AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ACOUSTICS - GUIDELINES FOR NOISE CONTROL BY SILENCERS (ISO/DIS 14163:1996) | |
| ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESING OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - PART 3: SOUND PROPAGATION AND NOISE PREDICTION IN WORKROOMS (ISO/TR 11690-3:1997). | |
| Acoustics - Sound absorbers - Rating of sound absorption coefficients (ISO/DIS 11654:2018) | |
| ACOUSTICS - SOUND ABSORBERS FOR USE IN BUILDINGS- RATING OF SOUND ABSORPTION (ISO/DIS 11654:1994) | |
| Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low frequency transfer stiffness of resilient supports... | |
| ACOUSTICS AND VIBRATION. LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS. PART 1: PRINCIPLES AND GUIDELINES (ISO 10846-1:1997) | |
| ACOUSTICS AND VIBRATION. LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS. PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION. DIRECT METHOD (ISO 10846-2:1997) | |
| ACOUSTICS- MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND A BUILDING ELEMENTS - PART 4: FIELD MEASUREMENTS OF AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO/DIS 140-4:1996) | |
| ACOUSTICS- MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND A BUILDING ELEMENTS - PART 5: FIELD MEASUREMENTS OF AIRBORNE SOUND INSULATION OF FACADE ELEMENTS AND FACADES (ISO/DIS 140-5:1996) | |
| ACOUSTICS- MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND A BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS (ISO/DIS 140-6:1996) | |
| ACOUSTICS- MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND A BUILDING ELEMENTS - PART 7: FIELD MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS (ISO/DIS 140-7:1996). | |
| Agricultural and forestry machinery - Electromagnetic compatibility - Part 2: Additional EMC requirements for functional safety (ISO/DIS 14982-2:2021) | |
| Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria - Part 1: General EMC requirements (ISO/DIS 14982-1:2021) | |
| AGRICULTURAL AND FORESTRY MACHINES. ELECTROMAGNETIC COMPATIBILITY. TEST METHODS AND ACCEPTANCE CRITERIA (ISO/DIS 14982:1996) | |
| ANEASTHETIC GAS MONITORS (ISO 11196:1995) | |
| ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INDIVIDUAL AND TOTAL STEROL CONTENT - GAS CHROMATOGRAPHIC METHOD (ISO/DIS 12228:1997) | |
| BANKING. KEY MANAGEMENT (RETAIL). PART 1: INTRODUCTION TO KEY MANAGEMENT (ISO 11568-1:1994) | |
| BANKING. KEY MANAGEMENT (RETAIL). PART 3: KEY LIFE CYCLE FOR SYMMETRIC CIPHERS (ISO 11568-3:1994) | |
| Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO/DIS 10993-11:2025) | |
| Biological evaluation of medical devices - Part 16: Toxicokinetic evaluation for degradation products and leachables (ISO/DIS 10993-16:2025) | |
| Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO/DIS 10993-2:2024) | |
| Biological evaluation of medical devices - Part 3: Evaluation of genotoxicity, carcinogenicity, reproductive toxicity, and developmental toxicity (ISO/DIS 10993-3:2025) | |
| Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO/FDIS 10993-6:2025) | |
| Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO/FDIS 10993-7:2025) | |
| Biological evaluation of medical devices. Part 16: Toxicokinetic study design for degradation products and leachables (ISO/DIS 10993-16:1995) | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 1: EVALUATION AND TESTING (ISO/DIS 10993-1:1995) | |
| Brazing - Qualification test of brazers and brazing operators (ISO/DIS 13585:2020) | |
| Brazing - Qualification testing of brazers and brazing operators (ISO/DIS 13585:2026) | |
| Building construction - Organization of information about construction works - Part 2: Framework for classification and breakdown structures (ISO/DIS 12006-2:2025) | |
| CARBON FIBRE - DESIGNATION SYSTEM FOR FILAMENT YARNS (ISO/DIS 13002:1997) | |
| Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) | |
| Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO/DIS 13709:2001). | |
| Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) | |
| Cleanrooms and associated controlled environments - Part 12: Classification of air cleanliness by nanoscale particle concentration (ISO/DIS 14644-12:2013) | |
| Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO/FDIS 14644-15:2025) | |
| CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS. PART 1: CLASSIFICATION OF AIRBORNE PARTICULATE CLEANLINESS FOR CLEAN ROOMS AND CLEAN ZONES (ISO/DIS 4644-1:1996) | |
| Clinical investigation of medical devices for human subjects - Good clinical practice (ISO/FDIS 14155:2025) | |
| CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTIONS (ISO/DIS 11130:1997). | |
| Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) | |
| CORROSION OF METALS AND ALLOYS - SUCEPTIBILITY TO CAUSTIC INTERGRANULAR CORROSION AND STRESS CORROSION CRACKING OF ALLOYS USED IN NUCLEAR STEAM GENERATOR TUBING (ISO/DIS 12731:1997). | |
| CORROSION OF METALS AND ALLOYS. GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEAWATER. (ISO/DIS 11306:1996) | |
| DENTAL BRAZING INVESTMENTS (ISO 11244:1998) | |
| DENTAL CARTRIDGES FOR LOCAL ANAESTHETICS (ISO 11499:1997) | |
| DENTAL ETHYL SILICATE BONDED CASTING INVESTMENTS (ISO 11246:1996) | |
| DENTAL HANDPIECES. DENTAL LOW-VOLTAGE ELECTRICAL MOTORS (ISO 11498:1997) | |
| DENTAL IMPLANTS. PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS (ISO/DIS 14727:1997) | |
| Dentistry - Dentifrices - Requirements, test methods and marking (ISO/FDIS 11609:2026) | |
| Dentistry - Denture adhesives (ISO/FDIS 10873:2026) | |
| Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO/DIS 13504:2025) | |
| Dentistry - Powered polymerization activators (ISO/FDIS 10650:2026) | |
| DENTISTRY.TOOTHPASTE S. REQUIREMENTS, TEST METHODS AND MARKING. (ISO 11609:1995) | |
| DETERMINATION OF GOLD IN GOLD JEWELLERY ALLOYS. CUPELLATION METHOD (FIRE ASSAY) (ISO 11426:1997) | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved... | |
| Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014) | |
| Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols (ISO 10628-2:2012) | |
| DIESEL FUELS - DETERMINATION OF ALKYL NITRATE - SPECTROMETRIC METHOD (ISO/DIS 13759:1994) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2011) | |
| Electronic fee collection - Compliance check communication for autonomous systems (ISO 12813:2015) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 12813 - Part 1: Test suite structure and test purposes (ISO 13143-1:2016) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 12813 - Part 2: Abstract test suite (ISO 13143-2:2016) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 - Part 1: Test suite structure and test purposes (ISO 13140-1:2016) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 - Part 2: Abstract test suite (ISO 13140-2:2016) | |
| Electronic fee collection - Information exchange between service provision and toll charging (ISO 12855:2012) | |
| Electronic fee collection - Information exchange between service provision and toll charging (ISO 12855:2015) | |
| Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO 13141:2015) | |
| Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/DIS 14907-1:2025) | |
| Environmental management systems - Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation (ISO/FDIS 14005:2010) | |
| ENVIRONMENTAL MANAGEMENT SYSTEMS. SPECIFICATION WITH GUIDANCE FOR USE (ISO/DIS 14001:1995) | |
| ENVIRONMENTAL MANAGEMENT. LIFE CYCLE ASSESSMENT. PRINCIPLES AND FRAMEWORK (ISO/DIS 14040:1996) | |
| Environmental statements and programmes for products - Ecolabels (ISO/DIS 14024:2025) | |
| Environmental statements and programmes for products - Environmental product declarations (EPDs) (ISO/FDIS 14025:2026) | |
| Environmental statements and programmes for products - Self-declared environmental claims (ISO/DIS 14021:2025) | |
| ERGONOMIC REQUIREMENTS FOR WORK WITH VISUAL DISPLAY BASED ON FLAT PANELS. PART 1: INTRODUCTION (ISO/DIS 13406-1:1998) | |
| Ergonomics for the thermal environment - Evaluation of thermal environment in vehicles - Part 1: Principles and methods for assessment of thermal stress | |
| Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO/DIS 14505-2:2025) | |
| Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects (ISO/DIS 14505-3:2025) | |
| EXTRUDED SHEETS OF HIGH DENSITY POLYETHYLENE (PE-HD). REQUIREMENTS AND TEST METHODS (ISO/DIS 14632:1995) | |
| EXTRUDED SHEETS OF POLYPROPYLENE (PP) - REQUIREMENTS AND TEST METHODS (ISO/DIS 15013:1995) | |
| EXTRUDED SHEETS OF POLYVINYLIDENE FLUORIDE (PVDF) - REQUIREMENTS AND TEST METHODS (ISO/DIS 15014:1998) | |
| Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO/DIS 12312-2:2025) | |
| Fans - Efficiency classification for fans - Part 2: Standard losses for drive components (ISO/FDIS 12759-2:2018) | |
| Fans - Efficiency classification for fans - Part 3: Fans without drives at maximum operating speed (ISO/DIS 12759-3:2016) | |
| Fans - Performance testing of jet fans (ISO/DIS 13350:2018) | |
| Fans - Performance testing of jet fans (ISO/DIS 13350:2025) | |
| Fans - Vocabulary and definitions of categories (ISO/DIS 13349:2021) | |
| FIBRE REINFORCED PLASTIC COMPOSITES. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION (ISO/DIS 14126:1994) | |
| FIBRE REINFORCED PLASTIC COMPOSITES. DETERMINATION OF IN-PLANE SHEAR MODULUS AND STRENGTH BY +/-45 (TENSION TEST METHOD) (ISO/DIS 14129:1994) | |
| FIBRE REINFORCED PLASTICS COMPOSITES. DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT BEAM METHOD (ISO/DIS 14130:1994) | |
| FIBRE REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXUARAL PROPERTIES (ISO/DIS 14125:1994) | |
| FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS (ISO 11667:1997) | |
| FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE (ISO/DIS 12115:1995) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO/DIS 14705:2025) | |
| FIRE PROTECTION EQUIPMENT. SELF-CONTAINED SMOKE ALARMS (ISO/DIS 12239:1995) | |
| FOODSTUFFS - DETERMINATION OF OCHRATOXIN A - PART 1: HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD FOR WHEAT FLOUR (ISO/DIS 15141-1:1996) | |
| FOODSTUFFS - DETERMINATION OF OCHRATOXIN A- PART 2: HIGH PERFORMANCELIQUID CHROMATOGRAPHIC METHOD FOR BARLEY, MAIZEAND WHEAT BRAN (ISO/DIS 15141-2:1996) | |
| Footwear - Test method for slide fasteners - Lateral strength (ISO/DIS 10764:2008) | |
| Footwear - Test method for slide fasteners - Resistance to damage during closure under lateral force (ISO/DIS 10749:2008) | |
| Footwear - Test method for slide fasteners - Resistance to repeated opening and closing (ISO/DIS 10751:2008) | |
| Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO/DIS 10734:2008) | |
| GAS CYLINDERS. REFILLABLE SEAMLESS STEEL PRESSURE VESSELS FOR COMPRESSED GAS TRANSPORT OF WATER CAPACITY BETWEEN 150 L AND 3000 L. DESIGN AND TESTING (ISO/DIS 11120:1996) | |
| GEOMETRICAL PRODUCT SPECIFICATION (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING INSTRUMENTS - PART 1 : DECISION RULES FOR PROVING CONFORMANCE OR NON-CONFORMANCE WITH SPECIFICATIONS (ISO/DIS 14253-1:1996) | |
| GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE:PROFILE METHOD - MOTIF PARAMETERS (ISO 12085:1996) | |
| Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/FDIS 14405-1:2010) | |
| Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) | |
| Geometrical product specifications (GPS) - Surface texture: Profile - Calibration of contact (stylus) instruments (ISO/FDIS 12179:2026) | |
| GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTCS OF PHASE CORRECT FILTERS (ISO 11562:1996). | |
| GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING LINEAR MATERIAL RATIO CURVE (ISO 13565-2:1996) | |
| GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996). | |
| Geometrical product specifications (GPS). Straightness. Part 2: Specification operators (ISO/DIS 12780-2:2001) | |
| Geosynthetics - Static puncture test (CBR test) (ISO/FDIS 12236:2026) | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE CHARACTERISTIC OPENING SIZE | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE | |
| Glass in building - Assembly rules - Glazing wedges (ISO/DIS 14439:2007) | |
| Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2014) | |
| Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2014) | |
| Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2014) | |
| Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel-shaped glass (ISO/DIS 1288-4:2014) | |
| Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2014) | |
| GLASS IN BUILDING. GLAZING REQUIREMENTS. GLAZING BLOCKS (ISO/DIS 14439:1995) | |
| GLASS IN BUILDING. LAMINATED GLASS AND LAMINATED SAFETY GLASS. PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS. | |
| GLASS IN BUILDING. LAMINATED GLASS AND LAMINATED SAFETY GLASS. PART 2: LAMINATED SAFETY GLASS. | |
| GLASS IN BUILDING. LAMINATED GLASS AND LAMINATED SAFETY GLASS. PART 3: LAMINATED GLASS. | |
| GLASS IN BUILDING. LAMINATED GLASS AND LAMINATED SAFETY GLASS. PART 5: DIMENSIONS AND EDGE FINISHING. | |
| GLASS IN BUILDING. SPECIFICTION FOR SECURITY GLAZING. EXPLOSION, PRESSURE, RESISTANT GLAZING. CLASSIFICATION AND TEST METHOD (ISO/DIS 14440:1994) | |
| Glazing in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2007) | |
| Glazing in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2007) | |
| Glazing in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2007) | |
| Glazing in building - Determination of the bending strength of glass - Part 4: Testing of channel-shaped glass (ISO/DIS 1288-4:2007) | |
| Glazing in building - Determination of the bending strength of glass - Part 5: Coaxial double-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2007) | |
| Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements (ISO/DIS 12643-1:2014) | |
| Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO/DIS 12643-2:2014) | |
| Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2014) | |
| Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/DIS 12643-4:2014) | |
| Greenhouse gas management and related activities - Framework including principles and requirements for assessing and reporting investments and financing activities related to climate change (ISO 14097:2021) | |
| GUIDELINES FOR ENVIRONMENTAL AUDITING. AUDIT PROCEDURES. AUDITING OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/DIS 14011:1995) | |
| GUIDELINES FOR ENVIRONMENTAL AUDITING. GENERAL PRINCIPLES (ISO/DIS 14010:1995) | |
| GUIDELINES FOR ENVIRONMENTAL AUDITING. QUALIFICATION CRITERIA FOR ENVIRONMENTAL AUDITORS (ISO/DIS 14012:1995) | |
| Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) | |
| Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) | |
| Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) | |
| Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO/DIS 11148-13:2023) | |
| Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) | |
| Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) | |
| Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) | |
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) | |
| Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) | |
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of... | |
| Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume... | |
| HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES. SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE. PART 2: SAMPLING OF GASES (ISO/DIS 10882-2:1995) | |
| Health informatics — System of concepts to support continuity of care (ISO/DIS 13940:2025). | |
| Health informatics - Clinical knowledge resources - Metadata (ISO 13119:2012) | |
| Health Informatics - HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) (ISO 10781:2015) | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on substances (ISO/DIS 11238:2026) | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/DIS 11615:2026) | |
| Health informatics - Identification of medicinal products - Data elements and structures for unique identification and exchange of regulated pharmaceutical product information (ISO/DIS 11616:2025) | |
| Health informatics - Syntax to represent the content of healthcare classification systems - Classification Markup Language (ClaML) (ISO 13120:2013) | |
| Health informatics - System of concepts to support continuity of care (ISO/DIS 13940:2024) | |
| HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO/DIS 10642:1995) | |
| HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO/DIS 10664:1997) | |
| HOT DIP GALVANIZED COATINGS ON FABRICATED FERROUS PRODUCTS. SPECIFICATIONS (ISO/DIS 1461:1996) | |
| Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO/DIS 15027-1:2023) | |
| Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO/DIS 15027-2:2023) | |
| Immersion suits - Part 3: Test methods (ISO/DIS 15027-3:2023) | |
| Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015) | |
| In vitro diagnostic medical devices - Requirements for certified reference materials and the content of supporting documentation (ISO/DIS 15194:2023) | |
| In vitro diagnostic medical devices - Requirements for reference measurement procedures (ISO/DIS 15193:2023) | |
| Industrial furnaces and associated processing equipment - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (ISO/DIS 13578:2016) | |
| Intelligent transport systems - Geographic Data Files (GDF) - GDF5.0 (ISO 14825:2011) | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO... | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2: Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC) using... | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3: Location referencing for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO... | |
| Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO... | |
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam spatial stability (ISO/DIS 11670:2025) | |
| Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO/DIS 11640:2026) | |
| LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER (ISO 11642:1993) | |
| LEATHER. MEASUREMENT OF AREA. (ISO 11646:1993) | |
| LEATHER. TEST FOR COLOUR FASTNESS. COLOUR FASTNESS OF SMALL SAMPLES TO DRY-CLEANING SOLUTIONS (ISO 11643:1993) | |
| LEATHER. TEST FOR COLOUR FASTNESS. COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING | |
| Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts.(ISO/DIS 15147:1995) | |
| LIQUEFIED PETROLEUM GASES- ASSESSMENT OF THE DRYNESS OF PROPANE - VALVE FREEZE METHOD (ISO/DIS 13758:1994). | |
| MANIPULATING INDUSTRIAL ROBOTS. AUTOMATIC END EFFECTOR EXCHANGE SYSTEMS. VOCABULARY AND PRESENTATION OF CHARACTERISTICS (ISO 11593:1996) | |
| MECHANICAL VIBRATION AND SHOCK. GUIDANCE ON SAFETY OF TESTS AND EXPERIMENTS WITH PEOPLE. PART 1: EXPOSURE TO MECHANICAL VIBRATION AND REPEATED SHOCK (ISO/DIS 13090-1:1986) | |
| MECHANICAL VIBRATION AND SHOCK. HAND-ARM VIBRATION. METHOD FOR MEASURING THE VIBRATION TRANSMISSIBILITY OF RESILIENT MATERIALS WHEN LOADED BY THE HAND-ARM SYSTEM (ISO/DIS 13753:1996) | |
| Medical electrical equipment - Clinical performance evaluation of clinical thermometers (ISO/FDIS 12487:2026) | |
| Medical supply units (ISO/DIS 11197:2024) | |
| Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO/DIS 1456:2025) | |
| METALLIC COATINGS - POROSITY TESTS - HUMID SULFUR (FLOWERS OR SULFUR) TEST ) (ISO 12687:1996) | |
| Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO/DIS 148-1:2025) | |
| Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO/DIS 148-2:2025) | |
| Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch reference certified test pieces for indirect verification of pendulum impact testing machines (ISO/DIS 148-3:2025)... | |
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO/FDIS 14577-1:2026) | |
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO/FDIS 14577-2:2026) | |
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO/FDIS 14577-3:2026) | |
| Metallic materials - Unified method of test for the determination of quasistatic fracture toughness (ISO 12135:2021, including corrected version 2022-08) | |
| METALLIC MATERIALS. DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS (ISO 12737:1996) | |
| METHODS OF TEST FOR PALLET JOINTS- PART 1: DETERMINATION OF BENDING RESISTANCE OF PALLET NAILS, OTHER DOWEL-TYPE FASTENERS AND STAPLES (ISO 12777-1:1994) | |
| MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS-HORIZONTAL METHOD FOR THE DETECTION AND ENUMERATION OF LISTERIA MONOCYTOGENES-PART 2: ENUMERATION METHOD (ISO/DIS 11290-2:1996) | |
| Microbiology of the food chain - Detection, isolation and characterization of Shiga toxin-producing Escherichia coli (STEC) - Part 1: Horizontal method for the detection and isolation of Shiga toxin-producing Escherichia... | |
| Microbiology of the food chain - Detection, isolation and characterization of Shiga toxin-producing Escherichia coli (STEC) - Part 2: Horizontal method for the characterization of Shiga toxin-producing Escherichia coli (STEC)... | |
| Microbiology of the food chain, animal feed and water - Preparation, production, storage and performance testing of culture media and reagents (ISO/DIS 11133:2025) | |
| MODIFIED STARCHES. DETERMINATION OF CARBOXYL GROUP CONTENT OF OXIDIZED STARCH (ISO/DIS 11214:1994) | |
| Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010) | |
| Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensa tion method (ISO 10801:2010) | |
| Natural gas - Organic components used as odorants for fuel gases - Requirements and test methods (ISO/DIS 13734:2026) | |
| Natural gas - Vocabulary (ISO/DIS 14532:2025) | |
| NATURAL GAS. GUIDELINES TO TRACEABILITY IN ANALYSIS (ISO 14111:1997) | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO/DIS 11608-4:2016) | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO/FDIS 11608-5:2021) | |
| NON-ACTIVE SURGICAL IMPLANTS. GENERAL REQUIREMENTS (ISO/DIS 14630:1995) | |
| NON-ACTIVE SURGICAL IMPLANTS. IMPLANTS FOR OSTEOSYNTHESIS. PARTICULAR REQUIREMENTS. | |
| Non-destructive testing - Acoustic emission testing - Vocabulary (ISO/DIS 12716:2025) | |
| Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO/DIS 14096-1:2025) | |
| Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO/DIS 14096-2:2025) | |
| Nuclear energy - Nuclear fuel technology - Determination of neptunium in nitric acid solutions by spectrophotometry (ISO 13465:2024) | |
| Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium dioxide and plutonium dioxide powders by the BET method (ISO/DIS 12800:2026) | |
| Oil and gas industries including lower carbon energy - Materials for use in H2S-containing environments in oil and gas production - Part 1: Materials and materials processing requirements (ISO/DIS 15156-1:2025)... | |
| Oil and gas industries including lower carbon energy - Materials for use in H2S-containing environments in oil and gas production - Part 2: Service environment assessment and material selection (ISO/DIS... | |
| Oil and gas industries including lower carbon energy - Materials for use in H2S-containing environments in oil and gas production - Part 3: Verification, qualification and balloting requirements (ISO/DIS 15156-3:2025)... | |
| Oil and gas industries including lower carbon energy - Pipeline transportation systems - Requirements and guidance for pipeline life extension assessment (ISO/FDIS 12747:2025) | |
| OPHTALMIC OPTICS. SPECTACLE FRAMES. FUNDAMENTAL REQUIREMENTS AND TEST METHODS (ISO/DIS 12870:1996) | |
| Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO/FDIS 15004-2:2015) | |
| OPHTHALMIC OPTICS. BAR CODE SPECIFICATIONS. (ISO/DIS 13230:1997) | |
| OPTHALMIC INSTRUMENTS. CHART PROJECTORS (ISO/DIS 10938:1996) | |
| OPTHALMIC INSTRUMENTS. DIRECT OPTHALMOSCOPES (ISO/DIS 10942:1996) | |
| OPTHALMIC INSTRUMENTS. INDIRECT OPTHALMOSCOPES (ISO/DIS 10943:1996) | |
| OPTHALMIC INSTRUMENTS. RETINOSCOPES (ISO/DIS 12865:1996) | |
| OPTHALMIC INSTRUMENTS. TRIAL FRAMES (ISO/DIS 12867:1996) | |
| Opthalmic optics. Spectable lenses. Fundamental requirements for uncut finished spectacle lenses. (ISO/DIS 14889:1995) | |
| Opthalmic optics. Spectable lenses. Terms and definitions.(ISO/DIS 13666:1995) | |
| Optics and optical instruments. Contact lenses and contact lens care products. Fundamental requirements.(ISO/DI S 14534:1996) | |
| Optics and optical instruments. Contact lenses and contact lens care products. Guidelines for clinical investigacions.(ISO/ DIS 11980:1995) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES AND CONTACT LENS CARE PRODUCTS. METHODS FOR THE DETERMINATION OF THE PHYSICAL COMPATIBILITY OF CONTACT LENSES WITH CONTACT LENS CARE PRODUCTS (ISO/DIS 11981:1995). | |
| Optics and optical instruments. Contact lenses and contact lens care products. Test methods for the determination of shelf-life and in-use stability (ISO/DIS 13212:1995) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. AGEING BY UV AND VISIBLE RADIATION (IN VITRO METHOD) (ISO/DIS 11985:1995) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. DETERMINATION OF SCATTERED LIGHT OF CONTACT LENSES (ISO/DIS 12864:1995) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. METHODS FOR THE DETERMINATION OF SHELF-LIFE (ISO/DIS 11987:1995) | |
| Optics and optical instruments. Fundes cameras (ISO/DIS 10940:1995) | |
| OPTICS AND OPTICAL INSTRUMENTS. INTRAOCULAR LENSES. PART 5: BIOCOMPATIBILITY (ISO/DIS 11979-5:1997) | |
| OPTICS AND OPTICAL INSTRUMENTS. INTRAOCULAR LENSES. PART 6: DETERMINATION OF SHELF-LIFE AND TRANSPORT STABILITY (ISO/DIS 11979-6:1997) | |
| OPTICS AND OPTICAL INSTRUMENTS. LASERS AND LASER RELATED EQUIPMENT. TEST METHODS FOR LASER BEAM PARAMETERS: BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR. (ISO/DIS 11146) | |
| OPTICS AND OPTICAL INSTRUMENTS. LASERS AND LASER RELATED EQUIPMENT. TEST METHODS FOR LASER BEAM PARAMETERS: POWER, ENERGY AND TEMPORAL CHARACTERISTICS. | |
| OPTICS AND OPTICAL INSTRUMENTS. LASERS AND LASER-RELATED EQUIPMENT. TEST METHOD FOR ABSORPTANCE OF OPTICAL LASER COMPONENTS (ISO/DIS 11551:1994) | |
| OPTICS AND OPTICAL INSTRUMENTS. OPHTALMIC OPTICS. SLIT-LAMP MICROSCOPES (ISO/DIS 10939:1995) | |
| Optics and optical instruments. Ophthalmic instruments. Fundamental requirements and test methods. (ISO/DIS 15004) | |
| OPTICS AND OPTICAL INSTRUMENTS. OPTHALMIC INSTRUMENTS. SYNOPTOPHORES (ISO/DIS 10944:1996) | |
| Optics and photonics - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO/DIS 11551:2025) | |
| Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam irradiance (fluence) distribution (ISO/DIS 13694:2025) | |
| Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2015) | |
| Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) | |
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) | |
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO/DIS 11145:2025) | |
| Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties (ISO 14880-1:2016) | |
| OSCILLATION-TYPE DENSITY METERS. PART 1: LABORATORY INSTRUMENTS (ISO/FDIS 15212-1:1998) | |
| Packaging for terminally sterilized medical devices - Part 3: Requirements for process development for forming, sealing and assembly (ISO/DIS 11607-3:2025) | |
| PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 11341:1994) | |
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO/FDIS 12944-6:2007) | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO/DIS 11997-1:2025) | |
| Paints and varnishes - Determination of wet-scrub resistance of coatings (ISO/DIS 11998:2025) | |
| PERIODONTAL CURETTES, DENTAL SCALERS AND EXCAVATORS. PART 4: DENTAL EXCAVATORS. DISCOID-TYPE. (ISO/DIS 13397-4:1996) | |
| PETROLEUM AND GAS NATURAL INDUSTRIES. DRILLING EQUIPMENT (ISO/DIS 14693:2002) | |
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2008) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO/DIS 13628-1:2003) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:2010) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems (ISO 13628-8:2002) | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000) | |
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2000). | |
| PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - INSPECTION, MAINTENANCE, REPAIR AND REMANUFACTURE OF HOISTING EQUIPTMENT (ISO/DIS 13534:1997). | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment (ISO 13624-1:2009) | |
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation (ISO 13501:2005) | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1:General principles for selection of cracking-resistant materials (ISO 15156-1:2001) | |
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE STRUCTURES - PART 1: GENERAL REQUIREMENTS (ISO 13819-1:1995) | |
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002) | |
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) | |
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO/DIS 15136-1:2025) | |
| Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008) | |
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001). | |
| Petroleum and natural gas industries- Drilling and production equipment - Drill-through equipment (ISO 13533:1999) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES. BALL CHECK, GATE AND PLUG VALVES. SPECIFICATION (ISO/DIS 14313:1996) | |
| Petroleum and natural gas industries. Materials for use in H2S- containing environments in oil and gas production. Part 2: Cracking-resistant carbon and low alloy steels (ISO/DIS 15156-2:2001) | |
| Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 3: Cracking-resistant CRAs (Corrosion resistant alloys) and other alloys (ISO/DIS 15156-3:2002) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES. OFFSHORE PLATFORM SYSTEMS. FUNCTIONAL REQUIREMENTS AND GUIDELINES FOR THE CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS (ISO/DIS 13702:1996) | |
| Petroleum and natural gas industries. Reciprocating compressors (ISO/FDIS 13707:2000) | |
| PETROLEUM AND NATURAL GAS INDUSTRIES. STEEL PIPES FOR USE AS DRILL PIPE. SPECIFICATION (BASED ON API SPEC 7) (ISO/DIS 11961:1994) | |
| Petroleum and related products - Determiantio of spray ignition characteristics of fire-resistant fluids - Part 2: Spray test - Stabilized frame heat release spray method (ISO/DIS 15029-2:2006) | |
| PETROLEUM AND RELATED PRODUCTS. DETERMINATION OF WICK FLAME PERSISTENCE OF FIRE-RESISTANT FLUIDS (ISO/DIS 14935:1996) | |
| PETROLEUM PRODUCTS . DETERMINATION OF VANADIUM AND NICKEL CONTENT. WAVELENGTH-DISPERSIV E X-RAY FLUORESCENCE SPECTROMETRY (ISO 14597:1997) | |
| PETROLEUM PRODUCTS. DETERMINATION OF FLASH POINT. ABEL CLOSED CUP METHOD (ISO/DIS 13736:1994) | |
| PETROLEUM PRODUCTS. DETERMINATION OF SULFUR CONTENT. WAVELENGTH-DISPERSIV E X-RAY FLUORESCENCE SPECTROMETRY (ISO/DIS 14596:1996) | |
| PIPEWORK. CORRUGATED FLEXIBLE METALLIC HOSE ASSEMBLIES FOR THE PROTECTION OF ELECTRICAL CABLES IN EXPLOSIVE ATMOSPHERES (ISO 10807:1994) | |
| Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 4: Thermoplastic composite materials (ISO/DIS 11300-4:2025) | |
| Piping systems for rehabilitation of underground drains, sewers and water supply networks-Part 2: Thermoset composite materials (ISO/DIS 11300-2:2025) | |
| Piping systems for rehabilitation of underground gas supply networks - Part 1: Polyethylene (PE) material (ISO/FDIS 11301-1:2026) | |
| PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A (ISO/DIS 10673:1996) | |
| PLASTICS - CONDENSATION RESINS - DETERMINATION OF FREE FORMALDEHYDE (ISO 11402:1993) | |
| PLASTICS - FREE FLOWING PHENOLIC (PF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 1: DESIGNATION AND BASIS FOR SPECIFICATIONS (ISO/DIS 14526-1:1997) | |
| PLASTICS - FREE FLOWING PHENOLIC (PF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 14526-2:1997) | |
| PLASTICS - FREEE FLOWING PHENOLIC (PF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 3: REQUIREMENTS FOR SELECTED PF MOULDING MATERIALS (ISO/DIS 14526-3:1997) | |
| Plastics - Guidance for the use of standard fire tests (ISO/DIS 10840:2025) | |
| PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF PH OF AQUEOUS EXTRACT (ISO 1264:1980) | |
| PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 1060-1:1998) | |
| PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - PART 2: PREPARATION OF TEST SAMPLES AND DETERMINATION OF PROPERTIES (ISO 1060-2:1998) | |
| PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 4: GAS PYKNOMETER METHOD (ISO/DIS 1183-4:1998) | |
| PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETERMINATION OF FREE AMMONIUM COMPOUNDS - COLORIMETRIC COMPARISON METHOD (ISO 120:1977) | |
| PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETERMINATION OF FREE PHENOLS - IODOMETRIC METHOD (ISO 119:1977) | |
| PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY (ISO 11409:1993) | |
| PLASTICS - PHENOLIC RESINS - SEPARATION BY LIQUID CHROMATOGRAPHY (ISO 11401:1993) | |
| PLASTICS - POLIVINYL CHLORIDE RESINS - DETERMINATION OF NUMBER OF IMPURITIES AND FOREIGN PARTICLES (ISO 1265:1979) | |
| PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS. (ISO 1110:1995). | |
| PLASTICS - POLYTETRAFLUOROETHYL ENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION (ISO/DIS 13000-1:1996) | |
| PLASTICS - POLYTETRAFLUOROETHYL ENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 13000-1:1996) | |
| PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - DISSOLVER METHOD (ISO 11468:1997) | |
| Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO/DIS 13760:2026) | |
| PLASTICS. CELLULOSE ACETATE IN DILUTE SOLUTION. DETERMINATION OF VISCOSITY NUMBER AND VISCOSITY RATIO (ISO 1157:1990) | |
| PLASTICS. FREE-FLOWING EPOXI-RESIN (EP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO/DIS 15252-1:1997) | |
| PLASTICS. FREE-FLOWING EPOXY-RESIN (EP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 15252-2:1997) | |
| PLASTICS. FREE-FLOWING MELAMINE-FORMALDEHYD E (MF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 1: DESIGNATION AND BASIS FOR SPECIFICATIONS (ISO/DIS 14528-1:1997) | |
| PLASTICS. FREE-FLOWING MELAMINE-FORMALDEHYD E (MF) COMPRESSION-AND INJECTION- MOULDING MATERIALS. PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 14528-2:1997) | |
| PLASTICS. FREE-FLOWING MELAMINE/FORMALDEHYD E (MF) COMPRESSION-AND INJECTION-MOULDING MATERIALS. PART 3: REQUIREMENTS FOR SELECTED MF MOULDING MATERIALS (ISO/DIS 14528-3:1997) | |
| PLASTICS. FREE-FLOWING MELAMINE/PHENOLIC (MP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 3: REQUIREMENTS FOR SELECTED MP MOULDING MATERIALS (ISO/DIS 14529-3:1997) | |
| PLASTICS. FREE-FLOWING MELAMINE/PHENOLIC (MP) COMPRESSION AND INJECTION, MOULDING MATERIALS. PART 1: DESIGNATION AND BASIS FOR SPECIFICATIONS (ISO/DIS 14529-1:1997) | |
| PLASTICS. FREE-FLOWING MELAMINE/PHENOLIC (MP) COMPRESSION-AND INJECTION- MOULDING MATERIALS. PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 14529-2:1997) | |
| PLASTICS. FREE-FLOWING UNSATURATED-POLYESTE R (UP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 1: DESIGNATION AND BASIS FOR SPECIFICATIONS (ISO/DIS 14530-1:1997) | |
| PLASTICS. FREE-FLOWING UNSATURATED-POLYESTE R (UP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 14530-2:1997) | |
| PLASTICS. FREE-FLOWING UNSATURATED-POLYESTE R (UP) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 3: REQUIREMENTS FOR SELECTED UP MOULDING MATERIALS (ISO/DIS 14530-3:1997) | |
| PLASTICS. FREE-FLOWING UREA-FORMALDEHYDE (UF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 1: DESIGNATION AND BASIS FOR SPECIFICATIONS (ISO/DIS 14527-1:1997) | |
| PLASTICS. FREE-FLOWING UREA-FORMALDEHYDE (UF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO/DIS 14527-2:1997) | |
| PLASTICS. FREE-FLOWING UREA-FORMALDEHYDE (UF) COMPRESSION - AND INJECTION - MOULDING MATERIALS. PART 3: REQUIREMENTS FOR SELECTED UF MOULDING MATERIALS (ISO/DIS 14527-3:1997) | |
| Powered industrial trucks - Test methods for verification of visibility - Part 1: Sit-on and stand-on operator trucks up to and including 10 t capacity (ISO/DIS 13564-1:2007) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINT AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 7: FUSED ALUMINIUM OXIDE (ISO 11126-7:1995) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO/DIS 11124-1:2025) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 1: GENERAL INTRODUCTION AND CLASSIFICATION (ISO 11126-1:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 4: COAL FURNACE SLAG (ISO 11126-4:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 5: NICKEL REFINERY SLAG (ISO 11126-5:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 3: COPPER REFINERY SLAG. (ISO 11126-3:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6: IRON FURNACE SLAG. (ISO 11126-6:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 6: DETERMINATION OF FOREIGN MATTER. (ISO 11125-6:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 7: DETERMINATION OF MOISTURE. (ISO 11125-7:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES .PART 4: ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (ISO 11127-4:1993)... | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1: SAMPLING. (ISO 11127-1:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. (ISO 11127-2:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5: DETERMINATION OF MOISTURE. (ISO 11127-5:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES.PART 3: DETERMINATION OF APPARENT DENSITY. (ISO 11127-3:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVESPART 6: DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT (ISO 11127-6:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVESPART 7: DETERMINATION OF WATER-SOLUBLE CHLORIDES (ISO 11127-7:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS- SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 8: OLIVINE SAND. (ISO 11126-8:1993) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS-SPECIFICATI ONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 2: CHILLED-IRON GRIT. (ISO 11124-2:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS-SPECIFICATI ONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 3: HIGH-CARBON CAST-STEEL SHOT AND GRIT. (ISO 11124-3:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS-SPECIFICATI ONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 4: LOW-CARBON CAST-STEEL SHOT. (ISO 11124-4:1993). | |
| PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES. METAL COATINGS. GUIDELINES (ISO/DIS 14713:1996) | |
| Protective clothing - Body armour - Part 4: Needle and spike stab resistance - Requirements and test methods (ISO/DIS 14876-4:2002) | |
| Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2013) | |
| Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2024) | |
| Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO/DIS 14116:2024) | |
| Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing (ISO/DIS 14116:2013) | |
| Protective clothing against heat and flame - Test method for complete garments -Pediction of burn injury using an instrumented manikin (ISO/DIS 13506:2004) | |
| Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO/DIS 14460:2023) | |
| PROTECTIVE CLOTHING FOR AUTOMOBILE RACING DRIVES. PERFORMANCE REQUIREMENTS AND TEST METHODS. (ISO/DIS 14460:1996) | |
| Protective clothing for use in welding and allied processes (ISO/DIS 11611:2013) | |
| Protective clothing for use in welding and allied processes (ISO/FDIS 11611:2024) | |
| PULPS - DETERMINATION OF ACETONE-SOLUBLE MATTER (ISO 14453:1997) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO/DIS 14451-10:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Vocabulary (ISO/DIS 14451-1:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 2: Test methods (ISO/DIS 14451-2:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO/DIS 14451-3:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators (ISO/DIS 14451-4:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements and categorization for airbag gas generators (ISO/DIS 14451-5:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 6: Requirements and categorization for airbag modules (ISO/DIS 14451-6:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 7: Requirements and categorization for seatbelt pretensioners (ISO/DIS 14451-7:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO/DIS 14451-8:2026) | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 9: Requirements and categorization for actuators (ISO/DIS 14451-9:2026) | |
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO/DIS 11102-1:2020) | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. HANDLE STARTING EQUIPMENT. PART 1: SAFETY REQUIREMETS AND TESTS (ISO/DIS 11102-1:1995) | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. HANDLE STARTING EQUIPMENT. PART 2: METHOD OF TESTING THE ANGLE OF DESENGAGEMENT (ISO/DIS 11102-2:1995) | |
| RECIPROCATING POSITIVE DISPLACEMENT PUMPS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES - TECHNICAL SPECIFIATIONS (ISO/DIS 13710:1999) | |
| Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO/DIS 1089:2021) | |
| Rice - Determination of biometric characteristics of kernels (ISO/FDIS 11746:2019) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011) | |
| Road vehicles - Vehicle to grid communication interface - Part 2: Network and application protocol requirements (ISO/DIS 15118-2:2018) | |
| Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO/DIS 15118-4:2021) | |
| Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO/DIS 15118-4:2024) | |
| Road vehicles - Vehicle-to-grid communication interface - Part 2: Network and application protocol requirements (ISO/DIS 15118-2:2022) | |
| Road vehicles - Vehicle-to-Grid Communication Interface - Part 2: Network and application protocol requirements (ISO/DIS 15118-2:2025) | |
| ROAD VEHICLES. TRAFFIC INFORMATION AND CONTROL SYSTEMS. ERGONOMICS ASPECTS OF IN-VEHICLE VISUAL PRESENTATION OF INFORMATION.. PART 1: SPECIFICATIONS (ISO/DIS 15008-1:1998) | |
| Robotics - Safety requirements for service robots (ISO/DIS 13482:2024) | |
| ROTARY POSITIVE DISPLACEMENT PUMPS. GENERAL REQUIREMENTS (ISO/DIS 14847:1995) | |
| Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks (ISO/DIS 10896-2:2025) | |
| RUBBER AND PLASTIC HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE (ISO 11758:1995) | |
| RUBBER AND PLASTICS HOSES . ASSESMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS (ISO 10960:1994) | |
| RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. HYDROSTATIC TESTING (ISO 1402:1994) | |
| RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 1403:1995) | |
| Rubber hoses, textile-reinforced, for general-purpose water applications — Specification (ISO/DIS 1403:2026) | |
| RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK. (ISO/DIS 1421:1995) | |
| Safety of machinery - Anthropometric requirements for the design of workstations for industries and services (ISO/DIS 14738:2020) | |
| Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO/DIS 12100:2025) | |
| Safety of machinery - Identification of whole body access and prevention of associated risk(s) (ISO/DIS 12895:2025) | |
| Safety of machinery - Integration of machinery into a system - Basic requirements (ISO/DIS 11161:2023) | |
| Safety of machinery - Integration of machinery into a system - Basic requirements (ISO/DIS 11161:2024) | |
| Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO/DIS 11553-2:2016) | |
| Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held or hand-operated laser processing machines (ISO/DIS 11553-2:2025) | |
| Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO/DIS 13849-2:2026) | |
| SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS. PART 1: WASHER HARDNESS CLASSES 200 HV AND 300 HV (ISO/DIS 10644-1:1996) | |
| Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO/DIS 12401:2025) | |
| Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2019) | |
| Small craft - Hull construction and scantlings - Part 7: Scantling determination of multihulls (ISO/DIS 12215-7:2006) | |
| Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO/FDIS 12215-9:2026) | |
| Small craft - Man-overboard prevention and recovery (ISO/DIS 15085:2014) | |
| Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats (ISO/DIS 12217-1:2026) | |
| Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats (ISO/DIS 12217-2:2026) | |
| Small craft - Watertight or quick-draining recesses and cockpits (ISO/FDIS 11812:2019) | |
| Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO/FDIS 12216:2019) | |
| Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO 11504:2017) | |
| Soil quality - Determination of dry bulk density (ISO 11272:2017) | |
| Soil quality - Determination of particle density (ISO 11508:2017) | |
| Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2014) | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid... | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO... | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid... | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 5: Extraction of humic substances from aqueous samples (ISO 12782-5:2012) | |
| Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO/FDIS 13196:2026) | |
| Soil quality - Vocabulary (ISO 11074:2015) | |
| SOLDER PASTES. PART 1: CLASSIFICATION AND TEST METHODS (ISO/DIS 12226-1:1997) | |
| SOLDER WIRE, SOLID AND FLUX CORED - SPECIFICATION AND TEST METHODS. PART 1: CLASSIFICATION AND PERFORMANCE REQUIREMENTS (ISO 12224-1:1997). | |
| SPACE SYSTEMS. SAFETY REQUIREMENTS. PART 1: SYSTEM SAFETY (ISO/DIS 14620-1:1998) | |
| SPLIT PINS. METRIC SERIES (ISO/DIS 1234:1994) | |
| SPRING-TYPE STRAIGHT PINS. SLOTTED, LIGHT DUTY (ISO/DIS 13337:1994) | |
| STEEL AND IRON. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD. (ISO 10700:1994) | |
| Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017) | |
| Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO/FDIS 15236-3:2025) | |
| Sterilization of health care products - Chemical indicators - Part 3: Type 2 indicators for use in the Bowie and Dick-type steam penetration test (ISO/DIS 11140-3:2025) | |
| Sterilization of health care products - Chemical indicators - Part 4: Type 2 indicator systems as an alternative to the Bowie and Dick-type test for the detection of steam penetration... | |
| Sterilization of health care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO/DIS 11135:2024) | |
| Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO/DIS 11737-1:2026) | |
| Sterilization of health care products - Microbiological methods - Part 3: Bacterial endotoxin testing (ISO 11737-3:2023) | |
| Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO/DIS 11137-1:2023) | |
| Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO/DIS 11135:2025) | |
| STERILIZATION OF MEDICAL DEVICES. VALIDATION AND ROUTINE CONTROL OF STERILIZATION OF SINGLE-USE MEDICAL DEVICES INCORPORATING MATERIALS OF ANIMAL ORIGIN BY LIQUID CHEMICAL STERILANTS (ISO/DIS 14160:1995) | |
| Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017) | |
| Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:2017) | |
| Testing of ceramic materials - Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials - Part 1: Infrared measurement methods (ISO 14720-1:2026) | |
| Testing of ceramic materials - Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP-OES) or ion chromatography (IC)... | |
| Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013)... | |
| Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission... | |
| Textile floor coverings. Determination of resistance to damage at cut edges using modified Vettermann drum test (ISO/DIS 10833:2008) | |
| TEXTILE-GLASS-REINFO RCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS (ISO 1172:1996) | |
| Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 3: Random tumble pilling method (ISO/DIS 12945-3:2006) | |
| Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO/DIS 11092:2025) | |
| Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO/FDIS 13935-2:2026) | |
| TEXTILES - TESTS FOR COLOUOR FASTNESS - PART X13: COLOUR FASTNESS OF WOOL DYES TO PROCESSES USING CHEMICAL MEANS FOR CREASING, PLEATING AND SETTING (ISO 105-X13:1994) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART X06:COLOUR FASTNESS TO SODA BOILING (ISO 105-X06:1994) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART X07:COLOUR FASTNESS TO CROSS-DYIENG:WOOL (ISO 105-X07:1994). | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART X08: COLOUR FASTNESS TO DEGUMMING (ISO 105-X08:1994) | |
| Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing (ISO/DIS 105-X11:2024) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z03: INTERCOMPABILITY OF BASIC DYES FOR ACRYLIC FIBRES (ISO 105-Z03:1996) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z04: DISPERSIBILITY OF DISPERSE DYES (ISO 105-Z04:1995) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z05: DETERMINATION OF THE DUSTING BEHAVIOUR OF DYES (ISO 105-Z05:1996) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z07: DETERMINATION OF APPLICATION SOLUBILITY AND SOLUTION STABILITY OF WATER-SOLUBLE DYES (ISO 105-Z07:1995) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z08: DETERMINATION OF SOLUBILITY AND SOLUTION STABILITY OF REACTIVE DYES IN THE PRESENCE OF ELECTROLYTES (ISO 105-Z08:1995) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z09: DETERMINATION OF COLD WATER SOLUBILITY OF WATER-SOLUBLE DYES (ISO 105-Z09:1995) | |
| TEXTILES AND TEXTILE PRODUCTS. BURNING BEHAVIOUR. INDUSTRIAL AND TECHNICAL TEXTILES. DETAILES PROCEDURE TO DETERMINE THE BURNING BEHAVIOUR OF AIR FILTERS. IGNITABILITY (ISO/DIS 13009:1994) | |
| TEXTILES. BURSTING PROPERTIES OF FABRICS. PART 1: DETERMINATION OF BUSRSTING STRENGTH AND BUSRTING DISTENTION. HYDRAULIC METHOD (ISO/DIS 13938-1:1995) | |
| TEXTILES. BURSTING PROPERTIES OF FABRICS. PART 2: DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENTION. PNEUMATIC METHOD (ISO/DIS 13938-2:1995) | |
| Textiles. Determination of abrasion resistance of fabrics by the Mardindale method. Part 4: Assessment of appearance change. (ISO/DIS 12947-4:1995). | |
| Textiles. Determination of abrasion resistance of fabrics by the martindale method. Part 1: Martindale abrasion testing apparatus (ISO/DIS 12947-1:1995) | |
| Textiles. Determination of abrasion resistance of fabrics by the Martindale method. Part 2: Determination of specimen breakdows. (ISO/DIS 12947-2:1995) | |
| Textiles. Determination of abrasion resistance of fabrics by the Martindale method. Part 3: Determination of mass lossbreak. (ISO/DIS 12947-3:1995) | |
| TEXTILES. METHODS FOR ASSESSING THE EFFECT OF DOMESTIC WASHING ON THE FLAMMABILITY OF TEXTILE FABRICS (ISO/DIS 12138:1994) | |
| TEXTILES. OIL REPELLENCY. HYDROCARBON RESISTANCE TEST (ISO 14419:1998) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z10: DETERMINATION OF RELATIVE COLOUR STRENGTH OF DYES IN SOLUTION (ISO 105-Z10:1997) | |
| Thermal spraying - Qualification testing of thermal sprayers (ISO/DIS 14918:2025) | |
| Tissue paper and tissue products - Part 10: Determination of demand water absorption rate and capacity, under controlled hydraulic pressure (ISO/DIS 12625-10:2006) | |
| Tissue paper and tissue products. Part 13: Determination of the spectral reflectance factor (brightness) at the wavelength R457 nm with and without UV stimulus and opacity (ISO/DIS 12625-13:2009) | |
| TRACTORS AND SELF PROPELLED MACHINERY FOR AGRICULTURE AND FORESTRY. RIDE ON MACHINES. OPERATOR CONTROLS. ACTUATING FORCES, DISPLACEMENT, LOCATION AND METHOD OF OPERATION (ISO/DIS 15077:1996) | |
| TRANSPORTABLE GAS CYLINDERS. COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS. PART 1: METALLIC MATERIALS (ISO/DIS 11114-1:1995) | |
| TRANSPORTABLE GAS CYLINDERS. FITTING OF VALVES TO GAS CYLINDERS (ISO/DIS 13341:1995) | |
| Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO/DIS 11177:2025) | |
| WALKING AIDS MANIPULATED BY ONE ARM. REQUIREMENTS AND TEST METHODS. PART 1: ELBOW CRUTCHES (ISO 11334-1:1994) | |
| WALKING AIDS MANIPULATED USING BOTH ARMS. REQUIREMENTS AND TEST METHODS. PART 1: WALKING FRAMES (ISO/DIS 11199-1:1996) | |
| WALKING AIDS MANIPULATED USING BOTH ARMS. REQUIREMENTS AND TEST METHODS. PART 2: ROLLATORS (ISO/DIS 11199-2:1996) | |
| WATER QUALITY - DETERMINATION OF 33 ELEMENTS BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROSCOPY (ISO 11885:1996). | |
| WATER QUALITY - DETERMINATION OF THE INHIBITORY EFFECT OF WATER SAMPLES ON THE LIGHT EMISSION OF VIBRIO FISCHERI (LUMINESCENT BACTERIA TEST) - PART 2: METHOD USING LIQUID-DRIED BACTERIA (ISO/DIS 11348-2:1996)... | |
| WATER QUALITY - DETERMINATION OF THE INHIBITORY EFFECT OF WATER SAMPLES ON THE LIGHT EMISSION OF VIBRIO FISCHERI (LUMINESCENT BACTERIA TEST) - PART 3: METHOD USING FREEZE-DRIED BACTERIA (ISO/DIS 11348-3:1996). | |
| WATER QUALITY - DETERMINATION OF THE INHIBITORY EFFECT OF WATER SAMPLES ON THE LIGHT EMISSION OF VIBRIO FISCHERI (LUMINESCENT BACTERIA TEST9 - PART 1: METHOD USING FRESHLY PREPARED BACTERIA (ISO/DIS... | |
| Water quality - Enumeration of culturable microorganisms - Colony count by spread plate inoculation on R2A medium (ISO/DIS 13647:2025) | |
| WATER QUALITY - EVALUATION IN AN AQUEOUS MEDIUM OF THE "ULTIMATE" AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS - METHOD BY ANALYSIS OF BIOCHEMICAL OXYGEN DEMAND (CLOSED BOTTLE TEST) (ISO 10707:1994) | |
| Water quality - Gross alpha and gross beta activity - Test method using liquid scintillation counting (ISO/DIS 11704:2025) | |
| Water quality - Gross alpha and gross beta activity - Test method using thin source deposit (ISO/DIS 10704:2025) | |
| Water quality - Radon-222 - Part 1: General principles (ISO/DIS 13164-1:2026) | |
| Water quality - Radon-222 - Part 3: Test method using emanometry (ISO/DIS 13164-3:2026) | |
| Water quality - Uranium - Test method using alpha liquid scintillation counting (ISO/DIS 13169:2025) | |
| WATER QUALITY. DETERMINATION OF DISSOLVED LI, NA, NH4, K, MN2, CA2, MG2, SR2 AND BA2 USING ION CHROMATOGRAPHY. METHOD FOR WATER AND WASTE WATER (ISO 14911:1998) | |
| WATER QUALITY. DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA) (ISO/DIS 14402:1998) | |
| Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction. (ISO/DIS 11369:1995) | |
| WELDING. ARC STUD WELDING OF METALLIC MATERIALS (ISO/DIS 14555:1995) | |
| Welding. Studs for arc stud welding. | |
| Workplace air - Assessment of dermal exposure - Part 1: Framework for dermal exposure assessment (ISO/FDIS 13977-1:2026) |
| << Prev | Next >> |