Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1490
1500
1510
1520
1530
1540
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method | |
| Adhesives - Determination of tensile lap-shear strength of bonded assemblies | |
| Adhesives for non-pressure thermoplastic piping systems - Specifications | |
| Adhesives for thermoplastic piping systems for fluids under pressure - Specifications | |
| Aerosol containers - Aerosol foam flammability test | |
| Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture | |
| Aerosol containers - Determination of the ignition distance of the spray jet | |
| Aerosol containers - Enclosed space ignition test | |
| Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans | |
| Agglomerated stone - Terminology and classification (Endorsed by AENOR in August of 2006.) | |
| Agglomerated stone - Test methods - Part 10: Determination of chemical resistance | |
| Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient | |
| Agglomerated stone - Test methods - Part 12: Determination of dimensional stability | |
| Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity | |
| Agglomerated stone - Test methods - Part 15: Determination of compressive strength (Endorsed by AENOR in August of 2006.) | |
| Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles (Endorsed by AENOR in August of 2006.) | |
| Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption | |
| Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending) | |
| Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance | |
| Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance | |
| Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance | |
| Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole) | |
| Agglomerated stone - Test methods - Part 9: Determination of impact resistance | |
| Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements | |
| Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance... | |
| Air filters for general air cleaning - Terminology | |
| Aluminum and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectometric analysis | |
| Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography | |
| Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography | |
| Bicycles - Accessories for bicycles - Luggage carriers | |
| Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) | |
| Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) | |
| Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) | |
| Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance | |
| Building hardware - Fittings for shutters - Requirements and test methods | |
| Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods | |
| Building valves - Combined temperature and pressure relief valves - Tests and requirements. | |
| Building valves - Expansion groups - Tests and requirements. | |
| Building valves - Expansion valves - Tests and requirements. | |
| Building valves - Hydraulic safety groups - Tests and requirements | |
| Building valves - Inline hot water supply tempering valves - Tests and requirements | |
| Building valves - Pressure safety valves - Tests and requirements. | |
| Calcium aluminate cement - Composition, specifications and conformity criteria (Endorsed by AENOR in August of 2006.) | |
| Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST) (Endorsed by AENOR in October of 2006.) | |
| Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration | |
| Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) (Endorsed by AENOR in October of 2006.)... | |
| Characterisation of sludges - Settling properties - Part 2: Determination of thickenability (Endorsed by AENOR in October of 2006.) | |
| Characterization of sludges - Determination of calorific value | |
| Characterization of sludges - Determination of total phosphorus | |
| Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility | |
| Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges | |
| Characterization of sludges - Laboratory chemical conditioning procedure | |
| Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride | |
| Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods | |
| Characterization of waste - Preparation of test portions from the laboratory sample (Endorsed by AENOR in October of 2006.) | |
| Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan (Endorsed by AENOR in August of 2006.) | |
| Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics | |
| Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2) | |
| Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)... | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2,... | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area - Test method and... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase... | |
| Chemicals used for treatment of swimming pool water - Aluminium based coagulants | |
| Chemicals used for treatment of swimming pool water - Ozone | |
| Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , anhydrous | |
| Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , dihydrate | |
| Chemicals used for treatment of swimming pool water - Sodium hydrogen carbonate | |
| Chemicals used for treatment of swimming pool water - Sodium hydroxide | |
| Chemicals used for treatment of swimming pool water - Sodium hypochlorite | |
| Chemicals used for treatment of swimming pool water - Sulfuric acid | |
| Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid | |
| Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Phosphonic acids and salts | |
| Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts | |
| Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polyphosphates | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, solid | |
| Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use (Endorsed by AENOR in October of 2006.) | |
| Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use | |
| Chemicals used for treatment of water intended for human consumption - Sodium chlorate (Endorsed by AENOR in October of 2006.) | |
| Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using non-membrane technology | |
| Child care articles - Carry cots and stands - Safety requirements and test methods | |
| CHILD CARE ARTICLES. CARRY COTS AND STANDS. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Children's high chairs - Requirements and test methods | |
| Conditions for pressure classification of products for water and wastewater pipelines | |
| Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining | |
| Conveyor belts for use in underground installations - Electrical and flammability safety requirements | |
| Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS) | |
| Corrugated metal hose assemblies for pressure applications - Part 1: Requirements (Endorsed by AENOR in August of 2006.) | |
| Corrugated metal hose assemblies for pressure applications | |
| Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels | |
| Cranes - Bridge and gantry cranes | |
| Cranes - Requirements for container handling spreaders | |
| Cranes - Slewing jib cranes | |
| Cycles - Electrically power assisted cycles - EPAC Bicycles | |
| Decorative wall coverings - Roll and panel form | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 1:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 4:... | |
| Design of fans working in potentially explosive atmospheres | |
| DETERMINATION OF FLEXURAL STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. | |
| Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis | |
| Determination of the elasticity of fabrics - Part 1: Strip tests | |
| Determination of the elasticity of fabrics - Part 2: Multiaxial tests | |
| Determination of the elasticity of fabrics - Part 3: Narrow fabrics | |
| Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours | |
| Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G | |
| Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General... | |
| Devices to prevent pollution by backflow of potable water. Air gap with circular overflow (restricted). Family A-Type F | |
| Domestic and kitchen storage units and worktops - Safety requirements and test methods | |
| Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety | |
| Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy | |
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods | |
| Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods | |
| Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods | |
| Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in... | |
| EDI. DIRECTORY. D93-A. | |
| EDI. MESSAGE. DIRECT PAYMENT VALUATION MESSAGE (CONDPV). | |
| EDI. MESSAGE. ESTABLISHMENT OF CONTRACT (CONEST). | |
| EDI. MESSAGE. INVITATION TO TENDER (CONITT). | |
| EDI. MESSAGE. PAYMENT VALUATION MESSAGE (CONPVA). | |
| EDI. MESSAGE. QUANTITY VALUATION MESSAGE (CONQVA). | |
| EDI. MESSAGE. TENDER (CONTEN). | |
| Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10 | |
| Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9 | |
| Energy performance of buildings - Impact of Building Automation, Controls and Building Management | |
| Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings | |
| Execution of special geotechnical works - Deep mixing (Endorsed by AENOR in August of 2006.) | |
| Execution of special geotechnical works - Ground treatment by deep vibration (Endorsed by AENOR in August of 2006.) | |
| Execution of special geotechnical works - Vertical drainage | |
| Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions | |
| Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls | |
| Extended application of results from fire resistance tests - Part 8: Beams | |
| External cathodic protection of well casings | |
| Extruded particleboards - Specifications (Endorsed by AENOR in August of 2006.) | |
| Facility Management - Part 1: Terms and definitions | |
| Fasteners - Tightening performance - Torque/Angle simplified test method (Endorsed by AENOR in August of 2006.) | |
| Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)... | |
| Fertilizers and liming materials - Determination of cadmium content | |
| Fertilizers and liming materials - Determination of water content - Guidelines and recommendations | |
| Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling | |
| Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation | |
| Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps | |
| Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 4: Sampling for microbial presence | |
| Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity | |
| Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity | |
| Fire-fighting hoses - Non-percolating layflat hoses for fixed systems | |
| Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements | |
| Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements | |
| Fixed firefighting system - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 11: Physical properties and systems design of gas extinguishing systems for Halocarbon Blend 55 extinguishant (ISO 14520-17:2022, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO 14520-6:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9:2006, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2005, modified) | |
| Fixed firefighting systems - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2005, modified) | |
| Fixed firefighting systems - Water mist systems - Part 11: Test protocol for cable tunnels for open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 12: Test protocol for commercial deep fat cooking fryers for manually activated open nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 1: Design, installation, inspection and maintenance | |
| Fixed firefighting systems - Water mist systems - Part 4: Test protocol for non-storage occupancies for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 5: Test protocol for car garages for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 6: Test protocol for false floors and false ceilings for automatic nozzle systems | |
| Fixed firefighting systems - Water mist systems - Part 7: Test protocol for commercial low hazard occupancies for automatic nozzle systems | |
| FLANGES AND THEIR JOINTS - BOLTING - PART 1: SELECTION OF BOLTING | |
| Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated. | |
| Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated | |
| Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC | |
| Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 | |
| FLANGES AND THEIR JOINTS. DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES. PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS. | |
| Flanges and their joints. Gaskets for PN- designated flanges. Part 2: Spiral wound gaskets for use with steel flanges | |
| Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics (Endorsed by AENOR in October of 2006.) | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of waterproofing sheets during application of mastic asphalt... | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer | |
| Food processing machinery - Food depositors - Safety and hygiene requirements | |
| Foodstuffs - Determination of vitamin B6 (including its glycosylated forms) by HPLC (Endorsed by AENOR in August of 2006.) | |
| Furniture - Assessment of the effect of light exposure | |
| Furniture - Assessment of the surface resistance to abrasion | |
| Furniture - Assessment of the surface resistance to scratching | |
| Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods | |
| Gas explosion venting protective systems | |
| Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1:... | |
| Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2:... | |
| Geosynthetic barriers - Screening test method for determining the resistance to oxidation (Endorsed by AENOR in August of 2006.) | |
| Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics | |
| Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking | |
| Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria | |
| Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation | |
| Hand-held branchpipes for fire service use - Part 1: Common requirements | |
| Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16 | |
| Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 | |
| Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40 | |
| Health informatics - Service request and report messages - Part 1: Basic services including referral and discharge | |
| Heating boilers - Condensing heating boilers for fuel oil | |
| High Performance Helmets for Equestrian Activities | |
| Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation | |
| Identification and/or determination of the quantity of waste (Endorsed by AENOR in October of 2006.) | |
| Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW | |
| Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics | |
| Industrial valves - Mounting kits for part-turn valve actuator attachment | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters | |
| Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products | |
| Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method | |
| Inland navigation vessels - Boarding ladders | |
| Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions | |
| Inland navigation vessels - Flat bollards (Endorsed by AENOR in August of 2006.) | |
| Inland navigation vessels - Studless anchor chain - Accessories | |
| Inland navigation vessels - Studless anchor chain - Cable lifter (Endorsed by AENOR in August of 2006.) | |
| Inland navigation vessels and sea-going vessels - Navigation light | |
| Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms | |
| Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses | |
| Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems | |
| Installation and equipment for liquefied natural gas - Design of onshore installations | |
| Laboratory furniture - Storage units for laboratories - Requirements and test methods | |
| Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods | |
| Lifting platforms - Mast climbing work platforms | |
| Liming materials - Determination of product effect on soil pH - Soil incubation method | |
| Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking | |
| LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers | |
| LPG equipment and accessories - Discharge procedures for LPG rail tankers | |
| LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; procedure for checking before, during and after filling (Endorsed by... | |
| Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws | |
| Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning | |
| Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation | |
| Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications (Endorsed by AENOR in August of 2006.) | |
| Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test (Endorsed by AENOR in August of 2006.) | |
| Measuring method of the energy consumption of gas fired ovens | |
| Medical face masks - Requirements and test methods | |
| Metal bellows expansion joints for pressure applications | |
| Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method | |
| Mobile or movable jacks and associated lifting equipment | |
| Natural stone - Rough blocks - Requirements | |
| Natural stone - Rough slabs - Requirements | |
| Natural stone test methods - Determination of sound speed propagation | |
| Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources | |
| Non-destructive testing - Industrial computed radiography with phosphor imaging plates - Part 1: Classification of systems | |
| Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays | |
| Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors | |
| Non-preloaded structural bolting assemblies - Part 1: General requirements | |
| Non-preloaded structural bolting assemblies - Part 2: Suitability test | |
| Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 10: Web Services for Control Networking Protocol Specification (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate (Endorsed by AENOR... | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components | |
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers | |
| Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test | |
| Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use | |
| Performance of portable leak detectors and of room monitors for halogenated refrigerants | |
| Personal fall protection equipment - Rescue harnesses | |
| Personal fall protection equipment - Rescue lifting devices | |
| Personal fall protection equipment - Rescue loops | |
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified) (Endorsed by AENOR in February of 2005.)... | |
| Plastics - Evaluation of compostability - Test scheme and specifications | |
| Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods | |
| Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness | |
| Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints | |
| Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints | |
| Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints | |
| Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (Endorsed by AENOR in August of 2006.) | |
| Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints | |
| Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system | |
| Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADI ENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM... | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM | |
| Postal services - Digital postage marks - Applications, security and design | |
| Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail | |
| Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements | |
| Precast concrete products - Beam-and-block floor systems - Part 1: Beams | |
| Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks | |
| Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks | |
| Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks | |
| Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork | |
| Precast concrete products - Box culverts | |
| Precast concrete products - Bridge elements | |
| Precast concrete products - Classification of glassfibre reinforced concrete performance | |
| Precast concrete products - General rules for factory production control of metallic fibered concrete (Endorsed by AENOR in August of 2006.) | |
| Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) (Endorsed by AENOR in August of 2006.) | |
| Precast concrete products - Wall elements | |
| Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing | |
| Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and... | |
| Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) | |
| Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide (Endorsed by AENOR in October of 2006.) | |
| Protection of metallic materials against corrosion - Guidance on the assesment of corrosion likelihood in water circulation systems | |
| Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test | |
| Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types... | |
| Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting | |
| Quality management systems - EN ISO 9001:2015 for healthcare | |
| Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters | |
| Railway applications - Air conditioning for driving cabs - Part 2: Type tests | |
| Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters | |
| Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests | |
| Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate | |
| Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h | |
| Railway applications - Bodyside entrance systems (Endorsed by AENOR in July of 2006.) | |
| Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements (Endorsed by AENOR... | |
| Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements | |
| Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements | |
| Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification | |
| Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators | |
| Railway applications - Brake indicators | |
| Railway applications - Braking - Requirements for the brake system of coaches | |
| Railway applications - Crashworthiness requirements for railway vehicle bodies | |
| Railway applications - External visible and audible warning devices for trains - Part 1: Head, marker and tail lamps | |
| Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns | |
| Railway applications - Front windscreens for train cabs | |
| Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods | |
| Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe | |
| Railway applications - Suspension components - Air spring control elements (Endorsed by AENOR in October of 2006.) | |
| Railway applications - Suspension components - Torsion bar, steel | |
| Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes | |
| Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds | |
| Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a... | |
| Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction | |
| Railway applications - Track - Special purpose rail - Grooved and associated construction | |
| Railway applications - Welding of railway vehicles and components - Part 1: General | |
| Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer | |
| Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer | |
| Railway applications - Welding of railway vehicles and components - Part 3: Design requirements | |
| Railway applications - Welding of railway vehicles and components - Part 4: Production requirements | |
| Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation | |
| Railway applications - Welding of railway vehicles and components - Part 6: Maintenance welding requirements | |
| Railway applications - Windscreens for trains | |
| Railway applications. Straight and agled end cocks for brake pipe and main reservoir pipe | |
| Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements | |
| Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification | |
| Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking | |
| Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking | |
| Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking | |
| Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking | |
| Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection | |
| Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection | |
| Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 | |
| RESPIRATORY PROTECTIVE DEVICES. SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE. REQUIREMENTS, TESTING, MARKING. | |
| Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats. | |
| Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks | |
| Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | |
| Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform | |
| Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction | |
| Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel | |
| Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters | |
| Safety of industrial trucks - Self-propelled variable reach trucks | |
| Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (Endorsed by AENOR in May of 2010.) | |
| Sanitary appliances - Wash basins - Functional requirements and test methods | |
| Sanitary tapware - Electronic opening and closing sanitary tapware | |
| Shutters - Acoustic insulation relative to airborne sound - Expression of performance | |
| Single-use containers for human venous blood specimen collection | |
| Smoke alarm devices | |
| Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm | |
| Solid biofuels - Determination of ash content | |
| Solid biofuels - Determination of bulk density | |
| Solid biofuels - Determination of calorific value | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes | |
| Solid biofuels - Determination of particle density | |
| Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above | |
| Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below | |
| Solid biofuels - Determination of the content of volatile matter | |
| Solid biofuels - Sample preparation | |
| Solid biofuels - Sampling | |
| Solid hardwood panelling and cladding - Machined profiles elements | |
| Solid softwood panelling and cladding - Machined profiles without tongue and groove | |
| Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking | |
| Solid wood panelling and cladding - Characteristics, requirements and marking | |
| Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use | |
| Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method | |
| Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence | |
| Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method | |
| Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry | |
| Stationary source emissions - Determination of the water vapour in ducts - Standard reference method | |
| Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism | |
| Structural timber - Structural timber preservative treated against biological attack | |
| Surfaces for sports areas - Determination of slip resistance | |
| Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification (Endorsed by AENOR in October of 2006.) | |
| Surgical masks - Requirements and test methods | |
| Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent | |
| Technical drawings - Railway applications - Part 1: General principles | |
| Technical drawings - Railway applications - Part 2: Parts lists | |
| Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents | |
| Technical drawings - Railway applications - Part 4: Data exchange | |
| Temperature control devices and temperature limiters for heat generating systems | |
| Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) (Endorsed by AENOR in August of 2006.) | |
| Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete | |
| Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) | |
| Test methods for fibres in concrete - Part 1: Reference concretes | |
| Test methods for fibres in concrete - Part 2: Effect on concrete | |
| Textile floor coverings - Assessment of changes in appearance | |
| Textile floor coverings - Determination of sensitivity to spilled water | |
| Textile floor coverings - Determination of the density of the textile fleece backing | |
| TEXTILE FLOOR COVERINGS. ASSESSMENT OF CHANGES IN APPEARANCE. | |
| Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use | |
| Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use | |
| Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes | |
| Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area (Endorsed by AENOR in August of 2006.) | |
| Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics (Endorsed by AENOR in August of 2006.) | |
| Textiles - Mattress ticking - Specifications and test methods | |
| Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns (Endorsed by AENOR in August of 2006.) | |
| Textiles - Terry towels and terry towel fabrics - Specification and methods of test | |
| Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature (Endorsed by AENOR in August of 2006.) | |
| Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation (Endorsed by AENOR in August of 2006.) | |
| Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification | |
| Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation | |
| Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products | |
| Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance | |
| Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure | |
| Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface... | |
| Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method (Endorsed by AENOR in October of... | |
| Timber structures - Connectors - Requirements | |
| Timber structures - Dowel-type fasteners - Requirements | |
| Touch and close fasteners. Determination of resistance to frying after washing | |
| Transport services - Logistics - Glossary of terms (Endorsed by AENOR in August of 2006.) | |
| Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards | |
| Valves. Materials for bodies, bonnets and covers. Part 1: Steels specified in European Standards. | |
| Valves. Materials for bodies, bonnets and covers. Part 2: Steels other than those specified in European Standards. | |
| Valves. Materials for bodies, bonnets and covers. Part 3: Cast irons specified in European Standards. | |
| VEHICLE LIFTS. | |
| Vehicle lifts | |
| Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings | |
| Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings | |
| Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration | |
| Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems | |
| Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems | |
| Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems | |
| Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions | |
| VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS SECTION - DIMENSIONS | |
| Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage | |
| Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams | |
| Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (Endorsed by AENOR in August of 2006.) | |
| Waste management - Identification and/or determination of the quantity of waste | |
| Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) | |
| Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing | |
| Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing | |
| Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing | |
| Water conditioning equipment inside buildings - Installation, operation, maintenance and repair | |
| Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing | |
| Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing | |
| Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing | |
| Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment | |
| Water quality - Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment | |
| Water quality - Guidance on the scope and selection of fish sampling methods (Endorsed by AENOR in October of 2006.) | |
| Water Quality - Guidance standard for assessing the hydromorphological features of rivers | |
| Water quality - Guidance standard for the sampling of zooplankton from standing waters | |
| Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm\xf6hl technique) | |
| Water quality - Sampling of fish with multi-mesh gillnets | |
| WATER SUPPLY - REQUIREMENTS FOR SYSTEMS AND COMPONENTS FOR THE STORAGE OF WATER | |
| Welding and allied processes - Definitions of metal welding processes | |
| Welding and allied processess. Environmental check list | |
| Welding consumables - Welding consumables for hard-facing | |
| Windows - Determination of the resistance to racking | |
| Windows - Determination of the resistance to static torsion | |
| WINDOWS, DOORS, SHUTTERS AND BLINDS - BULLET RESISTANCE - REQUIREMENTS AND CLASSIFICATION | |
| Wood flooring - Sampling procedures for evaluation of conformity (Endorsed by AENOR in September of 2006.) | |
| Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick (Endorsed by AENOR in September of 2006.) | |
| Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick | |
| Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method | |
| Wood-based panels - Flaxboards - Specifications | |
| Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method |
| << Prev | Next >> |