AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Acetic acid food grade - Product made from materials of non-agricultural origin - Definitions, requirements, marking. | |
| ACETIC ACID FOOD GRADE. PRODUCT MADE FROM MATERIALS OF NON-AGRICULTURAL ORIGIN. DEFINITIONS, REQUIREMENTS, MARKING. | |
| Aggregates for mortar. | |
| Aggregates for mortar | |
| Agricultural machinery - Potato harvesting equipment - Safety | |
| Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety | |
| AGRICULTURAL MACHINERY. POTATOES HARVESTING EQUIPMENT. SAFETY. | |
| AGRICULTURAL MACHINERY. SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT. SAFETY. | |
| Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) | |
| Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore). Part 1: Specifications. | |
| Bituminous mixtures - Material specifications - Part 20: Type Testing (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Material specifications - Part 20: Type Testing | |
| Bituminous mixtures - Material specifications - Part 21: Factory Production Control (Endorsed by AENOR in September of 2006.) | |
| Bituminous mixtures - Material specifications - Part 21: Factory Production Control | |
| Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers | |
| Bituminous mixtures - Material specifications - Part 3: Soft Asphalt | |
| Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt | |
| Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt | |
| Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt | |
| Bituminous mixtures - Material specifications - Part 7: Porous Asphalt | |
| Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt | |
| Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) | |
| BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS A POLYCARBONATE FILM DIELECTRIC. ASSESSMENT LEVEL E (Endorsed by AENOR in June of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS AND A POLYCARBONATE FIL DIELECTRIC. ASSESSMENT LEVEL EZ (Endorsed by AENOR in June of 1998.) | |
| Blank Detail Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric (Endorsed by AENOR in November of 2002.) | |
| BLANK DETAIL SPECIFICATION: FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS. ASSESSMENT LEVEL E (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS. ASSESSMENT LEVEL EZ (Endorsed by AENOR in July of 1998.) | |
| BRAZING - BRAZER APPROVAL. | |
| Brazing. Procedure approval. | |
| Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances | |
| Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners | |
| Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 13: Sash balances | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 15: Rollers for horizontal sliding and hardware for sliding folding windows | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 17: Hardware for Tilt and Slide windows | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 4: Espagnolettes | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction stay) | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 7: Finger catches | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows | |
| Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware | |
| Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware | |
| Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices | |
| Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches | |
| Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware (Endorsed by AENOR in September of 2006.)... | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay) | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware (Endorsed by AENOR in September of 2006.) | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware | |
| Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn | |
| Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held. | |
| Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held | |
| Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats into which a user is positioned | |
| Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn | |
| CATHODIC PROTECTION FOR HARBOUR INSTALLATIONS. | |
| CATHODIC PROTECTION FOR STEEL OFFSHORE FLOATING STRUCTURES. | |
| Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments | |
| Chemicals used for treatment of water intended for human consumption - Acetic acid | |
| Chemicals used for treatment of water intended for human consumption - Ethanol. | |
| Chemicals used for treatment of water intended for human consumption - Ethanol | |
| Chemicals used for treatment of water intended for human consumption - Methanol | |
| Chemicals used for treatment of water intended for human consumption. Acetic acid. | |
| Chemicals used for treatment of water intended for human consumption. Methanol. | |
| COPPER AND COPPER ALLOYS - DETERMINATION OF RESIDUAL STRESSES IN THE BORDER AREA OF SLIT STRIP. | |
| Copper and copper alloys - Hot-dip tinned strip. | |
| Copper and copper alloys - Hot-dip tinned strip | |
| Covering thermoplastic films for use in agriculture and horticulture. | |
| Crane - Safety - Non-fixed load lifting attachments | |
| Crane. Safety. Non-fixed load lifting attachments | |
| Cranes - Equipment - Part 1: Electrotechnical equipment | |
| Cranes - Equipment - Part 2: Non-electrotechnical equipment | |
| Cranes - Non-fixed load lifting attachments | |
| Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment (Endorsed by AENOR in July of 2006.) | |
| Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment (Endorsed by AENOR in May of 2006.) | |
| Cranes - Safety - Design - Requirements for equipment | |
| Cranes - Safety - Hand powered cranes | |
| Cranes - Safety - Hand powered lifting equipment | |
| Cranes - Safety - Non-fixed load lifting attachments | |
| Curtain walling - Resistance to wind load - Performance requirements. | |
| Curtain walling - Resistance to wind load - Performance requirements | |
| Curtain walling - Terminology | |
| DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. | |
| Dial thermometers | |
| Dimensional classification of round timber | |
| DIMENSIONAL CLASSIFICATION. PART 1: HARDWOOD ROUND TIMBER. | |
| DIMENSIONAL CLASSIFICATION. PART 2: SOFTWOOD ROUND TIMBER. | |
| Domestic gas-fired forced convection air heaters for space heating with fan-assisted burners not exceeding a net heat input of 70 kW. | |
| DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW | |
| DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70KW | |
| Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements | |
| Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in production standards with the aid of EN 563. | |
| Feather and down - Specification for feather and down filled bedding articles | |
| Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration | |
| FRUIT AND VEGETABLE JUICES. DETERMINATION OF TOTAL SULFUR DIOXIDE BY DISTILLATION. | |
| Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries | |
| Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries... | |
| Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption | |
| Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption | |
| Gas-fired domestic appliances producing hot water - Part 3: Assessment of energy consumption of solar supported gas-fired appliances | |
| Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity | |
| Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas-fired appliances combined with electrical heat pump | |
| Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps | |
| Gas-fired domestic appliances producing hot water - Part 7: Assessment of energy consumption of combination boilers equipped with a passive flue heat recovery device | |
| GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions | |
| GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria | |
| GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance | |
| GRP tanks and vessels for use above ground - Part 3: Design and workmanship | |
| GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance | |
| Hardwood round timber - Qualitative classification - Part 1: Oak and beech | |
| Hardwood round timber - Qualitative classification - Part 2: Poplar | |
| HARDWOOD ROUND TIMBER. QUALITATIVE CLASSIFICATION. PART 1: OAK AND BEECH. | |
| HARDWOOD ROUND TIMBER. QUALITATIVE CLASSIFICATION. PART 2: POPLAR. | |
| HARDWOOD ROUND TIMBER. QUALITATIVE CLASSIFICATION. PART 3: ASH AND MAPLES AND SYCAMORE. | |
| Internal blinds - Performance requirements including safety | |
| Ladders - Part 1: Terms, types, functional sizes (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Ladders - Part 1: Terms, types, functional sizes | |
| Ladders - Part 2: Requirements, testing, marking (Endorsed by Asociación Española de Normalización in March of 2018.) | |
| Ladders - Part 2: Requirements, testing, marking (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Ladders - Part 2: Requirements, testing, marking | |
| Ladders - Part 3: Marking and user instructions (Endorsed by Asociación Española de Normalización in March of 2018.) | |
| Ladders - Part 3: Marking and user instructions (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Ladders - Part 3: User Instructions | |
| Ladders - Part 4: Single or multiple hinge-joint ladders (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Ladders - Part 4: Single or multiple hinge-joint ladders (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Ladders - Part 4: Single or multiple hinge-joint ladders | |
| Ladders - Part 6: Telescopic ladders (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Ladders - Part 6: Telescopic ladders (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Ladders - Part 6: Telescopic ladders | |
| Ladders - Part 7: Mobile ladders with platform | |
| LADDERS. REQUIREMENTS, TESTING, MARKING. | |
| LADDERS. TERMS; TYPES; FUNCTIONAL SIZES. | |
| Leak detection systems - Part 1: General principles | |
| Leak detection systems - Part 2: Pressure and vacuum systems | |
| Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems | |
| Leak detection systems - Part 3: Liquid systems for tanks | |
| Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks | |
| Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces | |
| Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems | |
| Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems | |
| Leak detection systems - Part 5: Tank gauge leak detection systems | |
| Leak detection systems - Part 6: Sensors in monitoring wells | |
| Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets | |
| Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets | |
| LIQUID PETROLEUM PRODUCTS. DETERMINATION OF NICKEL AND VANADIUM CONTENT. ATOMIC ABSORPTION SPECTROMETRIC METHOD. | |
| LIQUID PETROLEUM PRODUCTS. UNLEADED PETROL. DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY USING COLUMN SWITCHING | |
| LPG equipment and accesories. Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings | |
| LPG equipment and accessories - LPG tanks and drums - Disposal | |
| LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings | |
| LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction | |
| LPG tanks - Disposal | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods... | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 2: Determination of terephthalic acid in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 3: Determination of acrylonitrile in food and food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 5: Determination of vinylidene chloride in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics | |
| Metallic and other inorganic coatings - Definitions and conventions concerning porosity | |
| Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test | |
| Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method | |
| Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method | |
| Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method (Endorsed by AENOR in August of 2006.) | |
| Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method | |
| Moisture content of a piece of sawn timber. Part 1: Determination by oven dry method. | |
| Moisture content of a piece of sawn timber. Part 2: Estimation by electrical resistance method. | |
| Natural stone test methods - Determination of flexural strength under constant moment | |
| Natural stone test methods- Determination of flexural strength under constant moment. | |
| Natural stone test methods. Determination of flexural strength under constant moment. | |
| NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD. | |
| Non destructive testing. Leak testing. Calibration of reference leaks for gases. | |
| Non-destructive testing - Leak testing - Pressure change method | |
| Non-destructive testing - Leak testing - Tracer gas method | |
| NON-FATTY FOODS - DETERMINATION OF BROMIDE RESIDUES - PART 1: DETERMINATION OF TOTAL BROMIDE AS INORGANIC BROMIDE | |
| NON-FATTY FOODS - DETERMINATION OF BROMIDE RESIDUES - PART 2: DETERMINATION OF INORGANIC BROMIDE | |
| PACKAGING - PACKAGING AND THE ENVIRONMENT - TERMINOLOGY. | |
| PACKAGING - SMALL LOAD CARRIER SYSTEMS - PART 1: COMMON REQUIREMENTS AND TEST METHODS. | |
| PACKAGING - SMALL LOAD CARRIER SYSTEMS - PART 2: COLUMN STACKABLE SYSTEM (CSS). | |
| PACKAGING - SMALL LOAD CARRIER SYSTEMS - PART 3: BOND STACKABLE SYSTEM (BSS). | |
| PERSONAL EYE-PROTECTION. EYE PROTECTORS FOR SNOWMOBILE USERS. | |
| Plastics - Thermoplastic covering films for use in agriculture and horticulture | |
| Powered rescue tools for fire and rescue service use - safety and performance requirements | |
| Precast concrete products - Street furniture and garden products | |
| Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods | |
| Protective clothing - Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers - Requirements and test methods | |
| PROTECTIVE CLOTHING. PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR HORSE RIDERS. REQUIREMENTS AND TEST METHODS. | |
| Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission | |
| Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications | |
| Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses | |
| Public transport - Road vehicle scheduling and control systems - Part 5: CANopen cabling specifications | |
| Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests | |
| Railway applications - Air conditioning for main line rolling stock - Part 2 : Type tests | |
| Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance | |
| Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint (Endorsed by AENOR in August of 2003.) | |
| RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT | |
| Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance | |
| Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads | |
| Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading (Endorsed by AENOR in August of 2003.) | |
| RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING | |
| Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance (Endorsed by AENOR in August of 2003.) | |
| Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance. (Consolidated versión) | |
| RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 5: DETERMINATION OF ELECTRICAL RESISTANCE | |
| Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions. | |
| Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions | |
| Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force and uplift stiffness | |
| Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force | |
| Railway applications - Track - Test methods for fastening systems - Part 8: In service testing | |
| Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness | |
| RAILWAY APPLICATIONS - TRACK - WOOD SLEEPERS AND BEARERS. | |
| Railway applications - Track - Wood sleepers and bearers | |
| Railway applications. Air conditionning for main line rolling stock. Part 1: Comfort parameters. | |
| Railway applications. Track. Test methods for fastening systems. Part 8: In service testing. | |
| Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Method for calculation | |
| Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation | |
| REFRIGERATING SYSTEMS AND HEAT PUMPS. PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING. METHODS FOR CALCULATION. | |
| Road lighting - Part 2: Performance requirements | |
| Road lighting - Part 3: Calculation of performance | |
| Road lighting - Part 4: Methods of measuring lighting performance | |
| Road lighting - Part 5: Energy performance indicators | |
| Road marking materials - Wear simulator Turntable | |
| Road marking materials - Wear simulators. | |
| ROAD RESTRAINT SYSTEMS - PART 1: TERMINOLOGY AND GENERAL CRITERIA FOR TEST METHODS. | |
| Road restraint systems - Part 1: Terminology and general criteria for test methods | |
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets | |
| ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS. | |
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety | |
| Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions | |
| Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems | |
| ROAD RESTRAINT SYSTEMS. PART 3: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR CRASS CUSHIONS. | |
| Round and sawn timber - Method of measurement of biological degrade | |
| Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber | |
| Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber | |
| ROUND AND SAWN TIMBER. DETERMINATION OF THE BATCH VOLUME OF SAWN TIMBER. | |
| ROUND AND SAWN TIMBER. PERMITTED DEVIATIONS AND PREFERRED SIZES. PART 1: SOFTWOOD SAWN TIMBER. | |
| ROUND AND SAWN TIMBER. PERMITTED DEVIATIONS AND PREFERRED SIZES. PART 2: HARDWOOD SAWN TIMBER. | |
| Safety of machine tools - Milling machines (including boring machines) | |
| Safety of machine tools. Milling machines (including boring machines). | |
| SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS A POLYCARBONATE FILM DIELECTRIC. (Endorsed by AENOR in June of 1998.) | |
| Sectional Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric (Endorsed by AENOR in November of 2002.) | |
| SECTIONAL SPECIFICATION: FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (Endorsed by AENOR in July of 1998.) | |
| Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product. | |
| Silage thermoplastic films. | |
| Solar supported gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 500 litres water storage capacity - Part 3: Assessment of energy consumption | |
| Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings | |
| SPECIFICATION AND TESTING FOR LPG CYLINDER VALVES. SELF CLOSING. | |
| Specification and testing of LPG cylinder valves - Manually operated | |
| Specification and testing of LPG cylinder valves - Self closing | |
| Specification and testing of LPG cylinder valves. Manually operated. | |
| Spectator facilities - Part 1: General characteristics for spectator viewing area | |
| Spectator facilities - Part 1: Layout criteria for spectator viewing area - Specification | |
| Spectator facilities - Part 3: Separating elements - Requirements | |
| Spectator facilities - Part 4: Seats - Product characteristics | |
| Spectator facilities - Part 5: Telescopic stands | |
| Spectator facilities - Part 6 : Demountable (temporary) stands | |
| Spectator facilities - Part 6: Demountable (temporary) stands | |
| Spectator facilities - Part 6: Demountable stands | |
| Spectator facilities - Part 7: Entry and exit elements and routes | |
| Spectator facilities - Part 8: Safety Management | |
| Tannery machines - Roller coating machines - Safety requirements. | |
| Tannery machines - Roller coating machines - Safety requirements | |
| Tannery machines - Rotating process vessels - Safety requirements | |
| Tannery machines - Splitting and bandknife shearing machines - Safety requirements. | |
| Tannery machines - Splitting and bandknife shearing machines - Safety requirements | |
| Tannery machines- Rotating process vessels - Safety requirements. | |
| TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST. | |
| Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test | |
| TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 2: BITUMEN NUMBER. | |
| Textile floor coverings - Determination of the apparent effective thickness of the backing (Endorsed by AENOR in August of 2006.) | |
| Textile floor coverings - Determination of the apparent effective thickness of the backing | |
| TEXTILE FLOOR COVERINGS. DETERMINATION OF THE APPARENT EFFECTIVE THICKNESS OF THE BACKING. | |
| Thermal insulating products - Evaluation of conformity. | |
| Thermal insulating products - Evaluation of conformity | |
| Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification. | |
| Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification | |
| Thermal insulating products. Evaluation of conformity | |
| Thermal insulation products - Common evaluation rules | |
| Thermal insulation products - Evaluation of conformity | |
| Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification. | |
| Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification | |
| Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification | |
| Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification | |
| Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification | |
| Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification | |
| Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification | |
| Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification. | |
| Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification | |
| Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification. | |
| Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification | |
| Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification. | |
| Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification | |
| Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification. | |
| Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification | |
| Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification | |
| Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification | |
| Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification. | |
| Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification | |
| Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification | |
| Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification. | |
| Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification | |
| Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS) . Specification. | |
| Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification. | |
| Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983 modified) | |
| TRANSPORT PACKAGING - REUSABLE, RIGID PLASTICS DISTRIBUTION BOXES - PART 1: GENERAL PURPOSE APPLICATION. | |
| TRANSPORT PACKAGING - REUSABLE, RIGID PLASTICS DISTRIBUTION BOXES - PART 2: GENERAL SPECIFICATIONS FOR TESTING. | |
| Transportable refillable welded aluminium cylinders for liquified petroleum gas (LPG). Design and construction. | |
| Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics | |
| Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts | |
| Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 10: Humidity controlled extract air terminal device | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls, assisted cowls and roof outlet terminal devices | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation... | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of ducted mechanical supply and exhaust ventilation units (including heat recovery) | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of non-ducted mechanical supply and exhaust ventilation units (including heat recovery) | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation... | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 9: Externally mounted humidity controlled air transfer device | |
| Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand | |
| VENTILATION FOR BUILDINGS. PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION . PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES | |
| Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended... | |
| Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking. | |
| VINEGAR. PRODUCT MADE FROM LIQUIDS OF AGRICULTURAL ORIGIN. DEFINITIONS, REQUIREMENTS, MARKING. | |
| Windows - Classification of mechanical properties - Racking, torsion and operating forces. | |
| Windows - Classification of mechanical properties - Racking, torsion and operating forces | |
| Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube. | |
| Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube. | |
| Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test | |
| Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test | |
| Workbenches for laboratories in educational institutions - Dimensions, safety and durability requirements and test methods | |
| Workbenches for laboratories. Dimensions, safety requirements and test methods. | |
| Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations. | |
| Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements | |
| Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency | |
| Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations | |
| Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces | |
| Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests |
| << Prev | Next >> |