AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties (Endorsed by AENOR in August of 2005.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties (Endorsed by AENOR in September of 2003.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties (Endorsed by AENOR in August of 2005.) | |
| ALUMINIUM AND ALUMINIUM ALLOYS - TERMS AND DEFINITIONS - PART 1: GENERAL TERMS. | |
| Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms | |
| Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis | |
| Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap | |
| Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry | |
| Assistive products for persons with disability - General requirements and test methods | |
| BDS: PREPARATION OF CUSTOMER DETAIL SPECIFICATIONS (CDS) AND DETAIL SPECIFICATIONS FOR STANDARD PRODUCTION ITEMS WITH CAPABILITY APPROVAL. (Endorsed by AENOR in November of 1996.) | |
| BDS: RADIO FREQUENCY COAXIAL CONNECTORS. (Endorsed by AENOR in September of 1996.) | |
| Biotechnology - Equipment - Guidance on testing procedures for cleanability | |
| Biotechnology - Equipment - Guidance on testing procedures for leaktightness | |
| Biotechnology - Equipment - Guidance on testing procedures for sterilizability | |
| Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination | |
| Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements | |
| Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plaints | |
| Blank Detail Specification: CECC military specification for radio frequency connectors - Type MIL-C-39012 | |
| Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. | |
| Builders hoists for goods. Part 1: Hoists with accessible platforms. | |
| Builders hoists for persons and materials with vertically guided cages. (Endorsed by AENOR in October of 2001.) | |
| Builders hoists for persons and materials with vertically guided cages. | |
| Builders hoists for persons and materials with vertically guided cages | |
| Builders' hoists for goods - Part 1: Hoists with accessible platforms | |
| Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices | |
| Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods | |
| Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods | |
| Building hardware - Mechanically operated locks and locking plates - Requirements and test methods | |
| Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements | |
| CHANGING UNITS FOR DOMESTIC USE - PART 1: SAFETY REQUIREMENTS | |
| CHANGING UNITS FOR DOMESTIC USE - PART 2: TEST METHODS | |
| Changing units for domestic use- Part 1: Safety requirements | |
| CHARACTERIZATION OF SLUDGE - DETERMINATION OF PH-VALUE | |
| Chemicals used for treatment of water intended for human consumption - Ammonia solution | |
| Chemicals used for treatment of water intended for human consumption - Ammonium sulfate | |
| Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid. | |
| Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid | |
| Chemicals used for treatment of water intended for human consumption - Liquefied ammonia | |
| Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium disulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium fluoride | |
| Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate. | |
| Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium sulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. AMMONIA SOLUTION. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. AMMONIUM SULFATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. LIQUEFIED AMMONIA. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POTASSIUM TRIPOLYPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM DISULFITE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM FLUORIDE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM HYDROGEN SULFITE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM POLYPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM SULFITE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM THIOSULFATE. | |
| Child use and care articles - Changing units for domestic use - Part 1: Safety requirements | |
| Child use and care articles - Changing units for domestic use - Part 2: Test methods | |
| COAL TAR BASED OILS. TERMINOLOGY. | |
| Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements | |
| Copper and copper alloys - Hollow rod for free machining purposes. | |
| Copper and copper alloys - Hollow rod for free machining purposes | |
| Copper and copper alloys - Profiles and bars for general purposes | |
| Copper and copper alloys - Rod for free machining purposes. | |
| Copper and copper alloys - Rod for free machining purposes | |
| Copper and copper alloys - Rod for general purposes | |
| Copper and copper alloys - Wire for general purposes | |
| Copper and copper alloys - Wrought and unwrought forging stock | |
| COPPER AND COPPER ALLOYS. HOLLOW ROD FOR FREE MACHINING PURPOSES. | |
| COPPER AND COPPER ALLOYS. PROFILES AND RECTANGULAR BAR FOR GENERAL PURPOSES. | |
| COPPER AND COPPER ALLOYS. ROD FOR FREE MACHINING PURPOSES. | |
| COPPER AND COPPER ALLOYS. ROD FOR GENERAL PURPOSES. | |
| COPPER AND COPPER ALLOYS. WIRE FOR GENERAL PURPOSES. | |
| COPPER AND COPPER ALLOYS. WROUGHT AND UNWROUGHT FORGING STOCK. | |
| CRUDE TAR AND CRUDE BENZOLE. TERMONOLOGY | |
| Cryogenic vessels - Cleanliness for cryogenic service | |
| Cryogenic vessels - Methods for performance evaluation of thermal insulation | |
| Curtain walling - Air permeability - Performance requirements and classification | |
| Curtain walling - Air permeability - Test method. | |
| Curtain walling - Air permeability - Test method | |
| Curtain walling - Resistance to wind load - Test method. | |
| Curtain walling - Watertightness - Laboratory test under static pressure. | |
| Curtain walling - Watertightness - Performance requirements and classification | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 2: Long term test | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test | |
| DIRECT GAS-FIRED WASHING MACHINES OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW. PART 2: RATIONAL USE OF ENERGY. | |
| DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW. PART 1: SAFETY. | |
| DOORS - CLIMATIC INFLUENCES - REQUIREMENTS AND CLASSIFICATION. | |
| Doors - Climatic influences - Requirements and classification | |
| Doors - Operating forces - Requirements and classification | |
| Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods | |
| ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS. REQUIREMENTS AND TEST METHODS. | |
| Equipping of Liquefied Petroleum Gas (LPG) road tankers. | |
| Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test | |
| Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test | |
| Feather and down - Test methods - Determination of the fill power (massic volume) (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME) | |
| Feather and down - Test methods - Determination of the quantitative composition of feather and down (manual method) (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE QUANTITATIVE COMPOSITION OF FEATHER AND DOWN (MANUAL METHOD) | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 12: Pumps | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 13: ESFR sprinklers | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 15: Spray pattern sprinklers with a k-factor of at least K160, extended coverage sprinklers of at least... | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers (Endorsed by AENOR in September of 2006.) | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge alarm valves | |
| Fixed firefighting systems components for sprinkler and waterspray systems - Part 1: Sprinklers | |
| FIXED FIREFIGHTING SYSTEMS. COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS. PART 1: SPRINKLERS. | |
| Fixed firefighting sytems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies. | |
| Food processing machinery - Band saw machines - Safety and hygiene requirements | |
| Food processing machinery - Circular saw machines - Safety and hygiene requirements | |
| Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements | |
| FOOTWEAR. STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING OF FOOTWEAR AND COMPONENTS FOR FOOTWEAR. | |
| Fruit and vegetable juices - Determination of centrifugable pulp content | |
| Fruit and vegetable juices - Determination of chloride content - Potentiometric titration method | |
| Fruit and vegetable juices - Determination of hesperidin and naringin in citrus juices - Method using high performance liquid chromatography | |
| Fruit and vegetable juices - Determination of nitrogen content - Kjeldahl method | |
| Fruit and vegetable juices - Determination of tartaric acid in grape juices - Method by high performance liquid chromatography | |
| Fruit and vegetable juices - Determination of titrable acidity | |
| Fruit and vegetable juices - Determination of total alkalinity of ash - Titrimetric method | |
| Fruit and vegetable juices - Determination of total carotenoid content and individual carotenoid fractions | |
| Fruit and vegetable juices - Determination of total dry matter - Gravimetric method with loss of mass on drying | |
| Fruit and vegetable juices - Enzymatic determination of D-malic acid content - NAD spectrometric method | |
| Fruit and vegetable juices - Enzymatic determination of sucrose content - NADP spectrometric method | |
| Fruit and vegetable juices - Estimation of soluble solids content - Refractometric method | |
| Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements | |
| Gas meters - Turbine gas meters | |
| Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements | |
| Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements | |
| GAS SUPPLY SYSTEMS. GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION. FUNCTIONAL REQUIREMENTS. | |
| Gas supply systems. Gas pressure regulating-installat ions on service lines. Functional requirements. | |
| GENERIC SPECIFICATION: PRINTED BOARDS. (Endorsed by AENOR in June of 1996.) | |
| GENERIC SPECIFICATION: PRINTED BOARDS. (Endorsed by AENOR in June of 1998.) | |
| Geosynthetics - General tests for evaluation following durability testing | |
| Geosynthetics - Method for determining the microbiological resistance by a soil burial test | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST. | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description. | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Gymnastic equipment - Horizontal bars - Safety requirements and test methods | |
| Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods. | |
| Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods | |
| GYMNASTIC EQUIPMENT. HORSES AND BUCKS. FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| Health informatics - Categorial structures for systems of concepts | |
| Health informatics - Secure User Identification for Health Care - Management and Security of Authentication by Passwords | |
| Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance. | |
| Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance | |
| Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator | |
| Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator | |
| In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials. | |
| IN VITRO DIAGNOSTIC MEDICAL DEVICES. MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN. PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES. | |
| Industrial valves - Copper alloy gate valves | |
| Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements | |
| Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements | |
| Industrial valves. Copper alloy gate valves | |
| Industrial valves. Testing of valves. Part 1: Pressure tests, test procedures and acceptance criteria. Mandatory requirements. | |
| Industrial valves. Testing of valves. Part 2: Tests, test procedures and acceptance criteria. Supplementary requirements. | |
| Light and lighting - Sports lighting | |
| LIGHT AND LIGHTING. SPORTS LIGHTING | |
| Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography. | |
| Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography | |
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing. | |
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing | |
| Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces | |
| Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres | |
| Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains | |
| Load restraint assemblies on road vehicles. Safety. Part 1: Calculation of lashing forces. | |
| Load restraint assemblies on road vehicles. Safety. Part 4: Lashing steel wire ropes | |
| LPG equipment and accessories - Equipping of LPG road tankers (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Equipping of LPG road tankers | |
| Machinery and plants for the preparation of concrete and mortar - Safety requirements | |
| Manual wheelchairs - Requirements and test methods | |
| MANUALLY PROPELLED WHEELCHAIRS. REQUIREMENTS AND TEST METHODS. | |
| MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR WATER ABSORPTION OF CERAMIC ARTICLES (Endorsed by AENOR in December of 1997.) | |
| Montaineering equipment - Pulleys - Safety requirements and test methods | |
| Mountaineering equipment - Chocks - Safety requirements and test methods | |
| Mountaineering equipment - Connectors - Safety requirements and test methods | |
| Mountaineering equipment - Frictional anchors - Safety requirements and test methods | |
| Mountaineering equipment - Harnesses - Safety requirements and test methods | |
| MOUNTAINEERING EQUIPMENT. CONNECTORS. SAFETY REQUIREMENTS AND TEST METHODS | |
| Mountaineering equipment. Frictional anchors. Safety requirements and test methods | |
| MOUNTAINEERING EQUIPMENT. HARNESSES. SAFETY REQUIREMENTS AND TEST METHODS. | |
| MOUNTAINEERING EQUIPMENT. PULLEYS. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Non-active surgical implants. Body contouring implants. Specific requirements for mammary implants. | |
| NON-DESTRUCTIVE TESTING. ULTRASONIC EXAMINATION. SPECIFICATION FOR CALIBRATION BLOCK Nº 1 | |
| OROPHARYNGEAL AIRWAYS. | |
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder | |
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder | |
| Paper and board intended for contact with foodstuffs - Sensory analysis - Part 1: Odour. | |
| Paper and board intended for contact with foodstuffs - Sensory analysis - Part 2: Off- flavour (taint). | |
| Paper and board intended for contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint). | |
| Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour | |
| Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) | |
| PETROLEUM PRODUCTS. DETERMINATION OF REID VAPOUR PRESSURE. WET METHOD. | |
| Plastics and rubber machines - Calenders - Safety requirements | |
| Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum | |
| PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS | |
| Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling | |
| Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves. | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General (Endorsed by Asociación Española de Normalización in March of 2024.)... | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system | |
| Plastics piping systems for water supply-Polyethylene (PE)-Part 1: General. | |
| PLASTICS PIPING SYSTEMS. DETERMINATION OF MOISTURE CONTENT IN THERMOPLASTICS BY COULOMETRY. | |
| PLASTICS PIPING SYSTEMS. FITTINGS, VALVES AND ANCILLARIES. DETERMINATION OF GASEOUS FLOW RATE/PRESSURE DROP RELATIONSHIPS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. TEST METHODS TO PROVE THE LEAKTIGHTNESS OF THE WALL UNDER SHORT-TERM INTERNAL PRESSURE. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER WET CONDITIONS AND CALCULATION OF THE LONG-TERM SPECIFIC RING STIFFNESS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE LONG-TERM ULTIMATE RELATIVE RING DEFLECTION UNDER WET CONDITIONS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD TO PROVE THE RESISTANCE TO INITIAL RING DEFLECTION. | |
| PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING. | |
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system | |
| Playpens for domestic use - Safety requirements and test methods | |
| PLAYPENS FOR DOMESTIC USE. PART 1: SAFETY REQUIREMENTS | |
| PLAYPENS FOR DOMESTIC USE. PART 2: TEST METHODS | |
| Printing and business paper - Determination of toner adhesion. | |
| Printing and business paper - Requirements for copy paper for dry toner imaging processes. | |
| Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar | |
| Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time | |
| Quality classification of timber used in pallets and packaging | |
| Rail systems for supporting medical equipment. | |
| RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT | |
| Railway applications - Ride comfort for passengers - Measurement and evaluation | |
| Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking | |
| Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests | |
| REFRIGERATING SYSTEMS AND HEAT PUMPS. LIQUID LEVEL INDICATING DEVICES. REQUIREMENTS, TESTING AND MARKING | |
| REFRIGERATING SYSTEMS AND HEAT PUMPS. VALVES. REQUIREMENTS, TESTING AND MARKING | |
| Residential liquid fuel burning appliances - Part 2: Flued oil stoves with vaporizing burners | |
| Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings | |
| RESILIENT FLOOR COVERINGS. SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS. | |
| Road transport and traffic telematics - Dedicated short-range communication - Physical layer using microwave at 5,8 GHz | |
| Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions | |
| Rotodynamic pumps - Technical documents - Terms, delivery range, layout | |
| RUBBER AND PLASTICS MACHINES. CALENDERS. SAFETY REQUIREMENTS. | |
| RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION | |
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering | |
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing | |
| Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles. | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure. | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening. | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening | |
| SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE | |
| Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains | |
| Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers. | |
| Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers | |
| Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) | |
| Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain | |
| Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain | |
| Sawn timber used in industrial packaging - Permitted deviations and preferential sizes | |
| Sawn timber used in pallets - Permitted deviations and guidelines for dimensions | |
| Screens for laser working places - Safety requirements and testing. | |
| Screens for laser working places - Safety requirements and testing | |
| SCREENS FOR LASER WORKING PLACES. SAFETY REQUIREMENTS AND TESTING | |
| Sectional Specification: Radio frequency coaxial connectors - Series BNC | |
| Sectional Specification: Radio frequency coaxial connectors - Series EIA flange | |
| Sectional Specification: Radio frequency coaxial connectors - Series MMCX (Endorsed by AENOR in July of 2002.) | |
| Sectional Specification: Radio frequency coaxial connectors - Series SMA | |
| Sectional Specification: Radio frequency coaxial connectors - Series SMB | |
| Sectional Specification: Radio frequency coaxial connectors - Series SMC | |
| Sectional Specification: Radio frequency coaxial connectors - Series SSMA | |
| Sectional Specification: Radio frequency coaxial connectors - Series SSMB | |
| Sectional Specification: Radio frequency coaxial connectors - Series SSMC | |
| SHUTTERS, EXTERNAL AND INTERNAL BLINDS. MISUSE. TEST METHODS. | |
| Shutters, external blinds, internal blinds - Terminology, glossary and definitions. | |
| Shutters, external blinds, internal blinds - Terminology, glossary and definitions | |
| Slurry surfacing - Requirements | |
| Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance | |
| Slurry surfacing - Test method - Part 5: Determination of wearing. | |
| Slurry surfacing - Test methods - Part 1: Sampling for binder extraction. | |
| Slurry surfacing - Test methods - Part 1: Sampling of slurry surfacing mixture | |
| Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples | |
| Slurry surfacing - Test methods - Part 2: Determination of residual binder content | |
| Slurry surfacing - Test methods - Part 3: Consistency. | |
| Slurry surfacing - Test methods - Part 3: Consistency | |
| Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix | |
| Slurry surfacing - Test methods - Part 6: Rate of application. | |
| Slurry surfacing - Test methods - Part 6: Rate of application | |
| Slurry surfacing - Test methods - Part 7: Shaking abrasion test | |
| Slurry surfacing - Test methods - Part 8: Visual assessment of defects | |
| SOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS | |
| SS: RADIO FREQUENCY COAXIAL CONNECTORS. SERIES 7-16. (Endorsed by AENOR in September of 1996.) | |
| SS: RADIO FREQUENCY COAXIAL CONNECTORS. SERIES TNC. (Endorsed by AENOR in September of 1996.) | |
| SURFACE ACTIVE AGENTS - DETERMINATION OF THE TOTAL POLYETHYLENE GLYCOL CONTENT OF NON-IONIC SURFACE ACTIVE AGENTS (EO ADDUCTS) BY HPLC/GPC | |
| Surface dressing - Requirements | |
| Surface dressing - Specifications - Part 3: Rate of spread and accuracy of spread of binders and chippings. | |
| Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings. | |
| Surface dressing - Test methods - Part 2: Visual assessment of defects | |
| Surface dressing - Test methods - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method | |
| Surfaces for sports areas - Determination of ball roll behaviour. | |
| Surfaces for sports areas - Determination of ball roll behaviour | |
| Surfaces for sports areas - Determination of joint strength of synthetic surfaces. | |
| Surfaces for sports areas - Determination of joint strength of synthetic surfaces | |
| Surfaces for sports areas - Determination of sward height of natural turf | |
| Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces | |
| Surfaces for sports areas - Determination of thatch depth of natural turf | |
| Surfaces for sports areas - Determination of vertical ball behaviour | |
| Surfaces for sports areas - Method of test - Determination of ground cover of natural turf | |
| Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces | |
| Surfaces for sports areas - Test Method for the determination of tensile properties of synthetic sports surfaces | |
| SURFACES FOR SPORTS AREAS. PROCEDURE FOR THE PREPARATION OF SYNTHETIC TURF AND TEXTILE TEST PIECES. | |
| TECHNICAL AIDS FOR DISABLED PERSONS. GENERAL REQUIREMENTS AND TEST METHODS. | |
| TEXTILES. FABRICS. DETERMINATION OF MASS PER UNIT AREA USING SMALL SAMPLES. | |
| THERMAL PERFORMANCE OF BUILDINGS. AIR PERMEABILITY OF BUILDING COMPONENTS AND BUILDING ELEMENTS. LABORATORY TEST METHOD | |
| TOUCH AND CLOSE FASTENERS - DETERMINATION OF PEEL STRENGTH | |
| Touch and close fasteners - Method for closure prior to washing and drying or dry cleaning | |
| Touch and close fasteners. Determination of dimensional change in washing and drying and dry cleaning. | |
| TOUCH AND CLOSE FASTENERS. DETERMINATION OF THE OVERALL AND EFFECTIVE WIDTHS OF TAPES AND THE EFFECTIVE WIDTH OF A CLOSURE. | |
| Transportable gas cylinders - Fully wrapped composite cylinders | |
| Transportable gas cylinders - Non-refillable metallic gas cylinders | |
| Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders. | |
| Transportable gas cylinders. Fully wrapped composite cylinders. | |
| Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements | |
| Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications | |
| Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application | |
| Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation | |
| Ventilation for buildings - Ductwork hangers and supports - Requirements for strength | |
| Ventilation for buildings. Ductwork. Strenght and leakage of circular sheet metal ducts. | |
| WALLCOVERINGS IN ROLL FORM. DETERMINATION OF MIGRATION OF HEAVY METALS AND CERTAIN OTHER ELEMENTS, OF VINYL CHLORIDE MONOMER AND OF FORMALDEHYDE RELEASE. | |
| Wastewater treatment plants - Part 10: Safety principles | |
| Wastewater treatment plants - Part 11: General data required | |
| Wastewater treatment plants - Part 12: Control and automation. | |
| Wastewater treatment plants - Part 12: Control and automation | |
| Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/floccu lation | |
| Wastewater treatment plants - Part 14: Disinfection | |
| Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants | |
| Wastewater treatment plants - Part 16: Physical (mechanical) filtration | |
| Wastewater treatment plants - Part 1: General construction principles. | |
| Wastewater treatment plants - Part 1: General design and construction principles | |
| Wastewater treatment plants - Part 3: Preliminary treatment | |
| Wastewater treatment plants - Part 4: Primary settlement. | |
| Wastewater treatment plants - Part 4: Primary treatment | |
| Wastewater treatment plants - Part 5: Lagooning processes | |
| Wastewater treatment plants - Part 6: Activated sludge process | |
| Wastewater treatment plants - Part 7: Biological fixed-film reactors. | |
| Wastewater treatment plants - Part 8: Sludge treatment and storage | |
| Wastewater treatment plants - Part 9: Odour control and ventilation. | |
| Wastewater treatment plants - Part 9: Odour control and ventilation | |
| Wastewater treatment plants. Part 16: Physical (mechanical) filtration | |
| WASTEWATER TREATMENT PLANTS. PART 8: SLUDGE TREATMENT AND STORAGE. | |
| Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides | |
| Windows and doors - Air permeability - Classification | |
| Windows and doors - Resistance to wind load - Classification. | |
| Windows and doors - Resistance to wind load - Classification | |
| Windows and doors - Resistance to wind load - Test method | |
| Windows and doors - Watertightness - Classification | |
| WINDOWS AND DOORS. RESISTANCE TO WIND LOAD. TEST METHOD. | |
| Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids | |
| Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating... | |
| Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling... | |
| Workshop fabricated steel tanks. Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| << Prev | Next >> |