Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
660
670
680
690
700
710
720
721
722
723
724
725
726
727
728
729
730
731
732
740
750
760
770
780
790
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Absorbent incontinence aids for urine and/or faeces \x96 Terminology and classification (ISO/DIS 22748:2020) | |
| Acoustics \x96 Characterization of sources of structure-borne sound and vibration \x96 Indirect measurement of blocked forces (ISO 20270:2019) | |
| Acoustics \x96 Hearing aid fitting management (HAFM) (ISO 21388:2020) | |
| Acoustics \x96 Hearing aid fitting management (HAFM) \x96 Part 1: General process (ISO/DIS 21388-1:2025) | |
| Acoustics \x96 Hearing Aid Fitting Management \x96 Part 2: Tele-services as part of hearing aid fitting management (tHAFM) (ISO/DIS 21388-2:2023) | |
| Adhesives \x96 Test method for adhesives for floor and wall coverings \x96 Peel test (ISO/DIS 22631:2018) | |
| Adhesives \x96 Test method for adhesives for floor and wall coverings \x96 Shear test (ISO/DIS 22632:2018) | |
| Adhesives \x96 Test method for adhesives for plastic or rubber floor coverings or wall coverings \x96 Determination of dimensional changes after accelerated ageing (ISO/DIS 22635:2018) | |
| Adhesives \x96 Test methods for adhesives for floor coverings and wall coverings \x96 Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO/DIS 22633:2018) | |
| Adhesives \x96 Test of adhesive for floor covering \x96 Determination of the electrical resistance of adhesive films and composites (ISO/DIS 22637:2018) | |
| Aerosol bacterial retention test method for air-inlet on administration devices (ISO/DIS 24072:2022) | |
| Anaesthetic and respiratory equipment \x96 Cuff pressure indication devices (ISO/DIS 23371:2019) | |
| Anaesthetic and respiratory equipment \x96 Low flow nasal cannulae for oxygen therapy (ISO/DIS 23368:2019) | |
| Anodizing of aluminium and its alloys \x96 Determination of mass per unit area (surface density) of anodic oxidation coatings \x96 Gravimetric method (ISO/DIS 2106:2019) | |
| Assistive products \x96 General requirements and test methods (ISO/DIS 21856:2020) | |
| Assistive products \x96 Guidelines on cognitive accessibility \x96 Daily time management (ISO 21802:2019) | |
| Assistive products for tissue integrity when lying down \x96 Part 1: General Requirements (ISO/DIS 20342-1:2018) | |
| Assistive products for tissue integrity when lying down \x96 Part 4: Test methods for durability (ISO/DIS 20342-4:2025) | |
| Assistive products for tissue integrity when lying down \x96 Part 5: Resistance to cleaning and disinfection (ISO/DIS 20342-5:2023) | |
| Basic semen examination \x96 Specification and test methods (ISO/DIS 23162:2020) | |
| Biogas \x96 Biogas production, conditioning, upgrading and utilization \x96 Terms, definitions and classification scheme (ISO 20675:2018) | |
| Biotechnology \x96 Biobanking \x96 General requirements for biobanking (ISO 20387:2018) | |
| Blast chillers and freezers cabinets for professional use \x96 Classification, requirements and test conditions (ISO/DIS 22042:2020) | |
| Building construction machinery and equipment \x96 Portable, hand-held, internal combustion engine driven abrasive cutting machines \x96 Part 2: Machines for abrasive chains \x96 Safety requirements (ISO/DIS 19432-2:2024) | |
| Building information modelling (BIM) \x96 Data templates for objects used in the life cycle of assets (ISO/DIS 23387:2024) | |
| Building information modelling and other digital processes used in construction \x96 Methodology to describe, author and maintain properties in interconnected dictionaries (ISO/DIS 23386:2019) | |
| Carbon based films \x96 Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry (ISO 23216:2021) | |
| Cathodic protection of offshore wind structures (ISO/DIS 24656:2020) | |
| Cereals, pulses and by-products \x96 Determination of ash yield by incineration (ISO/DIS 2171:2020) | |
| Cheese \x96 Guidance on sample preparation for physical and chemical testing (ISO/DIS 24223:2021) | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 1: General information and sample preparation (ISO/DIS 21068-1:2023) | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 2: Determination of volatile components, total carbon, free carbon, silicon carbide, total and free... | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO/DIS 21068-3:2023) | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 4: XRD methods (ISO/DIS 21068-4:2023) | |
| Chemicals for the leather tanning industry \x96 Determination of cyclosiloxanes in waterproofing fatliquors (ISO/DIS 23649:2024) | |
| Chemicals for the leather tanning industry \x96 Determination of the total content of certain bisphenols (ISO/DIS 21135:2023) | |
| Clinical laboratory testing and in vitro diagnostic test systems \x96 Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test \x96 Part 2: Evaluation of performance of... | |
| Cognitive accessibility \x96 Part 1: General guidelines (ISO 21801-1:2020) | |
| Cognitive accessibility \x96 Part 2: Reporting (ISO/DIS 21801-2:2021) | |
| Commercial beverage coolers \x96 Classification, requirements and test conditions (ISO/DIS 22044:2024) | |
| Conveyor belts \x96 Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO/DIS 22721:2022) | |
| Corrosion of metals and alloys \x96 Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019) | |
| Corrosion tests in artificial atmospheres \x96 Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO/DIS 21207:2024) | |
| Cosmetics \x96 Analytical methods \x96 Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO/DIS 23821:2021) | |
| Cosmetics \x96 Analytical methods \x96 Direct determination of traces of mercury in cosmetics by thermal decomposition \x96 Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021) | |
| Cosmetics \x96 Analytical methods \x96 Measurement of traces of heavy metals in cosmetic finished products using ICP/MS technique (ISO/DIS 21392:2020) | |
| Cosmetics \x96 Measurement of the sunscreen efficacy by diffuse reflectance spectroscopy (ISO/DIS 23698:2024) | |
| Cosmetics \x96 Microbiology \x96 Testing of impregnated or coated wipes and masks (ISO 21322:2020) | |
| Cosmetics \x96 Sun protection test Methods \x96 In Vitro determination of Sun Protection Factor (SPF) (ISO/DIS 23675:2023) | |
| Cosmetics \x96 Sun protection test methods \x96 In vivo determination of sunscreen UVA protection (ISO/DIS 24442:2021) | |
| Cosmetics \x96 Sun protection test methods \x96 In vivo determination of the sun protection factor (SPF) (ISO/DIS 24444:2019) | |
| Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2015) | |
| Cryogenic vessels \x96 Centrifugal pumps for cryogenic service (ISO/DIS 24490:2024) | |
| Cryogenic vessels \x96 Hoses (ISO/DIS 21012:2021) | |
| Cryogenic vessels \x96 Large transportable vacuum-insulated vessels \x96 Part 1: Design, fabrication, inspection and testing (ISO/DIS 20421-1:2025) | |
| Cryogenic vessels \x96 Static vacuum insulated vessels \x96 Part 2: Operational requirements (ISO/DIS 21009-2:2023) | |
| Cryogenic vessels \x96 Static vacuum-insulated vessels \x96 Part 1: Design, fabrication, inspection and tests (ISO/DIS 21009-1:2024) | |
| Cryogenic vessels \x96 Valves for cryogenic service (ISO/DIS 21011:2021) | |
| Dentistry \x96 Adaptability test between implant body and implant abutment in dental implant systems (ISO/DIS 22683:2021) | |
| Dentistry \x96 Chairside denture base relining materials \x96 Part 1: Hard type materials (ISO/DIS 23401-1:2022) | |
| Dentistry \x96 Classification of tooth restorations preparation (ISO/DIS 24395:2022) | |
| Dentistry \x96 Colour tabs for intraoral tooth colour determination (ISO/DIS 22598:2019) | |
| Dentistry \x96 Corrosion resistance of dental amalgam (ISO/DIS 23325:2019) | |
| Dentistry \x96 Designations for the parts and dimensions of an implant body or a monopart implant (ISO/DIS 24466:2022) | |
| Dentistry \x96 Digital impression devices \x96 Methods for assessing accuracy (ISO/DIS 20896:2018) | |
| Dentistry \x96 Elastomeric auxiliaries for use in orthodontics (ISO/DIS 21606:2021) | |
| Dentistry \x96 Hydrocolloid impression materials (ISO/DIS 21563:2020) | |
| Dentistry \x96 Intraoral camera (ISO/DIS 23450:2020) | |
| Dentistry \x96 Manual toothbrushes \x96 General requirements and test methods (ISO/DIS 20126:2021) | |
| Dentistry \x96 Materials for dental instruments \x96 Part 1: Stainless steel (ISO/DIS 21850-1:2019) | |
| Dentistry \x96 Materials for dental instruments \x96 Part 2: Polymers (ISO/DIS 21850-2:2024) | |
| Dentistry \x96 Metallic materials for fixed and removable restorations and appliances (ISO/DIS 22674:2021) | |
| Dentistry \x96 Multifunction handpieces (ISO/DIS 22569:2019) | |
| Dentistry \x96 Physical properties of powered toothbrushes (ISO/DIS 20127:2019) | |
| Dentistry \x96 Portable dental equipment for use in non-permanent healthcare environment \x96 Part 1: General requirements (ISO/DIS 23402-1:2025) | |
| Dentistry \x96 Pre-capsulated dental amalgam (ISO/DIS 20749:2022) | |
| Dentistry \x96 Sinus membrane elevator (ISO/DIS 19490:2024) | |
| Dentistry \x96 Spoons and bone curettes (ISO/DIS 22570:2019) | |
| Dentistry \x96 Terminology for forensic oro-dental data (ISO/DIS 20888:2019) | |
| Dentistry \x96 Test methods for machining accuracy of computer-aided milling machines (ISO/DIS 23298:2021) | |
| Dentistry \x96 Tissue punches (ISO/DIS 23445:2020) | |
| Dentistry \x96 Vocabulary (ISO/DIS 1942:2019) | |
| Determination of sunscreen UVA photoprotection in vitro (ISO/DIS 24443:2020) | |
| Determination of the resistance to cryogenic spill of insulation materials \x96 Part 2: Vapour release (ISO/DIS 20088-2:2019) | |
| Determination of the silanol group content on the surface of fumed silica \x96 Reaction gas chromatographic method (ISO 23157:2021) | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 1: Conceptual basis for measurements (ISO/DIS 20785-1:2019) | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 4: Validation of codes (ISO 20785-4:2019) | |
| Dosimetry with radiophotoluminescen t glass dosimeters for dosimetry audit in MV X-ray radiotherapy (ISO 22127:2019) | |
| E-liquid \x96 Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices \x96 Gas chromatographic method (ISO 20714:2019) | |
| Electronic fee collection \x96 Security framework (ISO/DIS 19299:2019) | |
| Ellipsometry \x96 Principles (ISO 23131:2021) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part -6: Container straddle carrier (ISO/DIS 23308-6:2024) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part 1: General (ISO/DIS 23308-1:2024) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks (ISO/DIS 23308-2:2024) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part 3: Container handling lift trucks (ISO/DIS 23308-3:2024) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part 4: Variable-reach rough-terrain trucks (ISO/DIS 23308-4:2025) | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 1: Safety and environmental requirements (ISO/DIS 19932-1:2022) | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 2: Test methods (ISO/DIS 19932-2:2022) | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 3: Inspection of knapsack sprayers in use (ISO/DIS 19932-3:2022) | |
| Ergonomics \x96 3-D scanning methodologies for internationally compatible anthropometric databases \x96 Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO/DIS 20685-2:2022) | |
| Ergonomics \x96 Accessible design \x96 Indicator lights on consumer products (ISO/DIS 24550:2019) | |
| Ergonomics \x96 Accessible design \x96 Spoken instructions of consumer products (ISO/DIS 24551:2019) | |
| External limb prostheses and external orthoses \x96 Requirements and test methods (ISO/DIS 22523:2022) | |
| Eye and face protection \x96 Guidance on selection, use and maintenance (ISO/DIS 19734:2020) | |
| Fibre ropes \x96 Determination of certain physical and mechanical properties (ISO/DIS 2307:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Ceramic composites \x96 Notations and symbols (ISO 19634:2017) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x96 Determination of tensile properties of tubes (ISO 20323:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at room temperature \x96 Determination of compressive properties (ISO/FDIS 20504:2022) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods for chemical analysis of high purity barium titanate powders (ISO 21813:2019) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods of test for ceramic coatings \x96 Determination of internal stress in ceramic coatings by application of the Stoney formula (ISO 19674:2017)... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods of test for reinforcements \x96 Determination of tensile properties of filaments at ambient temperature (ISO/DIS 19630:2025) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Reinforcement of ceramic composites \x96 Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Thermophysical properties of ceramic composites \x96 Determination of specific heat capacity (ISO/DIS 19628:2024) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Thermophysical properties of ceramic composites \x96 Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Weibull statistics for strength data (ISO 20501:2019) | |
| Flares for combustion of biogas (ISO 22580:2020) | |
| Flexible and rigid cellular polymeric materials \x96 Accelerated ageing tests (ISO/FDIS 2440:2019) | |
| Foodstuffs \x96 Molecular biomarker analysis \x96 Protein-based methods (ISO/DIS 21572:2019) | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components \x96 Part 4: Non-metallic perforation resistant inserts (ISO/DIS 22568-4:2021) | |
| Footwear \x96 Attachement strength of top pieces (ISO/DIS 24264:2019) | |
| Footwear \x96 Attachment strength of straps, trims and accessories (ISO/DIS 24263: 2019) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of certain organic solvents (ISO/DIS 20686:2023) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of Nitrosamies (ISO/DIS 19577:2019) | |
| Footwear \x96 Identification of defects during visual inspection \x96 Vocabulary(ISO/DIS 20537:2023) | |
| Footwear \x96 Test method for insoles and insocks \x96 Dimensional change after cycle of wetting and drying (ISO 20535:2019) | |
| Footwear \x96 Test methods for heels \x96 Heel pin holding strength (ISO/DIS 19957:2020) | |
| Footwear \x96 Test methods for uppers \x96 Fastness to rubbing using a rubber pad (ISO/DIS 24265:2019) | |
| Footwear \x96 Test methods for whole shoe \x96 Flexing durability (ISO/DIS 24266:2019) | |
| Footwear \x96 Vocabulary (ISO/DIS 19952:2024) | |
| Footwear and footwear components \x96 Qualitative test method to assess antifungal activity (growth test) (ISO/DIS 19574:2020) | |
| Footwear sizing \x96 Inshoe measurement \x96 Part 1: Shoe length (ISO/DIS 19410-1:2021) | |
| Forensic sciences \x96 Part 1: Terms and definitions (ISO/DIS 21043-1:2024) | |
| Forensic Sciences \x96 Part 3: Analysis (ISO/DIS 21043-3:2024) | |
| Forensic Sciences \x96 Part 5: Reporting (ISO/DIS 21043-5:2024) | |
| Forestry and gardening machinery \x96 Noise test code for portable hand-held machines with internal combustion engine \x96 Engineering method (Grade 2 accuracy) (ISO/DIS 22868:2018) | |
| Forestry and gardening machinery \x96 Vibration test code for portable hand-held machines with internal combustion engine \x96 Vibration at the handles (ISO/DIS 22867:2020) | |
| Foundry machinery \x96 Safety requirements for high pressure die casting machines (ISO/DIS 23063:2020) | |
| Foundry machinery \x96 Safety requirements for molding and coremaking machinery and associated equipment (ISO/DIS 23062:2019) | |
| Friction \x96 Test methods for casual footwear and components (ISO/DIS 24267:2019) | |
| Gas cylinders \x96 Ball valves \x96 Specification and testing (ISO/DIS 23826:2021) | |
| Gas cylinders \x96 Cylinder bundles \x96 Periodic inspection and testing (ISO 20475:2018) | |
| Gas cylinders \x96 Cylinder valves with integrated pressure regulators \x96 Specification and type testing (ISO/DIS 22435:2023) | |
| Gas cylinders \x96 Inspection and maintenance of valves (ISO/DIS 22434:2021) | |
| Gas turbine applications \x96 Safety (ISO/DIS 21789:2020) | |
| Gaseous hydrogen \x96 Cylinders and tubes for stationary storage (ISO/DIS 19884:2018) | |
| Geographic information \x96 Geospatial API for features \x96 Part 1: Core (ISO 19168-1:2020) | |
| Geographic information \x96 Geospatial API for features \x96 Part 2: Coordinate Reference Systems by Reference (ISO/DIS 19168-2:2021) | |
| Geographic information \x96 Geospatial API for tiles \x96 Part 1: Core (ISO/DIS 19177-1:2024) | |
| Geographic information \x96 Training data markup language for artificial intelligence \x96 Part 1: Conceptual model standard (ISO/DIS 19178-1:2024) | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 1: Plain limit gauges of linear size (ISO/DIS 1938-1:2025) | |
| Geometrical product specifications (GPS) \x96 Geometrical tolerancing \x96 General geometrical and dimensional specifications (ISO/DIS 22081:2019) | |
| Geometrical product specifications (GPS) \x96 Standard reference temperature for the specification of geometrical and dimensional properties (ISO/DIS 1:2021) | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 1: Indication of surface texture (ISO/DIS 21920-1:2020) | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 2: Terms, definitions and surface texture parameters (ISO/DIS 21920-2:2020) | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 3: Specification operators (ISO/DIS 21920-3:2020) | |
| Geotechnical investigation and testing \x96 field testing \x96 Part 14: Borehole dynamic probing (ISO/DIS 22476-14:2019) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 16: Borehole shear test (ISO/DIS 22476-16:2023) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 1: Electrical cone and piezocone penetration test (ISO/DIS 22476-1:2021) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 4: Prebored pressuremeter test by M\xe9nard procedure (ISO/DIS 22476-4:2020) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 5: Prebored pressuremeter test (ISO/DIS 22476-5:2022) | |
| Geotechnical investigation and testing \x96 Sampling of soil, rock and groundwater \x96 Part 1: Technical principles (ISO/DIS 22475-1:2018) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 2: Testing of piles: static tension load testing (ISO/DIS 22477-2:2022) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 5: Testing of grouted anchors (ISO/DIS 22477-5:2016) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 6: Load testing of soil nails and rock bolts (ISO/DIS 22477-6:2025) | |
| Ground investigation and testing \x96 Field testing \x96 Part 9: Field vane test (FVT and FVT-F) (ISO/DIS 22476-9:2019) | |
| Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO/DIS 21805:2021) | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume -- Part 2: Requirements for testing and marking of separation efficiency | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 1: General requirements (ISO/DIS 21904-1:2019) | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 4: Determination of the minimum air volume flow rate of capture... | |
| Health informatics -- Omics Markup Language (OML) | |
| Health informatics \x96 Identification of medicinal products \x96 Core vocabulary (terms and definitions) for the IDMP Standards (ISO/DIS 22532:2025) | |
| Health Informatics \x96 Interoperability and Integration Reference Architecture \x96 Model and Framework (ISO/DIS 23903:2020) | |
| Health informatics \x96 Patient healthcard data \x96 Part 5: Identification data (ISO/FDIS 21549-5:2023) | |
| Health informatics \x96 Patient healthcard data \x96 Part 7: Medication data (ISO/FDIS 21549-7:2023) | |
| Health Informatics \x96 Reference standards portfolio (RSP) \x96 Clinical imaging (ISO 21860:2020) | |
| Household biogas system requirements: design, installation, operation, maintenance and safety (ISO 23590:2020) | |
| Hydrogen generators using water electrolysis \x96 Part 1: General requirements, test protocols and safety requirements (ISO/DIS 22734-1:2024) | |
| Hydrogen technologies \x96 Methodology for determining the greenhouse gas emissions associated with the hydrogen supply chain \x96 Part 1: Emissions associated with the production of hydrogen to production gate (ISO/DIS... | |
| Ice-cream freezers \x96 Classification, requirements and test conditions (ISO/DIS 22043:2019) | |
| In vitro diagnostic medical devices \x96 Clinical performance studies using specimens from human subjects \x96 Good study practice (ISO 20916:2019) | |
| Industrial furnaces and associated processing equipment \x96 Safety requirements for steel converter and associated equipment (ISO/DIS 23495:2019) | |
| Industrial valves \x96 Gearbox for valves (ISO/DIS 22109:2025) | |
| Infant formula and adult nutritionals \x96 Determination of fructans \x96 High performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) after enzymatic treatment (ISO/DIS 22579:2019) | |
| Information container for data drop \x96 Exchange specification \x96 Part 1: Container (ISO/DIS 21597-1:2018) | |
| Information container for data drop \x96 Exchange specification \x96 Part 2: Dynamic semantics (ISO/DIS 21597-2:2018) | |
| Installation and equipment for liquefied natural gas \x96 Design of floating LNG installations \x96 Part 1: General requirements (ISO/DIS 20257-1:2018) | |
| Installation and equipment for liquefied natural gas \x96 Design of floating LNG installations \x96 Part 2: Specific FSRU issues (ISO/DIS 20257-2:2020) | |
| Intelligent transport systems \x96 Fast service announcement protocol (FSAP) for general purposes in ITS (ISO/DIS 22418:2019) | |
| Intelligent transport systems \x96 Geographic Data Files (GDF) GDF5.1 \x96 Part 1: Application independent map data shared between multiple sources (ISO 20524-1:2020) | |
| Intelligent transport systems \x96 Geographic Data Files (GDF) GDF5.1 \x96 Part 2: Map data used in automated driving systems, Cooperative ITS, and multi-modal transport (ISO 20524-2:2020) | |
| Intelligent transport systems \x96 ITS station security services for secure session establishment and authentication between trusted devices (ISO/FDIS 21177:2023) | |
| Kite boarding \x96 Release system \x96 Safety requirements and test methods (ISO/DIS 21853:2018) | |
| Lasers and laser-related equipment \x96 Test methods for laser-induced damage threshold \x96 Part 1: Definitions and general principles (ISO/DIS 21254-1:2024) | |
| Leather - Tests for colour fastness - Colour fastness to crocking (ISO/DIS 20433:2011) | |
| Leather \x96 Chemical tests \x96 Determination of pesticide residues content (ISO 22517:2019) | |
| Leather \x96 Chemical, physical, mechanical and fastness tests \x96 Position and preparation of specimens for testing (ISO/DIS 2418:2022) | |
| Leather \x96 Determination of degradability by micro-organisms (ISO/DIS 20136:2018) | |
| Leather \x96 Measurement of the colour and colour difference of finished leather (ISO/DIS 22700:2017) | |
| Leather \x96 Per- and polyfluoroalkyl substances \x96 Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography (ISO/DIS 23702-1:2021) | |
| Leather \x96 Physical and mechanical tests \x96 Determination of the static absorption of water (ISO/DIS 2417:2024) | |
| Leather \x96 Physical and mechanical tests \x96 Measurement of stitch tear resistance (ISO/DIS 23910:2018) | |
| Leather \x96 Physical and mechanical tests \x96 Specimen and test piece conditioning (ISO/DIS 2419:2023) | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to saliva (ISO/DIS 20701:2023) | |
| Library objects for architecture, engineering, construction, and use (ISO/DIS 22014:2023) | |
| Light conveyor belts \x96 Determination of electrical resistances (ISO/DIS 21178:2019) | |
| Light conveyor belts \x96 Determination of the coefficient of friction (ISO/DIS 21182:2024) | |
| Light conveyor belts \x96 Determination of the maximum tensile strength (ISO/DIS 21180:2024) | |
| Light conveyor belts \x96 Determination of the relaxed elastic modulus (ISO/DIS 21181:2024) | |
| Light conveyor belts \x96 Part 2: List of equivalent terms (ISO/DIS 21183-2:2018) | |
| Liquid petroleum products \x96 Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel \x96 Multidimensional gas chromatography method (ISO/DIS 22854:2020) | |
| Liquid pumps and pump units \x96 Noise test code \x96 Grades 2 and 3 of accuracy (ISO/DIS 20361:2018) | |
| Machine tools safety \x96 Turning machines \x96 Part 1: Safety requirements (ISO/DIS 23125-1:2023) | |
| Machinery for forestry \x96 Winches \x96 Dimensions, performance and safety \x96 Part 2: Traction aid winches (ISO/DIS 19472-2:2020) | |
| Measurement of fluid flow in closed conduits \x96 Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017) | |
| Measurement of radioactivity \x96 Alpha emitting radionuclides \x96 Generic test method using alpha spectrometry (ISO 23548:2024) | |
| Measurement of radioactivity \x96 Determination of beta emitters activities -Test method using liquid scintillation counting (ISO/DIS 19361:2024) | |
| Measurement of radioactivity \x96 Gamma emitting radionuclides \x96 Rapid screening method using scintillation detector gamma-ray spectrometry (ISO/DIS 19581:2024) | |
| Measurement of radioactivity \x96 Gamma-ray emitting radionuclides \x96 Generic test method using gamma-ray spectrometry (ISO 20042:2019) | |
| Medical devices \x96 Information to be supplied by the manufacturer (ISO/DIS 20417:2024) | |
| Medical devices utilizing animal tissues and their derivatives \x96 Part 1: Application of risk management (ISO/DIS 22442-1:2018) | |
| Medical devices utilizing animal tissues and their derivatives \x96 Part 2: Controls on sourcing, collection and handling (ISO/DIS 22442-2:2018) | |
| Medical laboratories \x96 Application of risk management to medical laboratories (ISO/DIS 22637:2025) | |
| Metallic and other inorganic coatings \x96 Surface treatment, metallic and other inorganic coatings \x96 Vocabulary (ISO/DIS 2080:2020) | |
| Metallic materials \x96 Uniaxial creep testing in tension \x96 Method of test (ISO/DIS 204:2022) | |
| Metallic tube connections for fluid power and general use \x96 Test methods for hydraulic fluid power connections (ISO/DIS 19879:2019) | |
| Microbiology of the food chain \x96 Determination and use of cardinal values (ISO/DIS 23691:2024) | |
| Microbiology of the food chain \x96 Methods for the detection of Anisakidae L3 larvae in fish and fishery products \x96 Part 1: UV-press method (ISO/DIS 23036-1:2019) | |
| Microbiology of the food chain \x96 Methods for the detection of Anisakidae L3 larvae in fish and fishery products \x96 Part 2: Artificial digestion method (ISO/DIS 23036-2:2019) | |
| Microbiology of the food chain \x96 Polymerase chain reaction (PCR) for the detection and quantification of microorganisms \x96 General requirements and definitions (ISO/DIS 22174:2022) | |
| Microbiology of the food chain \x96 Polymerase chain reaction (PCR) for the detection of food-borne pathogens \x96 Thermal performance testing of thermal cyclers (ISO/DIS 20836:2020) | |
| Microbiology of the food chain \x96 Requirements and guidelines for conducting challenge tests of food and feed products \x96 Part 2: Challenge tests to study inactivation potential and kinetic parameters... | |
| Microbiology of the food chain \x96 Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/DIS 22117:2018) | |
| Microbiology of the food chain \x96 Whole genome sequencing for typing and genomic characterization of foodborne bacteria \x96 General requirements and guidance (ISO/DIS 23418:2020) | |
| Microfluidic devices \x96 Interoperability requirements for dimensions, connections and initial device classification (ISO 22916:2022) | |
| Milk \x96 Quantitative determination of bacteriological quality \x96 Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO/DIS 21187:2019) | |
| Milk and milk products \x96 Determination of the sugar contents \x96 High performance anion exchange chromatographic method (HPAEC-PAD) (ISO/DIS 22184:2019) | |
| Mining \x96 Air quality control systems for operator enclosures \x96 Performance requirements and test methods (ISO 23875:2021) | |
| Mobile road construction machinery \x96 Safety \x96 Part 1: Common requirements (ISO/DIS 20500-1:2020) | |
| Mobile road construction machinery \x96 Safety \x96 Part 2: Specific requirements for road-milling machines (ISO/DIS 20500-2:2020) | |
| Mobile road construction machinery \x96 Safety \x96 Part 3: Specific requirements for soil-stabilising machines and recycling machines (ISO/DIS 20500-3:2020) | |
| Mobile road construction machinery \x96 Safety \x96 Part 4: Specific requirements for compaction machines (ISO/DIS 20500-4:2020) | |
| Mobile road construction machinery \x96 Safety \x96 Part 5: Mobile Specific requirements for paver-finishers (ISO/DIS 20500-5:2020) | |
| Mobile road construction machinery \x96 Safety \x96 Part 6: Specific requirements for mobile feeders (ISO/DIS 20500-6:2020) | |
| Mobile road construction machinery \x96 Safety \x96 Part 7: Specific requirements for slipform paver and texture curing machines (ISO/DIS 20500-7:2020) | |
| Molecular biomarker analysis \x96 Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains \x96 General requirements (ISO 22753:2021) | |
| Molecular biomarker analysis \x96 Methods of analysis for the detection and identification of animal species in foods and food products (nucleic acid-based methods) \x96 General requirements and definitions (ISO 20813:2019)... | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes in metabolomics in urine, venous blood serum and plasma (ISO/DIS 23118:2020) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for preexamination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 4: In situ detection techniques (ISO/DIS 20166-4:2020) | |
| Molecular in-vitro diagnostic examinations -- Specifications for pre-examination processes for venous whole blood -- Cellular RNA -- Part 3: Isolated circulating cell free DNA from plasma | |
| Monitoring for inadvertent movement and illicit trafficking of radioactive material (ISO 22188:2023) | |
| Nanotechnologies \x96 Analysis of nano-objects using asymmetrical flow and centrifugal field-flow fractionation (ISO/DIS 21362:2024) | |
| Needle-free injection systems for medical use \x96 Requirements and test methods (ISO/DIS 21649:2022) | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for hip-joint replacement implants (ISO/DIS 21535:2021) | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for knee-joint replacement implants (ISO/DIS 21536:2021) | |
| Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value (ISO/DIS 19232-1:2011) | |
| Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value (ISO/DIS 19232-2:2011) | |
| Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (ISO/DIS 19232-4:2011) | |
| Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type) - Determination of image unsharpness value (ISO/DIS 19232-5:2011) | |
| Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1 (ISO/DIS 2400:2011) | |
| Non-destructive testing \x96 Image quality of radiographs \x96 Part 3: Image quality classes (ISO/DIS 13232-3:2024) | |
| Non-destructive testing \x96 Leak testing \x96 Calibration of reference leaks for gases (ISO/DIS 20486:2016) | |
| Non-destructive testing \x96 Leak testing \x96 Tracer gas method (ISO/DIS 20485:2016) | |
| Non-destructive testing \x96 Terminology \x96 Terms used in ultrasonic testing with phased arrays | |
| Non-destructive testing of welds \x96 Phased Array technique (PA) \x96 Acceptance criteria (ISO/DIS 19285:2016) | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Testing of welds in austenitic steels and nickel-based alloys (ISO/DIS 22825:2016) | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021) | |
| Non-magnetic metallic coatings on metallic and non-metallic basis materials \x96 Measurement of coating thickness \x96 Phase-sensitive eddy-current method (ISO/DIS 21968:2018) | |
| Nuclear criticality safety \x96 Nuclear criticality safety training for operations (ISO 23133:2021) | |
| Nuclear fuel technology \x96 Sintered (U,Pu)O2 pellets \x96 Guidance for ceramographic preparation for microstructure examination (ISO/DIS 22765:2023) | |
| Oil and gas industries including lower carbon energy \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 5: External concrete coatings (ISO/DIS 21809-5:2025) | |
| Oil and gas industries including lower carbon energy \x96 Non-metallic materials in contact with media related to oil and gas production \x96 Part 4: Fiber-reinforced composite (ISO/DIS 23936-4:2023) | |
| Oil and gas industries including lower carbon energy \x96 Production assurance and reliability management (ISO/DIS 20815:2025) | |
| Oil and gas industries including lower carbon energy \x96 Specific requirements for offshore structures \x96 Part 7: Station-keeping systems for floating offshore structures and mobile offshore units (ISO/DIS 19901-7:2024) | |
| Open data communication in building automation, controls and building management -- Home and building electronic systems -- KNXnet/IP communication | |
| Ophthalmic instruments \x96 Corneal topographers (ISO/DIS 19980:2019) | |
| Optics and photonics \x96 Lasers and laser-related equipment \x96 Measurement of phase retardation of optical components for polarized laser radiation (ISO/DIS 24013:2022) | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 3: Operational phase of assets... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 4: Information exchange (ISO/DIS 19650-4:2021)... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 5: security-minded approach to information... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 6: Health and safety information... | |
| Packaging \x96 Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO/DIS 21898:2023) | |
| Paints and varnishes \x96 Cross-cut test (ISO/DIS 2409:2019) | |
| Paints and varnishes \x96 Determination of flow time by use of flow cups (ISO/DIS 2431:2018) | |
| Paints and varnishes \x96 Determination of pH value \x96 Part 1: pH electrodes with glass membrane (ISO/DIS 19396-1:2024) | |
| Paints and varnishes \x96 Determination of pH value \x96 Part 2: pH electrodes with ISFET technology (ISO/DIS 19396-2:2024) | |
| Paints and varnishes \x96 Determination of solvents in coating materials containing organic solvents only \x96 Gas-chromatographic method (ISO 23322:2021) | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 2: Single-impact test with a guided impact body (ISO/DIS 20567-2:2022) | |
| Paints and varnishes \x96 Determination of the film thickness of coatings using an ultrasonic gauge (ISO/DIS 19397:2023) | |
| Paints and varnishes \x96 Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO/DIS 20566:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 11: Bath stability (ISO 22553-11:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 12: Sedimentation on horizontal areas (ISO 22553-12:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 13: Determination of re-solving behaviour (ISO 22553-13:2021) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 14: Deposition behaviour (ISO 22553-14:2021) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 7: Electrical wet-film resistance (ISO 22553-7:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 8: Electric charge density (ISO 22553-8:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 9: Stoving loss (ISO 22553-9:2020) | |
| Paints and varnishes \x96 Wettability \x96 Part 1: Terminology and general principles (ISO/DIS 19403-1:2021) | |
| Personal protective equipment \x96 Occupational footwear (ISO/DIS 20347:2020) | |
| Personal protective equipment \x96 Protective footwear (ISO/DIS 20346:2020) | |
| Personal protective equipment \x96 Safety footwear (ISO/DIS 20345:2020) | |
| Personal protective equipment \x96 Test methods for footwear (ISO/DIS 20344:2020) | |
| Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO/DIS 20312:2010) | |
| Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 1: Jack-ups (ISO/DIS 19905-1:2009) | |
| Petroleum and natural gas industries \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 2: Single layer fusion-bonded epoxy coatings (ISO/DIS 21809-2:2020) | |
| Petroleum and natural gas industries \x96 Fixed steel offshore structures (ISO/DIS 19902:2018) | |
| Petroleum and natural gas industries \x96 Floating offshore structures \x96 Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (ISO/DIS 19904-1:2017) | |
| Petroleum and natural gas industries \x96 General requirements for offshore structures (ISO/DIS 19900:2018) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 10: Marine geophysical investigations (ISO 19901-10:2021) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 2: Seismic design procedures and criteria (ISO/DIS 19901-2:2020) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 3: Topsides structure (ISO/DIS 19901-3:2022) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 4: Geotechnical design considerations (ISO/DIS 19901-4:2022) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 5: Weight management (ISO/DIS 19901-5:2020) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 8: Marine soil investigations (ISO/DIS 19901-8:2021) | |
| Petroleum and natural gas industry \x96 Pipeline transportation systems \x96 Geological hazards risk management for onshore pipeline (ISO/DIS 20074:2018) | |
| Petroleum products -- Determination of cloud point -- Automatic step-wise cooling method | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Ultraviolet fluorescence method (ISO/DIS 20846:2018) | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Wavelength-dispersiv e X-ray fluorescence spectrometry (ISO/DIS 20884:2018) | |
| Petroleum products and related products \x96 Determination of kinematic viscosity \x96 Method by Stabinger type viscometer (ISO/DIS 23581:2023) | |
| Petroleum, petrochemical and natural gas industries \x96 Bulk material for offshore projects \x96 Pipe support (ISO/DIS 24200:2020) | |
| Petroleum, petrochemical and natural gas industries \x96 Non-metallic materials in contact with media related to oil and gas production \x96 Part 1: Thermoplastics (ISO/DIS 23936-1:2021) | |
| Petroleum, petrochemical and natural gas industries \x96 Prevention of corrosion on pipeline systems influenced by stray currents (ISO 21857:2021) | |
| Pigments and extenders \x96 Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics (ISO 21683:2019) | |
| Pigments and extenders \x96 Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods (ISO/DIS 20427:2025) | |
| Plastics \x96 Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions \x96 Test methods and requirements (ISO 22403:2020) | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 1: General principles (ISO 22526-1:2020) | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)... | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 3: Process carbon footprint, requirements and guidelines for quantification (ISO 22526-3:2020) | |
| Plastics \x96 Decorative solid surfacing materials \x96 Part 3: Determination of properties \x96 Solid surface shapes (ISO/FDIS 19712-3:2021) | |
| Plastics \x96 Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface \x96 Method by analysis of evolved carbon dioxide (ISO/DIS 19679: 2019) | |
| Plastics \x96 Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment \x96 Method by analysis of evolved carbon dioxide (ISO 22404:2019) | |
| Plastics \x96 Determination of the aerobic biodegradation of plastic materials exposed to seawater \x96 Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020) | |
| Plastics \x96 Determination of the aerobic biodegradation of plastic materials exposed to seawater \x96 Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020) | |
| Plastics \x96 Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions (ISO 22766:2020) | |
| Plastics \x96 Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test (ISO/DIS 20200:2022) | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021) | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 4: Light flash method (ISO/DIS 22007-4:2023) | |
| Plastics \x96 Homopolymer and copolymer resins of vinyl chloride \x96 Part 1: Designation system and basis for specifications (ISO/DIS 24024-1:2019) | |
| Plastics \x96 Homopolymer and copolymer resins of vinyl chloride \x96 Part 2: Preparation of test samples and determination of properties (ISO/DIS 24024-2:2019) | |
| Plastics \x96 Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 24023-1:2019) | |
| Plastics \x96 Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 24023-2:2019) | |
| Plastics \x96 Poly(methyl methacrylate) (PMMA) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 24026-1:2019) | |
| Plastics \x96 Poly(methyl methacrylate) (PMMA) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 24026-2:2019) | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 21302-1:2018) | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21302-2:2018) | |
| Plastics \x96 Polyetheretherketone (PEEK) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 23153-1:2019) | |
| Plastics \x96 Polyetheretherketone (PEEK) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 23153-2:2019) | |
| Plastics \x96 Polyketone (PK) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/FDIS 21970-1:2019) | |
| Plastics \x96 Polyketone (PK) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 21970-2:2019) | |
| Plastics \x96 Polystyrene (PS) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 24022-1:2019) | |
| Plastics \x96 Polystyrene (PS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 24022-2:2019) | |
| Plastics \x96 Sulfone polymer moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 24025-1:2019) | |
| Plastics \x96 Sulfone polymer moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 24025-2:2019) | |
| Plastics \x96 Test specimens (ISO/DIS 20753:2022) | |
| Plastics \x96 Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21304-2:2019) | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO/DIS 21306-1:2018) | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21306-2:2018) | |
| Plastics and rubber machines \x96 Clamping systems \x96 Part 1: Safety requirements for magnetic clamping systems (ISO/DIS 23582-1:2022) | |
| Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage \x96 Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO/DIS 23856:2019) | |
| Plastics piping systems for the trenchless replacement of underground pipeline networks \x96 Part 1: Replacement on the line by pipe bursting and pipe extraction | |
| Preparation and quality management of fluids for haemodialysis and related therapies \x96 Part 1: General requirements (ISO/DIS 23500-1:2022) | |
| Preparation and quality management of fluids for haemodialysis and related therapies \x96 Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO/DIS 23500-2:2022) | |
| Preparation and quality management of fluids for haemodialysis and related therapies \x96 Part 3: Water for haemodialysis and related therapies (ISO/DIS 23500-3:2022) | |
| Preparation and quality management of fluids for haemodialysis and related therapies \x96 Part 4: Concentrates for haemodialysis and related therapies (ISO/DIS 23500-4:2022) | |
| Preparation and quality management of fluids for haemodialysis and related therapies \x96 Part 5: Quality of dialysis fluid for haemodialysis and related therapies (ISO/DIS 23500-5:2022) | |
| Principles for the analysis of plastics and microplastics present in the environment (ISO/DIS 24187:2021) | |
| Proposal for English title: Refractory test piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns | |
| Prosthetics \x96 Testing of ankle-foot devices and foot units \x96 Requirements and test methods (ISO/DIS 22675:2021) | |
| Protective clothing \x96 Protection against rain (ISO/DIS 24232:2023) | |
| Protective clothing \x96 Protection against rain \x96 Test method for ready-made garments against high energy droplets from above (ISO/DIS 24231:2023) | |
| Protective clothing for use in Snowboarding \x96 Wrist Protectors \x96 Requirements and test methods (ISO/DIS 20320:2018) | |
| Public transport \x96 Interoperable fare management system \x96 Part 1: Architecture (ISO/DIS 24014-1:2020) | |
| Quality management systems \x96 Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear... | |
| Radiation protection \x96 Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO/DIS 20553:2023) | |
| Radiation protection \x96 Performance criteria for laboratories performing initial cytogenetic dose assessment of mass casualties in radiological or nuclear emergencies \x96 General principles and application to dicentric assay (ISO 21243:2022)... | |
| Radiological protection \x96 Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020) | |
| Radiological protection \x96 Performance criteria for service laboratories performing biological dosimetry by cytogenetics \x96 The dicentric assay (ISO/DIS 19238:2022) | |
| Railway applications \x96 Heating, ventilation and air conditioning systems for rolling stock \x96 Part 4: Basic design parameters, test and inspection items for the HVAC unit (ISO/DIS 19659-4:2024) | |
| Recreational diving services \x96 Requirements and guidance on sustainable practices in recreational diving | |
| Recreational diving services \x96 Requirements for rebreather diver training \x96 Decompression diving to 45 m (ISO/DIS 24642:2021) | |
| Recreational diving services \x96 Requirements for rebreather diver training \x96 No-decompression diving (ISO/DIS 24063:2021) | |
| Recreational diving services \x96 Requirements for training on environmental awareness for recreational divers | |
| Refrigerated display cabinets \x96 Part 1: Vocabulary (ISO/DIS 23953-1:2021) | |
| Refrigerated display cabinets \x96 Part 2: Classification, requirements and test conditions (ISO/DIS 23953-2:2021) | |
| Refrigerated food lockers \x96 Thermal and energy performance, ratings, environmental test conditions and associated testing methods (ISO/DIS 19424:2025) | |
| Refrigerated storage cabinets and counters for professional use \x96 Performance and energy consumption (ISO/DIS 22041:2018) | |
| Refrigerating systems and heat pumps \x96 Competence of personnel | |
| Refrigerating systems and heat pumps \x96 Pressure relief devices and their associated piping \x96 Methods for calculation (ISO/DIS 24664:2021) | |
| Remediation techniques applied at contaminated sites (ISO/DIS 24212:2023) | |
| Requirements for sleeping bags \x96 Part 1: Thermal, mass and dimensional requirements for sleeping bags designed for limit temperatures of -20\xb0C and higher (ISO/DIS 23537-1:2021) | |
| Requirements for sleeping bags \x96 Part 2: Fabric and material properties (ISO/DIS 23537-2:2022) | |
| Resilient and textile floor-covering \x96 Determination of side length, edge straightness and squareness of tiles and planks (ISO/DIS 24342:2023) | |
| Resilient floor coverings \x96 Determination of dimensional stability and curling after exposure to heat (ISO/DIS 23999:2021) | |
| Respiratory therapy equipment: Air entrainment devices (ISO/DIS 23372:2019) | |
| Road vehicles \x96 Dimethyl Ether (DME) refuelling connector (ISO 21058:2019) | |
| Rubber hoses, textile-reinforced, for compressed air \x96 Specification (ISO/DIS 2398:2023) | |
| Rubber or plastic coated fabrics \x96 Physical and mechanical test \x96 Determination of bending force (ISO/DIS 22751:2019) | |
| Rubber- or plastics-coated fabrics \x96 Determination of coating adhesion (ISO/DIS 2411:2023) | |
| Safety and control devices for oil burners and oil-burning appliances \x96 Particular requirements \x96 Part 1: Automatic and semi-automatic valves (ISO/DIS 23553-1:2020) | |
| Safety of machine tools - Turning machines (ISO/DIS 23125:2007) | |
| Safety of machinery \x96 Instruction handbook \x96 General drafting principles (ISO/DIS 20607:2025) | |
| Safety of machinery \x96 Mechanical safety data for physical contacts between moving machinery and persons (ISO/DIS 21260:2018) | |
| Science criminalistique \x96 Part 4: Interpretation (ISO/DIS 21043-4:2024) | |
| Security and resilience \x96 Business continuity management systems \x96 Guidance (ISO/DIS 22313:2019) | |
| Security and resilience \x96 Business continuity management systems \x96 Requirements (ISO/DIS 22301:2019) | |
| Security and resilience \x96 Community resilience \x96 Guidelines for planning the involvement of spontaneous volunteers (ISO 22319:2017) | |
| Security and resilience \x96 Crisis management \x96 Concept, principles and framework (ISO/DTS 22360:2023) | |
| Security and resilience \x96 Crisis management \x96 Guidelines for a strategic capability (ISO/DIS 22361:2021) | |
| Security and resilience \x96 Vocabulary (ISO/DIS 22300:2020) | |
| Ship and marine technology \x96 Technical requirements for liquefied natural gas bunkering dry-disconnect/conne ct coupling (ISO/DIS 21593:2018) | |
| Ships and marine technology \x96 Specification for bunkering of liquefied natural gas fuelled vessels (ISO/DIS 20519:2020) | |
| Shot blasting machinery \x96 Safety and environmental requirements (ISO/DIS 23779:2022) | |
| Simultaneous interpreting \x96 Equipment \x96 Requirements (ISO/DIS 20109:2023) | |
| Simultaneous interpreting delivery platforms \x96 Requirements and recommendations (ISO/DIS 24019:2021) | |
| Sludge recovery, recycling, treatment and disposal \x96 Requirements and recommendations for the operation of anaerobic digestion facilities (ISO 19388:2023) | |
| Small craft \x96 Lithium-ion batteries (ISO/DIS 23625:2024) | |
| Small craft \x96 Permanently installed petrol and diesel fuel tanks (ISO/DIS 21487:2021) | |
| Small craft \x96 Steering wheels (ISO/DIS 23411:2019) | |
| Soil quality \x96 In situ caging of snails to assess bioaccumulation of contaminants (ISO/DIS 24032:2020) | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials \x96 Part 1: Batch test using a liquid to solid ratio of 2 l/kg... | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials \x96 Part 2: Batch test using a liquid to solid ratio of 10 l/kg... | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials \x96 Part 3: Up-flow percolation test (ISO/DIS 21268-3:2018) | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials \x96 Part 4: Influence of pH on leaching with initial acid/base addition (ISO/DIS 21268-4:2018)... | |
| Soil quality \x96 Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach) (ISO 19204:2017) | |
| Soil quality \x96 Sampling of soil invertebrates \x96 Part 1: Hand-sorting and extraction of earthworms (ISO/DIS 23611-1:2025) | |
| Soil quality \x96 Sampling of soil invertebrates \x96 Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO/DIS 23611-2:2023) | |
| Soil quality \x96 Sampling of soil invertebrates \x96 Part 3: Sampling and extraction of enchytraeids (ISO/DIS 23611-3:2018) | |
| Soil quality \x96 Sampling of soil invertebrates \x96 Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO/DIS 23611-4:2021) | |
| Soil quality \x96 Sampling of soil invertebrates \x96 Part 5: Sampling and extraction of soil macro-invertebrates (ISO/DIS 23611-5:2023) | |
| Soil quality \x96 Test for measuring the inhibition of reproduction in oribatid mites (Oppia nitens) exposed to contaminants in soil (ISO 23266:2020) | |
| Soil, treated biowaste and sludge \x96 Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO/DIS 22036:2022) | |
| Solar energy \x96 Collector fields \x96 Check of performance (ISO/DIS 24194:2025) | |
| Solid biofuels \x96 Determination of ash melting behaviour (ISO/DIS 21404:2019) | |
| Solid biofuels \x96 Determination of content of heavy extraneous materials larger than 3,15 mm (ISO/DIS 19743:2025) | |
| Solid biofuels \x96 Determination of self-heating of pelletized biofuels \x96 Part 1: Isothermal calorimetry (ISO/DIS 20049-1:2019) | |
| Solid biofuels \x96 Determination of water sorption and its effect on durability of thermally treated biomass fuels \x96 Part 1: Pellets (ISO/DIS 23343-1:2020) | |
| Solid biofuels \x96 Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO/DIS 20024:2019) | |
| Solid biofuels \x96 Simplified sampling method for small scale applications (ISO/DIS 21945:2018) | |
| Solid recovered fuels \x96 Determination of ash content (ISO/DIS 21656:2019) | |
| Solid recovered fuels \x96 Determination of calorific value (ISO/DIS 21654:2019) | |
| Solid recovered fuels \x96 Determination of elemental composition by X-ray fluorescence (ISO/DIS 22940:2020) | |
| Solid recovered fuels \x96 Determination of moisture content using the oven dry method \x96 Part 2: Determination of total moisture by a simplified method (ISO/DIS 21660-2:2024) | |
| Solid recovered fuels \x96 Determination of moisture content using the oven dry method \x96 Part 3: Moisture in general analysis sample (ISO/DIS 21660-3:2019) | |
| Solid recovered fuels \x96 Determination of the content of volatile matter (ISO/DIS 22167:2019) | |
| Solid recovered fuels \x96 Methods for the determination of biomass content (ISO/DIS 21644:2019) | |
| Solid recovered fuels \x96 Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO/DIS 21663:2019) | |
| Solid recovered fuels \x96 Safe handling and storage of solid recovered fuels (ISO/DIS 21912:2020) | |
| Solid recovered fuels \x96 Sample preparation (ISO/DIS 21646:2020) | |
| Solid recovered fuels \x96 Specifications and classes (ISO/DIS 21640:2020) | |
| Solid recovered fuels \x96 Terminology, definitions and descriptions (ISO/DIS 21637:2019) | |
| Specification of liquefied natural gas as a fuel for marine applications (ISO/DIS 23306:2019) | |
| Sports and recreational facilities \x96 Trampoline parks \x96 Safety requirements (ISO/DIS 23659:2021) | |
| Stationary source emissions-- Determination of the mass concentration of ammonia -- Manual method | |
| Stationary training equipment - Part 1: General safety requirements and test methods (ISO/DIS 20957-1:2012) | |
| Stationary training equipment \x96 Part 2: Strength training equipment, additional specific safety requirements and test methods | |
| Stationary training equipment \x96 Part 7: Rowing machines, additional specific safety requirements and test methods | |
| Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices \x96 Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents... | |
| Sustainability in buildings and civil engineering works \x96 Data templates for the use of EPDs for construction products in BIM (ISO/DIS 22057:2021) | |
| Technical product documentation (TPD) \x96 Classification of requirements \x96 Part 1: Framework (ISO/DIS 24096-1:2023) | |
| Technical product documentation (TPD) \x96 Classification of requirements \x96 Part 2: Classification based on severity and susceptibility (ISO/DIS 24096-2:2023) | |
| Textile fibres \x96 Determination of linear density \x96 Gravimetric method and vibroscope method (ISO/DIS 1973:2020) | |
| Textile glass \x96 Yarns \x96 Designation (ISO/DIS 2078:2021) | |
| Textiles \x96 Determination of antibacterial activity of textile products (ISO/DIS 20743:2020) | |
| Textiles \x96 Determination of fabric deformability by forced mechanical distension (ISO/DIS 21765:2020) | |
| Textiles \x96 Determination of SCCP and MCCP in textile products out of different matrices by use of GC-NCI-MS (ISO/DIS 22818:2020) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests (ISO 20932-1:2018) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 2: Multiaxial tests (ISO 20932-2:2018) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 3: Narrow fabrics (ISO 20932-3:2018) | |
| Textiles \x96 Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery \x96 Part 1: Method of the horizontally folded specimen (ISO/DIS... | |
| Textiles \x96 Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery \x96 Part 2: Method of the vertically folded specimen (ISO/DIS... | |
| Textiles \x96 Determination of total halogens from textile products \x96 Method using combustion and ion chromatography (C-IC) (ISO/DIS 20999:2025) | |
| Textiles \x96 Man-made fibres \x96 Generic names (ISO/DIS 2076:2021) | |
| Textiles \x96 Method for determination of alkylphenols (AP) (ISO/DIS 21084:2018) | |
| Textiles \x96 Qantitative microscopical analysis \x96 General principles of testing (ISO/DIS 20705:2018) | |
| Textiles \x96 Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends \x96 Part 1: Fibre identification using microscopy methods (ISO/DIS 20706-1:2018) | |
| Textiles \x96 Qualitative and quantitative proteomic analysis of some animal hair fibers \x96 Part 3: Peptide detection using LC-MS without protein reduction (ISO/DIS 20418-3:2019) | |
| Textiles \x96 Smart textiles \x96 Test method for sheet resistance of conductive textiles using non-contact type (ISO/DIS 24584:2021) | |
| Textiles and textile product \x96 Critical substances potentially present in components of textile product materials \x96 Determination of organotin compounds \x96 Part 1: Method using gas chromatography (ISO/DIS 22744-1:2018) | |
| Textiles and textile products \x96 Determination of organotin compounds \x96 Part 2: Direct method using liquid chromatography (ISO/DIS 22744-2:2019) | |
| Thermal insulation for buildings \x96 Reflective insulation products \x96 Determination of thermal performance (ISO/DIS 22097:2019) | |
| Transfer sets for pharmaceutical preparations \x96 Requirements and test methods (ISO/DIS 22413:2020) | |
| Vapour products \x96 Determination of e-liquid vaporised mass and aerosol collected mass (ISO/DIS 24197:2022) | |
| Vapour products \x96 Determination of nicotine in vapour product emissions \x96 Gas chromatographic method (ISO/DIS 24199:2021) | |
| Vapour products \x96 Determination of selected carbonyls in vapour product emissions (ISO/DIS 24211:2021) | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions (ISO 20768:2018) | |
| Vegetable oils \x96 Determination of mineral oil saturated hydrocarbons (MOSH) and aromatic hydrocarbons (MOAH) with online coupled HPLC-GC-FID analysis \x96 Method for low limit of quantification (ISO/DIS 20122:2023) | |
| Water quality \x96 Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water \x96 Method using high performance... | |
| Water quality \x96 Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2018)... | |
| Water quality \x96 Guidance for rapid radioactivity measurements in nuclear or radiological emergency situation (ISO/DIS 22017:2019) | |
| Water quality \x96 Iron-55 \x96 Test method using liquid scintillation counting (ISO/DIS 22515:2019) | |
| Water quality \x96 Multi-compound class methods \x96 Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO/DIS 21253-1:2018) | |
| Water quality \x96 Multi-compound class methods \x96 Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO/DIS 21253-2:2018) | |
| Water quality \x96 Radium 226 and radium 228 \x96 Test method using liquid scintillation counting (ISO/DIS 22908:2018) | |
| Water quality \x96 Technetium-99 \x96 Part 1: Test method using liquid scintillation counting (ISO/DIS 22125-1:2018) | |
| Water quality \x96 Technetium-99 \x96 Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/DIS 22125-2:2018) | |
| Welding consumables \x96 Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys \x96 Classification (ISO/DIS 24034:2019) | |
| Welding consumables \x96 Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels \x96 Classification (ISO/DIS 24598:2018) | |
| Welding consumables \x96 Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels \x96 Classification (ISO/DIS 21952:2024) | |
| Workplace air \x96 Chemical agent present as a mixture of airborne particles and vapours \x96 Requirements for evaluation of measuring procedures using samplers (ISO/DIS 23861:2021) | |
| Workplace air \x96 Gases and vapours \x96 Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021) | |
| Workplace air \x96 Procedures for measuring gases and vapours using pumped samplers \x96 Requirements and test methods (ISO/DIS 22065:2018) |
| << Prev | Next >> |