Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
660
670
680
690
700
710
719
720
721
722
723
724
725
726
727
728
729
730
731
740
750
760
770
780
790
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics \x96 Measurement of sound pressure level from service equipment or activities in buildings \x96 Engineering method (ISO/DIS 16032:2023) | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 2: Calculation of muzzle blast (ISO/DIS 17201-2:2024) | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 3: Sound propagation calculations (ISO/FDIS 17201-3:2018) | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 4: Calculation of projectile sound (ISO/DIS 17201-4:2024) | |
| Acoustics \x96 Noise from shooting ranges \x96 Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021) | |
| Addressing \x96 Part 2: Assigning and maintaining addresses for objects in the physical world (ISO/DIS 19160-2:2022) | |
| Addressing \x96 Part 4: International postal address components and template language (ISO/DIS 19160-4:2022) | |
| Agricultural and forestry machinery \x96 Environmental requirements for sprayers \x96 Part 5: Aerial spray systems (ISO/DIS 16119-5:2021) | |
| Agricultural and forestry machinery \x96 Inspection of sprayers in use \x96 Part 1: General (ISO/DIS 16122-1:2022) | |
| Agricultural and forestry machinery \x96 Inspection of sprayers in use \x96 Part 2: Horizontal boom sprayers (ISO/DIS 16122-2:2022) | |
| Agricultural and forestry machinery \x96 Inspection of sprayers in use \x96 Part 3: Sprayers for bush and tree crops (ISO/DIS 16122-3:2022) | |
| Agricultural and forestry machines \x96 Inspection of sprayers in use \x96 Part 4: Fixed and semi-mobile sprayers (ISO/DIS 16122-4:2022) | |
| Agricultural and forestry machines \x96 Inspection of sprayers in use \x96 Part 5: Aerial spray systems \x96 Environmental protection (ISO/DIS 16122-5:2018) | |
| Agricultural machinery and tractors \x96 Safety of partially automated, semi-autonomous and autonomous machinery \x96 Part 1: Machine design principles and vocabulary (ISO/DIS 18497-1:2022) | |
| Agricultural machinery and tractors \x96 Safety of partially automated, semi-autonomous and autonomous machinery \x96 Part 2: Design principles for obstacle protection systems (ISO/DIS 18497-2:2022) | |
| Agricultural machinery and tractors \x96 Safety of partially automated, semi-autonomous and autonomous machinery \x96 Part 3: Autonomous operating zones (ISO/DIS 18497-3:2022) | |
| Agricultural machinery and tractors \x96 Safety of partially automated, semi-autonomous and autonomous machinery \x96 Part 4: Verification methods and validation principles (ISO/DIS 18497 4:2022) | |
| Air compressors and compressed air systems \x96 Part 1: Air compressor safety requirements (ISO/DIS 18623-1:2023) | |
| Air filters for general ventilation \x96 Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO/DIS 16890-1:2025) | |
| Air filters for general ventilation \x96 Part 2: Measurement of fractional efficiency and air flow resistance (ISO/DIS 16890-2:2020) | |
| Air filters for general ventilation \x96 Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO/DIS 16890-3:2023) | |
| Air filters for general ventilation \x96 Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO/DIS 16890-4:2020) | |
| Anaesthetic and respiratory equipment \x96 Tracheobronchial tubes (ISO/DIS 16628:2020) | |
| Analytical colorimetry \x96 Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power (ISO/DIS 18314-2:2022) | |
| Analytical colorimetry \x96 Part 3: Special indices (ISO/DIS 18314-3:2022) | |
| Analytical colorimetry \x96 Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020) | |
| Animal and vegetable fats and oils \x96 Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS \x96 Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential... | |
| Animal and vegetable fats and oils \x96 Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS \x96 Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and... | |
| Animal and vegetable fats and oils \x96 Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS \x96 Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol... | |
| Animal and vegetable fats and oils \x96 Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS \x96 Part 4: Method using fast alkaline transesterification and measurement for 2-MCPD, 3-MCPD and... | |
| Anodizing of aluminium and its alloys \x96 Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019) | |
| Assistive products for toileting, bathing and showering \x96 Requirements and test methods (ISO/DIS 17966:2024) | |
| Ball valves for thermoplastics piping systems for hot and cold water installations under pressure \x96 Types, dimensions and requirements (ISO/DIS 18984:2024) | |
| Binders for paints and varnishes \x96 Determination of turbidity (ISO/DIS 15715:2024) | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications \x96 Part 1: Evaluation and testing within a risk management process (ISO 18562-1:2017) | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications \x96 Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017) | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications \x96 Part 3: Tests for emissions of volatile organic compounds (VOCs) (ISO 18562-3:2017) | |
| Biocompatibility evaluation of breathing gas pathways in healthcare applications \x96 Part 4: Tests for leachables in condensate (ISO 18562-4:2017) | |
| Brazing \x96 Filler metals (ISO/DIS 17672:2023) | |
| Brazing \x96 Fluxes for brazing \x96 Classification and technical delivery conditions (ISO 18496:2020) | |
| Brazing \x96 Imperfections in brazed joints (ISO/DIS 18279:2022) | |
| Building automation and control systems (BACS) \x96 Part 1: Project specification and implementation (ISO/DIS 16484-1:2022) | |
| Building automation and control systems (BACS) \x96 Part 2: Hardware (ISO/DIS 16484-2:2023) | |
| Building automation and control systems (BACS) \x96 Part 4: Control applications (ISO/DIS 16484-4:2023) | |
| Building automation and control systems (BACS) \x96 Part 5: Data communication protocol (ISO/FDIS 16484-5:2022) | |
| Building automation and control systems (BACS) \x96 Part 6: Data communication conformance testing (ISO/DIS 16484-6:2019) | |
| Clinical laboratory testing and in vitro diagnostic test systems \x96 Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases... | |
| Conformity assessment \x96 Guidance for drafting normative documents suitable for use for conformity assessment (ISO/IEC DIS 17007:2024) | |
| Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test... | |
| Corrosion of metals and alloys \x96 Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process \x96 "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013) | |
| Corrosion of metals and alloys \x96 Corrosion and fouling in industrial cooling water systems \x96 Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open... | |
| Corrosion of metals and alloys \x96 Corrosion in artificial atmosphere \x96 Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO/DIS... | |
| Corrosion protection of steel structures by protective paint systems \x96 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x96 Part 1: Pull-off testing (ISO/DIS 16276-1:2024)... | |
| Corrosion protection of steel structures by protective paint systems \x96 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x96 Part 2: Cross-cut testing and X-cut... | |
| Cosmetics \x96 Sun protection test methods \x96 Percentage of water resistance (ISO 18861:2020) | |
| Cosmetics \x96 Sun protection test methods \x96 Water immersion procedure for determining water resistance (ISO 16217:2020) | |
| Data structures for electronic product catalogues for building services \x96 Part 1: Concepts, architecture and model (ISO 16757-1:2015) | |
| Data structures for electronic product catalogues for building services \x96 Part 2: Geometry (ISO 16757-2:2016) | |
| Data structures for electronic product catalogues for building services \x96 Part 4: Dictionary structures for product catalogue (ISO/DIS 16757-4:2024) | |
| Data structures for electronic product catalogues for building services \x96 Part 5: Product catalogue exchange format (ISO/DIS 16757-5:2024) | |
| Dentistry \x96 Artificial intelligence (AI) and augmented intelligence (AuI) based 2D radiograph analysis \x96 Data generation, data annotation and data processing (ISO/DIS 18374:2024) | |
| Dentistry \x96 Casting and baseplate waxes (ISO/DIS 15854:2022) | |
| Dentistry \x96 Dental tweezers (ISO/DIS 15098:2019) | |
| Dentistry \x96 Fluoride varnishes (ISO/DIS 17730:2023) | |
| Dentistry \x96 Interoperability of CAD/CAM Systems (ISO/DIS 18618:2021) | |
| Dentistry \x96 Oral care products \x96 Oral rinses (ISO/DIS 16408:2024) | |
| Dentistry \x96 Powered scaler (ISO/DIS 18397:2024) | |
| Destructive tests on welds in metallic materials \x96 Macroscopic and microscopic examination of welds (ISO/DIS 17639:2020) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 1: Methodology to determine safety-related parts of the control system and performance requirements (ISO/DIS 19014-1:2024) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO/DIS 19014-2:2024) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system (ISO/DIS 19014-3:2024) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO/DIS 19014-4:2024) | |
| Electrically propelled mopeds and motorcycles \x96 Safety requirements for conductive connection to an external electric power supply (ISO/DIS 18246:2022) | |
| Electrically propelled mopeds and motorcycles \x96 Test specifications and safety requirements for lithium-ion battery systems (ISO/DIS 18243:2024) | |
| Electrically propelled road vehicles \x96 Conductive power transfer \x96 Safety requirements (ISO/DIS 17409:2019) | |
| Electronic fee collection \x96 System architecture for vehicle related tolling \x96 Part 1: Reference model (ISO/DIS 17573-1:2018) | |
| Electronic fee collection \x96 System architecture for vehicle-related tolling \x96 Part 3: Data dictionary (ISO/DIS 17573-3:2022) | |
| Environmental solid matrices \x96 Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/DIS 16965:2024) | |
| Environmental Solid Matrices \x96 Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography (ISO/DIS 16703:2024) | |
| Essential technical requirements for mechanical components and metallic structures foreseen for Generation IV nuclear reactors (ISO 18229:2018) | |
| Eye and face protection \x96 Test methods \x96 Part 1: Geometrical optical properties (ISO/DIS 18526-1:2018) | |
| Eye and face protection \x96 Test methods \x96 Part 2 : Physical optical properties (ISO/DIS 18526-2:2018) | |
| Eye and face protection \x96 Test methods \x96 Part 3: Physical and mechanical properties (ISO/DIS 18526-3:2018) | |
| Eye and face protection \x96 Test methods \x96 Part 4: Headforms (ISO/DIS 18526-4:2018) | |
| Eye and face protection for occupational use \x96 Part 1: General requirements (ISO/DIS 16321-1:2018) | |
| Eye and face protection for occupational use \x96 Part 2: Additional requirements for protectors used during welding and related techniques (ISO/DIS 16321-2:2018) | |
| Eye and face protection for occupational use \x96 Part 3: Additional requirements for mesh protectors (ISO/DIS 16321-3:2018) | |
| Eye and face protection for occupational use \x96 Part 4: Additional requirements for protection against biological hazards (ISO/DIS 16321-4:2023) | |
| Eye and face protectors for sports use \x96 Part 1 \x96 Requirements for downhill skiing and snow-boarding goggles (ISO/DIS 18527-1:2018) | |
| Eye and face protectors for sports use \x96 Part 2 \x96 Requirements for eye protectors for squash and eye protectos for racquetball and squash 57 (ISO/DIS 18527-2:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of density and apparent porosity (ISO 18754:2020) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x96 Determination of the resistance to crack propagation by notch... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at room temperature \x96 Determination of flexural strength (ISO 17138:2014) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Thermophysical properties of ceramic composites \x96 Determination of thermal expansion (ISO 17139:2014) | |
| Flame arresters - Performance requirements, test methods and limits for use (ISO/DIS 16852:2014) | |
| Flour from wheat (Triticum aestivum L.) \x96 Amperometric method for starch damage measurement (ISO/DIS 17715:2022) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of Dimethylformamide (DMF) in footwear materials (ISO/DIS 16186:2020) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of organotin compounds in footwear materials (ISO/DIS 16179:2023) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Part 1: Determination of phthalate with solvent extraction (ISO/DIS 16181-1:2019) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Part 2: Determination of phthalate without solvent extraction (ISO/DIS 16181-2:2019) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Test method to quantitatively determine dimethylformamide in footwear materials (ISO/DIS 16189:2021) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials (ISO/DIS 16190:2021) | |
| Footwear \x96 Test methods for upper components and insocks \x96 Colour fastness to rubbing and bleeding (ISO/DIS 17700:2018) | |
| Footwear and footwear components \x96 Test method to assess antibacterial activity (ISO/DIS 16187:2023) | |
| Fusion installations \x96 Criteria for the design and operation of confinement and ventilation systems of tritium fusion facilities and fusion fuel handling facilities (ISO 16646:2024) | |
| Gas cylinders \x96 Parallel threads for connection of valves to gas cylinders \x96 Part 1: Specification (ISO/DIS 15245-1:2020) | |
| Gas cylinders \x96 Quick-release cylinder valves \x96 Specification and type testing (ISO/DIS 17871:2019) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Manually operated (ISO/DIS 15995:2018) | |
| Gas welding equipment \x96 Acetylene manifold systems for welding, cutting and allied processes \x96 Safety requirements in high-pressure devices (ISO/DIS 15615:2022) | |
| Gaseous hydrogen land vehicle refuelling connection devices \x96 Part 1: Flow capacities up to and including 120 g/s (ISO/DIS 17268-1:2024) | |
| General requirements for establishing anthropometric databases (ISO/DIS 15535:2022) | |
| Geographic information - Rules for application schema (ISO/DIS 19109:2013) | |
| Geographic information \x96 Classification systems \x96 Part 2: Land Cover Meta Language (LCML) (ISO/DIS 19144-2:2022) | |
| Geographic information \x96 Conceptual schema language (ISO/DIS 19103:2023) | |
| Geographic information \x96 Conformance and testing (ISO/DIS 19105:2020) | |
| Geographic information \x96 Data product specifications (ISO/FDIS 19131:2022) | |
| Geographic information \x96 Data quality \x96 Part 1: General requirements (ISO/DIS 19157-1:2022) | |
| Geographic information \x96 Data quality \x96 Part 3: Data quality measures register (ISO/DIS 19157-3:2025) | |
| Geographic information \x96 Feature concept dictionaries and registers (ISO/DIS 19126:2020) | |
| Geographic information \x96 Indoor feature model (ISO/DIS 19164:2023) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 1: Fundamentals | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 2: Land registration (ISO/DIS 19152-2:2024) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 3: Marine georegulation (ISO/DIS 19152-3:2023) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 4: Valuation information (ISO/DIS 19152-4:2024) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 5: Spatial plan information (ISO/DIS 19152-5:2024) | |
| Geographic information \x96 Linear referencing (ISO/DIS 19148:2020) | |
| Geographic information \x96 Observations, measurements and samples (ISO/DIS 19156:2022) | |
| Geographic information \x96 Ontology \x96 Part 6: Service ontology register (ISO/DIS 19150-6:2022) | |
| Geographic information \x96 Positioning services (ISO/DIS 19116:2019) | |
| Geographic information \x96 Schema for coverage geometry and functions \x96 Part 1: Fundamentals (ISO/DIS 13123-1:2022) | |
| Geographic information \x96 Schema for coverage geometry and functions \x96 Part 3: Processing fundamentals (ISO/DIS 19123-3:2022) | |
| Geographic information \x96 Spatial referencing by geographic identifiers (ISO/DIS 19112:2018) | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 21: Linear profile filters: Gaussian filters (ISO/DIS 16610-21:2023) | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 22: Linear profile filters: Spline filters (ISO/DIS 16610-22:2024) | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 29: Linear profile filters \x96 Wavelets (ISO/DIS 16610-29:2019) | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 31: Robust profile filters: Gaussian regression filters (ISO/DIS 16610-31:2023) | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 45: Morphological profile filters: Segmentation (ISO/DIS 16610-45:2023) | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 62: Linear areal filters: Spline filters (ISO/DIS 16610-62:2021) | |
| Geometrical product specifications (GPS) \x96 Partition \x96 Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022) | |
| Geometrical product specifications (GPS) \x96 Partitioning \x96 Part 1: Terms, definitions and basic concepts (ISO/DIS 18183-1:2022) | |
| Geometrical product specifications (GPS) \x96 Partitioning \x96 Part 2: Nominal model (ISO/DIS 18183-2:2022) | |
| Geotechnical investigation and testing \x96 Geotechnical monitoring by field instrumentation \x96 Part 4: Measurement of pore water pressure: Piezometers (ISO/DIS 18674-4:2019) | |
| Geotechnical investigation and testing \x96 Geotechnical monitoring by field instrumentation \x96 Part 5: Stress change measurements by Total Pressure Cells (TPC) | |
| Geotechnical investigation and testing \x96 Geotechnical monitoring by field instrumentation \x96 Part 7: Measurement of strains: Strain gauges (ISO/DIS 18674-7:2024) | |
| Geotechnical investigation and testing \x96 Geotechnical monitoring by field instrumentation \x96 Part 8: Measurement of forces: Load cells (ISO/DIS 18674-8:2022) | |
| Geotechnical investigation and testing \x96 Laboratory testing of rock \x96 Part 1: Determination of water content (ISO/DIS 16383-1:2024) | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 10: Direct shear tests (ISO/DIS 17892-10:2018) | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 11: Permeability tests (ISO/DIS 17892-11:2018) | |
| Guidelines for auditing management systems (ISO/DIS 19011:2025) | |
| Health informatics - Requirements for electronic prescriptions (ISO/DIS 17523:2014) | |
| Health Informatics \x96 Automatic identification and data capture marking and labelling \x96 Subject of care and individual provider identification (ISO/DIS 18530:2020) | |
| Health informatics \x96 Categorial structures for representation of nursing practice in terminological systems (ISO/DIS 18104:2022) | |
| Health informatics \x96 Terminological resources \x96 Part 1: Characteristics (ISO/DIS 17117-1:2024) | |
| Hexagon washer head drilling screws with tapping screw thread (ISO/DIS 15480:2018) | |
| Implants for surgery \x96 Minimum data sets for surgical implants (ISO/DIS 16054:2017) | |
| In vitro diagnostic medical devices \x96 Information supplied by the manufacturer (labelling) \x96 Part 1: Terms, definitions, and general requirements (ISO/DIS 18113-1:2021) | |
| In vitro diagnostic medical devices \x96 Information supplied by the manufacturer (labelling) \x96 Part 2: In vitro diagnostic reagents for professional use (ISO/DIS 18113-2:2021) | |
| In vitro diagnostic medical devices \x96 Information supplied by the manufacturer (labelling) \x96 Part 3: In vitro diagnostic instruments for professional use (ISO/DIS 18113-3:2021) | |
| In vitro diagnostic medical devices \x96 Information supplied by the manufacturer (labelling) \x96 Part 4: In vitro diagnostic reagents for self-testing (ISO/DIS 18113-4:2021) | |
| In vitro diagnostic medical devices \x96 Information supplied by the manufacturer (labelling) \x96 Part 5: In vitro diagnostic instruments for self-testing (ISO/DIS 18113-5:2021) | |
| In vitro diagnostic medical devices \x96 Requirements for certified reference materials and the content of supporting documentation (ISO/DIS 15194:2023) | |
| In vitro diagnostic medical devices \x96 Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples (ISO/DIS 17511:2019) | |
| In vitro diagnostic medical devices \x96 Requirements for reference measurement procedures (ISO/DIS 15193:2023) | |
| Indoor air \x96 Part 11: Determination of the emission of volatile organic compounds from building products and furnishing \x96 Sampling, storage of samples and preparation of test specimens (ISO/DIS 16000-11:2023)... | |
| Indoor air \x96 Part 9: Determination of the emission of volatile organic compounds from building products and furnishing \x96 Emission test chamber method (ISO/DIS 16000-9:2023) | |
| Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries \x96 Part 1: Data schema (ISO 16739-1:2018) | |
| Instruments for use in association with non-active surgical implants \x96 General requirements (ISO/DIS 16061:2020) | |
| Intelligent transport systems \x96 Application requirements and objectives (ISO/DIS 17423:2024) | |
| Intelligent transport systems \x96 Cooperative ITS \x96 Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO/DIS 17427-1) | |
| Intelligent transport systems \x96 Globally unique identification (ISO/DIS 17419:2024) | |
| Intelligent transport systems \x96 Local dynamic map (ISO/DIS 18750:2024) | |
| Laboratory medicine \x96 Requirements for the competence of calibration laboratories using reference measurement procedures (ISO/DIS 15195:2018) | |
| Leather \x96 Chemical determination of formaldehyde content \x96 Part 1: Method using liquid chromatography (ISO/DIS 17226-1:2020) | |
| Leather \x96 Chemical determination of metal content \x96 Part 2: Total metal content (ISO/DIS 17072-2:2021) | |
| Leather \x96 Chemical tests for the determination of certain azo colorants in dyed leathers \x96 Part 1: Determination of certain aromatic amines derived from azo colorants (ISO/DIS 17234-1:2019) | |
| Leather \x96 Determination of abrasion resistance \x96 Part 1: Taber method (ISO/DIS 17076-1:2018) | |
| Leather \x96 Determination of chlorinated hydrocarbons in leather \x96 Part 1: Chromatographic method for short-chain chlorinated paraffins (SCCP) (ISO/DIS 18219-1:2019) | |
| Leather \x96 Determination of chlorinated hydrocarbons in leather \x96 Part 2: Chromatographic method for middle-chain chlorinated paraffins (MCCP) (ISO/DIS 18219-2:2019) | |
| Leather \x96 Determination of ethoxylated alkylphenols \x96 Part 1: Direct method (ISO/DIS 18218-1:2021) | |
| Leather \x96 Determination of ethoxylated alkylphenols \x96 Part 2: Indirect method (ISO/DIS 18218-2:2018) | |
| Leather \x96 Identification of leather with microscopy (ISO/DIS 17131:2019) | |
| Leather \x96 Measurement of leather surface \x96 Electronic techniques (ISO/DIS 19076:2022) | |
| Leather \x96 Physical and mechanical tests \x96 Determination of dimensional change (ISO/DIS 17130:2020) | |
| Leather \x96 Physical and mechanical tests \x96 Determination of heat resistance of patent leather (ISO/DIS 17232:2025) | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to migration into polymeric material (ISO/DIS 15701:2021) | |
| Machine tools \x96 Safety \x96 Stationary grinding machines (ISO/FDIS 16089:2024) | |
| Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO/DIS 16090-1:2015) | |
| Machine tools safety \x96 Presses \x96 Part 2: Safety requirement for mechanical presses (ISO/DIS 16092-2:2018) | |
| Machine tools safety \x96 Presses \x96 Part 4: Safety requirements for pneumatic presses (ISO/DIS 16092-4:2018) | |
| Measurement of radioactivity in the environment \x96 Soil \x96 Part 1: General guidelines and definitions (ISO 18589-1:2019) | |
| Measurement of radioactivity in the environment \x96 Soil \x96 Part 4: Plutonium 238 and plutonium 239 + 240 \x96 Test method using alpha spectrometry (ISO 18589-4:2019) | |
| Measurement of radioactivity in the environment \x96 Soil \x96 Part 5: Strontium 90 \x96 Test method using proportional counting or liquid scintillation counting (ISO 18589-5:2019) | |
| Measurement of radioactivity in the environment \x96 Soil \x96 Part 6: Gross alpha and gross beta activities \x96 Test method using gas-flow proportional counting (ISO 18589-6:2019) | |
| Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS 15223-1:2009) | |
| Medical devices \x96 Sleep apnoea breathing therapy \x96 Masks and application accessories (ISO 17510:2015) | |
| Metallic and other inorganic coatings \x96 Electropolishing as a means of smoothing and passivating stainless steel (ISO/FDIS 15730:2022) | |
| Metallic and other inorganic coatings \x96 Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020) | |
| Metallic materials \x96 Sheet and strip \x96 Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO/FDIS 16808:2021) | |
| Microbiology of food and animal feed - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO/DIS 16140-2:2013) | |
| Microbiology of the food chain - Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits (ISO/DIS 18744:2013) | |
| Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO/FDIS 16140-2:2015) | |
| Microbiology of the food chain \x96 Estimation of measurement uncertainty for quantitative determinations (ISO/DIS 19036:2018) | |
| Microbiology of the food chain \x96 Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR \x96 Part 2: Method for detection (ISO/DIS 15216-2:2018) | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Clostridium spp. \x96 Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique (ISO/DIS 15213-1:2021) | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Clostridium spp. \x96 Part 2: Enumeration of Clostridium perfringens by colony-count technique (ISO/DIS 15213-2:2022) | |
| Microbiology of the food chain \x96 Method validation \x96 Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017) | |
| Microbiology of the food chain \x96 Method validation \x96 Part 4: Protocol for single-laboratory (in-house) method validation (ISO/DIS 16140-4:2017) | |
| Microbiology of the food chain \x96 Method validation \x96 Part 5: Protocol for factorial interlaboratory validation of non-proprietary methods (ISO/DIS 16140-5:2017) | |
| Microbiology of the food chain \x96 Method validation \x96 Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO/DIS 16140-6:2017) | |
| Microbiology of the food chain \x96 Method validation \x96 Part 7: Protocol for the validation of identification methods of microorganisms (ISO/DIS 16140-7:2023) | |
| Microbiology of the food chain \x96 Technical requirements and guidance on establishment or revision of a standardized reference method (ISO/DIS 17468:2022) | |
| Milk \x96 Bacterial count \x96 Protocol for the evaluation of alternative methods (ISO/DIS 16297:2019) | |
| Mining and earth-moving machinery \x96 Rock drill rigs and rock reinforcement rigs \x96 Safety requirements (ISO/DIS 18758:2025) | |
| Molecular biomarker analysis \x96 DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments (ISO/DIS 17174:2023) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for urine and other body fluids \x96 Isolated cell free DNA (ISO/DIS 18704:2024) | |
| Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals (ISO 16640:2021) | |
| Nanotechnology \x96 Nanoparticles in powder form \x96 Characteristics and measurements (ISO/DIS 17200:2019) | |
| Natural gas \x96 Calculation of methane number of gaseous fuels for reciprocating internal combustion engines \x96 Part 1: MNc method (ISO/DIS 17507-1:2024) | |
| Natural gas \x96 Calculation of methane number of gaseous fuels for reciprocating internal combustion engines \x96 Part 2: PKI method (ISO/DIS 17507-2:2024) | |
| Natural gas \x96 Energy determination (ISO/DIS 15112:2018) | |
| Non-destructive testing - Characterization and verification of ultrasonic phased array systems - Part 1: Instruments (ISO/DIS 18563-1:2013) | |
| Non-destructive testing \x96 Acoustic emission testing (AT) \x96 Leak detection by means of acoustic emission (ISO/DIS 18081:2023) | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic phased array equipment \x96 Part 2: Array probes (ISO/DIS 18563-2:2023) | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic phased array equipment \x96 Part 3: Complete systems (ISO/DIS 18563-3:2023) | |
| Non-destructive testing \x96 Equipment for eddy current examination \x96 Part 1: Instrument characteristics and verification (ISO/DIS 15548-1:2025) | |
| Non-destructive testing \x96 Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2025) | |
| Non-destructive testing \x96 Radiation methods for computed tomography \x96 Part 1: Terminology (ISO/DIS 15708-1:2024) | |
| Non-destructive testing \x96 Radiation methods for computed tomography \x96 Part 2: Principles, equipment and samples (ISO/DIS 15708-2:2024) | |
| Non-destructive testing \x96 Radiation methods for computed tomography \x96 Part 3: Operation and interpretation (ISO/DIS 15708-3:2024) | |
| Non-destructive testing \x96 Radiation methods for computed tomography \x96 Part 4: Qualification (ISO/DIS 15708-4:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Characterization and sizing of discontinuities (ISO/DIS 16827:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Characterization and verification of ultrasonic equipment for the determination of thickness (ISO/DIS 16831:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 General principles (ISO/DIS 16810:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Sensitivity and range setting (ISO/DIS 16811:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Specification for a step wedge calibration block (ISO/DIS 16946:2023) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Technique of testing claddings produced by welding, rolling and explosion (ISO/DIS 17405:2021) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Testing for discontinuities perpendicular to the surface (ISO/DIS 16826:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Through-transmission technique (ISO/DIS 16823:2024) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Time-of-flight diffraction technique for detection and sizing of discontinuities (ISO/DIS 16828:2024) | |
| Non-destructive testing \x96 Ultrasonic thickness determination (ISO/DIS 16809:2024) | |
| Non-destructive testing of welds \x96 General rules for metallic materials (ISO/DIS 17635:2023) | |
| Non-destructive testing of welds \x96 Radiographic testing \x96 Part 1: X- and gamma-ray techniques with film (ISO/DIS 17636-1:2021) | |
| Non-destructive testing of welds \x96 Radiographic testing \x96 Part 2: X- and gamma-ray techniques with digital detectors (ISO/DIS 17636-2:2021) | |
| Non-destructive testing of welds \x96 Time-of-flight diffraction technique (TOFD) \x96 Acceptance levels (ISO/DIS 15626:2017) | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Techniques, testing levels, and assessment (ISO/FDIS 17640:2018) | |
| Nuclear energy \x96 Determination of Gd2O3 content in pellets containing uranium oxide by X-ray fluorescence spectrometry (ISO 16795:2024) | |
| Nuclear facilities \x96 Criteria for design and operation of confinement systems for nuclear worksite and for nuclear installations under decommissioning (ISO 16647:2018) | |
| Numerical welding simulation \x96 Execution and documentation (ISO/DIS 18166:2025) | |
| Oil and gas industries including lower carbon energy \x96 Cathodic protection of pipeline systems \x96 Part 1: On-land pipelines (ISO/DIS 15589-1:2024) | |
| Oil and gas industries including lower carbon energy \x96 Standard cost coding system (ISO/DIS 19008:2025) | |
| Oil and gas industries including lower carbon energy \x96 Well integrity \x96 Life cycle governance (ISO/DIS 16530:2024) | |
| Oilseeds \x96 Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO/DIS 17059:2018) | |
| Ophthalmic implants \x96 Irrigating solutions for ophthalmic surgery (ISO/DIS 16671.2:2024) | |
| Ophthalmic implants \x96 Ocular endotamponades (ISO/DIS 16672:2018) | |
| Ophthalmic implants \x96 Ophthalmic viscosurgical devices (ISO/DIS 15798:2020) | |
| Ophthalmic optics \x96 Contact lenses \x96 Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO/DIS 18369-1:2025) | |
| Ophthalmic optics and instruments \x96 Optical and electro-optical devices for enhancing low vision (ISO/DIS 15253:2020) | |
| Optics and photonics \x96 Diffractive optics \x96 Vocabulary (ISO/FDIS 15902:2019) | |
| Packaging \x96 Steel drums \x96 Part 3: Inserted flange-type closure systems (ISO/DIS 15750-3:2021) | |
| Packaging \x96 Transport packaging for dangerous goods \x96 Compatibility testing of polyethylene, fluorinated polyethylene and co-extruded plastic (ISO/DIS 17508:2024) | |
| Packaging \x96 Transport packaging for dangerous goods \x96 Test methods (ISO/DIS 16495:2021) | |
| Paints and varnishes - Determination of the resistance of coatings to high-pressure water-jetting (ISO/DIS 16925:2012) | |
| Paints and varnishes \x96 Determination of film hardness by pencil test (ISO/FDIS 15184:2019) | |
| Paints and varnishes \x96 Determination of scratch resistance \x96 Part 1: Constant-loading method (ISO/DIS 1518-1:2018) | |
| Paints and varnishes \x96 Determination of scratch resistance \x96 Part 2: Variable-loading method (ISO/DIS 1518-2:2018) | |
| Paints and varnishes \x96 Determination of volatile organic compound (VOC) \x96 Gas-chromatographic method with headspace injection for VOC determination (ISO/DIS 17895:2023) | |
| Paints and varnishes \x96 Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO/DIS 17463:2021) | |
| Paints and varnishes \x96 Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO/DIS 17872:2018) | |
| Paints and varnishes \x96 Methods of exposure to laboratory light sources \x96 Part 3: Fluorescent UV lamps (ISO/DIS 16474-3:2019) | |
| Paints and varnishes \x96 Pendulum damping test (ISO/DIS 1522:2022) | |
| Paints and varnishes \x96 Standard panels for testing (ISO/DIS 1514:2023) | |
| Paints, varnishes and printing inks \x96 Determination of fineness of grind (ISO/DIS 1524:2019) | |
| Paints, varnishes and raw materials for paints and varnishes \x96 Sampling (ISO/DIS 15528:2019) | |
| Paper, board and pulps \x96 Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO/DIS 187:2022) | |
| Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO/DIS 17776:2015) | |
| Petroleum and natural gas industries \x96 Drilling and production equipment \x96 Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2022) | |
| Petroleum and natural gas industries \x96 Drilling and production equipment \x96 Part 2: Flow-control devices for side-pocket mandrels (ISO/DIS 17078-2:2025) | |
| Petroleum and natural gas industries \x96 Materials for use in H2S-containing environments in oil and gas production \x96 Part 1: General principles for selection of cracking-resistant materials (ISO/FDIS 15156-1:2020) | |
| Petroleum and natural gas industries \x96 Materials for use in H2S-containing environments in oil and gas production \x96 Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast... | |
| Petroleum and natural gas industries \x96 Materials for use in H2S-containing environments in oil and gas production \x96 Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2020) | |
| Petroleum and natural gas industries \x96 Offshore production installations \x96 Requirements and guidelines for emergency response (ISO/DIS 15544:2023) | |
| Petroleum products and related products \x96 Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density \x96 Method by constant pressure viscometer (ISO/DIS 18335:2023) | |
| Petroleum, petrochemical and natural gas industries \x96 Cathodic protection of pipeline transportation systems \x96 Part 2: Offshore pipelines (ISO/DIS 15589-2:2021) | |
| Petroleum, petrochemical and natural gas industries \x96 External corrosion protection of risers by coatings and linings \x96 Part 2: Maintenance and field repair coatings for riser pipes (ISO/DIS 18797-2:2020) | |
| Petroleum, petrochemical and natural gas industries \x96 Internal coating and lining of steel storage tanks (ISO/DIS 16961:2022) | |
| Petroleum, petrochemical and natural gas industries \x96 Life cycle costing (ISO/DIS 15663: 2019) | |
| Pigments, dyestuffs and extenders \x96 Terminology \x96 Part 1: General terms (ISO/DIS 18451-1:2018) | |
| Pigments, dyestuffs and extenders \x96 Terminology \x96 Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO/DIS 18451-2:2018) | |
| Plastic containers for intravenous injections (ISO/DIS 15747:2025) | |
| Plastics - Determination of flexural properties (ISO/DIS 178:2008) | |
| Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 17855-2:2014) | |
| Plastics \x96 Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19062-2:2025) | |
| Plastics \x96 Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of prope... | |
| Plastics \x96 Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) \x96 Requirements and test methods (ISO/DIS 15527:2018) | |
| Plastics \x96 Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography \x96 Part 5: Light-scattering method (ISO/DIS 16014-5:2018) | |
| Plastics \x96 Determination of Charpy impact properties \x96 Part 1: Non-instrumented impact test (ISO/DIS 179-1:2022) | |
| Plastics \x96 Determination of Charpy impact properties \x96 Part 2: Instrumented impact test (ISO/DIS 179-2:2018) | |
| Plastics \x96 Determination of Izod impact strength (ISO/DIS 180:2019) | |
| Plastics \x96 Determination of migration of plasticizers (ISO/FDIS 177:2016) | |
| Plastics \x96 Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO/DIS 16929:2018) | |
| Plastics \x96 Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures \x96... | |
| Plastics \x96 Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO/DIS 17556:2018)... | |
| Plastics \x96 Determination of the viscosity of polymers in dilute solution using capillary viscometers \x96 Part 1: General principles (ISO/DIS 1628-1:2024) | |
| Plastics \x96 Determination of the viscosity of polymers in dilute solution using capillary viscometers \x96 Part 2: Poly(vinyl chloride) resins (ISO/DIS 1628-2:2020) | |
| Plastics \x96 Determination of water content (ISO/DIS 15512:2018) | |
| Plastics \x96 Environmental aspects \x96 General guidelines for their inclusion in standards (ISO 17422:2018) | |
| Plastics \x96 Impact-resistant polystyrene (PS-I) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19063-2:2019) | |
| Plastics \x96 Liquid resins \x96 Determination of density by the pycnometer method (ISO/DIS 1675:2022) | |
| Plastics \x96 Methyl methacrylate-acrylon itrile-butadiene-sty rene (MABS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19066-2:2019) | |
| Plastics \x96 Polyamide (PA) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 16396-1:2021) | |
| Plastics \x96 Polyamide (PA) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 16396-2:2020) | |
| Plastics \x96 Polyethylene (PE) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 17855-2:2023) | |
| Plastics \x96 Polypropylene (PP) moulding and extrusion materials \x96 Part2: Preparation of test specimens and determination of properties (ISO/DIS 19069-2:2023) | |
| Plastics \x96 Styrene-acrylonitril e (SAN) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19064-2:2019) | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 1: General (ISO/DIS 15875-1:2024) | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 2: Pipes (ISO/DIS 15875-2:2024) | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 3: Fittings (ISO/DIS 15875-3:2024) | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 5: Fitness for purpose of the system (ISO/DIS 15875-5:2024) | |
| Plastics piping systems for industrial applications \x96 Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) \x96 Metric series for specifications for components and... | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 1: General (ISO/DIS 16486-1:2019) | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 2: Pipes (ISO/DIS 16486-2:2024) | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 3: Fittings (ISO/DIS 16486-3:2024) | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 4: Valves (ISO/DIS 16486-4:2024) | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 5: Fitness for purpose of the system... | |
| Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO/DIS 15378:2014) | |
| Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO/DIS 15537:2021) | |
| Processing of health care products \x96 Information to be provided by the medical device manufacturer for the processing of medical devices \x96 Part 1: Critical and semi-critical medical devices (ISO/FDIS... | |
| Processing of health care products \x96 Information to be provided by the medical device manufacturer for the processing of medical devices \x96 Part 2: Non-critical medical devices (ISO 17664-2:2021) | |
| Protective clothing \x96 Test methods for clothing providing protection against chemicals \x96 Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO/DIS 17491-4:2023) | |
| Protective clothing for firefighters \x96 Laboratory test methods and performance requirements for wildland firefighting clothing (ISO/DIS 15384:2025) | |
| Protective clothing for protection against chemicals \x96 Classification, labelling and performance requirements \x96 Part 1: General requirements (ISO/DIS 16602-1:2025) | |
| Protective clothing for protection against chemicals \x96 Classification, labelling and performance requirements \x96 Part 2: Physical test methods, classification and requirements (ISO/DIS 16602-2:2025) | |
| Protective clothing for protection against chemicals \x96 Classification, labelling and performance requirements \x96 Part 3: Chemical test methods, classification and requirements (ISO/DIS 16602-3:2025) | |
| Protective clothing for protection against chemicals \x96 Classification, labelling and performance requirements \x96 Part 4: Test methods, classification and requirements for specific designs and ensemble components including gloves, footwear, and... | |
| Protective clothing for protection against chemicals \x96 Classification, labelling and performance requirements \x96 Part 5: Garment test methods, classification and requirements (ISO/DIS 16602-5:2025) | |
| Protective clothing for protection against chemicals \x96 Classification, labelling and performance requirements \x96 Part 6: Guidance for Selection, Use, Care and Maintenance (ISO/DIS 16602-6:2025) | |
| Radiological protection \x96 Characteristics of reference pulsed radiation \x96 Part 1: Photon radiation (ISO/DIS 18090-1:2025) | |
| Radiological protection \x96 Monitoring and internal dosimetry for specific materials \x96 Part 2: Ingestion of uranium compounds (ISO 16638-2:2019) | |
| Radiological protection \x96 Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO/DIS 17099:2023) | |
| Radiological protection \x96 Procedures for monitoring the dose to the lens of the eye, the skin and the extremities (ISO/DIS 15382:2024) | |
| Raw, refined and boiled linseed oil for paints and varnishes \x96 Specifications and methods of test (ISO/DIS 150:2018) | |
| Resistance welding \x96 Spot welding of aluminium and aluminium alloys \x96 Weldability, welding and testing (ISO/DIS 18595:2020) | |
| Resistance welding \x96 Vocabulary \x96 Part 1: Spot, projection and seam welding (ISO/FDIS 17677-1:2020) | |
| Resistance welding \x96 Weldability \x96 Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO/DIS 18278-1:2021) | |
| Respiratory equipment \x96 Particular requirements for basic safety and essential performance of equipment for infant cardiorespiratory monitors (ISO/DIS 18778:2021) | |
| Respiratory protective devices \x96 Definitions of terms and pictograms (ISO/DIS 16972:2018) | |
| Road vehicles \x96 Standardized access to automotive repair and maintenance information (RMI) \x96 Part 2: Technical requirements (ISO/DIS 18541-2:2020) | |
| Road vehicles \x96 Standardized access to automotive repair and maintenance information (RMI) \x96 Part 3: Functional user interface requirements (ISO/DIS 18541-3:2020) | |
| Road vehicles \x96 Standardized access to automotive repair and maintenance information (RMI) \x96 Part 4: Conformance test (ISO/DIS 18541-4:2020) | |
| Road vehicles \x96 Standardized access to automotive repair and maintenance information (RMI) \x96 Part 5: Heavy duty specific provision (ISO/DIS 18541-5:2017) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 10: Physical layer and data link layer requirements for single-pair Ethernet (ISO/DIS 15118-10:2024) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 1: General information and use-case definition (ISO/DIS 15118-1:2017) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 20: 2nd generation network layer and application layer requirements (ISO/DIS 15118-20:2022) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 21: Common 2nd generation network layer and application layer requirements conformance test plan (ISO/DIS 15118-21:2024) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 2: Network and application protocol requirements (ISO/DIS 15118-2:2018) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 4: Network and application protocol conformance test (ISO/DIS 15118-4:2021) | |
| Road vehicles \x96 Vehicle to grid communication interface \x96 Part 8: Physical layer and data link layer requirements for wireless communication (ISO/FDIS 15118-8:2020) | |
| Rough-terrain trucks \x96 Visibility test methods and their verification \x96 Part 2: Slewing trucks (ISO/DIS 18063-2: 2019) | |
| Rubber hoses and hose assemblies \x96 Wire- or textile-reinforced single-pressure types for hydraulic applications \x96 Specification (ISO/DIS 18752:2020) | |
| Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling \x96 Specification (ISO/DIS 1825:2025) | |
| Safety footwear with resistance to chain saw cutting (ISO/DIS 17249:2012) | |
| Seal-less rotodynamic pumps \x96 Class II \x96 Specification (ISO/DIS 15783:2025) | |
| Simultaneous interpreting \x96 Interpreter\x92s working environment \x96 Part 3: Requirements and recommendations for interpreting hubs (ISO/DIS 17651-3:2024) | |
| Simultaneous interpreting \x96 Interpreters\x92 working environment \x96 Part 1: Requirements and recommendations for permanent booths (ISO/DIS 17651-1:2023) | |
| Simultaneous interpreting \x96 Interpreters\x92 working environment \x96 Part 2: Requirements and recommendations for mobile booths (ISO/DIS 17651-2:2023) | |
| Small craft \x96 Electrical systems used for electrical propulsion (ISO/DIS 16315:2023) | |
| Soil and waste \x96 Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrometric detection (ISO/DIS 15192:2023) | |
| Soil quality \x96 Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO/DIS 18187:2023) | |
| Soil quality \x96 Effects of contaminants on Enchytraeidae (Enchytraeus sp.) \x96 Determination of effects on reproduction (ISO/DIS 16387:2022) | |
| Soil quality \x96 Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials (ISO 17616:2019) | |
| Soil quality \x96 Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2019) | |
| Soil quality \x96 Guidance on the establishment and maintenance of monitoring programmes | |
| Solid biofuels - Determination of bulk density | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO/DIS 17831-1:2013) | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO/DIS 17831-2:2013) | |
| Solid Biofuels -- Determination of length and diameter of pellets | |
| Solid biofuels \x96 Determination of ash content (ISO/DIS 18122:2021) | |
| Solid biofuels \x96 Determination of moisture content \x96 Oven dry method \x96 Part 1: Total moisture \x96 Reference method (ISO/DIS 18134-1:2021) | |
| Solid biofuels \x96 Determination of moisture content \x96 Oven dry method \x96 Part 3: Moisture in general analysis sample (ISO/DIS 18134-3:2022) | |
| Solid biofuels \x96 Determination of moisture content \x96 Part 2: Total moisture \x96 Simplified method (ISO/DIS 18134-2:2023) | |
| Solid biofuels \x96 Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023) | |
| Solid biofuels \x96 Determination of particle size distribution for uncompressed fuels \x96 Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO/DIS 17827-1:2022) | |
| Solid biofuels \x96 Determination of particle size distribution for uncompressed fuels \x96 Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO/DIS 17827-2:2022) | |
| Solid biofuels \x96 Determination of volatile matter (ISO/DIS 18123:2022) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 1: General requirements (ISO/DIS 17225-1:2020) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 2: Graded wood pellets (ISO/DIS 17225-2:2020) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 3: Graded wood briquettes (ISO/DIS 17225-3:2020) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 4: Graded wood chips (ISO/DIS 17225-4:2020) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 5: Graded firewood (ISO/DIS 17225-5:2025) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 6: Graded non-woody pellets (ISO/DIS 17225-6:2020) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use (ISO/DIS 17225-8:2022) | |
| Solid biofuels \x96 Fuel specifications and classes \x96 Part 9: Graded hog fuel and wood chips for industrial use (ISO/DIS 17225-9:2020) | |
| Solid biofuels \x96 Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023) | |
| Solid biofuels \x96 Terminology, definitions and descriptions (ISO/DIS 16559:2020) | |
| Solid biofuels and pyrogenic biocarbon \x96 Determination of sulfur and chlorine content (ISO/DIS 16994:2025) | |
| Solid recovered fuels \x96 Determination of bulk density (ISO/DIS 18708:2024) | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 6: Laser-arc hybrid welding (ISO/DIS 15609-6:2010) | |
| Specification and qualification of welding procedures for metallic materials \x96 General rules (ISO/DIS 15607:2018) | |
| Specification and qualification of welding procedures for metallic materials \x96 Qualification based on pre-production welding test (ISO/DIS 15613:2022) | |
| Specification and qualification of welding procedures for metallic materials \x96 Qualification based on previous welding experience | |
| Specification and qualification of welding procedures for metallic materials \x96 Qualification based on tested welding consumables (ISO/DIS 15610:2021) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure specification \x96 Part 1: Arc welding (ISO/DIS 15609-1:2018) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure specification \x96 Part 2: Gas welding (ISO/DIS 15609-2:2018) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 11: Electron and laser beam welding (ISO/DIS 15614-11:2022) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 13: Upset (resistance butt) and flash welding (ISO/DIS 15614-13:2020) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2022) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 5: Arc welding of titanium, zirconium and their alloys (ISO/DIS 15614-5:2022) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 7: Overlay welding (ISO 15614-7:2016) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 9: Underwater hyperbaric wet welding (ISO/DIS 15614-9:2024) | |
| Steel \x96 Determination of the thickness of surface-hardened layers (ISO/DIS 18203:2025) | |
| Steel cord conveyor belts \x96 Part 3: Special safety requirements for belts for use in underground installations (ISO/DIS 15236-3:2025) | |
| Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO/DIS 15630-1:2008) | |
| Steel for the reinforcement and prestressing of concrete \x96 Test methods \x96 Part 3: Prestressing steel (ISO/DIS 15630-3:2024) | |
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO/DIS 15761:2019) | |
| Sterilization of health care products \x96 Moist heat \x96 Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO/DIS 17665:2022) | |
| Systems for evacuation of plume generated by medical devices (ISO/DIS 16571:2023) | |
| Test dusts for evaluating air cleaning equipment (ISO/DIS 15957:2024) | |
| Textiles \x96 Method for the detection and determination of alkylphenol ethoxylates (APEO) \x96 Part 2: Method using NPLC (ISO/DIS 18254-2:2018) | |
| Textiles \x96 Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends \x96 Part 1: Light microscopy method (ISO/DIS 17751-1:2022) | |
| Textiles \x96 Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends \x96 Part 2: Scanning electron microscopy method (ISO/DIS 17751-2:2022) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO/DIS 1833-10:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes with certain other fibres (method using dimethylformamide) (ISO/DIS 1833-12:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) (ISO/DIS 1833-13:2019) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content) (ISO/DIS 1833-15:2019) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene) (ISO/DIS 1833-16:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid) (ISO/DIS 1833-18:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 1: General principles of testing (ISO/DIS 1833-1:2019) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) (ISO/DIS 1833-20:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) (ISO/DIS 1833-21:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)... | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid) (ISO/DIS 1833-26:2020) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate) (ISO 1833-27:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 29: Mixtures of polyamide with polypropylene/polyam ide bicomponent (method using sulfuric acid) (ISO/DIS 1833-29:2019) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 2: Ternary fibre mixtures (ISO/DIS 1833-2:2019) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 3: Mixtures of acetate with certain other fibres (method using acetone) (ISO/DIS 1833-3:2018) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) (ISO/DIS 1833-4:2023) | |
| Textiles \x96 Quantitative chemical analysis \x96 Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol) (ISO/DIS 1833-9:2019) | |
| Textiles \x96 Smart Textiles \x96 Test method for fabric interface with capacitive touchscreens (ISO/DIS 17971:2024) | |
| Thermal insulating products for building applications \x96 Determination of compressive creep (ISO/DIS 16534:2019) | |
| Thermal insulating products for building applications \x96 Determination of freeze-thaw resistance (ISO/DIS 16546:2019) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of maximum service temperature (ISO/DIS 18097:2021) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of maximum service temperature for preformed pipe insulation (ISO/DIS 18096:2021) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of the apparent density of preformed pipe insulation (ISO/DIS 18098:2021) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of the coefficient of thermal expansion (ISO/DIS 18099:2021) | |
| Thermal insulation products \x96 Determination of ageing by settlement \x96 Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022) | |
| Thermoplastic elastomers \x96 Nomenclature and abbreviated terms (ISO/DIS 18064:2021) | |
| Tourism services \x96 Hotels and other types of tourism accommodation \x96 Terminology (ISO/DIS 18513:2020) | |
| Transport packages for dangerous goods \x96 Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings \x96 Guidelines for the application of ISO 9001 (ISO/DIS 16106:2018) | |
| Transportable liquid oxygen systems for medical use \x96 Part 1: Common requirements and particular requirements for base units (ISO/DIS 18777-1:2024) | |
| Transportable liquid oxygen systems for medical use \x96 Part 2: Particular requirements for portable units (ISO/DIS 18777-2:2024) | |
| Unalloyed steel \x96 Determination of low carbon content \x96 Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO/DIS 15349-2:2020) | |
| Urine-absorbing products \x96 Basic principles for evaluation of single-use adult-incontinence products from the perspective of users and caregivers (ISO/DIS 16021:2023) | |
| UV-C Devices \x96 Safety information \x96 Permissible human exposure (ISO/DIS 15858:2025) | |
| Washer disinfectors \x96 Part 5: Performance requirements and test method criteria for demonstrating cleaning efficacy (ISO/DIS 15883-5:2019) | |
| Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006) | |
| Washer-disinfectors \x96 Part 1: General requirements, terms and definitions and tests (ISO/DIS 15883-1:2020) | |
| Washer-disinfectors \x96 Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO/DIS 15883-3:2023) | |
| Washer-disinfectors \x96 Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for noncritical medical devices and health care equipment (ISO/DIS 15883-6:2025) | |
| Washer-disinfectors \x96 Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-critical thermolabile medical devices and health care equipment (ISO/DIS 15883-7:2024) | |
| Water quality \x96 Analysis of microplastic in water \x96 Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water (ISO/DIS 16094-2:2023) | |
| Water quality \x96 Analysis of microplastic in water \x96 Part 3: Thermo-analytical methods for waters with low content of suspended solids including drinking water (ISO/DIS 16094-3:2024) | |
| Water quality \x96 Application of inductively coupled plasma mass spectrometry (ICP-MS) \x96 Part 1: General guidelines (ISO/DIS 17294-1:2022) | |
| Water quality \x96 Detection and enumeration of Pseudomonas aeruginosa \x96 Part 2: Most probable number method (ISO 16266-2:2018) | |
| Water quality \x96 Determination of adsorbable organically bound fluorine, chlorine, bromine and iodine (AOF, AOCl, AOBr, AOI) \x96 Method using combustion and subsequent ion chromatographic measurement (ISO/DIS 18127:2024) | |
| Water quality \x96 Determination of dissolved chromium(VI) in water \x96 Photometric method (ISO/DIS 18724:2024) | |
| Water quality \x96 Sampling, capture and preservation of environmental DNA from water (ISO/DIS 17805:2025) | |
| Welding ? Welding of reinforcing steel (ISO/DIS 17660:2021) | |
| Welding \x96 Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO/DIS 17662:2024) | |
| Welding \x96 Grouping system for metallic materials (ISO/DIS 15608:2024) | |
| Welding \x96 Micro joining of 2nd generation high temperature superconductors \x96 Part 3: Test methods for joints (ISO/DIS 17279-3:2020) | |
| Welding \x96 Quality requirements for heat treatment in connection with welding and allied processes (ISO/DIS 17663:2022) | |
| Welding consumables \x96 Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys \x96 Classification (ISO/DIS 18274:2021) | |
| Welding consumables \x96 Test methods \x96 Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO/DIS 15792-1:2019) | |
| Welding consumables \x96 Test methods \x96 Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO/DIS 15792-2: 2019) | |
| Welding consumables \x96 Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels \x96 Classification (ISO/DIS 17633:2024) | |
| Welding consumables \x96 Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels \x96 Classification (ISO/DIS 18276:2023) | |
| Welding consumables \x96 Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels \x96 Classification (ISO/DIS 16834:2024) | |
| Wheat flour and durum wheat semolina \x96 Determination of the colour by reflectance diffused colorimetry (ISO/DIS 16624:2019) | |
| Woodworking machines \x96 Safety \x96 Part 11: Combined machines (ISO/DIS 19085-11:2018) | |
| Woodworking machines \x96 Safety \x96 Part 12: Tenoning/profiling machines (ISO/DIS 19085-12:2017) | |
| Woodworking machines \x96 Safety \x96 Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO/DIS 19085-13:2022) | |
| Woodworking machines \x96 Safety \x96 Part 14: Four-sided moulding machines (ISO/DIS 19085-14:2019) | |
| Woodworking machines \x96 Safety \x96 Part 15: Presses (ISO/DIS 19085-15:2018) | |
| Woodworking machines \x96 Safety \x96 Part 16: Table band saws and band re-saws (ISO/DIS 19085-16:2018) | |
| Woodworking machines \x96 Safety \x96 Part 1: Common requirements (ISO/DIS 19085-1:2019) | |
| Woodworking machines \x96 Safety \x96 Part 20: Horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) (ISO/DIS 19085-20:2024) | |
| Woodworking machines \x96 Safety \x96 Part 21: Double blade circular sawing machines for cross-cutting with integrated feed (ISO/DIS 19085-21:2025) | |
| Woodworking machines \x96 Safety \x96 Part 22: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines (ISO/DIS 19085-22:2024) | |
| Woodworking machines \x96 Safety \x96 Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO/DIS 19085-3:2020) | |
| Woodworking machines \x96 Safety \x96 Part 4: Vertical panel circular sawing machines (ISO/DIS 19085-4:2021) | |
| Woodworking machines \x96 Safety \x96 Part 5: Dimension saws (ISO/DIS 19085-5:2021) | |
| Woodworking machines \x96 Safety \x96 Part 6: Single spindle vertical moulding machines ("toupies") (ISO/DIS 19085-6:2021) | |
| Woodworking machines \x96 Safety \x96 Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO/DIS 19085-7:2022) | |
| Woodworking machines \x96 Safety \x96 Part 8: Belt sanding and calibrating machines for straight workpieces (ISO/DIS 19085-8:2021) | |
| Woodworking machines \x96 Safety \x96 Part 9: Circular saw benches (with and without sliding table) (ISO/DIS 19085-9:2022) | |
| Woodworking machines \x96 Safety requirements \x96 Part 17: Edge-banding machines fed by chains (ISO/DIS 19085-17:2019) |
| << Prev | Next >> |