UL Standards & Engagement Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 1 1.1 The purpose of this standard is to provide minimum requirements for the design, construction, and marking of electrical equipment or parts of such equipment for use in Class... | |
| 1 1.1 These requirements cover construction, performance, operation, and maintenance of: a) Central station burglar alarm systems intended and specifically designated for burglary-protection use at mercantile and banking premises, mercantile... | |
| 1 1.1 These requirements cover controllers intended for starting and stopping centrifugal and positive displacement fire pumps, including automatic and non-automatic types for electric motor with or without transfer switch... | |
| 1 1.1 These requirements cover the blades of attachment plugs and current taps intended to be connected to the conductors of flexible cords using crimped connections, for use on cord... | |
| 1 1.1 This Standard specifies the requirements for Portable Power Cables for use in accordance with the National Electrical Code, NFPA 70. 1 1.2 Any references to UL 2556, refer... | |
| 1.1 Products covered by these requirements are single-stage and multi-stage grease filters. These grease filters are intended for installation and use in accordance with the Standard for Ventilation Control and... | |
| 1.1 The cabinets covered by these requirements are intended for installation in accordance with the National Fire Protection Association Flammable and Combustible Liquids Code, NFPA 30, the Fire Code, NFPA... | |
| 1.1 The intent of this document is to provide recommendation for use of detectors for flammable gases, which includes fixed, portable and transportable equipment types, to provide protection from explosion... | |
| 1.1 The intent of this Standard is to evaluate the integrity of power, control, instrumentation, and data cables for their ability to maintain circuit integrity when subjected to standard fire... | |
| 1.1 The requirements in this standard apply to a low-voltage landscape lighting system and components that consist of an isolating type power unit, low voltage cable or flexible cord, and... | |
| 1.1 The requirements in this standard cover indoor and outdoor ballasts, including starting circuits for the operation of high-intensity-disch arge lamps, and associated equipment, in accordance with the National Electrical... | |
| 1.1 The requirements in this Standard cover the individual units and equipment that operate within the context of a fundamental hospital signaling nurse call system (NCS). 1.2 A fundamental NCS... | |
| 1.1 The requirements in this Standard cover wireless power transfer (WPT) equipment for transferring power to a stationary electric vehicle. WPT equipment consists of two devices, the power source and... | |
| 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coat ed, silicone-polymer-coa ted, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see... | |
| 1.1 The requirements of this Standard apply to manually operated, general-use snap switches and modular switch assembly for connection to copper (Cu) or copper-clad conductors used in accordance with the... | |
| 1.1 The requirements of this Standard cover arc-fault circuit-interrupters (AFCIs) of the branch/feeder, outlet circuit, portable, and cord type intended for use in dwelling units. These devices are intended to... | |
| 1.1 The requirements of this Standard cover outdoor seasonal-use cord-connected wiring devices that are intended for temporary outdoor use - not to exceed 90 days - with outdoor equipment, Christmas-tree,... | |
| 1.1 The test method specified in this Standard is intended to provide uplift resistance data for the evaluation of the attachment of roof covering systems to roof decks by using... | |
| 1.1 These configurations cover attachment plugs, receptacles, and cord connectors, for use in accordance with the National Electrical Code (NEC), NFPA 70 and CSA C22.1, Canadian Electrical Code, Part I... | |
| 1.1 These configurations cover attachment plugs, receptacles, cord connectors, some forms of current taps, and flatiron and appliance plugs - all for use in accordance with the National Electrical Code... | |
| 1.1 These fire tests are applicable to assemblies of masonry units and to composite assemblies of structural materials for buildings, including bearing and other walls and partitions, columns, girders, beams,... | |
| 1.1 These methods of fire tests are applicable to door assemblies of various materials and types of construction for use in wall openings to retard the passage of fire. 1.2... | |
| 1.1 These methods of fire tests are applicable to swinging door assemblies, including door frames with lights and panels, of various materials and types of construction for use in wall... | |
| 1.1 These minimum requirements cover accessories intended for direct connection to the low or delivery pressure side of compressed gas regulators. These devices are not intended for direct connection to... | |
| 1.1 These minimum requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa)... | |
| 1.1 These minimum requirements cover special purpose nonmetallic containers and tanks (vessels) for specific aboveground use applications for combustible or non-combustible liquids as indicated for each special purpose type. The... | |
| 1.1 These minimum requirements cover the following types of anhydrous ammonia and liquefied petroleum gas (LP-Gas) valves that are used to control the flow of liquid and/or vapor into and... | |
| 1.1 These requirements apply to air dispersion system materials for use in accordance with the following Installation Codes: a) Standard of the National Fire Protection Association for the Installation of... | |
| 1.1 These requirements apply to clothes dryer transition ducts intended for venting household and commercial clothes dryers. 1.2 The ducts covered by these requirements are intended to connect a clothes... | |
| 1.1 These requirements apply to DC conductive charging equipment intended to be supplied with a maximum input voltage of 1000 V ac or 1500 V dc, for recharging the propulsion... | |
| 1.1 These requirements apply to discrete thermistor-type devices constructed of ceramic or polymeric semiconductor material. 1.2 These thermistors are intended for use as: a) Self-limiting devices such as heaters; b)... | |
| 1.1 These requirements apply to electric motor-operated water pumps of the nonsubmersible type, pump-filter combinations, and chlorinators for use with swimming pools, hot tubs, and spas, to be used in... | |
| 1.1 These requirements apply to factory built manually and/or automatically fueled solid fuel-fired hydronic heating appliances, water heaters and boilers, as defined in Section 5, Glossary, intended to be fixed... | |
| 1.1 These requirements apply to folding rollaway tables. The folding tables may have integral benches or stool seating. 1.2 These requirements do not apply to any electrical circuitry integral to... | |
| 1.1 These requirements apply to hardware for horizontally sliding fire doors which have demonstrated in fire tests fire-resistive properties warranting their use with two-ply and three-ply tin-clad fire doors tested... | |
| 1.1 These requirements apply to hardware for swinging fire doors which have demonstrated in fire tests fire-resistive properties warranting their use with two-ply and three-ply tin-clad fire doors tested in... | |
| 1.1 These requirements apply to household, commercial, and institutional-use carts, stands and entertainment centers intended to provide a surface for the support or attachment of audio and/or video equipment. 1.2... | |
| 1.1 These requirements apply to isolating signal and feedback transformers intended to be used in electronic equipment where only audio, video, and other signal waveforms are transformed. These transformers are... | |
| 1.1 These requirements apply to light-emitting diode (LED) retrofit kits that are intended to retrofit existing light sources or other components in previously installed luminaires that already comply with one... | |
| 1.1 These requirements apply to low voltage lighting systems and components intended for installation in accordance with the National Electrical Code, NFPA 70, Article 411. 1.2 These requirements cover: a)... | |
| 1.1 These requirements apply to low-voltage AC power circuit breakers as follows: a) Stationary-mounted or drawout-mounted types, b) 2-pole, 3-pole, and 4-pole constructions, c) Manually operated or power operated, and... | |
| 1.1 These requirements apply to low-voltage luminaires, rated 24 volts or less, of the surface mounted or recessed type intended for permanent installation in park trailers in accordance with Article... | |
| 1.1 These requirements apply to materials for the fabrication of air duct and air connector systems for use in accordance with the International Mechanical Code (IMC), International Residential Code (IRC),... | |
| 1.1 These requirements apply to membrane switches actuated by human activity, via a membrane or sensing substrate, to operate or control appliances and electrical equipment. The membrane switch electrical rating... | |
| 1.1 These requirements apply to non-networked embedded software residing in programmable components performing safety-related functions whose failure is capable of resulting in a risk of fire, electric shock, or injury... | |
| 1.1 These requirements apply to overtemperature protectors, and overcurrent protectors to be employed in radio- and television-type appliances in applications where the protectors are relied upon to limit power, current,... | |
| 1.1 These requirements apply to self-contained spas. They also apply to field-installed equipment assemblies, blowers, and controls for use with field-installed hot tubs, swimming pools, and non-self-contained spas. These products... | |
| 1.1 These requirements apply to semiconductor devices of the isolated-mounting type - thyristors, transistors, diodes, and the like, and hybrid modules consisting of combinations of these devices. 1.2 The term... | |
| 1.1 These requirements apply to shelves, brackets, and similar devices, that provide structural support for the mounting of audio/video equipment, information technology equipment, and similar products, to the building structure... | |
| 1.1 These requirements apply to speakers, rated at 300 V or less, for fire alarm and signaling systems intended for indoor and/or outdoor installation: a) In Canada only: in accordance... | |
| 1.1 These requirements apply to supplementary protectors intended for use as overcurrent, or over- or under-voltage protection within an appliance or other electrical equipment where branch circuit overcurrent protection is... | |
| 1.1 These requirements apply to swinging door closers equipped with integral electromechanical or electromagnetic holders and which may be provided with integral smoke detectors. These requirements also apply to electromagnetic... | |
| 1.1 These requirements apply to the construction, performance and operation of equipment intended for use in proprietary burglar alarm units and systems used to protect against burglary. These products are... | |
| 1.1 These requirements apply to the construction, performance, and operation of burglary-resistant electric locking mechanisms and their related devices, such as control units, control switches, and power supplies, and the... | |
| 1.1 These requirements apply to the construction, performance, and operation of equipment intended to provide antitheft protection. 1.2 An antitheft alarm is intended to give both audible and visible signals... | |
| 1.1 These requirements apply to the following stationary equipment for use in nonhazardous locations rated greater than 600 volts up to 7200 V, and remote control assemblies for such equipment:... | |
| 1.1 These requirements apply to the installation of alarm protection products and devices connected to form a residential burglar alarm system. 1.2 These requirements include the criteria for classifying the... | |
| 1.1 These requirements apply to: a) Induction power transmitters intended to be supplied by an internal or external power source, which is powered by a branch circuit of 600 volts... | |
| 1.1 These requirements are intended to cover both self-ballasted lamps and self-ballasted lamp adapters rated 120 to 347 V AC nominal for connection to screw-base, pin-base, or recessed single contact... | |
| 1.1 These requirements are supplementary to other applicable requirements in the Standard for Luminaires, UL 1598 and other luminaire standards, to qualify the luminaire for installation on marine vessels. References... | |
| 1.1 These requirements are supplementary to the applicable requirements in the Standard for Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings, UL 2515. Products covered by these requirements are for... | |
| 1.1 These requirements cover 60 - 250°C (140 - 482°F) single- and multiple-conductor cables for use as fixed wiring within buildings (some are also marked for direct burial) principally for... | |
| 1.1 These requirements cover 60 - 250°C (140 - 482°F) single- and multiple-conductor power-limited circuit cables for use as fixed wiring within buildings (some are also marked for direct burial)... | |
| 1.1 These requirements cover a test procedure to be used to determine the potential personal injury related to the sharpness of edges that are part of or associated with appliances... | |
| 1.1 These requirements cover adult recreational wearable devices having at least one buoyancy compartment that relies upon inflation by gas or other medium to provide flotation to the wearer, for... | |
| 1.1 These requirements cover air duct smoke detectors intended for indoor use within or protruding into a duct, or mounted in a housing with sampling tubes extending into or traversing... | |
| 1.1 These requirements cover all-thermoplastic Type MTW, 600-V, machine-tool wires and cables for use as specified in the National Electrical Code (NFPA 70), and in the National Fire Protection Association... | |
| 1.1 These requirements cover antenna rotators intended for household and commercial use on supply circuits in accordance with the National Electrical Code, NFPA 70. 1.2 An antenna rotator generally consists... | |
| 1.1 These requirements cover assemblies of wiring terminals and supporting blocks intended to provide for the connection of wiring. Compliance with these requirements does not assure that the terminal block... | |
| 1.1 These requirements cover automatic and non-automatic (manual) transfer switch equipment, operating at 600 V ac less, and intended for installation in a meter base, in ordinary locations only. 1.2... | |
| 1.1 These requirements cover automatic and non-automatic (open) type water spray nozzles for installation in accordance with the Standard for Installation of Sprinkler Systems, NFPA 13, and the Standard for... | |
| 1.1 These requirements cover automatic sprinklers including conventional, spray, sidewall, extended coverage, residential, certain specific application sprinklers and storage sprinklers including early suppression fast response (ESFR) intended for installation on... | |
| 1.1 These requirements cover automatic, non-automatic, and manual transfer switches, operating at voltages of greater than 1000 Vac, and intended for use in non-hazardous locations in accordance with Annex B,... | |
| 1.1 These requirements cover battery booster cable sets used for providing a temporary connection of a surface vehicle battery of up to 24 volts to another similar battery to provide... | |
| 1.1 These requirements cover battery chargers rated 600 volts or less and intended for household or commercial use to charge lead-acid engine-starter and other starting, lighting, and ignition (SLI) type... | |
| 1.1 These requirements cover battery chargers rated 600 volts or less. They are intended to be used in accordance with the National Electrical Code, NFPA 70, to charge industrial storage... | |
| 1.1 These requirements cover battery contactors for use in the starting systems of diesel engines driving centrifugal fire pumps, in accordance with the Standard for the Installation of Stationary Pumps... | |
| 1.1 These requirements cover battery systems as defined by this standard for use as energy storage for stationary applications such as for PV, wind turbine storage or for UPS, etc. | |
| 1.1 These requirements cover both household and industrial sewing and cutting machines to be employed in accordance with the National Electrical Code. 1.2 These requirements also cover small utilization products,... | |
| 1.1 These requirements cover buoyant cushions using unicellular plastic foam, kapok, or fibrous glass flotation material that are intended to be used in accordance with the applicable regulations of the... | |
| 1.1 These requirements cover burglar-alarm system units intended for use in residences to protect a complete multiroom residence, one room of a residence, or one opening or area in a... | |
| 1.1 These requirements cover butterfly valves intended for use in piping systems supplying water for fire-protection service. 1.2 The valves covered by these requirements are intended for installation and use... | |
| 1.1 These requirements cover cable routing assemblies and fittings and communications raceways and fittings in accordance with the NFPA 70, National Electrical Code, NFPA 76, Standard for the Fire Protection... | |
| 1.1 These requirements cover cellular metal floor raceway systems intended to be installed as an integral part of the building structure and constructed for the installation of wires and cables... | |
| 1.1 These requirements cover Class K and Class R fuses having an additional D-C rating and that are intended for use in protecting trailing cables in D-C circuits in mines... | |
| 1.1 These requirements cover closure systems for use with factory-made rigid air ducts or air connectors complying with the Standard for Factory-Made Air Ducts and Air Connectors, UL 181. Closure... | |
| 1.1 These requirements cover commercial and household electric equipment for use on or in aquariums in indoor locations at 300 volts or less, in accordance with the National Electrical Code,... | |
| 1.1 These requirements cover commercial electric cooking appliances rated 600 volts or less, intended for indoor use, and intended for use in accordance with the National Electrical Code, NFPA 70. | |
| 1.1 These requirements cover components intended for use in the manufacturer of personal flotation devices and immersion suits. Compliance with these requirements does not indicate that the product is intended... | |
| 1.1 These requirements cover components of central-station burglar-alarm systems intended and specifically designated for burglary-protection use at mercantile and banking premises, on mercantile safes, and on bank safes and vaults. | |
| 1.1 These requirements cover cord-connected electrically operated snow movers rated 250 V or less to be employed in accordance with the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements also... | |
| 1.1 These requirements cover DC photovoltaic arc-fault circuit protection devices intended for use in solar photovoltaic electrical energy systems as described in Article 690 of the National Electrical Code, NFPA... | |
| 1.1 These requirements cover devices and systems intended for use in accordance with Annex A, Ref. No. 1, to reduce the risk of electric shock to the user from accessible... | |
| 1.1 These requirements cover devices for use on stationary containers or portable LP-Gas containers that consist of a shutoff mechanism that works in conjunction with a liquid level sensing device... | |
| 1.1 These requirements cover devices intended for inter-connection of equipment, sensors, and actuators in remote-control, signaling, and power-limited circuits. Included are cable assemblies and fittings, feeder-tap cable systems, feed-through connectors,... | |
| 1.1 These requirements cover diesel engines for driving centrifugal fire pumps. 1.2 The engines covered by these requirements are intended for installation and use in accordance with the Standard for... | |
| 1.1 These requirements cover direct acting (spring loaded) and pilot operated fire pump relief valves of nominal 3/4 inch (19.05 mm) size and larger, intended for use in water supply... | |
| 1.1 These requirements cover direct-acting pressure-reducing and pressure- restricting valves intended to reduce the water pressure in standpipe systems or in the supply piping for sprinkler systems. These requirements also... | |
| 1.1 These requirements cover discharge-path resistors that are intended to be connected between the antenna and the supply circuit of a radio-, video-, or television-type appliance. The resistors are intended... | |
| 1.1 These requirements cover discrete electrical control units, communication units, transport products which manipulate the data packets, interfaces, and accessories for mass notification systems to be employed in accordance with... | |
| 1.1 These requirements cover ducted heat recovery ventilators intended to remove air from buildings, replace it with outside air, and in the process transfer heat from the warmer to the... | |
| 1.1 These requirements cover dynamic line isolation monitors and related supplementary indicating units for supervising isolated power-supply circuits in patient care areas of health care facilities, including inhalation-anestheti zing locations... | |
| 1.1 These requirements cover electric booster water heaters, electric commercial storage tank water heaters, and remote control assemblies for such heaters, rated 600 volts or less, to be employed in... | |
| 1.1 These requirements cover electric commercial, industrial, and institutional clothes-drying equipment intended for use in accordance with the National Electrical Code, NFPA 70. Equipment covered by this Standard is not... | |
| 1.1 These requirements cover electric commercial, industrial, and institutional clothes-washing equipment intended for use in accordance with the National Electrical Code. Equipment covered by this Standard is not intended for... | |
| 1.1 These requirements cover electric garment finishing appliances rated 250 V or less for household and commercial use, in accordance with the National Electrical Code, NFPA 70. 1.2 These requirements... | |
| 1.1 These requirements cover electric personal grooming appliances intended for use by qualified personnel in commercial establishments such as beauty parlors, barber shops, or cosmetic studios. These appliances include hair... | |
| 1.1 These requirements cover electrical cables consisting of one or more current-carrying copper, aluminum, or copper-clad aluminum conductors with or without either or both grounding conductor(s), and one or more... | |
| 1.1 These requirements cover electrical cables for boats. The cables are intended for use in marine pleasure craft and consist of a single insulated conductor without a jacket or of... | |
| 1.1 These requirements cover electrical controls that are complete in construction and designed specifically for installation in North America. These products are intended to be installed within the guidelines and... | |
| 1.1 These requirements cover electrical energy storage assemblies such as battery packs and combination battery pack-electrochemical capacitor assemblies and the subassembly/modules that make up these assemblies for use in electric-powered... | |
| 1.1 These requirements cover electrical equipment used for the control and monitoring of flammable liquid and LP-Gas dispensing devices rated 600 volts or less. Such control equipment is intended to... | |
| 1.1 These requirements cover electrical power and control cables consisting of either two or more current-carrying copper, aluminum, or copper-clad aluminum circuit conductors, or one or more pairs of thermocouple-extensi... | |
| 1.1 These requirements cover electrical, electronic, and electromechanical commercial amusement and gaming machines and accessories that are intended to be used in accordance with the National Electrical Code, NFPA 70. | |
| 1.1 These requirements cover electrically operated equipment marked "Double Insulation" or "Double Insulated" to be used in accordance with the National Electrical Code, ANSI/NFPA 70. 1.2 Equipment marked "Double Insulation"... | |
| 1.1 These requirements cover electrically operated gas detectors intended for installation in residential occupancies and recreational vehicles (RVs). 1.2 These requirements cover gas detectors intended to detect flammable gases such... | |
| 1.1 These requirements cover electrically operated single and multiple station carbon monoxide (CO) alarms intended for protection in ordinary indoor locations and unconditioned areas, per applicable governing laws, codes, and... | |
| 1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations and portable smoke alarms used as "travel" alarms in accordance... | |
| 1.1 These requirements cover electrically operated smoke detector monitors intended to be used in ordinary indoor locations in accordance with the National Electrical Code, NFPA 70; the Life Safety Code,... | |
| 1.1 These requirements cover electrically-operate d visual signaling appliances, rated 300 volts or less, and intended for indoor locations, outdoor locations, or both, in accordance with the National Electrical Code,... | |
| 1.1 These requirements cover electrically-operate d, cord-connected photographic equipment rated 300V or less, and permanently connected photographic equipment rated 600 volts or less, intended for household or commercial use on... | |
| 1.1 These requirements cover electromagnetic interference (EMI) filters installed on, or connected to, 1,000 V or lower potential circuits, 50 - 60 Hz, or up to 1,500 Vdc, and installed... | |
| 1.1 These requirements cover emergency-signaling devices for the hearing impaired. The devices and/or systems covered by this standard are suitable for use in a controlled environment, or in an uncontrolled... | |
| 1.1 These requirements cover enclosed and open-type Surge Protective Devices (SPDs) designed for repeated limiting of transient voltage surges as specified in the standard on 50 or 60 Hz power... | |
| 1.1 These requirements cover equipment and materials intended for installation and use in flammable anesthetizing locations where accumulation of static electricity presents a risk of fire or explosion due to... | |
| 1.1 These requirements cover equipment connected to or used with plumbing in commercial or household locations. Examples of equipment covered by these requirements are irrigation equipment, sprinkler controls, pedicure spas,... | |
| 1.1 These requirements cover equipment intended for use indoors in an automotive repair facility. Products covered by this standard are as indicated in 2. This equipment is intended to be... | |
| 1.1 These requirements cover equipment intended to quench arcing faults by creating a lower impedance current path, located within a controlled compartment, to cause the arcing fault to transfer to... | |
| 1.1 These requirements cover EV plugs, EV receptacles, vehicle inlets, vehicle connectors, and EV breakaway couplings, rated up to 800 amperes and up to 1000 volts ac or 1500 V... | |
| 1.1 These requirements cover explosionproof and dust-ignitionproof electrical equipment for installation and use in hazardous (classified) locations, Class I, Division 1, Groups A, B, C, and D, and Class II,... | |
| 1.1 These requirements cover factory-built 1400 degree Fahrenheit chimneys intended for venting gas, liquid, and solid-fuel-fired appliances in which the maximum continuous flue-gas temperatures do not exceed 1400°F (760°C). 1.2... | |
| 1.1 These requirements cover factory-built chimneys intended for venting gas, liquid, and solid-fuel fired residential-type appliances and building heating appliances in which the maximum continuous flue-gas outlet temperatures do not... | |
| 1.1 These requirements cover factory-built fireplaces, including the fire chamber, chimney, roof assembly, and other related parts that are entirely factory-made and that are intended for unit assembly in the... | |
| 1.1 These requirements cover factory-built grease ducts, and grease duct assemblies that are intended to be installed at reduced clearances where 18 inch (457 mm) clearance is specified in the... | |
| 1.1 These requirements cover fast operating devices intended to interrupt currents associated with arcing faults, having interrupting times faster than conventional overcurrent devices. 1.2 These requirements cover open type devices... | |
| 1.1 These requirements cover fire test methods to evaluate the performance of metallic and nonmetallic roof deck constructions subjected to internal (under deck) fire exposures for the purpose of determining... | |
| 1.1 These requirements cover fittings to be used in tubing carrying: a) Fuel gases such as acetylene, liquefied petroleum gas (LP-gas), manufactured and natural fuel gases, and other liquefied and... | |
| 1.1 These requirements cover fixed and location-dedicated electric room heating equipment rated 600 volts or less to be employed in ordinary locations in accordance with the National Electrical Code, ANSI/NFPA... | |
| 1.1 These requirements cover fixed electric duct heaters, and remote control assemblies for such equipment, rated at 600 volts or less to be employed in ordinary locations in accordance with... | |
| 1.1 These requirements cover flat-plate photovoltaic modules and panels intended for installation on or integral with buildings, or to be freestanding (that is, not attached to buildings), in accordance with... | |
| 1.1 These requirements cover flexible aluminum, and steel and stainless-steel conduit designed for use as metal raceway for wires and cables in accordance with the National Electrical Code, NFPA 70. | |
| 1.1 These requirements cover floor proximity and other egress path marking and lighting systems that provide a visual delineation of the path of egress. These systems are also used to... | |
| 1.1 These requirements cover flyback transformers, high-voltage multipliers, deflection yokes and picture-tube high-voltage-neck components intended to be employed in television-type appliances. 1.2 High voltage is defined as a potential equal... | |
| 1.1 These requirements cover foam producing equipment and liquid concentrates employed for the production and discharge of foam that has an expansion ratio of 20:1 or less and is used... | |
| 1.1 These requirements cover fuel cell power systems intended to be installed in Type E, Type CGH, Type CGH-EE, Type CHG-ES, or Type CGH-EX industrial trucks used in locations as... | |
| 1.1 These requirements cover fusing resistors and temperature-limited resistors to be employed in radio- and television-type appliances. These requirements also apply to resistor mounting assemblies intended for use with such... | |
| 1.1 These requirements cover gate valves intended for installation in piping systems supplying water for fire-protection service. Gate valves covered by these requirements are of the outside-screw-and-yo ke type or... | |
| 1.1 These requirements cover glass-tube fuses intended for the protection of automotive wire and automotive apparatus. 1.2 These requirements do not cover glass-tube fuses intended for use in circuits rated... | |
| 1.1 These requirements cover ground-fault current sensing devices, relaying equipment, or combinations of ground-fault current sensing devices and relaying equipment or equivalent protection equipment for use in ordinary locations that... | |
| 1.1 These requirements cover hand-held torches of the air aspirating type for operations such as heating, soldering, and brazing. 1.2 Torches covered by these requirements are intended to operate on... | |
| 1.1 These requirements cover hoists of the overhead type intended for material lifting service using either chain, wire rope, or fibre kernmantle rope. They are intended to be suspended from... | |
| 1.1 These requirements cover hose and hose assemblies in sizes up to and including a nominal internal diameter of 4 in (102 mm) for conveying liquefied petroleum gas (LP-Gas) intended... | |
| 1.1 These requirements cover hose nozzle valves that are intended to be used for the control of flammable and combustible liquids. They are of the type used in motor fuel... | |
| 1.1 These requirements cover hose nozzle valves that are intended to be used for the control of motor fuels as indicated in 2. They are of the type used in... | |
| 1.1 These requirements cover household and commercial air compressors, vacuum pumps, inflators (both compressor-type and blower-type inflators), paint sprayers, paint mixers, and paint pigment dispensers intended for indoor or outdoor... | |
| 1.1 These requirements cover household and commercial air fresheners and deodorizers, rated 250 volts or less for use in ordinary locations in accordance with the National Electrical Code, ANSI/NFPA 70. | |
| 1.1 These requirements cover household electric cooking and food serving appliances, rated at 250 V or less, other than those mentioned in 2, for use in ordinary locations, including appliances... | |
| 1.1 These requirements cover household electric products having personal hygienics or health care applications, such as hydromassage units, contact lens disinfectors and cleaners, and toothbrushes, rated at 250 V or... | |
| 1.1 These requirements cover household electric storage tank and small capacity storage tank water heaters rated no more than 600 volts and 12 kilowatts to be installed in accordance with... | |
| 1.1 These requirements cover household-type cooking utensils known as pressure cookers or pressure sauce pans which operate at a nominal pressure of 15 psig (103 kPa) or less. They are... | |
| 1.1 These requirements cover immersion suits intended for United States Coast Guard (USCG) approval under 46 CFR 160.171. 1.2 The suits covered by these requirements are intended to reduce the... | |
| 1.1 These requirements cover indoor and outdoor use Class 2 power supplies and battery chargers. These units utilize an isolating transformer and may incorporate components to provide an alternating- or... | |
| 1.1 These requirements cover indoor fixed electric heating systems for use on system voltages not exceeding 600 V. 1.2 The heating systems covered by this Standard are intended for installation... | |
| 1.1 These requirements cover indoor use cord and plug connected, relocatable power taps (RPT) rated 250 V AC or less and 20 Amperes or less. A RPT may include an... | |
| 1.1 These requirements cover indoor-use cord-and-plug-connec ted Health Care Facility receptacle outlet assemblies (HCOA) rated 250 V AC or less and 20 Amperes or less. HCOA are for use as... | |
| 1.1 These requirements cover insect-electrocution equipment of the household and commercial types with an input rating of 250 V or less and are intended for use in ordinary locations in... | |
| 1.1 These requirements cover inverters, converters, charge controllers, and interconnection system equipment (ISE) intended for use in stand-alone (not grid-connected) or interactive (grid-connected) power systems. Interactive inverters, converters, and ISE... | |
| 1.1 These requirements cover isolated power systems equipment rated 600 Vac or less, intended for installation and use in nonhazardous areas in health care facilities in accordance with the requirements... | |
| 1.1 These requirements cover lined interior standpipe fire hose in the 1-1/2 and 2-1/2 inch sizes that is intended: a) For fire-protection purposes only; b) For use with inside standpipes... | |
| 1.1 These requirements cover liquefied petroleum gas (LP-Gas) vaporizers of the stationary type. 1.2 Vaporizers covered by these requirements are intended to be installed and used in accordance with the... | |
| 1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 - 4 (12 - 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated) constructions. | |
| 1.1 These requirements cover manual and power-operated type portable hoists intended for use with scaffolds suspended by wire ropes. 1.2 This standard covers electrically powered hoists rated 1000 volts or... | |
| 1.1 These requirements cover manually, electrically and pneumatically powered lifts. They are intended for the lifting and transport of materials and not for the movement or support of people. They... | |
| 1.1 These requirements cover marine buoyant vests that use kapok, fibrous glass, or unicellular polyvinyl chloride or polyethylene foam flotation material, and are intended to be used in accordance with... | |
| 1.1 These requirements cover mechanical type accessories that are typically intended for attachment to storage tanks or connecting pipe for flammable and combustible liquids in commercial (public) or private (fleet)... | |
| 1.1 These requirements cover metal, non-metallic, and a combination of metal and non-metallic receptacles intended primarily for temporary, indoor storage of waste paper and other similar materials. These containers are... | |
| 1.1 These requirements cover metal-enclosed low-voltage power circuit breaker switchgear assemblies containing but not limited to such devices as low-voltage power circuit breakers, other interrupting devices, switches, control, instrumentation and... | |
| 1.1 These requirements cover metal-sheathed heating elements intended for use in appliances and equipment that comply with the requirements for such appliances and equipment. 1.2 These requirementsThe main body of... | |
| 1.1 These requirements cover motor-operated massage and exercise machines, such as vibrators, exercise bicycles, vibrating and massaging chairs, and the like, are to be employed in accordance with the National... | |
| 1.1 These requirements cover movable and wall- or ceiling-hung electric room-heating equipment rated 600 volts or less to be employed in ordinary locations in accordance with the National Electrical Code,... | |
| 1.1 These requirements cover non-enclosed and enclosed pullout switches of the detachable type. 1.2 These requirements cover pullout switches rated 600 V or less, 400 A or less, with or... | |
| 1.1 These requirements cover nonducted, stationary or fixed heat recovery ventilators for household, commercial, or industrial use and intended to be employed in accordance with the National Electrical Code, ANSI/NFPA... | |
| 1.1 These requirements cover nonelectrical refrigerant-containi ng components and accessories, intended for field installation in accordance with the Safety Code for Mechanical Refrigeration, ASHRAE 15, in refrigeration systems, air conditioning... | |
| 1.1 These requirements cover nonmetallic underground High Density Polyethylene (HDPE) conduit with conductors. These products consist of a factory assembly of conductors or cables inside a coilable, smooth-wall, continuous length... | |
| 1.1 These requirements cover nonrefillable (disposable) aerosol type metal container assemblies, charged with a commercial grade hydrocarbon fuel gas (primarily butane), constructed, charged, and marked in accordance with Code of... | |
| 1.1 These requirements cover office furnishing panels, study carrels, work stations, and pedestal-style systems that form an office furnishing system in accordance with the National Electrical Code, ANSI/NFPA 70. These... | |
| 1.1 These requirements cover optical isolators, also called optical couplers or photocouplers: a) Intended to provide unidirectional signal transfer between dielectrically isolated circuits and, b) Intended for use in equipment... | |
| 1.1 These requirements cover parts cleaners used for cleaning or removing grease and similar substances from the item contaminated. 1.2 These requirements cover electrically operated parts cleaners rated up to... | |
| 1.1 These requirements cover parts made of polymeric materials that are used in electrical equipment and describe the various test procedures and their use in the testing of such parts... | |
| 1.1 These requirements cover permanently installed devices, hereafter referred to as dimmers, that employ a dimming function intended for control of lighting loads of the magnetic ballast, transformer, electronic ballast,... | |
| 1.1 These requirements cover permanently installed electric water heaters, rated 600 volts or less, for heating the water supplied through plumbing to separately heated public or private pools or tubs,... | |
| 1.1 These requirements cover polyvinyl chloride (PVC) pressure pipe, machined couplings, fabricated fittings and gaskets and oriented polyvinyl chloride (PVCO) pressure pipe and gaskets for use in underground fire protection... | |
| 1.1 These requirements cover portable and fixed electric baseboard heating equipment rated at 600 volts or less, to be employed in ordinary locations in accordance with the National Electrical Code,... | |
| 1.1 These requirements cover portable and movable power packs provided with one or more batteries, electrochemical capacitors, or electrochemical capacitor modules. If provided with a battery, the battery shall be... | |
| 1.1 These requirements cover portable electric coffee makers, percolators, coffee urns, and other brewing-type appliances rated 120 V or less, for use in ordinary locations in accordance with the National... | |
| 1.1 These requirements cover portable electric household skillets and other frying-type appliances, rated at 125 V or less, for use in ordinary locations in accordance with the National Electrical Code,... | |
| 1.1 These requirements cover portable luminaires and subassemblies whose primary function is task or ambient illumination. These products are intended for use in accordance with the National Electrical Code, ANSI/NFPA... | |
| 1.1 These requirements cover portable power-distribution equipment rated 600 volts or less and 1600 amperes maximum. They are intended for either single- or multi-phase supply and are intended to distribute... | |
| 1.1 These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or... | |
| 1.1 These requirements cover portable vehicle battery adapters rated 24 V dc or less that are intended to be supplied from a vehicle cigarette lighter receptacle or power outlet. Vehicle... | |
| 1.1 These requirements cover portable, stationary, and fixed high-pressure cleaning machines in which the discharge line is hand supported and manipulated, and intended for household, farm, or commercial/industria l applications. | |
| 1.1 These requirements cover portable, stationary, and fixed power units having an input rating of 600 volts or less, direct- and alternating- current, with at least one output not marked... | |
| 1.1 These requirements cover positive displacement liquid meters for use with motor fuels. Motor fuels, as defined by these requirements, include one or more of the fuels described in 2. | |
| 1.1 These requirements cover power outlets, with or without integral mounting posts or pedestals, and power outlet fittings for use in accordance with the National Electrical Code, NFPA 70. 1.2... | |
| 1.1 These requirements cover pressure regulators for use with LP-Gas equipment. NOTE: For the purposes of this standard the terms “LP-Gas” and “Propane” are interchangeable. 1.2 Regulators covered by these... | |
| 1.1 These requirements cover pressure relief valves intended for use in sprinkler systems for fire protection service to relieve excessive pressures caused by thermal expansion, downstream of a pressure reducing... | |
| 1.1 These requirements cover pressure-sensitive tapes, mastic systems, and non-metallic mechanical fasteners for use as a part of the closure system of factory-made flexible air ducts or air connectors complying... | |
| 1.1 These requirements cover primary (nonrechargeable) and secondary (rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium... | |
| 1.1 These requirements cover primary, secondary, and coaxial types of aboveground pipes intended for transfer and containment of specific flammable and combustible liquids and fuels or fuel components (and vapors... | |
| 1.1 These requirements cover processed solid-fuel firelogs that are intended for use as an alternative fuel in factory-built fireplaces and masonry fireplaces. 1.2 These requirements also cover processed solid-fuel fire... | |
| 1.1 These requirements cover products which are molded of insulating material and are intended to cover the outlet slots of receptacles having 1-15R and 5-15R configurations in accordance with Wiring... | |
| 1.1 These requirements cover quick-connect type and other hand-operated adapters and couplings intended to connect the cylinder valve on portable LP-Gas container assemblies to the inlet of the regulator on... | |
| 1.1 These requirements cover rack mounting systems, mounting grounding/bonding devices, and clamping/retention devices for specific (manufacturer/model designation) flat-plate photovoltaic modules and panels that comply with the Standard for Flat-Plate Photovoltaic... | |
| 1.1 These requirements cover refrigerant recovery and recycling equipment to be employed in accordance with the National Electrical Code, NFPA 70 and include battery operated equipment. 1.2 These requirements apply... | |
| 1.1 These requirements cover relocking devices for the following: a) Light vault doors, b) Heavy vault doors, and c) Safes or chests. 1.2 Relocking devices are intended to relock the... | |
| 1.1 These requirements cover robots and robotic equipment rated 600 V or less and intended for installation in accordance with the National Electrical Code, NFPA 70. Equipment evaluated to these... | |
| 1.1 These requirements cover room heaters which are freestanding fire chamber assemblies of the circulating or direct radiation type. These products are for attachment to a residential type chimney intended... | |
| 1.1 These requirements cover shatter containment mechanisms for lamps, for use in food establishments, that are intended to prevent contamination of food. 1.2 Types of lamps covered by these requirements... | |
| 1.1 These requirements cover shut-off valves, with or without relief valve, that are for use on cylinders that comply with the specifications and charging and maintenance regulations of the U.S. | |
| 1.1 These requirements cover shutoff valves for trim and drain purposes for fire protection service. This standard covers valve constructions such as ball valves, butterfly valves, globe valves and plug... | |
| 1.1 These requirements cover signaling devices intended for emergency or non-emergency use, used in indoor and/or outdoor locations, and where applicable, installed and used in accordance with the National Electrical... | |
| 1.1 These requirements cover single and multiple optical-fiber cables for control, signaling, and communications, rated a minimum of 60°C, as described in Article 770 and other applicable parts of the... | |
| 1.1 These requirements cover single and multipole connectors, intended for factory assembly to copper or copper alloy conductors or printed wiring boards, for use in data, signal, control and power... | |
| 1.1 These requirements cover single- and multiple-jacketed lined fire hose with or without couplings attached, in the trade sizes of 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 2-3/4, 3, 3-1/2, 4, 4-1/2,... | |
| 1.1 These requirements cover single-phase or three-phase, dry-type, distribution transformers, including solid cast and resin encapsulated transformers. The transformers are provided with either ventilated or non-ventilated enclosures and are rated... | |
| 1.1 These requirements cover solid state automatic transfer switches intended for use in ordinary locations to provide for lighting and power only in optional stand-by systems in accordance with Article... | |
| 1.1 These requirements cover solid state speed controls rated 300 volts or less, single phase, intended to be connected to 15 - 20 ampere branch circuits and intended to be... | |
| 1.1 These requirements cover solvent distillation units, with a maximum capacity of 60 gallons (227 l), used for recycling flammable or combustible liquids as indicated in the instruction manual provided... | |
| 1.1 These requirements cover speakers for indoor and/or outdoor use in dry, damp, wet, or underwater locations and are intended for one or more of the following: a) Commercial and... | |
| 1.1 These requirements cover special purpose steel aboveground tanks for specific fuels or liquids and/or use applications as indicated for each special purpose tank type, which are intends to address... | |
| 1.1 These requirements cover special types of fuses not covered by separate requirements and that are for use in radio- and television-type appliances where they are relied upon to limit... | |
| 1.1 These requirements cover stage and studio luminaires rated 600 volts or less for use in theaters, studios, and similar locations in accordance with Articles 520 and 530 of the... | |
| 1.1 These requirements cover station inlets and outlets intended for use in hospitals for distribution of nonflammable medical gas in rigid piping systems in accordance with the Standard for Health... | |
| 1.1 These requirements cover stationary engine generator assemblies that are intended for installation and use in ordinary locations in accordance with the following: a) The National Electrical Code, NFPA 70; | |
| 1.1 These requirements cover steel electrical intermediate metal conduit (IMC), nipples, elbows, and couplings. This conduit is provided in trade sizes 1/2 - 4 (16 - 103), for use as... | |
| 1.1 These requirements cover steel primary, secondary and diked type atmospheric storage tanks intended for the storage of noncorrosive, stable flammable and combustible liquids with a specific gravity (spg) not... | |
| 1.1 These requirements cover submetering equipment and open and enclosed type current sensors intended for factory or field installation within the wiring space of enclosures for switches or overcurrent devices. | |
| 1.1 These requirements cover telecommunications-c ircuit accessories, such as jack and plug assemblies, quick-connect terminal assemblies, telephone wall plates, telephone extension cords, cross-connect terminal-block assemblies, maintenance terminal modules, terminal enclosures,... | |
| 1.1 These requirements cover temporary lighting strings rated not more than 20 A, 125 V, intended for indoor and outdoor use to provide temporary illumination during the period of construction,... | |
| 1.1 These requirements cover termination boxes rated 6001000 V or less that consist of lengths of bus bars, terminal strips, or terminal blocks with provision for wire connectors to accommodate... | |
| 1.1 These requirements cover test procedures to be used in the evaluation of Class 120(E) or higher electrical insulation systems (EIS) for use in the United States, and Class 130(B)... | |
| 1.1 These requirements cover tests of opaque and clear organic coatings intended for application to exterior and interior surfaces of steel enclosures of outdoor-use electrical equipment for protection of the... | |
| 1.1 These requirements cover the construction and operation of fixed pre-engineered and engineered dry chemical fire extinguishing system units and fixed automatic extinguisher units intended to be useddesigned, installed, inspected,... | |
| 1.1 These requirements cover the construction and operation of halocarbon clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard on... | |
| 1.1 These requirements cover the construction and operation of inert gas clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard... | |
| 1.1 These requirements cover the construction and operation of water-based automatic extinguisher units intended for total flooding applications when installed, inspected, tested, and maintained in accordance with the manufacturer’s instructions. | |
| 1.1 These requirements cover the construction and performance of Grooved and Plain End fittings intended to be joined to pipe or another fitting by couplings complying with the requirements of... | |
| 1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable carbon-dioxide fire extinguishers. Carbon-dioxide fire extinguishers are intended to be utilized in accordance with... | |
| 1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable halocarbon clean agent fire extinguishers. Halocarbon clean agent fire extinguishers are intended to be... | |
| 1.1 These requirements cover the construction and security of equipment intended to automatically dispense currency when operated as intended by an authorized customer, and to provide a limited degree of... | |
| 1.1 These requirements cover the design and construction details of tin-clad fire doors which when so fabricated have demonstrated in fire tests conducted in accordance with the Standard for Fire... | |
| 1.1 These requirements cover the design, manufacture, implementation, and support of automation system units and accessories intended to be used in central-stations and proprietary stations for the reception, processing, dispatch,... | |
| 1.1 These requirements cover the following devices intended for installation and operation on horizontal and vertically opening hoistway doors and gates and car doors and gates in accordance with the... | |
| 1.1 These requirements cover the following; a) Wood, metal, or a combination of wood and metal fabricated planks; b) Fabricated platforms for use with suspended, fixed, or rolling scaffold; c)... | |
| 1.1 These requirements cover the individual unit employed to form assisted and independent living emergency call systems (ECS) intended to provide audible and visual signaling between residents and assisted and... | |
| 1.1 These requirements cover the individual units that comprise a home health care system intended for use in ordinary indoor residential locations. 1.2 These requirements also cover a complete home... | |
| 1.1 These requirements cover the investigation of air leakage through door assemblies and other opening protectives (hereafter also referred to as test sample) installed in wall openings where air leakage... | |
| 1.1 These requirements cover the investigation of products such as, but not limited to, sleeve, wrap or spray-on type fire protection systems of various materials and construction intended to protect... | |
| 1.1 These requirements cover the performance of and methods for testing hydrants intended for use in piping systems supplying water for fire-protection service. 1.2 Hydrant types covered by this standard... | |
| 1.1 These requirements cover the performance of pipe hanger equipment for use in supporting piping employed in sprinkler systems, water-spray systems, and other piping systems used for fire-protection service. 1.2... | |
| 1.1 These requirements cover the shielded and nonshielded medium-voltage power cables that are described in (single-conductor) and (multiple-conductor) . Multiple-conductor cables may include one or more individually jacketed non-conductive optical-fiber... | |
| 1.1 These requirements cover the test methods for measuring the fire performance of sheet plastics used in semi-conductor wet bench tool construction. 1.2 Plastic materials that are classified as Class... | |
| 1.1 These requirements cover the test procedure applicable to the fire-resistance classification of doors intended for the protection of openings of vaults and file rooms. 1.2 Recommendations for record protection... | |
| 1.1 These requirements cover through penetration firestops of various materials and construction that are intended for use in openings in fire resistive wall, floor or floor-ceiling assemblies, and membrane type... | |
| 1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. | |
| 1.1 These requirements cover trash compactors that are rated 250 V or less and intended for household use to reduce the volume of waste prior to disposal; and that are... | |
| 1.1 These requirements cover Type II, Type III, and Type IV marine buoyant devices, including vests, jackets, horseshoe buoys and ring buoys, with or without lifelines, intended for recreational use,... | |
| 1.1 These requirements cover Type ITC instrumentation control cables consisting of two or more current-carrying copper or thermocouple alloy conductors with or without either or both: a) Grounding conductor(s), bare... | |
| 1.1 These requirements cover Type MC-HL metal-clad cable for use in hazardous (classified) locations, Class I, Division 1, Groups A, B, C, and D; Class II, Division 1, Groups E,... | |
| 1.1 These requirements cover unit substations of 1000 kVA single phase and 3000 kVA 3-phase maximum having a maximum nominal primary or secondary rating of 600 volts. Their construction, installation,... | |
| 1.1 These requirements cover valve equipment intended for installation in piping systems to supply water automatically to dry pipe, deluge, and pre-action sprinkler systems for fire-protection service. 1.2 Valves covered... | |
| 1.1 These requirements cover valve regulated or vented batteries with aqueous electrolytes that can be used in various applications including stationary applications such as instrument batteries, enclosed batteries, emergency lighting... | |
| 1.1 These requirements cover venting systems intended for venting Category II, III, or IV gas-burning appliances as defined by the Standard for Gas-Fired Central Furnaces (except Direct-Vent Central Furnaces), ANSI... | |
| 1.1 These requirements cover video and audio equipment operated and maintained by trained personnel under the conditions of controlled access. 1.2 These requirements cover such equipment as video tape recorders,... | |
| 1.1 These requirements cover walk-behind gasoline-engine-powe red, ground-supported edgers and edger-trimmers that employ rigid cutting members, the diameter of which is not more than 12 in (305 mm). 1.2 These... | |
| 1.1 These requirements cover wearable buoyant devices having: a) At least one compartment that relies upon inflation by gas or other medium to provide buoyancy, and b) A quantity of... | |
| 1.1 These requirements cover wire binding screw terminals of receptacles and switches rated 15 or 20 A intended for use with solid conductor aluminum building wire, and that require direct... | |
| 1.1 These requirements cover wiring systems for use in outdoor locations, field-installed wiring assemblies using off-site manufactured subassemblies for branch circuits, remote-control circuits, signaling circuits, and communication circuits in accessible... | |
| 1.1 These requirements cover: a) Discrete electrical products for rescue assistance two-way emergency communication systems, e.g. remote communications stations, master control units and accessories. b) Electrically- and electronically-opera ted amplifiers... | |
| 1.1 These requirements cover: a) General purpose and power transformers of the air-cooled, dry, ventilated, and nonventilated types to be used in accordance with the National Electrical Code, ANSI/NFPA 70. | |
| 1.1 These requirements cover: a) Meters for flammable and combustible liquids, of the type and size commonly used in the assembly of motor fuel dispensing devices; and b) Meters for... | |
| 1.1 These requirements specify a needle-flame test to simulate the effect of small flames which may result from fault conditions within equipment in order to assess the fire hazard by... | |
| 1.1 These tests are applicable to joint systems of various materials and construction that are intended for use in linear openings between adjacent fire resistive structures. 1.2 The fire endurance... | |
| 1.1 This document provides guidance in the preparation of control drawings for intrinsically safe apparatus, associated apparatus, and intrinsically safe systems. 1.2 This document is intended to be used in... | |
| 1.1 This document provides specific requirements for process sealing between electrical systems and flammable or combustible process fluids where a failure could allow the migration of process fluids directly into... | |
| 1.1 This is a fire test for determining values of flame propagation height for electrical and optical-fiber cables that are for installation vertically in shafts or in vertical runs that... | |
| 1.1 This is a fire test method for determining the fire performance response of discrete products (including, but not limited to electrical, mechanical, and plumbing equipment) intended to be installed... | |
| 1.1 This is a test method for determining values of flame propagation distance and optical smoke density for individual pairs of plastic plumbing pipes for distribution of potable water, water... | |
| 1.1 This is a test method for determining values of flame propagation distance and optical smoke density for plastic sprinkler pipe that is to be installed in ducts, plenums, and... | |
| 1.1 This is a test method for determining values of flame propagation distance and optical smoke density for pneumatic tubing that is to be installed in ducts, plenums, and other... | |
| 1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of... | |
| 1.1 This Part is intended to be read together with the Standard for Low-Voltage Fuses - Part 1: General Requirements, hereafter referred to as Part 1. The titles of the... | |
| 1.1 This recommended practice identifies elements of certificates for equipment for hazardous (classified) locations. NOTE 1: The recommended practice can be used for equipment under either the Division or Zone... | |
| 1.1 This recommended practice provides guidance to the owner/operator of hazardous (classified) locations for the use of portable/personal electronic products in Class I, Division 2; Class I, Zone 2; Class... | |
| 1.1 This security evaluation standard applies to the evaluation of security and life safety signaling system components. It applies to, but is not limited to, the following products: a) Alarm... | |
| 1.1 This security evaluation standard applies to the testing of network connectable components of healthcare systems. It applies to, but is not limited to, the following key components: a) Medical... | |
| 1.1 This Standard applies to conductive electric vehicle (EV) supply equipment with a primary source voltage of 1000 V ac or less, with a frequency of 50 or 60 Hz,... | |
| 1.1 This Standard applies to corrugated electrical nonmetallic tubing (ENT) and mechanically-attache d fittings, for use in accordance with C22.1, Canadian Electrical Code, Part I (CE Code), NFPA 70, National... | |
| 1.1 This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian... | |
| 1.1 This Standard applies to electric clothes dryers intended to be used in nonhazardous locations in accordance with CSA C22.1, Canadian Electrical Code, Part I (CE Code, Part I) and... | |
| 1.1 This standard applies to fixed, portable and transportable toxic and combustible gas and vapor detectors and sensors intended for use in ordinary (non-hazardous) locations for use in indoor or... | |
| 1.1 This standard applies to flashlights and lanterns powered by secondary (rechargeable) batteries and general purpose primary (non-rechargeable) batteries with a maximum voltage of 75 V d.c. The terms flashlights... | |
| 1.1 This Standard applies to form wound rotating electrical machines rated less than 460 volts and all other rotating electrical machines and linear motors, both AC and DC, rated 1,000... | |
| 1.1 This Standard applies to low-voltage fuses rated 1000 V or less, AC and/or DC, with interrupting ratings up to 300 kA (200 kA for Mexico). These fuses are intended... | |
| 1.1 This Standard applies to luminaires for use in non-hazardous locations and that are intended for installation on branch circuits of 600 V nominal or less between conductors in accordance... | |
| 1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, floor sweepers, and to household use floor finishing machines to be employed in accordance with C22.1, C22.2 No. 0,... | |
| 1.1 This standard applies to network-connectable products that shall be evaluated and tested for vulnerabilities, software weaknesses and malware. 1.2 This standard describes: a) Requirements regarding the software developer (vendor... | |
| 1.1 This Standard applies to nonmetallic or composite mechanical protection tubing (MPT), and nonmetallic, composite or metallic fittings, and clamps used for the support, routing and mechanical protection of conductors,... | |
| 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which... | |
| 1.1 This Standard applies to reflector kits that consist of one or more components that are intended to be installed in fluorescent luminaires sometime after the initial installation of the... | |
| 1.1 This standard applies to the following types of transfer switches that have a maximum rating of 1000 volts for use in non-hazardous locations, in accordance with Annex A1, Item... | |
| 1.1 This Standard applies to visual signaling devices intended for indoor and/or outdoor installation: a) In Canada only: in accordance with CSA C22.1, Canadian Electrical Code, Part I, Safety Standard... | |
| 1.1 This Standard contains requirements for single and multi - layer insulated winding wire used in transformers without interleaved insulation; and solid insulation and insulated winding wire without interleaved insulation... | |
| 1.1 This Standard contains requirements for water mist nozzles for use with water mist fire-protection systems intended for the protection of residential, light and ordinary hazard areas as well as... | |
| 1.1 This standard contains specific details of the conductors, of the insulation, of the jackets and other coverings, and of the methods of sample preparation, of specimen selection and conditioning,... | |
| 1.1 This standard contains test procedures and methods to evaluate refrigerants and mark their containers according to the extent of the refrigerant's flammability with regard to their intended use as... | |
| 1.1 This standard covers backwater prevention systems that use sensors, controls and mechanisms for the prevention of backflow for sanitary drainage and storm systems and specifies minimum requirements for materials,... | |
| 1.1 This Standard covers commercial and industrial plant oil extraction equipment for installation and use indoors in an ordinary (unclassified) locations and hazardous (classified) locations. Hazardous locations are also referred... | |
| 1.1 This Standard covers flexible sprinkler hose with fittings intended for direct connection to fire sprinklers in installations requiring a flexible attachment to the sprinkler system piping such as clean... | |
| 1.1 This standard covers industrial and commercial metalworking and woodworkingmanual and semi-automatic metal sawing machines, either manual or semiautomatic, that use a saw blade (tool) to cut off or change... | |
| 1.1 This standard covers multi-point interconnection power cable assemblies. They may consist of power cable assemblies, male or female power cable fittings, panel-mounted power cable/conductor fittings and feeder-tap power cable... | |
| 1.1 This Standard covers quick opening devices intended for attachment to dry pipe valves to reduce the time delay in operation of the valve following opening of one or more... | |
| 1.1 This Standard covers requirements for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems. For the purpose of this Standard cabinet, enclosure and rack systems are all... | |
| 1.1 This Standard covers requirements for corrosion control additives for fire sprinkler systems, such as corrosion inhibitors. 1.2 These solutions are intended for use in wet pipe sprinkler systems for... | |
| 1.1 This standard covers requirements for the performance of antifreeze solutions for fire sprinkler systems. 1.2 These solutions are intended for use in wet pipe sprinkler systems subject to freezing... | |
| 1.1 This Standard covers requirements for vapor corrosion inhibitors and their delivery system for use in fire sprinkler systems. 1.2 These corrosion inhibitors are intended for use in dry pipe... | |
| 1.1 This standard covers rubber gasketed fittings intended for assembling sections of pipe in fire protection systems, for example, couplings to attach pipe sections end to end, and side outlets... | |
| 1.1 This Standard covers single-conductor, nonshielded cables rated 5000 or 8000 volts, 90°C, described in that are intended solely for use as factory-installed wiring in equipment (internal wiring), in industrial... | |
| 1.1 This standard covers solid-state overcurrent protectors. These devices are solid-state switches that limit the output current to a safe level when the output load exceeds the current-limit threshold or... | |
| 1.1 This standard covers the basic elements of a Third Party Certification and Inspection Program for various types of portable fire extinguishers, hand and wheeled, including the following: carbon dioxide,... | |
| 1.1 This Standard covers the electrical safety of electricity meters rated up to 600 VAC, which measure, monitor, record, transmit, or receive electrical energy generation or consumption information. 1.2 Meters... | |
| 1.1 This Standard covers the electrical system of eBikes powered by a lithium-based, rechargeable battery. EBikes include both Electrically Power Assisted Cycle (EPAC - pedal assist) and non-pedal assist eBikes. | |
| 1.1 This Standard covers the sorting and grading process of battery packs, modules and cells and electrochemical capacitors that were originally configured and used for other purposes, such as electric... | |
| 1.1 This standard defines a method to determine video camera digital image quality ratings through a series of performance based tests that are conducted on production camera units. 1.2 The... | |
| 1.1 This Standard describes a full-scale test method for measuring the thermal resistance of protective materials, systems, or constructions to rapid-temperature-ri se fires. 1.2 Part 1 of this Standard describes... | |
| 1.1 This standard describes the apparatus, test methods, and formulas to be used in carrying out the tests and calculations required by wire and cable standards. 1.2 Specific acceptance requirements... | |
| 1.1 This standard describes the testing procedures and requirements applicable in determining the carbon monoxide (CO) emission rate of a portable generator and also testing procedures and requirements applicable in... | |
| 1.1 This Standard includes fire test methods and associated requirements to investigate the ability of rigid nonmetallic or composite rigid nonmetallic intermediate bulk containers (IBCs) to contain combustible liquids when... | |
| 1.1 This standard includes test methods and requirements to investigate the fire growth performance of pallets in idle storage, and when storing commodities in palletized and rack storage arrangements, by... | |
| 1.1 This Standard is intended to be read together with the Standard for Rotating Electrical Machines - General Requirements, UL 1004-1 and all other applicable UL 1004 series (Standard for... | |
| 1.1 This Standard is intended to be read together with the Standard for Rotating Electrical Machines - General Requirements, UL 1004-1. For machines covered by UL 1004-9, only the following... | |
| 1.1 This Standard is intended to be read together with the Standard for Rotating Electrical Machines - General Requirements, UL 1004-1. The requirements in this Standard supplement or amend the... | |
| 1.1 This Standard is intended to be used in conjunction with the general requirements of Annex A, Ref. No. 1. The requirements of Annex A, Ref. No. 1 apply unless... | |
| 1.1 This standard presents methodologies for characterizing and quantifying coarse, fine, and ultrafine particles and volatile organic compound (VOC) emissions from operating three-dimensional (3D) printers under normal conditions of use... | |
| 1.1 This standard provides the requirements for relocatable buildings. Note: See Section 4 Glossary, Annex C and Section D3. 1.2 This Standard applies to relocatable buildings where the major occupancy,... | |
| 1.1 This Standard sets forth minimum requirements for safety valves, categorized as pressure-relief valves, safety relief valves and hydrostatic relief valves for anhydrous ammonia and liquefied petroleum gas (LP-Gas). These... | |
| 1.1 This standard sets forth minimum requirements for the following types of devices for engine fuel system applications intended for use with liquefied petroleum gas (LP-Gas), natural gas, and/or manufactured... | |
| 1.1 This Standard sets forth requirements for smoke detectors and accessories, including mechanical guards to be employed in ordinary indoor locations in accordance with the following: a) In Canada only:... | |
| 1.1 This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below-grade, or at-grade, or above-grade use as an enclosure for... | |
| 1.1 This Standard sets forth the minimum requirements for cover primary, secondary, and coaxial types of flexible connector pipes intended for short length transfer and containment of the specific flammable... | |
| 1.1 This standard specifies the requirements for devices intended for positioning, which may include bundling, routing, locating, and securing of cable, wire, conduit, or tubing used in a wiring system... | |
| 1.1 This Standard specifies the requirements for distribution (power) cables, and control and signal cables for installation aboard marine vessels, fixed and floating offshore petroleum facilities, and mobile offshore drilling... | |
| 1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or thermoplastic... | |
| 1.1 This Standard specifies the requirements for low-halogen aboveground (Type AG) reinforced thermosetting resin conduit (RTRC) and fittings for installation and use in accordance with CSA C22.1, Canadian Electrical Code... | |
| 1.1 This Standard specifies the requirements for low-halogen belowground (Type BG) reinforced thermosetting resin conduit (RTRC) and fittings, for installation and use in accordance with CSA C22.1, Canadian Electrical Code... | |
| 1.1 This Standard states the construction, test, and marking requirements covering the safety of electrical and electrical/optical-f iber cables rated 60°C to 250°C and intended for 150-volt and lower-potential non-power-limited... | |
| 1.1 This Standard states the construction, test, and marking requirements covering the safety of single and multiple coaxial and coaxial/optical-fibe r cables for the distribution of radio frequency signals such... | |
| 1.1 This test method describes the testing procedures and requirements applicable to insulated wall constructions by use of a standardized large-scale corner test. 1.2 The purpose of this test method... | |
| 1.1 This test method describes the testing procedures and requirements applicable to the classification of interior finish material assemblies by use of a standardized room fire exposure. 1.2 This test... | |
| 1.1 This test method provides impact resistance data for the evaluation of prepared steep slope roof covering materials. For purposes of this Standard, prepared roof covering materials are considered to... | |
| 2.1 This document provides general guidance for safe design, installation, and maintenance of electrical equipment in hazardous (classified) locations using appropriate means to prevent ignition of flammable gases and vapors,... | |
| 2.1 This sStandard applies to cord- and plug-connected household and similar utilization equipment (see Definitions, Section 3) typically rated 2050 A or less, nominal 50 or 60 Hz, having 3-wire... | |
| 2.1 This Standard establishes general requirements for human health and environmental criteria for industrial, institutional, and consumer cleaning and cleaning-related products such as but not limited to: a) Hard Surface... | |
| 2.1 This Standard is applicable to interoperable medical products, including assembled systems of interoperable medical products that comprise or are intended to be incorporated into interoperable medical systems within an... | |
| Alarm Valves for Fire-Protection Service UL 193 1.1 These requirements cover alarm valves for use in automatic wet-pipe sprinkler systems for fire-protection service. Alarm valves covered by these requirements are... | |
| Amateur Movie Lights UL 1230 1.1 These requirements cover amateur movie and video lights intended to be hand held or attached to a camera. These lights may be cord connected,... | |
| Audio-Video Products and Accessories UL 1492 1.1 These requirements cover audio and video products intended for use on supply circuits in accordance with the National Electrical Code, NFPA 70. 1.2... | |
| Batteries for Use In Light Electric Vehicle (LEV) Applications ANSI/CAN/UL/ULC 2271 1.1 These requirements cover electrical energy storage assemblies (EESAs) such as battery packs and combination battery pack-electrochemical capacitor assemblies... | |
| Chimney Liners UL 1777 1.1 These requirements cover metallic and nonmetallic chimney liners intended for field-installation into new or existing masonry chimneys that are used for the natural draft venting... | |
| Commercial Closed-Circuit Television Equipment UL 2044 1.1 These requirements cover closed-circuit television equipment that: a) Are intended for commercial use on supply circuits as defined in the National Electrical Code,... | |
| Commercial Filters for Cooking Oil UL 1889 1.1 These requirements cover commercial filters for cooking oil rated 600 volts or less and intended for use in accordance with the National... | |
| Commercial Incinerators UL 2790 1.1 These requirements apply to direct-fed incinerators, including those of the gas and electric ignition types, designed primarily for use as a crematory (as defined in... | |
| Commercial Wood-Fired Baking Ovens - Refractory Type UL 2162 1.1 These requirements apply to commercial wood-fired ovens intended for use by commercial establishments for the purpose of cooking or baking... | |
| Commercial/Industria l Gas and/or Oil-Burning Assemblies With Emission Reduction Equipment UL 2096 1.1 These requirements cover fuel burning heating appliances that are provided with or are intended for installation with... | |
| Digital Alarm Communicator System Units UL 1635 1.1 These requirements cover digital alarm communicator system units for use in central-station burglar-alarm systems, proprietary burglar alarm systems, police station connect burglar-alarm... | |
| Durability of Fire Resistive Coatings and Materials UL 2431 1.1 This standard is intended to provide a means to measure the ability of fire resistive materials to retain their fire... | |
| Electric Clothes Washing Machines and Extractors UL 2157 1.1 This Standard applies to electric clothes washing machines and extractors intended to be used in nonhazardous locations in accordance with the... | |
| Electric Heating Pads UL 130 1.1 These requirements cover electric heating pads for use in accordance with the National Electrical Code on either direct-current or single-phase alternating-current nominal 120 V... | |
| Electric Lawn Mowers UL 1447 1.1 These requirements cover cord-connected electrically operated lawn mowers rated 250 volts or less to be employed in accordance with ANSI/NFPA 70. 1.2 These requirements... | |
| Electric Radiant Heating Panels and Heating Panel Sets UL 1693 1.1 These requirements cover radiant heating panels and heating panel sets, for use on ac supply system voltages not exceeding... | |
| Electric Space Heating Cables UL 1673 1.1 These requirements cover electric space heating cables intended for space heating purposes, rated for 480 V or less, for installation in unclassified locations... | |
| Electric Utility Meters UL 2735 1.1 These requirements cover the electrical safety of electric utility (revenue) meters rated up to 600 V, which measure, monitor, record, transmit, or receive electrical... | |
| Electrical Systems for Personal E-Mobility Devices ANSI/CAN/UL-2272:201 6 1.1 These requirements cover the electrical drive train system including the battery system, other circuitry and electrical components for electric powered scooters... | |
| Engine-Generator Assemblies for Use in Recreational Vehicles UL 1248 1.1 These requirements cover the fire and casualty aspects associated with the mechanical performance and the electrical features of engine driven... | |
| Exhibition Display Units, Fabrication and Installation UL 2305 1.1 These requirements cover exhibition display unit constructions that are intended for indoor use for the purpose of illuminating, animating, activating, or... | |
| External Corrosion Protection Systems for Steel Underground Storage Tanks UL 1746 1.1 These requirements cover pre-engineered corrosion protection systems intended to be factory installed on the exterior surface of steel... | |
| Field Erected Boiler Assemblies UL 2106 1.1 These requirements apply to field assembled boiler assemblies that are provided with or are intended for installation with single fuel-gas, single fuel-oil, or... | |
| Fire Tests of Fire-Protective Curtain Assemblies UL 10D 1.1 These requirements cover the evaluation of fire-protective curtain assemblies intended to provide supplemental, passive fire protection as part of an engineered... | |
| Fixed Condensed Aerosol Extinguishing System Units ANSI/CAN/UL/ULC 2775 1.1 These requirements cover the construction and operation of fixed condensed aerosol extinguishing system units inclusive of aerosol generating extinguishing system units... | |
| Flexible Lighting Products UL 2388 1.1 This standard covers portable flexible lighting products with a maximum input voltage rating of 120 volts to be used in accordance with the National... | |
| Gasketed Joints for Ductile-Iron Pipe and Fittings for Fire Protection Service UL 194 1.1 These requirements cover gasketed joints for ductile-iron pipe and fittings for use in underground fire service... | |
| Gaskets and Seals UL 157 1.1 These requirements cover test procedures and performance criteria for the evaluation of nonmetallic gasket and seal materials such as elastomers, composite gasket material, flexible... | |
| General Requirements for Battery-Powered Appliances UL 2595 1.1 This standard applies to battery operated appliances. This standard applies to appliances incorporating detachable, integral and separable battery packs. The maximum rated... | |
| Halon 1211 Recovery/Recharge Equipment UL 2006 1.1 These requirements cover Halon 1211 recovery/recharge equipment rated 600 volts or less, and intended to be used in ordinary locations in accordance with... | |
| Hardware for the Support of Conduit, Tubing, and Cable UL 2239 1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and... | |
| Hydromassage Bathtubs UL 1795 1.1 These requirements cover indoor hydromassage bathtubs, rated 250 volts or less, for household and commercial use, for permanent connection to the plumbing of the building. | |
| Ignition-Protection Test for Marine Products UL 1500 1.1 This test procedure covers the basic test methods for determining ignition protection and is not to be considered as a test standard... | |
| Infrared Thermometers UL 2333 1.1 These requirements cover portable, battery operated infrared thermometers and accessories affecting accuracy intended for food safety. 1.2 These requirements do not cover temperature indicating devices... | |
| Insulated Multi-Pole Splicing Wire Connectors UL 2459 1.1 This Standard covers insulated multi-pole mating or non-mating splicing wire connectors intended for field wiring and factory wiring for use in accordance... | |
| Junction Boxes for Swimming Pool Luminaires UL 1241 1.1 These requirements cover junction boxes for use with swimming pool luminaires intended for installation and use in accordance with the National... | |
| Liquid-Level Gauges for Oil Burner Fuels and Other Combustible Liquids UL 180 1.1 This Standard covers construction and performance requirements for the tank accessories identified in Clause 1.2, for use... | |
| Low Voltage LED Wire UL 2592 1.1 These requirements cover single-conductor and multi-conductor, unjacketed, 18 - 10 AWG (0.807 - 5.16 mm2), low voltage LED wire rated 105°C... | |
| Low Voltage Marine Lighting Fixtures UL 1149 1.1 These requirements apply to incandescent and fluorescent marine lighting fixtures rated 36 volts (nominally) or less using an AC or DC source... | |
| Low-Voltage Fuses - Part 2: Class C Fuses UL 248-2 1.1 Scope This Part applies to Class C fuses rated 1200 A or less and 600 V ac. DC ratings... | |
| Low-Voltage Fuses - Part 3: Class CA and CB Fuses UL 248-3 1.1 Scope This Part applies to Class CA and CB fuses rated 60 A or less and 600... | |
| Low-Voltage Fuses - Part 4: Class CC Fuses UL 248-4 1.1 Scope This Part applies to Class CC fuses rated 30 A or less and 600 V ac. DC ratings... | |
| Low-Voltage Fuses - Part 5: Class G Fuses UL 248-5 1.1 Scope This Part applies to Class G fuses rated 20 A or less, 600 V ac; 21 - 60... | |
| Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses UL 248-6 1.1 Scope This Part applies to Class H Non-Renewable fuses rated 600 A or less and either 250 or... | |
| Low-Voltage Fuses - Part 7: Class H Renewable Fuses UL 248-7 1.1 Scope This Part applies to Class H Renewable fuses rated 600 A or less and either 250 or... | |
| Marine Through-Hull Fittings and Sea-Valves UL 1121 1.1 These requirements cover marine through hull fittings intended to be used above or below the water line and marine sea valves for... | |
| Marine Use Filters, Strainers, and Separators UL 1105 1.1 These requirements cover marine filters, strainers, and separators intended to separate impurities and/or water from the fuel in gasoline or diesel... | |
| Metal-Clad Cables UL 1569 1.1 These requirements cover round or flat metal-clad cables that contain 0.824 - 1010 mm2 (18 AWG - 2000 kcmil) insulated circuit conductors with or... | |
| Meters for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) UL 25A 1.1 These requirements cover positive displacement liquid meters for use with... | |
| Neon Transformers and Power Supplies UL 2161 1.1 This standard applies to transformers and power supplies, including those intended to be connected to a Class 2 source of supply, that... | |
| Nonmetallic Safety Cans for Petroleum Products UL 1313 1.1 These requirements cover nonmetallic safety cans that have nominal capacities of 5 Imperial gallons (22.7 L) or less and that are... | |
| Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies UL 147A 1.1 These requirements cover nonrefillable cylinder assemblies for use with propane, Methylacetylene-Prop adiene, Stabilized (MPS-Gas), and propylene. 1.2 Nonrefillable cylinder assemblies... | |
| Outlet Circuit Testers and Similar Indicating Devices UL 1436 1.1 These requirements apply to outlet circuit testers, including screwdriver and pen-style voltage presence indicators, for use on 15-, 20-, and... | |
| Outline of Investigation for Crimp Tools for use with Connecting Devices 1976 1.1 These requirements cover crimp tools that have been evaluated for use with the following types of specified... | |
| Overheating Protection for Motors UL 2111 1.1 The requirements in this standard cover: a) Deleted b) Deleted c) Thermal-protective devices. d) Deleted 1.2 Deleted 1.3 Deleted 1.4 Deleted 1.5 A... | |
| Oxy-Fuel Gas Torches UL 123 1.1 These requirements cover oxy-fuel gas torches used in operations such as welding, cutting, heating, scarfing, powder cutting, or other allied processes. 1.2 These requirements... | |
| Pilot-Operated Pressure-Control Valves for Fire-Protection Service UL 1739 1.1 These requirements cover pilot-operated pressure-control valves intended to reduce the water pressure in the supply piping for standpipe systems, or sprinkler... | |
| Pressure Pipe and Couplings, Glass Fiber-Reinforced, for Underground Fire Service UL 1713 1.1 These requirements cover glass-fiber-reinforc ed, thermosetting-resin pipe (RTRP) and glass-fiber-reinforc ed, plastic-mortar pipe (RPMP), and their couplings. | |
| Protected Aboveground Tanks for Flammable and Combustible Liquids UL 2085 1.1 These requirements cover shop fabricated, aboveground atmospheric Protected Tanks intended for storage of stable flammable, or combustible liquids that... | |
| Replace this clause of the RD with the following: This Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS) . The primary function of the UPS for this Standard is to ensure... | |
| Sécurité des produits de consommation - Lignes directrices pour les fournisseurs CAN/UL-10377:2017 1 Domaine d'application La présente Norme internationale fournit des recommandations pratiques aux fabricants concernant l'appréciation et le management... | |
| Shear Resistance Tests for Ceiling Boards for Manufactured Homes UL 1296 1.1 These requirements cover ceiling materials intended for use as structural building products in manufactured homes. 1.2 These requirements... | |
| Single Pole Locking-Type Separable Connectors UL 1691 1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors, panel inlets, and panel outlets, adapters, and accessories, rated up to... | |
| Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids ANSI/CAN/UL/ULC 2258:2018 1.1 This Standard covers the minimum requirements for nonmetallic or composite primary tanks, secondary tanks, and... | |
| Standard for Fibre Reinforced Underground Tanks for Flammable and Combustible Liquids ANSI/CAN/UL/ULC 1316:2018 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that... | |
| Standard for Safety for In-building 2-Way Emergency Radio Communication Enhancement Systems UL 2524 1.1 These requirements cover products (e.g. repeater, transmitter, receiver, signal booster components, remote annunciators and operational consoles,... | |
| Strength of Body and Hydraulic Pressure Loss Testing of Backflow Special Check Valves UL 1469 1.1 These requirements cover backflow special check valves of 3/4 through 12 NPS (nominal pipe... | |
| Suspended Ceiling Power Grid Systems and Equipment UL 2577 1.1 These requirements cover suspended ceiling grid low voltage/extra-low voltage systems and equipment intended for installation and use in accordance with... | |
| Sway Brace Devices for Sprinkler System Piping UL 203A 1.1 These requirements cover sway brace devices intended to protect fire protection system piping in locations subject to earthquakes. These devices... | |
| Tests of Fire Resistive Grease Duct Enclosure Assemblies UL 2221 1.1 These tests are intended to determine the fire resistance of grease duct enclosure assemblies. These requirements limit the combustibility,... | |
| Thermoplastic Sprinkler Pipe and Fittings for Fire Protection Service UL 1821 1.1 These requirements cover thermoplastic pipe and fittings for use in wet pipe sprinkler systems for fire protection service. | |
| This document specifies the safety requirements and additional test methods for special application lifejackets and buoyancy aids (hereafter named PFD) for adults, children or infants. It is intended to be... | |
| This Part applies to Class J fuses rated 600 A or less and 600 V ac. DC ratings are optional. | |
| This Part applies to Class K fuses rated 600 A or less and either 250 or 600 V ac. DC ratings are optional. | |
| This Part applies to Class L fuses rated 100 - 6000 A and 600 V ac. DC ratings are optional. | |
| This Part applies to Class R fuses rated 600 A or less and either 250 or 600 V ac. DC ratings are optional. | |
| This Part applies to Class T fuses rated 1200 A or less and 300 or 600 V ac. DC ratings are optional. | |
| This Part applies to plug fuses rated 30 A or less and 125 V ac (127 V ac for Mexico). DC ratings are optional. | |
| This Part applies to supplemental fuses rated 60 A or less intended only for supplementary overcurrent protection where branch circuit or equivalent applications are not involved. DC ratings are optional. | |
| This Part applies to test limiters calibrated to specific limits of peak let-through current and clearing I2t at 250, 300, 480, or 600 V ac. | |
| This part of ISO 12402 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close... | |
| This part of ISO 12402 specifies the safety requirements for lifejackets, performance level 100. It applies to lifejackets used by adults or children. It applies to lifejackets used by adults,... | |
| This part of ISO 12402 specifies the test methods for personal flotation devices. Where references are made to ISO 12402 standards, they shall be considered to be to UL 12402... | |
| This part of ISO 15027 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the... | |
| This part of ISO 15027 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits. This part of ISO 15027 specifies the test methods for... | |
| This standard provides minimum construction and test requirements in addition to manufacturer installation and maintenance recommendations for the safe operation of ignition systems and components for spark-ignited reciprocating internal combustion... | |
| This standard specifies the requirements for electric vehicle cables rated up to 1000V AC and DC intended to be part of a cord set carried in the vehicle for connection... | |
| Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances UL 1411 1.1 These requirements apply to transformers, autotransformers, and motor-transformers intended to be used in audio-, radio-,... | |
| UL 2218A 1.1 This test method provides impact resistance data for the evaluation of low slope roofing systems. For purposes of this standard, roofing systems consist of various component materials... | |
| UL Standard | |
| Unvented Alcohol Fuel Burning Decorative Appliances UL 1370 1.1 These requirements apply to factory built unvented liquid or gelled alcohol based, fuel burning decorative appliances intended to be fixed non-moveable... | |
| Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables UL 1685 4.1 The UL flame exposure is a vertical-tray fire test for determining values of cable damage height and... | |
| Wall Protectors, Floor Protectors, and Hearth Extensions UL 1618 1.1 These requirements cover wall protectors, floor protectors, and hearth extensions that are intended for use with heat producing devices, such... |
| Next >> |