AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
70
80
90
100
110
120
124
125
126
127
128
129
130
131
132
133
134
135
136
140
150
160
170
180
| Product Name | Notes |
|---|---|
| Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.) | |
| Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.) | |
| Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| AGRICULTURAL AND FORESTRY MACHINERY. PORTABLE CHAIN SAWS. SAFETY. | |
| Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements | |
| Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines | |
| Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services (Endorsed by Asociación Española de Normalización in April of 2017.)... | |
| Alarm and electronic security systems - Part 11-32: Electronic access control systems - Access control monitoring based on Web services (Endorsed by Asociación Española de Normalización in April of 2017.)... | |
| Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) (IEC 60812:2006). (Endorsed by AENOR in May of 2007.) | |
| Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) | |
| Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-2: Methods for general application - Thermal ageing methods. | |
| CONDUCTIVE CLOTHING FOR LIVE WORKING AT A NOMINAL VOLTAGE UP TO 800 KV A.C. | |
| Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) | |
| Connectors for optical fibres and cables -- Part 1-1: Blank detail specification (IEC 60874-1-1:2006). (Endorsed by AENOR in May of 2007.) | |
| CONNECTORS FOR OPTICAL FIBRES AND CABLES -- PART 1: GENERIC SPECIFICATION (Endorsed by AENOR in November of 1999.) | |
| Connectors for optical fibres and cables -- Part 1: Generic specification (IEC 60874-1:2006). (Endorsed by AENOR in May of 2007.) | |
| CONNECTORS FOR OPTICAL FIBRES AND CABLES. PART 19: SECTIONAL SPECIFICATION FOR FIBRE OPTIC CONNECTOR. TYPE SC-D(UPLEX) (Endorsed by AENOR in October of 1998.) | |
| Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling... | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing... | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at... | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density | |
| Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene | |
| Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations -- Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories - Cord sets and interconnection cord sets | |
| Electrical and pneumatic analogue chart recorders for use in industrial process control systems -- Part 2: Guidance for inspection and routine testing | |
| Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation | |
| Electrical test methods for electric cables - Part 2: Partial discharge tests | |
| Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | |
| ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL-PROCESS MEASUREMENT AND Control equipment. Part 2: Electrostatic discharge requirements. | |
| Equipment for monitoring of radionuclides in liquid effluents and surface waters (Endorsed by AENOR in July of 2008.) | |
| Fibre optic attenuators. Part 1: Generic specification. (Endorsed by AENOR in March of 2001.) | |
| Fibre optic branching devices - Part 1-1: Blank detail specification | |
| FIBRE OPTIC BRANCHING DEVICES. PART 1: GENERIC SPECIFICATION. (Endorsed by AENOR in July of 1998.) | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification (Endorsed by AENOR in April of 2012.) | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification (Endorsed by AENOR in May of 2012.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification (Endorsed by AENOR in August of 2013.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification (Endorsed by AENOR in November of 2012.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification (Endorsed by AENOR in November of 2014.) | |
| Fibre optic interconnecting devices and passive components - Non-wavelength-selec tive fibre optic branching devices - Part 1: Generic specification (Endorsed by AENOR in August of 2015.) | |
| Fibre optic interconnecting devices and passive components - Non-wavelength-selec tive fibre optic branching devices - Part 1: Generic specification | |
| Fibre optic spatial switches -- Part 1: Generic specification (Endorsed by AENOR in March of 2002.) | |
| FLICKERMETER. FUNCTIONAL AND DESIGN SPECIFICATIONS. | |
| FLICKERMETER. PART 0: EVALUATION OF FLICKER SEVERITY. | |
| GRAFCET specification language for sequential function charts (Endorsed by AENOR in July of 2013.) | |
| GRAFCET specification language for sequential function charts. (Endorsed by AENOR in August of 2002.) | |
| GRAFCET specification language for sequential function charts | |
| HARD-DRAWN ALUMINIUM WIRE FOR OVERHEAD LINE CONDUCTORS. | |
| Helical-scan video tape cassette system using 8 mm magnetic tape (8 mm video) -- Part 4: Video subcode (VSC) (Endorsed by AENOR in August of 2000.) | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 8 MM MAGNETIC TAPE 8 MM VIDEO. PART 2: PCM MILTI-TRACK AUDIO SYSTEM. (Endorsed by AENOR in December of 1995.) | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 8 MM MAGNETIC TAPE-8MM VIDE. PART 3: HIGH-BAND SPECIFICATIONS FOR HI 8. (Endorsed by AENOR in December of 1995.) | |
| HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM USING 8 MM MAGNETIC TAPE-8MM VIDEO. PART 1: GENERAL SPECIFICATIONS. (Endorsed by AENOR in December of 1995.) | |
| IEC 821 VMEBUS. MICROPROCESSOR SYSTEM BUS FOR 1 BYTE TO 4 BYTE DATA. (Endorsed by AENOR in November of 1997.) | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application - Tests at low temperature | |
| Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking -... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break... | |
| Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Low... | |
| Insulating and sheathing materials of electric and optical cables. Common test methods. Part 2-1: Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests. | |
| INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES. COMMON TEST METHODS. PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS. LOSS OF MASS TEST. THERMAL STABILITY TEST. | |
| INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES. COMMON TEST METHODS. PART 5-1: METHODS SPECIFIC TO FILLING COMPOUNDS. DROPT POINT. SEPARATION OF OIL. LOW TEMPERATURE BRITTLENESS. TOTAL ACID NUMBER. | |
| Insulating and sheathing materials of electric and optical fibre cables - Common test methods -- Part 4: Methods specific to polyethylene and polypropylene compounds -- Section 2: Tensile strength and... | |
| Insulating and sheathing materials of electric cables - Common test methods -- Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to... | |
| INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. COMMON ETST METHODS. PART 1: GENERAL APPLICATION. SECTION 2: THERMAL AGEING METHODS. | |
| INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. COMMON TEST METHODS. PART 1: GENERAL APPLICATION. SECTION 3: METHODS FOR DETERMINING THE DENSITY. WATER ABSORPTION TESTS SHRINKAGE TEST. | |
| INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. COMMON TEST METHODS. PART 4: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS. SECTION 1: RESISTANCE TO ENVIRONMENTAL STRESS CRACKING. WRAPPING TEST AFTER THERMAL... | |
| INSULATING AND SHEATHING OF ELECTRIC AND OPTICAL CABLES. COMMON TEST METHODS. PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS. OZONE RESISTANCE, HOT SET AND MINERAL OIL IMMERSION TESTS. | |
| INSULATING AND SHEATHING OF ELECTRIC CABLES. COMMON TEST METHODS. GENERAL APPLICATION. SECTION 4: TEST AT LOW TEMPERATURE. | |
| INSULATING AND SHEATHING OF ELECTRIC CABLES. COMMON TEST METHODS. PART 2: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS. SECTION 1: OZONE RESISTANCE TEST. HOT SET TEST. MINERAL OIL IMMERSION TEST. | |
| INSULATING AND SHEATHING OF ELECTRIC CABLES. COMMON TEST METHODS. PART 3: METHODS SPECIFIC TO PVC COMPOUNDS. SECTION 1: PRESURE TEST AT HIGH TEMPERATURE. TESTS FOR RESISTANCE TO CRACKING. | |
| INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES. COMMON TEST METHODS. PART 1: GENERAL APPLICATION. SECTION 1: MEASUREMENT OF THICKNESS AND OVERALT DIMENSIONS. TESTS FOR DETERMINING THE MECHANICAL PROPERTIES. | |
| INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES. COMMON TEST METHODS. PART 3: METHODS SPECIFIC TO PVC COMPOUNDS. SECTION 1: PRESURE TEST AT HIGH TEMPERATURE. TESTS FOR RESISTANCE TO CRACKINGS. | |
| INSULATING FOAM-FILLED TUBES AND SOLID RODS FOR LIVE WORKING. | |
| INSULATING LIQUIDS. OIL-IMPREGNATED PAPER AND PRESSBOARD. DETERMINATION OF WATER BY AUTOMATIC COULOMETRIC KARL FISCHER TITRATION. | |
| INSULATING LIQUIDS. SPECIFICACIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS. | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (Endorsed by... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 1: Definitions, designations and general requirements | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide... | |
| INSULATING POLES (INSULATING STICKS) AND UNIVERSAL TOOL ATTACHMENTS (FITTINGS) FOR LIVE WORKING. | |
| INTEGRATING-AVERAGIN G SOUND LEVEL METERS. | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements (Endorsed by AENOR in April of 2015.) | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements (Endorsed by Asociación Española de Normalización in June of 2019.) | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements (Endorsed by Asociación Española de Normalización in September of 2017.) | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements | |
| Lamps for road vehicles - Performance requirements (Endorsed by AENOR in April of 2015.) | |
| Lamps for road vehicles - Performance requirements (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Lamps for road vehicles - Performance requirements. | |
| Lamps for road vehicles - Performance requirements | |
| LAMPS FOR ROAD VEHICLES. PERFORMANCE REQUIREMENTS. | |
| Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. | |
| Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section | |
| Live working - Insulating sticks and attachable devices -- Part 1: Insulating sticks | |
| Live working - Insulating sticks and attachable devices -- Part 2: Attachable devices | |
| MARINE AUTOMATIC RADAR PLOTTING AIDS (ARPA). OPERATIONAL REQUIREMENTS. METHODS OF TESTING AND TEST RESULTS (Endorsed by AENOR in May of 1995.) | |
| MARINE AUTOMATIC RADAR PLOTTING AIDS (ARPA). OPERATIONAL REQUIREMENTS. METHODS OF TESTING AND TEST RESULTS. (Endorsed by AENOR in May of 1995.) | |
| MARINE AUTOMATIC RADAR PLOTTING AIDS (ARPA). OPERATIONAL REQUIREMENTS. METHODS OF TESTING AND TEST RESULTS. | |
| Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results. | |
| Maritime navigation and radiocommunication equipment and systems - Radar plotting aids -- Part 3: Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results. | |
| MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS. RADAR PLOTTING AIDS. PART 1: AUTOMATIC RADAR PLOTTING AIDS (ARPA). METHODS OF TESTING AND REQUIRED TEST RESULTS | |
| METHODS OF EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS. | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on radio-relay systems - Section 2: Antenna | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 10: Overall system performance | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarization interference canceller | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 1: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulato r | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 5: Digital signal processing sub-system | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 9: Terminal equipment SCPC-PSK | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth stations... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 12: Overall system performance | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 13: VSAT systems | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG)... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 1: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 4: Low noise amplifier | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 5: Up- and down-converters | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High power amplifiers | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system | |
| METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 2: MEASUREMENTS ON TERRESTRIAL RADIO-RELAY SYSTEMS. SECTION 8: ADAPTIVE EQUALIZER. (Endorsed by AENOR in December of 1996.)... | |
| METHODS OF TEST FOR WINDING WIRES. PART 4: CHEMICAL PROPERTIES. | |
| Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in July of 2021.) | |
| Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in September of 2017.) | |
| Miscellaneous lampholders - Part 1: General requirements and tests | |
| Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules | |
| Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (Endorsed by Asociación Española de Normalización in July of 2023.) | |
| Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Miscellaneous lampholders -- Part 1: General requirements and tests. | |
| Miscellaneous lampholders -- Part 1: General requirements and tests | |
| Miscellaneous lampholders -- Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006). | |
| Miscellaneous lampholders -- Part 2: Particular requirements -- Section 1: Lampholders S14 | |
| MISCELLANEOUS LAMPHOLDERS. PART 1: GENERAL REQUIREMENTS AND TESTS. | |
| MISCELLANEOUS LAMPHOLDERS. PART 2: PARTICULAR REQUIREMENTS. SECTION 1: LAMPHOLDERS S14. | |
| MISCELLANEOUS LAMPHOLDERS. PART 2: PARTICULAR REQUIREMENTS. SECTION 1: LAMPHOLDERS S14 | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers (Endorsed by AENOR in February of 2012.) | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles (Endorsed by AENOR... | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles | |
| Non-cellulosic papers for electrical purposes -- Part 2: Methods of test. | |
| Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Filled glass paper. | |
| Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Hybrid inorganic-organic paper. | |
| Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2006) (Endorsed by AENOR in November of 2006.) | |
| Non-cellulosic papers for electrical purposes Part 1: Definitions and general requirements (Endorsed by AENOR in April of 2012.) | |
| NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES. PART 1: DEFINITIONS AND GENERAL REQUIREMENTS. | |
| Non-wavelength-selec tive fibre optic branching devices -- Part 1: Generic specification. (Endorsed by AENOR in August of 2001.) | |
| Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions (Endorsed by AENOR in February of 2010.) | |
| Optical fibre cables - Part 1-1: Generic specification - General | |
| Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions | |
| Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods | |
| Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods (Endorsed by AENOR in October of 2012.) | |
| Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods | |
| Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods | |
| Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods | |
| Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance | |
| Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures. | |
| Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures | |
| Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical cable test procedures | |
| Optical fibre cables - Part 1-3: Generic specification - optical cable elements | |
| Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (Endorsed by AENOR in January of 2012.) | |
| Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling (Endorsed by AENOR in October of 2012.)... | |
| Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables (Endorsed by AENOR in July of 2014.) | |
| Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical distribution cables | |
| Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling (Endorsed by AENOR in March of 2013.)... | |
| Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors (Endorsed by Asociación Española de Normalización in May of... | |
| Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables | |
| Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres | |
| Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment (Endorsed by AENOR in October of 2014.)... | |
| Optical fibre cables - Part 2: Indoor cables - Sectional specification (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Optical fibre cables - Part 2: Indoor cables - Sectional specification | |
| Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables | |
| Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables (Endorsed by AENOR in April of 2015.) | |
| Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling (Endorsed by AENOR in August of... | |
| Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling (Endorsed by AENOR in July of... | |
| Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables | |
| Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling | |
| Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling (Endorsed by AENOR in March of 2016.) | |
| Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes | |
| Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/flo ating in drinking water pipes | |
| Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment (Endorsed by AENOR in June of 2016.) | |
| Optical fibre cables - Part 3: Sectional specification - Outdoor cables (Endorsed by AENOR in February of 2015.) | |
| Optical fibre cables - Part 3: Sectional specification - Outdoor cables | |
| Optical fibre cables - Part 4-10: Aerial optical cables along electrical power lines - Family specification for OPGW (Optical Ground Wires) | |
| Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines (Endorsed by AENOR in February of 2015.) | |
| Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines | |
| Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) optical cables (Endorsed by AENOR in February of... | |
| Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines | |
| Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing (Endorsed by AENOR in July of 2014.) | |
| Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing (Endorsed by AENOR in July of 2014.) | |
| Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing | |
| Optical fibre cables -- Part 1-1: Generic specification - General. (Endorsed by AENOR in July of 2002.) | |
| Optical fibre cables -- Part 1-1: Generic specification - General. | |
| Optical fibre cables -- Part 1-1: Generic specification - General | |
| Optical fibre cables -- Part 1-2: Generic specification - Basic optical cable test procedures (Endorsed by AENOR in February of 2003.) | |
| Optical fibre cables -- Part 2-10: Indoor cables - Family specification for simplex and duplex cables. (Endorsed by AENOR in May of 2003.) | |
| Optical fibre cables -- Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling (Endorsed by AENOR in February of 2006.) | |
| Optical fibre cables -- Part 2-20: Indoor cables - Family specification for multi-fibre optical distribution cables. (Endorsed by AENOR in May of 2003.) | |
| Optical fibre cables -- Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling (Endorsed by AENOR in March of 2006.) | |
| Optical fibre cables -- Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables. (Endorsed by AENOR in May of 2003.) | |
| Optical fibre cables -- Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (Endorsed by AENOR in March of 2006.) | |
| Optical fibre cables -- Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables (Endorsed by AENOR in September of 2008.) | |
| Optical fibre cables -- Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables | |
| Optical fibre cables -- Part 2-41: Indoor optical fibre cables - Product specification for simplex and duplex buffered A4 fibres | |
| Optical fibre cables -- Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres (Endorsed by AENOR in October of 2008.) | |
| Optical fibre cables -- Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres | |
| Optical fibre cables -- Part 3-10: Outdoor cables - Family specification for duct and directly buried optical telecommunication cables (Endorsed by AENOR in November of 2002.) | |
| Optical fibre cables -- Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables (Endorsed by AENOR in October of 2010.)... | |
| Optical fibre cables -- Part 3-20: Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables (Endorsed by AENOR in November of 2002.) | |
| Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings (Endorsed by AENOR in March of 2003.) | |
| Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and costal applications (Endorsed by AENOR in February of 2009.) | |
| Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and costal applications | |
| Optical fibre cables -- Part 3-40: Outdoor optical fibre cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary... | |
| Optical fibre cables Part 1-1: Generic specification - General (Endorsed by AENOR in July of 2002.) | |
| OPTICAL FIBRE CABLES. PART 3: DUCT, BURIED AND AERIAL CABLES. SECTIONAL SPECIFICATION. | |
| OPTICAL FIBRE CABLES. PART 3: TELECOMMUNICATION CABLES. SECTIONAL SPECIFICATION. | |
| Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (Endorsed by AENOR in April of 2016.) | |
| Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres | |
| Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (Endorsed by AENOR in April of 2016.) | |
| Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (Endorsed by AENOR in February of 2009.) | |
| Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (Endorsed by AENOR in October of 2013.) | |
| Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintai ning fibres (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Optical fibres -- Part 2-50 : Product specifications - Sectional specification for class B single-mode fibres (Endorsed by AENOR in September of 2004.) | |
| Optical fibres -- Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (Endorsed by AENOR in August of 2002.) | |
| Optical fibres -- Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres (Endorsed by AENOR in September of 2008.) | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations | |
| Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| PRE-RECORDED OPTICAL REFLECTIVE VIDEODISK SYSTEM "LASER VISION" 50 HZ/625 LINES - PAL | |
| PRE-RECORDED OPTICAL REFLECTIVE VIDEODISK SYSTEM. "LASER VISION" 50 HZ/625 LINES-PAL. | |
| PROCEDURES FOR TEMPERATURE AND IRRADIANCE CORRECTIONS TO MEASURED I-V CHARACTERISTICS OF CRYSTALLINE SILICON PHOTOVOLTAIC DEVICES. | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation (Endorsed by AENOR in March of 2005.) | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors (Endorsed... | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 2: High range beta and photon dose and dose... | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation | |
| RADIATION SAFETY OF LASER PRODUCTS, EQUIPMENT CLASSIFICATION REQUIREMENTS AND USER'S GUIDE. | |
| Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of laser products - Part 1: Equipment classification and requirements | |
| Safety of laser products - Part 4: Laser guards | |
| Safety of laser products -- Part 1: Equipment classification, requirements and user´s guide | |
| Safety of laser products -- Part 1: Equipment classification, requirements and user's guide. | |
| Safety of laser products -- Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004/A1:2006 ). | |
| Safety of laser products -- Part 2: Safety of optical fibre communication systems (OFCS) | |
| Safety of laser products -- Part 2: Safety of optical fibre communication systems. | |
| Safety of laser products -- Part 4: Laser guards (IEC 60825-4:2006). | |
| Safety of laser products -- Part 4: Laser guards | |
| SAFETY OF LASER PRODUCTS. PART 1: EQUIPMENT CLASSIFICATION, REQUIREMENTS AND USER'S GUIDE. | |
| SAFETY OF LASER PRODUCTS. PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS. | |
| SAFETY OF LASER PRODUCTS. PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS | |
| Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods | |
| Short-circuit currents - Calculation of effects -- Part 1: Definitions and calculation methods. | |
| SHORT-CIRCUIT CURRENTS. CALCULATION OF EFFECTS. PART 1: DEFINITIONS AND CALCULATION METHODS. | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General (Endorsed by AENOR in October of 2014.) | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - Part 4: Internal fuses | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 kV. Part 1: General. Performance, testing and rating. Safety requirements. Guide for installation and operation. | |
| Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses (Endorsed by AENOR in August of 2014.) | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating -... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test, self-healing test and destruction test... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating -... | |
| SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V. PART 2: AGEING TEST, SELF-HEALING TEST AND DESTRUCTION TEST. | |
| SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTMES HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV. PART 1: GENERAL. PERFORMANCE, TESTING AND RATING. SAFETY REQUIREMENTS. GUIDE... | |
| SOUND SYSTEMS FOR EMERGENCY PURPOSES (Endorsed by AENOR in July of 1998.) | |
| Sound systems for emergency purposes. | |
| Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on... | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS. | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 2: METHODS OF TEST. | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: TYPES OF INDUSTRIAL RIGID LAMINATED SHEETS. | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 4: REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON PHENOLIC RESINS. | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 6: REQUIREMENTS FOR RIGID LAMINATED SHEET BASED ON SILICONE RESINS. | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 7: REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON POLYIMIDE RESINS. | |
| SPECIFICATION FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEETS 3: REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON MELAMINE RESINS. | |
| SPECIFICATIONS FOR INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEETS 2: REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXIDE RESINS. | |
| SPECIFICATIONS FOR INDUSTRIAL RIGID LAMINATES SHEETS BASES ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 5: REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON POLYESTER RESINS. | |
| Specifications for unused silicone insulating liquids for electrotechnical purposes | |
| Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections | |
| Stationary lead-acid batteries -- Part 11: Vented types - General requirements and methods of tests | |
| Stationary lead-acid batteries -- Part 21: Valve regulated types - Methods of test | |
| Stationary lead-acid batteries -- Part 22: Valve regulated types - Requirements | |
| STATIONARY LEAD-ACID BATTERIES. GENERAL REQUIREMENTS AND METHODS OF TEST. PART 1: VENTED TYPES. | |
| STATIONARY LEAD-ACID BATTERIES. GENERAL REQUIREMENTS AND METHODS OF TEST. PART 2: VALVE REGULATED TYPES. | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (Endorsed by AENOR in January of 2016.) | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in May of 2026.) | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use (Endorsed by AENOR in September of 2012.) | |
| Surface acoustic wave (SAW) filters of assessed quality -- Part 2: Guidance on use | |
| Surface acoustic wave (SAW) filters of assessed quality -- Part 3: Standard outlines | |
| TELCONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 103: COMPANION STANDARD FOR THE INFORMATIVE INTERFACE OF PROTECTION EQUIPMENT. (Endorsed by AENOR in June of 1998.) | |
| TELECONTROL EQUIPMENT AND SYSTEM. PART 6-701: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO STANDARDS AND ITU-T RECOMMENDATIONS. FUNCIONAL PROFILE FOR PROVIDING THE TASE.1 APPLICATION SERVICE IN END SYSTEMS (Endorsed by AENOR in... | |
| Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks (Endorsed by AENOR in April of 2016.) | |
| Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles (Endorsed by Asociación Española de Normalización in October of 2023.) | |
| Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards | |
| Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol (Endorsed by AENOR in November of 2014.) | |
| Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol | |
| Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems (Endorsed by... | |
| Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems | |
| Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models (Endorsed by AENOR in November of 2014.) | |
| Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models | |
| Telecontrol equipment and systems -- Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks (Endorsed by AENOR in April of 2002.) | |
| Telecontrol equipment and systems -- Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks (Endorsed by AENOR in June of 2003.) | |
| Telecontrol equipment and systems -- Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles (Endorsed by AENOR in July of 2001.) | |
| Telecontrol equipment and systems -- Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles. (IEC 60870-5-104:2006). (Endorsed by AENOR in March of 2007.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 2: OPERATING CONDITIONS. SECTIon 1: Power supply and electromagnetic compabitibility. | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 2: OPERATING CONDITIONS. SECTION 2: ENVIRONMENTAL CONDITIONS (CLIMATIC, MECHANICAL AND OTHER NON-ELECTRICAL INFLUENCES). | |
| Telecontrol equipment and systems. Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks (Endorsed by AENOR in December of 2000.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 101: COMPANION STANDARD FOR BASIC TELECONTROL TASKS. (Endorsed by AENOR in April of 1996.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 102: COMPANION STANDARD FOR THE TRANSMISSION OF INTEGRATED TOTALS IN ELECTRIC POWER SYSTEMS. (Endorsed by AENOR in December of 1997.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 1: TRANSMISSION FRAME FORMATS. (Endorsed by AENOR in November of 1995.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 2: LINK TRANSMISSION PROCEDURES. (Endorsed by AENOR in November of 1995.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 3: GENERAL STRUCTURE OF APPLICATION DATA. (Endorsed by AENOR in November of 1995.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 4: DEFINITION AND CODING OF APPLICATION INFORMATION ELEMENTS. (Endorsed by AENOR in November of 1995.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 5: TRANSMISSION PROTOCOLS. SECTION 5: BASIC APPLICATION FUNCTIONS. (Endorsed by AENOR in April of 1996.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 6: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO AND ITU-T RECOMMENDATIONS. SECTION 501: TASE.1:SERVICE DEFINITIONS (Endorsed by AENOR in December of 1997.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 6: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO AND ITU-T RECOMMENDATIONS. SECTION 502: TASE.1:PROTOCOL DEFINITIONS. (Endorsed by AENOR in December of 1997.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 6: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO STANDARDS AND ITU-T RECOMMENDATIONS- SECTION 2: USE OF BASIC STANDARDS (OSI LAYERS 1-4) (Endorsed by AENOR in April of... | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 6: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO STANDARDS AND ITU-T RECOMMENDATIONS. SECTION 503: TASE.2 SERVICES AND PROTOCOL. (Endorsed by AENOR in June of 1998.) | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 6: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO STANDARDS AND ITU-T RECOMMENDATIONS. SECTION 601: FUNCTIONAL PROFILE FOR PROVIDING THE CONNECTION-ORIENTED TRANSPORT SERVICE IN END SYSTEM CONNECTED VIA... | |
| TELECONTROL EQUIPMENT AND SYSTEMS. PART 6: TELECONTROL PROTOCOLS COMPATIBLE WITH ISO STANDARDS AND ITU-T RECOMMENDATIONS. SECTION 802: TASE.2 OBJECT MODELS. (Endorsed by AENOR in June of 1998.) | |
| Teleprotection equipment of power systems - Performance and testing -- Part 1: Command systems | |
| Winding wires - Test methods - Part 2: Determination of dimensions | |
| Winding wires - Test methods - Part 3: Mechanical properties | |
| Winding wires - Test methods - Part 4: Chemical properties | |
| Winding wires - Test methods - Part 5: Electrical properties | |
| Winding wires - Test methods - Part 6: Thermal properties | |
| Winding wires - Test methods -- Part 1: General | |
| Winding wires - Test methods -- Part 2: Determination of dimensions | |
| Winding wires - Test methods -- Part 3: Mechanical properties | |
| Winding wires - Test methods -- Part 5: Electrical properties | |
| Winding wires - Test methods -- Part 6: Thermal properties | |
| WINDING WIRES. TEST METHODS. PART 1: GENERAL. | |
| WINDING WIRES. TEST METHODS. PART 2: DETERMINATION OF DIMENSIONS. . | |
| WINDING WIRES. TEST METHODS. PART 2: DETERMINATION OF DIMENSIONS. | |
| WINDING WIRES. TEST METHODS. PART 3: MECHANICAL PROPERTIES. | |
| WINDING WIRES. TEST METHODS. PART 5: ELECTRICAL PROPERTIES. | |
| WINDING WIRES. TEST METHODS. PART 6: THERMAL PROPERTIES. |
| << Prev | Next >> |