Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
670
680
690
700
710
720
725
726
727
728
729
730
731
732
733
734
735
736
737
740
750
760
770
780
790
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| 3D Display devices \x96 Part 41-1: Generic introduction of holographic display | |
| 3D display devices \x96 Part 51-1: Generic introduction of aerial display | |
| A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation | |
| Active assisted living (AAL) guidance for education and training of persons working in the field of AAL | |
| Active assisted living (AAL) use case standards inventory and mapping | |
| Active fibres \x96 Characteristics and measurement methods \x96 Guidance | |
| Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment | |
| Adjusted volume calculation for refrigerating appliances | |
| Alarm systems \x96 Part 7-8: Message formats and protocols for serial data interfaces in alarm transmission systems \x96 Requirements for common protocol for alarm transmission using the Internet protocol | |
| Amendment 1 \x96 Code of practice for hearing-loop systems (HLS) | |
| Amendment 1 \x96 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 4: Typical values | |
| Amendment 2 \x96 Code of practice for hearing-loop systems (HLS) | |
| Analyser systems \x96 Maintenance management | |
| Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems | |
| Application guidelines for nonlinear coefficient measuring methods | |
| Application integration at electric utilities - System interfaces for distribution management - Part 900: Guidance for implementation of IEC 61968-9 | |
| Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires | |
| Application of risk management for IT-networks incorporating medical devices - Part 2-1: Step-by-step risk management of medical IT-networks - Practical applications and examples | |
| Application of risk management for IT-networks incorporating medical devices - Part 2-2: Guidance for the disclosure and communication of medical device security needs, risks and controls | |
| Application of risk management for IT-networks incorporating medical devices - Part 2-3: Guidance for wireless networks | |
| Application of risk management for IT-networks incorporating medical devices - Part 2-4: Application guidance - General implementation guidance for healthcare delivery organizations | |
| Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-8: Application guidance \x96 Guidance on standards for establishing the security capabilities identified in IEC TR 80001-2-2 | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-9: Application guidance \x96 Guidance for use of security assurance cases to demonstrate confidence in IEC TR 80001-2-2 security... | |
| Assessment methods of the human exposure to electric and magnetic fields from wireless power transfer systems \x96 Models, instrumentation, measurement and numerical methods and procedures (frequency range of 1 kHz... | |
| Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields | |
| Assessment of lighting equipment related to human exposure to electromagnetic fields - Part 1: Results of the EMF measurement campaign from the VDE Test and Certification Institute and ZVEI, the... | |
| Assignment of a safety integrity requirements \x96 Basic rationale | |
| Audio/video, information and communication technology equipment \x96 Part 2: Explanatory information related to IEC 62368-1:2023 | |
| Audio/video, information and communication technology equipment \x96 Part 2: Explanatory information related to IEC 62368-1 | |
| Automatic speech recognition: Classification according to acoustic and linguistic indicators in real-life applications | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 3-2: Method of measurement of 5th order non-linearity for active electronic equipment using five carriers | |
| Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide | |
| Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires \x96 Application guide | |
| Calculation of maximum external diameter of cables for indoor installations | |
| Case studies supporting IEC 62232 - Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Chemometrics for process analytical technologies \x96 Part 1: General provisions, and methods for univariate statistics and chemometric processing of data | |
| City needs analysis framework | |
| Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction | |
| Classification of environmental conditions \x96 Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 \x96 Stationary use... | |
| Clothes washing machines for household use - Method for measuring the microbial contamination reduction | |
| Code of practice for hearing-loop systems (HLS) | |
| Common automation device - Profile guideline | |
| Communication networks and systems for power utility automation - Part 80-3: Mapping to web protocols - Requirements and technical choices | |
| Communication networks and systems for power utility automation - Part 90-2: Using IEC 61850 for communication between substations and control centres | |
| Communication networks and systems for power utility automation \x96 Part 10-3: Functional testing of IEC 61850 systems | |
| Communication networks and systems for power utility automation \x96 Part 1: Introduction and overview | |
| Communication networks and systems for power utility automation \x96 Part 7-500: Basic information and communication structure \x96 Use of logical nodes for modeling application functions and related concepts and guidelines... | |
| Communication networks and systems for power utility automation \x96 Part 7-510: Basic communication structure \x96 Hydroelectric power plants, steam and gas turbines \x96 Modelling concepts and guidelines | |
| Communication networks and systems for power utility automation \x96 Part 7-5: IEC 61850 modelling concepts | |
| Communication networks and systems for power utility automation \x96 Part 7-6: Guideline for definition of Basic Application Profiles (BAPs) using IEC 61850 | |
| Communication networks and systems for power utility automation \x96 Part 90-10: Models for scheduling | |
| Communication networks and systems for power utility automation \x96 Part 90-11: Methodologies for modelling of logics for IEC 61850 based applications | |
| Communication networks and systems for power utility automation \x96 Part 90-12: Wide area network engineering guidelines | |
| Communication networks and systems for power utility automation \x96 Part 90-13: Deterministic networking technologies | |
| Communication networks and systems for power utility automation \x96 Part 90-14: Using IEC 61850 for FACTS (flexible alternate current transmission systems), HVDC (high voltage direct current) transmission and power conversion... | |
| Communication networks and systems for power utility automation \x96 Part 90-17: Using IEC 61850 to transmit power quality data | |
| Communication networks and systems for power utility automation \x96 Part 90-20: Use cases of redundancy in systems | |
| Communication networks and systems for power utility automation \x96 Part 90-22: SCD based substation network automated management with visualization and supervision support | |
| Communication networks and systems for power utility automation \x96 Part 90-27: Use of IEC 61850 for thermal energy systems connected to electric power grid | |
| Communication networks and systems for power utility automation \x96 Part 90-30: IEC 61850 Function Modelling in SCL | |
| Communication networks and systems for power utility automation \x96 Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis | |
| Communication networks and systems for power utility automation \x96 Part 90-4: Network engineering guidelines | |
| Communication networks and systems for power utility automation \x96 Part 90-6: Use of IEC 61850 for Distribution Automation Systems | |
| Communication networks and systems for power utility automation \x96 Part 90-7: Object models for power converters in distributed energy resources (DER) systems | |
| Communication networks and systems for power utility automation \x96 Part 90-8: Object model for E-mobility | |
| Communication networks and systems for power utility automation \x96 Part 90-9: Use of IEC 61850 for Electrical Energy Storage Systems | |
| Communication networks and systems in power utility automations \x96 Part 90-16: Requirements of system management for Smart Energy Automation | |
| Conceptual framework of power system resilience | |
| Conceptual model of standardization for multimedia car systems and equipment | |
| Conductive charging of electric vehicles \x96 DC vehicle coupler configuration GG | |
| Conductors of insulated cables - Data for AWG and KCMIL sizes | |
| Connectivity for lighting systems | |
| Consideration of energy efficiency in wireless power transfer technology | |
| Conversion method of specific absorption rate to absorbed power density for the assessment of human exposure to radio frequency electromagnetic fields from wireless devices in close proximity to the head... | |
| Corrigendum 1 \x96 Communication networks and systems for power utility automation \x96 Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes \x96 Part 100: Requirements and proposals for the IEC 61850 series data model extensions to support... | |
| Damp heat, steady state (unsaturated pressurized vapour with air) | |
| Decentralized electrical energy systems roadmap | |
| Definition of extended SGAM smart energy grid reference architecture model | |
| Dependability of software products containing reusable components - Guidance for functionality and tests | |
| Derisking photovoltaic modules \x96 Sequential and combined accelerated stress testing | |
| Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation | |
| Determination of long-term radiation ageing in polymers \x96 Part 4: Effects of different temperatures and dose rates under radiation conditions | |
| Dimming and hot restrike of metal halide lamps | |
| Display lighting unit \x96 Part 1-3: Lighting units with arbitrary shapes | |
| Display lighting unit \x96 Part 1-4: Glass light guide plate | |
| Display lighting unit \x96 Part 1-5: Electrical signal interface of LED BLU | |
| Durability test methods for electronic displays \x96 Part 2-12: Environmental tests \x96 Environmental conditions of use, storage and transportation of electronic displays | |
| Dynamic characteristics of inverter-based resources in bulk power systems \x96 Part 1: Interconnecting inverter-based resources to low short circuit ratio AC networks | |
| Dynamic characteristics of inverter-based resources in bulk power systems \x96 Part 2: Sub- and Super-synchronous control Interactions | |
| Dynamic characteristics of inverter-based resources in bulk power systems \x96 Part 3: Fast frequency response and frequency ride-through from inverter-based resources during severe frequency disturbances | |
| Dynamic characteristics of inverter-based resources in bulk power systems \x96 Part 4: Behaviour of inverter-based resources in response to bulk grid faults | |
| Dynamic modules - Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators | |
| Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules | |
| Dynamic modules - Part 6-7: Design guide - Optical channel monitor | |
| Dynamic modules - Part 6-9: Design guide - Study of mechanisms and measurements of crosstalk in wavelength-selective switches | |
| Dynamic modules \x96 Part 6-10: Design guide \x96 Intermediate controller for multiple dynamic module systems | |
| Dynamic Modules \x96 Part 6-11: Design guidelines \x96 Software and hardware interface for optical multicast switches | |
| Dynamic modules \x96 Part 6-12: Design guidelines \x96 Survey results on performance specifications for 1 x N wavelength selective switches | |
| Dynamic modules \x96 Part 6-4: Design guides \x96 Reconfigurable optical add/drop multiplexer | |
| Dynamic modules \x96 Part 6-6: Design guide \x96 Failure mode effect analysis for optical units of dynamic modules | |
| Effects of current on human beings and livestock \x96 Part 2: Special aspects | |
| Effects of current on human beings and livestock \x96 Part 4: Effects of lightning strokes | |
| Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet ) applications | |
| Electric components \x96 Reliability \x96 Failure rates at reference conditions | |
| Electric vehicles conductive power supply system \x96 Part 3-3: Requirements for light electric vehicles \x96 Battery swap systems | |
| Electrical accessories \x96 Harmonization of general rules | |
| Electrical installation guide - Part 53: Selection and erection of electrical equipment - Switchgear and controlgear | |
| Electrical installation guide \x96 Part 101: Application guidelines on extra-low-voltage direct current electrical installations not intended to be connected to a public distribution network | |
| Electrical installation guide \x96 Part 102: Application guidelines for low-voltage direct current electrical installations not intended to be connected to a public distribution network | |
| Electrical installation guide \x96 Part 52: Selection and erection of electrical equipment \x96 Wiring systems | |
| Electrical installations in ships \x96 Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables | |
| Electrical insulating materials \x96 Thermal endurance properties \x96 Part 7-2: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) \x96 Results of the round robin tests to validate... | |
| Electrical insulating materials \x96 Thermal endurance properties \x96 Part 7-2: Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data... | |
| Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy | |
| Electrical insulation systems \x96 Thermal evaluation of modifications to an established electrical insulation system (EIS) \x96 Part 3: Clarification of electrical insulating materials (EIMs) and auxiliary materials | |
| Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems | |
| Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM | |
| Electricity metering - Payment systems - Part 21: Framework for standardization | |
| Electricity metering \x96 Data exchange for meter reading, tariff and load control \x96 Glossary of terms \x96 Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM | |
| Electricity metering equipment - Dependability - Part 11: General concepts | |
| Electroacoustics \x96 Measurement microphones \x96 Part 10: Absolute pressure calibration of microphones at low frequencies using calculable pistonphones | |
| Electroacoustics \x96 Simulators of human head and ear \x96 Part 7: Head and torso simulator for the measurement of air-conduction hearing aids | |
| Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions | |
| Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks | |
| Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results | |
| Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments | |
| Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A | |
| Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium | |
| Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems | |
| Electromagnetic compatibility (EMC) - Part 5-8: Installation and mitigation guidelines - HEMP protection methods for the distributed infrastructure | |
| Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling | |
| Electromagnetic compatibility (EMC) \x96 Calibration and verification protocol for harmonic emission compliance test systems | |
| Electromagnetic compatibility (EMC) \x96 Part 1-1: General \x96 Application and interpretation of fundamental definitions and terms | |
| Electromagnetic compatibility (EMC) \x96 Part 1-2: General \x96 Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | |
| Electromagnetic compatibility (EMC) \x96 Part 1-4: General \x96 Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz | |
| Electromagnetic compatibility (EMC) \x96 Part 1-9: General \x96 Evaluation of uncertainty for the measurement of harmonic current emissions | |
| Electromagnetic compatibility (EMC) \x96 Part 2-5: Environment \x96 Description and classification of electromagnetic environments | |
| Electromagnetic compatibility (EMC) \x96 Part 3-16: Limits \x96 Limits for harmonic currents produced by the inverter of inverter-type electrical energy-supplying equipment with a reference current less than or equal to... | |
| Electromagnetic compatibility (EMC) \x96 Part 3-18: Limits \x96 Assessment of network characteristics for the application of harmonic emission limits \x96 Equipment connected to LV distribution systems not covered by IEC... | |
| Electromagnetic compatibility (EMC) \x96 Part 3-5: Limits \x96 Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A | |
| Electromagnetic compatibility (EMC) \x96 Part 4-40: Testing and measurement techniques \x96 Digital methods for the measurement of power quantities of modulated or distorted signals | |
| Electromagnetic compatibility (EMC) \x96 Part 5-10: Installation and mitigation guidelines \x96 Guidance on the protection of facilities against HEMP and IEMI | |
| Electromagnetic compatibility (EMC) \x96 Part 5-1: Installation and mitigation guidelines \x96 General considerations | |
| Electromagnetic compatibility (EMC) \x96 Part 5: Installation and mitigation guidelines \x96 Section 1: General considerations | |
| Electromagnetic compatibility (EMC) \x96 Part 6-5: Generic standards \x96 Immunity for power station and substation environments | |
| Electromagnetic compatibility \x96 Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply networks \x96 Future expectations | |
| Electromagnetic compatibility \x96 Part 2-15: Description of the characteristics of networks with high penetration of power electronic converters | |
| Electromagnetic compatibility of electrical and electronic installations in ships | |
| Electronic displays \x96 Part 1-31: Generic \x96 Practical information for use of light measuring devices | |
| Electronic displays \x96 Part 2-4: Transparent displays \x96 Overview of application scenarios | |
| Electronic displays \x96 Part 5-2: Visual assessment \x96 Colour discrimination according to viewing direction | |
| Electronic displays devices \x96 Part 2-5: Transparent displays \x96 Measurements of optical characteristics | |
| Electronic displays for special applications \x96 Part 1: General introduction | |
| Electronic displays for special applications \x96 Part 2: Elevator and escalator | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-7: Wireless Train Backbone (WLTB) | |
| Electronic railway equipment \x96 Train communication network (TCN) \x96 Part 2-4: TCN application profile | |
| Electrostatics \x96 Part 5-4: Protection of electronic devices from electrostatic phenomena \x96 Compliance verification | |
| Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines | |
| EMC \x96 Part 5-6: Installation and migration guidelines \x96 Mitigation of external EM influences | |
| Energy and data interfaces of users connected to the smart grid with other smart grid stakeholders \x96 Standardization landscape | |
| Energy efficiency through automation systems | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 7: Transportation by rotary wing aircraft | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 8: Transportation by ship | |
| Environmental declaration \x96 Part 1: Wires, cables and accessory products \x96 Specific rules | |
| Environmental declaration \x96 Part 2: Optical/copper telecom accessories products specific rules | |
| Equipment for general lighting purposes \x96 EMC immunity requirements \x96 Part 1: An objective voltage fluctuation immunity test method | |
| Equipment for general lighting purposes \x96 Objective test method for stroboscopic effects of lighting equipment | |
| Ethical considerations of artificial intelligence (AI) when applied in the active assisted living (AAL) context | |
| Explanation of the mathematical addition of working voltages, insulation between circuits and use of PELV in TC 34 standards | |
| Explosive atmospheres \x96 Part 40: Requirements for process sealing between flammable process fluids and electrical systems | |
| Explosive atmospheres \x96 Part 42: Electrical safety devices for equipment | |
| Explosive atmospheres \x96 Part 44: Personal competence | |
| Explosive atmospheres \x96 Part 46: Equipment assemblies | |
| Explosive atmospheres \x96 Part 47: Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE) | |
| Explosive atmospheres \x96 Part 48 \x96 Portable or Personal Electronic Equipment \x96 Guide for the use of equipment without a certificate for use in Hazardous Areas | |
| Exposure assessment methods for wireless power transfer systems | |
| Eyewear display \x96 Part 1-1: Generic introduction | |
| Fibre optic active components and devices \x96 Reliability standards \x96 Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers | |
| Fibre optic communication system design guidelines \x96 Part 14: Determination of the uncertainties of attenuation measurements in fibre plants | |
| Fibre optic communication system design guidelines \x96 Part 16: Coherent receivers and transmitters with high-speed digital signal processing | |
| Fibre optic communication system design guidelines \x96 Part 5: Accommodation and compensation of chromatic dispersion | |
| Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude | |
| Fibre optic communication system design guides - Part 12: In-band optical signal-to-noise ratio (OSNR) | |
| Fibre optic communication system design guides - Part 13: Guidance on in-service PMD and CD characterization of fibre optic links | |
| Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion | |
| Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects | |
| Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems | |
| Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion | |
| Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory | |
| Fibre optic communication system design guides \x96 Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude | |
| Fibre optic communication system design guides \x96 Part 14: Determination of the uncertainties of attenuation measurements in fibre plants | |
| Fibre optic communication system design guides \x96 Part 15: Cable plant and link \x96 Testing multi-fibre optic cable plant terminated with MPO connectors | |
| Fibre optic communication system design guides \x96 Part 5: Accomodation and compensation of dispersion | |
| Fibre optic interconecting devices and passive components - Part 03-04: Reliability - Guideline for high power reliability of passive optical components | |
| Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods | |
| Fibre optic interconnecting devices and passive components - Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter | |
| Fibre optic interconnecting devices and passive components \x96 Part 01: Fibre optic connector cleaning methods | |
| Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation | |
| Field device tool (FDT) interface specification \x96 Part 41: Object model integration profile \x96 Common object model | |
| Field device tool (FDT) interface specification \x96 Part 42: Object model integration profile \x96 Common Language Infrastructure | |
| Field device tool (FDT) interface specification \x96 Part 62: Field device tool (FDT) styleguide for common language infrastructure | |
| Fire hazard testing - Part 11-4: Test flames - 50 W flames - Apparatus and confirmational test method | |
| Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results | |
| Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods | |
| Fire hazard testing \x96 Part 11-11: Test flames \x96 Determination of the characteristic heat flux for ignition from a non-contacting flame source | |
| Fire hazard testing \x96 Part 11-40: Test flames \x96 Confirmatory tests \x96 Guidance | |
| Fire hazard testing \x96 Part 5-2: Corrosion damage effects of fire effluent \x96 Summary and relevance of test methods | |
| Fire performance of communication cables installed in buildings | |
| Flexible displays \x96 Part 5-61: Overview of measurement and application scenarios of stretchable displays | |
| Framework for energy market communications \x96 Part 101: General guidelines | |
| Framework for energy market communications \x96 Part 102: Energy market model example | |
| Framework for energy market communications \x96 Part 103: Review of information exchanges within the deregulated European style retail energy market from a CIM perspective | |
| Framework for energy market communications \x96 Part 501: General guidelines for use of ebXML | |
| Function blocks for industrial-process measurement and control systems - Part 3: Tutorial information | |
| Functional architecture of industrial internet system for industrial automation applications | |
| Functional safety \x96 Safety instrumented systems for the process industry sector \x96 Part 0: Functional safety for the process industry and IEC 61511 | |
| Functional safety \x96 Safety instrumented systems for the process industry sector \x96 Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2 | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems \x96 Part 0: Functional safety and IEC 61508 | |
| General testing procedures for medical electrical equipment | |
| Generic smart grid requirements \x96 Part 1: Specific application of the Use Case methodology for defining generic smart grid requirements according to the IEC systems approach | |
| Generic smart grid requirements \x96 Part 2-1: Grid related domains | |
| Generic smart grid requirements \x96 Part 2-2: Market related domain | |
| Generic smart grid requirements \x96 Part 2-3: Resources connected to the grid domains | |
| Generic smart grid requirements \x96 Part 2-4: Electric transportation related domain | |
| Glass bulb designation system for lamps | |
| Graphical symbols for electrical equipment in medical practice | |
| Grid connection of offshore wind via VSC-HVDC systems | |
| Guidance and plan to develop smart energy ontologies | |
| Guidance for combining different single-mode fibres types | |
| Guidance for evaluating exposure from multiple electromagnetic sources | |
| Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products | |
| Guidance for residual stress measurement of optical fibre | |
| Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use | |
| Guidance for the interpretation of OTDR backscattering traces for single-mode fibres | |
| Guidance for the interpretation of OTDR backscattering traces | |
| Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm \x96 Test results of research on influencing parameters | |
| Guidance on colour coding of optical fibre cables | |
| Guidance on error and warning messages for software used in radiotherapy | |
| Guidance on fungus resistance of optical fibre cables | |
| Guidance on how to conduct round robin tests for household and similar electrical appliances | |
| Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems | |
| Guidance on the interpretation of carbon dioxide and 2-furfuraldehyde as markers of paper thermal degradation in insulating mineral oil | |
| Guide for the selection of drop cables | |
| Guideline for safe operation of medical equipment used for haemodialysis treatments | |
| Guidelines for combining different single-mode fibre sub-categories | |
| Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment | |
| Guidelines for the development and use of medical electrical equipment educational materials | |
| Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results | |
| Guidelines for the statistical analysis of ageing test data \x96 Part 3: Minimum specimen numbers at different test conditions with given experimental data | |
| Harmonization of environmental performance criteria for electrical and electronic products \x96 Feasibility study | |
| High frequency surgical equipment and high frequency surgical accessories \x96 Operation and maintenance | |
| High-voltage switchgear and controlgear - Part 302: Alternating current circuit-breakers with intentionally non-simultaneous pole operation | |
| High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1... | |
| High-voltage switchgear and controlgear \x96 Part 312: Guidance for the transferability of type tests of high-voltage/low-vol tage prefabricated substations | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 2: Environmental conditions | |
| Home laundry appliances - Uncertainty reporting of measurements | |
| Household and similar electrical appliances \x96 Method for measuring performance \x96 Assessment of repeatability, reproducibility and uncertainty | |
| Household electrical appliances - Guidelines for consumer panel testing | |
| Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 6: Listening tests on loudspeakers - Single stimulus ratings and paired comparisons | |
| Household microwave ovens - Visual clarity of see-through oven doors | |
| IEC Quality Assessment System for Electronic Components (IECQ) \x96 Electrical and Electronic Components and Products Harzardous Substance Process Management System Requirements (HSPM) | |
| Incompatibility of connectors for DC-application in photovoltaic systems | |
| Industrial communication networks - Fieldbus specifications | |
| Industrial communication networks \x96 Broadband fieldbus specification \x96 AUTBUS | |
| Industrial communication networks \x96 Network and system security \x96 Part 3-1: Security technologies for industrial automation and control systems | |
| Industrial networks \x96 Wireless communication network and communication profiles \x96 WIA-FA | |
| Industrial-process measurement and control \x96 Programmable controllers \x96 Part 8: Guidelines for the application and implementation of programming languages | |
| Industrial-process measurement, control and automation \x96 Framework for functional safety and security | |
| Industrial-process measurement, control and automation \x96 Smart manufacturing \x96 Part 1: Terms and definitions | |
| Industrial-process measurement, control and automation \x96 Smart Manufacturing \x96 Part 2: Use cases | |
| Industrial-process measurement, control and automation \x96 Smart Manufacturing \x96 Part 3: Challenges for cybersecurity | |
| Industrial-process measurement, control and automation \x96 Smart manufacturing \x96 Part 5: Market and innovation trends analysis | |
| Instrument transformers - The use of instrument transformers for power quality measurement | |
| Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper) | |
| Insulating liquids \x96 Quantitative determination of methanol and ethanol in insulating liquids | |
| Insulation co-ordination \x96 Part 4: Computational guide to insulation co-ordination and modelling of electrical networks | |
| Integrating distributed PV into LVDC systems and use cases | |
| Intelligent device management \x96 Part 1: Concepts and terminology | |
| Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL) | |
| Land usage of photovoltaic (PV) farms \x96 Mathematical models and calculation examples | |
| Lifecycle requirements for functional safety and security for IACS | |
| Lighting systems \x96 Characteristics for selected outdoor applications | |
| Lightning and surge voltage protection for photovoltaic (PV) power supply systems | |
| Live working \x96 Guidance for end users for the selection of personal protective equipment against the hazards of an electric arc | |
| Live working \x96 Guidelines for the installation of transmission and distribution line conductors and earth wires \x96 Stringing equipment and accessory items | |
| Live working \x96 Voltage detectors \x96 Part 6: Guidelines on non-contact voltage detectors (NCVD) for use at nominal voltages above 1 kV AC | |
| Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings | |
| Low-voltage switchgear and controlgear \x96 Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies | |
| Low-voltage switchgear and controlgear \x96 Fire risk analysis and risk reduction measures | |
| Low-voltage switchgear and controlgear \x96 Guidance for the development of embedded software | |
| Low-voltage switchgear and controlgear \x96 Part 7-5: Ancillary equipment \x96 Terminal blocks for aluminium conductors | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 0: Guidance to specifying assemblies | |
| LVDC systems \x96 Assessment of standard voltages and power quality requirements | |
| Maintenance of low voltage switchgear and controlgear and their assemblies | |
| Mapping between the clauses of the third edition of IEC 60601-1 and the 1988 edition as amended | |
| Maritime navigation and radiocommunication equipment and systems \x96 Bridge alert management \x96 Part 101: Guideline on implementation | |
| Maritime navigation and radiocommunication equipment and systems \x96 VHF data exchange system \x96 Requirements and methods of testing for stations including ASM functionality | |
| Material declaration for products of and for the electrotechnical industry \x96 Part 1: Guidance for the implementation of IEC 62474 | |
| Measurement methods \x96 High dynamic range video | |
| Measurement microphones - Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones | |
| Measurement of internal electric field in insulating materials \x96 Pressure wave propagation method | |
| Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz | |
| Measurement protocols for photovoltaic devices based on organic, dye-sensitized or perovskite materials | |
| Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software | |
| Medical device software - Part 3: Process reference model of medical device software life cycle processes | |
| Medical devices \x96 Part 2: Guidance on the application of usability engineering to medical devices | |
| Medical electrical equipment - Glossary of defined terms | |
| Medical electrical equipment \x96 Diagnostics X-rays \x96 Part 2: Guidance and rationale on quality equivalent filtration and permanent filtration | |
| Medical electrical equipment \x96 Part 4-1: Guidance and interpretation \x96 Medical electrical equipment and medical electrical systems employing a degree of autonomy | |
| Medical electrical equipment \x96 Part 4-2: Guidance and interpretation \x96 Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems | |
| Medical electrical equipment \x96 Part 4-3: Guidance and interpretation \x96 Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements | |
| Medical electrical equipment \x96 Part 4-5: Guidance and interpretation \x96 Safety-related technical security specifications | |
| Medical electrical system \x96 Guidelines for safe integration and operation of adaptive external-beam radiotherapy systems for real-time adaptive radiotherapy | |
| Metallic communication cable test methods - Part 4-0: Electromagnetic compatibility (EMC) - Relationship between surface transfer impedance and screening attenuation, recommended limits | |
| Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements | |
| Methods for calculating the main static performance indicators of transducers and transmitters | |
| Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 kHz to 30 MHz | |
| Microgrids \x96 Part 4: Use cases | |
| Mnemonics and designations of symbols for measuring relays, instruments and related device | |
| Mnemonics and symbols for integrated circuits | |
| Mobile and portable DVB-T/H radio access - Part 4: Measurement methods for total radiated sensitivity in hand-held broadcast terminals | |
| Model and framework for standardization in multimedia equipment and systems | |
| Models for evaluation of thermal hazard in medical diagnostic ultrasonic fields | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 1-5: Correction procedures for the measurement results of return loss and input impedance | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-6: Nominal DC-resistance values of floor-wiring and work-area cables for digital communications | |
| Multimedia home server systems - Implementation of digital rights permission code | |
| Multimedia systems and equipment - Multimedia e-publishing and e-book - Guideline for protection against mechanical stress during distribution of e-books in CD and DVD media | |
| Multimedia systems and equipment - Quality assessment - Audio-video communication systems | |
| Nanotechnologies \x96 A guideline for ellipsometry application to evaluate the thickness of nanoscale films | |
| Nuclear medicine instrumentation - Routine tests - Part 1: Gamma radiation counting systems | |
| Nuclear medicine instrumentation \x96 Routine tests \x96 Part 2: Scintillation cameras and single photon emission computed tomography imaging | |
| Nuclear medicine instrumentation \x96 Routine tests \x96 Part 3: Positron emission tomographs | |
| Nuclear medicine instrumentation \x96 Routine tests \x96 Part 4: Radionuclide calibrators | |
| On-line analyser systems - Guide to design and installation | |
| Optical amplifiers \x96 Part 12: Optical fibre amplifiers for space division multiplexing transmission | |
| Optical amplifiers \x96 Part 1: Parameters of optical fibre amplifier components | |
| Optical amplifiers \x96 Part 3: Classification, characteristics and applications | |
| Optical amplifiers \x96 Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers | |
| Optical amplifiers \x96 Part 6: Distributed Raman amplification | |
| Optical amplifiers \x96 Part 8: High-power amplifiers | |
| Optical amplifiers \x96 Part 9: Semiconductor optical amplifiers (SOAs) | |
| Optical fibre cables \x96 Guidelines to the installation of optical fibre cables | |
| Optical fibre cables \x96 Shrinkage effects on cable and cable element end termination \x96 Guidance | |
| Optical fibres - Guidance for nuclear radiation tests | |
| Optical fibres - Reliability - Power law theory | |
| Overhead electrical conductors \x96 Calculation methods for stranded bare conductors | |
| Overhead lines - Meteorological data for assessing climatic loads | |
| Photobiological safety of lamps and lamp systems \x96 Part 4: Measuring methods | |
| Photonic integrated circuits \x96 Part 1: Introduction and roadmap for standardization | |
| Photovoltaic devices \x96 Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices | |
| Photovoltaic devices \x96 Part 13: Electroluminescence of photovoltaic modules | |
| Photovoltaic devices \x96 Part 14: Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions | |
| Photovoltaic power systems (PVPSs) \x96 Roadmap for robust reliability | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets \x96 Conductive charging of electric vehicles \x96 Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler | |
| Position statement on germicidal UV-C irradiation \x96 UV-C safety guidelines | |
| Power quality management \x96 Part 100: Impact of power quality issues on electric equipment and power system | |
| Power supplying scheme for wearable system and equipment | |
| Power systems management and associated information exchange - Data and communications security - Part 10: Security architecture guidelines | |
| Power systems management and associated information exchange - Part 200: Guidelines for migration from internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6) | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 13: Guidelines on security topics to be covered in standards and specifications | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 90-1: Guidelines for handling role-based access control in power systems | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 90-2: Deep packet inspection of encrypted communications | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 90-3: Guidelines for network and system management | |
| Power systems management and associated information exchange \x96 Interoperability in the long term \x96 Part 103: Standard profiling | |
| Power systems management and associated information exchange \x96 Part 1: Reference architecture | |
| Power systems management and associated information exchange \x96 Part 2: Use Cases and role model | |
| Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of losses in power transformers and reactors | |
| Power transformers \x96 Part 20: Energy efficiency | |
| Power transformers \x96 Part 23: DC magnetic bias suppression devices | |
| Power transformers \x96 Part 26: Functional requirements of insulating liquids for use in power transformers | |
| Probablistic risk analysis of technological systems \x96 Estimation of final event rate at a given initial state | |
| Procedures for the assessment of human exposure to electromagnetic fields from radiative wireless power transfer systems \x96 Measurement and computational methods (frequency range of 30 MHz to 300 GHz) | |
| Process analysis technology systems as part of safety instrumented systems | |
| Professional tape-less camera recorder | |
| Programmable controllers - Part 4: User guidelines | |
| Programmable controllers \x96 Part 8: Guidelines for the application and implementation of programming languages | |
| PSR \x96 Specific rules for luminaires | |
| Quantification methodology for greenhouse gas emissions for computers and monitors | |
| Radio frequency beam wireless power transfer (WPT) for mobile devices | |
| Radio frequency connectors \x96 Part 1-51: Technical specification of electrical tests \x96 Uncertainty specification of frequency domain test for return loss | |
| Radio frequency identification (RFID) for stationary lead acid cells and monoblocs - Tentative requirements | |
| Railway applications \x96 Specification and demonstration of reliability, availability, maintainability and safety (RAMS) \x96 Part 4: RAM risk and RAM life cycle aspects | |
| Reference standards portfolio (RSP) on interoperability and connectivity for active assisted living (AAL) in the connected home environment (CHE) | |
| Reliability of industrial automation devices and systems \x96 Part 2: System reliability | |
| Renewable energy power forecasting technology | |
| Requirements for measurement standards for high intensity therapeutic ultrasound (HITU) devices | |
| Residual current devices (RCDs) associated with additional functions(s) | |
| Rotating electrical machinery \x96 Natural graphite brush for slip-ring in wound rotor-type induction motor \x96 Application information | |
| Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters | |
| Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electrical machines | |
| Rotating electrical machines \x96 Part 27-5: Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage | |
| Rotating electrical machines \x96 Part 30-2: Efficiency classes of variable speed AC motors (IE-code) | |
| Rotating electrical machines \x96 Part 31: Selection of energy-efficient motors including variable speed applications \x96 Application guidelines | |
| Rotating electrical machines \x96 Part 32: Measurement of stator end-winding vibration at form-wound windings | |
| Rotating electrical machines \x96 Part 34: AC adjustable speed rolling mill motors | |
| Safety aspects \x96 Guidelines for adult AAL care recipients in standards and other specifications | |
| Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1 | |
| Safety of laser products \x96 Part 14: A user's guide | |
| Safety of laser products \x96 Part 3: Guidance for laser displays and shows | |
| Safety of laser products \x96 Part 5: Manufacturer's checklist for IEC 60825-1 | |
| Safety of laser products \x96 Part 8: Guidelines for the safe use of laser beams on humans | |
| Safety of lasers products \x96 Part 5: Manufacturer\xb4s checklist for IEC 60825-1 | |
| Safety of machinery - Guidelines for the use of communication systems in safety-related applications | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 34: Requirements for machine tools | |
| Safety of machinery \x96 Part 2: Examples of application | |
| Safety of machinery \x96 Security aspects related to functional safety of safety-related control systems | |
| Safety procedures for reduction of risk outside a structure | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002 - Safety requirements for hand-held probe assemblies for electrical test... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Design and manufacturing recommendations for portable batteries made from sealed secondary cells | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles \x96 Part 4: Candidate alternative test methods for the internal short circuit test of IEC 62660-3 | |
| Security for industrial automation and control systems \x96 Part 2-3: Patch management in the IACS environment | |
| Selection guidelines for polymeric materials for outdoor use under HV stress | |
| Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics \x96 Guidance | |
| Semiconductor converters \x96 General requirements and line commutated converters \x96 Part 1-2: Application guidelines | |
| Sharp edge testing apparatus and test procedure for lighting equipment - Tests for sharpness of edge | |
| Short-circuit currents in three-phase AC systems \x96 Part 4: Examples for the calculation of short-circuit currents | |
| Smart cities \x96 City service continuity \x96 Implementation guideline and city service cases | |
| Smart Cities Reference Architecture Methodology (SCRAM) | |
| Smart city standards inventory and mapping \x96 Part 1: Methodology | |
| Smart city standards inventory and mapping \x96 Part 2: Standards inventory | |
| Smart city standards inventory and mapping \x96 Part 4: Guidance on standards for public health emergencies | |
| Smart city system \x96 Methodology for concepts building | |
| Smart city system ontology \x96 Part 1: Gap analysis | |
| Smart city use case collection and analysis \x96 City information modelling \x96 Part 1: High-level analysis | |
| Smart city use case collection and analysis \x96 City information modelling \x96 Part 2: Use case analysis | |
| Smart city use case collection and analysis \x96 Intelligent operations centre for smart cities \x96 Part 1: High-level analysis | |
| Smart city use case collection and analysis \x96 Managing public health emergencies in smart cities \x96 Part 1: High level analysis | |
| Smart city use case collection and analysis \x96 Smart urban planning for smart cities \x96 Part 1: High-level analysis | |
| Summary of requirements and tests to products in the scope of IEC 60601-2-66 | |
| Surge overvoltages and surge protection in low-voltage a.c. power systems - General basic information | |
| Switchgear and controlgear and their assemblies for low-voltage \x96 Energy efficiency | |
| Systems interface between customer energy management system and the power management system - Part 2: Use cases and requirements | |
| Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 companion standard | |
| Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User Guide | |
| Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles | |
| Test method development \x96 Guidelines for substance selection | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids \x96 Part 2: Test method for quantitative determination of total corrosive sulfur (TCS) | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids \x96 Part 3: Test method for quantitative determination of elemental sulfur | |
| Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) up to and including 500 kV (Um = 550 kV)... | |
| The universAAL framework for user interaction in multimedia AAL spaces | |
| UHV AC transmission systems \x96 Part 303: Guideline for the measurement of UHV AC transmission line power frequency parameters | |
| User\x92s Quality of Experience on Multimedia Conferencing Services \x96 Part 1: General | |
| Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements | |
| Validation of dynamic power control and exposure time-averaging algorithms \x96 Part 1: Cellular network implementations for SAR at frequencies up to 6 GHz | |
| Wind energy generation systems \x96 Part 11-2: Acoustic noise measurement techniques \x96 Measurement of wind turbine sound characteristics in receptor position | |
| Wind energy generation systems \x96 Part 12-4: Numerical site calibration for power performance testing of wind turbines | |
| Wind energy generation systems \x96 Part 21-3: Measurement and assessment of electrical characteristics \x96 Wind turbine harmonic model and its application | |
| Wind energy generation systems \x96 Part 21-4: Measurement and assessment of electrical characteristics \x96 Wind turbine components and subsystems | |
| Wind energy generation systems \x96 Part 25-71: Communications for monitoring and control of wind power plants \x96 Configuration description language | |
| Wind energy generation systems \x96 Part 26-4: Reliability for wind energy generation systems | |
| Wind turbine generator systems \x96 Part 13: Measurement of mechanical loads | |
| Wind turbine generator systems \x96 Part 23: Full-scale structural testing of rotor blades | |
| Wind turbines \x96 Part 14: Declaration of apparent sound power level and tonality values | |
| Wind turbines \x96 Part 26-1: Time-based availability for wind turbine generating systems | |
| Wind turbines \x96 Part 26-2: Production-based availability for wind turbines | |
| Zhaga interface specification Book 1 and Book 10 | |
| Zhaga interface specification Book 1 and Book 12 | |
| Zhaga interface specification Book 1 and Book 14 | |
| Zhaga interface specification Book 1 and Book 7 | |
| Zhaga Interface Specification Book 18 including Book 1 \x96 Outdoor Luminaire Extension Interface | |
| Zhaga Interface Specification Book 20 including Book 1 \x96 Smart interface between indoor luminaires and sensing/communicatio n modules |
| << Prev | Next >> |