AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure | |
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds | |
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes | |
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates | |
| Agricultural and forestry machinery - Seed drills - Safety | |
| Agricultural and forestry machinery - Solid fertilizer distributors - Safety | |
| Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications | |
| Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings | |
| Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings | |
| Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications | |
| Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Part 2: Plates and sheets | |
| BDS: FIXED POWER RESISTORS. CAPABILITY APPROVAL. (Endorsed by AENOR in December of 1996.) | |
| BDS: LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS. (Endorsed by AENOR in December of 1996.) | |
| Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements | |
| Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods | |
| Bitumen and bituminous binders - Framework specification for polymer modified bitumens | |
| Bitumen and bituminous binders - Specification framework for polymer modified bitumens | |
| Blank detail specification: Fixed low power film resistors (Endorsed by AENOR in July of 2008.) | |
| Blank Detail Specification: Fixed low power film surface mount (SMD) resistors (Endorsed by AENOR in July of 2009.) | |
| Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors (Endorsed by AENOR in November of 2002.) | |
| BLANK DETAIL SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (ASSESSMENT LEVEL P) (Endorsed by AENOR in May of 1996.) | |
| Blank Detail Specification: Fixed low power non-wire wound resistors (Assessment level S). (Endorsed by AENOR in June of 2001.) | |
| BLANK DETAIL SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND SURFACE MOUNTING (SMD) RESISTORS. (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIRE WOUND SURFACE MOUNTING (SMD) RESISTORS (Endorsed by AENOR in October of 1998.) | |
| Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors (Endorsed by AENOR in May of 2015.) | |
| Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| BLANK DETAIL SPECIFICATION: FIXED POWER RESISTORS (ASSESSMENT LEVEL H) (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED POWER RESISTORS (ASSESSMENT LEVEL M) (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED POWER RESISTORS (ASSESSMENT LEVEL S) (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED POWER RESISTORS (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAILS SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (ASSESSMENT LEVEL M) (Endorsed by AENOR in May of 1996.) | |
| BLANK DETAILS SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (ASSESSMENT LEVELS SB AND SC) (Endorsed by AENOR in May of 1996.) | |
| Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements | |
| Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 2: Test method for thermal output | |
| Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output | |
| Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography | |
| Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides | |
| Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides | |
| Chemicals used for treatment of water intended for human consumption - Modified starches | |
| Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammo nium chloride) | |
| Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethyl ammonium chloride) | |
| Chemicals used for treatment of water intended for human consumption - Sodium alginate | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. ANIONIC AND NON-IONIC POLYACRYLAMIDES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CATIONIC POLYACRYLAMIDES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. MODIFIED STARCHES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POLY (DIALLYDIMETHYLAMMON IUM CHLORIDE). | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POLYAMINES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM ALGINATE. | |
| Chemicals used for water treatment intended for human consumption - Polyamines | |
| Child use and care articles - Baby bouncers - Safety requirements and test methods | |
| Child use and care articles - Soothers for babies and young children - Safety requirements and test methods | |
| Child use and care articles. Soothers for babies and young children. Part 1: General safety requirements and product information. | |
| Child use and care articles. Soothers for babies and young children. Part 2: Mechanical requirements and tests. | |
| Child use care articles. Soothers for babies and young children. Part 3: Chemical requirements and tests. | |
| Copper and copper alloys - European numbering system | |
| CORROSION PROTECTION OF METALS. ELECTRODEPOSITED COATINGS. METHOD OF SPECIFYING GENERAL REQUIREMENTS. | |
| Covering - Determination of fire protection ability | |
| Coverings - Determination of fire protection ability | |
| Curtain Walling - Impact resistance - Performance requirements | |
| Decorative oil lamps - Safety requirements and test methods. | |
| Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods | |
| Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods | |
| Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods | |
| Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by AENOR in January of 2014.) | |
| Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by AENOR in September of 2011.) | |
| Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by Asociación Española de Normalización in June of 2019.) | |
| Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads (Endorsed by AENOR in January of 2014.)... | |
| Detail specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads (Endorsed by AENOR in July of 2008.)... | |
| Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 (Endorsed by AENOR in January of 2008.) | |
| Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 (Endorsed by AENOR in January of 2011.) | |
| Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 (Endorsed by AENOR in July of 2013.) | |
| Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 (Endorsed by AENOR in January of 2008.) | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 (Endorsed by AENOR in January of 2014.) | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 (Endorsed by AENOR in January of 2008.) | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 (Endorsed by AENOR in January of 2011.) | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 (Endorsed by AENOR in January of 2014.) | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Detail specification: Fixed low power non wire-wound high stability surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by AENOR in July of 2005.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 (Endorsed by AENOR in November of 2002.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 - Revised resistance changes for substrate bending test... | |
| Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 (Endorsed by AENOR in August of 2003.) | |
| Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 (Endorsed by AENOR in November of 2002.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 1; 2 (Endorsed by AENOR in November of 2002.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 1; 2 - New style of RR 5025M (Endorsed by AENOR in August of... | |
| Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 (Endorsed by AENOR in June of 2005.) | |
| Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 (Endorsed by AENOR in May of 2015.) | |
| Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds | |
| Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds | |
| Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds | |
| Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds | |
| Dock levellers - Safety requirements | |
| DOCK LEVELLERS. | |
| Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests | |
| Durability of wood and wood-based products - Performance criteria for curative wood preservatives as determined by biological tests | |
| Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization (Endorsed by AENOR in June of 2016.) | |
| Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 2: Chloride extraction | |
| Fat and oil derivates - Fatty acid methyl ester (FAME) - Determination of acid value | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) | |
| Fat and oil derivatives - Fatty Acid Methyl Esters - Determination of methanol content | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of ester and linolenic acid methyl ester contents | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of free and total glycerol and mono-, di, triglyceride contents. Reference method | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of free glycerol content | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of iodine value | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of methanol content | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of oxidation stability (accelerated oxidation test) | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of potasium content by atomic absorption spectrometry | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of sodium content by atomic absorption spectrometry | |
| Fireworks - - Part 22: Mines - Specification and test methods | |
| Fireworks - Part 10: Double Bangers - Specification and test methods | |
| Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods | |
| Fireworks - Part 13: Flash pellets - Specification and test methods | |
| Fireworks - Part 15: Fountains - Specification and test methods | |
| Fireworks - Part 17: Ground spinners - Specification and test methods | |
| Fireworks - Part 18: Hand-held fountains - Specification and test methods | |
| Fireworks - Part 19: Hand-held sparklers - Specification and test methods | |
| Fireworks - Part 1: Terminology | |
| Fireworks - Part 20: Jumping crackers - Specification and test methods | |
| Fireworks - Part 21: Jumping ground spinners - Specification and test methods | |
| Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods | |
| Fireworks - Part 24: Novelty matches - Specification and test methods | |
| Fireworks - Part 25: Party Poppers - Specification and test methods | |
| Fireworks - Part 27: Rockets - Specification and test methods | |
| Fireworks - Part 28: Roman candles - Specification and test methods | |
| Fireworks - Part 29: Serpents - Specification and test methods | |
| Fireworks - Part 2: Categorisation. | |
| Fireworks - Part 2: Categorisation | |
| Fireworks - Part 31: Shell-in-mortars - Specification and test methods | |
| Fireworks - Part 33: Spinners - Specification and test methods | |
| Fireworks - Part 34: Table bombs - Specification and test methods | |
| Fireworks - Part 35: Throwdowns - Specification and test methods | |
| Fireworks - Part 36: Wheels - Specification and test methods | |
| Fireworks - Part 38: Shot tubes - Specification and test methods | |
| Fireworks - Part 3: Aerial wheels - Specification and test methods | |
| Fireworks - Part 4: Bangers and banger batteries - Specification and test methods | |
| Fireworks - Part 5: Batteries and combinations - Specification and test methods | |
| Fireworks - Part 6: Bengal flames - Specification and test methods | |
| Fireworks - Part 7: Bengal matches - Specification and test methods | |
| Fireworks - Part 8: Bengal sticks - Specification and test methods | |
| Fireworks - Part 9: Crackling granules - Specification and test methods | |
| Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics | |
| Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method... | |
| Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with... | |
| Foodstuffs - Determination of folate by microbiological assay | |
| Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up | |
| Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up | |
| Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion | |
| Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion | |
| Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography | |
| Foodstuffs - Determination of vitamin B1 by HPLC | |
| Foodstuffs - Determination of vitamin B2 by high performance liquid chromatography | |
| Foodstuffs - Determination of vitamin B2 by HPLC | |
| Foodstuffs - Determination of vitamin B6 by high performance chromatography | |
| Foodstuffs - Determination of vitamin B6 by HPLC | |
| Foodstuffs - Determination of vitamin B6 by microbiological assay | |
| Foodstuffs - Determination of vitamin C by HPLC | |
| Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up. | |
| Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with immunoaffinity column clean-up. | |
| Foodstuffs. Determination of trace elements. Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing | |
| Foodstuffs. Determination of vitamin B1 (thiamin) by HPLC | |
| FOODSTUFFS. DETERMINATION OF VITAMIN B2 BY HPLC. | |
| FOODSTUFFS. DETERMINATION OF VITAMIN K1 BY HPLC. | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output... | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of... | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity | |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output | |
| GENERIC SPECIFICATION: FIXED RESISTORS. (Endorsed by AENOR in January of 1996.) | |
| Geosynthetic barriers - Determination of permeability to liquids | |
| Geosynthetics - Determination of burst strength | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids. (ISO/TR 12960:1998, modified) | |
| Glass in furniture - Test methods | |
| High performance industrial helmets (Endorsed by AENOR in December of 2012.) | |
| High performance industrial helmets (Endorsed by AENOR in November of 2012.) | |
| High performance industrial helmets | |
| High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods (Endorsed by AENOR in March of... | |
| High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods (Endorsed by AENOR in March of... | |
| High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods (Endorsed by AENOR in August of 2006.) | |
| High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods | |
| High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods (Endorsed by AENOR in September of 2006.) | |
| High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods | |
| Holders for lifebuoys. | |
| Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems. | |
| Inlet valves for flushing cisterns with internal overflow | |
| Irrigation techniques - Water application intensity - Calculation principles and measurement methods | |
| Irrigation techniques. Connection and control accesories for use in irrigation systems. Technical characteristics and testing. | |
| Laboratory furniture - Recommendations for design and installation | |
| Lead and lead alloys - Scraps - Terms and definitions. | |
| Lifebuoys - Requirements, tests (Endorsed by Asociación Española de Normalización in December of 2025.) | |
| Lifebuoys. Requirements, tests. | |
| Liming materials - Denominations, specifications and labelling | |
| Liming materials - Description and minimum requirements | |
| Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method | |
| Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method | |
| LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment | |
| LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction | |
| Machine tools - Safety - Guillotine shears | |
| Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment | |
| Natural stone test methods - Determination of resistance to ageing by salt mist | |
| Natural stone test methods - Determination of resistance to ageing by thermal shock | |
| Natural stone test methods - Determination of rupture energy | |
| Natural stone test methods - Determination of the abrasion resistance | |
| Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) | |
| Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze | |
| Non-active medical devices. Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze | |
| Non-destructive testing - Ultrasonic thickness measurement. | |
| Non-destructive testing - Ultrasonic thickness measurement | |
| Non-destructive testing- Qualification of radiographic film digitisation systems- Part 2: Minimum requirements. | |
| Non-destructive testing- Qualification of radiographic film digitisation systems. Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control. | |
| Office furniture - Storage furniture - Part 2: Safety requirements | |
| Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure | |
| Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts | |
| Oil and fat derivatives. Fatty Acid Methyl Esters (FAME). Determination of acid value. | |
| Ophthalmic optics - Specifications for ready-to-wear spectacles. | |
| Ophthalmic optics - Specifications for ready-to-wear spectacles | |
| Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop | |
| Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide. | |
| Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions. | |
| Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide | |
| Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction | |
| Packaging - Paper and paperboard packaging - Design of cartons | |
| Packaging. Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer. | |
| Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method | |
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified) (Endorsed by AENOR in March of 2004.) | |
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) (Endorsed by AENOR in August of 2011.) | |
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) (Endorsed by AENOR in June of 2015.) | |
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000 modified) (Endorsed by AENOR in April of 2006.) | |
| Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines (ISO 13847:2000 modified) (Endorsed by AENOR in March of 2002.) | |
| Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method | |
| Plastics and rubber machines - Two roll mills - Safety requirements | |
| Plastics and rubber machines - Two-roll mills - Safety requirements | |
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE. UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM. | |
| Postal services - Address databases - Part 1: Components of postal addresses | |
| Postal services - Quality of service - Complaints handling principles (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Postal services - Quality of service - Complaints handling principles | |
| Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system | |
| Postal services. Quality of service. Measurements of Complaints and Redress Procedures | |
| Pressure relief valves for LPG tanks. Ancillary Equipment. | |
| Pressure relief valves for LPG tanks. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete | |
| Protective clothing - Garments for protection against cool environments (Endorsed by Asociación Española de Normalización in February of 2018.) | |
| Protective clothing - Garments for protection against cool environments (Endorsed by Asociación Española de Normalización in June of 2023.) | |
| Protective clothing - Garments for protection against cool environments | |
| Protective clothing - Performance requirements and tests methods for protective clothing against infective agents | |
| Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods | |
| Railway applications - Aerodynamics - Part 4: Requirements and assessment procedures for aerodynamics on open track | |
| Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track | |
| Railway applications - Aerodynamics - Part 5: Requirements and assessment procedures for aerodynamics in tunnels | |
| Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels | |
| Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for working | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail | |
| Railway applications. Aerodynamics. Part 1: Symbols and units. | |
| Railway applications. Aerodynamics. Part 2: Aerodynamics on open track. | |
| Railway applications. Aerodynamics. Part 3: Aerodynamics in tunnels. | |
| Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous Diver | |
| Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Part 1: Level 1 - Supervised Diver | |
| Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Part 3: Level 3 - Diver Leader | |
| Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation | |
| Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements | |
| Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements | |
| Reinforcements - Specification for textile glass rovings - Part 1: Designation. | |
| Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements. | |
| Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements. | |
| Resilient floor coverings - Specification for floor panels for loose laying. | |
| Resilient floor coverings - Specification for floor panels for loose laying | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF RESISTANCE TO STUBBED AND BURNING CIGARETTES. | |
| Resilient, textile and laminate floor coverings - Essential characteristics | |
| Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics | |
| Respiratory equipment - Self-contained re-breathing diving apparatus | |
| Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking | |
| RESPIRATORY PROTECTIVE DEVICES. COMPRESSED AIR LINE BREATHING APPARATUS FOR USE WITH A FULL FACE MASK, HALF MASK OR MOUTHPIECE ASSEMBLY. REQUIREMENTS, TESTING, MARKING. | |
| RESPIRATORY PROTECTIVE DEVICES. GAS FILTERS AND COMBINED FILTERS. REQUIREMENTS, TESTING AND MARKING. | |
| RESPIRATORY PROTECTIVE DEVICES. HALF MASKS AND QUARTER MASKS. REQUIREMNTS, TESTING, MARKING. | |
| RUBBER AND PLASTICS MACHINES. TWO ROILL MILLS. SAFETY REQUIREMENTS. | |
| Safety of machine tools - Transfer and special-purpose machines | |
| Safety of machine tools. Transfer and special purpose machines. | |
| Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages | |
| Sectional specification: Fixed low power film resistors (Endorsed by AENOR in June of 2008.) | |
| Sectional Specification: Fixed low power non-wire wound resistors (Endorsed by AENOR in December of 2001.) | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (Endorsed by AENOR in July of 1998.) | |
| Sectional specification: Fixed low power surface mount (SMD) resistors (Endorsed by AENOR in April of 2004.) | |
| Sectional Specification: Fixed low power surface mounting (SMD) resistors (Endorsed by AENOR in December of 2001.) | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER SURFACE MOUNTING (SMD) RESISTORS. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER SURFACE MOUNTING (SMD) RESISTORS. (Endorsed by AENOR in June of 1999.) | |
| Sectional Specification: Fixed power resistors (Endorsed by AENOR in December of 2001.) | |
| Space engineering - Space environment. (Endorsed by AENOR in April of 2002.) | |
| Space engineering . Software. | |
| Space engineering standards - Fracture control (Endorsed by AENOR in June of 2004.) | |
| Space product assurance - Flammability testing for the screening of space materials (Endorsed by AENOR in April of 2002.) | |
| Space product assurance - Material selection for controlling stress-corrosion cracking. | |
| Space product assurance - Measurement of the peel and pull-off strength of coating and finishes using pressure-sensitive tapes. | |
| Space product assurance - Nonconformance control system. | |
| Space product assurance - The control of limited shelf-life materials (Endorsed by AENOR in August of 2002.) | |
| Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment. | |
| Space product assurance - Thermal cycling test for the screening of space materials and processes. | |
| Space product assurance - Thermal vacuum outgassing test for the screening of space materials (Endorsed by AENOR in April of 2002.) | |
| Space project management - Organization and conduct of reviews (Endorsed by AENOR in April of 2002.) | |
| Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above | |
| SS: FIXED POWER RESISTORS. CAPABILITY APPROVAL. (Endorsed by AENOR in December of 1996.) | |
| Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ and for installation underground - Design and... | |
| Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground. Design and manufacture. | |
| Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods | |
| Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives | |
| Structural Adhesives - Determination of the pot life (working life) of multicomponent adhesives | |
| Surface active agents - Foaming power and antifoaming power - Turbine stirring method. | |
| Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction | |
| Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction. | |
| Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels | |
| Tanks for transport of dangerous goods - Digital interface for the product recognition device (Endorsed by AENOR in January of 2009.) | |
| Tanks for transport of dangerous goods - Digital interface for the product recognition device. | |
| Tanks for transport of dangerous goods - Digital interface for the product recognition device | |
| Testing of textiles - Evaluation of the action of microfungi | |
| Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat | |
| Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition. | |
| Textiles - Laundry processed textiles - Biocontamination control system. | |
| Textiles - Laundry processed textiles - Biocontamination control system | |
| TEXTILES. DETERMINATION OF PH OF AQUEOUS EXTRACT. | |
| Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation (Endorsed by AENOR in June of 2010.)... | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products (Endorsed by AENOR in June of 2010.) | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products | |
| Thermoplastic and flexible metal pipework for underground installation at petrol filling stations | |
| Timber stairs - Terminology (Endorsed by AENOR in September of 2006.) | |
| Timber stairs - Terminology | |
| Timber structures - Glued laminated timber - Requirements | |
| Timber structures - Glued laminated timber and glued solid timber - Requirements | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing (Endorsed by AENOR in January of 2006.) | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for type testing | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control (Endorsed by AENOR in January of 2006.) | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems (Endorsed by AENOR in April of... | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems (Endorsed by AENOR in February of... | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems (Endorsed by AENOR in July of... | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems (Endorsed by AENOR in November of... | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine Grading -Grading machine settings for machine controlled systems (Endorsed by AENOR in January of 2006.)... | |
| Touch and close fasteners - Behaviour of slit selvedges | |
| Touch and close fasteners. Cycling procedure for subsequent testing. | |
| TOUCH AND CLOSE FASTENERS. DETERMINATION OF CURVATURE. | |
| Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG). Alternative design and construction. | |
| Unshaped refractory materials - Part 7: Tests on pre-formed shapes | |
| Unshaped refractory products - Part 1: Introduction and classification | |
| Unshaped refractory products - Part 2: Sampling for testing | |
| Unshaped refractory products - Part 3: Characterization as received | |
| Unshaped refractory products - Part 4: Determination of consistency of castables | |
| Unshaped refractory products - Part 5: Preparation and treatment of test pieces | |
| Unshaped refractory products - Part 6: Measurement of physical properties | |
| Unshaped refractory products - Part 8: Determination of complementary properties | |
| Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures | |
| Valves for natural gas transportation in pipelines - Performance requirements and tests | |
| Valves for natural gas transportation in pipelines. Performance requirements and tests. | |
| Ventilation for buildings - Performance measurement and checks for residential ventilation systems | |
| Ventilation for buildings. Performance testing and installation checks of residential ventilation systems | |
| Water application intensity - Calculation principles and measurement methods | |
| Water conditioning equipment inside buildings. Electrolytic treatment systems with aluminium anodes. Requirements for performance and safety, and testing | |
| Water meters - Part 1: General requirements | |
| Water meters - Part 2 : Installation and conditions of use | |
| Water meters - Part 2: Installation and conditions of use | |
| Water meters - Part 3 : Test methods and equipment | |
| Water meters - Part 3: Test methods and equipment | |
| Water meters - Part 4: Additional functionalities | |
| Water quality - Sampling of fish with electricity | |
| WC and urinal flushing cisterns | |
| Wood flooring - Solid softwood floor boards | |
| Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking. | |
| Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking | |
| Workplace atmospheres - Determination of airborne endotoxins | |
| Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents | |
| Workplace exposure - Quantitative measurement of airborne endotoxins |
| << Prev | Next >> |