AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A GUIDE TO THE APPLICATION OF TBR 21. | |
| Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process. | |
| Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature (Endorsed by AENOR in January of... | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content (Endorsed by AENOR in November of 2002.) | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area (Endorsed by AENOR in November of 2002.) | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature (Endorsed by AENOR in July of... | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within... | |
| Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments... | |
| Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density (Endorsed by AENOR in November of 2002.) | |
| Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties (Endorsed by AENOR in September of 2009.) | |
| Air quality - Approach to uncertainty estimation for ambient air reference measurement methods | |
| Alarm systems - Alarm transmission systems and equipment - Part 10: Requirements for remote access (Endorsed by Asociación Española de Normalización in June of 2022.) | |
| Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines | |
| Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Internet Protocol (IP) (Endorsed by Asociación Española de Normalización in... | |
| Alarm systems - Alarm transmission systems and equipment -- Part 4: Annunciation equipment used in alarm receiving centres | |
| Alarm systems - Combined and integrated alarm systems - General requirements | |
| Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic) (Endorsed by AENOR in March of 2014.) | |
| Alarm systems - Intrusion and hold-up systems - Part 5-4: System compatibility testing for I&HAS equipments located in supervised premises | |
| Alarm systems - Intrusion and hold-up systems - Part 9: Alarm verification - Methods and principles | |
| Alarm systems - Intrusion systems - Part 5-1: Interconnections - Requirements for wired Interconnection for I&HAS equipments located in supervised premises (Endorsed by Asociación Española de Normalización in April of... | |
| Alarm systems - Intrusion systems -- Part 2-2: Requirements for passive infrared detectors | |
| Alarm systems - Intrusion systems -- Part 2-3: Requirements for microwave detectors | |
| Alarm systems - Intrusion systems -- Part 2-4: Requirements for combined passive infrared and microwave detectors | |
| Alarm systems - Intrusion systems -- Part 2-5: Requirements for combined passive infrared and ultrasonic detectors | |
| Alarm systems - Intrusion systems -- Part 2-6: Requirements for opening contacts (magnetic) | |
| Alarm systems - Intrusion systems -- Part 3: Control and indicating equipment | |
| Alarm systems - Intrusion systems -- Part 7: Application guidelines | |
| Alarm systems - Social alarm systems - Part 7: Application guidelines | |
| Application of EMF standards to combined products (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide | |
| Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide | |
| Assignment of safety integrity requirements - Basic rationale (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| BASIC SPECIFICATION: CECC ASSESSED PROCESS AVERAGE PROCEDURE (60% CONFIDENCE LIMIT). (Endorsed by AENOR in November of 1997.) | |
| BASIC SPECIFICATION: X-RAY INSPECTION OF ELECTRONIC COMPONENTS. (Endorsed by AENOR in January of 1996.) | |
| Biosafety professional competence | |
| Biotechnology - Laboratories for research, development and analysis - Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard | |
| Biotechnology - Microorganisms - Report on the criteria used to classify Group I genetically modified microorganisms | |
| BS: PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES. PART 1: GENERAL REQUIREMENTS. (Endorsed by AENOR in December of 1996.) | |
| BS:PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES. PART 2: REQUIREMENTS FOR LOW HUMIDITY CONDITIONS. (Endorsed by AENOR in September of 1996.) | |
| BS:PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES. PART 3: REQUIREMENTS FOR CLEAN ROOM AREAS. (Endorsed by AENOR in September of 1996.) | |
| BS:PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES. PART 4: REQUIREMENTS FOR HIGH-VOLTAGE ENVIRONMENTS. (Endorsed by AENOR in September of 1996.) | |
| Cable management systems (CMS) providing support for cables with intrinsic fire resistance (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Cable management systems (CMS) providing support for cables with intrinsic fire resistance (Endorsed by Asociación Española de Normalización in November of 2022.) | |
| Cable management systems - Design-for-recycling guidelines for PVC cable management products (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Cable networks for television signals, sound signals and interactive services - Part 2-1: Electromagnetic compatibility measurements (Endorsed by AENOR in November of 2014.) | |
| Cable networks for television signals, sound signals and interactive services - Part 2-2: Interference issues for DVB-T reception in the presence of LTE base station signals (Endorsed by AENOR in... | |
| Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for cable networks - Methods of measurement of the maximum operating output level in... | |
| Case hardening steels - Technical delivery conditions | |
| CASE HARDENING STEELS. TECHNICAL DELIVERY CONDITIONS. | |
| CECC QUALITY ASSESSMENT PROCEDURE FOR ELECTRONIC COMPONENTS. PART 6: TECHNOLOGY APPROVAL OF MANUFACTURERS (Endorsed by AENOR in June of 1999.) | |
| Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method | |
| Chemicals used for treatment of water intended for human consumption - Guidelines for the purchase | |
| City Resilience Development - Guide to combine disaster risk management and climate change adaptation - Historic areas | |
| Clothes washing machines and washer-dryers for household and similar use - Method for the determination of rinsing effectiveness by measurement of the surfactant content at textile materials | |
| Clothes washing machines and washer-dryers for household and similar use - Method for the determination of temperature inside the laundry load | |
| Coaxial cables used in cabled distribution networks - Part 8: Repair and substitute of damaged buried cables (Endorsed by AENOR in April of 2013.) | |
| COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE. | |
| Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions | |
| Cold rolled narrow steel strip - Tolerances on dimensions and shape | |
| Cold rolled narrow steel strip for heat treatment - Technical delivery conditions | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 1: GENERAL. | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 2: CASE HARDENING STEELS. | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 3: STEELS FOR QUENCHING AND TEMPERING. | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 4: SPRING STEELS AND OTHER APPLICATIONS. | |
| COLD ROLLED NARROW STEEL STRIP. TOLERANCES ON DIMENSIONS AND SHAPE. | |
| COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE. | |
| Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state | |
| Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state | |
| Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape | |
| Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions | |
| Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions | |
| COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING. TECHNICAL DELIVERY CONDITIONS | |
| Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays (Endorsed by Asociación Española de Normalización in November of... | |
| Collection, logistics & treatment requirements for WEEE - Part 3-4: Specification for de-pollution - temperature exchange equipment (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals (Endorsed by Asociación Española de Normalización in... | |
| Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614 | |
| Community face coverings - Guide to minimum requirements, methods of testing and use | |
| Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors | |
| Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps | |
| Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors (Endorsed by AENOR in January of 2014.) | |
| COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 1: COMPRESSORS. | |
| COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 2: VACUUM PUMPS. | |
| Conductors for overhead lines - Fiber reinforced composite core used as supporting member material - Part 1: Polymeric matrix composite cores (Endorsed by Asociación Española de Normalización in March of... | |
| Conductors for overhead lines - Fiber reinforced composite core used as supporting member material - Part 2: Metallic matrix composite cores (Endorsed by Asociación Española de Normalización in March of... | |
| Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions | |
| CONTINUOUSLY HOT-ROLLED LOW CARBON STELL SHEET AND STRIP FOR COLD FORMING. TECHNICAL DELIVERY CONDITIONS. | |
| Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape | |
| CONTINUOUSLY HOT-ROLLED UNCOATED PLATE, SHEET AND STRIP OF NON-ALLOY AND ALLOY STEELS. TOLERANCES ON DIMENSIONS AND SHAPE. | |
| Copper and copper alloys. Compendium of compositions and products. | |
| DEFINITION AND CLASSIFICATION OF GRADES OF STEEL. | |
| Definition of steel products | |
| DEFINITIONOF STEEL PRODUCTS. | |
| Definitions related to material efficiency (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| DESIGNATION SYSTEM FOR STEEL. ADDITIONAL SYMBOLS FOR STEEL NAMES. | |
| DESIGNATION SYSTEMS FOR STEEL. PART 1: STEEL NAMES, PRINCIPAL SYMBOLS. | |
| DESIGNATION SYSTEMS FOR STEEL. PART 2: NUMERICAL SYSTEM. | |
| Designation systems for steels - Part 1: Steel names | |
| Designation systems for steels - Part 2: Numerical system | |
| Determination of emissions from appliances burning gaseous fuels during type-testing | |
| Durability of wood and wood based products - Terminology - Part 2: Vocabulary (Endorsed by AENOR in August of 2006.) | |
| Durability of wood and wood based products - Terminology - Part 2: Vocabulary | |
| Durability of wood and wood-based products - Terminology - Part 1: List of equivalent terms | |
| Electric cables - Extended application of test results for reaction to fire | |
| Electric cables - Extended application of test results | |
| Electric vehicle conductive charging system - Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation - Particular requirements for portable and mobile equipment (Endorsed by... | |
| Electric vehicles conductive charging system - Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation - General rules and requirements for stationary equipment (Endorsed by... | |
| Electric vehicles conductive charging system - Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication (Endorsed by... | |
| Electric vehicles conductive charging system - Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects (Endorsed by... | |
| Electric vehicles conductive charging system - Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication (Endorsed by Asociación Española de... | |
| Electric vehicles conductive charging system - Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication (Endorsed by Asociación Española de Normalización... | |
| Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc | |
| Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz (Endorsed by AENOR in November of... | |
| Electromagnetic characteristics of linear cable management systems (CMS) (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Electromagnetic characteristics of linear cable management systems (CMS) (Endorsed by Asociación Española de Normalización in May of 2017.) | |
| Electromagnetic Compatibility (EMC) Standardization for Product Committees concerned with apparatus | |
| Electrostatics - Code of practice for the avoidance of hazards due to static electricity (Endorsed by AENOR in March of 2013.) | |
| Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide | |
| Environmental technology verification - Air emission abatement technologies | |
| Ethics assessment for research and innovation - Part 1: Ethics committee | |
| Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework | |
| EUROPEAN SCHEME FOR THE CLASSIFICATION OF GAS APPLIANCES ACCORDING TO THE METHOD OF EVACUATION OF THE PRODUCTS OF COMBUSTION (TYPES). | |
| Evaluation of electromagnetic fields around power transformers | |
| Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance (Endorsed by AENOR in June of 2015.) | |
| Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance (Endorsed by Asociación Española de Normalización in March of 2019.) | |
| Explosive atmospheres - Part 33: Equipment protection by special protection 's' (Endorsed by AENOR in June of 2015.) | |
| Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Explosive atmospheres - Part 43: Equipment in adverse service conditions (Endorsed by Asociación Española de Normalización in March of 2022.) | |
| Explosive atmospheres - Part 47: Equipment protection by 2-Wire Intrinsically Safe Ethernet concept (2-WISE) (Endorsed by Asociación Española de Normalización in March of 2022.) | |
| External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s) (Endorsed by Asociación Española de Normalización in February of 2017.) | |
| Fertilizers - Crushing strength determination on fertilizers grains | |
| Fertilizers - Denominations and specifications | |
| Fertilizers - Determination of dust content. | |
| Fixed Installations for Railway Applications - Requirements for the validation of simulation tools used for the design of electric traction power supply systems - Part 2: specific DC urban case... | |
| FLAT PRODUCTS MADE OF STEEL FOR PRESSURE PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| FLAT PRODUCTS MADE OF STEEL FOR PRESSURE PURPOSES. PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES. | |
| FLAT PRODUCTS MADE OF STEEL FOR PRESSURE PURPOSES. PART 3: WELDABLE, FINE-GRAIN STEELS, NORMALIZED. | |
| Flat products made of steels for pressure purposes - Part 1: General requirements | |
| Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties | |
| Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized | |
| Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties | |
| Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled | |
| Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered | |
| Flat products made of steels for pressure purposes - Part 7: Stainless steels | |
| FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES. PART 1: GENERAL REQUIREMENTS. | |
| FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES. PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES. | |
| FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES. PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED. | |
| FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES. PART 6: WELDABLE FINE GRAINS STEELS, QUENCHED AND TEMPERED. | |
| FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES. PART 7: STAINLESS STEELS. | |
| Food analysis - Biotoxins - Criteria of analytical methods of mycotoxins | |
| Framework for consumer rental conditions. | |
| Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods | |
| FREE-CUTTING STEELS. TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS | |
| Functional safety - safety instrumented systems for the process industry sector - Part 0: Functional safety for the process industry and IEC 61511 (Endorsed by Asociación Española de Normalización in... | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2 (Endorsed by... | |
| General guidance for the marking of gas appliances | |
| General guidance on the equipment used for inhaled nitric oxide therapy. | |
| General guideline on real drive test methodology for compiling comparable emission data (Endorsed by Asociación Española de Normalización in June of 2019.) | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-3: HBES installations - Assessment and definition of levels | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 7: IT security and data protection - User Guide (Endorsed by Asociación... | |
| General technical delivery conditions for steel products | |
| GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL AND IRON PRODUCTS. | |
| GEOGRAPHIC INFORMATION. OVERVIEW | |
| Geographic information. Vocabulary. | |
| Geometrical product specification (GPS). Masterplan. (ISO/TR 14638:1995) | |
| GRAIN-ORIENTED ELECTRICAL STEEL ANS STRIP DELIVERED IN THE FULLY PROCESSED STATE. | |
| Grain-oriented electrical steel sheet and strip delivered in the fully processed state (Endorsed by AENOR in September of 2006.) | |
| Grain-oriented electrical steel sheet and strip delivered in the fully processed state | |
| Grain-oriented electrical steel strip and sheet delivered in the fully processed state | |
| Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials | |
| GUIDANCE ON THE CLASSIFICATION OF DENTAL DEVICES AND ACCESSORIES. | |
| Guide for in situ measurements - In situ measurement of disturbance emission | |
| GUIDE TO SELECTION, USE AND MAINTENANCE OF OCCUPATIONAL EYE AND FACE PROTECTORS | |
| Guide to the drafting and use of harmonized and non-harmonized EMC standards (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| GUIDELINES FOR SELECTION AND USE OF RESPIRATORY PROTECTIVE DEVICES. | |
| Guidelines for the use of EN 45545-2 for Ni-Cd batteries on board rolling stock (Endorsed by Asociación Española de Normalización in July of 2025.) | |
| Guidelines for the use of EN 45545-2 for Ni-Cd batteries on board rolling stock (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Guidelines for the verification of household appliances under energy labelling and eco design | |
| GUIDELINES ON DURABILITY OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. (ISO/TR 13434:1998). | |
| Guidelines to standardisers of Collective Transport Systems - Needs of older people and persons with disabilities - Part 1: Basic Guidelines | |
| Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery | |
| Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace | |
| Health Informatics - Safety and Security Related Software Quality Standards for Healthcare (SSQS) | |
| Heat resisting steels and nickel alloys | |
| High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 1: Guideline (Endorsed by Asociación Española de Normalización in... | |
| High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 2: Parameter lists (Endorsed by Asociación Española de Normalización... | |
| High-voltage switchgear and controlgear - Part 314: Direct current disconnectors and earthing switches (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| High-voltage switchgear and controlgear - Part 316: Direct current by-pass switches and paralleling switches (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| High-voltage switchgear and controlgear - Part 318: DC gas-insulated metal-enclosed switchgear for rated voltages including and above 100 kV (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| High-voltage switchgear and controlgear - Part 320: Environmental aspects and life cycle assessment rules for high-voltage switchgear and controlgear (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| High-voltage switchgear and controlgear - Part 5: Common specifications for direct current switchgear and controlgear (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass | |
| Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| HOT ROLLED NARROW STEEL STRIP. TOLERANCES ON DIMENSIONS AND SHAPE. | |
| HOT ROLLED PRODUCTS OF NON-ALLOY STEELS. TECHNICAL DELIVERY CONDITIONS. | |
| Hot rolled products of structural steels - Part 1: General technical delivery conditions | |
| Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels | |
| Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalize d rolled weldable fine grain structural steels | |
| Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels | |
| Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance | |
| Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition | |
| Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions | |
| Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions | |
| Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| HOT ROLLED STEEL EQUAL FLANGE TEES WITH RADIUSED ROOT AND TOES. DIMENSions and tolerances on shape and dimensions. | |
| Hot rolled taper flange I sections - Tolerances on shape and dimensions | |
| HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEEL. PART 2: DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZE D ROLLED STEELS. | |
| HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS. PART 1: GENERAL DELIVERY CONDITIONS. | |
| HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS. PART 3: DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS. | |
| Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape | |
| Hot-rolled steels for quenched and tempered springs - Technical delivery conditions | |
| HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1: Guidelines (Endorsed by Asociación Española de Normalización in July of 2020.) | |
| HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists (Endorsed by Asociación Española de Normalización in July of 2020.)... | |
| Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply". | |
| IMPLEMENTATION OF EN 729 ON QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS | |
| Indicators for the sustainability assessment of roads | |
| Information technology - Cabling installation - Part 99-1: Remote powering (Endorsed by AENOR in May of 2015.) | |
| Information technology - Cabling installation - Part 99-2: Mitigation and protection from electrical interference (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Information technology - Data centre facilities and infrastructures - Part 2-10: Earthquake risk and impact analysis (Endorsed by Asociación Española de Normalización in April of 2021.) | |
| Information technology - Data centre facilities and infrastructures - Part 4-31: Key performance indicators for Resilience (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Information technology - Data centre facilities and infrastructures - Part 5-1: Maturity Model for Energy Management and Environmental Sustainability (Endorsed by Asociación Española de Normalización in February of 2022.) | |
| Information technology - Data centre facilities and infrastructures - Part 5-1: Maturity Model for Energy Management and Environmental Sustainability (Endorsed by Asociación Española de Normalización in October of 2023.) | |
| Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy management (Endorsed by AENOR in June of 2016.) | |
| Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy management (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy management (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Information technology - Data centre facilities and infrastructures - Part 99-2: Recommended practices for environmental sustainability (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Interface control document for provision of EGNOS CS/EDAS based services for tracking and tracing of the transport of goods (Endorsed by AENOR in December of 2014.) | |
| Interoperability framework requirement specification (Endorsed by AENOR in December of 2014.) | |
| Key factors for the successful implementation of urban biowaste selective collection schemes | |
| Laboratory biorisk management - Guidelines for the implementation of CWA 15793:2008 | |
| Laboratory biorisk management standard | |
| Lifting and Load-bearing Equipment for Stages and other Production Areas within the Entertainment Industry - Part 1: General requirements (excluding aluminium and steel trusses and towers) | |
| Lifting and Load-bearing Equipment for Stages and other Production Areas within the Entertainment Industry - Part 2: Specifications for design, manufacture and for use of aluminium and steel trusses and... | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 2: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF GLASS FIBRE REINFORCED POLYESTER RESIN (GRP). | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING. PART 1: GENERAL REQUIREMENTS AND TEST METHODS. | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING. PART 3: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF POLYVINYL CHLORIDE (PVC). | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING.PART 4: SPECIFIC REQUIREMENTS, TEST METHODS AND PERFORMANCE OF POLYCARBONATE (PC) SHEETS. | |
| LIGHT TRANSMITTING PROFILED PLASTIC SHEETNG FOR SINGLE SKIN ROOFING. PART 5: SPECIFIC REQUIREMENTS, TEST METHODS AND PERFORMANCE OF POLYMETHYLMETHACRYLA TE (PMMA) SHEETS. | |
| Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods | |
| Lighting applications - Tunnel lighting | |
| Lightning Protection System Components (LPSC) - Part 1: Testing requirements for metal sheets' joints used in LPS (Endorsed by Asociación Española de Normalización in July of 2021.) | |
| Live working - Flame-resistant materials for clothing for thermal protection of workers - Thermal hazards of an electric arc -- Part 1: Test methods | |
| Logistics Performance Measures - Requirements and Measuring Methods. | |
| Low-voltage surge protective devices - Part 32: Surge protective devices connected to the DC side of photovoltaic installations - Selection and application principles (Endorsed by Asociación Española de Normalización in... | |
| Low-voltage surge protective devices -- Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery | |
| Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery | |
| Material efficiency - Household and similar electrical appliances - Assessment of applicability of EN 4555X (Endorsed by Asociación Española de Normalización in May of 2022.) | |
| Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.) | |
| Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in September of 2006.) | |
| Mechanical vibration - Guide to the health effects of vibration on the human body | |
| Medical device traceability. | |
| Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature. | |
| METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 1: TEST METHOD. | |
| METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES. | |
| METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR BRINELL HARDNESS TESTING MACHINES. | |
| METALLIC MATERIALS. HARDNESS TEST. PART 1: ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T). | |
| METALLIC MATERIALS. HARDNESS TEST. PART 2: VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T). | |
| METALLIC MATERIALS. HARDNESS TEST. PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K , N,... | |
| METALLIC MATERIALS. TENSILE TEST. PART 4: VERIFICATION OF EXTENSOMETERS USED IN UNIAXIAL TESTING. | |
| Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete | |
| Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements (Endorsed by AENOR in August of 2006.) | |
| Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements | |
| Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements | |
| Mobile access and working towers made of prefabricated elements - Part 2: Rules and guidelines for the preparation of an instruction manual | |
| Nitriding steels - Technical delivery conditions. | |
| NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 1: GENERAL REQUIREMENTS. | |
| NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 2: SPECIFIC REQUIREMENTS FOR GENERAL PURPOSES ROD. | |
| NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE LOW CARBON STEEL ROD. | |
| NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 4: SPECIFIC REQUIREMENTS FOR ROD FOR SPECIAL APPLICATIONS. | |
| OPC unified architecture - Part 1: Overview and concepts (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| OPC unified architecture - Part 2: Security Model (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| Packaging - Marking and material identification system. | |
| Packaging - Material recovery - Criteria for a minimum content of recycled material | |
| Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling. | |
| Packaging - Optimization of energy recovery from packaging waste. | |
| Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems | |
| Packaging - Report on criteria and methodologies for life cycle analysis of packaging. | |
| Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 2: Requirements for measuring... | |
| Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment. Part 1: Requirements for measuring and verifying... | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 15: Assessment of bleeding of coloured wood extractives through a coating by means of a water... | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test (Endorsed by... | |
| PERSONAL PROTECTIVE EQUIPMENT. LIFEJACKETS AND BUOYANCY AIDS. GUIDE FOR SELECTION AND USE. | |
| PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS. PART 2: DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS. | |
| PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS. PART 3: DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS. | |
| PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHES AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS. PART 1: GENERAL DELIVERY CONDITIONS. | |
| Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of commissioning, servicing and maintaining gas fired appliances (Endorsed by AENOR... | |
| Proposals for the braking of electrical vehicles | |
| PUBLIC SWITCHED TELEPHONE NETWORK (PSTN). METHOD OF RATING TERMINAL EQUIPMENT SO THAT IT CAN BE CONNECTED IN SERIES AND/OR IN PARALLEL TO A NETWORK TERMINATION POINT (NTP). | |
| QUENCHED AND TEMPERED STEELS. PART 1: TECHNICAL DELIVERY CONDITIONS FOR SPECIAL STEELS. | |
| QUENCHED AND TEMPERED STEELS. PART 2: TECHNICAL DELIVERY CONDITIONS FOR UNALLOYED QUALITY STEELS. | |
| QUENCHED AND TEMPERED STEELS. PART 3: TECHNICAL DELIVERY CONDITIONS FOr boron steels. | |
| Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 1: General principles for the presentation of ERTMS/ETCS/GSM-R information (Endorsed by... | |
| Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Part 2: Ergonomic arrangements of GSM-R information (Endorsed by Asociación Española de Normalización in May... | |
| Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Part 3: Ergonomic arrangements of non ETCS information (Endorsed by Asociación Española de Normalización in... | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits (Endorsed by AENOR in July of 2015.) | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits (Endorsed by AENOR in September of 2016.) | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits (Endorsed by Asociación Española de Normalización in August of 2020.) | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters (Endorsed by AENOR in January of 2014.) | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters (Endorsed by Asociación Española de Normalización in February of 2022.) | |
| Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead contact lines on electrified roads (Endorsed by Asociación Española de Normalización in January of... | |
| Railway Applications - Cybersecurity (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| Railway applications - Cybersecurity (Endorsed by Asociación Española de Normalización in September of 2023.) | |
| Railway applications - Driver's cab train display controller (TDC) - Part 1: General architecture (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Railway applications - Driver's cab Train Display Controller (TDC) - Part 2: Display systems FIS (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 4: AC metal-enclosed traction switchgear (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Railway applications - Fixed installations and rolling stock - Interface requirements between charging infrastructure with dedicated contact line sections and electric traction units with onboard electric traction energy storages and... | |
| Railway applications - Safety measures for the personnel working on or near overhead contact lines | |
| Reasonably Foreseeable Use Conditions when referring to EMF Exposure Assessment (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations (Endorsed by Asociación Española de Normalización in April of 2023.) | |
| Recommendations to preserve and extend sludge utilization and disposal routes | |
| Report on the use of EN 45545-2 and EN 45545-5 for electronic equipment on board rolling stock (Endorsed by Asociación Española de Normalización in July of 2025.) | |
| Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code) (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Round steel rod for cold heading and cold extrusion - Dimensions and tolerances | |
| RULE OF PROCEDURE 14: QUALITY ASSESSEMENT PROCEDURES. PART 6: TECHNOLOGY APPROVAL OF ELECTRONIC COMPONENT MANUFACTURERS (Endorsed by AENOR in November of 1997.) | |
| RULE OF PROCEDURE. QUALITY ASSESSMENT PROCEDURES . PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION (Endorsed by AENOR in December of 1996.) | |
| Rules for the determination of uncertainties in the measurement of the losses on power transformer and reactors | |
| Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) | |
| Safety of machinery - Electro-sensitive protective equipment -- Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) | |
| Safety of machinery - Guidelines on functional safety of safety-related control system (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Safety of machinery - Human physical performance - Part 1: Terms and definitions. | |
| Safety of machinery - Human physical performance - Part 1: Terms and definitions | |
| Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery | |
| Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation. | |
| Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation | |
| Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery | |
| Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines | |
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for... | |
| Safety of machinery - Security aspects related to functional safety of safety-related control systems (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3: Cutting machines. | |
| SAFETY OF MACHINERY. SAFETY-RELATED PARTS OF CONTROL SYSTEMS. PART 100: GUIDE ON THE USE AND APPLICATION OF EN 954-1:1996. | |
| Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline (Endorsed by AENOR in January of 2016.) | |
| Secure Signature-Creation Devices "EAL 4+" | |
| Security for industrial automation and control systems - Part 1-5: Scheme for IEC 62443 security profiles (Endorsed by Asociación Española de Normalización in July of 2024.) | |
| Security for industrial automation and control systems - Part 6-2: Security evaluation methodology for IEC 62443-4-2 (Endorsed by Asociación Española de Normalización in November of 2025.) | |
| Semi-finished products for forging - Tolerances on dimensions shape and mass | |
| Shell boilers - Part 14: Guideline for involvement of an inspection body independent of the manufacturer. | |
| SmartHouse Code of Practice | |
| Soil improvers and growing media - Guidelines for the safety of users, the environment and plants | |
| Soil improvers and growing media - Labelling, specifications and product schedules | |
| Solid fertilizers - Study on homogeneity. | |
| Specification and verification of energy consumption for railway rolling stock (Endorsed by AENOR in January of 2014.) | |
| Speech Processing, Transmission & Quality Aspects (STQ); QoS parameter definitions and measurements; Part 1: Parameters for voice telephony service required under the ONP Voice Telephony Directive 98/10/EC. | |
| Speech Processing, Transmission and Quality Aspects (STQ); User related QoS parameter definitions and measurements; Part 1: General | |
| Speech Processing, Transmission and Quality Aspects (STQ);User related QoS parameter definitions and measurements;Part 1: General | |
| Speech Processing, Transmission and Quality Aspects (STQ);User related QoS parameter definitions and measurements;Part 2: Voice telephony, Group 3 fax, modem data services and SMS | |
| Speech Processing, Transmission and Quality Aspects (STQ);User related QoS parameter definitions and measurements;Part 3: QoS parameters specific to Public Land Mobile Networks (PLMN) | |
| Speech Processing, Transmission and Quality Aspects (STQ);User related QoS parameter definitions and measurements;Part 4: Internet access | |
| Stainless steels - Part 1: List of stainless steels | |
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes | |
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes (Endorsed by AENOR in September of 2006.) | |
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | |
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes | |
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes (Endorsed by AENOR in September... | |
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | |
| Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | |
| Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | |
| STAINLESS STEELS. PART 1: LIST OF STAINLESS STEELS. | |
| STAINLESS STEELS. PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP FOR GENERAL PURPOSES. | |
| STAINLESS STEELS. PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS FOR GENERAL PURPOSES. | |
| Steel for the reinforcement of concrete - Weldable reinforcing steel - General | |
| Steel rod for drawing and/or cold rolling - Dimensions and tolerances | |
| STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS. | |
| Steel sheet and strip for welded gas cylinders | |
| Steels and cast irons - Determination of nickel content - Flame atomic absorption spectrometric method (FAAS) | |
| Steels for quenching and tempering - Part 1: General technical delivery conditions | |
| Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels | |
| Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels | |
| Straight ammonium nitrate fertilizers - Comparative study on the determination of porosity (oil retention). | |
| Structural steel equal and unequal leg angles - Part 1: Dimensions | |
| Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions | |
| Structural steel I and H sections - Tolerances on shape and dimensions | |
| Superfine woven wool fabric labelling - Requirements for Super S code definition | |
| Technical Requirements for Current Collectors for ground-level feeding system on road vehicles in operation (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Technical Specification for ground-based feeding systems for dynamic electric road charging infrastructure on road vehicles in operation (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Telecommunications Security. A guide to specifying requirements for cryptographic algorithms. | |
| Telecommunications Security; Trusted Third Parties ( TTP); Requirements for TTP services. | |
| Traceability of fishery products - Specification on the information to be recorded in captured fish distribution chains | |
| Transportable gas cylinders - Porous masses for acetylene cylinders. | |
| Tumble dryers for commercial use - Methods for measuring the performance (Endorsed by AENOR in June of 2015.) | |
| Unfired pressure vessels - Part 7: Guidance on the use of the conformity procedures (Endorsed by Asociación Española de Normalización in September of 2019.) | |
| Unfired pressure vessels - Part 7: Guidance on the use of the conformity procedures. | |
| Use of LED signal heads in road traffic signal systems | |
| Value added purchasing management - Part 1: General criteria | |
| Value added purchasing management - Part 2: Accredited structure and process for certification bodies | |
| VALVE STEELS AND ALLOYS FOR INTERNAL COMBUSTION ENGINES. | |
| Ventilation for buildings - Design criteria for the indoor environment | |
| Ventilation for buildings - Experimental determination of mechanical energy loss coefficients of air handling components | |
| Vocabulary of heat treatment terms for ferrous products | |
| Water boilers and auxiliary installations - Part 17: Guideline for the involvement of an inspection body independent of the manufacturer. | |
| Welding - Guidelines for a metallic material grouping system (ISO/TR 15608:2000) | |
| Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding | |
| Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding | |
| WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS. | |
| Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels | |
| Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels | |
| Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys | |
| Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons | |
| Welding. Recomendations for welding of metallic materials. Part 1: General guidance for arc welding. | |
| Welding. Recomendations for welding of metallic materials. Part 5: Welding of clad steel | |
| WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS. PART 1: GENERAL GUIDANCE FOR ARC WELDING. | |
| Welding. Recommendations for welding of metallic materials. Part 3: Arc welding of stainless steels. | |
| Welding. Recommendations for welding of metallic materials. Part 4: Arc welding of aluminium and aluminium alloys. | |
| Welding. Recommendations for welding of metallic materials. Part 7: Electron beam welding. | |
| Welding. Recommendations for welding of metallic materials. Part 8: Welding of cast irons | |
| Wind energy generation systems - Part 26-3: Availability for wind power stations (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Wind turbines - Electromagnetic compatibility | |
| Wind turbines - Part 14: Declaration of apparent sound power level and tonality values (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Wind turbines - Part 26-1: Time-based availability for wind turbine generating systems | |
| Wind turbines - Part 26-2: Production-based availability for wind turbines (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote | |
| WOOD PRESERVATIVES- CREOSOTE AND CREOSOTED TIMBER - METHODS OF SAMPLING AND ANALYSIS - PART 2: PROCEDURE FOR OBTAINING A SAMPLE OF CREOSOTE FROM CREOSOTED TIMBER FOR SUBSEQUENT ANALYSIS (Endorsed by... | |
| WOOD PRESERVATIVES. CREOSOTE AND CREOSOTED TIMBER. METHODS OF SAMPLING AND ANALYSIS. PART 1: PROCEDURE FOR SAMPLING CREOSOTE. (Endorsed by AENOR in September of 1995.) | |
| Workplace atmospheres - Scientific basis to describe the influence of the reference period on the presentation of exposure data |
| << Prev | Next >> |