Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
660
670
680
690
700
710
713
714
715
716
717
718
719
720
721
722
723
724
725
730
740
750
760
770
780
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Admixtures for concrete, mortar and grout \x96 Test methods \x96 Part 15: Reference concrete and method for testing viscosity modifying admixtures | |
| Admixtures for concrete, mortar and grout \x96 Test methods \x96 Part 1: Reference concrete and reference mortar for testing | |
| Aerospace series \x96 Aluminium alloy 5086 \x96 H111 \x96 Extruded bars \x96 10 mm = D = 300 mm | |
| Aerospace series \x96 Anodic electrodeposition of hexavalent chromium free primer | |
| Aerospace series \x96 Bearing, spherical, plain, in corrosion resisting steel \x96 Narrow series \x96 Dimensions and loads \x96 Inch series | |
| Aerospace series \x96 Blind bolt, 100\xb0 flush head, high strength | |
| Aerospace series \x96 Blind bolt, 100\xb0 reduced flush head, high strength | |
| Aerospace series \x96 Bolt, External Spiral Drive, flange head, tension and shear application | |
| Aerospace series \x96 Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating \x96 Inch series | |
| Aerospace series \x96 Collar, swage locking, shear type, in aluminium alloy 6061, conversion coating \x96 Inch series | |
| Aerospace Series \x96 Commercial aircraft passenger seats \x96 Reliability testing | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 01: General conditions | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 02: Oven equipment | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 03: Chilling equipment | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 04: Beverage makers | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 05: Trash compactor | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 06: Espresso maker | |
| Aerospace series \x96 ECO efficiency of seats | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeve in meta-aramid fibres \x96 Part 004: Braided, tubular, high expandable \x96 Product standard | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeve in meta-aramid fibres \x96 Part 005: Sleeve flexible, post installation \x96 Product standard | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeve in meta-aramid fibres \x96 Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from -55 \xb0C to... | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeve in meta-aramid fibres \x96 Part 009: Self-wrapping fire protection sleeve, flexible, post-installation, operating temperature from -55 \xb0C to 260 \xb0C \x96... | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeves \x96 Test methods \x96 Part 203: Coverage | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeves \x96 Test methods \x96 Part 302: High temperature exposure | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeves \x96 Test methods \x96 Part 305: Fluid absorption | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeves \x96 Test methods \x96 Part 502: Resistance to electrical arcs | |
| Aerospace series \x96 Electrical cables, installation \x96 Protection sleeves \x96 Test methods \x96 Part 505: Lightning strike, current and voltage pulse | |
| Aerospace series \x96 Embedded tags \x96 Choice of fixation for installation, removal and replacement of embedded tags | |
| Aerospace series \x96 Environmental testing \x96 Durability of the displays by general usage | |
| Aerospace series \x96 Environmental testing \x96 Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing fingertips and hands | |
| Aerospace series \x96 Expanded beam termini, fibre optic non physical contact in EN 3645 standard cavities \x96 Part 104: Female termini size 12 technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 001: Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 101: Male termini size 16 \x96 Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 102: Multimode female termini size 16 \x96 Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 103: Multimode male termini size 12 \x96 Technical specification | |
| Aerospace series \x96 Filler metals for welding \x96 Part 001: Technical specification | |
| Aerospace series \x96 Filler metals for welding \x96 Part 002: Authorized filler metals | |
| Aerospace series \x96 General technical specification for standard parts | |
| Aerospace series \x96 Heat shrinkable moulded shapes \x96 Part 103: Fluoroelastomeric, temperature range -55 \xb0C to 200 \xb0C \x96 Product Standard | |
| Aerospace series \x96 Hexavalent chromium free anodizing of aluminium and aluminium alloys | |
| Aerospace series \x96 Hexavalent chromium free chemical conversion process of magnesium and magnesium alloys | |
| Aerospace series \x96 Mechanical transfer contact, fibre optic contact Multi connectors \x96 Part 101: MT male contact 12 ways \x96 Technical specification | |
| Aerospace series \x96 Mechanical transfer contact, fibre optic contact Multi connectors \x96 Part 102: MT female contact 12 ways \x96 Technical specification | |
| Aerospace series \x96 Micro-arc oxidation of aluminium and aluminium alloys | |
| Aerospace series \x96 Organic compounds \x96 Test method \x96 Analysis by infrared spectroscopy | |
| Aerospace series \x96 Passive UHF RFID for airborne use | |
| Aerospace series \x96 Pin, close tolerance, swage locking, 100\xb0 countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating \x96 Inch series | |
| Aerospace series \x96 Pin, quick release, self-retaining, positive locking, double acting \x96 Button handle | |
| Aerospace series \x96 Pure aluminium IVD coating for fasteners | |
| Aerospace series \x96 Receptacle, floating, single lug | |
| Aerospace series \x96 Rivet, 100\xb0 medium flush head, close tolerance \x96 Inch series | |
| Aerospace series \x96 Rivet, 100\xb0 normal flush head, close tolerance \x96 Inch series | |
| Aerospace series \x96 Rivet, 100\xb0 reduced flush head, close tolerance \x96 Inch series | |
| Aerospace series \x96 Rivet, universal head, close tolerance \x96 Inch series | |
| Aerospace series \x96 Rivet-collar-system, aluminium alloy, shear type, inch series \x96 Technical Specification | |
| Aerospace series \x96 Rivets, solid, in aluminium or aluminium alloy \x96 Inch series \x96 Technical specification | |
| Aerospace series \x96 Rotary fasteners \x96 Structural and non-structural applications \x96 Technical specification | |
| Aerospace series \x96 Rotorcraft \x96 Emergency Breathing Systems (EBS) \x96 Requirements, testing and marking | |
| Aerospace series \x96 Rotorcraft immersion suits \x96 Requirements, testing and marking | |
| Aerospace series \x96 Rotorcraft life raft \x96 Requirements, testing and marking | |
| Aerospace series \x96 Screws, 100\xb0 countersunk reduced head offset cruciform recess close tolerance shank, short thread in titanium alloy, anodized MoS2 lubricated \x96 Classification: 1 100 MPa (at ambient temperature)/315... | |
| Aerospace series \x96 Steel 36NiCrMo16 \x96 1 000 MPa = Rm = 1 200 MPa \x96 Bars \x96 100 = D = 250 mm | |
| Aerospace series \x96 Steel X3CrNiMoAl (13-8-2) \x96 Vacuum induction melted and consumable electrode remelted \x96 Solution treated and precipitation treated \x96 Bars for machining \x96 a or D = 200... | |
| Aerospace series \x96 Steel X5CrNiCu 17-4 (1.4542) \x96 Air melted \x96 Solution treated and precipitation treated \x96 Plates \x96 6 mm = a = 100 mm \x96 Rm = 1... | |
| Aerospace series \x96 Steel X5CrNiCu 17-4 (1.4542) \x96 Air melted \x96 Solution treated and precipitation treated \x96 Sheets and strips \x96 a = 6 mm \x96 Rm = 1 070... | |
| Aerospace series \x96 Steel X5CrNiCu15-5 (WL 1.4545) \x96 Consumable electrode remelted (ESR or VAR) \x96 Solution treated and precipitation treated (H1025) \x96 Bars for machining \x96 a or D =... | |
| Aerospace series \x96 Surface treatments \x96 Definitions and test methods | |
| Aerospace series \x96 Thermal drift of LED luminaires \x96 Classification and measuring methods | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 001: Plate, sheet and strip | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 002: Bar and section | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 003: Tube | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 004: Wire | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 005: Forging stock | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 007: Remelting stock | |
| Aerospace series \x96 Use of regrinds and recycled materials in thermoplastic parts | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 13: Security Pyrotechnic Obscuration Devices | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-2: Requirements for passive infrared detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-3: Requirements for microwave detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-4: Requirements for combined passive infrared and microwave detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-8: Intrusion detectors \x96 Shock detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 3: Control and indicating equipment | |
| Alarm systems \x96 Social alarm systems \x96 Part 5: Interconnections and communications | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 11: Common information model (CIM) extensions for distribution | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 5: Distributed energy optimization | |
| Arc welding equipment \x96 Part 14: Performance verification | |
| Arc welding equipment \x96 Part 2: Liquid cooling systems | |
| Arc welding equipment \x96 Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment \x96 Part 5: Wire feeders | |
| Arc welding equipment \x96 Part 7:Torches | |
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz \x96 300 GHz) | |
| Automatic electrostatic application systems for ignitable coating materials \x96 Safety requirements | |
| Automotive fuels \x96 Diesel \x96 Requirements and test methods | |
| Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields | |
| Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz \x96 300 GHz) | |
| Bi-directional grid connected power converters \x96 Part 2: Interface of GCPC and distributed energy resources and additional requirements to Part 1 | |
| Bitumen shingles with mineral and/or synthetic reinforcements \x96 Product specification and test methods | |
| Bushings for transformers and reactor cable boxes not exceeding 36 kV | |
| Cable networks for television signals, sound signals and interactive service \x96 Part 2-4: LTE (4G) Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands | |
| Calibration of fibre-optic power meters | |
| Calibration of wavelength/optical frequency measurement instruments \x96 Part 3:Optical frequency meters internally referenced to a frequency comb | |
| Capacitors for power electronics | |
| Car multimedia systems and equipment \x96 Drive monitor system \x96 Part 2: Camera interfaces and recording methods | |
| Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear | |
| Central safety power supply systems | |
| Classification of environmental conditions \x96 Part 3: Classification of groups of environmental parameters and their severities \x96 Section 3: Stationary use at weatherprotected locations | |
| Classification of environmental conditions \x96 Part 3: Classification of groups of environmental parameters and their severities \x96 Section 4: Stationary use at non-weatherprotected locations | |
| Coaxial cables \x96 Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Indoor drop cables for systems operating at 5 MHz \x96 1 000 MHz... | |
| Common test methods for cables under fire conditions \x96 Heat release and smoke production measurement on cables during flame spread test \x96 Test apparatus, procedures, results | |
| Communication cables \x96 Part 2-24: Common design rules and construction \x96 Polyethylene sheathing compounds | |
| Communication cables \x96 Part 2-27: Common design rules and construction \x96 Halogen free polyolefin based sheathing compounds for cables having improved flame and fire properties (HFFR) | |
| Communication cables \x96 Specifications for test methods \x96 Part 1-2: Electrical test methods \x96 DC resistance | |
| Components for low-voltage surge protection \x96 Part 341: Performance requirements and test circuits for thyristor surge suppressors (TSS) | |
| Conductor carts | |
| Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables \x96 Part 1: General requirements | |
| Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables \x96 Part 2: Polyethylene (PE), Polypropylene (PP) or Unplasticized poly(vinyl chloride) (PVC-U) conduit systems... | |
| Connecting terminal flags for bushings from 250A to 4 000 A for insulating liquid filled transformers | |
| Connector sets and interconnect components to be used in optical fibre communication systems \x96 Product specifications Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using... | |
| Connector sets and interconnect components to be used in optical fibre communication systems \x96 Product specifications Part 15-1: Type MPO with 12 fibre PPS ferrules terminated on EN 60793-2 category... | |
| Connector sets and interconnect components to be used in optical fibre communication systems \x96 Product specifications Part 4 3: Type SC/APC simplex 9\xb0 terminated on EN 60793 2 50 of... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-114: Circular connectors \x96 Detail specification for data and power connectors with M8 screw-locking | |
| Connectors for electronic equipment \x96 product requirements \x96 Part 3-124: Rectangular connectors \x96 Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with... | |
| Connectors for thermoelectric sensors | |
| Contact Interface for Automated Connection Device | |
| Corrugated bitumen sheets \x96 Product specification and test methods | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. -- Part 3: Guide to use | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. \x96 Part 2: Accessories for covered conductors \x96... | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC \x96 Part 1: Covered conductors | |
| Cross-functional Software Standard for Railways | |
| Data sheet for photovoltaic inverters | |
| Decorative fuel-effect gas appliances | |
| Digital addressable lighting interface \x96 Part 104: General requirements \x96 Wireless and alternative wired system components | |
| Digital addressable lighting interface \x96 Part 220: Particular requirements for control gear \x96 Centrally Supplied DC Emergency Operation (device type 19) | |
| Direct acting indicating analogue electrical-measuring instruments and their accessories \x96 Part 9: Recommended test methods | |
| Durability \x96 Measurement method for the assessment of the reliability of washing machines for household use | |
| Earthing of power installations exceeding 1 kV a.c. | |
| Eaves gutters and fittings made of PVC-U \x96 Definitions, requirements and testing | |
| Ecodesign for power drive systems, motor starters, power electronics & their driven applications -- Part 2: Energy efficiency indicators for power drive systems and motor starters | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V -- Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic... | |
| Electric cables \x96 Accessories \x96 Material characterization \x96 Part 1: Fingerprinting for resinous compounds | |
| Electric cables \x96 Extended application of test results for reaction to fire | |
| Electric dishwashers for household use \x96 Methods for measuring the performance | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Environmental aspects \x96 Part 1: Requirements for repairability | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-7: Particular requirements for transportable wall saws | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 2: Circuit-breakers for a.c. and d.c. operation | |
| Electrical apparatus for the detection and measurement of oxygen \x96 Performance requirements and test methods | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises \x96 Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including... | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats \x96 Guide on the selection, installation, use and maintenance | |
| Electrical apparatus for the detection of combustible gases in domestic premises \x96 Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises \x96... | |
| Electrical apparatus for the detection of flammable gases in household applications \x96 Part 1: Test methods and performance requirements | |
| Electrical Energy Storage (EES) systems \x96 Part 1: Terminology | |
| Electrical energy storage (EES) systems \x96 Part 2-1: Unit parameters and testing methods \x96 General specification | |
| Electrical equipment for furnaces and ancillary equipment \x96 Part 1: Requirements for application design and installation | |
| Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods. | |
| Electrical insulating materials used under severe ambient conditions \x96 Test methods for evaluating resistance to tracking and erosion | |
| Electrical insulating protective clothing for low-voltage installations | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electricity metering equipment (AC) \x96 Part 3: Particular requirements \x96 Static meters for active energy (class indexes A, B and C) | |
| Electricity metering equipment \x96 Part 4: Particular requirements \x96 Static meters for DC active energy (class indexes A, B, C) | |
| Electroacoustics \x96 Hearing aids \x96 Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices | |
| Electromagnetic compatibility (EMC) \x96 Part 4-18: Testing and measurement techniques \x96 Damped oscillatory wave immunity test | |
| Electromagnetic compatibility \x96 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen | |
| Electromagnetic compatibility \x96 Radio frequency emission \x96 Statistical considerations in the determination of compliance for mass-produced products with emission requirements | |
| Electromagnetic compatibility of multimedia equipment \x96 Immunity requirements | |
| Electromechanical components for electronic equipment \x96 Basic testing procedures and measuring methods \x96 Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories | |
| Electromechanical switches for use in electrical and electronic equipment \x96 Part 1: Generic specification | |
| Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods | |
| Electrostatic hand-held spraying equipment \x96 Safety requirements \x96 Hand-held spraying equipment for non-ignitable coating materials | |
| EMC IC modelling \x96 Part 1: General modelling framework | |
| Emergency and danger systems \x96 Part 1: Emergency and danger response systems (EDRS) \x96 Basic requirements, duties, responsibilities and activities | |
| Emergency escape lighting systems | |
| Energy consumption of vending machines | |
| Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock | |
| Environmental testing \x96 Part 2-82: Tests \x96 Test XW1: Whisker test methods for components and parts used in electronic assemblies | |
| Environmental testing \x96 Part 2-85: Tests \x96 Test 85: Vibration, long time history replication | |
| Explosive atmospheres \x96 Part 11: Equipment protection by intrinsic safety "i" | |
| Explosive atmospheres \x96 Part 31: Equipment dust ignition protection by enclosure "t" | |
| Expression of performance of electrochemical analyzers \x96 Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 11: EC-cores for use in power supply applications | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 13: PQ-cores | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 5: EP-cores and associated parts for use in inductors and transformers | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 6: ETD-cores for use in power supplies | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 7: EER-cores | |
| Ferrite cores \x96 Guidelines on dimensions and the limits of surface irregularities \x96 Part 8: E-cores | |
| Fibre management systems and protective housings to be used in optical fibre communication systems \x96 Product specifications \x96 Part 2-4: Sealed dome fibre splice closures for category S & A... | |
| Fibre management systems and protective housings to be used in optical fibre communication systems \x96 Product specifications \x96 Part 3-1: Fibre management system, splice wall box, for category C & | |
| Fibre management systems and protective housings to be used in optical fibre communication systems \x96 Product specifications \x96 Part 3-2: Single-mode mechanical fibre splice | |
| Fibre management systems and protective housings to be used in optical fibre communication systems \x96 Product specifications \x96 Part 3-3: Singlemode optical fibre fusion splice protectors | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 19: Photonic chip scale package | |
| Fibre optic active components and devices \x96 Package and interface standards \x96 Part 21: Design guide of electrical interface of PIC packages using Silicon Fine-pitch Ball Grid Array (S-FBGA) and... | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 10: RoF (radio over fiber) transceivers for mobile fronthaul | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-7: Examinations and measurements \x96 Wavelength dependence of attenuation and return loss of single mode... | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic connector optical interface \x96 Part 3- 10: Connector parameters of non-dispersion shifted single mode physically contacting fibres \x96 non-angled, ferrule-less,... | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic fixed filters \x96 Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic isolators \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic passive power control devices \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Performance standard \x96 Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C \x96 Controlled environments | |
| Fibre organisers and closures to be used in optical fibre communication systems \x96 Product specifications \x96 Part 4-1: Passive optical street cabinet for category A | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-1: Installed cable plant \x96 Multimode attenuation measurement | |
| Field device integration (FDI) \x96 Part 100: Profiles \x96 Generic protocols | |
| Field device integration (FDI) \x96 Part 115-2: Profiles \x96 Modbus-RTU | |
| Field device Integration (FDI) \x96 Part 150-1: Profiles \x96 ISA100.11a | |
| Field device integration (FDI) \x96 Part 1: Overview | |
| Field Device Integration (FDI) \x96 Part 2: FDI Client | |
| Field Device Integration (FDI) \x96 Part 3: FDI Server | |
| Field Device Integration (FDI) \x96 Part 4: FDI Packages | |
| Field Device Integration (FDI) \x96 Part 5: FDI Information Model | |
| Field Device Integration (FDI) \x96 Part 6: FDI Technology Mapping | |
| Field Device Integration (FDI) \x96 Part 7: FDI Communication Devices | |
| Fixed capacitors for use in electronic equipment \x96 Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors | |
| Fixed capacitors for use in electronic equipment \x96 Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors | |
| Fixed capacitors for use in electronic equipment \x96 Part 21: Sectional specification \x96 Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 | |
| Fixed capacitors for use in electronic equipment \x96 Part 22: Sectional specification \x96 Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 | |
| Fixed electric double-layer capacitors for use in electronic equipment -- Part 2: Sectional specification - Electric double-layer capacitors for power application | |
| Fixed installations for railway applications \x96 Safety of electric traction power supply systems \x96 Part 1: Generic approach for conventional applications, functions and properties | |
| Fixed installations for railway applications \x96 Safety of electric traction power supply systems \x96 Part 2: Generic approach for non-conventional applications, functions and properties | |
| Fixed resistors for use in electronic equipment \x96 Part 1: Generic specification | |
| Fixed Ultrasonic Gas Leak Detectors (UGLD) \x96 General requirements and test methods | |
| Flat flexible cables | |
| Flow Battery Energy Systems for Stationary applications \x96 Part 2-2: Performance general requirements and test methods | |
| Flow battery systems for stationary applications \x96 Part 1: Terminology | |
| Flow Battery Systems for Stationary applications \x96 Part 2-2: Safety requirements | |
| Fuel cell technologies \x96 Part 8-101: Energy storage systems using fuel cell modules in reverse mode \x96 Test procedures for solid oxide single cell and stack performance including reversible operation... | |
| General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 12-2: Smart grid \x96 Application specification \x96 Interface and framework for customer... | |
| Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz \x96 300 GHz) | |
| Guidelines and requirements for Remote Services for fire safety and security systems | |
| Heat-shrinkable low and medium voltage moulded shapes \x96 Part 3: Specification for individual materials \x96 Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications | |
| High temperature secondary batteries \x96 Part 1: General aspects, definitions and tests | |
| High-voltage switchgear and controlgear \x96 Gas-filled compartments of AC switchgear and controlgear with rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 109: Alternating-current series capacitor by-pass switches | |
| High-voltage switchgear and controlgear \x96 Part 214: Internal arc classification for pole-mounted switchgear for rated voltages above 1 kV and up to and including 52 kV | |
| Home and Building Electronic Systems (HBES) \x96 Part 4-4: HBES IoT Point API | |
| Home and Building Electronic Systems (HBES) \x96 Part 5-1: Media and media dependent layers \x96 Power line for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) \x96 Part 6-2: IoT Semantic Ontology model description | |
| Home and Building Electronic Systems (HBES) and BACS \x96 Electrical safety and EMC requirements for radio equipment | |
| Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers \x96 Network based on HBES Class 1, Twisted Pair | |
| Household and similar electrical appliances \x96 Accessibility of control elements, doors, lids, drawers and handles | |
| Household and similar electrical appliances \x96 Particular requirements for electrical operated commercial rotary ironers | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-119: Particular requirements for commercial vacuum packaging appliances | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-84: Particular requirements for toilet appliances | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 3: Procedure for determining and verifying declared noise emission values | |
| Household and similar electrical appliances with a radio communication interface and/or a radio determination interface \x96 Safety | |
| Household appliances network and grid connectivity \x96 Part 1: General requirements, Generic data modelling and neutral messages | |
| Household appliances network and grid connectivity \x96 Part 2: Product specific mappings, details, requirements and deviations | |
| Household appliances network and grid connectivity \x96 Part 3-1: Specific Data Model Mapping: SPINE | |
| Household appliances network and grid connectivity \x96 Part 4-1: Communication Protocol Specific Aspects: SHIP 1.1 | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces \x96 Part 1: General requirements | |
| Industrial Process Control Devices -Thermographic Imagers \x96 Metrological Characterization and Calibration of Thermographic Imagers | |
| Industrial thermoprocessing equipment \x96 Part 2: Safety requirements for combustion and fuel handling systems | |
| Industrial-process control valves \x96 Part 1: Control valve terminology and general considerations | |
| Industrial-process measurement, control and automation \x96 Digital factory framework \x96 Part 1: General principles | |
| Information exchange for Electric Vehicle charging roaming service \x96 Part 1: General | |
| Information technology - Data centre facilities and infrastructures -- Part 2-3: Environmental control | |
| Information technology \x96 Cabling installation \x96 Part 4: Testing of installed optical fibre cabling | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 1: General concepts | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 2-1: Building construction | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 2-2: Power distribution | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 2-4: Telecommunications cabling infrastructure | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 3-1: Management and operational information | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 4-6: Energy Reuse Factor | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 4-7: Cooling Efficiency Ratio (CER) | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 4-8: Carbon usage effectiveness | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 4-9: Water Usage Effectiveness | |
| Information technology \x96 Generic cabling systems \x96 Part 10: Single pair cabling | |
| Information technology \x96 Generic cabling systems \x96 Part 20: Alternative cabling configurations | |
| Information technology \x96 Measurement of end-to-end (E2E) links | |
| Information technology \x96 Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks | |
| Inland navigation vessels \x96 Railings for decks and side decks \x96 Requirements, designs and types | |
| Insulating ladders for use on or near low voltage electrical installations | |
| Integrated circuits \x96 EMC evaluation of transceivers \x96 Part 3: CAN transceivers | |
| Integrated circuits \x96 Measurement of electromagnetic emissions \x96 Part 1: General conditions and definitions | |
| Integrated circuits \x96 Measurement of electromagnetic emissions \x96 Part 4: Measurement of conducted emissions, 1 ohm/150 ohm direct coupling method | |
| Integrated circuits \x96 Three dimensional integrated circuits \x96 Part 1: General conditions and definitions | |
| Integrated circuits \x96 Three dimensional integrated circuits \x96 Part 2: Alignment of stacked dies having fine pitch interconnect | |
| LCD multi-screen display terminals \x96 Part 2: Measuring methods | |
| Lead-acid starter batteries \x96 Part 4: Dimensions of batteries for heavy vehicles | |
| Lead-acid starter batteries \x96 Part 5: Mechanical properties of battery housings and handles | |
| Lead-acid starter batteries \x96 Part 6: Batteries for micro-cycle applications | |
| LED packages for general lighting \x96 Specification sheet | |
| Lighting control interface for dimming \x96 Analogue voltage dimming interface for electronic lamp controlgear | |
| Lightning density based on lightning location systems (LLS) \x96 General principles | |
| Live Working \x96 Electrically insulating helmets for use on low and medium voltage installations | |
| Low-voltage switchgear and controlgear \x96 Active arc-fault mitigation systems \x96 Part 9-1: Arc quenching devices | |
| Low-voltage switchgear and controlgear \x96 Control switches \x96 Position switches 30\xd755 \x96 Dimensions and characteristics | |
| Low-voltage switchgear and controlgear \x96 Control switches \x96 Position switches 42,5\xd780 \x96 Dimensions and characteristics | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear \x96 Part 5-2: Control circuit devices and switching elements \x96 Proximity switches | |
| Low-voltage switchgear and controlgear \x96 Part 7-4: Ancillary equipment \x96 PCB terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations | |
| Magnetic materials \x96 Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester | |
| Magnetic materials \x96 Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by... | |
| Magnetic materials \x96 Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit. | |
| Magnetic materials \x96 Part 8-11: Specifications for individual materials \x96 Fe-based amorphous strip delivered in the semi-processed state | |
| Magnetic materials \x96 Part 9: Methods of determination of the geometrical characteristics of electrical steel strip and sheet | |
| Maritime navigation and radio communication equipment and systems \x96 Automatic Identification Systems (AIS) \x96 SAR Airborne equipment \x96 Operational and performance requirements, methods of test and required test results | |
| Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE) | |
| Marking of electrical equipment with ratings related to electrical supply \x96 Safety requirements | |
| Measurement method for assessing the compatibility of induction hob and cookware | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 1-7: Test procedure for the optical durability of transparent polymeric PV packaging materials | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators \x96 Part 4 : Short-term frequency stability test methods | |
| Measuring relays and protection equipment \x96 Part 181: Functional requirements for frequency protection | |
| Measuring relays and protection equipment \x96 Part 1: Common requirements | |
| Medical electrical equipment -- Part 2-52: Particular requirements for basic safety and essential performance of medical beds | |
| Medical electrical equipment \x96 Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source | |
| Medical electrical equipment \x96 Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems | |
| Medical electrical equipment \x96 Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment | |
| Method for quantitative eco design via life cycle assessment and environmental declarations through product category rules for EEE | |
| Methodology for determining the functionality of detectors \x96 Part 1: Passive infra-red detectors for presence and motion detection | |
| Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography | |
| Mountaineering equipment \x96 Accessory cords \x96 Safety requirements and test methods | |
| Multi-element metallic cables used in analogue and digital communication and control \x96 Part 12-2: Sectional specification for screened cables characterised from 1 MHz up to 2000 MHz \x96 Work Area... | |
| Multi-element metallic cables used in analogue and digital communication and control \x96 Part 13-1: Sectional specification for outer screened cables characterised up to 2000 MHz \x96 Horizontal and building backbone... | |
| Multi-element metallic cables used in analogue and digital communication and control \x96 Part 13-2: Sectional specification for outer screened cables characterised from 1 MHz up to 2000 MHz \x96 Work... | |
| Multi-element metallic cables used in analogue and digital communication and control \x96 Part 7: Sectional specification for instrumentation and control cables | |
| Multi-radio frequency channel connectors Part 1:Generic specification \x96 General requirements and measuring methods | |
| Multimedia vibration audio systems \x96 Method of measurement for audio characteristics of audio actuator by pinna-conduction | |
| Nuclear power plants \x96 Instrumentation and control systems important to safety \x96 Software aspects for computer-based systems performing category B or C functions | |
| Nuclear power plants \x96 Instrumentation, control and electrical power systems \x96 Requirements for electromagnetic compatibility testing | |
| Operation of electrical installations \x96 Part 1: General requirements | |
| Operation of electrical installations \x96 Part 2: National annexes | |
| Optical circuit boards \x96 Interface standards \x96 Part 4-1: Terminated waveguide OCB assembly using PMT connectors | |
| Optical fibre cables \x96 Part 2-11: Indoor optical fibre cables \x96 Detailed specification for simplex and duplex cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-21: Indoor optical fibre cables \x96 Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-31: Indoor cables \x96 Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibres \x96 Part 1-31: Measurement methods and test procedures \x96 Tensile strength | |
| Optical fibres \x96 Part 1-32: Measurement methods and test procedures \x96 Coating strippability | |
| Optical fibres \x96 Part 1-33: Measurement methods and test procedures \x96 Stress corrosion susceptibility | |
| Optical fibres \x96 Part 1-40: Attenuation measurement methods | |
| Optical fibres \x96 Part 2-50: Product specifications \x96 Sectional specification for class B single-mode fibres | |
| Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers | |
| Packaging of components for automatic handling \x96 Part 3: Packaging of surface mount components on continuous tapes | |
| Particular requirements for load-shedding equipment (LSE) | |
| Photovoltaic (PV) systems \x96 Requirements for testing, documentation and maintenance \x96 Part 2: Grid connected systems \x96 Maintenance of PV systems | |
| Photovoltaic devices \x96 Part 11: Measurement of light-induced degradation of crystalline silicon solar cells | |
| Photovoltaic devices \x96 Part 4: Reference solar devices \x96 Procedures for establishing calibration traceability | |
| Photovoltaics in buildings \x96 Part 1: BIPV modules | |
| Plug-in type bushings for 72,5 kV with 630 A and 1 250 A for electrical equipment | |
| Power frequency overvoltage protective devices for household and similar applications (POP) | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 4: Profiles including MMS | |
| Power transformers \x96 Additional European requirements \x96 Part 2-3: Medium power transformer \x96 Accessories | |
| Power transformers \x96 Additional European requirements \x96 Part 2-4: Medium power transformer \x96 Special tests | |
| Power transformers \x96 Additional European requirements \x96 Part 2-5: Medium power transformer \x96 Single phase | |
| Power transformers \x96 Additional European requirements \x96 Part 3-4: Large power transformer \x96 Special tests for corrugated tank and radiators | |
| Power transformers \x96 Additional European requirements: Part 1 Common part | |
| Power transformers \x96 Additional European requirements: Part 1-2 Common part \x96 Assessment of energy performance | |
| Power transformers \x96 Additional European requirements: Part 2-1 Medium power transformer | |
| Power transformers \x96 Additional European requirements: Part 2-6 Medium power transformers \x96 Non conventional technologies | |
| Power transformers \x96 Additional European requirements: Part 3-1 Large power transformer | |
| Power transformers \x96 Additional European requirements: Part 3-3 Large power transformer \x96 Accessories | |
| Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements | |
| Powerline communication apparatus used in low voltage installations \x96 Radio disturbance characteristics \x96 Limits and methods of measurement \x96 Part 1: Apparatus for in-home use | |
| Powerline communication apparatus used in low voltage installations \x96 Radio disturbance characteristics \x96 Limits and methods of measurement \x96 Part 3: Apparatus operating above 30 MHz | |
| Pressure equipment \x96 Part 7: Safety systems for unfired pressure equipment | |
| Printed board assemblies \x96 Part 1: Generic specification \x96 Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 6-4: Generic requirements for dimensional drawings of SMD from viewpoint of land-pattern design | |
| Printed boards and printed board assemblies \x96 Design and use \x96 Part 7: Electronic component zero orientation for CAD library construction | |
| Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices \x96 Part 2-3: Specific assessment for workers with implantable neurostimulators | |
| Process management for avionics \x96 Counterfeit prevention \x96 Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Process management for avionics \x96 Management plan \x96 Part 1: Preparation and maintenance of an electronic components management plan | |
| Professional and commercial coffee machines \x96 Methods for measuring energy consumption and productivity | |
| Protection against lightning \x96 Part 1: General principles | |
| Protective gloves for firefighters | |
| Public-address-gener al-emergency-alarm-s ystem, communication-system for marine applications | |
| Quartz crystal units of assessed quality \x96 Part 4: Crystal units with thermistors | |
| Radio Frequency Connectors \x96 Part 64: Sectional specification for RF coaxial connectors with 0.8 mm inner diameter of outer conductor \x96 characteristic impedance 50 O (type-0.8) | |
| Radio-frequency connectors \x96 Part 1-2: Electrical test methods \x96 Insertion loss | |
| Radio-frequency connectors \x96 Part 24: Sectional specification \x96 Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ohms cable networks (type F) | |
| Radio-frequency connectors \x96 Part 61: Sectional specification for RF coaxial connectors with 9.5mm inner diameter of outer conductor with quick lock coupling,series Q4.1-9.5 | |
| Radio-frequency connectors \x96 Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5,0 mm \x96 Characteristic impedance 50O Ohms (type NEX10\xae) | |
| Railway Application \x96 Communication, signalling and processing system \x96 Safety related electronic systems for signalling | |
| Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems | |
| Railway applications - Rolling stock - Electrical connectors, requirements and test methods | |
| Railway applications \x96 Current collection systems \x96 Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 3-1: Rolling stock \x96 Train and complete vehicle | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 3-2: Rolling stock \x96 Apparatus | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Railway applications \x96 Environmental conditions for equipment | |
| Railway applications \x96 Fixed Installations \x96 Electrical protective measures for working on or near an overhead contact line system and/or its associated return circuit | |
| Railway applications \x96 Fixed installations \x96 Electrical safety, earthing and the return circuit \x96 Part 1: Protective provisions against electric shock | |
| Railway applications \x96 Fixed installations \x96 Electrical safety, earthing and the return circuit \x96 Part 2: Provisions against the effects of stray currents caused by DC traction systems | |
| Railway applications \x96 Fixed installations \x96 Electrical safety, earthing and the return circuit \x96 Part 3: Mutual Interaction of AC and DC traction systems | |
| Railway applications \x96 Fixed installations \x96 Electronic power converters \x96 Part 3-1: AC traction applications \x96 Electronic power compensators | |
| Railway Applications \x96 Fixed installations and rolling stock \x96 Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability \x96 Part 1: General... | |
| Railway Applications \x96 Fixed installations and rolling stock \x96 Technical criteria for the coordination between power supply and rolling stock to achieve interoperability \x96 Part 2: stability and harmonics | |
| Railway applications \x96 Railway rolling stock cables having special fire performance \x96 Test methods | |
| Railway applications \x96 Railway rolling stock cables having special fire performance \x96 Thin wall \x96 Part 1: General requirements | |
| Railway applications \x96 Railway rolling stock cables having special fire performance \x96 Thin wall \x96 Part 2: Single core cables | |
| Railway applications \x96 Railway rolling stock cables having special fire performance \x96 Thin wall \x96 Part 3: Single core and multicore cables screened and thin wall sheathed | |
| Railway applications \x96 Railway rolling stock cables having special fire performance \x96 Thin wall \x96 Part 4: Multicore and multipair sheathed cables | |
| Railway applications \x96 Rolling stock \x96 Electronic equipment | |
| Railway applications \x96 Rolling stock \x96 Pantographs: Characteristics and tests \x96 Part 2: Pantographs for metros and light rail vehicles | |
| Railway applications \x96 Rolling stock \x96 Rules for installation of cabling | |
| Railway applications \x96 Rolling stock \x96 Testing for electromagnetic compatibility with track circuits | |
| Railway applications \x96 Rolling stock \x96 Third rail current collectors (shoegear): Characteristics and tests | |
| Railway applications \x96 Rolling Stock \x96 Three phase shore (external) supply system and connectors for rail vehicles | |
| Railway applications \x96 Signalling and control systems for non UGTMS Urban Rail systems | |
| Railway applications \x96 Technical parameters of train detection systems for the interoperability of the trans-European railway system \x96 Part 1: Track circuits | |
| Railway applications \x96 Technical parameters of train detection systems for the interoperability of the trans-European railway system \x96 Part 2: Axle counters | |
| Railway applications \x96 Urban guided transport management and command/control systems \x96 Part 3: System requirements specifications | |
| Recurrent Test of Electrical Equipment | |
| Remote alcohol monitoring devices \x96 Test methods and performance requirements \x96 Part 1: Instruments for assessment programmes | |
| Requirements for generating plants to be connected in parallel with distribution networks \x96 Part 10: Tests for conformity assessment of generating units | |
| Rotating electrical machines -- Part 2: Methods for determining losses and efficiency from tests (excluding machines for traction vehicles) | |
| Rotating electrical machines \x96 Part 18-1: Functional evaluation of insulation systems \x96 General guidelines | |
| Rotating electrical machines \x96 Part 30-3: Efficiency classes of high voltage AC motors (IE code) | |
| Rotating electrical machines \x96 Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators | |
| Rotorcraft \x96 Constant Wear Lifejackets \x96 Requirements, testing and marking | |
| Safety in installations for electroheating and electromagnetic processing \x96 Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment | |
| Safety of laser products \x96 Particular Requirements for Consumer Laser Products | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Safety of toys - Part 4: Experimental sets for chemistry and related activities | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-010: Particular requirements for laboratory equipment for the heating of Materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-051: Particular requirements for laboratory equipment for mixing and stirring | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-101: Safety requirements for in vitro diagnostic (IVD) medical equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-120: Particular safety requirements for machinery aspects of equipment | |
| Safety requirements for secondary batteries and battery installations \x96 Part 5: Safe operation of lithium-ion batteries in traction applications | |
| Safety requirements for secondary batteries and battery installations \x96 Part 5: Safe operation of stationary lithium-ion batteries | |
| Safety rules for the construction and installation of lifts \x96 Lifts for the transport of persons and goods \x96 Part 20: Passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts \x96 Lifts for the transport of persons and goods \x96 Part 22: Passenger and goods passenger lifts with inclined travel path... | |
| Secondary batteries: Marking symbols for identification of their chemistry | |
| Secondary Lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles \x96 Part 1: Performance testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles \x96 Part 2: Reliability and abuse testing | |
| Security for industrial automation and control systems \x96 Part 2-4: Security program requirements for IACS service providers | |
| Self-ballasted compact fluorescent lamps for general lighting services \x96 Performance requirements | |
| Semiconductor devices \x96 Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment \x96 Part 1: Arbitrary and random mechanical vibrations | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 12: Vibration, variable frequency | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 17: Neutron irradiation | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 18: Ionizing radiation (total dose) | |
| Semiconductor devices \x96 Part 16-6: Microwave integrated circuits \x96 Frequency multipliers | |
| Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-2: Low voltage decoupling filters \x96 Safety requirements | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 2-3: Immunity requirements for mains communicating equipment operating in the range of frequencies 3... | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-3: Low voltage decoupling filter \x96 Incoming filter | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-1: Low voltage decoupling filters \x96 Generic specification | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter \x96 Impedance filter | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-5: Low voltage decoupling filter \x96 Segmentation filter | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-6: Low voltage decoupling filters \x96 Phase coupler | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-7: Portable low voltage decoupling filters \x96 Safety requirements | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 526,5 kHz \x96 Part 1: General requirements, frequency bands and electromagnetic disturbances | |
| Solderless connections \x96 Part 4: Non-accessible insulation displacement (ID) connections \x96 General requirements, test methods and practical guidance | |
| Specification and verification of energy consumption for railway rolling stock | |
| Specification for portable electrical apparatus designed to measure draught and gas pressure of heating appliances and systems | |
| Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 1-1: Radio disturbance and immunity measuring apparatus \x96 Measuring apparatus | |
| Specification for re-use of SF6 and its mixtures in electrical equipment | |
| Specifications for dedicated liquefied petroleum gas appliances \x96 Portable vapour pressure liquefied petroleum gas appliances | |
| Specifications for particular types of winding wires \x96 Part 0-8: General requirements \x96 Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire... | |
| Specifications for particular types of winding wires \x96 Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer | |
| Specifications for particular types of winding wires \x96 Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer | |
| Standard test radio-frequency connectors \x96 Part 1: Generic specification \x96 General requirements and test methods | |
| Steam turbines \x96 Part 1: Specifications | |
| Superconductivity \x96 Part 26: Critical current measurement \x96 DC critical current of RE-Ba-Cu-O composite superconductors | |
| Surface cleaning appliances \x96 Part 5: High pressure cleaners and steam cleaners \x96 Methods of measuring the performance | |
| Surge arresters \x96 Part 6: Surge arresters containing both series and parallel gapped structures \x96 System voltage of 52 kV and less | |
| Switches for appliances \x96 Part 2-1: Particular requirements for cord switches | |
| Switches for appliances \x96 Part 2-4: Particular requirements for independently mounted switches | |
| Switches for appliances \x96 Part 2-5: Particular requirements for change-over selectors | |
| Switches for appliances \x96 Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery | |
| Terminology for high-voltage direct current (HVDC) transmission | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-630: Test methods for base materials for rigid printed boards \x96 Moisture Absorption after pressure... | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 1: Generalities | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 2: Tension and suspension clamps for self supporting system | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 3: Tension and suspension clamps for neutral messenger system | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 4: Connectors | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 5: Electrical ageing test | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 6: Environmental testing | |
| Testing of PV modules to differentiate performance in multiple climates and applications \x96 Part 1: Requirements for testing | |
| Underwater acoustics \x96 Hydrophones \x96 Calibration of hydrophones \x96 Part 2: Procedures for low frequency pressure calibration | |
| Universal serial bus interfaces for data and power \x96 Part 1-2: Common components \x96 USB Power Delivery specification | |
| Universal serial bus interfaces for data and power \x96 Part 1-3: Common components \x96 USB Type-C\xae Cable and Connector Specification | |
| Vehicles, boats and devices with internal combustion engines or traction batteries \x96 Radio disturbance characteristics \x96 Limits and methods of measurement for the protection of off-board receivers | |
| Voltage characteristics of electricity supplied by public distribution networks | |
| Water supply \x96 Requirements for systems and components outside buildings | |
| Wind energy generation systems \x96 Part 26-1: Availability for wind energy generation systems | |
| Wireless Power Transfer (WPT) Glossary of Terms (TA 15) | |
| XML Exchange Formats for Programs according to IEC 61131-3 |
| << Prev | Next >> |