Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1490
1500
1510
1520
1530
1540
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Adhesives for tiles - Concrete slabs for tests | |
| Adhesives for tiles - Determination of open time | |
| Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives | |
| Adhesives for tiles - Determination of wetting capability | |
| Aggregates for mortar. | |
| Aggregates for mortar | |
| Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction | |
| Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury. | |
| Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury | |
| Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore). Part 1: Specifications. | |
| Armourstone - Part 1: Specification. | |
| Armourstone - Part 1: Specification | |
| Armourstone - Part 2: Test methods | |
| BDS: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCIA SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D).\xc7 (Endorsed by AENOR in September of 1996.) | |
| Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods (Endorsed by AENOR in August of 2006.) | |
| Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus | |
| Bitumen and bituminous binders - Determination of storage stability of modified bitumen | |
| Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen | |
| Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen | |
| Bituminous mixtures - Material specifications - Part 20: Type Testing (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Material specifications - Part 21: Factory Production Control (Endorsed by AENOR in September of 2006.) | |
| Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt (Endorsed by AENOR in August of 2006.) | |
| Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) | |
| BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION. CAPACITORS FOR WHICH SAFETY TESTS ARE REQUIRED (SAFETY TESTS ONLY) (Endorsed by AENOR in December of 1997.) | |
| Blank Detail Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric (Endorsed by AENOR in November of 2002.) | |
| BLANK DETAIL SPECIFICATION: FIXED MULTILAYER CERAMIC SURFACE MOUNTING CAPACITORS. ASSESSMENT LEVEL EZ (Endorsed by AENOR in December of 1996.) | |
| BLANK DETAIL SPECIFICATION: FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS. ASSESSMENT LEVEL E (Endorsed by AENOR in July of 1998.) | |
| BLANK DETAIL SPECIFICATION: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION. FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED (Endorsed by AENOR in November of 1998.) | |
| BLANK DETAIL SPECIFICATION: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION. FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED ) (Endorsed by AENOR in November of 1998.) | |
| Brazing. Procedure approval. | |
| Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances | |
| Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows | |
| Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction stay) | |
| Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware | |
| Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices | |
| Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches | |
| Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware (Endorsed by AENOR in September of 2006.)... | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes | |
| Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware | |
| CATHODIC PROTECTION FOR STEEL OFFSHORE FLOATING STRUCTURES. | |
| Cement bonded particleboards - Determination of frost resistance | |
| Characterization of sludges - Determination of Kjeldahl nitrogen | |
| Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods. | |
| Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments | |
| Chemicals used for treatment of water intended for human consumption - Acetic Acid | |
| Chemicals used for treatment of water intended for human consumption - Ethanol | |
| Chemicals used for treatment of water intended for human consumption - Methanol | |
| Child use and care articles - Baby carriers - Safety requirements and test methods - Part 2: Soft carrier | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance | |
| Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance (Endorsed by AENOR in August... | |
| Clay pavers - Requirements and test methods. | |
| Common rules for precast concrete products | |
| COMPRESSED NATURAL GAS VEHICLES OPERATIONS. | |
| Concrete kerb units - Requirements and test methods | |
| Concrete paving blocks - Requirements and test methods | |
| Concrete paving flags - Requirements and test methods | |
| CONDENSING UNITS FOR REFRIGERATION. RATING CONDITIONS, TOLERANCES AND PRESENTATION OF MANUFACTURER'S PERFORMANCE DATA. | |
| Copper and copper alloys - Hot-dip tinned strip | |
| Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum | |
| Cranes - Non-fixed load lifting attachments | |
| Cranes - Safety - Design - Requirements for equipment | |
| Cranes - Safety - Hand powered cranes | |
| Cranes - Safety - Non-fixed load lifting attachments | |
| Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing. | |
| Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements | |
| Cryogenic vessels. Pumps for cryogenic service. | |
| Curtain walling - Resistance to wind load - Performance requirements. | |
| Curtain walling - Terminology | |
| DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. | |
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A | |
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B | |
| Dimensional classification of round timber | |
| Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW | |
| Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements | |
| ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF EMISSIONS OF HYBRID VEHICLES. PART 1: THERMAL ELECTRIC HYBRID VEHICLES. | |
| Electrically propelled vehicles. Terminology. | |
| Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography | |
| Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 3: Determination of [S,S]-EDDS by ion pair chromatography | |
| Fertilizers - Determination of chelating agents in fertilizers by ion chromatography - Part 2: EDDHA and EDDHMA | |
| FERTILIZERS - DETERMINATION OF FLOW RATE. | |
| Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium | |
| Fertilizers - Determination of water content (Karl Fischer methods) - Part 2: 2-propanol as extracting medium | |
| Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients | |
| FIXED MULTILAYER CERAMIC SURFACE MOUNTING CAPACITORS. ASSESSMENT LEVELS EZ AND DZ. (Endorsed by AENOR in November of 1997.) | |
| Flanges and their joints - Pipework components - Definition and selection of PN | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling. | |
| GAS WELDING EQUIPMENT. SMALL KITS FOR GAS BRAZING AND WELDING. | |
| GAS WELDING EQUIPMENT. THERMOPLASTIC HOSES FOR WELDING AND ALLIED PROCESSES. | |
| Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity | |
| Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises | |
| General requirements for components used for renovation and repair of drain and sewer systems outside buildings | |
| GENERIC SPECIFICATIONS: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (Endorsed by AENOR in December of 1997.) | |
| Geosynthetic Barriers - Characteristics required for use in the construction of canals | |
| Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams | |
| Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures | |
| Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) | |
| Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects | |
| Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals | |
| Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals | |
| Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways | |
| Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams | |
| Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) | |
| Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures | |
| Geotextiles and geotextile-related products - Required characteristics for use in drainage systems | |
| Geotextiles and geotextile-related products - Required characteristics for use in earthworks, foundations and retaining structures | |
| Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems | |
| Geotextiles and geotextile-related products - Required characteristics for use in the construction of canals | |
| Geotextiles and geotextile-related products - Required characteristics for use in the construction of railways | |
| Geotextiles and geotextile-related products - Required characteristics for use in the construction of reservoirs and dams | |
| Geotextiles and geotextile-related products - Required characteristics for use in the construction of roads and other trafficked areas | |
| Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTIC REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION). | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS). | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES. | |
| GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria | |
| GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance | |
| GRP tanks and vessels for use above ground - Part 3: Design and workmanship | |
| Hardwood round timber - Qualitative classification - Part 1: Oak and beech | |
| Hardwood round timber - Qualitative classification - Part 2: Poplar | |
| HARDWOOD ROUND TIMBER. QUALITATIVE CLASSIFICATION. PART 3: ASH AND MAPLES AND SYCAMORE. | |
| Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria | |
| Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria | |
| Hydraulic road binders - Part 3: Conformity evaluation | |
| Identification card systems - Man-machine interface - Part 1: Design principles for the user interface - Symbols in the form of icons on screens and/or pictograms (Endorsed by AENOR in... | |
| IDENTIFICATION CARD SYSTEMS. MAN-MACHINE INTERFACE. PART 1: DESIGN PRINCIPLES AND SYMBOLS FOR THE USER INTERFACE (Endorsed by AENOR in June of 2000.) | |
| IDENTIFICATION CARD SYSTEMS. MAN-MACHINE INTERFACE. PART 3: KEY PADS (Endorsed by AENOR in November of 2000.) | |
| IDENTIFICATION CARD SYSTEMS. MAN-MACHINE INTERFACE. PART 4: CODING OF USER REQUIREMENTS FOR PEOPLE WITH SPECIAL NEEDS (Endorsed by AENOR in November of 2000.) | |
| INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS. | |
| Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics | |
| Industrial, commercial, garage doors and gates - Product standard, performance characteristics | |
| INLAND NAVIGATION VESSELS. SAFETY REQUIREMENTS FOR WALKWAYS AND WORKING PLACES. | |
| Internal blinds - Performance requirements including safety | |
| Kitchen sinks - Functional requirements and test methods | |
| Ladders - Part 1: Terms, types, functional sizes (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2025.) | |
| Ladders - Part 1: Terms, types, functional sizes | |
| Ladders - Part 2: Requirements, testing, marking (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in March of 2018.) | |
| Ladders - Part 2: Requirements, testing, marking (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2025.) | |
| Ladders - Part 2: Requirements, testing, marking | |
| Ladders - Part 3: Marking and user instructions (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2025.) | |
| Ladders - Part 3: User Instructions | |
| Ladders - Part 4: Single or multiple hinge-joint ladders (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2025.) | |
| Ladders - Part 4: Single or multiple hinge-joint ladders | |
| Ladders - Part 6: Telescopic ladders (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2025.) | |
| Ladders - Part 6: Telescopic ladders | |
| LADDERS. REQUIREMENTS, TESTING, MARKING. | |
| Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods | |
| Leak detection systems - Part 1: General principles | |
| Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems | |
| Leak detection systems - Part 3: Liquid systems for tanks | |
| Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks | |
| Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems | |
| Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems | |
| Leak detection systems - Part 5: Tank gauge leak detection systems | |
| Leak detection systems - Part 6: Sensors in monitoring wells | |
| Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets | |
| Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets | |
| Liming materials - Determination of calcium content - Oxalate method. | |
| LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction | |
| Maintenance - Documentation for maintenance | |
| Maintenance - Guideline on preparation of maintenance contracts | |
| Maintenance - Maintenance terminology | |
| Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and of the mass of the filling. | |
| Means for resealing threaded joints of gas pipework in buildings. | |
| Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test | |
| Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method (Endorsed by AENOR in August of 2006.) | |
| NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD. | |
| Non destructive testing - Terminology - Part 1: List of general terms | |
| Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing | |
| NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION | |
| Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing | |
| Non destructive testing. Leak testing. Calibration of reference leaks for gases. | |
| Non-destructive testing - Leak testing - Pressure change method | |
| Non-destructive testing - Leak testing - Tracer gas method | |
| Non-destructive testing - Terminology - Part 10: Terms used in visual testing | |
| NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 2: TERMS COMMON TO THE NON-DESTRUCTIVE TESTING METHODS | |
| Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing | |
| Non-destructive testing - Terminology - Part 7: Terms used in magnetic particle testing | |
| Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing | |
| Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing | |
| Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials | |
| Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing | |
| Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements | |
| Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' | |
| Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' | |
| Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' | |
| Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements | |
| Open data communication in building automation, controls and building management - Home and building electronic systems - Part 2: KNXnet/IP Communication (Endorsed by AENOR in December of 2006.) | |
| Open fronted gas-fired independent space heaters | |
| Packaging - Specification for tensional steel strapping | |
| Packaging - Specification for tensional strapping for lifting, lashing and securing of loads. | |
| Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes (Endorsed by AENOR in August of 2006.) | |
| Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification | |
| Plastics - Thermoplastic covering films for use in agriculture and horticulture | |
| Plastics - Thermoplastic silage films and tubes for use in agriculture | |
| Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and... | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE... | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the... | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Requirements for pipes, fittings and the system. | |
| Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres | |
| Precast concrete products - Street furniture and garden products | |
| Prefabricated timber formwork beams - Requirements, classification and assessment. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead | |
| Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress | |
| Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods | |
| Protective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors | |
| Protective helmets - Test methods - Part 8: Electrical properties | |
| Railway application. Track. Switches and crossings. Part 4: Actuation, locking and detection | |
| Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests | |
| Railway applications - Air conditioning for main line rolling stock - Part 2 : Type tests | |
| Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements | |
| Railway applications - Braking - Mass transit brake systems - Part 2: Methods of test | |
| Railway applications - Electrical lighting for rolling stock in public transport systems | |
| Railway applications - Suspension components - Helical suspension springs, steel | |
| Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line | |
| Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track | |
| Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements | |
| Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers (Endorsed by AENOR in August of 2003.) | |
| Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers (Endorsed by AENOR in August of 2003.) | |
| Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings | |
| Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements | |
| Railway applications - Track - Switches and crossings - Part 1: Definitions | |
| Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design | |
| Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction | |
| Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection | |
| Railway applications - Track - Switches and crossings - Part 5: Switches | |
| Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings (Endorsed by AENOR in April of 2006.) | |
| Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings | |
| Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts | |
| Railway applications - Track - Switches and crossings - Part 8: Expansion devices | |
| Railway applications - Track - Switches and crossings - Part 9: Layouts | |
| Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance | |
| Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint (Endorsed by AENOR in August of 2003.) | |
| Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading (Endorsed by AENOR in August of 2003.) | |
| Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance | |
| Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness | |
| Railway applications - Wheelsets and bogies - Axles - Product requirements | |
| Railway applications - Wheelsets and bogies - Non-powered axles - Design method | |
| Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals | |
| Railway applications - Wheelsets and bogies - Powered axles - Design method | |
| Railway applications - Wheelsets and bogies - Wheels - Product requirements | |
| Railway applications - Wheelsets and bogies - Wheelsets - Product requirements | |
| Railway applications. Track. Switches and crossings. Part 5: Switches | |
| Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates | |
| Refrigerating systems and heat pumps - Competence of personnel | |
| Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation | |
| Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification. | |
| Respiratory protective devices - Classification. | |
| Respiratory protective devices - Definitions of terms and pictograms | |
| Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage. | |
| Respiratory protective devices - Methods of test - Part 2: Practical performance tests. | |
| Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance. | |
| Respiratory protective devices - Methods of test - Part 4: Flame tests | |
| Respiratory protective devices - Methods of test - Part 5: Climatic conditions. | |
| Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air. | |
| Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration (Endorsed by AENOR in September of 2008.) | |
| Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging | |
| RESPIRATORY PROTECTIVE DEVICES. NOMENCLATURE OF COMPONENTS. | |
| Road lighting - Part 2: Performance requirements | |
| Road lighting - Part 3: Calculation of performance | |
| Road lighting - Part 4: Methods of measuring lighting performance | |
| Road lighting - Part 5: Energy performance indicators | |
| Round and sawn timber - Method of measurement of biological degrade | |
| Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber | |
| Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules | |
| Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations | |
| Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber | |
| Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber | |
| ROUND AND SAWN TIMBER. DETERMINATION OF THE BATCH VOLUME OF SAWN TIMBER. | |
| ROUND AND SAWN TIMBER. METHOD OF MEASUREMENT OF FEATURES. | |
| ROUND AND SAWN TIMBER. PERMITTED DEVIATIONS AND PREFERRED SIZES. PART 2: HARDWOOD SAWN TIMBER. | |
| Rubber- or plastics-coated fabrics - Terminology. | |
| Safety requirements for cableway installations designed to carry persons - Civil engineering works | |
| Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment (Endorsed by AENOR in May of 2005.) | |
| Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems (Endorsed by AENOR in April of 2006.) | |
| Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems (Endorsed by AENOR in May of 2005.) | |
| Safety requirements for superabrasives (Endorsed by AENOR in June of 2005.) | |
| Safety requirements for superabrasives (Endorsed by AENOR in October of 2001.) | |
| Sectional Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric (Endorsed by AENOR in November of 2002.) | |
| SECTIONAL SPECIFICATION: FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (Endorsed by AENOR in July of 1998.) | |
| Shutters - Hard body impact and prevention of access - Test methods | |
| Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product. | |
| Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria | |
| Silica fume for concrete - Part 2: Conformity evaluation | |
| Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981 modified) | |
| Size designation of clothes - Part 2: Primary and secondary dimensions. | |
| Size designation of clothes - Part 3: Body measurements and intervals (Endorsed by AENOR in January of 2014.) | |
| Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers | |
| Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method | |
| Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method | |
| Solid wood panels (SWP) - Bonding quality - Test method | |
| Solid wood panels (SWP) - Requirements | |
| Space engineering standards - Policy and principles | |
| Space product assurance - General requirements - Part 1: Policy and principles | |
| Spectator facilities - Part 4: Seats - Product characteristics | |
| Spectator facilities - Part 8: Safety Management | |
| SS: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED). (Endorsed by AENOR in November of 1999.) | |
| Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method | |
| Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems | |
| Steel wire rope slings - Safety - Part 1: Slings for general lifting service | |
| Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer | |
| Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings | |
| Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity | |
| Structural bearings - Part 3: Elastomeric bearings | |
| Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads | |
| Swimming pool equipment - Part 1: General safety requirements and test methods. | |
| Swimming pool equipment - Part 1: General safety requirements and test methods | |
| Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends. | |
| Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends | |
| Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features | |
| Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes. | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly. | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly | |
| Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings | |
| Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings | |
| Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing | |
| Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing | |
| Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips | |
| Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket | |
| Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket | |
| Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members | |
| Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings | |
| Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test | |
| TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 2: BITUMEN NUMBER. | |
| Textile floor coverings - Determination of the apparent effective thickness of the backing (Endorsed by AENOR in August of 2006.) | |
| Textiles - Monofilaments - Determination of linear density. | |
| Thermal insulating products - Evaluation of conformity. | |
| Thermal insulating products - Evaluation of conformity | |
| Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion | |
| Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH | |
| Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation | |
| Thermal insulating products. Evaluation of conformity | |
| Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification | |
| Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification | |
| Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification | |
| Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification | |
| Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification | |
| Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification | |
| Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification | |
| Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification. | |
| Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification | |
| Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification | |
| Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification | |
| Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification. | |
| Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification | |
| Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification | |
| Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification | |
| Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements | |
| Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints | |
| Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel | |
| Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling (Endorsed by AENOR in August of 2006.)... | |
| Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder (Endorsed by AENOR in September of 2006.) | |
| Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures (Endorsed by AENOR in September of 2006.) | |
| Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys | |
| Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2024.) | |
| Unfired pressure vessels - Part 1: General | |
| Unfired pressure vessels - Part 2: Materials | |
| Unfired pressure vessels - Part 3: Design | |
| Unfired pressure vessels - Part 4: Fabrication | |
| Unfired pressure vessels - Part 5: Inspection and testing (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2024.) | |
| Unfired pressure vessels - Part 5: Inspection and testing | |
| Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | |
| Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys | |
| Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics | |
| Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts | |
| Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification | |
| Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces | |
| Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 10: Humidity controlled extract air terminal device | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation... | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation... | |
| Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 9: Externally mounted humidity controlled air transfer device | |
| Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand | |
| VENTILATION FOR BUILDINGS. CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN DWELLINGS | |
| VENTILATION FOR BUILDINGS. PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION . PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES | |
| Visibility accessories for non-professional use - Test methods and requirements. | |
| Wall-hung urinals - Functional requirements and test methods | |
| Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 \xb5m to 150 \xb5m - Requirements for performances, safety and testing | |
| Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 \xb5m to less than 80 \xb5m - Requirements for performance, safety and testing | |
| Windows - Behaviour between different climates - Test method | |
| Windows - Classification of mechanical properties - Racking, torsion and operating forces. | |
| Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents. | |
| Wood flooring - Solid lamparquet products. | |
| Wood flooring - Solid parquet elements with grooves and/or tongues. | |
| Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system | |
| Wood-based panels - Determination of withdrawal capacity of fasteners. |
| << Prev | Next >> |