Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1470
1480
1490
1500
1510
1520
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1540
1550
1560
1570
1580
1590
1600
1620
| Product Name | Notes |
|---|---|
| "T" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME TRANSPORT TANKS ACCREDITATION PACKAGE - INCLUDES ASME BPVC-IIA, BPVC-IIB, BPVC-IIC, BPVC-IID, BPVC-V, BPVC-IX, ASME BPVC-XII, AND ASME CA-1 | |
| 9g Transport Airplane Seats Certififed By Static Testing | |
| Active Airborne Global Navigation Satellite System (GNSS) Antenna | |
| ADAPTORS AND SEALS FOR PIPE CONNECTIONS TO AIRCRAFT PITOT/STATIC INSTRUMENTS AND ASSOCIATED EQUIPMENT | |
| Additional Transmission Performance Guidelines for 4-Pair 100 Ohm Category 5 Cabling | |
| Additional Transmission Specifications for Unshielded Twisted-Pair Connecting Hardware | |
| Adhesive Bubbles and Voids in Fiber Optic Components: Guidance, Issues, and Challenges | |
| Administration of Parameter Value Assignment of cdma2000 Spread Spectrum Standards | |
| Administration of Parameter Value Assignments for Cdma2000 Spread Spectrum Standards | |
| Administration of Parameter Value Assignments for TIA/EIA Spread Spectrum Standards | |
| Administration of Parameter Value Assignments for TIA/EIA Wideband Spread Spectrum Standards | |
| Advanced Technical Ceramics - Unified Classification System | |
| Air Data Computer | |
| Air Traffic Control Radar Beacon System (ATCRBS) Airborne Equipment | |
| Air-Speed Tubes (Electrically Heated) - Article | |
| Airborne Automatic Direction Finding (ADF) Equipment | |
| Airborne ILS Localizer Receiving Equipment Operating within the Radio Frequency Range of 108 - 112 Megahertz (MHz) | |
| Airborne Multipurpose Electronic Displays | |
| Airborne Navigation Data Storage System | |
| Airborne Navigation Sensors Using The Global Positioning System (GPS) Augmented By The Wide Area Augmentation System (WAAS) | |
| Airborne Navigation Sensors Using The Global Positioning System Augmented By The Satellite Based Augmentation System (SBAS) | |
| Airborne Navigation Sensors Using The Global Positioning System Augmented By The Satellite Based Augmentation System | |
| Airborne Passive Thunderstorm Detection Equipment | |
| Airborne Radar Altimeter Equipment (For Air Carrier Aircraft) | |
| Airborne Static ('DC to DC') Electrical Power Converter (For Air Carrier Aircraft) | |
| Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS) | |
| Airborne Weather and Ground Mapping Pulsed Radars | |
| Airborne Weather Radar Equipment | |
| Airborne Windshear Warning And Escape Guidance Systems For Transport Airplanes | |
| Aircraft Audio Systems And Equipment | |
| Aircraft Bearings | |
| Aircraft Clamps | |
| Aircraft Fabric, Grade A | |
| Aircraft Mechanical Fastener | |
| AIRCRAFT POSITION LIGHTS | |
| Aircraft Seals | |
| Aircraft Seats and Berths | |
| Aircraft Turnbuckle Assemblies and/or Turnbuckle Safetying Devices | |
| Aircraft Wheels and Wheel-Brake Assemblies, with Addendum I | |
| Aircraft Wheels, Brakes And Wheel/Brake Assemblies For Parts 23, 27 And 29 Aircraft | |
| Alternate Connector for Use with ANSI/EIA-232-D and ANSI/EIA-530 | |
| Alternate Uses of Clear to Send and Local Loopback in ANSI/EIA-232-D and ANSI/EIA-530 | |
| Altimeter, Pressure Actuated, Sensitive Type | |
| ALUMINUM-PIGMENT; POWDER AND PASTE, FOR PAINT | |
| Amendment-1, Airspeed Tubes (Electrically Heated) | |
| AMYL ACETATE, TECHNICAL | |
| ANTISEIZE COMPOUND, WHITE LEAD BASE GENERAL PURPOSE (FOR THREADED FITTINGS) | |
| Application Channel Attenuation and Supportable Distances | |
| Application Guidelines for TIA/EIA-485-A | |
| Assignment of Access Overload Classes in the Cellular Telecommunications Services | |
| Audio Selector Panels and Amplifiers | |
| Automatic Flight Guidance And Control System (AFGCS) Equipment | |
| Automatic Pilots | |
| Automobile used parts - Designation system and basic for specifications | |
| Bank and Pitch Instruments (Indicating Gyro-Stabilized Type) (Gyroscopic Horizon, Attitude Gyro) | |
| Basic function of quick charger for the electric vehicle | |
| BEAD PROFILE FOR AIRCRAFT PIPING AND DUCTING (FLEXIBLE CONNECTIONS) | |
| BEADS (GLASS SPHERES) RETRO-REFLECTIVE | |
| BLUE-LEAD, BASIC-SULPHATE, DRY AND PASTE-IN-OIL | |
| Broadband Data Protocol Standards Overview | |
| BUTYL ACETATE: NORMAL (FOR USE IN ORGANIC COATINGS) | |
| BUTYL ALCOHOL, NORMAL (BUTANOL) (FOR USE IN ORGANIC COATINGS) | |
| BUTYL ALCOHOL: SECONDARY (FOR USE IN ORGANIC COATINGS) | |
| CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) | |
| CALKING COMPOUNDS, METAL SEAM AND WOOD SEAM | |
| Capabilities Requirements Mapping for cdma2000 Standards | |
| Cargo Compartment Fire Detection Instruments | |
| Cargo Pallets, Nets And Containers (Unit Load Devices) | |
| Cargo Pallets, Nets, and Containers | |
| cdma2000 Multimedia Services Evaluation Methodology: Software Tools | |
| cdma2000 Multimedia Services Evaluation Methodology | |
| Cellular Application Level Testing for IS-41 Revision B, TSB51 and IS-53 | |
| Cellular Digital Packet Data System Specification - Part 1000 Overview of Implementor Guidelines | |
| Cellular Digital Packet Data System Specification - Part 1010 Intermediate System | |
| Cellular Digital Packet Data System Specification - Part 1012 CDPD Network Support Services | |
| Cellular Digital Packet Data System Specification - Part 1013 Directory Services | |
| Cellular Digital Packet Data System Specification - Part 1014 Application-Entity Look-Up Directory Profile | |
| Cellular Digital Packet Data System Specification - Part 1015 CDPD Subscriber Directory Profile | |
| Cellular Digital Packet Data System Specification - Part 1018 Authentication Services | |
| Cellular Digital Packet Data System Specification - Part 1020 CDPD Domain Name System | |
| Cellular Digital Packet Data System Specification - Part 1021 Service Provider Interoperability Test - Plan Overview | |
| Cellular Digital Packet Data System Specification - Part 1022 Parameter Configuration Guidelines | |
| Cellular Digital Packet Data System Specification - Part 2010 Mobile End System | |
| Cellular Digital Packet Data System Specification - Part 2011 Mobile Data Base Station | |
| Cellular Digital Packet Data System Specification - Part 2012 CDPD Mobile Data Intermediate System | |
| Cellular Digital Packet Data System Specification - Part 2013 CDPD External Interfaces | |
| Cellular Digital Packet Data System Specification - Part 2015 Subscriber Identity Module Functional Characteristics | |
| Cellular Digital Packet Data System Specification - Part 2016 Multicast Perspectives | |
| Cellular Digital Packet Data System Specification - Part 2018 M-ES EID Assignment | |
| Cellular Digital Packet Data System Specification - Part 3010 Unique Identifiers Name and Numbering Plan | |
| Cellular Digital Packet Data System Specification - Part 3011 Administration of Unique Identifiers Name and Numbering Plan | |
| Cellular Digital Packet Data System Specification - Part 3012 IP and CLNP Routing Architecture and Addressing Plan | |
| Cellular Mobile Receiver Dynamic Range | |
| Cellular Radiotelecommunicati ons Intersystem Operations: Authentication, Signaling Message Encryption and Voice Privacy | |
| CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR FERROUS SURFACES (BASE FOR ORGANIC COATINGS) | |
| CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) | |
| CHROME-GREEN, PURE, DRY (PAINT-PIGMENT) | |
| CHROME-YELLOW AND CHROME-ORANGE; DRY (PAINT-PIGMENT) | |
| COATING COMPOUND, BITUMINOUS, FILLERS, SOLVENT TYPE, ALUMINUM PIGMENTED | |
| COATING COMPOUND, BITUMINOUS, SOLVENT TYPE ACID-RESISTANT | |
| COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, ASBESTOS FILLED, ALUMINUM PIGMENTED | |
| COATING COMPOUND, PAINT ANTISWEAT | |
| COATING COMPOUND, REFLECTIVE | |
| COATING, OBLITERATING | |
| COATINGS, ANTI-SWEAT | |
| COATINGS, EXTERIOR, FOR TINNED FOOD CANS | |
| Cockpit Voice Recorder Systems | |
| Code of practice for creep/fatigue testing of cracked components | |
| Commentary- Structural Standard for Antenna Supporting Structures, Antennas and Small Wind Turbine Support Structures | |
| Common IMS Impacts to 3GPP2 Specifications | |
| Comparison of PBX Transmission Requirements in Standards ANSI/TIA/EIA-464-B and ETSI ETS 300 439 | |
| Crewmember Demand Oxygen Masks | |
| Crewmember Oxygen Regulators, Demand | |
| Criteria and Methodology to Assess Interference between Systems in the Fixed Service and the Mobile-Satellite Service in the Band 2165-2200 MHz | |
| DC Quick Charger for Use with Electric Vehicles Test Suite Specification\x97Ver sion 1.0 | |
| Densified refuse derived fuel | |
| Determination of sulfur compounds in kerosene by gas chromatography/induc tively coupled plasma mass spectrometry | |
| Devices That Prevent Blocked Channels Used in Two-Way Radio Communications Due to Unintentional Transmissions | |
| Digital Radio Technical Standards \x96 Public Safety Wideband Data Standards Project \x96 Wideband Data System and Standards Definition | |
| Direction Instrument, Magnetic (Gyroscopically Stabilized) | |
| Direction Instrument, Non-Magnetic (Gyroscopically Stabilized) | |
| Distance Measuring Equipment (DME) Operating within the Radio Frequency Range of 960 - 1215 Megahertz | |
| DTE/DCE Interface Selection Guide | |
| Effects of current on human beings and livestock - Part 1: General aspects | |
| eHRPD- EUTRAN Interworking Matrix Technical Report | |
| Electric Tachometer: Magnetic Drag (Indicator And Generator) | |
| Electrically Heated Pitot And Pitot-Static Tubes | |
| Electromagnetic compatibility (EMC) - Guide to the drafting of electromagnetic compatibility publications | |
| Electromagnetic compatibility (EMC) - Limits - Limits for current emissions in frequency band of over 2 kHz up to 9 kHz | |
| Electromagnetic compatibility (EMC) testing and measurement techniques for powerconditioners of Photovoltaic generating system | |
| Electronic Map Display Equipment For Graphical Depiction Of Aircraft Position (Own-Ship) | |
| Electrostatics - Part 2-2: Measurement methods - Measurement of chargeability | |
| Emergency Locator Transmitter (ELT) Equipment | |
| END FITTINGS FOR HOSE ASSEMBLIES METRIC | |
| Engine-Driven Direct Current Generators/Starter Generators | |
| Enhanced Bandwidth Performance over Laser-Based, Multimode Fiber Local Area Networks | |
| Enhanced Digital Access Communications System (EDACS) Digital Air Interface for: Channel Access, Modulation, Messages, and Formats | |
| Enhanced Digital Access Communications System (EDACS) Land Mobile Radio System Packet Data Specification | |
| Environmental Classification (MICE) Tutorial | |
| Evaluation method of endurance perfromance of metallic artificial hip stem using numerical simulation with finite element analysis | |
| Flexible Fuel and Oil Cell Material | |
| Flight Data Recorder Systems | |
| Flight Director Equipment | |
| FSK Air Interface Common Message Protocol Cross-Reference | |
| Fuel and Engine Oil System Hose Assemblies | |
| Fuel Drain Valves | |
| Fuel Flowmeter | |
| Fuel Flowmeters | |
| Fuel, Oil, And Hydraulic Pressure Instruments | |
| Gas Turbine Auxiliary Power Units | |
| General principles for the assessment and labeling of Carbon Footprint of Products | |
| Generic Workmanship Guidelines for Fiber Optic Connector Interoperability | |
| GREEN Study | |
| Guidance for Adhesive Usage in Fiber Optic Components | |
| Guide to the expression of uncertainty in measurement | |
| Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling Addendum 2: Power Delivery Over Balanced Single Twisted-Pair Cabling | |
| Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling- Addendum 1- use of 28 AWG cords | |
| Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling | |
| Guidelines for the Assessment and Mitigation of Installed Category 6 Cabling to Support 10GBASE-T | |
| Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests | |
| Guidelines for the Use of Installed Category 5e and Category 6 Cabling to Support 2.5GBASE-T and 5GBASE-T | |
| Guidelines on Shared Pathways and Shared Sheaths | |
| High Data Rate Multimode Fiber Transmission Techniques | |
| High Level Requirements for Common Air Interface for GEO-Mobile (Super-GEO) Satellite Communications Featuring Interoperation with Terrestrial GSM | |
| High Performance Structured Cabling Use Cases for Data Centers and Other Premises | |
| Human resource management \x97 Organizational culture metrics cluster | |
| Human resource management \x97 Succession planning metrics cluster | |
| Human resource management \x97 Workforce productivity metrics cluster | |
| Hydraulic Hose Assemblies | |
| ILS Glide Slope Receiving Equipment Operating within the Radio Frequency Range of 328.6 - 335.4 Megahertz (MHz) | |
| Individual Flotation Devices | |
| Information technology \x96 Artificial intelligence \x96 Assessment of machine learning classification performance | |
| Information technology \x96 Artificial intelligence \x96 Controllability of automated artificial intelligence systems | |
| Informative Test Methods (ITMs) for Fiber-Optic Fibers, Cables, Opto-Electronic Sources and Detectors, Sensors, Connecting and Terminating Devices, and Other Fiber-Optic Components | |
| Integrated Modular Avionics Hardware Elements | |
| International Implementation of Cellular Radiotelephone Systems Compliant with ANSI/EIA/TIA-553 | |
| International Implementation of Wireless Telecommunication Systems Compliant with TIA/EIA- 41 | |
| International Implementation of Wireless Telecommunication Systems Compliant with TIA/EIA-41 | |
| International Implementation of Wireless Telecommunications Systems Compliant with ANSI/TIA/EIA-41 | |
| International vocabulary of metrology - Basic and general concepts and associated terms (VIM) | |
| Interoperable Implementation Issues in IS-641 | |
| IP Network Architecture Model for cdma2000 Spread Spectrum Systems | |
| IP Network Reference Model for cdma2000 | |
| IS-41-B Mobile Border System Problems | |
| IS-41-B Support for Dual-Mode Wideband Spread Spectrum Mobile Stations | |
| IS-41-B Technical Notes | |
| IS-41-C Enhancements for PCS Multi-Band Support | |
| IS-54 Implementation Issues | |
| IS-680 Optional Modems | |
| IS-94 Enhancements and Issues | |
| ITM-1 Characteristics of Large Flaws in Optical Fibers by Dynamic Tensile Testing with Censoring | |
| ITM-12 Microbend Sensitivity Test Methods | |
| ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending | |
| ITM-2 Method of Measurement of Hydrogen Evolved from Coated Optical Fiber | |
| ITM-22 Continous Wave Method for Measuring the Raman Gain Efficiency of Single-Mode Fibers | |
| ITM-22 Continuous Wave Method for Measuring the Raman Gain Efficiency of Single-Mode Fibers | |
| ITM-23 Measurement of the Nonlinear Coefficient of Single-Mode Fibers | |
| ITM-24 Fiber Break Source Analysis | |
| ITM-3 Mode Power Distribution and Mode Transfer Function Measurement | |
| ITM-5 Characterization of Attenuation Uniformity of Optical Fiber | |
| ITM-6 Characterization of Mode Field Diameter and Cutoff Wavelength of Single-Mode Optical Fiber by OTDR | |
| ITM-7 Characterization of Fiber Strip Damage by Dynamic Tensile Testing | |
| ITM-9 Method for Evaluating Optical Fiber Ribbon Mechanical Strip Efficacy | |
| Land Mobile Linear Analog Modulation Communications Equipment Measurement and Performance Standards | |
| Launch Condition Guidelines for Measuring Attenuation of Installed Multimode Cabling | |
| Licensed PCS to PCS Interference | |
| Life Rafts (Twin Tube) | |
| Life Rafts | |
| Lineamientos Adicionales para Cableado Horizontal en Oficinas Abiertas | |
| Lineamientos para Cableado de Fibra Optica Centralizado | |
| Making method for the thin bone tissue samples for observation with optical microscope | |
| Manifold Pressure Instruments | |
| Measurement method of thermal efficiency for domestic gas and oil water heater under standard usage mode | |
| Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure | |
| Measurement of thermal conductivity of thin films on silicon substrates | |
| Measuring method of output power for CIS solar cells and modules | |
| Measuring methods of spectral response for CIS solar cells | |
| Mechanical structures for electronic equipment - Thermal management for cabinets with IEC 60297 (all parts) and JIS C 6010 (all parts) - Design guide: Method for the determination of forced... | |
| Mechanical/Functiona l Characteristics of the Interface between DCEs and Voiceband Analog Channels | |
| Mechanically-Generat ed Balanced Twisted-Pair Cable Impulse Noise Detection and Characterization | |
| Message Type Assignments for the Extended Protocol Facility of ANSI/EIA/TIA-553, EIA/TIA/IS-54, TIA/EIA/IS-88 and TIA/EIA/IS-95 | |
| Method for visualizing ultrasonic propagations with a generation laser scanning technique | |
| Method of positron annihilation lifetime measurements for characterizing holes in polymer materials | |
| MSC-BC Interface for Public 800 MHz | |
| Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate | |
| Nanotechnologies - Vocabulary - Part 1: Core terms | |
| Nanotechnologies - Vocabulary - Part 2: Nano-objects | |
| Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects | |
| Nanotechnologies-Occ upational risk management applied to engineered nanomaterials-Part 2: Use of the control banding approach | |
| Non-Rechargeable Lithium Cells And Batteries | |
| Optical Fiber Channel Polarity- Duplex-Single and Dual Row Fiber | |
| Optical Fiber Digital Transmission Systems Considerations for Users and Suppliers | |
| Overall Transmission Plan Aspects for Telephony in a Private Network | |
| Passenger Oxygen Mask Assembly, Continuous Flow | |
| Passive Airborne Global Navigation Satellite System (GNSS) Antenna | |
| PCN to PCN Intersystem Operations - IS-41 Based | |
| Personnel Parachute Assemblies And Components | |
| PIPELINES AND PIPE COUPLINGS FOR AIRCRAFT FLUID SYSTEMS (METRIC) | |
| Polycrystalline Materials - Determination of Residual Stresses by Neutron Diffraction | |
| POLYTETRAFLUOROETHYL ENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT | |
| Powerplant Fire Detection Instruments (Thermal and Flame Contact Types) | |
| Practical Considerations for Implementation of Encircled Flux Launch Conditions in the Field | |
| Pressure Instruments -- Fuel, Oil, And Hydraulic | |
| Private Land Mobile Radio Two-Way Mobile Equipment Radio Frequency (RF) Electromagnetic Exposure (EME) Test Report Guidelines | |
| Private Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines | |
| Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback | |
| Process for Sustainable Information Communications Technology Manufacturers | |
| Propeller Feathering Hose Assemblies (Rubber and Wire Braid Construction) | |
| Quality management - Customer satisfaction - Guidelines for monitoring and measuring | |
| Quality management - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations | |
| Radiowave Propagation \x96 Path Loss \x96 Measurement and Validation | |
| Radiowave Propagation- Path Loss- Measurement and Validation | |
| Railway applications - Procedure to determine the performance requirements for radio systems applied to radio-based train control systems | |
| Rechargeable Lithium Batteries And Battery Systems | |
| Recommendations for DTE Compatibility with EIA/TIA-578 DCEs and Corrections to Example Sessions | |
| Recommended Minimum Procedures for Validation of Authentication of IS-54-B Mobile Stations | |
| Recorder Independent Power Supply (RIPS) | |
| Recorder Independent Power Supply | |
| Recording holograms - Photopolymer - Methods for optical characteristic measurement | |
| Reference Guide for Fiber Optic Test Procedures | |
| Reliability of Passive Fiber Optic Components: Failure Modes and Mechanisms of Fiber Optic Connectors | |
| Report on EME Evaluation for RF Cabinet Emissions Under FCC MPE Guidelines | |
| Required Navigation Performance (RNP) Equipment Using Multi-Sensor Inputs | |
| Requirement of organization for supply chain system standards formulation and maintenance | |
| Rotorcraft, Transport Airplane, And Small Airplane Seating Systems | |
| Safety of children's clothing - Guidance on the use of cords and drawstrings on children's clothing | |
| Safety of machinery - Application of protective equipment to detect the presence of persons | |
| Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools | |
| Secondary reference CIS cells | |
| Services and Facilities Aspects of Digital European Cordless Telecommunications (DECT) | |
| Short Message Services for Wideband Spread Spectrum Systems | |
| Sideband Spectrum Measurement Procedure for Transmitters Intended for Use in the 220-222 MHz Band | |
| Single Phase 115 VAC, 400 Hz Arc Fault Circuit Breakers | |
| Smart Device Communications; Security Aspects | |
| Software engineering - Product quality - Part 2: External metrics | |
| Software engineering - Product quality - Part 3: Internal metrics | |
| Software engineering - Product quality - Part 4: Quality in use metrics | |
| Solar simulator for CIS solar cells and modules | |
| Stall Warning Instruments | |
| Stand-alone Airborne Navigation Equipment Using The Global Positioning System (GPS) Augmented By The Wide Area Augmentation System (WAAS) | |
| Stand-Alone Airborne Navigation Equipment Using The Global Positioning System Augmented By The Satellite Based Augmentation System (SBAS) | |
| Stand-Alone Airborne Navigation Equipment Using The Global Positioning System Augmented By The Satellite Based Augmentation System | |
| Static Discharge Between LAN and Data Terminal Equipment | |
| Static Electrical Power Inverter | |
| Structured Cabling Infrastructure Guidelines to Support Distributed Antenna Systems | |
| Study for CDMA-LTE Inter-Technology Spectrum Optimization | |
| Study for Machine-to-Machine (M2M) Communication for cdma2000 Networks | |
| Support for 14.4 kbps Data Rate and PCS Interaction for Wideband Spread Spectrum Cellular Systems | |
| Surface chemical analysis - Glow discharge mass spectrometry (GD-MS) - Introduction to use | |
| Survivor Locator Lights | |
| System and Standards Definition for a Digital Land Mobile Radio System | |
| Systems and software engineering \x96 Systems and software Quality Requirements and Evaluation (SQuaRE) \x96 Guidance for quality evaluation of artificial intelligence (AI) systems | |
| TAPERED TUBULAR STEEL STRUCTURES | |
| Technical Systems Bulletin Additional Cable Specifications for Unshielded Twisted Pair Cables | |
| Technical Topics: Rim Board and I-Joist Nail Spacing Recommendations | |
| Technical Topics: Wood Moisture Content and the Importance of Drying in Wood Building Systems | |
| Technical Topics: Wood Structural Panels Used as Nailable Sheathing | |
| Telecommunications - IP Telephony Infrastructures - IP Telephony Support for Emergency Calling Service | |
| Telecommunications - Multiline Terminal Systems - Comparison of PBX Transmission Requirements in Standards TIA-464-C and ETSI ES 201 168 Version 1.1 | |
| Telecommunications - Telephone Terminal Equipment \x96 Rationale and Measurement Guidelines for U.S. Network Protection Addendum 1 | |
| Telecommunications Cabling Guidelines for Wireless Access Points | |
| Telecommunications IP Telephony Infrastructures Synchronization in IP Networks- Methods and User Perception | |
| Telecommunications Service Priority (TSP) Industry Support Interface | |
| Telecommunications Telephone Terminal Equipment Guidelines for Marking and Labeling CPE Complying with TIA TR-41 Standards | |
| Telecommunications Telephone Terminal Equipment Guidelines for Marking and Labeling CPE Complying with TIA User Premises Equipment Standards | |
| Telecommunications Telephone Terminal Equipment Labeling Requirements | |
| Telecommunications Telephone Terminal Equipment Rationale and Measurement Guidelines For U.S. Network Protection-Addendum 1 | |
| Telecommunications Telephone Terminal Equipment Rationale and Measurement Guidelines for U.S. Network Protection-Addendum 2 | |
| Telecommunications Telephone Terminal Equipment Rationale and Measurement Guidelines for U.S. Network Protection-Addendum 3 | |
| Telecommunications Telephone Terminal Equipment Rationale and Measurement Guidelines for U.S. Network Protection-Addendum 4 | |
| Telecommunications Telephone Terminal Equipment Rationale and Measurement Guidelines For U.S. Network Protection | |
| Telephone Network Transmission Model for Evaluating Modem Performance | |
| Telephone Terminal Equipment Rationale and Measurement Guidelines for U.S. Network Protection | |
| Temperature coefficient measuring methods of output voltage and output current for CIS solar cells and modules | |
| Temperature Instruments | |
| Tensile Strength for Chemically Bonded Sand | |
| Tensile Tests for Discontinuously Reinforced Metal Matrix Composites at Ambient Temperatures | |
| Terrain Awareness And Warning System | |
| Terrestrial Land Mobile Radio \x96 Antenna Systems - Total \x93Antenna System\x94 Return Loss Measurements | |
| Terrestrial Land Mobile Radio \x96 Antenna Systems \x96 Total \x93Antenna System\x94 Return Loss Measurements | |
| Terrestrial Land Mobile Radio- Antenna Systems- Total \x93Antenna System\x94 Return Loss Measurements- Addendum 1 | |
| Terrestrial Land Mobile Radio-Antenna Systems-History and Technical Analysis of the Quarter Wave Monopole Over Finite Ground Plane as a Gain Standard | |
| Test methods of odor identification | |
| Test-Driven Java Development | |
| Testing method for crack growth resistance (R-curve) of fine ceramics | |
| Testing method of power generation efficiency for solid oxide fuel cell power systems fueled with gas in which methane is main component | |
| The Mechanical/ Functional Characteristics Between DCEs and Voiceband Analog Channels | |
| Thermal Spray Manual - A Practicle Reference Guide | |
| Thermal Spraying - Practice, Theory, and Application | |
| TIA/EIA-465-A and TIA/EIA-466-A Conformity Test Standard | |
| Tires | |
| Torso Restraint Systems | |
| Traffic Advisory System (TAS) Airborne Equipment | |
| Traffic Alert And Collision Avoidance System (TCAS) Airborne Equipment, TCAS II With Hybrid Surveillance | |
| Traffic Alert And Collision Avoidance System (TCAS) Airborne Equipment, TCAS II With Optional Hybrid Surveillance | |
| Traffic Alert and Collision Avoidance System (TCAS) Airborne Equipment, TCAS II | |
| Transmission Performance Specifications for Field Testing of Unshielded Twisted-Pair Cabling Systems | |
| Transport Airplane Wheels and Wheel and Brake Assemblies | |
| TREATMENT MILDEW RESISTANT FOR ROPE AND CORD | |
| TREATMENT, MILDEW RESISTANT FOR ROPE AND CORD | |
| Turn and Slip Instrument | |
| TWINE, COTTON, SEINE | |
| TWINE, COTTON, WRAPPING | |
| TWINE, COTTON: MATTRESS | |
| TWINE, FIBROUS, JUTE | |
| TWINE, LINEN | |
| Ultra Mobile Broadband Network Architecture Model | |
| Uniform Dialing Procedures in the Cellular Telecommunications Services | |
| Use of ANSI/EIA-232-D with 8-Position Modular Connector | |
| User Interface for Authentication Key Entry | |
| Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge | |
| Very High Frequency (VHF) Digital Link (VDL) Mode 2 Communications Equipment | |
| VHF Radio Communications Receiving Equipment Operating within the Radio Frequency Range 117.975 to 137.000 Megahertz | |
| VHF Radio Communications Transceiver Equipment Operating Within The Radio Frequency Range 117.975 To 137.000 Megahertz | |
| VHF Radio Communications Transmitting Equipment Operating within the Radio Frequency Range 117.975 to 137.000 Megahertz | |
| VOR Receiving Equipment Operating Within the Radio Frequency Range of 108 - 117.95 Megahertz (MHz) | |
| White light emitting diode devices for general lighting - Performance specifications | |
| Wideband Air Interface (WAI) Overview - Public Safety Wideband Data Standards Project - Digital Radio Technical Standards | |
| Wideband Data System Security Services \x96 Overview Public Safety \x96 Wideband Data Standards Project | |
| Wireless Communications Systems - Performance in Noise and Interference - Limited Situations - Recommended Methods for Technology - Independent Modeling, Simulation, and Verifications | |
| Wireless Communications Systems - Performance in Noise and Interference - Limited Situations - Recommended Methods for Techology - Independent Modeling, Simulation, and Verification - Addendum 1 | |
| Wireless Communications Systems - Performance in Noise and Interference - Limited Situations Part 2: Propagation and Noise | |
| Wireless Communications Systems - Performance in Noise and Interference-Limited Situations - Recommended Methods for Techology-Independen t Modeling, Simulation, and Verification | |
| Wireless Communications Systems - Performance in Noise and Interference-Limited Situations Part 1: Recommended Methods for Technology-Independe nt Narrowband Performance Modeling | |
| Wireless Communications Systems - Performance in Noise and InterferenceLimited Situations - Recommended Methods for Technology-Independe nt Modeling, Simulation, and Verification - Addendum 1 | |
| Wireless Communications Systems - Performance in Noise-and Interference-Limited - Situations Part 3: Recommended Methods for Technology-Independe nt Narrowband Performance Verification | |
| Wireless Communications Systems - Performance in Noise-and Interference-Limited Situations Part 3: Recommended Methods for Technology-Independe nt Narrowband Performance Verification | |
| Wireless Communications Systems Performance in Noise and Interference Limited Situations Part 2: Propagation and Noise | |
| Wireless Communications Systems Performance in Noise and Interference Limited Situations Part 3: Performance Verification, Addendum 1 | |
| Wireless Communications Systems Performance in Noise and Interference Limited Situations Part 3: Performance Verification | |
| Wireless Communications Systems Performance in Noise and Interference limited Situations Part 3: Recommended Methods for Technology Independent Performance Verification Addendum 1-Broadband-To-Narro wband Interface Scenarios | |
| Wireless Communications Systems Performance in Noise and Interference Limited Situations Part 4: Recommended Methods for Technology- Independent Broadband Performance Modeling | |
| Wireless Communications Systems Performance in Noise and Interference Limited Situations Part 5: Recommended Methods for Technology- Independent Broadband Performance Verification | |
| Wireless Communications Systems Performance in Noise and Interference- Limited Situations Part 1: Recommended Methods for Technology-Independe nt Narrowband Performance Modeling | |
| Wireless Communications Systems Performance in Noise and Interference- Limited Situations Part 2: Propagation and Noise | |
| Wireless Communications Systems Performance in Noise and Interference- Limited Situations Part 3: Recommended Methods for Technology-Independe nt Narrowband Performance Verification | |
| Wireless Communications Systems Performance in Noise and Interference-Limited Situations Part 1: Recommended Methods for Technology Independent Performance Modeling | |
| WIRELESS COMMUNICATIONS SYSTEMS PERFORMANCE IN NOISE AND INTERFERENCE-LIMITED SITUATIONS Part 2: Propagation and Noise | |
| Wireless Communications Systems Performance in Noise and Interference-Limited Situations Part 3: Recommended Methods for Technology Independent Performance Verification | |
| WIRELESS COMMUNICATIONS SYSTEMS PERFORMANCE IN NOISE-LIMITED SITUATIONS Part1: Recommended Methods for Technology Independent Performance Modeling | |
| Wireless Communications Systems-Performance in Noise and Interference-Limited Situations Part 2: Propagation & Noise |
| << Prev | Next >> |