AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ADHESIVES - DETERMINATION OF ACID VALUE | |
| ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES | |
| Adhesives - Determination of hydroxyl value and/or hydroxyl content | |
| ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT | |
| ADHESIVES - DETERMINATION OF PH - TEST METHOD | |
| Adhesives - Determination of pH | |
| Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light | |
| ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) | |
| Adhesives - Freeze-thaw stability | |
| Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements. | |
| ADHESIVES. DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT. | |
| ADHESIVES. FREEZE-THAW STABILITY. | |
| Aicraft ground support equipment. Specific requirements. Part 2: Catering vehicles (Endorsed by AENOR in November of 2002.) | |
| AIDC technologies - Symbology specifications - Code 16K (Endorsed by AENOR in March of 2006.) | |
| Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity. | |
| AIR QUALITY - DETERMINATION OF THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER - REFERENCE METHOD AND FIELD TEST PROCEDURE TO DEMONSTRATE REFERENCE EQUIVALENCE OF MEASUREMENT METHODS | |
| Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers (Endorsed by AENOR in May of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment | |
| Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment | |
| Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitat ed passenger boarding vehicles (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitat ed passenger boarding vehicles (Endorsed by AENOR in March of 2007.) | |
| Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitat ed passenger boarding vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by AENOR in February of 2006.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment (Endorsed by AENOR in October of 2004.) | |
| Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units (Endorsed by AENOR in June of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions (Endorsed by AENOR in June of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs. | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | |
| Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles (Endorsed by AENOR in June of 2003.) | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges (Endorsed by AENOR in June of 2003.) | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (Endorsed by AENOR in April of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (Endorsed by Asociación Española de Normalización in March of 2025.) | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | |
| Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment | |
| Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment (Endorsed by AENOR in July of 2004.) | |
| Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment | |
| Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms (Endorsed by AENOR in July of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders (Endorsed by AENOR in June of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders | |
| Aircraft ground support equipment. Specific requirements. Part 12: Potable water service equipment (Endorsed by AENOR in November of 2002.) | |
| Aircraft ground support equipment. Specific requirements. Part 13: Lavatory service equipment (Endorsed by AENOR in November of 2002.) | |
| Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments. | |
| Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation. | |
| ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 17: DETERMINATION OF ELECTRIC BREAKDOWN POTENTIAL.. | |
| Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 10: MEASUREMENT OF MEAN SPECIFIC ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS USING AN ABRASIVE JET TEST APPARATUS. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 11: MEASUREMENT OF SPECULAR REFLECTANCE AND SPECULAR GLOSS OF ANODIC OXIDATION COATINGS AT ANGLES OF 20º, 45º, 60º OR 85º. | |
| Aluminium and aluminium alloys. Anodizing. Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer. | |
| Aluminium and aluminium alloys. Anodizing. Part 14: Visual determination of image clarity of anodic oxidation coatings. Chart scale method. | |
| Aluminium and aluminium alloys. Anodizing. Part 16: Check for continuity of thin anodic oxidation coatings. Copper sulfate test. | |
| Aluminium and aluminium alloys. Anodizing. Part 18: Rating systems for the evaluation of pitting corrosion. Chart method. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 19: RATING SYSTEM FOR THE EVALUATION OF PITTING CORROSION. GRID METHOD. | |
| Aluminium and aluminium alloys. Anodizing. Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 2: DETERMINATION OF MASS PER UNIT AREA (SURFACE DENSITY) OF ANODIC OXIDATION COATINGS - GRAVIMETRIC METHOD. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 3: DETERMINATION OF THICKNESS OF ANODIC OXIDATION COATINGS -NON-DESTRUCTIVE MEASUREMENT BY SPLIT-BEAM MICROSCOPE. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 4: ESTIMATION OF LOSS OF ABSORPTIVE POWER OF ANODIC OXIDATION COATINGS AFTER SEALING BY DYE SPOT TEST WITH PRIOR ACID TREATMENT. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 5: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 6: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF THE LOSS OF MASS AFTER IMMERSION IN PHOSPHORIC ACID/CHROMIC ACID SOLUTION WITHOUT... | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 7: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF THE LOSS OF MASS AFTER IMMERSION IN PHOSPHORIC ACID/CHROMIC ACID SOLUTION WITH... | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 8: DETERMINATION OF THE COMPARATIVE FASTNESS TO ULTRA-VIOLET LIGHT AND HEAT OF COLOURED ANODIC OXIDATION COATINGS. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 9: MEASUREMENT OF WEAR RESISTANCE AND WEAR INDEX OF ANODIC OXIDATION COATINGS USING AN ABRASIVE WHEEL WEAR TEST APPARATUS. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT PRODUCTS. SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT. | |
| Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter | |
| Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1: Analysis and management of risk. | |
| Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling | |
| Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 3: validation of the elimination and/or inactivation of viruses and transmissible agents | |
| BAR CODING - STRUCTURED DATA FILES | |
| BAR CODING. SYMBOLOGY SPECIFICATIONS. "CODE 16K". | |
| Biotechnology - Performance criteria for steam sterilizers and autoclaves | |
| BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS | |
| Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment | |
| BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE ELEMENTS. PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS. | |
| BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE ELEMENTS. PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND. | |
| BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS. | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 5: Sounds levels due to the service equipment | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces | |
| BUILDING ACOUSTICS. ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM PERFORMANCE OF ELEMENTS. PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE. | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method | |
| Building hardware - Padlocks and padlock fittings - Requirements and test methods | |
| BUILDING HARDWARE. PADLOCKS AND PADLOCK FITTINGS. REQUIREMENTS AND TEST METHODS. | |
| Capability Detail Specification: Flexible printed boards without through connections | |
| CAPDS: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS. (Endorsed by AENOR in September of 1996.) | |
| CAPDS: MULTILAYER PRINTED BOARDS. (Endorsed by AENOR in September of 1996.) | |
| CAPDS: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES. (Endorsed by AENOR in September of 1996.) | |
| CAPDS: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES. (Endorsed by AENOR in September of 1996.) | |
| Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity | |
| Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, mycobactericidal, sporicidal and fungicidal activity | |
| CHEMICAL DISINFECTANTS AND ANTISEPTICS. PRESERVATION OF MICROBIAL STRAINS USED FOR THE DETERMINATION OF BACTERICIDAL AND FUNGICIDAL ACTIVITY. | |
| Chemicals used for treatment of water intended for human consumption - Copper sulfate | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. COPPER SULFATE. | |
| Chimneys - Components - Concrete outer wall elements | |
| Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances | |
| Chimneys. Components. Concrete outer wall elements. | |
| Copper and copper alloys - Determination of spring bending limit on strip | |
| Copper and copper alloys - Forgings | |
| Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers | |
| Copper and copper alloys - Seamless, round copper capillary tubes | |
| Copper and copper alloys - Seamless, round tubes for general purposes | |
| Copper and copper alloys - Seamless, round tubes for heat exchangers | |
| COPPER AND COPPER ALLOYS. FORGINGS | |
| COPPER AND COPPER ALLOYS. ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS. | |
| COPPER AND COPPER ALLOYS. SEAMLESS, ROUND COPPER CAPILLARY TUBES. | |
| COPPER AND COPPER ALLOYS. SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES. | |
| COPPER AND COPPER ALLOYS. SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS. | |
| Core drilling machines on stand - Safety | |
| CORE DRILLING MACHINES ON STAND. SAFETY. | |
| CORROSION PROTECTION OF METALS. ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL. | |
| Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary tratment on iron or steel. | |
| Cryogenic vessels - Cryogenic flexible hoses. | |
| Durability of wood and wood-based products - Assessment of the effectiveness of masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray -... | |
| Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified) | |
| Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified) | |
| Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components | |
| Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance. | |
| Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance | |
| Fixed firefighting systems. Powder systems. Part 1: Requirements and test methods for components. | |
| Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of resistance to tearing (nail shank) - Part 1: Bitumen sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) | |
| Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (Endorsed by Asociación Española de Normalización in October of 2022.) | |
| Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements | |
| Food processing machinery - Mincing machines - Safety and hygiene requirements | |
| Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 1: General considerations | |
| Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 2: Methods for extraction and clean-up | |
| Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 3: Determination and confirmatory tests | |
| Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 1: General considerations | |
| Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and cleanup | |
| Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests | |
| Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements | |
| FOUNDING. VISUAL EXAMINATION OF SURFACE DISCONTINUITIES. STEELS AND CASTINGS. | |
| Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements | |
| Gas meters - Conversion devices - Part 1: Volume conversion | |
| Gas meters - Conversion devices - Part 2: Energy conversion | |
| Gas meters - Conversion devices - Part 3: Flow computer | |
| Gas meters. Gas-volume electronic conversion devices | |
| GAS SUPPLY SYSTEMS. PRESSURE TESTING, COMMISSIONING AND DECOMMISSIONING PROCEDURES. FUNCTIONAL REQUIREMENTS. | |
| GAS-FIRED ABSORPTION AND ADSORPTION AIR-CONDITIONING AND/OR HEAT PUMP APPLIANCES WITH A NET HEAT INPUT NOT EXCEEDING 70 KW. PART 1: SAFETY | |
| GAS-FIRED ABSORPTION AND ADSORPTION AIR-CONDITIONING AND/OR HEAT PUMP APPLIANCES WITH A NET HEAT INPUT NOT EXCEEDING 70 KW. PART 2: RATIONAL USE OF ENERGY | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Test conditions | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 4: Test methods | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 5: Requirements | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Specific provisions for hybrid appliances | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water. | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water | |
| Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| GLASS IN BUILDING. CHEMICALLY STRENGTHENED SODA LIME SILICATE GLASS. PART 1: DEFINITION AND DESCRIPTION. | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials | |
| GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS. DESIGN REQUIREMENTS, TYPE TESTING, MARKING, QUALITY CONTROL. | |
| Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods | |
| GYMNASTIC EQUIPMENT. WALL BARS, LATTICE LADDERS AND CLIMBING FRAMES. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Health informatics - Expression of results of measurements in health sciences | |
| Health informatics - Time standards for healthcare specific problems | |
| In vitro diagnostic medical devices - Culture media for microbiology - Performance criteria for culture media | |
| In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media. | |
| IN VITRO DIAGNOSTIC MEDICAL DEVICES. INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY. | |
| Industrial valves - Cast iron check valves. | |
| Industrial valves - Protective caps for valves with flanged connections | |
| INDUSTRIAL VALVES. CAST IRON CHECK VALVES. | |
| Industrial valves. Cast iron check valves | |
| INDUSTRIAL VALVES. PROTECTIVE CAPS FOR VALVES WITH FLANGED CONNECTIONS | |
| Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation | |
| Industrial, commercial and garage doors and gates - Air permeability - Test method | |
| Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification | |
| Industrial, commercial and garage doors and gates - Resistance to wind load - Classification | |
| Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods | |
| Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors | |
| Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. AIR PERMEABILITY. CLASSIFICATION. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. RESISTANCE TO WIND LOAD. TESTING AND CALCULATION. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. SAFETY IN USE OF POWER OPERATED DOORS. REQUIREMENTS. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. SAFETY IN USE OF POWER OPERATED DOORS. TEST METHODS. | |
| Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation. | |
| Inland navigation vessels - Rope tubs | |
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping | |
| Irrigation techniques - Centre pivot and moving lateral systems - Part 1: Presentation of the technical characteristics | |
| Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimum performances and technical characteristics | |
| Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminology and classification | |
| Irrigation techniques - Reel machine systems - Part 1: Size series | |
| Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines | |
| Irrigation techniques - Reel machine systems - Part 3: Presentation of technical characteristics | |
| Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements | |
| LEAD AND LEAD ALLOYS. METHODS OF SAMPLING FOR ANALYSIS | |
| Machine tools - Safety - Machining centres | |
| MACHINE TOOLS. SAFETY. MACHINING CENTRES. | |
| Magnesium and magnesium alloys - Magnesium alloys for cast anodes | |
| Magnesium and magnesium alloys - Unalloyed magnesium | |
| Masonry and stone cutting-off machines for job site - Safety | |
| MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE. SAFETY. | |
| Natural stone - Denomination criteria. | |
| Natural stone - Denomination criteria | |
| Natural stone test methods - Determination of flexural strength under concentrated load. | |
| Natural stone test methods - Determination of flexural strength under concentrated load | |
| Natural stone test methods - Determination of frost resistance | |
| Natural stone test methods - Determination of resistance to salt crystallisation | |
| Natural stone test methods - Petrographic examination | |
| NATURAL STONE TEST METHODS. DETERMINATION OF FLEXURAL STRENGTH UNDER CONCENTRATED LOAD | |
| Natural stone test methods. Determination of frost resistance. | |
| Natural stone test methods. Petrographic examination. | |
| NON-FATTY FOOD - MULTIRESIDUE METHODS FOR THE GAS CHROMATOGRAPHIC DETERMINATION OF PESTICIDE RESIDUES - PART 2: METHODS FOR EXTRACTION AND CLEAN UP. | |
| NON-FATTY FOOD. MULTIRESIDUE METHODS FOR THE GAS CHROMATOGRAPHIC DETERMINATION OF PESTICIDE RESIDUES. PART 1: GENERAL CONSIDERATIONS | |
| NON-FATTY FOODS - DETERMINATION OF DITHIOCARBAMATE AND THIURAM DISULFIDE RESIDUES - PART 1: SPECTROMETRIC METHOD | |
| NON-FATTY FOODS - DETERMINATION OF DITHIOCARBAMATE AND THIURAM DISULFIDE RESIDUES - PART 2: GAS CHROMATOGRAPHIC METHOD | |
| NON-FATTY FOODS - MULTIRESIDUE METHODS FOR THE GAS CHROMATOGRAPHIC DETERMINATION OF PESTICIDE RESIDUES - PART 3: DETERMINATION AND CONFIRMATORY TESTS | |
| Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Part 3: UV spectrometric xanthogenate method. | |
| PACKAGING - FLEXIBLE ALUMINIUM TUBES - WALL THICKNESS DETERMINATION METHOD. | |
| Packaging - Flexible aluminium tubes - Wall thickness determination method | |
| PACKAGING - FLEXIBLE TUBES - TERMINOLOGY | |
| Packaging - Flexible tubes - Test method for the air tightness of closures | |
| PACKAGING - FLEXIBLE TUBES - TEST METHOD FOR THE AIRTIGHTNESS OF CLOSURES. | |
| Plastics and rubber machines - Thermoforming machines - Safety requirements | |
| Polypropylene twines | |
| RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKMENT UNDERLAY | |
| RESPIRATORY PROTECTIVE DEVICES. LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASKS. REQUIREMENTS, TESTING, MARKING. | |
| RUBBER AND PLASTICS MACHINES. THERMOFORMING MACHINES. SAFETY REQUIREMENTS | |
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 1: Steel ball method | |
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method. | |
| Safety of machine tools. Small numerically controlled turning machines and turning centres. | |
| Safety requirements for bonded abrasive products (Endorsed by AENOR in April of 2011.) | |
| Safety requirements for bonded abrasive products (Endorsed by AENOR in August of 2007.) | |
| SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS . (Endorsed by AENOR in June of 1999.) | |
| Safety requirements for bonded abrasive products | |
| Safety requirements for cableway installations designed to carry persons - Operation (Endorsed by AENOR in May of 2005.) | |
| Safety requirements for cableway installations designed to carry persons - Operation | |
| Safety requirements for cableway installations designed to carry persons - Quality assurance | |
| SECTIONAL SPECIFICACION: MULTILAYER PRINTED BOARDS. (Endorsed by AENOR in June of 1996.) | |
| Sectional Specification: Flex-rigid double sided printed board with through connections | |
| Sectional Specification: Flex-rigid multilayer printed boards with through connections | |
| SECTIONAL SPECIFICATION: FLEXIBLE MULTILAYER PRINTED BOARDS WITH THROUGH CONNECTIONS (Endorsed by AENOR in November of 1997.) | |
| SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS. (Endorsed by AENOR in November of 1996.) | |
| SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITHOUT THROUGH CONNECTIONS. (Endorsed by AENOR in June of 1996.) | |
| Sectional Specification: Multilayer printed boards | |
| SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES. (Endorsed by AENOR in June of 1996.) | |
| SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES. (Endorsed by AENOR in June of 1996.) | |
| SECTIONAL SPECIFICATION: SINGLE AND DOUBLE-SIDED PRINTED BOARDS WITH PLAIN HOLES. (Endorsed by AENOR in June of 1996.) | |
| Sisal twines | |
| Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate | |
| Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate | |
| SLATE AND STONE PRODUCTS FOR DISCONTINOUS ROOFING AND CLADDING. PART 2: METHODS OF TEST. | |
| Slate and stone products for discontinous roofing and cladding. Part 2: Methods of test | |
| Slate and stone products for discontinuous roofing and cladding - Main element - Part 2: Methods of test | |
| Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification | |
| Solid fertilizers - Test sieving (ISO 8397:1988 modified) | |
| Solid fertilizers - Test sieving | |
| SS: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS. (Endorsed by AENOR in September of 1996.) | |
| Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications | |
| Steel wire ropes - Safety - Part 1: General requirements. | |
| Steel wire ropes - Safety - Part 1: General requirements | |
| STEEL WIRE ROPES - SAFETY - PART 2: DEFINITIONS, DESIGNATION AND CLASSIFICATION | |
| Steel wire ropes - Safety - Part 3: Information for use and maintenance | |
| Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications | |
| Steel wire ropes - Safety - Part 5: Stranded ropes for lifts | |
| Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts | |
| Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons | |
| Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons | |
| Steel wire ropes. Safety. Part 10: Spiral ropes for general structural applications | |
| Steel wire ropes. Safety. Part 6: Stranded ropes for mine shafts | |
| STERILE RECTAL CATHETERS FOR SINGLE USE | |
| Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements | |
| Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements | |
| Testing fresh concrete - Part 10: Self-compacting concrete - L box test | |
| Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test | |
| Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test | |
| Testing fresh concrete - Part 1: Sampling and common apparatus | |
| Testing fresh concrete - Part 1: Sampling | |
| Testing fresh concrete - Part 2: Slump test | |
| Testing fresh concrete - Part 2: Slump-test | |
| Testing fresh concrete - Part 3: Vebe test | |
| Testing fresh concrete - Part 4: Degree of compactability | |
| Testing fresh concrete - Part 5: Flow table test | |
| Testing fresh concrete - Part 6: Density | |
| Testing fresh concrete - Part 7: Air content - Pressure methods. | |
| Testing fresh concrete - Part 7: Air content - Pressure methods | |
| Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test | |
| Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test | |
| Testing fresh concrete. Part 1: Sampling. | |
| Testing fresh concrete. Part 2: Slump test. | |
| Testing fresh concrete. Part 3: Vebe test. | |
| Testing fresh concrete. Part 4: Degree of compactability. | |
| Testing fresh concrete. Part 5: Flow table test. | |
| Testing fresh concrete. Part 6: Density. | |
| Testing hardened concrete - Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide | |
| Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| Testing hardened concrete - Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method | |
| Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression | |
| Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process | |
| Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process | |
| Testing hardened concrete - Part 16: Determination of the shrinkage of concrete | |
| Testing hardened concrete - Part 17: Determination of creep of concrete in compression | |
| Testing hardened concrete - Part 18: Determination of the chloride migration coefficient. | |
| Testing hardened concrete - Part 18: Determination of the chloride migration coefficient | |
| Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds | |
| Testing hardened concrete - Part 2: Making and curing specimens for strength tests. | |
| Testing hardened concrete - Part 2: Making and curing specimens for strength tests | |
| Testing hardened concrete - Part 3: Compressive strength of test specimens. | |
| Testing hardened concrete - Part 3: Compressive strength of test specimens | |
| Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines. | |
| Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines | |
| Testing hardened concrete - Part 5: Flexural strength of test specimens. | |
| Testing hardened concrete - Part 5: Flexural strength of test specimens | |
| Testing hardened concrete - Part 6: Tensile splitting strength of test specimens. | |
| Testing hardened concrete - Part 6: Tensile splitting strength of test specimens | |
| Testing hardened concrete - Part 7: Density of hardened concrete | |
| Testing hardened concrete - Part 8: Depth of penetration of water under pressure. | |
| Testing hardened concrete - Part 8: Depth of penetration of water under pressure | |
| Testing hardened concrete. Part 1: Shape, dimensions and other requirements for specimens and moulds. | |
| Testing hardened concrete. Part 7: Density of hardened concrete. | |
| Testing of hardened concrete - Part 19: Determination of electrical resistivity | |
| Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions | |
| Thermal insulating products for building applications - Determination of behaviour under point load | |
| Thermal insulating products for building applications - Determination of thickness for floating floor insulating products | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF BEHAVIOUR UNDER POINT LOAD. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF THICKNESS FOR FLOATING FLOOR INSULATING PRODUCTS | |
| Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames | |
| Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes | |
| Traffic control equipment - Signal heads (Endorsed by AENOR in October of 2006.) | |
| Traffic control equipment - Signal heads | |
| Traffic control equipment - Warning and safety light devices | |
| TRAFFIC CONTROL EQUIPMENT. SIGNAL HEADS. | |
| TRAFFIC CONTROL EQUIPMENT. WARNING AND SAFETY LIGHT DEVICES. | |
| Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements | |
| Underground mining machinery - Specification for the safety requirements of armoured face conveyors | |
| Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements | |
| Vehicle parking control equipment - Requirements and test methods for a parking terminal | |
| Water quality - Determination of chromium - Atomic absorption spectrometric methods | |
| WATER QUALITY. DETERMINATION OF MERCURY. ENRICHMENT METHODS BY AMALGAMATION. | |
| WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS | |
| Windows and pedestrian doors - Mechanical durability - Requirements and classification. | |
| Wood-based panels - Characteristic values for structural design - Part 2: Plywood | |
| Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels | |
| Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels | |
| WOOD-BASED PANELS. CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN. PART 1: OBS, PARTICLEBOARDS AND FIBREBOARDS. | |
| WORKPLACE ATMOSPHERES. PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AGENTS. REQUIREMENTS AND TESTS METHODS. | |
| WORKPLACE ATMOSPHERES. SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS. REQUIREMENTS AND TEST METHODS. | |
| Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method (Endorsed by AENOR in March of 2005.) | |
| Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method (Endorsed by AENOR in September of 2006.) | |
| Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method (Endorsed by AENOR in December of 2001.) | |
| Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method (Endorsed by AENOR in October of 2004.) | |
| Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method (Endorsed by AENOR in July of 2003.) | |
| Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method (Endorsed by AENOR in March of 2005.) | |
| Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method (Endorsed by AENOR in April of 2003.) | |
| Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method (Endorsed by AENOR in April of 2003.) | |
| Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method (Endorsed by AENOR in April of 2003.) | |
| Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction (Endorsed by AENOR in March of 2005.) | |
| Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method (Endorsed by AENOR in March of 2005.) | |
| Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method (Endorsed by AENOR in March of 2005.) |
| << Prev | Next >> |