AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Aerosol containers - Aerosol foam flammability test | |
| Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture | |
| Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch | |
| Aerosol containers - Compartmented aerosol containers | |
| Aerosol containers - Compartmented aerosol dispensers | |
| Aerosol containers - Determination of the ignition distance of the spray jet | |
| Aerosol containers - Enclosed space ignition test | |
| Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules | |
| Aerosol containers - Glass containers - Dimensions of the neck finish | |
| Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups | |
| Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height | |
| Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture | |
| Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans | |
| Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces | |
| Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems | |
| Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter | |
| Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter | |
| Application Interface for smart cards used as Secure Signature Creation Devices - Part 1: Basic services | |
| Application Interface for smart cards used as Secure Signature Creation Devices - Part 2: Additional Services | |
| BDS: AMBIENT-RATED RECTIFIER DIODES. (Endorsed by AENOR in September of 1996.) | |
| BDS: AMBIENT-RATED THYRISTORS. (Endorsed by AENOR in November of 1996.) | |
| BDS: BIPOLAR TRANSISTORS FOR SWITCHING APPLICATIONS. (Endorsed by AENOR in November of 1996.) | |
| BDS: CASE-RATED BIPOLAR TRANSISTORS FOR HIGH FREQUENCY AMPLIFICATION. (Endorsed by AENOR in November of 1996.) | |
| BDS: CASE-RATED BIPOLAR TRANSISTORS FOR LOW FREQUENCY AMPLIFICATION. (Endorsed by AENOR in November of 1996.) | |
| BDS: CASE-RATED RECTIFIER DIODES. (Endorsed by AENOR in September of 1996.) | |
| BDS: CASE-RATED THYRISTORS. (Endorsed by AENOR in November of 1996.) | |
| BDS: CURRENT REGULATOR AND CURRENT REFERENCE DIODES. (Endorsed by AENOR in November of 1996.) | |
| BDS: GENERAL PURPOSE SEMICONDUCTOR DIODES. (Endorsed by AENOR in November of 1996.) | |
| BDS: SINGLE GATE FIELD-EFFECT TRANSISTORS. (Endorsed by AENOR in November of 1996.) | |
| BDS: THYRISTOR DIODE TRANSIENT SUPPRESSOR (Endorsed by AENOR in May of 1996.) | |
| BDS: UNIDIRECTIONAL TRANSIENT OVERVOLTAGE SUPPRESSOR DIODES. (Endorsed by AENOR in September of 1996.) | |
| BDS: VARIABLE CAPACITANCE DIODES. (Endorsed by AENOR in November of 1996.) | |
| Bicycles - Accessories for bicycles - Luggage carriers | |
| Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method | |
| Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders | |
| Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods | |
| Building valves - Combined temperature and pressure relief valves - Tests and requirements. | |
| Building valves - Expansion groups - Tests and requirements. | |
| Building valves - Expansion groups - Tests and requirements | |
| Building valves - Expansion valves - Tests and requirements. | |
| Building valves - Expansion valves - Tests and requirements | |
| Building valves - Hydraulic safety groups - Tests and requirements. | |
| Building valves - Hydraulic safety groups - Tests and requirements | |
| Building valves - Pressure safety valves - Tests and requirements. | |
| Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control | |
| Characterization of waste - Preparation of test portions from the laboratory sample (Endorsed by AENOR in October of 2006.) | |
| Characterization of waste - Preparation of test portions from the laboratory sample | |
| Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan (Endorsed by AENOR in August of 2006.) | |
| Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan | |
| Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics | |
| Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2) | |
| Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. HYGIENIC HANDRUB. TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2). | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. HYGIENIC HANDWASH. TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2). | |
| Chemicals used for treatment of swimming pool water - Aluminium based coagulants | |
| Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid | |
| Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Phosphonic acids and salts | |
| Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts | |
| Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polyphosphates | |
| Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use (Endorsed by AENOR in October of 2006.) | |
| Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use | |
| Chemicals used for treatment of water intended for human consumption - Sodium chlorate (Endorsed by AENOR in October of 2006.) | |
| Chemicals used for treatment of water intended for human consumption - Sodium chlorate | |
| Children's high chairs - Part 1: Safety requirements | |
| Children's high chairs - Part 2: Test methods | |
| Children's high chairs - Requirements and test methods | |
| Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances | |
| Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed... | |
| Conveyor belts for use in underground installations - Electrical and flammability safety requirements | |
| Copper and copper alloys - Detection of tensile stress - 5 % ammonia test | |
| Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method | |
| Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method | |
| Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method | |
| Copper and copper alloys - Determination of antimony content - Part 2: FAAS method | |
| Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method | |
| Copper and copper alloys - Determination of beryllium content - FAAS method | |
| Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of chromium content - Part 2: FAAS method | |
| Copper and copper alloys - Determination of cobalt content - FAAS method | |
| Copper and copper alloys - Determination of impurities in pure copper - ET AAS method | |
| Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) | |
| Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometry method (FAAS) | |
| Cranes - Bridge and gantry cranes | |
| Cranes - Requirements for container handling spreaders | |
| Cranes - Slewing jib cranes | |
| Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods | |
| Design of fans working in potentially explosive atmospheres | |
| Domestic cookware - Graphical symbols (pictograms) | |
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods | |
| Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty) | |
| Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO) | |
| Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage | |
| Facilities for users of roller sports equipment - Safety requirements and test methods | |
| Fertilizers and liming materials - Determination of cadmium content | |
| Fibre cement profiled sheets - Impact resistance test method | |
| Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity | |
| Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity | |
| Fixed firefighting system - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2005, modified) | |
| Fixed firefighting system - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2015, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 11: Physical properties and systems design of gas extinguishing systems for Halocarbon Blend 55 extinguishant (ISO 14520-17:2022, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2015, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2023, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2019, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2024, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO 14520-6:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8:2019, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9:2019, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10:2019, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2015, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2005, modified) | |
| Fixed firefighting systems - Water mist systems - Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 11: Test protocol for cable tunnels for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 12: Test protocol for commercial deep fat cooking fryers for manually activated open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m³ for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 16: Test protocol for industrial oil cookers for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 17: Test protocol for residential occupancies for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 1: Design, installation, inspection and maintenance | |
| Fixed firefighting systems - Water mist systems - Part 3: Test protocol for office, school classrooms and hotel for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 4: Test protocol for non-storage occupancies for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 5: Test protocol for car garages for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 6: Test protocol for false floors and false ceilings for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 7: Test protocol for commercial low hazard occupancies for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 8: Test protocol for machinery in enclosures exceeding 260 m³ for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 9: Test protocol for machinery in enclosures not exceeding 260 m³ for open nozzle systems | |
| Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics | |
| Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics (Endorsed by AENOR in October of 2006.) | |
| Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics | |
| Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (Endorsed by AENOR in March of 2010.) | |
| Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements | |
| Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements | |
| Forest machinery - Self propelled machinery - Safety requirements | |
| Funeral Services - Requirements | |
| Funeral Services. Requirements | |
| Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 1: Specification for the storage facility and related storage provision | |
| Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 2: Provision of the service | |
| Garden equipment - Walk-behind combustion engine powered trimmers - Safety | |
| Gas explosion venting protective systems | |
| Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1:... | |
| Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2:... | |
| Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part... | |
| Glass packaging - Cork removal devices - General requirements | |
| Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers | |
| Heating boilers - Condensing heating boilers for fuel oil | |
| Heating boilers - Special requirements for oil fired room sealed units up to 70 kW | |
| Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators | |
| Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator | |
| Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation (Endorsed by AENOR in June of 2010.) | |
| Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation | |
| Inflatable play equipment - Part 1: Safety requirements and test methods | |
| Inflatable play equipment - Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation | |
| Inflatable play equipment - Part 3: Additional safety requirements and test methods for snappies | |
| Inflatable play equipment - Part 4: Additional safety requirements and test methods for bungee runs | |
| Inflatable play equipment - Safety requirements and test methods | |
| Influence of cement based products on water intended for human consumption - Test methods - Part 2: Influence of site-applied cement based materials and associated non-cement based products/materials on organoleptic... | |
| Influence of cement based products on water intended for human consumption - Test methods - Part 4: Migration of substances from site-applied cement based materials and associated non-cement based products/materials... | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters (Endorsed by AENOR in October... | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products | |
| Inland navigation vessels - Boarding ladders | |
| Inland navigation vessels - Boarding stairs (Endorsed by Asociación Española de Normalización in March of 2023.) | |
| Inland navigation vessels - Boarding stairs | |
| Inland navigation vessels - Flat bollards (Endorsed by AENOR in August of 2006.) | |
| Inland navigation vessels - Flat bollards | |
| Inland navigation vessels - Studless anchor chain - Cable lifter (Endorsed by AENOR in August of 2006.) | |
| Inland navigation vessels - Studless anchor chain - Cable lifter | |
| Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods | |
| Leather - Leather for automotive - Test methods and testing parameters | |
| Lifting platforms - Mast climbing work platforms | |
| Lifting platforms. Mast climbing work platforms. | |
| Liming materials - Determination of product effect on soil pH - Soil incubation method | |
| Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking | |
| Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation | |
| Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation | |
| Loft ladders - Requirements, marking and testing | |
| LPG equipment and accessories - Cylinder and drum marking | |
| LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders | |
| LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; procedure for checking before, during and after filling (Endorsed by... | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; procedure for checking before, during and after filling | |
| Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture | |
| Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans | |
| Metal bellows expansion joints for pressure applications | |
| Mobile or movable Jacks and associated lifting equipment | |
| Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method | |
| Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method | |
| Non-preloaded structural bolting assemblies - Part 1: General requirements | |
| Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose | |
| Non-preloaded structural bolting assemblies - Part 2: Suitability test | |
| Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols (Endorsed by Asociación Española de Normalización in March of 2020.)... | |
| Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack (Endorsed by AENOR in December of 2005.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 10: Web Services for Control Networking Protocol Specification (Endorsed by Asociación Española de Normalización... | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack (Endorsed by AENOR in June of 2014.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication (Endorsed by AENOR in June of 2014.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification (Endorsed by AENOR in January of 2007.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification (Endorsed by AENOR in June of 2014.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication (Endorsed by AENOR in January of 2007.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication (Endorsed by AENOR in June of 2014.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements (Endorsed by AENOR in November of 2010.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 8: Communication using Broadband over Power Line Networks - with internet protocols (Endorsed by... | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands (Endorsed by Asociación Española de Normalización in December... | |
| Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate (Endorsed by AENOR... | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers | |
| Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 | |
| Packaging - Plastic freezer bags - Specifications and test methods | |
| Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use | |
| Personal fall protection equipment - Rescue harnesses (Endorsed by AENOR in September of 2008.) | |
| Personal fall protection equipment - Rescue harnesses | |
| Personal fall protection equipment - Rescue lifting devices | |
| Personal fall protection equipment - Rescue loops | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified) (Endorsed by AENOR in February of 2005.)... | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) (Endorsed by AENOR in August of 2011.)... | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2018, modified) (Endorsed by Asociación Española de Normalización in... | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) (Endorsed by AENOR in March of 2005.) | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) (Endorsed by AENOR in April of 2006.) | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 4: Factory cold bends (ISO 15590-4:2019, modified) (Endorsed by Asociación Española de Normalización... | |
| Plastics - Evaluation of compostability - Test scheme and specifications | |
| Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications | |
| Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods | |
| Plastics - Thermoplastic stretch films for wrapping silage bales | |
| Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements | |
| Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness | |
| Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints | |
| Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints | |
| Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints | |
| Precast concrete products - Beam-and-block floor systems - Part 1: Beams | |
| Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks | |
| Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks | |
| Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks | |
| Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork | |
| Precast concrete products - Bridge elements | |
| Precast concrete products - Foundation elements | |
| Precast concrete products - Wall elements | |
| Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing | |
| Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and... | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy... | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and... | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products... | |
| PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY. PART 1: DEFINITIONS. | |
| Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide (Endorsed by AENOR in October of 2006.) | |
| Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide | |
| Protection of metallic materials against corrosion - Guidance on the assesment of corrosion likelihood in water circulation systems | |
| Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting | |
| PROTECTIVE CLOTHING FOR FIREFIGHTERS. TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALIZED FIRE FIGHTING. | |
| Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate | |
| Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h | |
| Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods | |
| Railway applications - Suspension components - Torsion bar, steel | |
| Railway applications - Technical documents - Part 1: General Principles | |
| Railway applications - Technical documents - Part 2: Parts lists | |
| Railway applications - Technical documents - Part 3: Handling of modifications of technical documents | |
| Railway applications - Technical documents - Part 4: Data exchange | |
| Railway applications - Track - Qualification system for railway trackwork contractors | |
| Refractory products and materials - Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use | |
| Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | |
| Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | |
| Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | |
| Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles | |
| Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | |
| Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | |
| REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES. GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS. PART 1: REAR-END LOADED REFUSE COLLECTION VEHICLES. | |
| RESCUE EQUIPMENT. RESCUE HARNESSES. | |
| RESCUE EQUIPMENT. RESCUE LIFTING DEVICES. | |
| RESCUE EQUIPMENT. RESCUE LOOPS. | |
| Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking. | |
| Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking | |
| RESPIRATORY PROTECTIVE DEVICES. FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES. REQUIREMENTS, TESTING, MARKING. | |
| Rigid underlays for discontinuous roofing - Definitions and characteristics | |
| Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods. | |
| Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats. | |
| Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction | |
| Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters | |
| Safety of machinery - Safety requirements for strip processing line machinery and equipment (Endorsed by AENOR in January of 2009.) | |
| Safety of machinery - Safety requirements for strip processing line machinery and equipment (Endorsed by Asociación Española de Normalización in April of 2022.) | |
| Safety of machinery - Safety requirements for strip processing line machinery and equipment | |
| Semantics for groundwater data interchange | |
| Skateparks - Safety requirements and test methods | |
| Snow grooming equipment - Safety requirements | |
| Solid biofuels - Determination of calorific value | |
| Solid biofuels - Fuel specifications and classes - Part 1: General requirements | |
| Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use | |
| Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use | |
| Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use | |
| Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use | |
| Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use | |
| Solid hardwood panelling and cladding - Machined profiles elements | |
| Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking | |
| Solid wood panelling and cladding - Characteristics, requirements and marking | |
| Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry | |
| Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry | |
| Stationary source emissions - Determination of total mercury - Automated measuring systems | |
| Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) | |
| Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) | |
| Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method | |
| Surface active agents - Determination of N-(3-dimethylaminopr opyl)-alkylamide content in alkylamidopropylbeta ines - Gas chromatographic method | |
| Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC | |
| Surfaces for sport areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas | |
| Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas | |
| Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas | |
| Surfaces for sports areas - Determination of water absorption of unbound minerals | |
| Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas | |
| Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification (Endorsed by AENOR in October of 2006.) | |
| Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification | |
| Surfaces for sports areas - Multi-sports floor systems for indoor use - Test method for determination of rotational friction | |
| Synthetic surfaces for outdoor sports areas - Specification | |
| Technical drawings - Railway applications - Part 1: General principles | |
| Technical drawings - Railway applications - Part 2: Parts lists | |
| Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents | |
| Technical drawings - Railway applications - Part 4: Data exchange (Endorsed by AENOR in September of 2006.) | |
| Technical drawings - Railway applications - Part 4: Data exchange | |
| Textile floor coverings - Determination of the density of the textile fleece backing | |
| Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use | |
| Textile slings - Safety - Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use. | |
| Textile slings - Safety - Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use | |
| Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use | |
| Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for general purpose use. | |
| Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for general purpose use | |
| Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes | |
| Textiles - Burning behaviour of children's nightwear - Specification | |
| Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area (Endorsed by AENOR in August of 2006.) | |
| Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area | |
| Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics (Endorsed by AENOR in August of 2006.) | |
| Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics | |
| Textiles - Mattress ticking - Specifications and test methods | |
| Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification | |
| Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface... | |
| Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method (Endorsed by AENOR in October of... | |
| Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method | |
| Touch and close fasteners. Determination of resistance to frying after washing | |
| Translation services - Service requirements | |
| Transport service - City logistics - Guideline for the definition of limited access to city centers | |
| Transport services - Logistics - Glossary of terms (Endorsed by AENOR in August of 2006.) | |
| Transport services - Logistics - Glossary of terms | |
| Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums | |
| Transportable wall saw and wire saw equipment for job site - Safety | |
| Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards. | |
| Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards | |
| Valves. Materials for bodies, bonnets and covers. Part 1: Steels specified in European Standards. | |
| Valves. Materials for bodies, bonnets and covers. Part 2: Steels other than those specified in European Standards. | |
| Valves. Materials for bodies, bonnets and covers. Part 3: Cast irons specified in European Standards. | |
| VEHICLE LIFTS. | |
| Vehicle lifts | |
| VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS SECTION - DIMENSIONS | |
| Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers | |
| Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification | |
| Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (Endorsed by AENOR in August of 2006.) | |
| Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications | |
| Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing | |
| Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing | |
| Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment | |
| Water quality - Guidance on the scope and selection of fish sampling methods (Endorsed by AENOR in October of 2006.) | |
| Water quality - Guidance on the scope and selection of fish sampling methods | |
| WATER QUALITY. DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX). | |
| Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods | |
| Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods | |
| Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method | |
| Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method |
| << Prev | Next >> |