AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| (Endorsed by AENOR in December of 1996.) | |
| Adhesives - Determination of elastic behaviour of liquid adhesives ("elasticity index"). | |
| Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) | |
| Adhesives - Determination of free monomer content in adhesives based on synthetic polymers. | |
| Adhesives for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives. | |
| Adhesives for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life or solvent-based and dispersion adhesives | |
| Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature. | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance. | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance | |
| ADHESIVES FOR TILES - DETERMINATION OF SLIP. | |
| Adhesives for tiles - Determination of slip | |
| ADHESIVES FOR TILES. DETERMINATION OF SLIP. | |
| Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas | |
| Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods | |
| Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWN WIRE. PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWN WIRE. PART 2: MECHANICAL PROPERTIES. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. DRAWN WIRE. PART 3: TOLERANCES ON DIMENSIONS. | |
| AUTOMOTIVE LPG-SYSTEMS - INSTALLATION REQUIREMENTS. | |
| Biotechnology - Performance criteria for filter elements and filtration assemblies | |
| Biotechnology - Performance criteria for off-gas systems | |
| BIOTECHNOLOGY. EQUIPMENT. GUIDANCE ON SAMPLING AND INOCULATION PROCEDURES. | |
| Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method | |
| Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions | |
| Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation | |
| Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation | |
| Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilization after recovery by evaporation | |
| Bitumen and bituminous binders. Determination of breaking behaviour. Part 1: Determination of breaking value of cationic bitumen emulsions, miner filler method. | |
| Bitumen and bituminous binders. Determination of breaking behaviour. Part 2: Determination of fines mixing time of cationic bitumen emulsions. | |
| Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation. | |
| Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete | |
| Blank Detail Specification: Aluminium electrolytic capacitors with non-solid electrolyte (Endorsed by AENOR in May of 2002.) | |
| BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC CAPACITORS FOR DIRECT CURRENT. ASSESMENT LEVEL E. (Endorsed by AENOR in June of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC CAPACITORS FOR DIRECT CURRENT. ASSESMENT LEVEL EZ. (Endorsed by AENOR in June of 1998.) | |
| Blank Detail Specification: Fixed polyethylene-terepht alate film dielectric metal foil capacitors for direct current - Assessment level E | |
| Blank Detail Specification: Fixed polyethylene-terepht alate film dielectric metal foil capacitors for direct current - Assessment level EZ | |
| BLANK DETAIL SPECIFICATION: FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS. ASSESMENT LEVEL E (Endorsed by AENOR in June of 1998.) | |
| BLANK DETAIL SPECIFICATION: FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS. ASSESMENT LEVEL EZ (Endorsed by AENOR in June of 1998.) | |
| Blank Detail Specification: Fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2) | |
| Blank Detail Specification: Fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3) | |
| Blank Detail Specification: Tantalum surface mounting capacitors (Endorsed by AENOR in May of 2002.) | |
| Building hardware - Cylinders for locks - Requirements and test methods | |
| BUILDING HARDWARE. CYLINDERS FOR LOCKS. REQUIREMENTS AND TEST METHOD. | |
| CARBON FIBER YARNS - PART 2: TEST METHODS AND GENERAL SPECIFICATIONS | |
| CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES. | |
| Ceramic machines - Safety - Loading and unloading of fine clay tiles. | |
| Ceramic machines - Safety - Loading and unloading of fine clay tiles | |
| Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods | |
| Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods | |
| Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance (Endorsed by AENOR in August of 2006.) | |
| Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance | |
| Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions | |
| Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys | |
| Clay roofing tiles and fittings - Product definitions and specifications | |
| CLAY ROOFING TILES FOR DISCONTINUOUS LAYING - PRODUCTS, DEFINITIONS AND SPECIFICATIONS. | |
| CLAY ROOFING TILES FOR DISCONTINUOUS LAYING. PRODUCTS DEFINITIONS AND SPECIFICATIONS. | |
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements | |
| CONNECTIONS FOR GAS SAMPLING TUBES TO ANAESTHESIC AND RESPIRATORY EQUIPMENT | |
| Connections for gas sampling tubes to anaesthetic and respiratory equipment. | |
| Cookware - Domestic cookware for use on top of a cooking range or hob - Part 2: Additional requirements for ceramic cookware and glass lid (Endorsed by Asociación Española de... | |
| Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements (Endorsed by Asociación Española de Normalización in April of 2023.) | |
| Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements. | |
| Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements | |
| Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 2: General requirements for ceramic cookware and glass lid (Endorsed by Asociación Española de... | |
| Crane safety - General design - Part 1: General principles and requirements | |
| Crane safety - General design - Part 2: Load actions | |
| Crane safety - General design - Part 2: Load effects | |
| Cranes - General design - Part 1: General principles and requirements | |
| Cranes - General design - Part 2: Load actions | |
| Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | |
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems | |
| Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts | |
| Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings (Endorsed by Asociación Española de Normalización in March of 2019.) | |
| Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks | |
| Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks | |
| Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | |
| Cranes - Loader cranes | |
| Cranes - Mobile cranes | |
| Cranes safety - General design - Part 2: Load effects | |
| Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray | |
| Curtain Walling - Watertightness - Site test. | |
| Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B | |
| Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A, type B. | |
| Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C | |
| Devices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A - Type A | |
| Devices to prevent pollution by backflow of potable water. Air gap with injector. Family A. Type D. | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature... | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature. | |
| Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (Endorsed by AENOR in July of 2010.) | |
| Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements | |
| FOODSTUFFS - DETERMINATION OF AFLATOXIN B1, AND THE SUM OF AFLATOXINS B1, B2, G1 AND G2 IN CEREALS, SHELL-FRUITS AND DERIVED PRODUCTS. HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST COLUMN... | |
| FOOTWEAR - TEST METHODS FOR SHANKS - FATIGUE RESISTANCE. | |
| Footwear - Test methods for shanks - Fatigue resistance | |
| FOOTWEAR - TEST METHODS FOR SHANKS - LONGITUDINAL STIFFNESS. | |
| Footwear - Test methods for whole shoe - Water resistance. | |
| Free-standing chimneys - Part 1: General requirements | |
| Free-standing chimneys - Part 2: Concrete chimneys | |
| Free-standing chimneys - Part 4: Brick liners - Design and execution (Endorsed by AENOR in August of 2006.) | |
| Free-standing chimneys - Part 4: Brick liners - Design and execution | |
| Free-standing chimneys - Part 5: Material for brick liners - Product specifications | |
| Free-standing chimneys - Part 6: Steel liners - Design and execution | |
| Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners | |
| Free-standing chimneys - Part 9: Lifetime management - Monitoring, inspection, maintenance, remedial and reporting; Operations and actions required | |
| FREE-STANDING CHIMNEYS. PART 2: CONCRETE CHIMNEYS. | |
| Free-standing industrial chimneys - Part 1: General requirements. | |
| Free-standing industrial chimneys - Part 8: Design and execution of mast construction with satellite components | |
| General principles of cathodic protection of buried or immersed onshore metallic structures | |
| GENERIC SPECIFICATION: FIXED CAPACITORS. (Endorsed by AENOR in December of 1996.) | |
| GENERIC SPECIFICATION: FIXED CAPACITORS. (Endorsed by AENOR in June of 1998.) | |
| GENERIC SPECIFICATION:FIXED CAPACITORS (Endorsed by AENOR in December of 1996.) | |
| Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing | |
| Glass in building - Structural sealant glazing - Part 2: Assembly rules | |
| Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and descripcion. | |
| Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Greenhouses - Design and construction - Part 1: Commercial production greenhouses | |
| Greenhouses - Design and construction - Part 2: Greenhouses open to the public | |
| GS: FIXED CAPACITORS. (INCLUDES A1 TO A5). (Endorsed by AENOR in December of 1996.) | |
| Health informatics - Service architecture - Part 1: Enterprise viewpoint (Endorsed by AENOR in December of 2007.) | |
| Health informatics - Service architecture - Part 2: Information viewpoint (Endorsed by AENOR in December of 2007.) | |
| Health informatics - Service architecture - Part 3: Computational viewpoint (Endorsed by AENOR in December of 2007.) | |
| Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient. | |
| Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves | |
| INDUSTRIAL VALVES. END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES. | |
| Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods | |
| Industrial, commercial and garage doors and gates and pedestrian doorsets - Protective devices for power operated doors and gates - Requirements and test methods | |
| Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Part 1: Test method. | |
| Inland navigation vessels - Connections for the discharge of oily mixture | |
| Inland navigation vessels - Connections for the discharge of waste water | |
| Inland navigation vessels - Stairs with inclination angles of 30° to < 45° - Requirements, types (Endorsed by AENOR in June of 2000.) | |
| Intermodal Loading Units - Marking - Part 1: Markings for identification | |
| Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation | |
| Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation | |
| Lead and lead alloys. Lead oxides. | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places (Endorsed by AENOR in... | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of workplaces | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 5: Presentation of data for luminaires used for road lighting | |
| Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout | |
| Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications | |
| Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) | |
| Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 C and 100 C | |
| Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) | |
| LIQUID PETROLEUM PRODUCTS. VAPOUR PRESSURE. PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP). | |
| LIQUID PETROLEUM PRODUCTS. VAPOUR PRESSURE. PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40ºC AND 100ºC | |
| LPG equipment and accessories - Automotive LPG-systems - Installation requirements | |
| Machine tools - Safety - Electro discharge machines | |
| Machine tools- Safety- Electro Discharge Machines. | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (Endorsed by AENOR in April of 2010.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (Endorsed by AENOR in August of 2006.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory (Endorsed by AENOR in... | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory (Endorsed by AENOR in... | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (Endorsed by AENOR in June of 2010.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (Endorsed by AENOR in October of 2003.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (Endorsed by AENOR in October of 2009.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (Endorsed by AENOR in February of 2010.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (Endorsed by AENOR in October of 2003.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (Endorsed by AENOR in August... | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (Endorsed by AENOR in February... | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (Endorsed by AENOR in August of 2006.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (Endorsed by AENOR in February of 2010.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (Endorsed by AENOR in August of 2006.)... | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (Endorsed by AENOR in January of 2010.)... | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (Endorsed by AENOR in April of 2010.) | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (Endorsed by AENOR in August of 2006.) | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (Endorsed by AENOR in December of 2009.) | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (Endorsed by AENOR in September of 2009.) | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (Endorsed by AENOR in October of 2009.) | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS Machines | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (Endorsed by AENOR in October of 2003.) | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (Endorsed by AENOR in September of 2009.) | |
| Machines for road surface cleaning - Safety requirements | |
| MACHINES FOR ROAD SURFACE CLEANING. SAFETY REQUIREMENTS. | |
| Maintenance for lifts and escalators - Rules for maintenance instructions | |
| Maintenance for lifts and escalators. Rules for maintenance instructions. | |
| Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and for the determination of the mass of the filling (Endorsed by... | |
| Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and of the mass of the filling. | |
| MASTIC ASPHALT FOR WATERPROOFING. DEFINITIONS, REQUIREMENTS AND TEST METHODS. | |
| Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance (Endorsed by AENOR in August... | |
| Means for resealing threaded joints of gas pipework in buildings. | |
| Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation | |
| MECHANICAL VIBRATION AND SHOCK. VIBRATION ISOLATION OF MACHINES. INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION. | |
| Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual | |
| MOUNTAINEERING EQUIPMENT - ICE-TOOLS - SAFETY REQUIREMENTS AND TEST METHODS | |
| Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 | |
| Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing | |
| NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION | |
| Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing | |
| Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties | |
| Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices | |
| Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays | |
| NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES. | |
| Non-destructive testing - Visual testing - General principles | |
| Non-destructive testing of welded joints in thermoplastics semi- finished products - Part 2: X-ray radiographic testing | |
| Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing | |
| Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package. | |
| Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method | |
| Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances | |
| Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml | |
| Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and... | |
| Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and... | |
| Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40 000 ml. | |
| Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures | |
| Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity | |
| Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes | |
| Packaging - Unit packaging - Dimensions and requirements for pegboard display. | |
| PACKAGING. FLEXIBLE ALUMINIUM TUBES. INTERNAL LACQUER FILM THICKNESS MEASUREMTN METHOD. | |
| PACKAGING. FLEXIBLE CONICAL METALLIC TUBES. DIMENSIONS AND TOLERANCES. | |
| PACKAGING. FLEXIBLE CYLINDRICAL METALLIC TUBES. DIMENSIONS AND TOLERANCES. | |
| PACKAGING. FLEXIBLE CYLINDRICAL PLASTIC TUBES. DIMENSIONS AND TOLERANCES. | |
| Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures. | |
| Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml. | |
| Para-aramid fibre filament yarns - Part 1: Designation | |
| Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications | |
| Para-aramid fibre filament yarns - Part 3: Technical specifications | |
| PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS. | |
| Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers | |
| Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies | |
| Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies | |
| Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption. | |
| Protective clothing - Shin guards for association football players - Requirements and test methods. | |
| Protective clothing - Shin guards for association football players - Requirements and test methods | |
| Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) | |
| Protective helmets - Test methods - Part 10: Resistance to radiant heat (Endorsed by AENOR in November of 2012.) | |
| Protective helmets - Test methods - Part 1: Conditions and conditioning. | |
| PROTECTIVE HELMETS - TEST METHODS - PART 1: CONDITIONS AND CONDITIONING | |
| Protective helmets - Test methods - Part 2: Shock absorption (Endorsed by AENOR in November of 2012.) | |
| Protective helmets - Test methods - Part 2: Shock absorption. | |
| Protective helmets - Test methods - Part 3: Resistance to penetration. | |
| Protective helmets - Test methods - Part 4: Retention system effectiveness (Endorsed by AENOR in November of 2012.) | |
| Protective helmets - Test methods - Part 5: Retention system strength (Endorsed by AENOR in November of 2012.) | |
| Protective helmets - Test methods - Part 6: Field of vision (Endorsed by AENOR in November of 2012.) | |
| Protective helmets - Test methods - Part 6: Field of vision. | |
| Protective helmets - Test methods - Part 7: Flame resistance. | |
| Protective helmets - Test methods - Part 8: Electrical properties | |
| PROTECTIVE HELMETS. TEST METHODS. PART 10: RESISTANCE TO RADIANT HEAT. | |
| PROTECTIVE HELMETS. TEST METHODS. PART 2: SHOCK ABSORPTION. | |
| PROTECTIVE HELMETS. TEST METHODS. PART 3: RESISTANCE TO PENETRATION | |
| PROTECTIVE HELMETS. TEST METHODS. PART 4: RETENTION SYSTEM EFFECTIVENESS. | |
| PROTECTIVE HELMETS. TEST METHODS. PART 5: RETENTION SYSTEM STRENGTH. | |
| PROTECTIVE HELMETS. TEST METHODS. PART 6: FIELD OF VISION. | |
| PROTECTIVE HELMETS. TEST METHODS. PART 7: FLAME RESISTANCE. | |
| PROTECTIVE HELMETS. TEST METHODS. PART 8: ELECTRICAL PROPERTIES. | |
| Railway applications - Wheelsets and bogies - Non-powered axles - Design guide | |
| Railway applications - Wheelsets and bogies - Non-powered axles - Design method | |
| Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals | |
| Railway applications - Wheelsets and bogies - Powered axles - Design method (Endorsed by AENOR in February of 2012.) | |
| Railway applications - Wheelsets and bogies - Powered axles - Design method (Endorsed by AENOR in September of 2010.) | |
| Railway applications - Wheelsets and bogies - Powered axles - Design method | |
| Railway applications. Wheelsets and bogies. Non-powered axles. Design method. | |
| RAILWAY APPLICATIONS. WHEELSETS AND BOGIES. POWERED AXLES. DESIGN MEHTOD. | |
| Reinforcements - Specification for textile glass chopped strands - Part 1: Designation | |
| Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements | |
| Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements | |
| Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique. | |
| Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique | |
| Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability | |
| Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test | |
| Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test | |
| Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges | |
| Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test | |
| Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness indices | |
| Road surface treatment machines - Safety requirements | |
| Road vertical signs - Variable message traffic signs - Part 1: Product standard | |
| Road vertical signs - Variable message traffic signs - Part 2: Initial type testing | |
| Road vertical signs - Variable message traffic signs - Part 3: Factory production control | |
| Road vertical signs - Variable message traffic signs | |
| Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber | |
| Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules | |
| Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations | |
| ROUND AND SAWN TIMBER. METHOD OF MEASUREMENT OF FEATURES. | |
| Safety of industrial trucks - Test methods for measuring vibration | |
| SAFETY OF INDUSTRIAL TRUCKS. TEST METHODS FOR MEASURING VIBRATION. | |
| Safety requirements for cableway installations designed to carry persons - Civil engineering works (Endorsed by AENOR in May of 2005.) | |
| Safety requirements for cableway installations designed to carry persons - Civil engineering works | |
| Sectional Specification - Tantalum surface mount capacitors: Amendment to extend CV range (Endorsed by AENOR in December of 2003.) | |
| SECTIONAL SPECIFICATION: ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID AND NON-SOLID ELECTROLYTE. (Endorsed by AENOR in June of 1998.) | |
| SECTIONAL SPECIFICATION: FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC CAPACITORS FOR DIRECT CURRENT. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: FIXED POLYETHYLENE-TEREPHT ALATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT (Endorsed by AENOR in June of 1998.) | |
| SECTIONAL SPECIFICATION: FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (Endorsed by AENOR in June of 1998.) | |
| Sectional Specification: Fixed tantalum capacitors with non-solid or solid electrolyte | |
| Sectional Specification: Tantalum surface mounting capacitors (Endorsed by AENOR in December of 2000.) | |
| Secure storage units - Classification for high security locks according to their resistance to unauthorized opening | |
| Selective waste collection containers - Above-ground mechanically-lifted containers with capacities from 80 l to 5000 l for selective collection of waste. | |
| Shell Boilers - Part 6: Requirements for equipment for the boiler | |
| Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers | |
| Shell boilers - Part 8: Requirements for safeguards against excessive pressure | |
| Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories | |
| Small steam sterilizers. | |
| Small steam sterilizers | |
| SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF ELECTRICAL CONDUCTIVITY. | |
| Soil improvers and growing media - Determination of electrical conductivity | |
| SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF ORGANIC MATTER CONTENT AND ASH. | |
| Soil improvers and growing media - Determination of organic matter content and ash | |
| SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF pH. | |
| Soil improvers and growing media - Determination of pH | |
| Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space | |
| SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY. | |
| Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density | |
| Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage valur and total pore space. | |
| Solar collectors - General requirements | |
| Solid wood panels. Classificacion by surface appearance. Part 2: Hardwood. | |
| Solid wood panels. Classification by surface appearance. Part 1: Softwood. | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections | |
| Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l | |
| Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l | |
| Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity | |
| Surface active agents - Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure | |
| SWAP BODIES - CODING, IDENTIFICATION AND MARKING. | |
| Tanks for the transport of dangerous goods - Metallic gravity-discharge tanks - Design and construction | |
| Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction | |
| TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING,. | |
| TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE. | |
| Tanks for the transport of dangerous goods - Testing, inspection and marking of metallic tanks | |
| Tanks for the transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler. | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve | |
| TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS. | |
| Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks | |
| Textile floor coverings - Classification of pile carpets | |
| Textile floor coverings - Classification | |
| Textile floor coverings- Classification of pile carpet | |
| TEXTILE FLOOR COVERINGS. CLASSIFICATION OF PILE CARPETS. | |
| Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores | |
| Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores | |
| Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment | |
| Thermal solar systems and components - Factory made systems - Part 1: General requirements (Endorsed by AENOR in August of 2006.) | |
| Thermal solar systems and components - Factory made systems - Part 1: General requirements | |
| Thermal solar systems and components - Factory made systems - Part 2: Test methods (Endorsed by AENOR in August of 2006.) | |
| Thermal solar systems and components - Factory made systems - Part 2: Test methods. | |
| Thermal solar systems and components - Factory made systems - Part 2: Test methods | |
| Thermal solar systems and components - Solar collectors - Part 1: General requirements. | |
| Thermal solar systems and components - Solar collectors - Part 1: General Requirements | |
| Thermal solar systems and components - Solar collectors - Part 2: Test methods | |
| Thermal solar systems and components - Solar collectors. Part 2: Test methods. | |
| THERMAL SOLAR SYSTEMS AND COMPONENTS. FACTORY MADE SYSTEMS. PART 1. GENERAL REQUIREMENTS. | |
| Thermal solar systems and components. Solar collectors. Part 2: Test methods. | |
| Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | |
| Transportable gas cylinders - Conditions for filling gases into receptables - Single component gases. | |
| Transportable gas cylinders - Conditions for filling gases into receptacles - Single component gases | |
| Transportable gas cylinders. Conditions for filling gas mixtures into receptacles. | |
| Transportation services - Good transport chains - System for declaration of performance conditions. | |
| VALUE MANAGEMENT. | |
| Value management | |
| Ventilation for buildings - Air handling units - Rating and performance for units, components and sections | |
| Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain | |
| Ventilation for buildings. Air handling units. Ratings and performance for units, components and sections. | |
| WALLCOVERINGS - SPECIFICATION FOR CORK ROLLS. | |
| Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability. | |
| WALLCOVERINGS IN ROLL FORM - DETERMINATION OF DIMENSIONS, STRAIGHTNESS, SPONGEABILITY AND WASHABILITY | |
| Windows - Soft and heavy body impact - Test method, safety requirements and classification | |
| Windows and doors - Soft and heavy body impact - Test method, safety requirements and classification | |
| Winter service machines - Safety requirements | |
| WORKPLACE ATMOSPHERE. GUIDELINES FOR MEASUREMENT OF AIRBORNE MICRO-ORGANISMS AND ENDOTOXIN. | |
| Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements |
| << Prev | Next >> |