Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
210
220
230
240
250
260
268
269
270
271
272
273
274
275
276
277
278
279
280
290
300
310
320
330
340
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| 18 Headed Clevis Pins (Metric Series) | |
| Abbreviations and Initials Used in Telecommunications - Series B: Means of Expression: Definitions, Symbols, Classification | |
| Abbreviations and Initials Used in Telecommunications | |
| Addenda to ASME B18.2.1-1996 Square and Hex Bolts and Screws (Inch Series) | |
| ADDENDA TO ASME B20.1- 1984 SAFETY STANDARD FOR CONVEYORS AND RELATED EQUIPMENT | |
| ADDENDA TO ASME B20.1- 1986 SAFETY STANDARD FOR CONVEYORS AND RELATED EQUIPMENT | |
| ADDENDA TO B19.1-1985 SAFETY STANDARD FOR AIR COMPRESSOR SYSTEMS | |
| ADDENDA TO B19.3-1986 SAFETY STANDARD FOR COMPRESSORS FOR PROCESS INDUSTRIES | |
| ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, SHAPES, AND TUBES | |
| ALUMINUM-ALLOY SEAMLESS PIPE/SEAMLESS EXTRUD TUBE | |
| Base Metal Grouping for Welding Procedure and Performance Qualification | |
| Bent Bolts (Inch Series) | |
| Beveled Washers | |
| Buttress Screw Threads | |
| Clearance Holes for Bolts, Screws, and Studs | |
| Clevis Pins and Cotter Pins (Inch Series) | |
| CLEVIS PINS AND COTTER PINS (PARTIAL REVISION AND REDESIGNATION OF ANSI B5.20-1958) | |
| Code d\x92installation des syst\xe8mes de chauffage hydronique | |
| Coextruded ABS/PVC Drain, Waste, and Vent Pipe | |
| Continuous and Double-End Studs (Inch Series) | |
| Cotter Pins, Headless Clevis Pins, and Headed Clevis Pins (Metric Series) | |
| COTTER PINS, METRIC SERIES | |
| Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | |
| Dog Points for Metric Bolts | |
| Double Coil Helical Spring Lock Washers for Wood Structures | |
| Energy Efficiency of Oil-Fired Storage Tank Water Heaters | |
| Energy Utilization Efficiencies of Oil-Fired Furnaces and Boilers | |
| Engineered Wood In School Design: The Smart Choice | |
| Erratum to ASME B18.2.1-1996 Square and Hex Bolts and Screws (Inch Series) | |
| Fasteners for Use in Structural Applications | |
| FERROUS PISTON RINGS (200 TO 1000MM DIAMETER) | |
| General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | |
| Groove and Shoulder Type Mechanical Pipe Couplings | |
| Groove- and shoulder-type mechanical pipe couplings | |
| Grooved Pins (Metric Series) | |
| Guide for Quality Control Charts Control Chart Method of Analyzing Data Control Chart Method of Controlling Quality During Production | |
| Headless Clevis Pins (Metric Series) | |
| Helical Coil Screw Thread Inserts - Free Running and Screw Locking (Inch Series) | |
| Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series) | |
| HEXAGON SOCKET BUTTON HEAD CAP SCREWS METRIC SERIES GOVERNMENT KEY WORDS: SCREW, CAP, HEXAGON SOCKET BUTTON HEAD - METRIC | |
| HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS (METRIC SERIES) GOVERNMENT KEY WORDS: SCREW, CAP, HEXAGON SOCKET, FLAT COUNTERSUNK HEAD - METRIC | |
| HEXAGON SOCKET HEAD SHOULDER SCREWS METRIC SERIES GOVERNMENT KEY WORDS: SCREW, SHOULDER, HEXAGON SOCKET HEAD- METRIC | |
| High-Strength High-Temperature Internal Wrenching Bolts | |
| Inspection and Quality Assurance for General Purpose Fasteners | |
| INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE METRIC FASTENERS | |
| INSPECTION AND QUALITY ASSURANCE FOR HIGH- VOLUME MACHINE ASSEMBLY METRIC FASTENERS | |
| Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners | |
| INSPECTION AND QUALITY ASSURANCE FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS - METRIC FASTENERS | |
| INSPECTION AND QUALITY ASSURANCE FOR SPECIAL PURPOSE METRIC FASTENERS | |
| Inspection and Quality Assurance Plan Requiring In-Process Inspection and Controls | |
| Installation Code for Hydronic Heating Systems | |
| LETTER SYMBOLS FOR TELECOMMUNICATIONS | |
| LOCK WASHERS (METRIC SERIES) | |
| LOCK WASHERS (REVISION AND REDESIGNATION OF B27.1-1965) (R 1983) | |
| Machine Dowel Pins - Hardened Ground (Metric Series) | |
| Machine Screws and Machine Screw Nuts | |
| Measurement Uncertainty for 60 Deg. Screw Thread Gage Element Measurement (Inch and Metric) | |
| Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | |
| Method of Alternate Immersion Corrosion Testing of Non-Ferrous Metals | |
| Method of Equivalent Yield Stress of Thermostat Metals | |
| Method of Total Immersion Corrosion Test of Non-Ferrous Metals | |
| Metric 12-Point Flange Screws | |
| Metric 12-Spline Flange Screws | |
| Metric Continuous and Double End Studs | |
| Metric Fasteners for Use in Structural Applications | |
| Metric Formed Hex Screws | |
| Metric General Purpose Semi-Tubular Rivets | |
| Metric Heavy Hex Bolts | |
| Metric Heavy Hex Flange Screws | |
| Metric Heavy Hex Nuts | |
| Metric Heavy Hex Screws | |
| Metric Heavy Hex Structural Bolts | |
| Metric Hex Bolts | |
| Metric Hex Cap Screws | |
| Metric Hex Flange Nuts | |
| Metric Hex Flange Screws | |
| Metric Hex Jam Nuts | |
| Metric Hex Lag Screws | |
| Metric Hex Nuts, Style 1 | |
| Metric Hex Nuts, Style 2 | |
| Metric Lifting Eyes | |
| Metric Machine Screws | |
| Metric Plain Washers | |
| Metric Round Head Short Square Neck Bolts | |
| Metric Round Head Square Neck Bolts | |
| Metric Series Hexagon Keys and Bits | |
| METRIC SERIES HEXAGON SOCKET SET SCREWS; GOVERNMENT KEY WORDS; SETSCREW, HEXAGON SOCKET - METRIC ERRATA-MAY 1980 | |
| Metric Slotted Hex Nuts | |
| Metric Thread-Forming and Thread-Cutting Tapping Screws | |
| Nylon Insert Locknuts (Inch Series) | |
| Open-End Blind Rivets with Break Mandrels (Metric Series) | |
| Part Identifying Number (PIN) Code System Standard for B18 Externally Threaded Products | |
| Part Identifying Number (PIN) Code System Standard for B18 Fastener Products | |
| Part Identifying Number (PIN) Code System Standard for B18 Internally Threaded Products | |
| Part Identifying Number (PIN) Code System Standard for B18 Nonthreaded Products | |
| Plain Washers | |
| Plated and Coated Finishes for Externally Threaded Metric Fasteners - Except Tapping and Wood Screws | |
| Plow Bolts | |
| Points for Pointed Bolt and Screw Products | |
| Polymeric subsurface stormwater management structures | |
| Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | |
| Profile polypropylene (PP) storm sewer pipe and fittings | |
| Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings/Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings | |
| PVC Underground Telecommunication Cable Ducting and Fittings | |
| Quality Assurance for Fasteners | |
| Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan | |
| Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System | |
| Recommendations Regarding the Concept of Equipage and Mandated versus Voluntary Considerations | |
| Recommended Practice for the Installation of Thermoplastic Drain, Storm, and Sewer Pipe and Fittings | |
| Round Head Bolts | |
| Round Head Square Neck Bolts with Large Head (Metric Series) | |
| SAFETY CODE FOR COMPRESSED AIR MACHINERY AND EQUIPMENT | |
| Safety Code for Conveyors, Cableways, and Related Equipment | |
| SAFETY STANDARD FOR AIR COMPRESSOR SYSTEMS; SPECIAL NOTICE - JULY 1987 | |
| SAFETY STANDARD FOR COMPRESSORS FOR PROCESS INDUSTRIES | |
| SCREW THREADS for Bolts, Machine Screws, Nuts, and Commercialy Tapped Holes | |
| Serrated Hex Flange Locknuts 90,000 psi (Inch Series) | |
| Service Order for use with Master Agreement Between Owner and Architect | |
| SLOTTED AND RECESSED HEAD SCREWS | |
| Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | |
| Socket Cap, Shoulder and Set Screws | |
| SOCKET HEAD CAP SCREWS (METRIC SERIES) GOVERNMENT KEY WORDS: SCREW, CAP, SOCKET HEAD - METRIC | |
| Special Notice to B19.3-1991 Safety Standard for Compressors for Process Industries | |
| Specification for Aluminum and Aluminum-Alloy Metal Arc-Welding Electrodes | |
| Specification for Aluminum Ingots for Remelting | |
| Specification for Brazing Procedure and Performance Qualification | |
| Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks | |
| Specification for Chromium-Nickel-Iron Alloy Castings (25-12 Class) for High-Temperature Service | |
| SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES | |
| Specification for Soldering Procedure and Performance Qualification | |
| Specification for Special Quality Zinc-Base Alloy Die Castings | |
| Specification for Welding Procedure and Performance Qualification for Thermoplastics | |
| Specification for Welding Procedure and Performance Qualification | |
| SPRING PINS - COILED TYPE (METRIC SERIES) | |
| Spring Pins - Slotted (Metric Series) | |
| Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pins | |
| Square and Hex Bolts and Screws | |
| Square and Hex Nuts | |
| Square and Rectangular Keys and Keyways: Width Tolerances and Deviations Greater than Basic Size | |
| Square and Rectangular Keys and Keyways | |
| Square Head Bolts (Metric Series) | |
| STANDARD CLASSIFICATION OF COPPERS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD CLASSIFICATION OF COPPERS | |
| STANDARD DEFINITIONS OF TERMS USED IN POWDER METALLURGY | |
| STANDARD FOR BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION | |
| Standard for Welding Procedure and Performance Qualification | |
| Standard Form of Agreement Between Owner and Architect for Integrated Project Delivery | |
| Standard Form of Architect's Services: Construction Contract Administration, for Use Where the Owner Has Retained Another Architect for Design Services | |
| Standard Form of Architect's Services: Design and Construction Contract Administration | |
| Standard Form of Architect's Services: On-Site Project Representation | |
| Standard Form of Architect's Services: Site Evaluation & Planning | |
| Standard Form of Architect\x92s Services: Commissioning | |
| Standard Form of Architect\x92s Services: Historic Preservation | |
| Standard Form of Architect\x92s Services: LEED Certification | |
| Standard Form of Architect\x92s Services: Programming | |
| Standard Form of Architect\x92s Services: Regional or Urban Planning | |
| Standard Form of Architect\x92s Services: Security Evaluation and Planning | |
| Standard Form of Architect\x92s Services: Value Analysis, for use where the Owner Employs a Value Analysis Consultant | |
| STANDARD GUIDE FOR PREPARATION OF HIGH-CARBON STEEL FOR ELECTROPLATING | |
| Standard Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments | |
| Standard Method of Life Test of Electrical Contact Materials | |
| STANDARD PRACTICE FOR PREPARATION OF LOW-CARBON STEEL FOR ELECTROPLATING - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR PREPARATION OF LOW-CARBON STEEL FOR ELECTROPLATING | |
| STANDARD PRACTICE FOR PREPARING TENSION TEST SPECIMENS FOR COPPER ALLOY SAND, PERMANENT MOLD, CENTRIFUGAL, AND CONTINUOUS CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR PREPARING TENSION TEST SPECIMENS FOR COPPER ALLOY SAND, PERMANENT MOLD, CENTRIFUGAL, AND CONTINUOUS CASTINGS | |
| Standard Practices for Sampling Metal Powders - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICES FOR SAMPLING METAL POWDERS | |
| STANDARD SPECIFICATION FOR ALUMINUM 1350 - H19 WIRE FOR ELECTRICAL PURPOSES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM 1350 DRAWING STOCK FOR ELECTRICAL PURPOSES | |
| STANDARD SPECIFICATION FOR ALUMINUM 1350-H19 WIRE FOR ELECTRICAL PURPOSES (METRIC) | |
| Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes | |
| Standard Specification for Aluminum 1350\x96H19 Wire for Electrical Purposes | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY BAR, ROD, AND WIRE (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY BAR, ROD, AND WIRE | |
| Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DIE FORGINGS, HAND FORGINGS, AND ROLLED RING FORGINGS (METRIC) | |
| Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DIE FORGINGS, HAND FORGINGS, AND ROLLED RING FORGINGS | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR CONDENSERS AND HEAT EXCHANGERS | |
| Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR SURFACE CONDENSERS, EVAPORATORS, AND HEAT EXCHANGERS (METRIC) | |
| Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY DRAWN SEAMLESS TUBES FOR SURFACE CONDENSERS, EVAPORATORS, AND HEAT EXCHANGERS | |
| Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND TUBES (METRIC) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND TUBES (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND TUBES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, SHAPES, AND TUBES (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ROLLED OR COLD FINISHED BAR, ROD, AND WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ROLLED OR COLD-FINISHED BAR, ROD, AND WIRE (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SHEET AND PLATE (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SHEET AND PLATE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SHEET AND PLATE | |
| STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS) (METRIC) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS) (METRIC) | |
| Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] | |
| STANDARD SPECIFICATION FOR ALUMINUM BARS FOR ELECTRICAL PURPOSES (BUS BARS) | |
| STANDARD SPECIFICATION FOR ALUMINUM-ALLOY DIE AND HAND FORGINGS | |
| STANDARD SPECIFICATION FOR ALUMINUM-ALLOY DRAWN SEAMLESS TUBES (METRIC) | |
| STANDARD SPECIFICATION FOR ALUMINUM-ALLOY DRAWN SEAMLESS TUBES | |
| Standard Specification for Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube | |
| Standard Specification for Aluminum-Alloy Sheet and Plate (Metric) | |
| Standard Specification for Bronze Castings for Bridges and Turntables - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR BRONZE CASTINGS FOR BRIDGES AND TURNTABLES | |
| STANDARD SPECIFICATION FOR CARTRIDGE BRASS SHEET, STRIP, PLATE, BAR, AND DISKS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM 1350 CONDUCTORS (METRIC) | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM 1350 CONDUCTORS | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY- STRANDED ALUMINUM CONDUCTORS, COATED STEEL-REINFORCED (ACSR) (METRIC) | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY-STRAN DED ALUMINUM 1350 CONDUCTORS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Concentric-Lay-Stran ded Aluminum 1350 Conductors | |
| Standard Specification for Concentric-Lay-Stran ded Aluminum Conductors, Coated-Steel Reinforced (ACSR) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Concentric-Lay-Stran ded Aluminum Conductors, Coated-Steel Reinforced (ACSR) | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY-STRAN DED COPPER AND COPPER-CLAD STEEL COMPOSITE CONDUCTORS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY-STRAN DED COPPER AND COPPER-CLAD STEEL COMPOSITE CONDUCTORS | |
| Standard Specification for Concentric-Lay-Stran ded Copper-Clad Steel Conductors - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY-STRAN DED COPPER-CLAD STEEL CONDUCTORS | |
| STANDARD SPECIFICATION FOR COPPER BAR, BUS BAR, ROD AND SHAPES (METRIC) | |
| STANDARD SPECIFICATION FOR COPPER BAR, BUS BAR, ROD, AND SHAPES | |
| Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar and Shapes | |
| STANDARD SPECIFICATION FOR COPPER, BUS BAR, ROD, AND SHAPES AND GENERAL PURPOSE ROD, BAR, AND SHAPES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY ROD AND BAR (METRIC) | |
| Standard Specification for Copper-Beryllium Alloy Rod and Bar - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY ROD AND BAR | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE (METRIC) | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY WIRE | |
| Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire | |
| STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) WIRE AND COPPER-NICKEL ALLOY WIRE (METRIC) | |
| STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) WIRE AND COPPER-NICKEL ALLOY WIRE (R 1985) | |
| STANDARD SPECIFICATION FOR CORED, ANNULAR, CONCENTRIC-LAY-STRAN DED COPPER CONDUCTORS (R 1985) | |
| STANDARD SPECIFICATION FOR CORED, ANNULAR, CONCENTRIC-LAY-STRAN DED COPPER CONDUCTORS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Cored, Annular, Concentric-Lay-Stran ded Copper Conductors | |
| STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF LEAD AND LEAD-TIN ALLOYS ON STEEL AND FERROUS ALLOYS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE, SHEET, STRIP AND ROLLED BAR (METRIC) | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR (METRIC) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR (METRIC) | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER-ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR | |
| STANDARD SPECIFICATION FOR HARD-DRAWN COPPER WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Hard-Drawn Copper Wire | |
| Standard Specification for Hard-Drawn Copper-Clad Steel Wire - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HARD-DRAWN COPPER-CLAD STEEL WIRE | |
| STANDARD SPECIFICATION FOR LEAD-COATED AND LEAD-ALLOY-COATED SOFT COPPER WIRE FOR ELECTRICAL PURPOSES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR LEAD-COATED AND LEAD-ALLOY-COATED SOFT COPPER WIRE FOR ELECTRICAL PURPOSES | |
| Standard Specification for Magnesium-Alloy Permanent Mold Castings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY PERMANENT MOLD CASTINGS | |
| Standard Specification for Magnesium-Base Alloy Extruded Tubes | |
| STANDARD SPECIFICATION FOR MEDIUM-HARD-DRAWN COPPER WIRE | |
| STANDARD SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES (METRIC) | |
| STANDARD SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES | |
| Standard Specification for Refined Antimony - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR REFINED ANTIMONY | |
| Standard Specification for Seamless Copper Bus Pipe and Tube - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR SEAMLESS COPPER BUS PIPE AND TUBE | |
| STANDARD SPECIFICATION FOR SILICON BRONZE AND SILICON BRASS SAND CASTINGS | |
| STANDARD SPECIFICATION FOR SINTERED IRON-COPPER STRUCTURAL PARTS | |
| Standard Specification for Standard Weight Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) | |
| STANDARD SPECIFICATION FOR TINNED HARD-DRAWN AND MEDIUM-HARD-DRAWN COPPER WIRE FOR ELECTRICAL PURPOSES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR TINNED HARD-DRAWN AND MEDIUM-HARD-DRAWN COPPER WIRE FOR ELECTRICAL PURPOSES | |
| STANDARD SPECIFICATION FOR TOUGH-PITCH FIRE- REFINED COPPER FOR WROUGHT PRODUCTS AND ALLOYS - REFINERY SHAPES | |
| STANDARD SPECIFICATION FOR TOUGH-PITCH FIRE- REFINED COPPER FOR WROUGHT PRODUCTS AND ALLOYS-REFINERY SHAPES | |
| STANDARD SPECIFICATION FOR TOUGH-PITCH FIRE-REFINED COPPER - REFINERY SHAPES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Tough-Pitch Fire-Refined Copper-Refinery Shapes | |
| STANDARD SPECIFICATION FOR WHITE METAL BEARING ALLOYS (KNOWN COMMERCIALLY AS "BABBITT METAL") - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR WHITE METAL BEARING ALLOYS (KNOWN COMMERCIALLY AS "BABBITT METAL") | |
| Standard Specification for White Metal Bearing Alloys (Known Commercially as \x93Babbitt Metal\x94) | |
| STANDARD SPECIFICATION FOR ZINC ALLOYS IN INGOT FORM FOR DIE CASTINGS | |
| STANDARD SPECIFICATION FOR ZINC AND ZINC-ALUMINUM (ZA) ALLOYS IN INGOT FORM FOR FOUNDRY AND DIE CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings | |
| Standard Terminology of Powder Metallurgy - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TERMINOLOGY OF POWDER METALLURGY | |
| Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel | |
| STANDARD TEST METHOD FOR MEASUREMENT OF THICKNESS OF ANODIC COATINGS ON ALUMINUM AND OF OTHER NONCONDUCTIVE COATINGS ON NONMAGNETIC BASIS METALS WITH EDDY-CURRENT INSTRUMENTS - INCLUDES STANDARD + REDLINE (PDF)... | |
| Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments | |
| Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR MODULUS OF ELASTICITY OF THERMOSTAT METALS (CANTILEVER BEAM METHOD) | |
| Standard Test Method for Resistivity of Electrical Conductor Materials - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR RESISTIVITY OF ELECTRICAL CONDUCTOR MATERIALS | |
| STANDARD TEST METHOD FOR SIEVE ANALYSIS OF METAL POWDERS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Sieve Analysis of Metal Powders | |
| Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHODS FOR FLOW RATE OF METAL POWDERS USING THE HALL FLOWMETER FUNNEL | |
| Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch... | |
| Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, E7XT-X,... | |
| Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc... | |
| Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored... | |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition,... | |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Spray Transfer Mode) of Aluminum (M-23/P-23), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, ER4043 or ER4943, in... | |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Austenitic Stainless Steel (M-8 or P-8, or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without... | |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8 or S-8), 18 Through 10 Gauge, in the As-Welded... | |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/ S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/... | |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8,P-8,or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick,... | |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1, S-1 to M-8, P-8, or S-8), 18 Through 10 Gauge, in... | |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless... | |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16... | |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (SWPS) 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick,... | |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8/P-8/S-8, Group 1), 10 Through 18 Gauge, in the As-Welded Condition,... | |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Stainless Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1,... | |
| Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition... | |
| Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Austenitic Stainless Steel (M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition,... | |
| Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Galvanized Steel, 10 Through 18 Gage, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition,... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX, E3XX-XX... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M-22 to P-22), 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M/P/S-22 TO M/P/S-22), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 Through 18 Gage, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition,... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gauge, in the As-Welded Condition,... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 7/8 Inch, in the As-Welded Condition, with or without Backing... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 3/4 in. | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Galvanized Steel, 10 Through 18 Gage, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX and ER3XX, As-Welded Condition... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through... | |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/ P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2,... | |
| Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition | |
| Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E71T-11, As-Welded Condition | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX-XX, As-Welded Condition (Primarily Pipe Applications) | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Steel, (M-8/P-8), 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the As-Welded Condition, With Backing | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pipe... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8), 10 Through 18 Gauge, in the As-Welded Condition, with or... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 3/4 Inch, in the As-Welded Condition, with Backing | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 1-1/2 in. | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER9018-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily... | |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Galvanized Steel, 10 Through 18 Gauge, in the As-Welded Condition, with or Without Backing | |
| Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch... | |
| Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38... | |
| STANDARD WELDING PROCEDURE SPECIFICATION(SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL(M-1/P-1, GROUP 1 OR 2), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, E6010 (VERTICAL UPHILL) FOLLOWED... | |
| Straightness Gage and Gaging for Bolts and Screws | |
| Supplement of ASME B18.18.2m-1987 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners | |
| SUPPLEMENT to ANSI B 18.2.1-1981 SQUARE AND HEX BOLTS AND SCREWS INCH SERIES | |
| Supplement to ASME B18.2.6 Fasteners for Use in Structural Applications | |
| Supplement to SOCKET HEAD CAP SCREWS (METRIC SERIES) | |
| TAPER PINS, DOWEL PINS, STRAIGHT PINS, GROOVED PINS, AND SPRING PINS (INCH SERIES) INCLUDING GROOVED DRIVE STUDS AND GROOVED T - HEAD COTTER PINS (R 1989) | |
| Tapered and Reduced Cross Section Retaining Rings (Inch Series) | |
| Tentative Specification for Copper and Copper-Alloy Arc-Welding Electrodes | |
| Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series) | |
| Thread Runout and Bolt Straightness Referee Gages and Gaging Procedure | |
| Threaded Rod (Metric Series) | |
| Threaded Rods (Inch Series) | |
| Thumb Screws and Wing Screws (Inch Series) | |
| Torque-Tension Test Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts | |
| TRAFFIC INTENSITY UNIT | |
| Wing Nuts (Inch Series) | |
| Wing Nuts, Thumb Screws, and Wing Screws | |
| Wood Screws (Inch Series) | |
| Woodruff Keys and Keyways | |
| WRENCHEAD BOLTS AND NUTS AND WRENCH OPENINGS |
| << Prev | Next >> |