidelines for principal component reliability testing for LED light sources and LED luminaires | |
| Guidelines for qualifying PV modules, components and materials for operation at high temperatures | |
| Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities | |
| Guidelines for the hosting capacity evaluation of distribution networks for distributed energy resources | |
| Guidelines for the inclusion of documentation aspects in product standards | |
| Health software and health IT systems safety, effectiveness and security Part 2-2: Coordination - Guidance for the implementation, disclosure and communication of security needs, risks and controls | |
| High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications Part 1: Guideline | |
| High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications Part 2: Parameter lists | |
| High voltage direct current (HVDC) power transmission - System requirements for DC-side equipment Part 1: Using line-commutated converters | |
| High voltage direct current (HVDC) substation audible noise | |
| High voltage test techniques \x97 Measurement of partial discharges by electromagnetic and acoustic methods | |
| High-voltage switchgear and controlgear Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52... | |
| High-voltage switchgear and controlgear Part 304: Classification of indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV related to the use in... | |
| High-voltage switchgear and controlgear Part 313: Direct current circuit-breakers | |
| High-voltage switchgear and controlgear Part 314: Direct current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear Part 315: Direct current (DC) transfer switches | |
| High-voltage switchgear and controlgear Part 316: Direct current by-pass switches and paralleling switches | |
| High-voltage switchgear and controlgear Part 318: DC gas-insulated metal-enclosed switchgear for rated voltages including and above 100 kV | |
| High-voltage switchgear and controlgear Part 319: Alternating current circuit-breakers intended for controlled switching | |
| High-voltage switchgear and controlgear Part 320: Environmental aspects and life cycle assessment rules for high-voltage switchgear and controlgear | |
| High-voltage switchgear and controlgear Part 5: Common specifications for direct current switchgear and controlgear | |
| Household and similar appliances \x97 Subsequent safety testing after repair, refurbishment, and remanufacturing Part 1: General requirements | |
| Household and similar electrical appliances \x96 Specifying smart capabilities, of appliances and devices \x96 General aspects | |
| Household electric appliances \x97 Specification of the properties of a digital system for measuring the performance | |
| Hybrid insulators for a.c. and d.c. high-voltage applications - Definitions, test methods and acceptance criteria | |
| Hydraulic machines \x97 Francis turbine pressure fluctuation transposition | |
| Hydraulic turbines, storage pumps and pump-turbines - Hydraulic transient analysis, design considerations and testing | |
| Identification of units of measurement for computer-based processing | |
| IEC System for Conformity Testing and Certification of Wind Turbines - Rules and Procedures | |
| Industrial communication networks - Network and system security Part 1-1: Terminology, concepts and models | |
| Industrial communication networks \x97 Wireless communication networks Part 1: Wireless communication requirements and spectrum considerations | |
| Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz | |
| Industrial electroheating and electromagnetic processing equipment \x97 Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz | |
| Industrial networks - Ethernet-APL port profile specification | |
| Industrial process control devices - Thermographic cameras Part 1: Metrological characterization | |
| Industrial process control devices \x97 Radiation thermometers Part 2: Determination of the technical data for radiation thermometers | |
| Industrial process control systems \x97 Guidelines for process control systems Part 1: Specifications | |
| Industrial-process measurement, control and automation \x97 Digital factory framework Part 1: General principles | |
| Industrial-process measurement, control and automation Part 1: System interface between industrial facilities and the smart grid | |
| Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid | |
| Information model covering the contents of IEC 81346-1 and -2, IEC 61175, IEC 61666 and IEC 81714-3 | |
| Information Security Management Systems A practical guide for SMEs | |
| Information technology - Business operational view Part 14: Open-edi, model and cloud computing architecture | |
| Information technology - Business Operational View Part 6: Technical introduction to e-Business modelling | |
| Information technology - Computer graphics, image processing and environmental representation - Constructs for visual positioning systems in mixed and augmented reality (MAR) | |
| Information technology - Generic cabling for customer premises Part 9902: End-to-end link configurations | |
| Information technology - Generic cabling for customer premises Part 9906: Balanced 1-pair cabling channels up to 600 MHz for single pair Ethernet (SPE) | |
| Information technology - Guidelines for preparation of programming languages standards | |
| Information technology - Home electronic system (HES) application model Part 3-8: GridWise transactive energy framework | |
| Information technology - Implementation and operation of customer premises cabling Part 2-1: Planning and installation - Identifiers within administration systems | |
| Information technology - Interoperability with Assistive Technology (AT) Part 2: Windows accessibility application programming interface (API) | |
| Information technology - Interoperability with Assistive Technology (AT) Part 3: IAccessible2 accessibility application programming interface (API) | |
| Information technology - Interoperability with assistive technology (AT) Part 4: Linux/UNIX graphical environments accessibility API | |
| Information technology - Learning, education, and training - Content packaging Part 3: Best practice and implementation guide | |
| Information technology - Metadata registries (MDR) Part 2: Classification | |
| Information technology - Process assessment - Part 6: An exemplar system life cycle process assessment model | |
| Information technology - Process assessment Part 7: Assessment of organizational maturity | |
| Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for Language Bindings | |
| Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for the Preparation of Language-Independent Service Specifications (LISS) | |
| Information technology - Security techniques - A framework for IT security assurance - Part 3: Analysis of assurance methods | |
| Information technology - Security techniques - Security assurance framework Part 1: Introduction and concepts | |
| Information technology - Security techniques - Security assurance framework Part 2: Analysis | |
| Information technology - Software engineering - Guidelines for the adoption of CASE tools | |
| Information technology - Systems and software engineering - Guide for configuration management tool capabilities | |
| Information technology \x96 Generic cabling for customer premises Part 9907: Specifications for direct attach cabling | |
| Information technology \x96 Generic cabling systems for customer premises Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application | |
| Information technology \x96 Home electronic system application model Part 3-2: GridWise \x96 Interoperability context-setting framework | |
| Information technology \x97 Artificial intelligence \x97 Overview of machine learning computing devices | |
| Information technology \x97 Font information interchange \x97 Registered glyph identifiers | |
| Information technology \x97 Generic cabling for customer premises Part 9908: Guidance for the support of higher speed applications over optical fibre channels | |
| Information technology \x97 Generic cabling for customer premises Part 9909: Evaluation of balanced cabling in support of 25 Gbit/s for reach greater than 30 metres | |
| Information technology \x97 Generic cabling for customer premises Part 9910: Specifications for modular plug terminated link cabling | |
| Information technology \x97 Generic cabling for customer premises Part 9911: Guidelines for the use of balanced single pair applications within a balanced 4-pair cabling system | |
| Information technology \x97 Generic cabling systems for customer premises Part 9903: Matrix modelling of channels and links | |
| Information technology \x97 Home electronic system (HES) application model Part 3-7: GridWise transactive energy systems research, development and deployment roadmap | |
| Information technology \x97 Interoperability with assistive technology (AT) Part 6: Java accessibility application programming interface (API) | |
| Information technology Automatic identification and data capture techniques - Radio frequency identification device performance test methods | |
| Information technology Reference Model of Data Management | |
| Information technology Security techniques A framework for IT security assurance Part 1: Overview and framework | |
| Information technology Security techniques A framework for IT security assurance Part 2: Assurance methods | |
| Information technology Security techniques Guide for the production of Protection Profiles and Security Targets | |
| Information technology Security techniques Information security incident management | |
| Information technology Software measurement Functional size measurement Part 3: Verification of functional size measurement methods | |
| Information technology Software measurement Functional size measurement Part 5: Determination of functional domains for use with functional size measurement | |
| Instructions for use of products by consumers | |
| Integrated circuits \x97 Measurement of electromagnetic emissions Part 3: Measurement of radiated emissions \x97 Surface scan method | |
| Integrated circuits \x97 Measurement of electromagnetic immunity Part 9: Measurement of radiated immunity \x97 Surface scan method | |
| Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC assemblies) according to IEC 61439-2 | |
| LCD multi-screen display terminals Part 1: Conceptual model | |
| Light and lighting \x97 Integrative lighting \x97 Non-visual effects | |
| Light and lighting \x97 Maintenance factor determination \x97 Way of working | |
| Lighting systems - General requirements | |
| Lighting systems and related equipment \x97 Vocabulary | |
| Lightning protection system components (LPSC) Part 8: Requirements for components for isolated LPS | |
| Low-voltage auxiliary power systems Part 1-1: Terminology | |
| Low-voltage docking connectors for removable energy storage units | |
| Low-voltage switchgear and controlgear - Security aspects | |
| Management of network assets in power systems \x97 Management aspects | |
| Marine energy - Wave, tidal and other water current converters - Part 100: Electricity producing wave energy converters - Power performance assessment | |
| Marine energy - Wave, tidal and other water current converters Part 100: Electricity producing wave energy converters - Power performance assessment | |
| Marine energy - Wave, tidal and other water current converters Part 102: Wave energy converter power performance assessment at a second location using measured assessment data | |
| Marine energy - Wave, tidal and other water current converters Part 103: Guidelines for the early stage development of wave energy converters - Best practices and recommended procedures for the... | |
| Marine energy - Wave, tidal and other water current converters Part 10: Assessment of mooring system for marine energy converters (MECs) | |
| Marine energy - Wave, tidal and other water current converters Part 1: Terminology | |
| Marine energy - Wave, tidal and other water current converters Part 1: Vocabulary | |
| Marine energy - Wave, tidal and other water current converters Part 200: Electricity producing tidal energy converters - Power performance assessment | |
| Marine energy - Wave, tidal and other water current converters Part 202: Early stage development of tidal energy converters - Best practices and recommended procedures for the testing of pre-prototype... | |
| Marine energy - Wave, tidal and other water current converters Part 2: Design requirements for marine energy systems | |
| Marine energy - Wave, tidal and other water current converters Part 301: River energy resource assessment | |
| Marine energy - Wave, tidal and other water current converters Part 30: Electrical power quality requirements | |
| Marine energy \x96 Wave, tidal and other water current converters Part 2: Marine energy systems \x96 Design requirements | |
| Marine energy \x96 Wave, tidal and other water current converters Part 40: Acoustic characterization of marine energy converters | |
| Marine energy \x96 Wave, tidal and other water current converters Part 4: Specification for establishing qualification of new technology | |
| Marine energy \x96 Wave, tidal, and other water current converters Part 20: Design and analysis of an Ocean Thermal Energy Conversion (OTEC) plant \x96 General guidance | |
| Marine energy \x97 Wave, tidal and other water current converters Part 101: Wave energy resource assessment and characterization | |
| Marine energy \x97 Wave, tidal and other water current converters Part 10: Assessment of mooring system for marine energy converters (MECs) | |
| Marine energy \x97 Wave, tidal and other water current converters Part 201: Tidal energy resource assessment and characterization | |
| Marine energy \x97 Wave, tidal and other water current converters Part 300: Electricity producing river energy converters \x97 Power performance assessment | |
| Marine energy \x97 Wave, tidal and other water current converters Part 3: Measurement of mechanical loads | |
| Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors | |
| Measurement of internal electric field in insulating materials - Pressure wave propagation method | |
| Measurement procedures for materials used in photovoltaic modules Part 2: Polymeric materials - Frontsheets and backsheets | |
| Measurement procedures for materials used in photovoltaic modules Part 2: Polymeric materials \x97 Frontsheets and backsheets | |
| Measurement procedures for materials used in photovoltaic modules Part 5-2: Edge seals - Durability evaluation guideline | |
| Measurement procedures for materials used in photovoltaic modules Part 6-3: Adhesion testing for PV module laminates using the single cantilevered beam (SCB) method | |
| Measurement procedures for materials used in photovoltaic modules Part 7-2: Environmental exposures - Accelerated weathering tests of polymeric materials | |
| Measurement procedures for materials used in photovoltaic modules Part 8-1: Electrically conductive adhesive (ECA) - Measurement of material properties | |
| Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure Part 1: Low frequency magnetic fields | |
| Mechanical structures for electrical and electronic equipment - Aisle containment for it cabinets Part 3: Aspects of operational and personal safety | |
| Metallic communication cable test methods Part 4-1: Electromagnetic compatibility (EMC) \x96 Introduction to electromagnetic screening measurements | |
| Microgrids Part 1: Guidelines for microgrid projects planning and specification | |
| Microgrids Part 2: Guidelines for operation | |
| Microgrids Part 3-1: Technical requirements \x97 Protection and dynamic control | |
| Microgrids Part 3-2: Technical requirements - Energy management systems | |
| Microgrids Part 3-3: Technical requirements - Self-regulation of dispatchable loads | |
| Microgrids Part 3-4: Technical requirements - Microgrid monitoring and control systems | |
| Miniature fuses Part 8: Fuse resistors with particular overcurrent protection | |
| Multimedia home server systems - Conceptual model for digital rights management | |
| Multimedia systems - Haptics - Haptics stimuli descriptors | |
| Multimedia systems and equipment - Colour measurement and management Part 13: Measurement method of display colour properties depending on observers | |
| Multimedia systems and equipment \x97 Multimedia e-publishing and e-book \x97 Conceptual model for multimedia e-publishing | |
| Nanomanufacturing - Key control characteristics - Part 2-1: Carbon nanotube materials - Film resistance | |
| Nanomanufacturing - Key control characteristics Part 11-1: Electromagnetic compatibility - Shielding effectiveness of nanomaterials: near-field probe method | |
| Nanomanufacturing - Key control characteristics Part 2-4: Carbon nanotube materials - Test methods for determination of resistance of individual carbon nanotubes | |
| Nanomanufacturing - Key control characteristics Part 2-6: Carbon nanotube-related products - Thermal diffusivity of vertically-aligned carbon nanotubes: flash method | |
| Nanomanufacturing - Key control characteristics Part 3-3: Luminescent nanomaterials - Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC) | |
| Nanomanufacturing - Key control characteristics Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials | |
| Nanomanufacturing - Key control characteristics Part 4-8: Nano-enabled electrical energy storage - Determination of water content in electrode nanomaterials, Karl Fischer method | |
| Nanomanufacturing - Key control characteristics Part 5-3: Thin-film organic/nano electronic devices - Measurements of charge carrier concentration | |
| Nanomanufacturing - Key control characteristics Part 5-4: Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS) | |
| Nanomanufacturing - Key control characteristics Part 6-10: Graphene-based material - Sheet resistance: Terahertz time-domain spectroscopy | |
| Nanomanufacturing - Key control characteristics Part 6-16: Two-dimensional materials - Carrier concentration: Field effect transistor method | |
| Nanomanufacturing - Key control characteristics Part 7-2: Nano-enabled photovoltaics - Device evaluation method for indoor light | |
| Nanomanufacturing - Key Control Characteristics Part 8-3: Nano-enabled metal-oxide interfacial devices - Analogue resistance change and resistance fluctuation: Electrical resistance measurement | |
| Nanomanufacturing - Key control characteristics Part 8-4: Metal-oxide interfacial devices - Activation energy of electronic trap states: Low-frequency-noise spectroscopy | |
| Nanomanufacturing - Material specifications Part 5-2: Nano-enabled electrodes of electrochemical capacitors - Blank detail specification | |
| Nanomanufacturing - Product specification Part 4-4: Nanophotonic products - Blank detail specification: Quantum dot enabled light conversion films | |
| Nanomanufacturing - Product specifications Part 5-1: Nanoporous activated carbon - Blank detail specification: Electrochemical capacitors | |
| Nanomanufacturing - Reliability assessment Part 4-1: Nanophotonic products - Optical stability test of quantum dot enabled light conversion films: Temperature, humidity and light exposure | |
| Nanomanufacturing \x96 Key control characteristic Part 6-13: Graphene powder \x96 Oxygen functional group content: Boehm titration method | |
| Nanomanufacturing \x96 Material specifications Part 4-1: Luminescent nanomaterials \x96 Blank detail specification | |
| Nanomanufacturing \x97 Key control characteristics Part 2-5: Carbon nanotube materials \x97 Mass density of vertically-aligned carbon nanotubes: X-ray absorption method | |
| Nanomanufacturing \x97 Key control characteristics Part 4- 2: Nano-enabled electrical energy storage \x97 Physical characterization of cathode nanomaterials, density measurement | |
| Nanomanufacturing \x97 Key control characteristics Part 4-1 Cathode nanomaterials for lithium ion batteries \x97 Electrochemical characterisation, 2-electrode cell method | |
| Nanomanufacturing \x97 Key control characteristics Part 4-4: Nano-enabled electrical energy storage \x97 Thermal characterization of nanomaterials, nail penetration method | |
| Nanomanufacturing \x97 Key control characteristics Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage \x97 Electrochemical characterization, 3-electrode cell method | |
| Nanomanufacturing \x97 Key control characteristics Part 4-6: Nano-enabled electrical energy storage \x97 Determination of carbon content for nano-enabled electrode materials, infrared absorption method | |
| Nanomanufacturing \x97 Key control characteristics Part 4-7: Nano-enabled electrical energy storage \x97 Determination of magnetic impurities in anode nanomaterials, ICP-OES method | |
| Nanomanufacturing \x97 Key control characteristics Part 5-1: Thin-film organic/nano electronic devices \x97 Carrier transport measurements | |
| Nanomanufacturing \x97 Key control characteristics Part 6-1: Graphene-based material \x97 Volume resistivity: four probe method | |
| Nanomanufacturing \x97 Key control characteristics Part 6-35: Graphene-related products \x97 Density: free-pouring, tapping and compressing method | |
| Nanomanufacturing \x97 Key control characteristics Part 6-3: Graphene-based material \x97 Domain size: substrate oxidation | |
| Nanomanufacturing \x97 Key control characteristics Part 6-4: Graphene \x97 Surface conductance measurement using resonant cavity | |
| Nanomanufacturing \x97 Key control characteristics Part 8-1: Nano-enabled metal-oxide interfacial devices \x97 Test method for defect states by thermally stimulated current | |
| Nanomanufacturing \x97 Key control characteristics Part 8-2: Nano-enabled metal-oxide interfacial devices \x97 Test method for the polarization properties by thermally stimulated depolarization current | |
| Nanomanufacturing \x97 Key control characteristics Part 9-1: Traceable spatially resolved nano-scale stray magnetic field measurements \x97 Magnetic force microscopy | |
| Nanomanufacturing \x97 Material specifications Part 4-2: Luminescent nanomaterials \x97 Detail specification for general lighting and display applications | |
| Nanomanufacturing \x97 Product specification Part 5-3: Nanoenabled energy storage \x97 Blank detail specification: silicon nanosized materials for the negative electrode of lithium-ion batterie | |
| Nanotechnologies - Description, measurement and dimensional quality parameters of artificial gratings | |
| Nanotechnologies \x97 Vocabulary Part 9: Nano-enabled electrotechnical products and systems | |
| Nanotechnology - Reliability assessment Part 2-1: Nano-enabled photovoltaic devices - Stability test | |
| Occupational health and safety management systems A practical guide for SMEs | |
| Optical backplanes \x97 Product specification Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors | |
| Optical Fibres - Polarization Mode Dispersion Measurement Techniques for Single-Mode Optical Fibres | |
| Organic light emitting diode (OLED) displays Part 6-5: Measuring methods of dynamic range properties | |
| Packaging \x97 Recommendations for addressing consumer needs | |
| Photovoltaic (PV) arrays \x97 Design requirements | |
| Photovoltaic (PV) modules - Type approval, design and safety qualification - Retesting | |
| Photovoltaic (PV) modules \x96 Qualifying guidelines for increased hail resistance | |
| Photovoltaic (PV) modules \x96 Test methods for the detection of potential-induced degradation Part 1-1: Crystalline silicon \x96 Delamination | |
| Photovoltaic (PV) modules \x97 Cyclic (dynamic) mechanical load testing | |
| Photovoltaic (PV) modules \x97 Partial shade endurance testing for monolithically integrated products | |
| Photovoltaic (PV) modules \x97 Test methods for the detection of potential-induced degradation Part 1: Crystalline silicon | |
| Photovoltaic (PV) modules \x97 Test methods for the detection of potential-induced degradation Part 2: Thin-film | |
| Photovoltaic (PV) modules and cells \x97 Measurement of diode ideality factor by quantitative analysis of electroluminescence images | |
| Photovoltaic (PV) modules through the life cycle \x96 Environmental health and safety (EH&S) risk assessment \x96 General principles and nomenclature | |
| Photovoltaic (PV) systems \x96 Requirements for testing, documentation and maintenance Part 3: Photovoltaic modules and plants \x96 Outdoor infrared thermography | |
| Photovoltaic cells Part 2: Electroluminescence imaging of crystalline silicon solar cells | |
| Photovoltaic cells Part 3: Measurement of current-voltage characteristics of bifacial photovoltaic cells | |
| Photovoltaic cells Part 4: Measurement of light and elevated temperature induced degradation of crystalline silicon photovoltaic cells | |
| Photovoltaic concentrator cell documentation | |
| Photovoltaic direct-driven appliance controllers Part 2: Operation modes and graphic display | |
| Photovoltaic modules - Bypass diode electrostatic discharge susceptibility testing | |
| Photovoltaic modules - Extended-stress testing Part 2: Polymeric component materials | |
| Photovoltaic modules \x97 Extended-stress testing Part 1: Modules | |
| Photovoltaic power systems (PVPS) - Information model for availability | |
| Photovoltaic power systems - Reliability practices for operation | |
| Photovoltaic systems - Specifications for solar trackers | |
| Photovoltaic systems \x96 Guidelines for effective quality assurance of power conversion equipment | |
| Photovoltaic systems \x97 Power conversion equipment performance \x97 Energy evaluation method | |
| Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 4-1: Piezoelectric materials - Synthetic quartz crystal | |
| Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 4-4: Piezoelectric materials - Single crystal wafers for surface acoustic wave (SAW) devices... | |
| Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 5: Piezoelectric sensors | |
| Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection \x97 Glossary Part 3: Piezoelectric, dielectric and electrostatic oscillators | |
| Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with... | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or... | |
| Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz | |
| Power installations exceeding 1 kV a.c. and 1,5 kV d.c. Part 2: d.c. | |
| Power installations exceeding 1 kV AC and 1,5 kV DC Part 0: Principles to be observed in the design and erection of high voltage installations - Safety of high voltage... | |
| Power quality management Part 1: General guidelines | |
| Power quality management Part 2: Power Quality Monitoring System | |
| Power quality management Part 3: User characteristics modelling | |
| Power quality measurement in power supply systems Part 3: Maintenance tests, calibration | |
| Power system stability control Part 1: Guideline for framework design of power system stability control | |
| Power systems management and associated information exchange - Data and communication security Part 100-4: Cybersecurity conformance testing for IEC 62351-4 | |
| Power systems management and associated information exchange - Data and communications security Part 100-1: Conformance test cases for IEC TS 62351-5 and IEC TS 60870-5-7 | |
| Power systems management and associated information exchange - Data and communications security Part 100-3: Conformance test cases for the IEC 62351-3, the secure communication extension for profiles including TCP/IP | |
| Power systems management and associated information exchange - Data and communications security Part 5: Security for IEC 60870-5 and derivatives | |
| Power systems management and associated information exchange \x97 Data and communication security Part 100-6: Cybersecurity conformance testing for IEC 61850-8-1 and IEC 61850-9-2 | |
| Power systems management and associated information exchange \x97 Interoperability in the long term Part 102: CIM \x97 IEC 61850 harmonization | |
| Preparation and processing of source definitions for data element types - Guidelines for product committees | |
| Primary optics for concentrator photovoltaic systems | |
| Process management for avionics - Aerospace and defence electronic systems containing lead-free solder Part 1: Preparation for a lead-free control plan | |
| Process management for avionics - Aerospace and defence electronic systems containing lead-free solder Part 23: Rework and repair guidance to address the implications of of lead-free electronics and mixed assemblies... | |
| Process management for avionics - Aerospace and defence electronic systems containing lead-free solder Part 2: Mitigation of deleterious effects of tin | |
| Process management for avionics - Aerospace qualified electronic components (AQEC) Part 1: Integrated circuits and discrete semiconductors | |
| Process management for avionics - Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors | |
| Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications Part 1: General requirements for high reliability integrated circuits and discrete semiconductors | |
| Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan | |
| Process management for avionics \x96 Aerospace and defence electronic systems containing lead-free solder Part 4: Ball grid array (BGA) re-balling | |
| Process management for avionics \x97 Aerospace and defence electronic systems containing lead-free solder Part 21: Program management \x97 Systems engineering guidelines for managing the transition to lead-free electronics | |
| Process management for avionics \x97 Aerospace and defence electronic systems containing lead-free solder Part 22: Technical guidelines | |
| Process management for avionics \x97 Aerospace and defence electronic systems containing lead-free solder Part 3: Performance testing for systems containing lead-free solder and finishes | |
| Process management for avionics \x97 Counterfeit prevention Part 2: Managing electronic components from non-franchised sources | |
| Process management for avionics \x97 Electronic components for aerospace, defence and high performance (ADHP) applications Part 2: General requirements for passive components | |
| Process management for avionics \x97 Management plan Part 2: Preparation and maintenance of an electronic COTS assembly management plan | |
| Professional video storage equipment - Guideline of time code transmission | |
| Professional video storage products \x96 Tape-less camera recorder using MXF file format \x96 Encoding guidelines Part 2: Mapping MPEG-2 and AVC Streams into MXF | |
| Professional video storage products \x97 Tape-less camera recorder using MXF file format \x97 Encoding guidelines Part 1: MXF Operational Patterns | |
| Programming languages C Extensions to support embedded processors | |
| Radiation protection instrumentation - Electronic counting dosemeters for pulsed fields of ionizing radiation | |
| Radiation protection instrumentation \x96 Dosemeters for pulsed fields of ionizing radiation | |
| Railway applications \x97 Procedure to determine the performance requirements for radio systems applied to radio-based train control systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 12-1: Laboratory evaluation of lamps and lighting appliances for off-grid electricity systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 12-1: Selection of lamps and lighting appliances for off-grid electricity systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 3: Project development and management | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 7-3: Generator set - Selection of generator sets for rural electrification systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 7-4: Generators \x96 Integration of solar with other forms of power generation within hybrid power systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 7: Generators | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries and battery management systems for stand-alone electrification systems \x97 Specific case of automotive flooded lead-acid... | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 9-1: Integrated systems \x97 Micropower systems | |
| Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems - Laboratory evaluation of standalone renewable energy products for rural electrification | |
| Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-2: Integrated systems - Microgrids | |
| Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-4: Integrated system - User installation | |
| Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural electrification | |
| Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and design | |
| Recommendations for small renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards | |
| Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-3: Integrated system - User interface | |
| Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-5: Integrated system - Selection of stand-alone lighting kits for rural electrification | |
| Reference materials - Good practice in using reference materials | |
| Reference materials - Selected terms and definitions | |
| Reference materials \x97 Contents of certificates, labels and accompanying documentation | |
| Reference materials \x97 Guidance for characterization and assessment of homogeneity and stability | |
| Reference materials Part 1: Guide to terms and definitions used in connection with reference materials | |
| Refrigerant detection systems for flammable refrigerants | |
| Reliability and availability evaluation of HVDC systems Part 1: HVDC systems with line commutated converters | |
| Reliability of industrial automation devices and systems Part 1: Assurance of automation devices reliability data and specification of their source | |
| Renewable energy and hybrid systems for rural electrification Part 7-2: Generator set - Off-grid wind turbines | |
| Renewable energy and hybrid systems for rural electrification Part 9-6: Integrated systems \x96 Recommendations for selection of Photovoltaic Individual Electrification Systems (PV-IES) | |
| Renewable energy and hybrid systems for rural electrification Part 9-7: Recommendations for selection of inverters | |
| Renewable energy and hybrid systems for rural electrification Part 9-8: Integrated systems \x96 Requirements for stand-alone renewable energy products with power ratings less than or equal to 350 W | |
| Renewable energy off-grid systems Part 100: Overview of the IEC 62257 series | |
| Renewable energy off-grid systems Part 301: Generators \x97 Integration of solar with other forms of power generation within hybrid power systems | |
| Representation of communication in power utility automation | |
| Requirements for industrial water quality analyzer system \x97 Photometry | |
| Risk Management - Vocabulary - Guidelines for Use in Standards | |
| Risk management \x97 Vocabulary | |
| Safe management and operation of electrical installations | |
| Safety aspects - Guidelines for child safety in standards and other specifications | |
| Safety aspects \x97 Guidelines for their inclusion in standards | |
| Safety of machinery - Guidelines on functional safety of safety-related control system | |
| Safety of machinery - Safety-related sensors used for the protection of persons Part 3: Sensor technologies and algorithms | |
| Safety of machinery - Safety-related sensors used for the protection of persons | |
| Safety of machinery - Security aspects related to functional safety of safety-related control systems | |
| Safety of machinery. Rules for drafting and presentation of safety standards | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children | |
| Security for industrial automation and control systems Part 1-5: Scheme for IEC 62443 security profiles | |
| Security for industrial automation and control systems Part 6-1: Security evaluation methodology for IEC 62443-2-4 | |
| Security for industrial automation and control systems Part 6-2: Security evaluation methodology for IEC 62443-4-2 | |
| Sensing devices for non-intrusive load monitoring (NILM) systems | |
| Simulators used for testing of photovoltaic power conversion equipment \x97 Recommendations Part 2: DC power simulators | |
| Simulators used for testing of photovoltaic power conversion equipment \x97 Recommendations | |
| Solar thermal electric plants Part 1-2: General - Creation of annual solar radiation data set for solar thermal electric (STE) plant simulation | |
| Solar thermal electric plants Part 1-3: General - Data format for meteorological data sets | |
| Solar thermal electric plants Part 2-1: Thermal energy storage systems \x97 Characterization of active, sensible systems for direct and indirect configurations | |
| Standardized product ontology register and transfer by spreadsheets Part 2: Application guide for use with the IEC common data dictionary (CDD) | |
| Strategic principles for future IEC and ISO standardization in industrial automation | |
| Supplementary requirements for intelligent assemblies | |
| Surface cleaning appliances Part 1: General requirements on test material and test equipment | |
| Switchgear and controlgear and their assemblies for low voltage \x96 Environmental aspects | |
| Systems and software engineering - Systems and software assurance Part 1: Concepts and vocabulary | |
| Systems interface between customer energy management system and the power management system Part 3: Architecture | |
| Terrestrial photovoltaic (PV) modules - Guidelines for increased confidence in PV module design qualification and type approval | |
| Terrestrial photovoltaic (PV) modules for consumer products \x97 Design qualification and type approval | |
| TESTING AND RATING PROCEDURE FOR HYDRO MECHANICAL GREASE INTERCEPTORS WITH APPENDIX OF INSTALLATION AND MAINTENANCE | |
| Tracked Changes (Redline) - Demand-side power quality management | |
| Tracked Changes (Redline) - Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines | |
| Tracked Changes (Redline) - Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses | |
| Tracked Changes (Redline) - Guideline for synchronization of audio and video Part 1-1: Measurement methods for synchronization of audio and video equipment and systems \x97 General | |
| Tracked Changes (Redline) - Guideline for synchronization of audio and video Part 2: Methods for synchronization of audio and video systems | |
| Tracked Changes (Redline) - High voltage direct current (HVDC) substation audible noise | |
| Tracked Changes (Redline) - Identification of units of measurement for computer-based processing | |
| Tracked Changes (Redline) - Industrial-process measurement, control and automation \x97 Digital factory framework Part 1: General principles | |
| Tracked Changes (Redline) - Industrial-process measurement, control and automation Part 1: System interface between industrial facilities and the smart grid | |
| Tracked Changes (Redline) - Information technology - Generic cabling for customer premises - Part 9906: Balanced single-pair cabling channels up to 600 MHz for single-pair Ethernet (SPE) | |
| Tracked Changes (Redline) - Information technology \x97 Security techniques \x97 Guidance for the production of protection profiles and security targets | |
| Tracked Changes (Redline) - Marine energy - Wave, tidal and other water current converters - Part 101: Wave energy resource assessment and characterization | |
| Tracked Changes (Redline) - Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECs) | |
| Tracked Changes (Redline) - Marine energy \x97 Wave, tidal and other water current converters \x97 Part 100: Electricity producing wave energy converters \x97 Power performance assessment | |
| Tracked Changes (Redline) - Marine energy \x97 Wave, tidal and other water current converters \x97 Part 103: Guidelines for the early stage development of wave energy converters \x97 Best practices... | |
| Tracked Changes (Redline) - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors | |
| Tracked Changes (Redline) - Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets | |
| Tracked Changes (Redline) - Photovoltaic (PV) modules - Test methods for the detection of potential-induced degradation - Part 1: Crystalline silicon | |
| Tracked Changes (Redline) - Photovoltaic (PV) modules \x97 Type approval, design and safety qualification \x97 Retesting | |
| Tracked Changes (Redline) - Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 4-1: Piezoelectric materials - Synthetic quartz crystal | |
| Tracked Changes (Redline) - Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 4-4: Piezoelectric materials - Single crystal wafers for surface... | |
| Tracked Changes (Redline) - Power electronics systems and equipment \x97 Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz... | |
| Tracked Changes (Redline) - Process management for avionics \x97 Aerospace qualified electronic components (AQEC) Part 1: Integrated circuits and discrete semiconductors | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 12-1: Selection of lamps and lighting appliances for offgrid electricity systems | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 1: General introduction to IEC 62257 series and rural electrification | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 3: Project development and management | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 4: System selection and design | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 7-3: Generator set - Selection of generator sets for rural electrification systems | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 7: Generators | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries and battery management systems for stand-alone electrification systems \x97 Specific case... | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 9-1: Integrated systems \x97 Micropower systems | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 9-3: Integrated systems \x97 User interface | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems - Laboratory evaluation of stand-alone renewable energy products for rural electrification | |
| Tracked Changes (Redline) - Recommendations for renewable energy and hybrid systems for rural electrification Part 9\x964: Integrated systems \x97 User installation | |
| Tracked Changes (Redline) - Reference materials \x97 Selected terms and definitions | |
| Tracked Changes (Redline) - Renewable energy off-grid systems \x97 Part 100: Overview of the IEC 62257 series | |
| Tracked Changes (Redline) - Renewable energy off-grid systems \x97 Part 9-8: Integrated systems \x97 Requirements for standalone renewable energy products with power ratings less than or equal to 350 W... | |
| Tracked Changes (Redline) - Renewable energy off-grid systems Part 301: Generators - Integration of solar with other forms of power generation within hybrid power systems | |
| Tracked Changes (Redline) - Safety of machinery - Security aspects related to functional safety of safety-related control systems | |
| Tracked Changes (Redline) - Surface cleaning appliances Part 1: General requirements on test material and test equipment | |
| Tracked Changes (Redline) - Ultrasonics - Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method | |
| Tracked Changes (Redline) - Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types... | |
| Tracked Changes (Redline) - Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance | |
| Tracked Changes (Redline) \x96 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications Part 2: General requirements for passive components | |
| UHV AC transmission systems Part 101: Voltage regulation and insulation design | |
| UHV AC transmission systems Part 102: General system design | |
| UHV AC transmission systems Part 103: Security and stability requirements for system planning and design | |
| UHV AC transmission systems Part 201: UHV AC substation design | |
| UHV AC transmission systems Part 202: UHV AC Transmission line design | |
| UHV AC transmission systems Part 301: On-site acceptance tests | |
| UHV AC transmission systems Part 302: Commissioning | |
| Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air | |
| Ultrasonics - Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method | |
| Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types | |
| Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system\x92s elementary performance | |
| Ultrasonics \x96 Methods for the characterization of the ultrasonic properties of materials | |
| Ultrasonics \x96 Output test \x96 Guidance for the maintenance of ultrasound physiotherapy systems | |
| Ultrasonics \x97 Field characterization \x96 Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems | |
| Ultrasonics \x97 Pulse-echo scanners \x97 Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types | |
| Ultrasonics \x97 Pulse-echo scanners \x97 Simple methods for periodic testing to verify stability of an imaging system\x92s elementary performance | |
| Utility-interconnect ed photovoltaic inverters - Test procedure for over voltage ride-through measurements | |
| Utility-interconnect ed photovoltaic inverters - Test procedure for under voltage ride-through measurements | |
| Utility-interconnect ed photovoltaic inverters \x97 Test procedure for low voltage ride-through measurements | |
| Virtual Power Plants Part 2: Use Cases | |
| Washing machines for household use \x97 Method for measuring the microbiological performance | |
| Winding wires \x97 Test methods \x97 Electrical endurance under high frequency voltage impulses |
| << Prev | Next >> |