AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ACOUSTICS - NOISE TEST CODE FOR FASTENER DRIVING TOOLS - ENGINEERING METHOD. | |
| Acoustics - Noise test code for fastener driving tools - Engineering method | |
| ADHESIVES - DETERMINATION OF ASH AND SULPHATED ASH | |
| Aggregates for concrete. | |
| Aggregates for concrete | |
| AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY | |
| Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock | |
| Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock | |
| Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points | |
| Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls | |
| Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds | |
| ARTIFICIAL CLIMBING STRUCTURES. PROTECTION POINTS, STABILITY REQUIREMENTS AND TEST METHODS | |
| Biotechnology - Large scale process and production - Guidance for the handling, inactivating and testing of waste | |
| Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants | |
| Biotechnology - Performance criteria for pumps | |
| BIOTECHNOLOGY. PERFORMANCE CRITERIA FOR MICROBIOLOGICAL SAFETY CABINETS. | |
| Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary | |
| Bitumen and bituminous binders - Determination of kinematic viscosity | |
| Bitumen and bituminous binders - Determination of solubility | |
| Bitumen and bituminous binders - Determination of the Fraass breaking point | |
| Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation | |
| Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1: RTFOT method | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 2: TFOT Method. | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3: RFT Method | |
| Bitumen and bituminous binders - Preparation of test samples | |
| Bitumen and bituminous binders - Specifications for paving grade bitumens | |
| Bitumen and bituminous binders - Terminology | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF DYNAMIC VISCOSITY BY VACUUM CAPILLARY | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF KINEMATIC VISCOSITY | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF SOLUBILITY | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE FRAASS BREAKING POINT. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE PARAFIN WAS CONTENT. PART 2: METHOD BY EXTRACTION. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE PARAFIN WAX CONTENT. PART 1: METHOD BY DISTILLATION. | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR. PART 1: RTFOT METHOD | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR. PART 2: TFOT METHOD | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR. PART 3: RFT METHOD | |
| BITUMEN AND BITUMINOUS BINDERS. PREPARATION OF TEST SAMPLES. | |
| BITUMEN AND BITUMINOUS BINDERS. SPECIFICATIONS FOR PAVING GRADE BITUMENS. | |
| BITUMEN AND BITUMINOUS BINDERS. TERMINOLOGY. | |
| Bitumens and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method | |
| Bitumens and bituminous binders - Preparation of test samples | |
| Bitumens and bituminous binders - Terminology | |
| Blank Detail Specification: Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers | |
| BUILDING MATERIALS AND PRODUCTS. HYGROTHERMAL PROPERTIES. TABULATED DESIGN VALUES | |
| Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) | |
| Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) | |
| Castors and wheels - Castors and wheels for manually propelled institutional applications | |
| Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements | |
| CASTORS AND WHEELS - CASTORS FOR FURNITURE - REQUIREMENTS | |
| Castors and wheels - Hospital Bed Castors | |
| CASTORS AND WHEELS - TEST METHODS AND APPARATUS | |
| CASTORS AND WHEELS - VOCABULARY, RECOMMENDED SYMBOLS AND MULTILINGUAL DICTIONARY | |
| CATHODIC PROTECTION FOR FIXED STEEL OFFSHORE STRUCTURES. | |
| Cathodic protection of submarine pipelines. | |
| CENTRIFUGES - COMMON SAFETY REQUIREMENTS | |
| Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of... | |
| Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of... | |
| Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of... | |
| Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of... | |
| Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn... | |
| Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for... | |
| Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods. | |
| Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide and calcium magnesium carbonate - Test methods | |
| Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods | |
| Chemicals used for treatment of water intended for human consumption - High-calcium lime | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. HIGH-CALCIUM LIME. | |
| Child care articles - Soother holder - Safety requirements and test methods. | |
| CHILD CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS | |
| Child care articles. Soother holders. Safety requirements and test methods. | |
| Child use and care articles - Soother holder - Safety requirements and test methods | |
| CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 4: SPECIAL PRODUCTS | |
| CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS. PART 1: ALUMINA-SILICA PRODUCTS. | |
| CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS. PART 2: BASIC PRODUCTS CONTAINING LESS THAN 7% RESIDUAL CARBON. | |
| CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS. PART 3: BASIC PRODUCTS CONTAINING FROM 7% TO 30% RESIDUAL CARBON. | |
| Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device | |
| Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers. | |
| Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers | |
| Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device | |
| Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement. | |
| Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement | |
| Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) | |
| CLINICAL THERMOMETERS. PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE. | |
| CLINICAL THERMOMETERS. PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE | |
| Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements | |
| Components for supply systems for consuming units with liquid fuels | |
| Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes | |
| Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information | |
| Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes | |
| Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes | |
| Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends | |
| Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings | |
| Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes | |
| Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends | |
| Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes | |
| Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes | |
| Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes | |
| Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes | |
| COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 1: FITTINGS WITH ENDs for capillary soldering or capillary brazing to copper tubes. | |
| COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2: FITTINGS WITH COMpression ends for use with copper tubes. | |
| COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTIC PIPES. | |
| COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4: FITTINGS COMBININg other end connections with capillary or compression ends. | |
| COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5: FITTINGS WITH SHOrt ends for capillary brazing to copper tubes. | |
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys. | |
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys | |
| CORROSION PROTECTION OF METALS AND ALLOYS. SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS. VOCABULARY. | |
| CORROSION PROTECTION OF METALS. ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM. | |
| Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C | |
| Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements. | |
| Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Part 1: Fundamental requirements. | |
| Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Part 2: Design, fabrication, inspection and testing. | |
| DIVING ACCESORIES - COMBINED BUOYANCY AND RESCUE DEVICES - FUNCIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods | |
| DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD | |
| EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES. REQUIREMENTS AND TEST METHODS. | |
| Fibre cement flat sheets - Product specification and test methods | |
| Fibre ropes for general service - Hemp | |
| Fibre-cement flat sheets - Product specification and test methods | |
| Fibre-cement flat sheets - Product specifications and test methods. | |
| Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices | |
| FLAME SUPERVISION DEVICES FOR GAS BURNING APPLIANCES. THERMO-ELECTRIC FLAME SUPERVISION DEVICES. | |
| FLAME SUPERVISION DEVICES FOR GAS-BURNING APPLIANCES. THERMO-ELECTRIC TYPES. | |
| Flanger and their joints. Gaskets for Class-designated flanges. Part 7: Covered metal jacketed gaskets for use with steel flanges | |
| Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts | |
| Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges | |
| Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges | |
| Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts. | |
| FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 3: NON-METALLIC PTFE ENVELOPE GASKETS. | |
| Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges | |
| Flanges and their joints. Gaskets for Class-designated flanges. Part 2: Spiral wound gaskets for use with steel flanges. | |
| Flanges and their joints. Gaskets for class-designated flanges. Part 6: Covered serrated metal gaskets for use with steel flanges | |
| Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements | |
| Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements (Endorsed by AENOR in December of 2014.) | |
| Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements | |
| Food processing machinery - Filling machines and interchangeable equipment - Safety and hygiene requirements (Endorsed by Asociación Española de Normalización in February of 2021.) | |
| FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS | |
| Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts | |
| FOOT AND LEG PROTECTORS. REQUIREMENTS AND TEST METHODS FOR TOECAPS AND METAL PENETRATION RESISTANT INSERTS. | |
| Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements | |
| FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURTING MACHINES. NOISE TEST CODE. COMMON REQUIREMENTS | |
| Founding - Abrasion resistant cast irons | |
| FOUNDING. ABRASION RESISTANT CAST IRONS. | |
| Foundry Machinery - Safety requirements for abrasive blasting equipment. | |
| Foundry machinery - Safety requirements for abrasive blasting equipment | |
| Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines | |
| Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines | |
| Furniture - Safety, strength and durability - Requirements for domestic seating | |
| Furniture - Safety, strength and durability - Requirements for domestic tables | |
| Furniture - Strength, durability and safety - Requirements for domestic seating | |
| Furniture - Strength, durability and safety - Requirements for domestic tables | |
| FURNITURE REMOVAL ACTIVITIES - FURNITURE REMOVAL FOR PRIVATE INDIVIDUALS - PART 1: SERVICE SPECIFICATION | |
| FURNITURE REMOVAL ACTIVITIES - FURNITURE REMOVAL FOR PRIVATE INDIVIDUALS - PART 2: PROVISION OF SERVICE. | |
| Furniture removal activities - Furniture removal for private individuals - Service specification | |
| Galvanic anodes for cathodic protection in seawater and saline mud | |
| Gas Infrastructure - Compressor stations - Functional requirements | |
| Gas meters - Rotary displacement gas meters. | |
| Gas meters - Rotary displacement gas meters | |
| Gas supply systems - Compressor stations - Functional requirements. | |
| Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes | |
| GAS WELDING EQUIPMENT. SPECIFICATIONS FOR HOSE ASSEMBLIES FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES. | |
| GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEA WATER. | |
| General principles of cathodic protection in seawater | |
| GENERIC SPECIFICATION: CORES MADE OF FERRITE MATERIALS (Endorsed by AENOR in June of 1998.) | |
| Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing | |
| Glass in building - Pendulum test - Impact test method and classification for flat glass. | |
| Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data. | |
| Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability | |
| GS: CUSTOM-BUILT TRANSFORMERS AND INDUCTOR CORES. (Endorsed by AENOR in December of 1996.) | |
| GULLIES FOR BUILDINGS - PART 1: REQUIREMENTS | |
| Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm | |
| Gullies for buildings - Part 2: Roof drains and floor gullies without trap | |
| GULLIES FOR BUILDINGS - PART 2: TEST METHODS | |
| Gullies for buildings - Part 3: Evaluation of conformity | |
| Gullies for buildings - Part 3: Quality control | |
| Gullies for buildings - Part 4: Access covers | |
| Gullies for buildings - Part 5: Gullies with light liquids closure | |
| Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm | |
| Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure | |
| Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal | |
| Gullies for buildings. Part 1: Requirements. | |
| Gullies for buildings. Part 2: Test methods. | |
| Gullies for buildings. Part 5: Gullies with light liquids closure. | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) | |
| HOT ENVIRONMENTS. ANALYTICAL DETEMINATION AND INTERPRETATION OF THERMAL STRESS USING CALCULATION OF REQUIRED SWEAT RATE. (ISO 7933:1989 MODIFIED). | |
| IMPERFECTIONS IN OXYFUEL FLAME CUTS, LASER BEAM CUTS AND PLASMA CUTS -TERMINOLOGY. | |
| Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology. | |
| Industrial valves - Butt welding ends for steel valves | |
| INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS. | |
| Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | |
| Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | |
| Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests | |
| Industrial valves- Shell design strenght- Part 2: Calculation method for steel valve shell. | |
| Industrial valves-. Shell design strength. Part 1: Tabulation method for steel valve shells. | |
| Industrial valves. Method for sizing the operating element. | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. MECHANICAL ASPECTS. REQUIREMENTS. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. MECHANICAL ASPECTS. TEST METHODS. | |
| INDUSTRIAL, COMMERCIAL ANG GARAGE DOORS AND GATES - RESISTANCE TO WATER PENETRATION - TEST METHOD. | |
| INLAND NAVIGATION VESSELS-SWING DERRICKS. (Endorsed by AENOR in June of 1995.) | |
| Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters. | |
| INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS. PART 1: SAFETY REQUIREMENTS AND TESTS; PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS. | |
| Internal cathodic protection of metallic structures. | |
| Internal cathodic protection of metallic structures | |
| Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment by the owner | |
| Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and Acceptance | |
| Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems | |
| IRRIGATION TECHNIQUES. AUTOMATIC TURF IRRIGATION SYSTEMS. PART 2: DESIGN AND DEFINITION OF TYPICAL TECHNICAL TEMPLATES. | |
| IRRIGATION TECHNIQUES. AUTOMATIC TURF IRRIGATION SYSTEMS. PART 3: AUTOMATIC CONTROL AND SYSTEM MANAGEMENT. | |
| LEAD AND LEAD ALLOYS - LEAD ALLOY INGOTS FOR ELECTRIC CABLE SHEATHING AND FOR SLEEVES | |
| Lead and lead alloys - Rolled lead sheet for building purposes | |
| LEAD AND LEAD ALLOYS. ROLLED LEAD SHEET FOR BUILDING PURPOSES | |
| Light and lighting - Lighting of work places - Part 1: Indoor work places | |
| Light and lighting - Lighting of work places - Part 2: Outdoor work places | |
| Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests | |
| LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ -... | |
| LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design... | |
| LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture | |
| LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture | |
| Machinery for supply and circulation of liquid coating materials - Safety requirements (Endorsed by Asociación Española de Normalización in March of 2025.) | |
| Machinery for the supply and circulation of coating materials under pressure - Safety requirements | |
| MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (Endorsed by AENOR in October of 2010.) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines (Endorsed by AENOR in October of 2010.) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines. | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs (Endorsed by AENOR in August of... | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs (Endorsed by AENOR in March of... | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes (Endorsed by AENOR in August of 2000.) | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs (Endorsed by AENOR in August of 2000.) | |
| Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing (Endorsed by AENOR in November of 1999.)... | |
| Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items (Endorsed by Asociación Española de Normalización in November of 2020.) | |
| METHOD FOR THE SIMULATION OF WEAR AND CORROSION FOR THE DETECTION OF NICKEL RELEASE FROM COATED ITEMS | |
| Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods. | |
| Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods | |
| MULTIFUNCTIONAL CONTROLS FOR GAS BURNING APPLIANCES. | |
| Multifunctional controls for gas burning appliances | |
| NON ACTIVE SURGICAL IMPLANTS. JOINT REPLACEMENT IMPLANTS. SPECIFIC REQUIREMENTS FOR HIP JOINT REPLACEMENT IMPLANTS. | |
| NON ACTIVE SURGICAL IMPLANTS. JOINT REPLACEMENT IMPLANTS. SPECIFIC REQUIREMENTS FOR KNEE JOINT REPLACEMENT IMPLANTS. | |
| NON-DESTRUCTIVE EXAMINATION OF WELDS. RADIOGRAPHIC EXAMINATION OF WELDED JOINTS. ACCEPTANCE LEVELS. | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method | |
| NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 2: PINHOLE CAMERA RADIOGRAPHIC METHOD. | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro... | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method | |
| Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels | |
| Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels | |
| Non-destructive testing of welds - Radiographic testing of welded joints - Acceptance levels. | |
| Non-destructive testing of welds - Radiographic testing of welded joints - Acceptance levels | |
| NON-DESTRUCTIVE TESTING. MEASUREMENT AND EVALUATION OF THE X-RAY TUBE VOLTAGE. PART 2: CONSTANCY CHECK BY THE THICK FILTER METHOD. | |
| OXYGEN MONITORS FOR PATIENT BREATHING MIXTURES. PARTICULAR REQUIREMENTS | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium, chromium and lead in an aqueous extract | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract | |
| Paragliding equipment - Emergency parachutes - Safety requirements and test methods. | |
| Paragliding equipment - Emergency parachutes - Safety requirements and test methods | |
| PHOSPATE CONVERSION COATING OF METALS. METHOD OF SPECIFYING REQUIREMENTS. | |
| Plastics warning devices for underground cables and pipelines with visual characteristics. | |
| Plastics warning devices for underground cables and pipelines with visual characteristics | |
| PLASTICS. FIBRE REINFORCED COMPOSITES. PREPARATION OF COMPRESSION MOULDED TEST PLATES OF SMC, BMC AND DMC. | |
| PLASTICS. THERMOSET MOULDING COMPOUNDS. DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC. | |
| Prefabricated reinforced components of autoclaved aerated concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS). | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling -... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling -... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion. | |
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments (Endorsed by AENOR in December of 2000.) | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys... | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous... | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and... | |
| Protection of metallic materials against corrosion. Corrosion likelihood in soil. Part 1: General | |
| Protection of metallic materials againts corrosion- Corrosion likelihood in soil- Part 2: Low alloyed and non alloyed ferrous materials. | |
| Protective gloves for welders. | |
| Protective gloves for welders | |
| Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods | |
| RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN. | |
| Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return | |
| RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE. | |
| Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure | |
| Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products | |
| Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products | |
| RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS. | |
| Railway applications - Tank wagons - Part 6: Manholes | |
| Railway applications - Tank wagons - Part 7: Platforms and ladders | |
| Railway applications - Tank wagons - Part 8: Heating connections | |
| Railway applications- Tank wagons- Part 8: Heating connections. | |
| RAILWAY APPLICATIONS. TANK WAGONS. PART 1: MARKING OF TANK WAGONS FOR THE CARRIAGE OF DANGEROUS GOODS. | |
| RAILWAY APPLICATIONS. TANK WAGONS. PART 4: TOP DEVICES FOR TOP EMPTYING AND FILLING OF LIQUID PRODUCTS. | |
| RAILWAY APPLICATIONS. TANK WAGONS. PART 6: MANHOLES. | |
| Railway applications. Tank wagons. Part 7: Platforms and ladders. | |
| Reciprocating internal combustion engine driven generating sets - Safety | |
| Reciprocating internal combustion engine driven generating sets. Safety. | |
| RESILIENT FLOOR COVERINGS. VOCABULARY. | |
| Safety and control devices for burners and appliances burning gaseous fuels - Multifunctional controls | |
| Safety of machine tools - Hydraulic press brakes | |
| Safety of machine tools - Large numerically controlled turning machines and turning centres. | |
| SAFETY OF MACHINERY. LASER PROCESSING MACHINES. SAFETY REQUIREMENTS. | |
| Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 | |
| Sectional Specification: Adjusters used with magnetic oxide cores for use in inductors and tuned transformers | |
| Sectional Specification: Magnetic oxide cores for inductor applications | |
| Sectional Specification: Magnetic oxide cores for linear transformers | |
| Sectional Specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications | |
| Self adhesive tapes - Terminology. | |
| Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks | |
| Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants | |
| Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits | |
| Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent | |
| Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units | |
| SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT. PART 1: PREFABRICATED SEPTIC TANKS. | |
| Small wastewater treatment systems for up to 50 PT. Part 3: Packaged and/or site assembled domestic wastewater treatment plants. | |
| Soil improvers and growing media - Determination of a quantity | |
| Soil improvers and growing media - Sampling | |
| SOIL IMPROVERS AND GROWING MEDIA. DETERMINATION OF A QUANTITY | |
| SOIL IMPROVERS AND GROWING MEDIA. SAMPLING. | |
| Sports mats - Part 1: Gymnastic mats, safety requirements | |
| Sports mats - Part 2: Pole vault and high jump mats, safety requirements | |
| Sports mats - Part 3: Judo mats, safety requirements | |
| Sports mats - Part 4: Determination of shock absorption | |
| Sports mats - Part 5: Determination of the base friction | |
| Sports mats - Part 6: Determination of the top friction | |
| Sports mats - Part 7: Determination of static stiffness | |
| Sports mats. Part 1: Gymnastic mats, safety requirements. | |
| Sports mats. Part 4: Determination of shock absorption. | |
| Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ and for installation above ground - Design... | |
| Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method | |
| STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON AT LOW CONCENTRATIONS IN FLUE GASES - CONTINUOUS FLAME IONISATION DETECTOR METHOD. | |
| Stationary waste containers - Part 1: Containers with a capacity from 1 700 l to 5 000 I with flat or dome lid(s), for trunnion, double trunnion or pocket lifting... | |
| Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions... | |
| Stationary waste containers - Part 2: Performance requirements and test methods (Endorsed by AENOR in October of 2006.) | |
| Stationary waste containers - Part 2: Performance requirements and test methods. | |
| Stationary waste containers - Part 2: Performance requirements and test methods | |
| Stationary waste containers - Part 3: Safety and health requirements (Endorsed by AENOR in October of 2006.) | |
| Stationary waste containers - Part 3: Safety and health requirements. | |
| Stationary waste containers - Part 3: Safety and health requirements | |
| Surface active agents - Determination of pH value of solutions or dispersions | |
| Surface active agents - Determination of stability in hard water | |
| Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD | |
| SURFACE ACTIVE AGENTS. DETERMINATION OF THE PH VALUE OF SURFACTANT SOLUTIONS OR DISPERSIONS. | |
| Surfaces for sports areas - Determination of water infiltration rate | |
| Surfaces for sports areas - Determination of water infiltrattion rate | |
| Surfaces for sports areas - Test methods for the determination of vertical water infiltration and horizontal water flow rates | |
| Testing concrete - Part 4: Determination of ultrasonic pulse velocity | |
| Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression | |
| Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number. | |
| Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number | |
| Testing concrete in structures - Part 3: Determination of pull-out force | |
| Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity | |
| Testing concrete in structures. Part 1: Cored specimens. Taking, examining and testing in compression. | |
| TEXTILES - INDUSTRIAL SEWING THREADS MADE WHOLLY OR PARTLY FROM SYNTHETIC FIBRES | |
| Textiles - Para-aramid multifilament yarns - Test methods | |
| Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content. | |
| Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners. | |
| Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners | |
| TISSUE PAPER AND TISSUE PRODUCTS. PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY. | |
| TISSUE PAPER AND TISSUE PRODUCTS. PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION. | |
| TISSUE PAPER AND TISSUE PRODUCTS. PART 5: DETERMINATION OF WET TENSILE STRENGTH | |
| TISSUE PAPER AND TISSUE PRODUCTS. PART 6: DETERMINATION OF GRAMMAGE. | |
| TISSUE PAPER AND TISSUE PRODUCTS. PART 7: DETERMINATION OF OPTICAL PROPERTIES. | |
| Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries | |
| TRANSPORTATION SERVICES. GUIDANCE NOTES ON THE APPLICATION OF EN ISO 9002 TO THE ROAD TRANSPORTATION, STORAGE AND DISTRIBUTION INDUSTRIES. | |
| Truck mixers - Safety requirements | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered with foils bonded with adhesives | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods | |
| Valves - Shell design strength - Part 3: Experimental method. | |
| Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units | |
| Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems | |
| Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems. | |
| Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and varialble rate terminal units. | |
| VENTILATION FOR BUILDINGS. TEST PROCEDURES AND MEASURING METHODS FOR HANDLING OVER INSTALLED VENTILATION AND AIR CONDITIONING SYSTEMS. | |
| Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints | |
| WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 2: CALCULATION OF VERTICAL CYLINDRICAL TANKS. | |
| WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 3: DESIGN AND CALCULATION FOR SINGLE SKIN RECTANGULAR TANKS. | |
| Welded static non-pressurized thermoplastic tanks - Part 1: General principles. | |
| Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture. | |
| WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION | |
| WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION | |
| WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS. CLASSIFICATION. | |
| Windows and pedestrian doors - Terminology | |
| Wood poles for overhead lines - Determination of characteristic values. | |
| Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations. | |
| Wood poles for overhead lines - Strength grading criteria. | |
| Wood poles for overhead lines- Strength grading criteria. | |
| Wood poles for overhead lines. Durability requirements. |
| << Prev | Next >> |