AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES. | |
| Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives | |
| ADHESIVES FOR TILES - DETERMINATION OF WETTING CAPABILITY. | |
| ADHESIVES FOR TILES. DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES. | |
| Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements | |
| Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods | |
| Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance | |
| Anti-flooding devices for buildings - Part 1: Requirements | |
| Anti-flooding devices for buildings - Part 2: Test methods. | |
| Anti-flooding devices for buildings. Part 3: Quality assurance. | |
| Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test | |
| Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method | |
| Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method | |
| Blank Detail Specification: C.W. magnetrons for RF heating or cooking applications | |
| Blank Detail Specification: C.W. power amplifier travelling wave tubes up to 500 Watts | |
| Blank Detail Specification: Pulsed magnetrons (Excluding frequency agile magnetrons) | |
| Cabinet roller towels - Performance requirements and processing. | |
| Cathodic protection measurement techniques | |
| Chemical attack on concrete - Determination of aggressive carbon dioxide content in water | |
| Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2,... | |
| Chimneys - Requirements and test methods for clay/ceramic flue terminals | |
| Cleaning services - Basic requirements and recommendations for quality measuring systems. | |
| Coil coated metals - Test methods - Part 0: General introduction and list of test methods. | |
| Coil coated metals - Test methods - Part 0: General introduction | |
| Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation. | |
| Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation | |
| Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) | |
| Coil coated metals - Test methods - Part 12: Resistance to scratching | |
| Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat. | |
| Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat | |
| Coil coated metals - Test methods - Part 14: Chalking (Helmen method) | |
| Coil coated metals - Test methods - Part 15: Metamerism | |
| Coil coated metals - Test methods - Part 16: Resistance to abrasion | |
| Coil coated metals - Test methods - Part 17: Adhesion of strippable films | |
| Coil coated metals - Test methods - Part 18: Resistance to staining. | |
| Coil coated metals - Test methods - Part 18: Resistance to staining | |
| Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing | |
| Coil coated metals - Test methods - Part 1: Coating thickness. | |
| Coil coated metals - Test methods - Part 1: Film thickness | |
| Coil coated metals - Test methods - Part 20: Foam adhesion | |
| Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels | |
| Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison | |
| Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide | |
| Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking | |
| Coil coated metals - Test methods - Part 25: Resistance to humidity | |
| Coil coated metals - Test methods - Part 26: Resistance to condensation of water | |
| Coil coated metals - Test methods - Part 27: Resistance to humid poultice (cataplasm test) | |
| Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) | |
| Coil coated metals - Test methods - Part 2: Gloss | |
| Coil coated metals - Test methods - Part 2: Specular gloss. | |
| Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison. | |
| Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison | |
| Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison | |
| Coil coated metals - Test methods - Part 4: Pencil hardness. | |
| Coil coated metals - Test methods - Part 4: Pencil hardness | |
| Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test). | |
| Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) | |
| Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) | |
| Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test). | |
| Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) | |
| Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) | |
| Coil coated metals - Test methods - Part 9: Resistance to water immersion. | |
| Coil coated metals - Test methods - Part 9: Resistance to water immersion | |
| Coil coated metals - Test methods- Part 8: Resistance to salt spray (fog). | |
| Coil coated metals- Test methods- Part 15: Metamerism. | |
| Coil coated metals- Test methods- Part 23: Colour stability in humid atmospheres containing sulfur dioxide. | |
| Coil coated metals. Test methods. Part 14: Chalking (Helmen method). | |
| Condition of drain and sewer systems outside buildings. Part 1: General requirements. | |
| Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system | |
| Cooper and copper alloys - Products of high conductivity copper for electronic tubes, semicondcutor devices and vacuum applications. | |
| COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES. | |
| Copper and copper alloys - Copper plate, sheet and strip for electrical purposes | |
| Copper and copper alloys - Copper profiles and profiled wire for electrical purposes. | |
| Copper and copper alloys - Copper profiles and profiled wire for electrical purposes | |
| COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES. | |
| Copper and copper alloys - Copper rod, bar and wire for general electrical purposes | |
| Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors | |
| COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFCTURE OF ELECTRICAL CONDUCTORS. | |
| COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES. | |
| Copper and copper alloys - Seamless copper tubes for electrical purposes | |
| Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper | |
| Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes | |
| COPPER AND COPPER ALLOYS - TEST METHODS FOR ASSESSING PROTECTIVE TIN COATINGS ON DRAWN ROUND COPPER WIRE FOR ELECTRICLA PURPOSES. | |
| Cranes - Access | |
| Cranes - Control and control stations | |
| Cranes - Control devices and control stations | |
| Cranes - Controls and control stations | |
| Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements | |
| Cryogenic vessels. Large transportable vacuum insulated vessels. Part 1: Fundamental requirements. | |
| Determination of compressive strength of lightweight aggregate concrete with open structure (Endorsed by AENOR in August of 2006.) | |
| DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. | |
| Determination of compressive strength of lightweight aggregate concrete with open structure | |
| Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery | |
| Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing | |
| Determination of dimensional characteristics of sleeping bags. Part 1: Internal dimensions. | |
| Determination of flexural strength of autoclaved aerated concrete | |
| DETERMINATION OF MOISTURE CONTENT OF AUTOCLAVED AERATED CONCRETE. | |
| Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements. (ISO 3471:1994, including Amendment 1:1997 modified) | |
| Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) | |
| Earth-moving machinery - Tip-over protection structures (TOPS) for compact excavators - Laboratory tests and performance requirements. (ISO 12117:1997 modified). | |
| EARTH-MOVING MACHINERY- ROLL-OVER PROTECTIVE STRUCTURES- LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 3471:1994, INCLUDING AMENDMENT 1:1997 MODIFIED) | |
| External blinds - Performance requirements including safety | |
| External blinds and awnings - Performance requirements including safety | |
| Fertilizers and liming materials - Classification | |
| Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests | |
| Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests | |
| Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services | |
| Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services | |
| Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts... | |
| Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems | |
| Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests (Endorsed by AENOR in September of 2006.) | |
| Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests | |
| Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables | |
| Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables | |
| Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components | |
| Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance | |
| Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections. | |
| Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance. | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength | |
| Food processing machinery - Curing injection machines - Safety and hygiene requirements (Endorsed by AENOR in July of 2010.) | |
| Food processing machinery - Curing injection machines - Safety and hygiene requirements | |
| Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements | |
| Food processing machinery - Mixing machines - Safety and hygiene requirements | |
| Foodstuffs - Determination of fumonisins B1 and B2 in maize - HPLC method with solid phase extraction clean-up. | |
| Footwear - Test methods for uppers - Deformability | |
| Footwear - Test methods for uppers - Delamination resistance | |
| Footwear - Test methods for uppers - High temperature behaviour. | |
| Footwear - Test methods for uppers - Resistance to damage on lasting. | |
| Footwear - Test methods for uppers - Resistance to damage on lasting | |
| Footwear - Test methods for uppers - Tensile strength and elongation. | |
| Footwear - Test methods for uppers - Water resistance. | |
| Footwear - Test methods for uppers - Water resistance | |
| Footwear - Test methods for uppers and lining - Flex resistance. | |
| Footwear - Test methods for uppers and lining - Water vapour permeability and absorption | |
| Footwear - Test methods for uppers, lining and insocks - Abrasion resistance. | |
| Footwear - Test methods for uppers, lining and insocks - Abrasion resistance | |
| Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing. | |
| Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing | |
| Footwear - Test methods for uppers, lining and insocks - Colour migration | |
| Footwear - Test methods for uppers, lining and insocks - Seam strength. | |
| Footwear - Test methods for uppers, lining and insocks - Tear strength. | |
| Footwear - Test methods for uppers, lining and insocks - Tear strength | |
| Footwear - Test methods for uppers, lining and insocks - Thermal insulation. | |
| Footwear- Test methods for uppers - Deformability. | |
| Forestry machinery - Wood chippers - Safety | |
| Gas meters - Diaphragm gas meters | |
| Gas meters - Diaphragm meters | |
| General requirements for in vitro diagnostic medical devices for self-testing. | |
| Generic Specification: Magnetrons | |
| Generic Specification: Travelling wave amplifier tubes | |
| Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures | |
| Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures | |
| Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment | |
| Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites | |
| Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE TEST). | |
| Glass in building - Security glazing - Testing and classification of resistance against explosion pressure. | |
| Glass in building - Security glazing - Testing and classification of resistance against explosion pressure | |
| Health informatics - Electronic health record communication - Part 1: Reference model | |
| Health informatics - Electronic health record communication - Part 2: Archetypes interchange specification (Endorsed by AENOR in October of 2007.) | |
| Health informatics - Electronic health record communication - Part 3: Reference archetypes and term lists | |
| Health informatics - Electronic health record communication - Part 4: Security | |
| Health informatics - Messages for maintenance of supporting information in healthcare systems - Part 1: Updating of coding schemes | |
| Heat exchanger - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement | |
| Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement | |
| Helmets for users of luges (Endorsed by AENOR in April of 2012.) | |
| Helmets for users of luges. | |
| Highway maintenance machines - Safety requirements | |
| Industrial process control valves. | |
| Industrial process control valves | |
| Industrial valves - Copper alloy ball valves | |
| Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems. | |
| Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems | |
| Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m | |
| Inland navigation vessels - Vocabulary | |
| Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements | |
| Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system | |
| Leather - Physical and mechanical tests - Determination of heat resistance of patent leather. | |
| Manufactured articles filled with feather and down - Measurement of water absorption of filling material | |
| Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing | |
| Manufactured articles filled with feather and down - Requirements for clothing - Light use. | |
| Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration. | |
| Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration | |
| Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| METALLIC INDUSTRIAL PIPING - PART 1: GENERAL. | |
| Metallic industrial piping - Part 1: General | |
| Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in June of 2020.) | |
| Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS. | |
| Metallic industrial piping - Part 2: Materials | |
| Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2020.) | |
| Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| METALLIC INDUSTRIAL PIPING - PART 3: DESIGN AND CALCULATION. | |
| Metallic industrial piping - Part 3: Design and calculation | |
| Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION. | |
| Metallic industrial piping - Part 4: Fabrication and installation | |
| Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING. | |
| Metallic industrial piping - Part 5: Inspection and testing | |
| Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by AENOR in August of 2006.) | |
| Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| Metallic industrial piping - Part 6: Additional requirements for buried piping | |
| Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping | |
| Metallic industrial piping. Part 5: Inspection and testing. | |
| Metallic industrial piping. Part 6: Additional requirements for buried piping | |
| Non-destructive testing - Acoustic emission - General principles | |
| Non-destructive testing - Acoustic emission testing - General principles | |
| Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods. (ISO 11979-3:1999, modified) | |
| Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability. (ISO 11979-6:2002,modifie d) | |
| Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2001, modified) | |
| Ophthalmic implants. Intraocular lenses. Part 5: Biocompatibility. (ISO 11979-5:1999, modified) | |
| OPHTHALMIC IMPLANTS. INTRAOCULAR LENSES. PART 8: FUNDAMENTAL REQUIREMENTS (ISO 11979-8:1999, MODIFIED) | |
| Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity | |
| Packaging - Paper sacks for household waste collection - Types, requirements and test methods | |
| Pallet superstructures - Pallet collars - Test methods and performance requirements. | |
| Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes | |
| Plastics sacks for household waste collection - Types, requirements and test methods | |
| Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete | |
| Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products | |
| Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack | |
| Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations. | |
| Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods | |
| Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods. | |
| Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods | |
| Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements | |
| Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance. | |
| Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength. | |
| Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance. | |
| Protective clothing. Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players. Requirements and test methods. | |
| Protective gloves for motorcycle riders - Requirements and test methods | |
| Protective gloves for professional motorcycle riders - Requirements and test methods. | |
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs | |
| Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions | |
| Railway Applications - Track - Performance Requirements for Fastening Systems - Part 2: Fastening systems for concrete sleepers in ballast | |
| Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers | |
| Railway Applications - Track - Performance Requirements for Fastening Systems - Part 3: Fastening Systems for wood and polymeric composite sleepers | |
| Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers. | |
| Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers | |
| Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers in ballast | |
| Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers | |
| Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for ballastless tracks | |
| Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel | |
| Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track. | |
| Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track | |
| Railway Applications - Track - Performance requirements for fastening systems - Part 7: Fastening systems for switches and crossings, check rails, insulated rail joints and rail expansion devices | |
| Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossing and check rails | |
| Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails | |
| Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads (Endorsed by AENOR in October of 2006.) | |
| Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads | |
| Railway applications - Track- Performance requirements for fastening systems - Part 1: Definitions. | |
| Railway applications - Track- Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers. | |
| Railway applications - Track- Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers. | |
| Requirements for sleeping bags. | |
| Requirements for sleeping bags | |
| Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification | |
| Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification. | |
| Respiratory protective devices - List of equivalent terms | |
| RESPIRATORY PROTECTIVE DEVICES. FULL FACE MASKS FOR SPECIAL USE. REQUIREMENTS, TESTING, MARKING. | |
| RESPIRATORY PROTECTIVE DEVICES. LIST OF EQUIVALENT TERMS. | |
| Respiratory therapy equipment - Part 1: Nebulizing systems and their components | |
| Respiratory therapy equipment - Part 2: Tubing and connectors. | |
| Respiratory therapy equipment - Part 2: Tubing and connectors | |
| Respiratory therapy equipment - Part 3: Air entrainment devices. | |
| Respiratory therapy equipment - Part 3: Air entrainment devices | |
| Respiratory therapy equipment. Part 1: Nebulizing systems and their components. | |
| Round and sawn timber - Nomenclature of timbers used in Europe | |
| Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification | |
| Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification | |
| Rubber hoses and hose assemblies for asphalt and bitumen - Specification. | |
| Rubber hoses and hose assemblies for asphalt and bitumen - Specification | |
| Rubber hoses and hose assemblies for aviation fuel handling - Specification | |
| RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING. SPECIFICATION. | |
| RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING. SPECIFICATION. | |
| Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements | |
| Safety and control devices for gas burners and gas burning appliances - General requirements | |
| SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES. GENERAL REQUIREMENTS. | |
| Safety and control devices for gas burners and gas-burning appliances - General requirements | |
| Shutters and blinds - Measurement of operating force - Test methods | |
| Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes | |
| Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes | |
| Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods | |
| Stationary source emissions . Determination fo the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuos flame ionisation detector method. | |
| Surface active agents - Determination of amide nitrogen content - Potentiometric titration. | |
| Surface active agents - Determination of amide nitrogen content - Potentiometric titration | |
| Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification | |
| Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-fr ozen food and ice cream - Periodic verification | |
| Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for external thermal insulation composite kits with renders (ETIC kits) | |
| Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) | |
| Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes | |
| Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) | |
| Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) (Endorsed by Asociación Española de Normalización in January of 2019.)... | |
| Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) | |
| Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) | |
| Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | |
| Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification | |
| Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification | |
| THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING. | |
| Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying | |
| Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-fr ozen food and ice cream - Tests, performance, suitability | |
| Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability | |
| Thermoplastic tanks made from blow or rotational moulded polyethylene - Tanks for the above ground storage of chemicals - Requirements and test methods | |
| Water quality - Determination of mercury by atomic fluorescence spectrometry. | |
| Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials | |
| Wood flooring - Mosaic parquet elements. | |
| Wood flooring - Multi-layer parquet elements. | |
| Wood-flooring and parquet - Multi-layer parquet elements |
| << Prev | Next >> |