AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements | |
| Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature | |
| Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) | |
| Adhesives for floor coverings - Requirements for mechanical and electrical performance | |
| Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes | |
| Adhesives for non-structural wood applications - Test method and requirements for resistance to static load | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique (Endorsed by AENOR in January of 2008.) | |
| Advanced technical ceramics - Terms, definitions and abbreviations (Endorsed by AENOR in December of 2009.) | |
| Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis (Endorsed by AENOR in December of 2004.) | |
| Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis (Endorsed by Asociación Española de Normalización in April of 2023.) | |
| Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts | |
| Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods | |
| Aluminium and aluminium alloys. chemical analysis. Sampling from metal melts. | |
| Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components. | |
| Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods. | |
| Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence | |
| Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence | |
| Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence | |
| Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence | |
| Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers | |
| Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) | |
| Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods | |
| Bitumen and bituminous binders - Characterization of perceptible properties | |
| Bitumen and bituminous binders - Determination of needle penetration | |
| Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving | |
| Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method | |
| Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method | |
| BITUMEN AND BITUMINOUS BINDERS. CHARACTERIZACION OF PERCEPTIBLE PROPERTIES. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF NEEDLE PENETRATION. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF PARTICLE POLARITY OF BITUMEN EMULSIONS. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF RECORVERED BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF RESIDUE ON SIEVING OF BITUMEN EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF SOFTENING POINT. RING AND BALL METHOD. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS. AZEOTROPIC DISTILLATION METHOD. | |
| Bitumens and bituminous binders - Determination of needle penetration | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Beads in envelopes) | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Beads in solid glass or vitreous enamel) | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Disk type) | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Rod type) | |
| Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods | |
| Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing | |
| Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods | |
| Brazing - Guidance on the application of brazed joints | |
| Cement - Composition, specifications and conformity criteria for very low heat special cements | |
| Characterization of waste - Calculation of dry matter by determination of dry residue or water content | |
| Characterization of waste - Determination of hydrocarbon content by gravimetry | |
| Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1, step 1) | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action -... | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action... | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on non-porous surfaces without mechanical action -... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase... | |
| Chemicals used for treatment of water intended for human consumption - Ammonium chloride | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. AMMONIUM CHLORIDE. | |
| Child care articles - Child seats for cycles - Safety requirements and test methods | |
| Child care articles - Drinking equipment - Safety requirements and test methods | |
| Child use and care articles - Child seats for cycles - Safety requirements and test methods | |
| Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests | |
| Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests | |
| Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests | |
| Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing | |
| Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners (Endorsed by AENOR in August of 2006.) | |
| Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners | |
| Chimneys - Freeze-thaw resistance test method for chimney products | |
| Cold applied joint sealants - Part 1:Test method for the determination of rate of cure | |
| Cold applied joint sealants - Part 2:Test method for the determination of tack free time | |
| Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties | |
| Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel | |
| Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis | |
| Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids | |
| Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame | |
| Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation | |
| Cold applied joint sealants - Test method - Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals | |
| Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure | |
| Cold applied joint sealants - Test methods - Part 2: Determination of tack free time | |
| Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties | |
| Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals | |
| Cold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis | |
| Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame | |
| Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation | |
| Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants | |
| Cranes - Manually controlled load manipulating devices | |
| Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements | |
| Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements | |
| Cryogenic vessels. Static non-vacuum insulated vessels. Part 1: Fundamental requirements | |
| Cryogenic vessels. Static non-vacuum insulated vessels. Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels. Static non-vacuum insulated vessels. Part 3: Operational requirements | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : briquetting pitch - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : carbon binder pitch - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : coating tar - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : impregnating pitch - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : painting tar - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : refractory binders - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : road tars - Characteristics and test methods | |
| Dimensions of bed blankets | |
| Diving suits - Part 1: Wet suits - Requirements and test methods | |
| Diving suits - Part 2: Dry suits - Requirements and test methods | |
| Diving suits - Part 3: Actively heated or cooled suit systems and components - Requirements and test methods | |
| Diving suits - Part 3: Actively heated or cooled suits (systems) - Requirements and test methods | |
| Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods | |
| Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity. | |
| Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity | |
| Execution of special geotechnical works - Micropiles (Endorsed by AENOR in August of 2006.) | |
| Execution of special geotechnical works - Micropiles | |
| Explosion suppression systems | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption | |
| Foam producing solutions for leak detection on gas installations | |
| Foodstuffs - Determination of domoic acid in mussels by HPLC | |
| Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection | |
| Foodstuffs - Determination of fumonisin B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean up. | |
| Foodstuffs - Determination of patulin in clear and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up | |
| Foodstuffs - Determination of trace elements - Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion | |
| Fume cupboards - Part 1: Vocabulary | |
| Fume cupboards - Part 2: Safety and performance requirements | |
| Fume cupboards - Part 3: Type test methods | |
| Fume cupboards - Part 4: On-site test methods | |
| Fume cupboards - Part 6: Variable air volume fume cupboards | |
| Fume cupboards - Part 7: Fume cupboards for high heat and acidic load | |
| Fume cupboards - Part 8: Fume cupboards for work with radioactive materials | |
| Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar) | |
| Gas-loaded accumulators for fluid power applications | |
| Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers | |
| Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass | |
| Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description | |
| Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| GS: THERMISTORS. (Endorsed by AENOR in November of 1996.) | |
| Gypsum board products from reprocessing - Definitions, requirements and test methods | |
| Gypsum elements for suspended ceilings - Definitions, requirements and test methods | |
| Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods | |
| Heat meters - Part 1: General requirements | |
| Heat meters - Part 2: Constructional requirements | |
| Heat Meters - Part 3: Data exchange and interfaces | |
| Heat meters - Part 4: Pattern approval tests | |
| Heat meters - Part 5: Initial verification tests | |
| Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Heat meters. Part 1: General requirements. | |
| Heat meters. Part 2: Constructional requirements. | |
| HEAT METERS. PART 3: DATA EXCHANGE AND INTERFACES. | |
| Heat meters. Part 4: Pattern approval tests. | |
| HEAT METERS. PART 5: INITIAL VERIFICATION TEST. | |
| Heat meters. Part 5: Initial verification tests. | |
| Heat meters. Part 6: Installation, commissioning, operational monitoring and maintenance. | |
| Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods | |
| Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods. | |
| Heating systems in buildings - Installation and commissioning of water based heating and cooling systems | |
| Heating systems in buildings - Installation and commissioning of water based heating systems | |
| Heating Systems in buildings. Design and installations of direct electrical room heating systems. | |
| Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) | |
| Hexagon bolts with flange with metric fine pitch thread. Small series (ISO 15072:1999 modified) | |
| Hexagon nuts with flange. Fine pitch thread. (ISO 10663:1999 modified) | |
| Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement | |
| Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime | |
| Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag | |
| Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder | |
| Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash | |
| Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils | |
| Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures | |
| Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound mixtures | |
| Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures | |
| Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound mixtures | |
| In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans | |
| Industrial valves - Steel check valves | |
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method | |
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems | |
| Inland navigation vessels - Gangways for passenger vessels - Requirements, tests (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Inland navigation vessels - Gangways for passenger vessels - Requirements, tests | |
| Inland navigation vessels - Installation of berths and loading areas | |
| Inland navigation vessels. Studless anchor chain. Round steel link chain. | |
| Inspection and testing of LPG road tankers | |
| Irrigation techniques - Irrigation hydrants | |
| Irrigation techniques - Meters for irrigation water | |
| Irrigation techniques. Meters for irrigation water | |
| Joint fillers and sealants - Part 1: Specifications for hot applied sealants | |
| Joint fillers and sealants - Part 2: Specifications for cold applied sealants | |
| Joint fillers and sealants - Part 3: Specifications for preformed joint seals (Endorsed by AENOR in August of 2006.) | |
| Joint fillers and sealants - Part 3: Specifications for preformed joint seals | |
| Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants | |
| Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations | |
| Laboratory measurement of noise from waste water installations | |
| Laminated Veneer Lumber (LVL) - Definitions, classification and specifications (Endorsed by AENOR in September of 2006.) | |
| Laminated Veneer Lumber (LVL) - Definitions, classification and specifications | |
| Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather | |
| Leather - Physical and mechanical tests - Determination of fogging characteristics | |
| Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame | |
| Leather - Physical and mechanical tests - Determination of water penetration pressure | |
| Leather - Physical and mechanical tests - Determination of water repellency of garment leather | |
| Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods | |
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method | |
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method | |
| LPG equipment and accessories - Inspection and testing of LPG road tankers | |
| Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order... | |
| Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities | |
| Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content... | |
| Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace (Endorsed by AENOR in August of 2006.) | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace (Endorsed by AENOR in August of... | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 3: UV-Radiation emitted by the sun | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements | |
| Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance (Endorsed by AENOR in September of 2008.) | |
| Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance | |
| Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods | |
| Metal framing components for gypsum board systems - Definitions, requirements and test methods | |
| Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods | |
| Natural stone test methods - Determination of Knoop hardness | |
| Natural stone test methods - Determination of the slip resistance by means of the pendulum tester | |
| Non active surgical implants - Particular requirements for cardiac and vascular implants - Specific requirements for arterial stents | |
| Non controllable backflow preventer with different pressure zones - Family C, type A. | |
| Non destructive testing of welds. Radiographic testing of welded joints. | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 1: HPLC method with solid phase extraction clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 2: HPLC method with gel permeation chromatography clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 3: HPLC method with liquid/liquid-partit ion clean up | |
| Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column | |
| NON-DESTRUCTIVE EXAMINATION OF WELDS. RADIOGRAPHIC EXAMINATION OF WELDED JOINTS. | |
| Non-destructive testing of welds - Radiographic testing of welded joints | |
| Non-fatty food - Determination of N-methylcarbamate residues - Part 1: HPLC-method with SPE clean-up | |
| Packaging - Terminology - Basic terms and definitions. | |
| Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant | |
| Pillar fire hydrants | |
| Plastics and rubber machines - Two-roll mills - Safety requirements (Endorsed by Asociación Española de Normalización in December of 2023.) | |
| Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading. | |
| Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints | |
| Plywood - Calculation method for some mechanical properties | |
| Preformed plasterboard cornices - Definitions, requirements and test methods | |
| Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | |
| Prevention of crime - Urban planning and building design - Part 1: Definition of specific terms | |
| Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina | |
| Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone | |
| Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages (Endorsed by Asociación Española de Normalización in June of 2024.) | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets | |
| Railway applications - Braking - Requirements for the brake system of trains hauled by a locomotive | |
| Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives | |
| Railway applications - Suspension components - Parabolic springs, steel | |
| Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests (Endorsed by AENOR in August of 2006.) | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests | |
| Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (Endorsed by AENOR in September of 2008.) | |
| Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (Endorsed by Asociación Española de Normalización in April of 2021.) | |
| Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking | |
| Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking | |
| Respiratory protective devices - Particle filters - Requirements, testing, marking (Endorsed by Asociación Española de Normalización in April of 2021.) | |
| Respiratory protective devices - Particle filters - Requirements, testing, marking | |
| RESPIRATORY PROTECTIVE DEVICES. PARTICLE FILTERS. REQUIREMENTS, TESTING, MARKING. | |
| Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two | |
| Road marking materials - Premix glass beads | |
| Road marking materials - Road marking performance for road users (Endorsed by AENOR in March of 2009.) | |
| Road marking materials - Road marking performance for road users and test methods | |
| Road marking materials - Road marking performance for road users | |
| ROAD MARKING MATERIALS. DROP ON MATERIALS. GLASS BEADS, ANTISKID AGGREGATES AND MIXTURE OF THE TWO. | |
| ROAD MARKING MATERIALS. PREMIX GLASS BEADS. | |
| ROAD MARKING MATERIALS. ROAD MARKING PERFORMANCE FOR ROAD USERS. | |
| Rotary positive displacement pumps - Performance tests for acceptance (Endorsed by AENOR in August of 2006.) | |
| Rotary positive displacement pumps - Performance tests for acceptance | |
| Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar. | |
| Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar | |
| Sanitary appliances - Communal washing troughs | |
| Sawn timber - Assessment of drying quality | |
| Stainless steel shell boilers | |
| Stainless steel steam boilers | |
| Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V | |
| Stationary source emissions - Quality assurance of automated measuring systems | |
| Step stools | |
| Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods. | |
| Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods | |
| Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing | |
| STERILIZERS FOR MEDICAL PURPOSES. ETHYLENE OXIDE STERILIZERS. REQUIREMENTS AND TEST METHODS. | |
| Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature | |
| Structural adhesives - T-peel test for flexible-to-flexible bonded assemblies. (ISO 11339:1993 Modified) | |
| Structural round timber - Test methods | |
| Structural timber - Wood poles for overhead lines | |
| Surface active agents - Determination of foamability and degree of foamability - Circulation test method | |
| Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method | |
| Surface active agents - Determination of surface tension | |
| SWAP BODIES. SWAP TANKS. DIMENSIONS, REQUIREMENTS, TEST METHODS, OPERATION CONDITIONS. | |
| SYMBOLS FOR TIMBER AND WOOD-BASED PRODUCTS | |
| Textile floor coverings - Classification of machine-made pile rugs and runners | |
| Textile floor coverings - Classification of machine-made rugs and runners | |
| Textile floor coverings - Classification of rugs and runners (Endorsed by Asociación Española de Normalización in January of 2026.) | |
| Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device | |
| Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device | |
| Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the... | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene | |
| Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction | |
| Thermal energy meters - Part 1: General requirements | |
| Thermal energy meters - Part 2: Constructional requirements | |
| Thermal energy meters - Part 4: Pattern approval tests | |
| Thermal energy meters - Part 5: Initial verification tests | |
| Thermal energy meters - Part 5: Intitial verification tests | |
| Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products | |
| Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 1: Specification for the rigid foam spray system before installation | |
| Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification (Endorsed by AENOR in April of 2016.) | |
| Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification (Endorsed by AENOR in August of 2010.) | |
| Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification (Endorsed by AENOR in March of 2013.) | |
| Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation | |
| Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications | |
| Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications | |
| Timber structures - Calculation and verification of characteristic values | |
| Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample | |
| Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners | |
| Timber structures - Structural laminated veneer lumber - Requirements | |
| Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction | |
| Transportable gas cylinders. Inspection and manteinance of cylinder valves at time of periodic inspection of gas cylinders. | |
| Ultrasonic domestic gas meters | |
| Underground fire hydrants | |
| Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes | |
| Ventilation for buildings - Chilled ceilings - Testing and rating | |
| Ventilation for buildings - Ductwork - Measurement of ductwork surface area | |
| Water quality - Determination of epichlorohydrin | |
| Water quality - Guidance for the surveying of aquatic macrophytes in running waters | |
| Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters | |
| Welding consumables. Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification. | |
| WELDING PERSONNEL. APPROVAL TESTING OF WELDING OPERATORS FOR FUSION WELDING AND RESISTANCE WELD SETTERS FOR FULLY MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS. | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets | |
| Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets | |
| Wood flooring - Characteristics, evaluation of conformity and marking | |
| Wood flooring and parquet - Characteristics, evaluation of conformity and marking | |
| Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification | |
| Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification | |
| Wood-based panels - Melamine faced boards for interior uses - Test methods | |
| Wood-based panels - Wood veneer floor covering (Endorsed by AENOR in September of 2006.) | |
| Wood-based panels - Wood veneer floor covering | |
| Wood-based panels - Wood veneer floor coverings | |
| Zinc and zinc alloys. Secondary raw material. |
| << Prev | Next >> |