AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
80
90
100
110
120
130
134
135
136
137
138
139
140
141
142
143
144
145
146
150
160
170
180
| Product Name | Notes |
|---|---|
| 3D Display devices - Part 1-2: Generic - Terminology and letter symbols (Endorsed by AENOR in October of 2013.) | |
| 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical (Endorsed by AENOR in July of 2013.) | |
| AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation | |
| Accessibility terms and definitions (Endorsed by Asociación Española de Normalización in January of 2018.) | |
| ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - PART 1: DETERMINATION OF TENSILE PROPERTIES (Endorsed by AENOR in July of 1998.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties (Endorsed by AENOR in January of 2003.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength. (Endorsed by AENOR in October of 2002.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens (Endorsed by AENOR... | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR... | |
| AGRICULTURAL MACHINERY. COMBINE HARVESTERS AND FORAGE HARVESTERS. SAFETY. | |
| Analysis techniques for dependability - Petri net techniques (Endorsed by AENOR in January of 2013.) | |
| Analysis techniques for dependability - Petri net techniques | |
| Articulated systems and flexible systems for cable guiding | |
| Audio Archive System - Part 1-1: DVD disk and data migration for long term audio data storage (Endorsed by AENOR in August of 2016.) | |
| Audio Archive System - Part 1-1: DVD disk and data migration for long term audio data storage (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Audio reproduction method for normalized loudness level (Endorsed by AENOR in July of 2016.) | |
| Audio reproduction method for normalized loudness level (Endorsed by Asociación Española de Normalización in October of 2019.) | |
| Audio, video and information technology equipment - Routine electrical safety testing in production (Endorsed by AENOR in May of 2016.) | |
| Audio, video and multimedia systems - General channel assignment of multichannel audio (Endorsed by AENOR in October of 2012.) | |
| Audio, video and multimedia systems and equipment - Digital television accessibility - Functional specifications (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books (Endorsed by Asociación Española de Normalización in March of 2018.) | |
| Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface (Endorsed by AENOR in October of 2012.) | |
| Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing (Endorsed by AENOR in October of 2012.) | |
| Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Building intercom systems - Part 1-1: System requirements - General (Endorsed by Asociación Española de Normalización in February of 2022.) | |
| Building intercom systems - Part 1-1: System requirements - General (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (Endorsed by AENOR in June of 2011.) | |
| Cement-bonded particleboards - Definition and classification | |
| Cement-bonded particleboards - Specification - Part 1: General requirements | |
| Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions | |
| CEMENT-BONDED PARTICLEBOARDS. SPECIFICATIONS. PART 2: REQUIREMENTS FOROPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERIOR CONDITIONS. | |
| Cleaning robots for household use - Dry cleaning: Methods of measuring performance | |
| Common requirements for concrete pressure pipes including joints and fittings | |
| Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500V- Definitions, test methods and acceptance criteria (Endorsed by Asociación... | |
| Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500V- Definitions, test methods and acceptance criteria | |
| Computation of waveform parameter uncertainties (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability (Endorsed by Asociación Española de Normalización in September of 2017.) | |
| Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability | |
| Connectors for DC-application in photovoltaic systems - Safety requirements and tests | |
| Current and Voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: general principles and requirements (Endorsed by Asociación Española de Normalización in March of... | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 2: System aspects (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (Endorsed by AENOR in July of 2015.) | |
| Demonstration of dependability requirements - The dependability case | |
| Desktop and notebook computers - Measurement of energy consumption (Endorsed by AENOR in March of 2013.) | |
| Device embedded substrate - Part 1-1: Generic specification - Test methods (Endorsed by AENOR in August of 2015.) | |
| Dielectric and resistive properties of solid insulating materials - Part 1: General | |
| Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (Endorsed by AENOR in... | |
| Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)... | |
| Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance (Endorsed by AENOR in April of 2016.) | |
| Digital audiobook file format and player requirements (Endorsed by AENOR in October of 2012.) | |
| Digital load side transmission lighting control - Part 1: Basic requirements (Endorsed by AENOR in September of 2015.) | |
| Digital Terrestrial Television Receivers for the DTMB system (Endorsed by AENOR in November of 2015.) | |
| Digital video interface - Gigabit video interface for multimedia systems (Endorsed by AENOR in July of 2015.) | |
| Document kinds for Electrical and Instrumentation Projects in the Process Industry (Endorsed by AENOR in June of 2015.) | |
| Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications | |
| Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics (Endorsed by AENOR in February of 2011.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: general requirements (Endorsed by Asociación Española de Normalización in June of 2022.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-10: Particular requirements for hand-held mixers (Endorsed by Asociación Española de Normalización in August of... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (Endorsed by AENOR in May of 2016.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (Endorsed by Asociación Española de Normalización in July... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-17: Particular requirements for hand-held routers (Endorsed by Asociación Española de Normalización in January of... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (Endorsed by Asociación Española de Normalización... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners (Endorsed by Asociación Española de Normalización in July... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (Endorsed by AENOR in November of 2016.)... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (Endorsed by Asociación Española de Normalización in August... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-12: Particular requirements for transportable threading machines (Endorsed by Asociación Española de Normalización in August... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (Endorsed by Asociación Española de Normalización in August of... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (Endorsed by Asociación Española de Normalización in January... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (Endorsed by Asociación Española de Normalización in July... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) (Endorsed by AENOR in December... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) (Endorsed by AENOR in January... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) (Endorsed by Asociación Española de... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by AENOR in August of 2016.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by Asociación Española de Normalización in April... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by Asociación Española de Normalización in January... | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by Asociación Española de Normalización in March... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (Endorsed by Asociación Española de... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by AENOR in May of 2016.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by AENOR in November of 2016.) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by Asociación Española de Normalización in January... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws (Endorsed by Asociación Española de Normalización in April of... | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (Endorsed by Asociación Española de Normalización in August of... | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment (Endorsed by AENOR in October... | |
| Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements | |
| Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter | |
| Electrolyte and water for vented Lead Acid accumulators - Part 1: Requirements for electrolyte (Endorsed by AENOR in July of 2016.) | |
| Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Electrolyte and water for vented Lead Acid accumulators - Part 2: Requirements for water (Endorsed by AENOR in July of 2016.) | |
| Electronic railway equipment - On board driving data recording system - Part 1: System specification | |
| Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing | |
| Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2: Role class libraries (Endorsed by AENOR in June of 2015.) | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 3: Geometry and kinematics (Endorsed by Asociación Española de Normalización in June of... | |
| Environmental standardization for electrical and electronic products and systems - Glossary of terms (Endorsed by AENOR in October of 2013.) | |
| Event video data recorder for road vehicle accidents - Part 1: Basic requirements (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.) | |
| Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication (Endorsed by AENOR in April of 2012.) | |
| Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication (Endorsed by AENOR in July of 2016.) | |
| Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication (Endorsed by AENOR in October of 2014.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre (Endorsed by AENOR... | |
| Fibre optics - Launch condition requirements for measuring multimode attenuation (Endorsed by AENOR in February of 2011.) | |
| Field Device Integration (FDI) - Part 101-1: Profiles – Foundation Fieldbus H1 (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS | |
| Field Device Integration (FDI) - Part 103-4: Profiles - PROFINET (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 109-1: Profiles - HART® and WirelessHART® (Endorsed by AENOR in August of 2015.) | |
| Field device integration (FDI) - Part 1: Overview (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 2: FDI Client (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 4: FDI Packages (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 5: FDI Information Model (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 6: FDI Technology Mapping (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration (FDI) - Part 7: FDI Communication Devices (Endorsed by AENOR in August of 2015.) | |
| Field Device Integration - Part 3: FDI Server (Endorsed by AENOR in August of 2015.) | |
| File allocation system with minimized reallocation for multimedia home server (TA 8) (Endorsed by AENOR in February of 2016.) | |
| Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose. | |
| Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose | |
| Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose. | |
| Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose | |
| Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose | |
| FIXED FIREFIGHTING SYSTEMS. HOSE SYSTEMS. PART 1: HOSE REELS WITH SEMI-RIGID HOSE. | |
| FIXED FIREFIGHTING SYSTEMS. HOSE SYSTEMS. PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE. | |
| FIXED FIREFIGHTING SYSTEMS. HOSE SYSTEMS. PART 3: MAINTENANCE OF HOSE REELS WITH SEMI-RIGID HOSE AND HOSE SYSTEMS WITH LAY-FLAT HOSE. | |
| Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears (Endorsed by AENOR in January of 2015.) | |
| Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment | |
| Fluorescent induction lamps - Performance specification (Endorsed by AENOR in June of 2012.) | |
| Fluorescent induction lamps - Safety specifications | |
| Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW | |
| Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW | |
| General requirements for arc fault detection devices | |
| Generic specification of information on products by properties - Part 1: Principles and method (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| GLASS IN BUILDING. DETERMINATION OF THERMAL TRANSMITTANCE (U VALUE). CALCULATION METHOD. | |
| Guidance on software aspects of dependability (Endorsed by AENOR in November of 2012.) | |
| Guidance on software aspects of dependability | |
| Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) (Endorsed by AENOR in July of 2014.) | |
| GX16t-5 capped tubular LED lamp - Safety specifications (Endorsed by Asociación Española de Normalización in August of 2017.) | |
| High Definiton (HD) recording link guidelines (Endorsed by AENOR in April of 2010.) | |
| High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment (Endorsed by AENOR in February of 2013.) | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume | |
| Household refrigerating appliances - Characteristics and test methods | |
| Identification and communication interoperability method for external power supplies used with portable computing devices (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) | |
| In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPDs) | |
| Industrial communication networks - Wireless communication network and communication profiles - WirelessHART™ (Endorsed by AENOR in October of 2016.) | |
| Industrial communication networks - Wireless communication network and communication profiles - WirelessHART™ (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Industrial communication networks - Wireless communication network and communication profiles - WirelessHART™ | |
| Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Industrial communication networks - Wireless communication networks - Part 2: Coexistence management (Endorsed by AENOR in July of 2015.) | |
| Industrial communication networks - Wireless communication networks - Part 2: Coexistence management (Endorsed by Asociación Española de Normalización in August of 2017.) | |
| Industrial communication networks - Wireless communication networks - Part 2: Coexistence management (Endorsed by Asociación Española de Normalización in December of 2019.) | |
| Industrial electroheating equipment - Test methods for infrared emitters (Endorsed by AENOR in November of 2014.) | |
| Industrial electroheating installations - Test methods for infrared electroheating installations (Endorsed by AENOR in October of 2013.) | |
| Industrial networks - Wireless communication network and communication profiles - ISA 100.11a (Endorsed by AENOR in March of 2015.) | |
| Industrial networks - Wireless communication network and communication profiles - ISA 100.11a (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Industrial networks - Wireless communication network and communication profiles - WIA-FA (Endorsed by Asociación Española de Normalización in January of 2018.) | |
| Industrial networks - Wireless communication network and communication profiles - WIA-FA (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Industrial networks - Wireless communication network and communication profiles - WIA-PA (Endorsed by AENOR in May of 2016.) | |
| Industrial networks - Wireless communication network and communication profiles - WIA-PA (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil | |
| Interface for loudspeakers with digital input signals based on IEC 60958 (Endorsed by AENOR in July of 2011.) | |
| Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones | |
| Junction boxes for photovoltaic modules - Safety requirements and tests | |
| LCD backlight unit - Part 1-1: Generic specification (Endorsed by AENOR in August of 2013.) | |
| LCD backlight unit - Part 1-2: Terminology and letter symbols | |
| LCD backlight unit - Part 2: Electro-optical measurement methods of LED backlight unit (Endorsed by AENOR in March of 2013.) | |
| LED modules for general lighting - Performance requirements (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| LED modules for general lighting - Performance requirements (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| LED-binning - Part 1: General requirements and white colour grid intended for automotive applications | |
| LED-binning - Part 1: General requirements and white colour grid | |
| LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications | |
| Lightning density based on lightning location systems (LLS) - General principles (Endorsed by AENOR in January of 2016.) | |
| Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components | |
| Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes | |
| Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) | |
| Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps | |
| Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners | |
| Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) | |
| Lightning Protection System Components (LPSC) - Part 7: Requirements for earthing enhancing compounds | |
| Lightning Protection System Components (LPSC) -- Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| LIST OF EUROPEAN STANDARD QUALITIES OF WASTE PAPER. | |
| Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics (Endorsed by AENOR in April of 2015.) | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange | |
| Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work | |
| Luminaire performance - Part 1: General Requirements | |
| Luminaire performance - Part 2-1: Particular requirements for LED luminaires | |
| Management of alarms systems for the process industries (Endorsed by AENOR in March of 2015.) | |
| Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) - Performance requirements, methods of testing and required test results (Endorsed by AENOR in August of... | |
| Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) - Operational and performance requirements, methods of testing and required test results (Endorsed by Asociación Española de Normalización... | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification and tracking (LRIT) - Performance requirements (Endorsed by AENOR in November of 2012.) | |
| Materials and articles in contact with foodstuffs - Catering containers - Part 1: Dimensions of containers | |
| Materials and articles in contact with foodstuffs - Catering containers - Part 2: Dimensions of accessories and supports (Endorsed by AENOR in November of 1999.) | |
| MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS. CATERING CONTAINERS. PART 2: DIMENSIONS OF ACCESORIES AND SUPPORTS. (Endorsed by AENOR in June of 1995.) | |
| Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) Systems (Endorsed by Asociación Española de Normalización in January of... | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength... | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions | |
| Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method (Endorsed by Asociación Española de Normalización in January of 2018.) | |
| Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets... | |
| Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers... | |
| Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods (Endorsed by AENOR in July of 2016.) | |
| Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Medical electrical equipment - Medical image display systems -- Part 1: Evaluation methods (Endorsed by AENOR in June of 2010.) | |
| Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Methodology for communication network dependability assessment and assurance (Endorsed by AENOR in January of 2014.) | |
| Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmission network (Endorsed by AENOR in March of 2013.) | |
| Methods of measuring performances of electric hair clippers or trimmers for household use | |
| MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements | |
| Multimedia home network configuration - Basic Reference model - Part 1: System model (Endorsed by AENOR in July of 2014.) | |
| Multimedia home server systems - Rights information interoperability for IPTV (Endorsed by AENOR in June of 2013.) | |
| Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture map for auditory presentation of printed texts (Endorsed by AENOR in August of 2015.) | |
| Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Texture map for auditory presentation of printed texts (Endorsed by AENOR in November of 2012.) | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries (Endorsed by AENOR in November of 2011.) | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditory presentation of printed texts (Endorsed by AENOR in April of 2016.) | |
| Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (Endorsed by AENOR in December of 2014.) | |
| Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (Endorsed by AENOR in October of 2013.) | |
| Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions (Endorsed by AENOR in October of 2014.) | |
| Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices (Endorsed by AENOR in October of 2016.) | |
| Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices (Endorsed by Asociación Española de Normalización in August of 2019.) | |
| Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters (Endorsed by Asociación Española de Normalización in... | |
| OPC unified architecture - Part 100: Device Interface (Endorsed by AENOR in June of 2015.) | |
| OPC unified architecture - Part 10: Programs (Endorsed by AENOR in November of 2012.) | |
| OPC unified architecture - Part 10: Programs | |
| OPC unified architecture - Part 11: Historical Access (Endorsed by AENOR in June of 2015.) | |
| OPC unified architecture - Part 13: Aggregates (Endorsed by AENOR in June of 2015.) | |
| OPC unified architecture - Part 3: Address Space Model (Endorsed by AENOR in July of 2015.) | |
| OPC unified architecture - Part 3: Address Space Model | |
| OPC unified architecture - Part 4: Services (Endorsed by AENOR in July of 2015.) | |
| OPC unified architecture - Part 4: Services (Endorsed by AENOR in March of 2012.) | |
| OPC unified architecture - Part 5: Information Model (Endorsed by AENOR in July of 2015.) | |
| OPC unified architecture - Part 5: Information model (Endorsed by AENOR in March of 2012.) | |
| OPC unified architecture - Part 6: Mappings (Endorsed by AENOR in July of 2015.) | |
| OPC unified architecture - Part 6: Mappings (Endorsed by AENOR in March of 2012.) | |
| OPC unified architecture - Part 7: Profiles (Endorsed by AENOR in June of 2015.) | |
| OPC unified architecture - Part 7: Profiles (Endorsed by AENOR in November of 2012.) | |
| OPC unified architecture - Part 8: Data Access (Endorsed by AENOR in June of 2015.) | |
| OPC unified architecture - Part 8: Data Access (Endorsed by AENOR in March of 2012.) | |
| OPC unified architecture - Part 9: Alarms and conditions (Endorsed by AENOR in June of 2015.) | |
| OPC unified architecture - Part 9: Alarms and conditions (Endorsed by AENOR in November of 2012.) | |
| Organic light emitting diode (OLED) panels for general lighting - Performance requirements (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| Organic light emitting diode (OLED) panels for general lighting - Performance Requirements (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Organic light emitting diode (OLED) panels for general lighting - Safety requirements | |
| Overhead lines - Methods for testing self-damping characteristics of conductors (Endorsed by AENOR in March of 2014.) | |
| Paper and board - European list of standard grades of paper and board for recycling | |
| Paper and board - European list of standard grades of recovered paper and board. | |
| Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board. | |
| Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board | |
| Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board | |
| Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract | |
| Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract | |
| Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract. | |
| PAPER AND BOARD INTENDED TO COMO INTO CONTACT WITH FOODSTUFFS. DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD. | |
| PAPER AND BOARD INTENDED TO COMO INTO CONTACT WITH FOODSTUFFS. DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD. | |
| PAPER. UNTRIMMED SIZES. PRIMARY RANGE AND SUPPLEMENTARY RANGE DESIGNATION AND TOLERANCES. EXPRESSION OF DIRECTION OF MANUFACTURE. | |
| Particular safety requirements for equipment to be connected to information and communication networks (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Performance evaluation methods of mobile household robots | |
| Photovoltaic (PV) modules - Ammonia corrosion testing | |
| Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating (Endorsed by Asociación Española de Normalización in September of 2017.) | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating | |
| Photovoltaic module - Bypass diode - Thermal runaway test (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment | |
| Photovoltaic systems - Design qualification of solar trackers | |
| PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF TENSILE PROPERTIES. | |
| Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method | |
| Plywood - Classification by surface appearance - Part 1: General | |
| Plywood - Classification by surface appearance - Part 2: Hardwood | |
| Plywood - Classification by surface appearance - Part 3: Softwood | |
| Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects | |
| Plywood - Specifications | |
| PLYWOOD. SPECIFICATIONS. PART 1: REQUIREMENTS FOR PLYWOOD FOR USE IN DRY CONDITIONS. | |
| PLYWOOD. SPECIFICATIONS. PART 2: REQUIREMENTS FOR PLYWOOD FOR USE IN HUMID CONDITIONS. | |
| PLYWOOD. SPECIFICATIONS. PART 3: REQUIREMENTS FOR PLYWOOD FOR USE IN EXTERIOR CONDITIONS. | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (Endorsed by AENOR in December of 2014.) | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (Endorsed by Asociación Española de Normalización in June of 2022.) | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (Endorsed by AENOR in December of 2014.) | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (Endorsed by Asociación Española de Normalización in December of 2019.)... | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (Endorsed by Asociación Española de Normalización in November of 2023.)... | |
| Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) | |
| Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in December of 2021.) | |
| Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements | |
| Power sources for a wireless communication device - Part 1: General requirements of power modules (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Power sources for a wireless communication device - Part 2: Profile for power modules with batteries (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes | |
| Programmable components in electronic lamp controlgear - General and safety requirements (Endorsed by AENOR in August of 2015.) | |
| Programmable components in electronic lamp controlgear - General and safety requirements (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Protective gloves for firefighters (Endorsed by AENOR in September of 2008.) | |
| PROTECTIVE GLOVES FOR FIREFIGHTERS. | |
| Protective gloves for firefighters | |
| Quality Evaluation Method for the Sound Field of Directional Loudspeaker Array System (Endorsed by AENOR in July of 2016.) | |
| Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material (Endorsed by AENOR in December of 2016.) | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material (Endorsed by AENOR in January of 2016.) | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material (Endorsed by AENOR in April of 2016.) | |
| Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material (Endorsed by AENOR in December of 2016.) | |
| Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (Endorsed by AENOR in December of 2011.) | |
| Radio data system (RDS) - Receiver products and characteristics - Methods of Measurement (Endorsed by AENOR in June of 2015.) | |
| Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification (Endorsed by AENOR in April of 2016.) | |
| Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 2: Guidelines for the use (Endorsed by AENOR in November of 2012.) | |
| Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems | |
| Railway applications - Fixed installations - Stationary energy storage system for DC traction systems | |
| Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system | |
| Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings | |
| Reinforced concrete pressure pipes, cylinder type, including joints and fittings | |
| Representation of states of objects by graphical symbols (Endorsed by AENOR in February of 2015.) | |
| Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses | |
| Resilient floor coverings - Determination of conventional pattern depth | |
| Resilient floor coverings - Determination of curling exposure to moisture | |
| Resilient floor coverings - Determination of exudation of plasticizers | |
| Resilient floor coverings - Determination of gelling | |
| Resilient floor coverings - Determination of the spreading of water | |
| Resilient floor coverings - Determination of volatile loss | |
| Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test | |
| Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test | |
| Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification | |
| Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification | |
| Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification | |
| Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification | |
| Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification | |
| Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification | |
| Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification | |
| Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF APPARENT DENSITY OF AGGLOMERATED CORK. | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF DIMENSIONAL STABILITY OF LINOLEUM TILES CAUSED BY CHANGES IN ATMOSPHERIC HUMIDITY. | |
| RESILIENT FLOOR COVERINGS. EXPANDED (CUSHIONED) POLYVINYL CHLORIDE FLOOR COVERINGS. SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. HOMOGENEOUS AND HETEROGENEOUS POLYVINYL CHLORIDE FLOOR COVERINGS. SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. IDENTIFICATION OF LINOLEUM AND DETERMINATION OF CEMENT CONTENT AND ASH RESIDUE. | |
| RESILIENT FLOOR COVERINGS. POLYVINYL CHLORIDE FLOOR COVERINGS ON JUTE BACKING OR ON POLYESTER FELT BACKING OR ON POLYESTER FELT WITH POLYVINYL CHLORIDE BACKING. SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. POLYVINYL CHLORIDE FLOOR COVERINGS WITH CORK-BASED BACKING. SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. POLYVINYL CHLORIDE FLOOR COVERINGS WITH FOAM LAYER. SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. SEMI-FLEXIBLE POLYVINYL CHLORIDE TILES. SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. TILES OF AGGLOMERATED COMPOSITION CORK WITH POLYVINYL CHLORIDE WEAR LAYER. SPECIFICATION. | |
| Root cause analysis (RCA) | |
| Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures | |
| Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers | |
| Safety of machinery - Requirements for cableless control systems of machinery (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Safety of machinery - Requirements for cableless control systems of machinery (Endorsed by Asociación Española de Normalización in July of 2020.) | |
| SAFETY OF MACHINERY. REDUCTION OF RISK TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY. PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES. | |
| SAFETY OF MACHINERY. REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY. PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS. | |
| Sample preparation for measurement of mercury level in fluorescent lamps (Endorsed by AENOR in February of 2012.) | |
| Sample preparation for measurement of mercury level in fluorescent lamps and low-pressure mercury UV radiation sources (Endorsed by Asociación Española de Normalización in May of 2025.) | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications (Endorsed by Asociación Española de Normalización... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells (Endorsed by AENOR in December of 2014.) | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications (Endorsed by AENOR in February of 2015.) | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications (Endorsed by Asociación Española de Normalización in August of... | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 2: Thermo power based thermoelectric energy harvesting (Endorsed by Asociación Española de Normalización in May of 2017.) | |
| Semiconductor devices - Semiconductor interface for human body communication - Part 1: General requirements (Endorsed by AENOR in July of 2016.) | |
| Semiconductor devices - Semiconductor interface for human body communication - Part 2: Characterization of interfacing performances (Endorsed by AENOR in July of 2016.) | |
| Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its operational conditions (Endorsed by AENOR in July of 2016.) | |
| Spare parts provisioning (Endorsed by Asociación Española de Normalización in August of 2017.) | |
| Specification for data logging and monitoring of lifts, escalators and passenger conveyors | |
| Standard practice for marking medical devices and other items for safety in the magnetic resonance environment (Endorsed by AENOR in July of 2015.) | |
| Standardized product ontology register and transfer by spreadsheets - Part 1: Logical structure for data parcels (Endorsed by AENOR in February of 2015.) | |
| Standardized product ontology register and transfer by spreadsheets - Part 3: Interface for Common Information Model (Endorsed by AENOR in June of 2015.) | |
| Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification (Endorsed by AENOR in October of 2015.) | |
| Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use (Endorsed by AENOR in April of 2012.) | |
| Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance | |
| Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance | |
| Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems (Endorsed by AENOR in June of 2015.) | |
| Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems (Endorsed by AENOR in November of 2014.) | |
| Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing (Endorsed by AENOR in October... | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing (Endorsed by AENOR in November... | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (Endorsed by Asociación Española de Normalización in May... | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) | |
| Text-to-speech for television - General requirements (Endorsed by AENOR in June of 2013.) | |
| THERMAL SPRAYING. TERMINOLOGY, CLASSIFICATION. | |
| Thermal spraying. Terminology, classification | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing (Endorsed by AENOR in January of 2016.) | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems - Measurement method (Endorsed by AENOR in November of 2016.) | |
| TRANSPORTABLE GAS CYLINDERS. 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS. PART 1: SPECIFICATION. | |
| TRANSPORTABLE GAS CYLINDERS. 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS. PART 2: GAUGE INSPECTION. | |
| Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems (Endorsed by AENOR in June of 2014.) | |
| Universal Serial Bus interfaces for data and power - Part 1-1: Universal Serial Bus interfaces - Common components - USB Battery Charging Specification, Revision 1.2 (TA 14) (Endorsed by AENOR... | |
| Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Universal Serial Bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery Specification (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (Endorsed by Asociación Española de Normalización in February of 2018.)... | |
| Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-C™ cable and connector specification | |
| Universal serial bus interfaces for data and power - Part 1: Universal serial bus specification, revision 2.0 (Endorsed by AENOR in February of 2014.) | |
| Universal Serial Bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14) (Endorsed by AENOR in February of 2016.) | |
| Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) (Endorsed by AENOR in February of... | |
| Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14) (Endorsed by AENOR in February of 2016.)... | |
| Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 (Endorsed by AENOR in February of 2014.) | |
| Universal Serial Bus interfaces for data and power - Part 3-1: Universal Serial Bus 3.1 Specification (Endorsed by Asociación Española de Normalización in August of 2017.) | |
| Universal serial bus interfaces for data and power - Part 3: USB battery charging specification, Revision 1.2 (Endorsed by AENOR in November of 2013.) | |
| Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (Endorsed by AENOR in June of 2014.) | |
| Use case methodology - Part 2: Definition of the template for use cases, actor list and requirements list (Endorsed by AENOR in October of 2015.) | |
| Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts - Particular requirements | |
| Video surveillance systems for use in security applications - Part 1-1: System requirements - General (Endorsed by AENOR in April of 2014.) | |
| Video surveillance systems for use in security applications - Part 1-1: System requirements - General (Endorsed by AENOR in August of 2014.) | |
| Video surveillance systems for use in security applications - Part 1-1: System requirements - General | |
| Video surveillance systems for use in security applications - Part 1-2: System requirements – Performance requirements for video transmission (Endorsed by AENOR in April of 2014.) | |
| Video surveillance systems for use in security applications - Part 1-2: System requirements – Performance requirements for video transmission (Endorsed by AENOR in June of 2015.) | |
| Video surveillance systems for use in security applications - Part 2-1: Video transmission protocols - General requirements (Endorsed by AENOR in March of 2014.) | |
| Video surveillance systems for use in security applications - Part 2-2: Video transmission protocols - IP interoperability implementation based on HTTP and REST services (Endorsed by AENOR in March of... | |
| Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperability implementation based on Web services (Endorsed by AENOR in March of 2014.) | |
| Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces (Endorsed by AENOR in March of 2015.) | |
| Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Video surveillance systems for use in security applications - Part 4: Application guidelines (Endorsed by AENOR in May of 2015.) | |
| Visible light beacon system for multimedia applications (Endorsed by Asociación Española de Normalización in August of 2017.) | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing (Endorsed by Asociación Española de Normalización in July of 2023.) | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing (Endorsed by Asociación Española de Normalización in March of 2018.) | |
| Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS) (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Wireless Power Transfer - Management - Part 1: Common Components (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Wireless power transfer - Management - Part 2: Multiple device control management (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Wireless power transfer - Management - Part 3: Multiple source control management (Endorsed by Asociación Española de Normalización in May of 2017.) |
| << Prev | Next >> |