AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesive for tiles - Definitions and specifications. | |
| Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives | |
| Adhesives - Determination of viscosity. | |
| Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking | |
| Adhesives for ceramic tiles - Part 2: Test methods | |
| Adhesives for tiles - Definitions and specifications | |
| Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts. | |
| Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts | |
| Adhesives for tiles - Requirements, evaluation of conformity, classification and designation | |
| ADHESIVES FOR TILES. DETERMINATION OF SHEAR ADHESION STRENGTH OF REACTION RESIN ADHESIVES. | |
| ADHESIVES FOR TILES. DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS. | |
| Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (Endorsed by AENOR in September of 2003.) | |
| Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity (Endorsed by AENOR in November of 2003.) | |
| Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity (Endorsed by AENOR in May of 2003.) | |
| Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airbone noise - Determination of the sound power level... | |
| Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level... | |
| Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages,... | |
| Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters | |
| Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form | |
| ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063. PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. | |
| ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063. PART 2: TOLERANCES ON DIMENSIONS AND FORM | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING HEAVY LOAD RELAYS OF ASSESSED QUALITY (HERMETICALLY SEALED, 5A TO 25A). (Endorsed by AENOR in September of 1996.) | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS FOR ENHANCED INDUSTRIAL APPLICATION. (Endorsed by AENOR in September of 1996.) | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING SEALED RELAYS FOR AGGRESIVE INDUSTRIAL APPLICATION. (Endorsed by AENOR in September of 1996.) | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY, DUAL-IN-LINE, WITH 14 X 9 MM BASE. (Endorsed by AENOR in June of 1996.) | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY, DUAL-IN-LINE, WITH 20X10 MM BASE. (Endorsed by AENOR in September of 1996.) | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY. (Endorsed by AENOR in September of 1996.) | |
| BDS: LIGHT EMITTING DIODES AND INFRARED EMITTING DIODES FOR FIBRE OPTIC SYSTEM OR SUB-SYSTEM. (Endorsed by AENOR in September of 1996.) | |
| BDS: LIQUID CRISTAL DISPLAYS. MONOCHROME LCDS WITHOUT ELECTRONIC CIRCUIT. (Endorsed by AENOR in September of 1996.) | |
| BDS: PIN-PHOTODIODES FOR FIBRE OPTIC APPLICATIONS. (Endorsed by AENOR in September of 1996.) | |
| Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes | |
| Blank Detail Specification: Ambient rated photocouplers with phototransistor output | |
| BLANK DETAIL SPECIFICATION: ELECTROMECHANICAL ALL-OR NOTHING TELECOM RELAYS OF ASSESSED QUALITY, DUAL-IN LINE, WITH 15 X 7,5 MM BASE, 2 CHANGE-OVER CONTACTS. (Endorsed by AENOR in May of 1996.) | |
| BLANK DETAIL SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY, DUAL-IN-LINE, WITH 14 X 9 MM BASE. (Endorsed by AENOR in June of 1996.) | |
| BLANK DETAIL SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY, DUAL-IN-LINE, WITH 15 X 7,5 MM BASE, 2 CHANGE-OVER CONTACTS. (Endorsed by AENOR in January of 1996.) | |
| BLANK DETAIL SPECIFICATION: HERMETICALLY SEALED RELAYS. FOR SEVERE STATIC ENVIRONMENTAL CONDITIONS (EN 116205). FOR SEVERE MOBILE ENVIRONMENTAL CONDITIONS (EN 116206). FOR SEVERE AIRBORNE ENVIRONMENTAL CONDITIONS (EN 116207). (Endorsed by AENOR... | |
| Blank Detail Specification: Infrared emitting diodes, infrared emitting diode arrays | |
| Blank Detail Specification: Light emitting diodes, light emitting diode arrays, light emitting diode displays without internal logic and resistor | |
| Blank Detail Specification: Photodiodes, photodiode arrays (not intended for fibre optic applications) | |
| Blank Detail Specification: Phototransistors, photodarlington transistors, phototransistor arrays | |
| BLOOD GAS EXCHANGERS | |
| Buiding hardware - Controlled door closing devices - Requirements and test methods | |
| Building hardware - Controlled door closing devices - Requirements and test methods | |
| BUILDING HARDWARE - DOOR AND WINDOW BOLTS - REQUIREMENTS AND TEST METHODS | |
| Building hardware - Door coordinator devices - Requirements and test methods | |
| Building hardware - Door cordinator devices - Requirements and test methods | |
| Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods | |
| BUILDING HARDWARE. CONTROLLED DOOR CLOSING DEVICES. REQUIREMENTS AND TEST METHODS. | |
| BUILDING HARDWARE. DOOR COORDINATOR DEVICES. REQUIREMENTS AND TEST METHODS. | |
| BUILDING HARDWARE. ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS. REQUIREMENTS AND TEST METHODS. | |
| Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials | |
| Chemicals for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate | |
| CHEMICALS FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM DIHYDROGEN ORTHOPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN COMSUMPTION. MONOPOTASSIUM DIHYDROGEN ORTHOPHOSPHATE. | |
| Chemicals used for treatment of water intended for human consumption - Calcium tetrahydrogen bis(orthophosphate) | |
| Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen pyrophosphate | |
| Chemicals used for treatment of water intended for human consumption - Disodium hydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution. | |
| Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution | |
| Chemicals used for treatment of water intended for human consumption - Potassium dihydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium calcium polyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium silicate | |
| Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Tetrapotassium pyrophosphate | |
| Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate | |
| Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. DIPOTASSIUM HYDROGEN ORTHOPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. DISODIUM HYDROGEN ORTHOPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. MONOCALCIUM PHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM ACID PYROPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM CALCIUM POLYPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM SILICATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM TRIPOLYPHOSPATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. TETRAPOTASSIUM PYROPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. TETRASODIUM PYROPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. TRIPOTASSIUM ORTHOPHOSPHATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. TRISODIUM ORTHOPHOSPHATE. | |
| Controls for heating systems - Part 1: Control equipment for hot water heating systems | |
| Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems. | |
| Controls for heating systems - Part 3: Control equipment for electrical heating systems | |
| Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems | |
| Controls for heating systems - Part 5: Start-Stop schedulers for heating systems | |
| Controls for heating systems- Part 4: Tariff compensated optimum start-stop control equipment for electrical systems | |
| CONTROLS FOR HEATING SYSTEMS. PART 1: OUTSIDE TEMPERATURE COMPENSATED CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS. | |
| Conveying, spraying and placing machines for concrete and mortar - Safety requirements | |
| Conveying, spraying and placing machines for concrete and mortar. Safety requirements. | |
| Copper and copper alloys - Material condition designation | |
| Copper and copper alloys - Sheet and strip for building purposes | |
| COPPER AND COPPER ALLOYS. MATERIAL CONDITION OR TEMPER DESIGNATION. | |
| COPPER AND COPPER ALLOYS. SHEET AND STRIP FOR BUILDING PURPOSES. | |
| Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices | |
| CRANES SAFETY. REQUIREMENTS FOR HEALTH AND SAFETY. PART 2: LIMITING AND INDICATING DEVICES. | |
| DIESEL AND COMESTIC HEATING FUELS. DETERMINATION OF COLD FILTER PLUGGIN POINT. | |
| Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method | |
| DIESEL AND DOMESTIC HEATING FUELS. DETERMINATION OF COLD FILTER PLUGGING POINT. | |
| Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters | |
| DOMESTIC AND NON-DOMESTIC GAS-FIRED AIR HEATERS. SUPPLEMENTARY REQUIREMENTS FOR CONDENSING AIR HEATERS. | |
| DOORS - CLASSIFICATION OF STRENGTH REQUIREMENTS. | |
| Doors - Classification of strength requirements | |
| Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission | |
| Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | |
| Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission | |
| ELECTROMAGNETIC COMPATIBILITY. PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND PASSENGER CONVEYORS. EMISSION. | |
| ELECTROMAGNETIC COMPATIBILITY. PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND PASSENGER CONVEYORS. IMMUNITY. | |
| Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 | |
| Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 | |
| Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8 | |
| Execution of special geotechnical work - Sheet pile walls, combined pile walls, high modulus walls | |
| Execution of special geotechnical work - Sheet-pile walls | |
| FEATHER AND DOWN - METHOD OF TEST FOR MEASURING THE SIZES OF QUILTS FILLED WITH FEATHER AND/OR DOWN (Endorsed by AENOR in July of 1996.) | |
| FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE TURBIDITY OF AN AQUEOUS EXTRACT | |
| Feather and down - Test methods - Determination of water-soluble chlorides | |
| FEATHER AND DOWN. TEST METHODS. DETERMINATION OF MOISTURE CONTENT. | |
| FEATHER AND DOWN. TEST METHODS. DETERMINATION OF THE OIL AND FAT CONTENT. | |
| FEATHER AND DOWN. TEST METHODS. DETERMINATION OF THE OXYGEN INDEX NUMBER. | |
| FIXED FIREFIGHTING SYSTEM. COMPONENTS FOR GAS EXTINGUISHING SYSTEMS. PART 8: REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS FOR CO2 SYSTEMS | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators (Endorsed by AENOR in... | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices (Endorsed by AENOR in October of 2006.) | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors (Endorsed by AENOR in October of 2006.) | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors | |
| Fixed firefighting systems. Components for gas extinghishing systems. Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems. | |
| Fixed firefighting systems. Components for gas extinguishing systems. Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems. | |
| Fixed firefighting systems. Components for gas extinguishing systems. Part 7: Requirements and test methods for nozzles for CO2 systems. | |
| Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules | |
| FLUED OIL STOVES WITH VAPORIZING BURNERS. | |
| Flued oil stoves with vaporizing burners | |
| Food processing machinery - Automatic dividers - Safety and hygiene requirements | |
| Food processing machinery - Automatic dough dividers - Safety and hygiene requirements | |
| Food processing machinery - Intermediate provers - Safety and hygiene requirements (Endorsed by AENOR in November of 2001.) | |
| Food processing machinery - Intermediate provers - Safety and hygiene requirements. | |
| Food processing machinery - Intermediate provers - Safety and hygiene requirements | |
| Food processing machinery - Moulders - Safety and hygiene requirements (Endorsed by AENOR in November of 2001.) | |
| Food processing machinery - Moulders - Safety and hygiene requirements. | |
| Food processing machinery - Moulders - Safety and hygiene requirements | |
| Food processing machinery. Automatic dividers. Safety and hygiene requirements. | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 1: General considerations | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 3: Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 4: Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 5: Enzymatic determination of nitrate content of vegetable-containing food for babies and infants | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 7: Continuous flow method for the determination of nitrate content of vegetables and vegetable products after Cadmium reduction | |
| FOODSTUFFS. DETERMINATION OF NITRATE AND/OR NITRITE CONTENT. PART 1: GENERAL CONSIDERATIONS. | |
| Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements | |
| Gas supply systems - Gas pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10... | |
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations. | |
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel. | |
| Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation. | |
| Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types. | |
| Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types | |
| GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES. PART 1: PNEUMATIC TYPES | |
| GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS (Endorsed by AENOR in December of 1997.) | |
| GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS. PART 1: GENERAL. (Endorsed by AENOR in May of 1996.) | |
| GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS. PART 3: TEST AND MEASUREMENT PROCEDURES. (Endorsed by AENOR in May of 1996.) | |
| GENERIC SPECIFICATION: SEMICONDUCTOR OPTOELECTRONIC AND LIQUID CRYSTAL DEVICES. (Endorsed by AENOR in September of 1996.) | |
| Gravity drainage systems inside buidlings. Part 4: Wastewater lifting plants. Layout and calculation. | |
| Gravity drainage systems inside buildings. Part 1: General and performance requirements. | |
| GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 2: SANITARY PIPEWORK, LAYOUT AND CALCULATION. | |
| GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 3: ROOF DRAINAGE, LAYOUT AND CALCULATION. | |
| GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 5: INSTALLATION AND TESTING, INSTRUCTIONS FOR OPERATION, MAINTENANCE AND USE. | |
| GS: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS. PART 2: GENERIC DATA AND METHODS OF TEST FOR TIME DELAY RELAYS. (Endorsed by AENOR in September of 1996.) | |
| GS: SOLID STATE ALL-OR-NOTHING RELAYS OF ASSESSED QUALITY. GENERIC DATA AND METHODS OF TEST. (Endorsed by AENOR in September of 1996.) | |
| Health informatics - Digital imaging - Communication, workflow and data management | |
| Impact absorbing playground surfacing. Safety requirements and test methods. | |
| Impact attenuating playground surfacing - Determination of critical fall height | |
| Impact attenuating playground surfacing - Methods of test for determination of impact attenuation | |
| Industrial valves - Cast iron gate valves | |
| Industrial valves. Cast iron gate valves. | |
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas... | |
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas | |
| INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS. GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS. | |
| INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS. GENERAL REQUIREMENTS. | |
| KITCHEN FURNITURE. SAFETY REQUIREMENS AND TEST METHODS FOR BUILT-IN AND FREE STANDING KITCHEN CABINETS AND WORK TOPS. | |
| LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS. COOLING MODE. DEFINITIONS, TESTING AND REQUIREMENTS (Endorsed by AENOR in November of 2000.) | |
| Material and articles in contact with foodstuffs. Plastics. Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides. | |
| Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of... | |
| Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures | |
| Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs... | |
| Materials and articles in contact with foodstuffs - Plastics - Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol... | |
| Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils | |
| Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion | |
| Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants | |
| Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration into aqueous food simulants by total immersion | |
| Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell | |
| Materials and articles in contact with foodstuffs - Plastics - Part 5: Test methods for overall migration into aqueous food simulants by cell | |
| Materials and articles in contact with foodstuffs - Plastics - Part 6: Test methods for overall migration into olive oil using a pouch | |
| Materials and articles in contact with foodstuffs - Plastics - Part 7: Test methods for overall migration into aqueous food simulants using a pouch | |
| Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling | |
| Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous food simulants by article filling | |
| MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR THERMAL SHOCK AND THERMAL SHOCK ENDURANCE (Endorsed by AENOR in August of 1997.) | |
| MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR TRANSLUCENCY OF CERAMIC ARTICLES (Endorsed by AENOR in August of 1997.) | |
| Materials and articles in contact with foodstuffs. Plastics. Part 13: Test methods for overall migration at high temperatures. | |
| Materials and articles in contact with foodstuffs. Plastics. Part 1: Guide to the selection of conditions and test methods for overall migration. | |
| MECHANICAL VIBRATION. DECLARATION AND VERIFICATION OF VIBRATION EMISSION VALUES. | |
| Natural stone products - Dimensional stone work - Requirements | |
| Natural stone products - Modular tiles - Requirements | |
| Natural stone products - Slabs for floors and stairs - Requirements | |
| Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits | |
| Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 3: Endovascular devices | |
| NON ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS. PART 1: HEART VALVE SUBSTITUTES. | |
| NON ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS. PART 3: ENDOVASCULAR DEVICES. | |
| Non destructive testing. Eddy current testing. General principles and guidelines. | |
| Non destuctive testing of welds. General rules for metallic materials. | |
| NON-ACTIVE SURGICAL IMPLANTS. JOINT REPLACEMENT IMPLANTS. PARTICULAR REQUIREMENTS. | |
| NON-ACTIVE SURGICAL IMPLANTS. PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS. PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS. | |
| Non-destructive examination of welds - General rules for metallic materials | |
| NON-DESTRUCTIVE EXAMINATION OF WELDS. GENERAL RULES FOR METALLIC MATERIALS. | |
| Non-destructive testing - Eddy current testing - General principles and guidelines | |
| OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING | |
| Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking (Endorsed by AENOR in October of 2006.) | |
| Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking | |
| Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking (Endorsed by AENOR in October of 2006.) | |
| Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking | |
| Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (Endorsed by AENOR in October of 2006.) | |
| Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing | |
| Operating forces - Test method - Part 1: Windows | |
| Operating forces - Test method - Part 2: Doors | |
| Operating forces. Test method. Part 2: Doors. | |
| Plastics and rubber machines - Internal mixers - Safety requirements | |
| Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders | |
| Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators | |
| Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers | |
| Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders | |
| Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators | |
| Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off | |
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports | |
| Plastics piping systems - Polyethylene (PE), crosslinked polyethylene (PE-X) and unplasticized polyamide (PA-U) pipes - Test method for the resistance to internal pressure after application of squeeze-off | |
| Plastics piping systems - Thermoplastics fittings - Test method for impact resistance | |
| PLASTICS PIPING SYSTEMS. BRACKETS FOR RAINWATER PIPING SYSTEMS. TEST METHOD FOR BRACKET STRENGTH. | |
| PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS. | |
| PLASTICS PIPING SYSTEMS. POLYETHYLENE PIPING MATERIALS AND COMPONENTS. DETERMINATION OF VOLATILE CONTENT. | |
| Playground equipment - Part 1: General safety requirements and test method | |
| PLAYGROUND EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS | |
| PLAYGROUND EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR SWINGS. | |
| Playground equipment - Part 2: Additional specific safety requirements and test methods for swings | |
| PLAYGROUND EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR SLIDES . | |
| Playground equipment - Part 3: Additional specific safety requirements and test methods for slides | |
| PLAYGROUND EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR RUNWAYS. | |
| Playground equipment - Part 4: Additional specific safety requirements and test methods for runways | |
| Playground equipment - Part 5: Additional specific safety requirements and test method for carousels | |
| PLAYGROUND EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CAROUSELS. | |
| PLAYGROUND EQUIPMENT - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR ROCKING EQUIPMENT. | |
| Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment | |
| Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network | |
| Playground equipment and surfacing - Part 1: General safety requirements and test methods | |
| Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings | |
| Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides | |
| Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways | |
| Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels | |
| Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment | |
| Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation | |
| Playground equipment. Part 1: General safety requirements and test method. | |
| Playground equipment. Part 5: Additional specific safety requirements and test method for carousels. | |
| Playground equipment. Part 6: Additional specific safety requirements and test methods for rocking equipment. | |
| PLAYGROUND EQUIPMENT. PART 7: GUIDANCE ON INSTALLATION, INSPECTION, MAINTENANCE AND OPERATION. | |
| Precast concrete products - General rules for factory production control of glass-fibre reinforced cement | |
| Precast concrete products - General rules for production control of glassfibre reinforced concrete | |
| Precast concrete products - Hollow core slabs | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test" | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content | |
| Precast concrete products - Test methods for glassfibre reinforced concrete | |
| Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps,... | |
| Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code... | |
| PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING AN ELECTRICAL EFFECT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - REQUIREMENTS, TESTING, MARKING | |
| Railway applications - Axleboxes - Lubricating greases | |
| Railway applications - Axleboxes - Performance testing | |
| Railway applications - Axleboxes - Rolling bearings | |
| RAILWAY APPLICATIONS. AXLEBOXES. LUBRICATING GREASES. | |
| RAILWAY APPLICATIONS. AXLEBOXES. PERFORMANCE TESTING. | |
| RAILWAY APPLICATIONS. AXLEBOXES. ROLLING BEARINGS. | |
| Resilient floor coverings - Agglomerated cork underlays - Specification | |
| Resilient floor coverings - Cork floor tiles - Specification | |
| Resilient floor coverings - Determination of moisture content of agglomerated composition cork | |
| RESILIENT FLOOR COVERINGS .CORK FLOOR TILES . SPECIFICATION. | |
| Respiratory equipment - Compressed gases for breathing apparatus | |
| Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking | |
| RESPIRATORY PROTECTIVE DEVICES. COMPRESSED AIR FOR BREATHING APPARATUS. | |
| Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers. | |
| Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers | |
| Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders. | |
| RUBBER AND PLASTICS MACHINES. INTERNAL MIXERS. SAFETY REQUIREMENTS. | |
| RUBBER AND PLASTICS MACHINES. SIZE REDUCTION MACHINES. PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS | |
| Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type | |
| Safety of escalators and moving walks - Part 1: Construction and installation | |
| Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks | |
| Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks | |
| Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks | |
| Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks | |
| Safety of industrial trucks - Electrical/electroni c requirements | |
| Safety of industrial trucks - Test methods for measuring noise emissions. | |
| Safety of industrial trucks - Test methods for measuring noise emissions | |
| SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. | |
| SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. | |
| SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. | |
| Safety of industrial trucks. Test methods for measuring noise emissions. | |
| SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS. | |
| Safety rules for the construction and installation of escalators and passenger conveyors | |
| Self-adhesive tapes - Determination of the water-soluble corrosive ions | |
| Self-adhesive tapes - Flagging of adhesive tape | |
| Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing | |
| Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing | |
| Self-adhesive tapes - Measurement of bursting strength | |
| Self-adhesive tapes - Measurement of elongation under static load | |
| Self-adhesive tapes - Measurement of flame resistance | |
| Self-adhesive tapes - Measurement of impact resistance | |
| Self-adhesive tapes - Measurement of resistance to elevated temperature and humidity | |
| Self-adhesive tapes - Measurement of tear resistance by the pendulum | |
| Self-adhesive tapes - Measurement of the length of a roll of adhesive tape | |
| Self-adhesive tapes - Measurement of the unwinding force at high speed | |
| Self-adhesive tapes - Measurement of water transmission in a warm humid atmosphere | |
| Self-adhesive tapes - Solvent penetration into adhesive masking tapes | |
| SHUTTERS AND BLINDS POWER OPERATED - SAFETY IN USE - MEASUREMENT OF THE TRANSMITTED FORCE. | |
| Smoke and heat control systems - Part 10: Power supplies (Endorsed by AENOR in August of 2006.) | |
| Smoke and heat control systems - Part 10: Power supplies | |
| Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, installation, acceptance testing, routine testing and maintenance | |
| Smoke and heat control systems - Part 1: Specification for smoke barriers (Endorsed by AENOR in August of 2006.) | |
| Smoke and heat control systems - Part 1: Specification for smoke barriers (Endorsed by AENOR in September of 2006.) | |
| Smoke and heat control systems - Part 1: Specification for smoke barriers | |
| Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators | |
| Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators | |
| Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) | |
| Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators. | |
| Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators | |
| Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits | |
| Smoke and heat control systems - Part 7: Smoke duct sections | |
| Smoke and heat control systems - Part 8: Smoke control dampers | |
| Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2)°C (ISO 8190:1992 modified) | |
| Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified) | |
| SOLID FERTILIZERS. MEASUREMENTS OF STATIC ANGLE OF REPOSE. (ISO 8398:1989 MODIFIED). | |
| SS: ELECTROMECHANICAL ALL-OR-NOTHING HEAVE LOAD RELAYS OF ASSESSED QUALITY (RATED FROM 5A AND ABOVE). (Endorsed by AENOR in September of 1996.) | |
| SS: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS (INCLUDING RELAYS FOR SEVERE ENVIRONMENTAL CONDITIONS). (Endorsed by AENOR in September of 1996.) | |
| SS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY. (Endorsed by AENOR in September of 1996.) | |
| STARCHES AND DERIVED PRODUCTS. DETERMINATION OF SULFUR DIOXIDE CONTENT. ACIDIMETRIC METHOD. (ISO 5379:1983 MODIFIED). | |
| STERILIZATION OF MEDICAL DEVICES. ESTIMATION OF THE POPULATION OF MICRO-ORGANISMS ON PRODUCT. PART 1: REQUIREMENTS. | |
| STERILIZATION OF MEDICAL DEVICES. ESTIMATION OF THE POPULATION OF MICRO-ORGANISMS ON PRODUCT. PART 2: GUIDANCE. | |
| STERILIZATION OF MEDICAL DEVICES. ESTIMATION OF THE POPULATION OF MICRO-ORGANISMS ON PRODUCT. PART 3: GUIDE TO THE METHODS FOR VALIDATION OF MICROBIOLOGICAL TECHNIQUES. | |
| Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test | |
| Thermal insulating products for building applications - Determination of bending behaviour | |
| Thermal insulating products for building applications - Determination of freeze-thaw resistance | |
| Thermal insulating products for building applications - Determination of linear dimensions of test specimens | |
| Thermal insulating products for building applications - Determination of long term water absorption by diffusion | |
| Thermal insulating products for building applications - Determination of long term water absorption by immersion | |
| Thermal insulating products for building applications - Determination of shear behaviour | |
| Thermal insulating products for building applications - Determination of water vapour transmission properties | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF BENDING BEHAVIOUR. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF FREEZE-THAW RESISTANCE. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF LONG TERM WATER ABSORPTION BY DIFFUSION. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF LONG TERM WATER ABSORPTION BY IMMERSION. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF SHEAR BEHAVIOUR. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF WATER VAPOUR TRANSMISSION PROPERTIES. | |
| TIMBER STRUCTURES - GLUED LAMINATED TIMBER - STRENGTH CLASSES AND DETERMINATION OF CHARACTERISTIC VALUES | |
| TIMBER STRUCTURES. STRUCTURAL TIMBER AND GLUED LAMINATED TIMBER. DETERMINATION OF SHEAR STRENGTH AND MECHANICAL PROPERTIES PERPENDICULAR TO THE GRAIN. | |
| TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING. | |
| TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY. GUARDS FOR POWER TAKE-OFF (PTO) DRIVE SHAFTS. WEAR AND STRENGTH TESTS. | |
| Tunneling machines. Air locks. Safety requirements | |
| Tunnelling machines - Air locks - Safety requirements | |
| Tunnelling machines - Road headers and continuous miners - Safety requirements | |
| Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements | |
| Vacuum drainage systems inside buildings | |
| Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems | |
| Wastewater lifting plants for building and sites. Principles of construction and testing. Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter. | |
| Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter | |
| Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater | |
| Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications | |
| Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter | |
| Wastewater lifting plants for buildings and sites. Principles of construction and testing. Part 1: Lifting plants for wastewater containing faecal matter. | |
| Wastewater lifting plants for buildings and sites. Principles of construction and testing. Part 2: Lifting plants for faecal-free wastewater. | |
| WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES. PRINCIPLES OF CONSTRUCTION AND TESTING. PART 3: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER FOR LIMITED APPLICATIONS. | |
| WATER QUALITY. DETERMINATION OF PHOSPHORUS. AMMONIUM MOLYBDATE SPECTROMETRIC METHOD. | |
| WELDING CONSUMABLES. QUALITY REQUIREMENTS FOR MANUFACTURE, SUPPLY AND DISTRIBUTION OF CONSUMABLES FOR WELDING AND ALLIED PROCESSES. | |
| WELDING CONSUMABLES. TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF CREEP-RESISTING STEELS. CLASSIFICATION. | |
| WELDING CONSUMABLES. WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS. CLASSIFICATION. | |
| Windows and doors - Resistance to repeated opening and closing - Test method. | |
| Windows and doors - Resistance to repeated opening and closing - Test method | |
| Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) (Endorsed by AENOR in August of 2006.) | |
| Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) | |
| Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) (Endorsed by AENOR in August of 2006.) | |
| Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) | |
| Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method | |
| Wood-based panels - Determination of duration of load and creep factors | |
| WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE CONTENT. EXTRACTION METHOD CALLED THE PERFORATOR METHOD. | |
| ZERO FOR GAS BURNERS AND GAS BURNING APPLIANCES. | |
| Zinc and zinc alloys - Method of sampling - Specifications | |
| ZINC AND ZINC ALLOYS. OPTICAL EMISSION SPECTROMETRIC ANALYSIS. | |
| ZINC AND ZINC ALLOYS. PRIMARY ZINC. | |
| Zinc and zinc alloys. Primary zinc |
| << Prev | Next >> |