AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics | |
| ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION. | |
| Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives | |
| ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE | |
| ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS. DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength (Endorsed by AENOR in July of 2003.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength (Endorsed by AENOR in October of 2005.) | |
| Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | |
| AGRICULTURAL AND FORESTRY MACHINERY. PEDESTRIAN CONTROLLED MOTOR MOWERS. SAFETY. | |
| Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Part 1: General. | |
| Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Part 2: Field crop sprayers. | |
| Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Part 3: Air-assisted sprayers for bush and tree crops. | |
| Anti-glare screens for roads - Part 1: Performance and characteristics | |
| Anti-glare systems for roads - Part 1: Performance and characteristics. | |
| Anti-glare systems for roads - Part 2: Test methods. | |
| Biotechnology - Guidance on assessment of the purity, biological activity and stability of microorganism based products | |
| Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations | |
| Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments | |
| Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the functional expression of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified microorganisms, including viruses | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified microorganisms, including viruses | |
| Biotechnology - Performance criteria for shaft seals | |
| Bituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor | |
| Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen. | |
| Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution. | |
| Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution | |
| Bituminous mixtures - Test methods - Part 10: Compactability | |
| Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen | |
| Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens | |
| Bituminous mixtures - Test methods - Part 13: Temperature measurement | |
| Bituminous mixtures - Test methods - Part 14: Water content | |
| Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity | |
| Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres | |
| Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens | |
| Bituminous mixtures - Test methods - Part 18: Binder drainage | |
| Bituminous mixtures - Test methods - Part 19: Permeability of specimen | |
| Bituminous mixtures - Test methods - Part 1: Soluble binder content | |
| Bituminous mixtures - Test methods - Part 20: Indentation using cube or Marshall specimens | |
| Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens | |
| Bituminous mixtures - Test methods - Part 22: Wheel tracking | |
| Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens | |
| Bituminous mixtures - Test methods - Part 24: Resistance to fatigue | |
| Bituminous mixtures - Test methods - Part 25: Cyclic compression test | |
| Bituminous mixtures - Test methods - Part 26: Stiffness | |
| Bituminous mixtures - Test methods - Part 27: Sampling | |
| Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content, water content and grading | |
| Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen | |
| Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution | |
| Bituminous mixtures - Test methods - Part 30: Specimen preparation by impact compactor | |
| Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor | |
| Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor | |
| Bituminous mixtures - Test methods - Part 34: Marshall test | |
| Bituminous mixtures - Test methods - Part 35: Laboratory mixing | |
| Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement | |
| Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA) | |
| Bituminous mixtures - Test methods - Part 39: Binder content by ignition | |
| Bituminous mixtures - Test methods - Part 3: Bitumen recovery: Rotary evaporator | |
| Bituminous mixtures - Test methods - Part 40: In situ drainability | |
| Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt | |
| Bituminous mixtures - Test methods - Part 44: Crack propagation by semi-circular bending test | |
| Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test | |
| Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests | |
| Bituminous mixtures - Test methods - Part 48: Interlayer Bonding | |
| Bituminous mixtures - Test methods - Part 49: Determination of friction after polishing | |
| Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column | |
| Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method | |
| Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of mixtures with bitumen emulsion | |
| Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction | |
| Bituminous mixtures - Test methods - Part 5: Determination of the maximum density | |
| Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens | |
| Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays | |
| Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens | |
| Bituminous mixtures - Test methods fo hot mix asphalt - Part 17: Particle loss of porous asphalt specimen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Par 7: Determination of bulk density of bituminous specimens by gamma rays. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactibility | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen (Endorsed by AENOR in December of 2007.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or Marshall specimens (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or Marshall specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column. | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the reference density. | |
| BITUMINOUS MIXTURES. TEST METHODS FOR HOT MIX ASPHALT. PART 10: COMPACTABILITY. | |
| Cathodic protection of steel in concrete. | |
| Chair care articles. Reclined cradles. | |
| Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods | |
| Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)... | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. BASIC FUNGICIDAL ACTIVITY. TEST METHOD AND REQUIREMENTS (PHASE 1). | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF BACTERICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC, AND INSTITUTIONAL AREAS. TEST METHOD AND REQUIREMENTS... | |
| Chemical used for treatment of water intended for human consumption - Potassium peroxomonosulfate | |
| Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ | |
| Chemicals used for treatment of water intended for human consumption - Ozone | |
| Chemicals used for treatment of water intended for human consumption - Potassium permanganate | |
| Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfate | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CHLORINE DIOXIDE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. OZONE. | |
| Chemicals used for treatment of water intended for human consumption. Potassium permanganate. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POTASSIUM PEROXOMONOSULFATE. | |
| Child care articles - Baby walking frames - Safety requirements and test methods. | |
| Child care articles - Baby walking frames - Safety requirements and test methods | |
| Child care articles - Reclined cradles - Part 1: Reclined cradles for children up to when they start to try to sit up | |
| Child care articles - Table mounted chairs - Safety requirements and test methods | |
| CHILD CARE ARTICLES. TABLE MOUNTED CHAIRS. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Child use and care articles - Baby walking frames - Safety requirements and test methods | |
| Child use and care articles - Reclined cradles | |
| Classification of thermosetting wood adhesives for non-structural applications. | |
| Classification of thermosetting wood adhesives for non-structural applications | |
| Concrete compactors and smoothing machines - Safety | |
| Cookware - Pressure cookers for domestic use. | |
| Cookware - Pressure cookers for domestic use | |
| Copper and copper alloys - Seamless, round copper tubes for air condi-tioning and refrigeration - Part 2: Tubes for equipment | |
| Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems | |
| Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment | |
| Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems | |
| Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment | |
| COPPER AND COPPER ALLOYS. SEAMLESS, ROUND COPPER TUBER FOR AIR CONDITIONING AND REFRIGERATION. PART 2: TUBES FOR EQUIPMENT. | |
| COPPER AND COPPER ALLOYS. SEAMLESS, ROUND COPPER TUBES FOR AIR CONDITIONING AND REFRIGERATION. PART 1: TUBES FOR PIPING SYSTEMS. | |
| Cranes - Information for use and testing - Part 1: Instructions | |
| Cranes - Information for use and testing - Part 2: Marking | |
| Cranes. Information for use and testing. Part 1: Instructions. | |
| CRANES. INFORMATION FOR USE AND TESTING. PART 2: MARKING | |
| Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A | |
| Direct gas-fired hot air blowers for use in greenhouses and supplemntary non-domestic space heating. | |
| Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) | |
| EARTH-MOVING MACHINERY. RUBBER-TYRED MACHINES. STEERING REQUIREMENTS. (ISO 5010:1992 MODIFIED). | |
| Electrically propelled road vehicles. Airborne acoustical noise of vehicle during charging with on-board chargers. Determination of sound power level. | |
| Execution of special geotechnical work - Displacement piles | |
| Execution of special geotechnical work - Grouting | |
| Execution of special geotechnical work - Jet grouting | |
| EXECUTION OF SPECIAL GEOTECHNICAL WORK. GROUTING. | |
| Execution of special geotechnical works - Displacement piles | |
| Execution of special geotechnical works - Jet grouting. | |
| FIBRE-CEMENT PIPES AND FITTINGS FOR DISCHARGE SYSTEMS FOR BUILDINGS. DIMENSIONS AND TECHNICAL TERMS OF DELIVERY. | |
| FIBREBOARD DRUMS - REMOVABLE HEAD (OPEN HEAD) DRUMS WITH CLOSING RINGS WITH A NOMINAL CAPACITY OF 15 l TO 250 l. | |
| Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading | |
| FLEXIBLE SHEETS FOR WATERPROOFING. BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING. DETERMINATION OF RESISTANCE TO IMPACT. | |
| FLEXIBLE SHEETS FOR WATERPROOFING. BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING. DETERMINATION OF RESISTANCE TO STATIC LOADING. | |
| Floor heating - Systems and components - Part 4: Installation. | |
| FLOOR HEATING. SYSTEMS AND COMPONENTS. PART 1: DEFINITIONS AND SYMBOLS. | |
| FLOOR HEATING. SYSTEMS AND COMPONENTS. PART 2: DETERMINATION OF THE THERMAL OUTPUT. | |
| FLOOR HEATING. SYSTEMS AND COMPONENTS. PART 3: DIMENSIONING. | |
| FOOTWEAR - AGEING CONDITIONING | |
| FOOTWEAR - TEST METHODS FOR INSOLES - ABRASION RESISTANCE | |
| FOOTWEAR - TEST METHODS FOR INSOLES - DELAMINATION RESISTANCE | |
| FOOTWEAR - TEST METHODS FOR INSOLES - HEEL PIN HOLDING STRENGTH | |
| FOOTWEAR - TEST METHODS FOR INSOLES - RESISTANCE TO STITCH TEAR | |
| FOOTWEAR - TEST METHODS FOR INSOLES AND INSOCKS - WATER ABSORPTION AND DESORPTION. | |
| Footwear - Test methods for insoles and insocks - Water absorption and desorption | |
| FOOTWEAR - TEST METHODS FOR OUTSOLES - ABRASION RESISTANCE | |
| Footwear - Test methods for outsoles - Compression energy. | |
| FOOTWEAR - TEST METHODS FOR OUTSOLES - COMPRESSION ENERGY | |
| FOOTWEAR - TEST METHODS FOR OUTSOLES - DIMENSIONAL STABILITY | |
| FOOTWEAR - TEST METHODS FOR OUTSOLES - NEEDLE TEAR STRENGTH | |
| FOOTWEAR - TEST METHODS FOR OUTSOLES - TEAR STRENGTH | |
| FOOTWEAR - TEST METHODS FOR OUTSOLES, INSOLES, LINING AND INSOCKS - WATER SOLUBLE CONTENT | |
| FOOTWEAR - TEST METHODS FOR WHOLE SHOE - HEEL ATTACHMENT. | |
| FOOTWEAR - TEST METHODS FOR WHOLE SHOE - THERMAL INSULATION | |
| FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS | |
| Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance. | |
| Founding - Radiographic examination | |
| Founding - Radiographic testing - Part 1: Film techniques | |
| Founding - Radiographic testing - Part 2: Techniques with digital detectors | |
| Founding - Ultrasonic examination - Part 1: Steel castings for general purposes | |
| Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components | |
| Founding - Ultrasonic examination - Part 3: Spheroidal graphite cast iron castings | |
| Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings | |
| Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high performance liquid chromatography | |
| Fruit and vegetable juices - Determination of the free amino acids content - Liquid chromatographic method | |
| Fruit and vegetable juices - Enzymatic determination of acetic acid (acetate) content - NAD Spectrometric method | |
| Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method | |
| Furniture - Assessment of surface resistance to cold liquids | |
| Furniture - Assessment of surface resistance to dry heat | |
| Furniture - Assessment of surface resistance to wet heat | |
| Furniture - Ranked seating - Requirements for safety, strength and durability | |
| FURNITURE. ASSESSMENT OF SURFACE RESISTANCE TO COLD LIQUIDS. (ISO 4211:1979 MODIFIED). | |
| FURNITURE. ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT. (ISO 4211-3: 1993 MODIFIED). | |
| FURNITURE. ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT. (ISO 4211-2:1993, MODIFIED). | |
| FURNITURE. RANKED SEATING. TEST METHODS AND REQUIREMENTS FOR STRENGTH AND DURABILITY. | |
| Gas infrastructure - Welding steel pipework - Functional requirements | |
| GAS SUPPLY SYSTEMS. WELDING STEEL PIPEWORK. FUNCTIONAL REQUIREMENTS. | |
| GAS-FIRED TYPE B TUMBLE DRYERS OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW. PART 1: SAFETY | |
| GAS-FIRED TYPE B TUMBLE DRYERS OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW. PART 2: RATIONAL USE OF ENERGY | |
| Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties. | |
| Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties | |
| Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules | |
| GYMNASTIC EQUIPMENT - HANGING RINGS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS | |
| Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases | |
| Industrial valves - Socket welding ends for steel valves | |
| Industrial valves - Test of flow resistance using water as test fluid | |
| Industrial, commercial and garage doors and gates - Installation and use. | |
| Industrial, commercial and garage doors and gates - Installation and use | |
| Intermodal loading units and commercial vehicles - Lashing points for cargo securing - Minimum requirements and testing | |
| Intermodal loading units and commercial vehicles - Tarpaulins - Part 1: Minimum requirements | |
| Intermodal loading units and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders | |
| IRRIGATION TECHNIQUES. QUICK COUPLING PIPES FOR MOVABLE IRRIGATION SUPPLY. TECHNICAL CHARACTERISTICS AND TESTING | |
| Lead and lead alloys - Lead | |
| Light and lighting - Basic terms and criteria for specifying lighting requirements. | |
| Light and lighting - Basic terms and criteria for specifying lighting requirements | |
| Liquid petroleum products - Determination of contamination in middle distillates | |
| Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels | |
| Liquid petroleum products - Determination of total contamination - Part 2: Fatty acid methyl esters | |
| Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters | |
| LIQUID PETROLEUM PRODUCTS. DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES | |
| Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units (Endorsed by AENOR in December of 2000.) | |
| Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy | |
| LIQUID PUMPS AND PUMP UNITS. NOISE TEST CODE. GRADE 2 AND 3 OF ACCURACY. | |
| Liquid pumps and pump units. Noise test code. Grade 2 and Grade 3 of accuracy. | |
| Machines for the manufacture of constructional products from concrete and calcium silicate. Safety. Part 5-2: Pipe making machines manufacturing in the horizontal axis | |
| Machines for the manufacture of constructional products from concrete and calcium silicate. Safety. Part 5-3: Pipe prestressing machines | |
| Machines for the manufacture of constructional products from concrete and calcium silicate. Safety. Part 5-4: Concrete pipe coating machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines (Endorsed by AENOR in October of 2010.) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis (Endorsed by AENOR in October of... | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis (Endorsed by AENOR in October of... | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines (Endorsed by AENOR in October of 2010.) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines (Endorsed by AENOR in October of 2010.) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products (Endorsed by AENOR... | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (Endorsed by AENOR... | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) (Endorsed... | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Part 3: Slide and turntable machines. | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Part 4: Concrete roof tile making machines. | |
| MECHANICAL SEALS. PRINCIPAL DIMENSIONS, DESIGNATION AND MATERIAL CODES. | |
| Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing | |
| Natural stone - Terminology. | |
| Natural stone - Terminology | |
| NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments | |
| NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES. | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment | |
| Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method | |
| Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources | |
| NON-DESTRUCTIVE TESTING. CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT. PART 1: INSTRUMENTS. | |
| NON-DESTRUCTIVE TESTING. CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT. PART 3: COMBINED EQUIPMENT. | |
| Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules | |
| Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules. | |
| Passive safety of support structures for road equipment - Requirements and test methods | |
| Passive safety of support structures for road equipment - Requirements, classification and test methods | |
| PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT. REQUIREMENTS AND TEST METHODS. | |
| Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method | |
| Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas... | |
| PETROLEUM PRODUCTS AND USED OILS- DETERMINATION OF PCBs AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR... | |
| Petroleum products and used oils. Determination of PCBs and related products. Part 2: Calculation of polychlorinated biphenyl (PCB) content. | |
| PLASTIC DRUMS - NON REMOVABLE HEAD (TIGH HEAD) DRUMS WITH A NOMINAL CAPACITY OF 210 L, 220 L AND 225 L. | |
| Plastic drums. Removable head (open head) drums with a nominal capacity of 25 l to 220 l. | |
| Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l | |
| Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l | |
| Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L | |
| Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm... | |
| Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (Endorsed by AENOR in August of 2006.) | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system | |
| PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPING SYSTEMS FOR BURIED NON-PRESSURE APPLICATIONS. TEST METHODS FOR LEAKTIGHTNESS OF ELASTOMERIC SEALING RING TYPE JOINTS. | |
| Playing field equipment - Basketball equipment - Functional and safety requirements, test methods | |
| Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods | |
| PLAYING FIELD EQUIPMENT. BASKETBALL EQUIPMENT. FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| PLAYING FIELD EQUIPMENT. VOLLEYBALL EQUIPMENT. FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l. | |
| Precast concrete products - Floor slats for livestock | |
| PRESSURE GAUGES -APPARATUS FOR INSPECTION OF PRESSURE AND/OR INFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete | |
| Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) | |
| Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons | |
| RAILWAY APPLICATIONS. STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES. | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors | |
| ROLL CONTAINERS - PART 1: TERMINOLOGY | |
| Roll containers - Part 2: General design and safety principles | |
| Roll containers - Part 3: Test methods | |
| Roll containers - Part 4: Performance requirements | |
| Rubber- or plastic-coated fabrics - Determination of resistance to liquids | |
| Safety nets - Part 1: Safety requirements, test methods | |
| Safety nets - Part 2: Safety requirements for the positioning limits | |
| SAFETY NETS. PART 1: REQUIREMENTS, TEST METHODS. | |
| SAFETY NETS. PART 2: SAFETY REQUIREMENTS FOR THE ERECTION OF SAFETY NETS. | |
| Safety of machine tools - Drilling machines | |
| SAFETY OF MACHINE TOOLS. DRILLING MACHINES. | |
| Safety of machinery - Noise test code for foundry machines and equipment | |
| Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards | |
| SAFETY OF MACHINERY. GUIDANCE FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS | |
| Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements | |
| Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements | |
| Safety of woodworking machines - Four sided moulding machines | |
| Safety of woodworking machines - Four-sided moulding machines | |
| SAFETY OF WOODWORKING MACHINES. FOUR-SIDED MOULDING MACHINES. | |
| Sanitary appliances - Specification for whirlpool baths | |
| SCREW CAP CLOSURE SYSTEMS FOR PLASTICS CONTAINERS WITH NOMINAL CAPACITY OF 20 l TO 60 l. | |
| Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements | |
| Securing of cargo on road vehicles- Body structure of commercial vehicles- Minimum requirements. | |
| Securing of cargo on road vehicles. Lashing points on commercial vehicles for goods transportation. Minimum requirements and testing. | |
| SOLID WOOD PANELS. CLASSIFICATION AND TERMINOLOGY. | |
| STEEL DRUMS - NON-REMOVABLE HEAD (TIGH HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 230 l. | |
| Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials. | |
| SURFACE ACTIVE AGENTS - DETERMINATION OF FOAMING POWER - PERFORATED DISC BEATING METHOD | |
| Swap bodies and commercial vehicles - Tarpaulins - Part 1: Minimum requirements | |
| Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders | |
| Swap bodies. Tarpaulines. Part 1: Minimum requirements. | |
| Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods (Endorsed by AENOR in July of 2016.) | |
| Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods | |
| Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits | |
| Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test | |
| Textile floorcoverings - Assessment of impregnations in needled floorcoverings by means of a soiling test | |
| TEXTILE FLOORCOVERINGS. ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOORCOVERINGS BY MEANS OF A SOILING TEST. | |
| TEXTILE GLASS - YARNS - PART 1: DESIGNATION | |
| TEXTILE GLASS - YARNS - PART 2: METHODS OF TEST AND GENERAL SPECIFICATIONS | |
| TEXTILE GLASS - YARNS - PART 3: GENERAL REQUIREMENTS FOR GENERAL APPLICATIONS | |
| TEXTILES - SAMPLING OF FIBRES, YARNS AND FABRICS FOR TESTING | |
| Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements | |
| Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low... | |
| Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance. | |
| Thermal spraying - Powders - Composition, technical supply conditions | |
| THERMAL SPRAYING. POWDERS. COMPOSITION. TECHNICAL SUPPLY CONDITIONS. | |
| Traffic signal controllers - Functional safety requirements | |
| TRAFFIC SIGNAL CONTROLLERS. FUNCTIONAL SAFETY REQUIREMENTS. | |
| TRANSPORTABLE GAS CYLINDERS. CYLINDERS FOR DISSOLVED ACETYLENE. INSPECTION AT TIME OF FILLING. | |
| TRANSPORTABLE GAS CYLINDERS. FILLING CONDITIONS FOR ACETYLENE BUNDLES. | |
| Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing | |
| Valves - Socket welding ends for steel valves | |
| VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID. | |
| WALL COVERINGS - SPECIFICATION FOR CORK PANELS. | |
| Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols | |
| Water based surface embedded heating and cooling systems - Part 2: Floor heating: Methods for the determination of the thermal output using calculations and experimental tests | |
| Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods | |
| Water based surface embedded heating and cooling systems - Part 3: Dimensioning | |
| Water based surface embedded heating and cooling systems - Part 4: Installation | |
| Water based surface embedded heating and cooling systems - Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling | |
| Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output | |
| Water quality - Detection and enumeration of Pseudomonas aeruginosa by membrane filtration. | |
| Water quality - Gas chromatographic determination of some selected chlorophenols in water |
| << Prev | Next >> |