Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
660
670
680
690
700
710
715
716
717
718
719
720
721
722
723
724
725
726
727
730
740
750
760
770
780
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Alarm and electronic security systems \x96 Part 11-33: Electronic access control systems \x96 Access control configuration based on web services | |
| Application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression \x96 General rules and safety requirements | |
| Arc welding equipment \x96 Part 10: Electromagnetic compatibility (EMC) requirements | |
| Arc welding equipment \x96 Part 11: Electrode holders | |
| Arc welding equipment \x96 Part 12: Coupling devices for welding cables | |
| Arc welding equipment \x96 Part 13: Welding clamp | |
| Arc welding equipment \x96 Part 1: Welding power sources | |
| Arc welding equipment \x96 Part 4: Periodic inspection and testing | |
| Arc welding equipment \x96 Part 8: Gas consoles for welding and plasma cutting systems | |
| Batch control \x96 Part 1: Models and terminology | |
| Cable assemblies, cables, connectors and passive microwave components \x96 Screening attenuation measurement by the reverberation chamber method | |
| Cable management \x96 Cable tray systems and cable ladder systems | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-1: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements \x96 Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-3: Particular requirements \x96 Slotted cable trunking systems intended for installation in cabinets | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-4: Particular requirements \x96 Service poles and service posts | |
| Calibration of fibre optic chromatic dispersion test sets | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 6-1: Land pattern design \x96 Generic requirements for land pattern on circuit boards | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 6-2: Land pattern design \x96 Description of land pattern for the most common surface mounted components (SMD) | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 6-3: Land pattern design \x96 Description of land pattern for through hole components (THT) | |
| Circular connectors \x96 Detail specification for shielded and unshielded, free and fixed connectors with bayonet-locking size b12, b17, b23 and b40, for power, signal and data transmission | |
| Classification of insulating liquids | |
| Code for designation of colours | |
| Components for low-voltage surge protection \x96 Part 322: Selection and application principles for silicon PN-junction voltage limiters | |
| Components for low-voltage surge protection \x96 Part 332: Selection and application principles for metal oxide varistors (MOV) | |
| Components for low-voltage surge protective devices \x96 Part 331: Performance requirements and test methods for metal oxide varistors (MOV) | |
| Composite hollow insulators \x96 Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1 500... | |
| Compression and mechanical connectors for power cables \x96 Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um... | |
| Compression and mechanical connectors for power cables \x96 Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um =... | |
| Compression and mechanical connectors for power cables \x96 Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um =... | |
| Conduit systems for cable management \x96 Part 21: Particular requirements \x96 Rigid conduit systems | |
| Conduit Systems for cable management \x96 Part 22: Particular requirements \x96 Pliable conduit systems | |
| Conduit systems for cable management \x96 Part 23: Particular requirements \x96 Flexible conduit systems | |
| CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT \x96 PRODUCT REQUIREMENTS \x96 Part 2-010: Circular connectors \x96 Detail specification for push pull connectors with outer locking mechanism, based on mating interfaces according... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-011: Circular connectors \x96 Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101... | |
| Connectors for electrical and electronic equipment \x96 Product Requirements \x96 Part 2-012: Circular connectors \x96 Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-111: Circular connectors \x96 Detail specification for power connectors with m12 screw-locking | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2\x96115: Circular connectors \x96 Detail specification for 12-pole connectors with 2 A rated current and push-pull locking IP65/IP67 with... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-106: Rectangular connectors \x96 Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 3-126: Rectangular connectors \x96 Detail specification for 5-way power connector for industrial environments with push-pull locking | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-104: Power connectors \x96 Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking IP65/IP67... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-105: Power connectors \x96 Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for rated current... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-106: Power connectors \x96 Detail specification for 2-poles push-pull coupling rectangular connectors with fuses, for rated voltage of 400... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-107: Power connectors \x96 Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-108: Power connectors \x96 Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8-109: Power connectors \x96 Detail specification for 2P 130 A, 1 000 V plus 2P 5 A 50 V... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 8\x96103: Power connectors \x96 Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-101: Circular connectors \x96 Detail specification for M12 connectors with screw-locking | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-104: Circular connectors \x96 Detail specification for circular connectors with m8 screw-locking or snap-locking | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2: Sectional specification for circular connectors | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 8-100: Power connectors \x96 Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 8-101: Power connectors \x96 Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing... | |
| Controlgear for electric light sources \x96 Safety \x96 Part 1: General requirements | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-10: Particular requirements for electronic controlgear for high-frequency operation of cold start tubular discharge lamps (neon tubes) | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-12: Particular requirements for d.c. or a.c. supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-1: Particular requirements for starting devices (other than glow starters) | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-2: Particular requirements for electronic step-down convertors for filament lamps | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps | |
| Controlgear for electric light sources \x96 Safety \x96 Part 2-8: Particular requirements for ballasts for fluorescent lamps | |
| Cooking fume extractors \x96 Methods for measuring performance | |
| Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis | |
| Digital audio interface \x96 Part 1: General (TA 20) | |
| Digital audio interface \x96 Part 3: Consumer applications (TA 20) | |
| Digital audio interface \x96 Part 5: Consumer application enhancement (TA 20) | |
| Electric shavers for household use \x96 Evaluation of experience and user satisfaction | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 3: Circuit-breakers for DC operation | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-1: Particular requirements \x96 Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-2: Particular requirements \x96 Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-3: Particular requirements \x96 Test configuration, operational conditions and performance criteria for transducers with integrated or remote... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-4: Particular requirements \x96 Test configurations, operational conditions and performance criteria for insulation monitoring devices according to... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-5: Particular requirements \x96 Test configurations, operational conditions and performance criteria for field devices with field bus... | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 2-6: Particular requirements \x96 In vitro diagnostic (IVD) medical equipment | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part 11: Effectiveness... | |
| ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000V AC AND 1500V DC-EQUIPMENT FOR TESTING \x96 MEASURING AND MONITORING OF PROTECTIVE MEASURES-Part 17: Non contact voltage indicators | |
| Electroacoustics \x96 Personal sound exposure meters | |
| Electromagnetic compatibility (EMC) \x96 Part 4-11: Testing and measurement techniques \x96 Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per... | |
| Electromagnetic compatibility (EMC) \x96 Part 4-20: Testing and measurement techniques \x96 Emission and immunity testing in transverse electromagnetic (TEM) waveguides | |
| Electromagnetic compatibility (EMC) \x96 Part 4-29: Testing and measurement techniques \x96 Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests | |
| Electromagnetic compatibility (EMC) \x96 Part 4-2: Testing and measurement techniques \x96 Electrostatic discharge immunity test | |
| Electromagnetic compatibility (EMC) \x96 Part 4-30: Testing and measurement techniques \x96 Power quality measurement methods | |
| Electromagnetic compatibility (EMC) \x96 Part 4-3: Testing and measurement techniques \x96 Radiated, radiofrequency, electromagnetic field immunity test | |
| Electromagnetic compatibility (EMC) \x96 Part 4-41: Testing and measurement techniques \x96 Broadband radiated immunity tests | |
| Electromagnetic compatibility (EMC) \x96 Part 6-3: Generic standards \x96 Emission standard for equipment in residential environments | |
| Electromagnetic compatibility (EMC) \x96 Part 6-8: Generic standards \x96 Emission standard for professional equipment in commercial and light-industrial locations | |
| Electromechanical contactors for household and similar purposes | |
| Electromechanical equipment guide for small hydroelectric installations | |
| Electronic railway equipment \x96 Train communication network (TCN) \x96 Part 1: General architecture | |
| Electronic railway equipment \x96 Train communication network (TCN) \x96 Part 2-6: On-board to ground communication | |
| Electronic railway equipment \x96 Train communication network (TCN) \x96 Part 2-8: TCN conformance test of ETB, ECN and Communication profile | |
| Electrostatics \x96 Part 4-11: Standard test methods for specific applications \x96 Testing of electrostatic properties of composite IBC | |
| Electrostatics \x96 Part 4-6: Standard test methods for specific applications \x96 Wrist straps | |
| Electrostatics \x96 Part 4-7: Standard test methods for specific applications \x96 Ionization | |
| Electrostatics \x96 Part 4-9: Standard test methods for specific applications \x96 Garments \x96 Resistive Characterization | |
| Electrostatics \x96 Part 5-3: Protection of electronic devices from electrostatic phenomena \x96 Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices | |
| Equipment for general lighting purposes \x96 EMC immunity requirements | |
| Evaluation and routine testing in medical imaging departments \x96 Acceptance testing and quality control of dental extra-oral X-ray equipment used with dental cone beam computed tomography | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-6 Acceptance and Constancy tests \x96 Imaging performance of mammographic tomosynthesis mode of operation of mammographic X-Ray equipment | |
| Evaluation and routine testing in medical imaging departments \x96 Part 3-8: Acceptance and constancy tests \x96 Imaging performance of X-ray equipment for radiography and radioscopy | |
| Fault tree analysis (FTA) | |
| Fibre optic communication subsystem test procedures \x96 Digital systems \x96 Part 2-8: Determination of low BER using Q-factor measurements | |
| Fibre optic communication subsystem test procedures \x96 Part 1-3: General communication subsystems \x96 Measurement of central wavelength, spectral width and additional spectral characteristics | |
| Fibre optic communication subsystem test procedures \x96 Part 1-4: General communication subsystems \x96 Light source encircled flux measurement method | |
| Fibre optic communication subsystem test procedures \x96 part 2-13: Digital systems \x96 measurement of error vector magnitude | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedure \x96 Part 2-56: Tests \x96 Wind resistance of mounted housing | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-10: Tests \x96 Crush and load resistance | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-11: Tests \x96 Axial compression | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-14: Tests \x96 High optical power | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-18: Tests \x96 Dry heat | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-1: Tests \x96 Vibration (sinusoidal) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-21: Tests \x96 Composite temperature/humidity cyclic test | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-22: Tests \x96 Change of temperature | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-24: Tests \x96 Screen testing of ceramic alignment split sleeve by stress application | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-26: Tests \x96 Salt mist | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-27: Tests \x96 Dust \x96 Laminar flow | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-2: Tests \x96 Mating durability | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-33: Tests \x96 Assembly and disassembly of fibre optic mechanical splices, fibre management systems and... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-34: Tests \x96 Resistance to solvents and contaminating fluids | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-38: Tests \x96 Sealing for fibre optic sealed closures and hardened connectors using air pressure... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-43: Tests \x96 Screen testing of return loss of single-mode PC optical fibre connectors | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-44: Tests \x96 Flexing of the strain relief of fibre optic devices and components | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-50: Tests \x96 Fibre optic connector proof test with static load | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-54: Tests \x96 Corrosive atmosphere (mixed gas) | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-5: Tests \x96 Torsion | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-6: Tests \x96 Tensile strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-14: Examinations and measurements \x96 Error and repeatability of the attenuation settings of a variable... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-27: Examinations and measurements \x96 Guide-hole and fibre hole/core position of rectangular ferrules | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-30: Examinations and measurements \x96 Endface geometry of rectangular ferrule | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-33: Examinations and measurements \x96 Withdrawal force from a resilient alignment sleeve using pin gauges... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-35: Examinations and measurements \x96 Visual inspection of fibre optic connectors and fibre-stub transceivers | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-3: Examinations and measurements \x96 Active monitoring of changes in attenuation and return loss | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-45: Examinations and measurements \x96 Attenuation of random mated multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-46: Examinations and measurements \x96 Bore diameter in rectangular ferrules | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-4: Examinations and measurements \x96 Attenuation | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-50: Examinations and measurements \x96 Crosstalk for optical spatial switches | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-53: Examinations and Measurements \x96 Encircled angular flux (EAF) measurement method based on two-dimensional far... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-54: Examinations and measurements \x96 Angular misalignment between ferrule bore axis and ferrule axes for... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-55: Examinations and measurements \x96 Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive,... | |
| Fibre optic interconnecting devices and passive components \x96 Non-wavelength-selec tive fibre optic branching devices \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Performance standard \x96 Part 021-02: Single-mode fibre optic connectors terminated as pigtails and patchcords for category C \x96 Controlled environment | |
| Fibre optic interconnecting devices and passive components \x96 Performance standard \x96 Part 021-03: Single-mode fibre optic connectors terminated as pigtails and patchcords for category OP \x96 Outdoor protected environment | |
| Fibre optic interconnecting devices and passive components \x96 Performance standard \x96 Part 021-06: Single-mode fibre optic connectors terminated as pigtails and patchcords for category OP+ \x96 Extended outdoor protected environment... | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-2: Installed cable plant \x96 Single-mode attenuation and optical return loss measurement | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-3: Installed passive optical networks \x96 Attenuation and optical return loss measurements | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-5: Installed cabling plant \x96 Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 1: Generic specification | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 2-1: Blank detail specification \x96 Inductors for which safety tests are required \x96 Assessment level D | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 2: Sectional specification on Power Line Chokes | |
| Fluorescent ultraviolet lamps used for tanning \x96 Measurement and specification method | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems \x96 Part 3: Software requirements | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems \x96 Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) | |
| Guide to specification of hydraulic turbine governing systems | |
| High-frequency dielectric heating installations \x96 Test methods for the determination of power output | |
| Identification Link \x96 Part 2: Types/Models, Lots/Batches, Items and Characteristics | |
| Identification Link \x96 Unambiguous biunique Machine-Readable Identification | |
| Industrial cable reels | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 2: Physical layer specification and service definition | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 3-X: Data-link layer service definition \x96 Type X elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 4-X: Data-link layer protocol specification \x96 Type X elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 5-X: Application layer service definition \x96 Type X elements | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 6-X: Application layer protocol specification \x96 Type X elements | |
| Industrial communication networks \x96 Fieldbus specifications and Profiles \x96 Type 27 elements (MECHATROLINK) | |
| Industrial communication networks \x96 Fieldbus specifications and Profiles \x96 Type 28 elements (AUTBUS) | |
| Industrial microwave heating installations \x96 Test methods for the determination of power output | |
| Industrial networks \x96 Single-drop digital communication interface \x96 Part 2: Functional safety extensions | |
| Industrial networks \x96 Single-drop digital communication interface \x96 Part 3: Wireless extensions | |
| Industrial platinum resistance thermometers and platinum temperature sensors | |
| Industrial process control systems \x96 Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly | |
| Industrial-process control \x96 Safety of analyser houses | |
| Industrial-process control systems \x96 Methods of evaluating the performance of valve positioners with pneumatic outputs | |
| Installation couplers intended for permanent connection in fixed installations | |
| Installations for electroheating and electromagnetic processing \x96 Test methods for electroslag remelting furnaces | |
| Insulating liquids \x96 Specifications for unused liquids based on synthetic aromatic hydrocarbons | |
| Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 2: Methods of test | |
| Insulators for overhead lines \x96 Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 v \x96 Definitions, test methods and acceptance criteria | |
| Lamps and light sources for road vehicles \x96 Dimensional, electrical and luminous requirements | |
| Live working \x96 Conformity assessment applicable to tools, devices and equipment | |
| Live working \x96 Electrical insulating gloves | |
| Live working \x96 Electrical insulating matting | |
| Live working \x96 Minimum approach distances \x96 Part 2: A method of determination for AC system 1,0 to 72,5 kV | |
| Live working \x96 Voltage detectors \x96 Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. | |
| Low voltage surge protective devices \x96 Part 21: Surge protective devices connected to telecommunications and signalling networks \x96 Requirements and testing methods | |
| Low-voltage surge protective components \x96 Part 361: Surge isolation transformers (SITs) connected to low-voltage distribution system \x96 Requirements and test methods | |
| Low-voltage surge protective devices \x96 Part 01: General requirements and test methods | |
| Low-voltage surge protective devices \x96 Part 41: Surge protective devices connected to DC low-voltage power systems \x96 Requirements and test methods | |
| Low-voltage switchgear and controlgear \x96 Active arc-fault mitigation systems \x96 Part 9-2: Optical-based internal arc-detection and mitigation devices | |
| Low-voltage switchgear and controlgear \x96 Part 10: Semiconductor Circuit-Breakers | |
| Low-voltage switchgear and controlgear \x96 Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear \x96 Part 4-1: Contactors and motor-starters \x96 Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear \x96 Part 4-3: Contactors and motor-starters \x96 Semiconductor controllers and semiconductor contactors for non-motor loads | |
| Low-voltage switchgear and controlgear \x96 Part 5-1: Control circuit devices and switching elements \x96 Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear \x96 Part 5-3: Control circuit devices and switching elements \x96 Requirements for proximity devices with defined behaviour under fault conditions (PDDB) | |
| Low-voltage switchgear and controlgear \x96 Part 5-5: Control circuit devices and switching elements \x96 Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear \x96 Part 5-7: Control circuit devices and switching elements \x96 Requirements for proximity devices with analogue output | |
| Low-voltage switchgear and controlgear \x96 Part 5-8: Control circuit devices and switching elements \x96 Three-position enabling switches | |
| Low-voltage switchgear and controlgear \x96 Part 6-1: Multiple function equipment \x96 Transfer switching equipment | |
| Low-voltage switchgear and controlgear \x96 Part 6-2: Multiple function equipment \x96 Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear \x96 Part 7-1: Ancillary equipment \x96 Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear \x96 Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 2: Power switchgear and controlgear assemblies | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 3: Distribution boards intended to be operated by ordinary persons (DBO) | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 4: Particular requirements for assemblies for construction sites (ACS) | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 5: Assemblies for power distribution in public networks | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 8: Assemblies for use in photovoltaic installations | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 1: Single talker and multiple listeners | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 2: Single talker and multiple listeners, high-speed transmission | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 450: Multiple talkers and multiple listeners \x96 Ethernet interconnection | |
| Maritime navigation and radiocommunication equipment and systems \x96 Global navigation satellite systems (GNSS) \x96 Part 5: BeiDou navigation satellite system (BDS) \x96 Receiver equipment \x96 Performance requirements, methods of testing... | |
| Marking on ferrite cores | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-51: Reinforced base materials, clad and unclad \x96 Base materials for Integrated Circuit card carrier tape, unclad | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-52: Reinforced base materials clad and unclad \x96 Thermosetting hydrocarbon resin system, woven e-glass reinforced laminate sheets of defined flammability... | |
| Materials for printed boards and other interconnecting structures \x96 Part 2-53: Reinforced base materials clad and unclad \x96 PTFE unfilled laminate sheets of defined flammability (vertical burning test), copper-clad | |
| Materials for printed boards and other interconnecting structures \x96 Part 3-6: Sectional specification set for unreinforced base materials, clad and unclad \x96 PTFE filled laminate sheets of defined flammability (vertical... | |
| Materials for printed boards and other interconnecting structures \x96 Part 6-3: Sectional specification set for reinforcement materials \x96 Specification for finished fabric woven from \x93E\x94 glass for printed boards | |
| Mechanical structures for electrical and electronic equipment \x96 Tests for IEC 60917 and IEC 60297 series \x96 Part 1: Environmental requirements, test set-up and safety aspects | |
| Mechanical structures for electrical and electronic equipment \x96 Tests for IEC 60917 and IEC 60297 series \x96 Part 6: Security aspects for indoor cabinets | |
| Medical diagnostic x-ray equipment \x96 Radiation conditions for use in the determination of characteristics | |
| Medical electrical equipment \x96 Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging | |
| Medical electrical equipment \x96 Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology | |
| Modular order for the development of mechanical structures for electronic equipment practices \x96 Part 1: Generic standard | |
| Nuclear facilities \x96 Instrumentation and control systems \x96 Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use during normal operation and anticipated operational... | |
| Nuclear power plants \x96 Instrumentation and control important to safety \x96 Hardware design requirements for computer-based systems | |
| Nuclear power plants \x96 Instrumentation, control and electrical power systems \x96 Requirements for static uninterruptible DC and AC power supply systems | |
| Nuclear power plants \x96 Instrumentation, control and electrical power systems important to safety \x96 Categorization of functions and classification of systems | |
| Optical amplifiers \x96 Part 2: Single channel applications \x96 Performance specification template | |
| Optical amplifiers \x96 Test methods \x96 Part 1-1: Power and gain parameters \x96 Optical spectrum analyzer method | |
| Optical amplifiers \x96 Test methods \x96 Part 1-2: Power and gain parameters \x96 Electrical spectrum analyzer method | |
| Optical amplifiers \x96 Test methods \x96 Part 1-3: Power and gain parameters \x96 Optical power meter method | |
| Optical amplifiers \x96 Test methods \x96 Part 1: Power and gain parameters | |
| Optical fibre cables \x96 Basic optical cable test procedures \x96 Part 310: Cable element test methods \x96 Strippability, Methods G10 | |
| Optical fibre cables \x96 Basic optical cable test procedures \x96 Part 401: Electrical test methods \x96 Short-circuit test (for OPGW, OPPC and OPAC), Method H1 | |
| Optical Fibre Cables \x96 Basic optical cable test procedures \x96 Part 402: Electrical test methods \x96 Lightning test (for OPGW, OPPC and OPAC), Method H2 | |
| Optical Fibre Cables \x96 Basic optical cable test procedures \x96 Part 403: Electrical test methods \x96 Electrical continuity test of cable metallic elements, Method H3 | |
| Optical fibre cables \x96 Part 1-101: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Tensile, method E1 | |
| Optical fibre cables \x96 Part 1-102: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Abrasion, method e2 | |
| Optical fibre cables \x96 Part 1-104: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests method \x96 Impact, method E4 | |
| Optical fibre cables \x96 Part 1-107: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical test methods \x96 Torsion, Method E7 | |
| Optical fibre cables \x96 Part 1-110: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Kink, Method E10 | |
| Optical fibre cables \x96 Part 1-111: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Bend, method E11 | |
| Optical fibre cables \x96 Part 1-118: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Bending under tension, Method E18 | |
| Optical fibre cables \x96 Part 1-119: Generic specification \x96 Basic optical cable test procedures \x96 Aeolian vibration, method e19 | |
| Optical fibre cables \x96 Part 1-121: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Sheath pull-off force for optical fibre cable for use in patch... | |
| Optical fibre cables \x96 Part 1-122: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Buffered fibre movement under compression in optical fibre cables for use... | |
| Optical fibre cables \x96 Part 1-124: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Installation test for microduct cabling, Method E24 | |
| Optical fibre cables \x96 Part 1-125: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Ripcord functional test, method e25 | |
| Optical fibre cables \x96 Part 1-126: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Galloping, method e26 | |
| Optical fibre cables \x96 Part 1-127: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Indoor simulated installation test, method e27 | |
| Optical fibre cables \x96 Part 1-128: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Cable and fibre mechanical reliability test, Method E28 | |
| Optical fibre cables \x96 Part 1-129: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Straight midspan access to optical elements, method e29 | |
| Optical fibre cables \x96 Part 1-130: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Coefficient of dynamic friction between cables, Methods E30 | |
| Optical fibre cables \x96 Part 1-131: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods \x96 Microduct inner clearance test, method e31 | |
| Optical fibre cables \x96 Part 1-133: Generic specifications \x96 Basic optical cable test procedures \x96 Mechanical test methods \x96 Multiple cable coiling and uncoiling performance, method E33 | |
| Optical fibre cables \x96 Part 1-136: Generic specification \x96 Basic optical cable test procedures \x96 Determination of the maximum applicable push force during cable installation by blowing | |
| Optical fibre cables \x96 Part 1-1: Generic specification \x96 General | |
| Optical fibre cables \x96 Part 1-201: Generic specification \x96 Basic optical cable test procedures \x96 Temperature cycling, Method F1 | |
| Optical fibre cables \x96 Part 1-205: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Water penetration, method F5 | |
| Optical fibre cables \x96 Part 1-208: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Pneumatic resistance, method F8 | |
| Optical fibre cables \x96 Part 1-209: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Ageing, Method F9 | |
| Optical fibre cables \x96 Part 1-210: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Underwater cable resistance to hydrostatic pressure, method f10 | |
| Optical fibre cables \x96 Part 1-211: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Sheath shrinkage, Method F11 | |
| Optical fibre cables \x96 Part 1-212: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Temperature cycling with cable elements fixed at both ends, Method F12... | |
| Optical fibre cables \x96 Part 1-213: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Microduct pressure withstand, Method F13 | |
| Optical fibre cables \x96 Part 1-214: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Cable UV resistance test, method F14 | |
| Optical Fibre Cables \x96 Part 1-215: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Cable external freezing test, Method F15 | |
| Optical fibre cables \x96 Part 1-216: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Compound flow (drip), method F16 | |
| Optical fibre cables \x96 Part 1-217: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Cable shrinkage (fibre protrusion), Method F17 | |
| Optical fibre cables \x96 Part 1-218: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Mid-span temperature cycling test for exposed optical units, Method F18 | |
| Optical fibre cables \x96 Part 1-219: Generic specification \x96 Basic optical cable test procedures \x96 Material compatibility test, Method F19 | |
| Optical fibre cables \x96 Part 1-220: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods \x96 Salt spray Corrosion test, Method F20 | |
| Optical fibre cables \x96 Part 1-23: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods | |
| Optical fibre cables \x96 Part 1-2: Generic specification \x96 Basic optical cable test procedures \x96 General guidance | |
| Optical fibre cables \x96 Part 1-301: Generic specification \x96 Basic optical cable test procedures \x96 Cable elements test methods \x96 Bend test, Method G1 | |
| Optical fibre cables \x96 Part 1-302: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Ribbon dimensions and geometry \x96 Visual method, Method G2 | |
| Optical fibre cables \x96 Part 1-303: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Ribbon dimensions \x96 Aperture gauge, Method G3 | |
| Optical fibre cables \x96 Part 1-305: Generic specifications \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Ribbon tear (separability), Method G5 | |
| Optical fibre cables \x96 Part 1-306: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Ribbon torsion, Method G6 | |
| Optical fibre cables \x96 Part 1-307: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Tube kinking, method G7 | |
| Optical fibre cables \x96 Part 1-308: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Ribbon residual twist test, G8 | |
| Optical fibre cables \x96 Part 1-309: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods- Bleeding and evaporation of filling or flooding compounds, Method G9 | |
| Optical fibre cables \x96 Part 1-311: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Tensile strength and elongation test for cable elements, Method G11A... | |
| Optical fibre cables \x96 Part 1-312: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods \x96 Elongation test for buffer tubes, Method G11B | |
| Optical fibre cables \x96 Part 1-31: Generic specification \x96 Optical cable elements \x96 Optical fibre ribbon | |
| Optical fibre cables \x96 Part 1-404: Generic specification \x96 Basic optical cable test procedures \x96 Electrical test methods \x96 Current-temperature test, Method H4 | |
| Optical fibre cables \x96 Part 2-10: Indoor optical fibre cables \x96 Family specification for simplex and duplex cables | |
| Optical fibre cables \x96 Part 2-22: Indoor cables \x96 Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies | |
| Optical fibre cables \x96 Part 2-23: Indoor optical fibre cables \x96 Detailed specification for multi-fibre cables for use in MPO connector terminated cable assemblies | |
| Optical fibre cables \x96 Part 2-24: Indoor optical fibre cables \x96 Detailed specification for multiple multi-fibre unit cables for use in MPO connector terminated breakout cable assemblies | |
| Optical fibre cables \x96 Part 2-50: Indoor optical fibre cables \x96 Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Optical fibre cables \x96 Part 3-12: Outdoor cables \x96 Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling | |
| Optical fibre cables \x96 Part 3-40: Outdoor cables \x96 Family specification for cables for storm and sanitary sewers | |
| Optical fibre cables \x96 Part 3-70: Outdoor cables \x96 Family specification for outdoor optical fibre cables for rapid/multiple deployment | |
| Optical fibre cables \x96 Part 3: Outdoor cables \x96 Sectional specification | |
| Optical Fibre Cables \x96 Part 4-30: Aerial optical cables along electrical power lines \x96 Family Specification for OPPC (Optical Phase Conductor) | |
| Optical Fibre Cables \x96 Part 6-10: Indoor-Outdoor cables \x96 Family specification for a Universal Indoor-Outdoor cable | |
| Optical Fibre Cables \x96 Part 6-20: Indoor-Outdoor cables \x96 Family specification for Flame Retardant Outdoor cables | |
| Optical Fibre Cables \x96 Part 6-30: Indoor-Outdoor cables \x96 Family specification for Weatherized Indoor cables | |
| Optical Fibre Cables \x96 Part 6: Indoor-Outdoor cables \x96 Sectional specification for Indoor-Outdoor cables | |
| Optical fibres \x96 Part 1-1: Measurement methods and test procedures \x96 General and guidance | |
| Optical fibres \x96 Part 1-22: Measurement methods and test procedures \x96 Length measurement | |
| Optical fibres \x96 Part 1-34: Measurement methods and test procedures \x96 Fibre curl | |
| Optical fibres \x96 Part 1-40: Attenuation measurement methods | |
| Optical fibres \x96 Part 1-44: Measurement methods and test procedures \x96 Cut-off wavelength | |
| Optical fibres \x96 Part 1-46: Measurement methods and test procedures \x96 Monitoring of changes in attenuation | |
| Optical fibres \x96 Part 2-10: Product specifications \x96 Sectional specification for category A1 multimode fibres | |
| Optical fibres \x96 Part 2-40: Product specifications \x96 Sectional specification for category A4 multimode fibres | |
| Optical fibres \x96 Part 2-60: Product specifications \x96 Sectional specification for category C single-mode interconnection fibres | |
| Optical fibres \x96 Part 2: Product specifications \x96 General | |
| Panel mounted equipment \x96 Electrical measuring instruments \x96 Dimensions for panel mounting | |
| Passive filter units for electromagnetic interference suppression \x96 Part 3: Passive filter units for which safety tests are appropriate | |
| Photovoltaic devices \x96 Part 10: Methods of linear dependence and linearity measurements | |
| Photovoltaic devices \x96 Part 1: Measurement of photovoltaic current-voltage characteristics | |
| Photovoltaic devices \x96 Part 2: Requirements for photovoltaic reference devices | |
| Photovoltaic devices \x96 Part 9: Classification of solar simulator characteristics | |
| Photovoltaic devices \x96 Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Photovoltaic system performance \x96 Part 1: Monitoring | |
| Portable residual current devices (PRCDs) without integral overcurrent protection for household and similar use | |
| Process measurement and control devices \x96 General methods and procedures for evaluating performance \x96 Part 1: General considerations | |
| Process measurement and control devices \x96 General methods and procedures for evaluating performance \x96 Part 2: Tests under reference conditions | |
| Process measurement and control devices \x96 General methods and procedures for evaluating performance \x96 Part 3: Tests for the effects of influence quantities | |
| Programmable controllers \x96 Part 3: Programming languages | |
| Programmable controllers \x96 Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | |
| Radiation protection instrumentation \x96 Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs | |
| Radiation protection instrumentation \x96 Measurement of personal dose equivalents for X, gamma, neutron and beta radiations \x96 Active personal dosemeters | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-1: Sectional specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-2: Blank detail specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-8: Detail specification for cable assemblies for radio and TV receivers \x96 Frequency range up to 3000 MHz, screening class A++, IEC... | |
| Radio frequency and coaxial cable assemblies \x96 Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 3-3: Detail specification for semi-flexible cable assemblies (jumper), Frequency range up to 18GHz, Type 50-141 semi-flexible coaxial cable | |
| Radio frequency and coaxial cable assemblies \x96 Part 3-4: Detail specification for semi-flexible cable assemblies (jumper), Frequency range up to 6GHz, Type 50-141 semi-flexible coaxial cable | |
| Radio frequency and coaxial cable assemblies \x96 Part 3: Sectional specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 4-2: Detail specification for semi rigid cable assemblies (jumper), Frequency range up to 6000MHz, Type 50-9 semi-rigid coaxial cable, applicable to ISO/IEC... | |
| Radio frequency and coaxial cable assemblies \x96 Part 4-3: Detail specification for semi-rigid cable assemblies, Frequency range up to 6000MHz, Type 50-12 low loss semi-rigid coaxial cable, applicable to ISO/IEC... | |
| Radio frequency and coaxial cable assemblies \x96 Part 4-4: Detail specification for multi channel semi-rigid cable assemblies, frequency up to 6000mhz, with type 50-5 semi-rigid coaxial cable | |
| Radio frequency and coaxial cable assemblies \x96 Part 4: Sectional specification for semi-rigid coaxial cable assemblies | |
| Radio frequency connectors \x96 Part 1-5: Electrical test methods \x96 Rise time degradation | |
| Radio frequency connectors \x96 Part 1-6: Electrical test methods- RF power | |
| Radio frequency connectors \x96 Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms, Series 4.3-10 | |
| Radio frequency connectors \x96 Part 63: Sectional specification \x96 RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock \x96 Characteristic impedance 75 ohms... | |
| Radio frequency connectors \x96 Part 64: Sectional specification \x96 RF coaxial connectors with 0,8 mm inner diameter of outer conductor \x96 Characteristic impedance 50 ? (type 0,8) | |
| Radio frequency connectors \x96 Part 67: Sectional specification for series TRL threaded triaxial connectors | |
| Radio Frequency Connectors- Part 69: Sectional specification for series SMP3 RF coaxial connectors | |
| Radio-frequency connectors \x96 Part 1-3: Electrical test methods \x96 Surge withstand \x96 Surge protective devices built-in coaxial connector \x96 Performance requirements and testing methods | |
| Radio-frequency connectors \x96 Part 1-4: Electrical test methods- voltage standing wave ratio, return loss and reflection coefficient | |
| Radio-frequency connectors \x96 Part 17: RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with screw coupling \x96 Characteristic impedance 50 ohms (Type TNC) | |
| Radio-frequency connectors \x96 Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling-Characteris tic impedance 50 ohms (Type SC) | |
| Radio-frequency connectors \x96 Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in) | |
| Radio-frequency connectors \x96 Part 60: Sectional specifications RF coaxial connectors with inner diameter of outer conductors mm with Push on mating \x96 Characteristics impedance 50 Ohm (type SMPM) | |
| RADIO-FREQUENCY CONNECTORS \x96 Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors | |
| Radio-frequency connectors \x96 Part 74: Sectional specification for HN series RF coaxial connectors with screw coupling \x96 Characteristic impedance 50 ohms | |
| Radio-frequency connectors Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors \x96 Characteristic Impedance 75 ohms | |
| Radio-frequency connectors- Part 1-9: Mechanical test methods- Safety wire hole pull-out | |
| Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling \x96 Characteristic impedance 50 ohms (Type SMB) | |
| Radio-frequency connectors. Part 15: R.F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in) with screw coupling \x96 Characteristic impedance 50 ohms (Type SMA) | |
| Radio-Frequency-Conn ectors \x96 Part 65: Sectional specification for RF coaxial connectors with 1,35mm inner diameter of outer conductor, with screw coupling, 50 Ohm characteristic impedance, for use up to 90... | |
| Radio-Frequency-Conn ectors, Part 66: Sectional specification for RF coaxial connectors with 5mm inner diameter of outer conductor, with screw- and snap-on coupling, 50 Ohm characteristic impedance, for use up to... | |
| Radionuclide imaging devices \x96 Characteristics and test conditions \x96 Part 1: Positron emission tomographs | |
| Radionuclide imaging devices \x96 Characteristics and test conditions \x96 Part 2: Gamma cameras for planar, wholebody, and SPECT imaging | |
| Railway applications \x96 Rolling stock \x96 Testing of rolling stock on completion of construction and before entry into service | |
| Railway applications \x96 Rolling stock equipment \x96 Shock and vibration tests | |
| Reliability testing \x96 Compliance test plans for success ratio | |
| Reliability testing \x96 Compliance tests for constant failure rate and constant failure intensity | |
| Residual current-operated protective devices (RCDs) for household and similar use \x96 Electromagnetic compatibility | |
| Rotating machinery \x96 Test methods and apparatus for the measurement of the operational characteristics of brushes | |
| Rules for steam turbine thermal acceptance tests \x96 Part 0: Wide range of accuracy for various types and sizes of turbines | |
| Rules for steam turbine thermal acceptance tests \x96 Part 3: Thermal performance verification tests of retrofitted steam turbines | |
| Safety of laser products \x96 Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of laser products \x96 Part 2: Safety of optical fibre communication systems (OFCSs) | |
| Safety of machinery \x96 Electro-sensitive protective equipment \x96 Part 3: Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) | |
| Safety of transformers, reactors, power supply units and combination thereof \x96 Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-20: Particular requirements and tests for small reactors | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for... | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-7: Particular requirements and tests for transformers and power supply units for toys | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-051: Particular requirements for laboratory equipment for mixing and stirring | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-202: Particular requirements for electrically operated valve actuators | |
| Safety requirements for electrical equipment for measurement, control and laboratory use \x96 Part 2-203: Particular requirements for industrial communication circuits and communication port interconnection | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-011: Particular requirements for refrigerating equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-020: Particular requirements for laboratory centrifuges | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-030: Particular requirements for equipment having testing or measuring circuits | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 2-201: Particular requirements for control equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Particular requirements for equipment intended to be used in educational establishments by children | |
| Salt mist corrosion testing of photovoltaic (PV) modules | |
| Secondary cells and batteries for renewable energy storage \x96 General requirements and methods of test \x96 Part 2: On-grid applications | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 10: Mechanical shock \x96 Device and subassembly | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 15: Resistance to soldering temperature for through-hole mounted devices | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 21: Solderability | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 22-1: Bond strength \x96 Wire bond pull test methods | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 22-2: Bond strength \x96 Wire bond shear test methods | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 23: High temperature operating life | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 24: Accelerated moisture resistance \x96 Unbiased hast | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 26: Electrostatic discharge (ESD) sensitivity testing \x96 Human body model (HBM) | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 28: Electrostatic discharge (ESD) sensitivity testing \x96 Charged device model (CDM) \x96 Device level | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 34-1: Power cycling test for power semiconductor module | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 37: Board level drop test method using an accelerometer | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 41: Standard reliability testing methods of non-volatile memory devices | |
| Semiconductor devices \x96 Mechanical and climatic test methods \x96 Part 5: Steady-state temperature humidity bias life test | |
| Semiconductor devices \x96 Part 16-8: Microwave integrated circuits \x96 Limiters | |
| Semiconductor devices \x96 Part 16-9: Microwave integrated circuits \x96 Phase shifters | |
| Semiconductor devices \x96 Part 17: Magnetic and capacitive coupler for basic and reinforced isolation | |
| Semiconductor devices \x96 Part 5-5: Optoelectronic devices \x96 Photocouplers | |
| Short-circuit currents in three-phase a.c. systems \x96 Part 0: Calculation of currents | |
| Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1000 v \x96 Part 1: General | |
| Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1000 v \x96 Part 2: Ageing test and destruction test | |
| Switches for appliances \x96 Part 1: General requirements | |
| Synthetic esters \x96 Guidelines for maintenance and use in electrical equipment | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1: Test requirements | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 2: Test procedures | |
| Test method for the mechanical strength of cores made of magnetic oxides | |
| Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-501: Test methods for materials for interconnection structures \x96 Measurement of Resilience strength and Resilience... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-720: Detection of defects in interconnection structures by measurement of capacitance | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-801: Thermal conductivity test for base materials | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-803: Test methods for Z-Axis Expansion of base materials and printed board | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-804: Test methods for time to delamination \x96 T260, T288, T300 | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-805: X/Y CTE Test for Thin Base Materials by TMA | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-807: Test methods for materials for interconnection structures \x96 Decomposition Temperature (Td) using TGA | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-808: Thermal resistance of an assembly by thermal transient method | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 2-809: X/Y Coefficient of Thermal Expansion Test (CTE) for Thick Base Materials by TMA | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies \x96 Part 3-302: Detection of plating defects in unpopulated circuit boards by computed tomography (CT) | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-301: Test methods for printed board assemblies \x96 Soldering paste using fine solder particles | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-501: General test methods for materials and assemblies \x96 Surface insulation resistance (SIR) testing of... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-502: General test methods for materials and assemblies \x96 Surface insulation resistance (SIR) testing of... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-504: General test methods for materials and assemblies \x96 Pocess ionic contamination testing (PICT) | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-601: General test methods for materials and assemblies \x96 Reflow soldering ability test for solder... | |
| Test on gases evolved during combustion of materials from cables \x96 Part 3: Measurement of low level of halogen content by ion chromatography | |
| Transformers and inductors for use in electronic and telecommunication equipment \x96 Measuring methods and test procedures | |
| Varistors for use in electronic equipment \x96 Part 2: Sectional specification for surge suppression varistors | |
| Wind energry generation systems \x96 Part 40: Electromagnetic compatibility (EMC) \x96 Requirements and test methods | |
| Wind energy generation systems \x96 Part 12-1: Power performance measurement of electricity producing wind turbines | |
| Wind energy generation systems \x96 Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry | |
| Wind energy generation systems \x96 Part 12-3: Power Performance \x96 Measurement Based Site Calibration | |
| Wind energy generation systems \x96 Part 12-5: Power performance \x96 Assessment of obstacles and terrain | |
| Wind energy generation systems \x96 Part 12-6: Measurement based nacelle transfer function of electricity producing wind turbines | |
| Wind energy generation systems \x96 Part 12: Power performance measurements of electricity producing wind turbines \x96 Overview | |
| Wind energy generation systems \x96 Part 15-1: Site suitability input conditions for wind power plants | |
| Wind energy generation systems \x96 Part 21-2: Measurement and assessment of electrical characteristics \x96 Wind power plants | |
| Wind energy generation systems \x96 Part 27-1: Electrical simulation models \x96 Generic models | |
| Wind energy generation systems \x96 Part 27-2: Electrical simulation models \x96 Model validation | |
| Wind energy generation systems \x96 Part 3-2: Design requirements for floating offshore wind turbines | |
| Wind energy generation systems \x96 Part 4: Design requirements for wind turbine gearboxes | |
| Wind energy generation systems \x96 Part 50-1: Wind Measurement \x96 Application of Meteorological Mast, Nacelle and Spinner Mounted Instruments | |
| Wind energy generation systems \x96 Part 50-2: Wind Measurement \x96 Application of Ground Mounted Remote Sensing Technology | |
| Wind energy generation systems \x96 Part 50-3: Use of nacelle mounted lidars for wind measurements | |
| Wind energy generation systems \x96 Part 50: Wind measurements | |
| Wind energy generation systems \x96 Part 8: Design of wind turbine structural components | |
| Winding wires \x96 Test methods \x96 Part 1: General | |
| Winding wires \x96 Test methods \x96 Part 3: Mechanical properties | |
| Winding wires \x96 Test methods \x96 Part 5: Electrical properties |
| << Prev | Next >> |