Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1490
1500
1510
1520
1530
1540
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Active implantable medical devices -- Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers) | |
| Active implantable medical devices -- Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) | |
| Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems | |
| ACTIVE IMPLANTABLE MEDICAL DEVICES. PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER. | |
| Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content | |
| Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete | |
| Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures | |
| Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures | |
| Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test | |
| Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures | |
| Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing | |
| Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time | |
| Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete | |
| Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption | |
| Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content | |
| ADMIXTURES FOR CONCRETE, MORTAR AND GROUT. TEST METHODS. PART 6: INFRARED ANALYSIS. | |
| Aerospace series - Acceptance parameters of aesthetical variations for all visible equipment installed in aircraft cabins under all contractual variations (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2019.)... | |
| Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May... | |
| Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard (Endorsed by AENOR in December of 2005.) | |
| Aerospace series - Aluminium pigmented coatings - Coating methods (Endorsed by AENOR in September of 2009.) | |
| Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification (Endorsed by AENOR in October of 2010.) | |
| Aerospace series - Anodic electrodeposition of hexavalent chromium free primer (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2019.) | |
| Aerospace series - Anthropometric dimensioning of aircraft seats (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2019.) | |
| Aerospace series - Bolts with MJ threads, in titanium alloy TI-P64001 - Classification: 1100 MPa (at ambient temperature) - Technical specification (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), MoS2 coated - Classification: 1 550... | |
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at... | |
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class:100 MPa (at ambient temperature) (Endorsed by... | |
| Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/350 \xb0C (Endorsed by AENOR in... | |
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature) (Endorsed by AENOR in April... | |
| Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature) (Endorsed by AENOR... | |
| Aerospace series - Bonding straps for aircraft - Part 001: Technical specification (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief - Product standard... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90\xb0 , unsealed with clamp strain relief for EN... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90\xb0, unsealed with clamp strain relief - Product standard... | |
| Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard (Endorsed by... | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard (Endorsed by AENOR in April... | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 Ohms - Type WX - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 002: General (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohm, 200 \xb0C, type WZ - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohm, 200 \xb0C, type WM - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohms, 200 \xb0C, type WM - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial 50 \xbf, 200 \xb0C, type WN - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 \xb0C, type WN - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200\xb0C., Type WD - Product standard | |
| Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General (Endorsed by AENOR in December of 2012.) | |
| Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 003: AD family, Single, UV laser printable - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 004: ADA family, Single and multicore assembly - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage (Endorsed by AENOR in December of 2005.) | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) (Endorsed by AENOR in December of 2005.) | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 606: Wicking Test on Textile Braid Insulation (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2025.) | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 \xb0C and 135 \xb0C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 \xb0C and 135... | |
| Aerospace series - Cables, optical 125 \xb5m diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 \xb5m GI fibre nominal 2,74 mm, outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 \xb5m diameter cladding - Part 301: Tight structure 50/125 \xb5m GI fibre nominal 1,8 mm outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 \xb5m diameter cladding - Part 401: Tight structure bend insensitive 50 \xb5m/125 \xb5m GI fibre nominal, 1,8 mm outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 \xb5m outside diameter cladding - Part 102: Semi-loose 62,5/125 \xb5m GI fibre nominal 1,8 mm outside diameter - Product standard | |
| Aerospace series - Cables, optical, 125 \xb5m diameter cladding - Part 106: Semi-loose structure 62,5/125 \xb5m GI fibre nominal 0,9 mm outside diameter - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Cables, optical, 125 \xb5m diameter cladding - Part 201: Semi-loose structure 9/125 \xb5m SM fibre nominal 1,8 mm outside diameter - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Cables, optical, 125 \xb5m diameter cladding - Part 202: Semi-loose, ruggedized simplex construction 9/125 \xb5m SM fibre nominal 2,74 mm outside diameter - Product standard (Endorsed by... | |
| Aerospace series - Circuit breakers - Test methods - Part 100: General (Endorsed by AENOR in April of 2005.) | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification (Endorsed by AENOR in February of 2007.) | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification (Endorsed by AENOR in February of 2007.) | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification (Endorsed by AENOR in November of 2014.) | |
| Aerospace series - Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 blade terminal - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Aerospace series - Clamps, worm drive - Dimensions, masses (Endorsed by AENOR in March of 2007.) | |
| Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 026: Accessories for single module connector - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 004: Receptacle, jam-nut mounting - Product standard (Endorsed by AENOR in July... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 001: Technical specification (Endorsed by AENOR in June of... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 002: Specification of performance and contact arrangements (Endorsed by... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 001: Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2017.) | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 002: Specification of performance and contact arrangements (Endorsed by AENOR in July of 2007.) | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 002: Specification of performance and contact arrangements (Endorsed by AENOR in May of 2016.) | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard (Endorsed by... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 - Product standard (Endorsed by... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard (Endorsed by AENOR... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard (Endorsed by AENOR... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 -... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard (Endorsed by... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 -... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) - Product standard (Endorsed by... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 017: Blank chimney for accessory (1 per module cavity) - Product standard (Endorsed by AENOR... | |
| Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous - Part 024: Single module plug - Product standard (Endorsed by AENOR in June of 2011.) | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 \xb0C to 175 \xb0C - Part 001: Technical specification (Endorsed by... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 \xb0C to 175 \xb0C - Part 002: Specification of performance and... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 001: Technical specification (Endorsed by AENOR in November of 2007.) | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements (Endorsed by AENOR in November... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard (Endorsed by AENOR in November... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard (Endorsed by AENOR in November... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 005: Plug - Product standard (Endorsed by AENOR in November of 2007.)... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 \xb0C to 125... | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 003: Inserts - Product standard (Endorsed by AENOR... | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 004: Size 2 receptacle - Product standard (Endorsed... | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 006: Size 3 receptacle - Product standard (Endorsed... | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 007: Size 3 plug - Product standard (Endorsed... | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 009: Size 4 plug - Product standard (Endorsed... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical specification (Endorsed by AENOR in March of 2009.) | |
| Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard (Endorsed by AENOR in May of... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard (Endorsed by AENOR in July of... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard (Endorsed by AENOR in January of... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard (Endorsed by AENOR in March of... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard (Endorsed by AENOR in February of... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard (Endorsed by AENOR in July of... | |
| Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard (Endorsed by AENOR... | |
| Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 001: Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.)... | |
| Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 101: Multimode male termini size 16 - Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 102: Multimode female termini size 16 - Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 103: Multimode male termini size 12 - Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 104: Multimode female termini size 12 - Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General (Endorsed by AENOR in July of 2008.) | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2019.) | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2019.) | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods -Part 801: Fibre movement under compression (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in August of 2024.) | |
| Aerospace series - Filler metals for welding - Part 001: Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2024.) | |
| Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2024.) | |
| Aerospace series - Heat-shrinkable moulded shapes - Part 103: Fluoroelastomeric, temperature range -55 \xb0C to 200 \xb0C - Product standard (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2024.)... | |
| Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in March of 2017.) | |
| Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) | |
| Aerospace series - Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 \xb0C (Endorsed by AENOR... | |
| Aerospace series - Lockwire, drawn - Corrosion resisting steel (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2023.) | |
| Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules (Endorsed by AENOR in December of 2012.) | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 002: Specific rules for aluminium, aluminium alloys and magnesium alloys (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys (Endorsed by AENOR in December of 2012.)... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys (Endorsed by AENOR in December of... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels (Endorsed by AENOR in December of 2012.) | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 006: Specific rules for filler metals for brazing (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture (Endorsed by AENOR in April of 2011.) | |
| Aerospace series - Modular and Open Avionics Architectures - Part 002: Common Functional Modules (Endorsed by AENOR in April of 2011.) | |
| Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Netwo rk (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2019.) | |
| Aerospace series - Modular and open avionics architectures - Part 004: Packaging (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2019.) | |
| Aerospace series - Modular and Open Avionics Architectures - Part 005: Software (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2019.) | |
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), MoS2 coated - Classification: 1500 MPa (at ambient temperature)/425\xba C (Endorsed by AENOR in March... | |
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature)/600\xb0 C (Endorsed by... | |
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread - Classification: 1210 MPa (at ambient temperature) / 730\xb0C (Endorsed by AENOR... | |
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy TI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) /600\xb0C (Endorsed by AENOR in... | |
| Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 425\xb0C (Endorsed by AENOR in March of... | |
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 \xb0C - Technical specification... | |
| Aerospace series - O-rings in fluorosilicone rubber (FVMQ)- Hardness 80 IRHD (Endorsed by AENOR in March of 2003.) | |
| Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Qualification and approval of personnel for non-destructive testing (Endorsed by AENOR in September of 2006.) | |
| Aerospace series - Rod end, with self-aligning double row ball bearing and threaded shank in steel - Dimensions and loads, Inch series (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September... | |
| Aerospace series - Screws, 100\xb0 countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated - Classification: 900 MPa (at ambient temperature)/350 \xb0C (Endorsed by... | |
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 \xb0C (Endorsed by AENOR... | |
| Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1 100 MPa (at ambient temperature) /... | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 004: Sealing sleeves for external diameter cable 3 mm to 5,8 mm - Product standard (Endorsed by Asociaci\xf3n... | |
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600\xb0 C (Endorsed by AENOR in... | |
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30\xb0 swage - Classification: 1 210 MPa (at ambient temperature)/730 \xb0C (Endorsed by... | |
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread, for 60 swage - Classification: 1210 MPa (at ambient temperature)/730 \xb0C (Endorsed... | |
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600 \xb0C (Endorsed by... | |
| Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 002: Index of Product standards (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2024.) | |
| Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 204: Limited fire hazard identification sleeves - Operating Temperature range -40 \xb0C to 105 \xb0C - Product standard... | |
| Aerospace series - Standardized passenger seat weight information | |
| Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D = 250 mm - 500 MPa = Rm = 700 MPa... | |
| Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a = 50 mm - 500 MPa = Rm = 700 MPa | |
| Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a = 6 mm - 500 MPa = Rm = 700 MPa | |
| Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D = 300 mm | |
| Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De = 100 mm - 1 080 MPa = Rm = 1... | |
| Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a = 20 mm - 1 080 MPa = Rm =... | |
| Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm = a = 6 mm - 980 MPa = Rm... | |
| Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm = a = 6 mm - 1 080 MPa =... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa... | |
| Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D = 300 mm | |
| Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a = 6mm, 1 070 MPa = Rm = 1 220 MPa... | |
| Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a = 40 mm... | |
| Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a = 6 mm -... | |
| Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De = 200 mm - 900 MPa = Rm = 1 100... | |
| Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D = 300 mm | |
| Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts (Endorsed by AENOR in July of 2005.) | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 001: Technical specification (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2022.) | |
| Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes | |
| Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D < 110 mm (Endorsed by AENOR in November of 2009.) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip (Endorsed by AENOR in February of 2011.) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section (Endorsed by AENOR in February of 2011.) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube (Endorsed by AENOR in February of 2011.) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire (Endorsed by AENOR in February of 2011.) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock (Endorsed by AENOR in February of 2011.) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock (Endorsed by AENOR in February of 2011.) | |
| Aerospace series - Unmanned Aircraft Systems - Part 002: Direct Remote identification (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D = 250 mm... | |
| AEROSPACE SERIES. BEARING, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN STEEL. DIMENSIONS AND LOADS. (Endorsed by AENOR in June of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIR FRAME ROLLING, RIGID OR SELF-ALIGNING. TECHNICAL SPECIFICATION. (Endorsed by AENOR in April of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. DOUBLE ROW SELF-ALIGNING BALL BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 2. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. DOUBLE ROW SELF-ALIGNING BALL BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 2. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. DOUBLE ROW SELF-ALIGNING BALL BEARINGS IN STEEL. DIAMETER SERIES 2. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS. (Endorsed by AENOR in June of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATE. DIMENSIONS AND LOADS. (Endorsed by AENOR in June of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (Endorsed by AENOR in September... | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 8 AND 9. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (Endorsed by AENOR in September... | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL. DIAMETER SERIES 0 AND 2. NORMAL CLEARANCE CATEGORY. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.)... | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID SINGLE ROW BALL BEARINGS IN STEEL. DIAMETER SERIES 8 AND 9. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGINIG ROLLER BEARINGS IN CORROSION RESISTING STEEL. DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL, CADMIUM PLATED. DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL, CADMIUM PLATED. DIMENSIONS AND LOADS. (Endorsed by AENOR in June of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL. DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. (Endorsed by AENOR in September of 1994.) | |
| AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL. DIMENSIONS AND LOAD. (Endorsed by AENOR in June of 1994.) | |
| Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, n heat resisting nickel base alloy NI-P100HT (Inconnel 718). Classification: 1 550 MPa (at ambient temperature)/ 650\xbaC (Endorsed... | |
| Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification: 1 550 MPa (at ambient temperature)/ 650\xbaC (Endorsed by AENOR... | |
| Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1500 MPa (at ambient temperature)/650\xba C. Technical specifications (Endorsed by AENOR in March of 2003.)... | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 100: General (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 302: Voltage proof test (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 407: Flammability (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 501: Dynamic out- through (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 505: Tensile tests on conductors and strands (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 506: Plating continuity (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 507: Adherence of plating (Endorsed by AENOR in April of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 508: Plating thickness (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 603: Resistance to wet arc tracking (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 604: Resistance to dry arc propagation (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 605: Wet short circuit test (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 704: Flexibility (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 705: Contrast measurement (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Cables, electrical, aircraft use. Test methods. Part 802: Capacitance unbalance (Endorsed by AENOR in August of 2002.) | |
| AEROSPACE SERIES. CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A, SWITCHING CAPACITY 65 IN/1 00 A MAX. PART 001: TECHNICAL SPECIFICATION | |
| AEROSPACE SERIES. CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 2 A TO 25 A, SWITCHING CAPACITY 65IN. PART 004: UNC THREAD TERMINALS. PRODUCT STANDARD | |
| Aerospace series. Clamps, loop ("P" type) in aluminium alloy with rubber cushioning. Dimensions, masses (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning. Dimensions, masses. (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning. Dimensions, masses. (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA92HT (A286) (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA92HT (A286) (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Clips, spring tension, three parts. PTFE bushes (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Cushion, rubber for clamps. Dimensions, masses (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 301: Attenuation (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 510: Bending test (Endorsed by AENOR in August of 2002.) | |
| Aerospace series. Inserts, thickwall, self locking. Design standard (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Inserts, thickwall, self-locking, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH).Technical specification (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Inserts, thickwall, self-locking. Installation and removal procedure (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Nuts, bihexagonal, self locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature)/ 650\xbaC (Endorsed by AENOR in March of... | |
| Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature)/ 650\xbaC (Endorsed by AENOR in March... | |
| Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature)/425\xba C (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Nuts, clip, metric. Installation holes and assembly (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated. Classification: 1550 MPa (at ambient temperature)/425\xba C. Technical specification (Endorsed by AENOR in... | |
| Aerospace series. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA92HT (A286), MoS2 coated. Classification: 1 100 MPa (at ambient temperature)/425\xba C. Technical specification (Endorsed by AENOR in March of... | |
| Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification (Endorsed by AENOR in March of 2003.) | |
| AEROSPACE SERIES. PAINTS AND VARNISHES. CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED SODIUM CHLORIDE SOLUTION. | |
| Aerospace series. Pipe coupling 8\xba 30'. Thread - Geometric configurations (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe coupling 8\xba30' in titanium alloy. Elbow 45\xba, bulkhead (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe coupling 8\xba30' in titanium alloy. Elbows 90\xba with thrust wire nut (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe coupling 8\xba30' in titanium alloy. Elbows 90\xba, welded end with thrust wire nut (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe coupling 8\xba30' in titanium alloy. Thrust wire nut (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe coupling 8\xba30' in titatium alloy. Elbows 45\xba welded end with thrust wire nut (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe coupling 8\xba30'in titatium alloy. Elbows 45\xba (Endorsed by AENOR in December of 2001.) | |
| Aerospace series. Pipe couplings, loose flanges and seal. Flange connectors, welded in titanium alloy TI-P64001 (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Pipe couplings, loose flanges and seals. Flanges in fluorocarbon rubber and armature in aluminium alloy (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001 (Endorsed by AENOR in March of 2003.) | |
| Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubbe and armature in aluminium alloy. Technical specification (Endorsed by AENOR in March of 2003.) | |
| AEROSPACE SERIES. SCREWS, 100\xba COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 \xbaC. | |
| Aerospace series. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature)/ 650\xbaC (Endorsed by AENOR in March of 2003.)... | |
| Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature)/ 650\xbaC (Endorsed by AENOR in March of... | |
| AEROSPACE SERIES. TEST METHODS FOR PAINTS AND VARNISHES. FILIFORM CORROSION RESISTANCE TEST ON ALUMINIUM ALLOYS. | |
| AEROSPACE SEROES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN CORROSION RESISTING STEEL. DIMENSIONS AND LOADS. (Endorsed by AENOR in June of 1994.) | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products | |
| ATTESTATION STANDARD FOR THE ASSESSMENT OF CONTRACT AWARD PROCEDURES OF ENTITIES OPERATING IN THE WATER, ENERGY, TRANSPORT AND TELECOMMUNICATION SECTORS. | |
| Building lime - Part 1: Definitions, specifications and conformity criteria | |
| Building lime - Part 2: Test methods | |
| Building lime - Part 3: Conformity evaluation | |
| Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993) | |
| District heating pipes - Bonded single pipe systems for directly buried hot water networks - Part 1: Factory made steel shut-off valve assembly for steel service pipes, polyurethane thermal insulation... | |
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene | |
| Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood | |
| Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe | |
| Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention. | |
| Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood | |
| Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials | |
| Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products | |
| DURABILITY OF WOOD AND WOOD-BASED PRODUCTS. PRESERVATIVE-TREATED SOLID WOOD. PART 1: CLASSIFICATION OF PRESERVATIVE PENETRATION AND RETENTIOn. | |
| Earth-moving machinery - Safety - Part 1: General requirements | |
| EARTH-MOVING MACHINERY. SAFETY. PART 1: GENERAL REQUIREMENTS. | |
| Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards | |
| Fibreboards - Determination of surface absorption - Part 2: Test method for hardboards | |
| Fly ash for concrete - Part 1: Definition, specifications and conformity criteria | |
| GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR. | |
| Gas pressure regulators for inlet pressures up to 100 bar | |
| General requirements for components used in drains and sewers | |
| Glass in building - Determination of luminous and solar characteristics of glazing | |
| Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance | |
| Grout for prestressing tendons - Grouting procedures | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 8-1: CONTROL AND INSTRUMENTATION. | |
| Hearing protectors - General requirements - Part 1: Ear-Muffs | |
| Hearing protectors - General requirements - Part 2: Ear-plugs | |
| Hearing protectors - General requirements - Part 2: Earplugs (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet | |
| Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document | |
| Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in March of 2021.) | |
| Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2024.) | |
| Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio input (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2024.) | |
| Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2024.) | |
| Hearing protectors - Safety requirements - Part 9: Earplugs with safety-related audio input (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in March of 2021.) | |
| Hearing protectors - Safety requirements - Part 9: Earplugs with safety-related audio input (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2024.) | |
| Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs. | |
| Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs | |
| Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs | |
| Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input | |
| Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs | |
| Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs | |
| Heating boilers - Test code for heating boilers for atomizing oil burners | |
| Heating boilers. Test code for heating boilers for atomizing oil burners. | |
| Helmets for fire fighting in buildings and other structures (Endorsed by AENOR in September of 2008.) | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to... | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater. | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for... | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater | |
| High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates | |
| High-visibility warning clothing for professional use - Test methods and requirements (Endorsed by AENOR in September of 2008.) | |
| Industrial protective helmets (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2025.) | |
| Industrial protective helmets (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Industrial safety helmets (Endorsed by AENOR in December of 2012.) | |
| LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MECHANICAL INTERFACES. (ISO 11253:1993). | |
| Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads | |
| Lighting columns - Part 3-2: Design and verification - Verification by testing | |
| Lighting columns - Part 3-3: Design and verification - Verification by calculation | |
| Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns | |
| Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions | |
| LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES. | |
| Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes | |
| MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS. | |
| Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings | |
| Masonry cement - Part 1: Composition, specifications and conformity criteria | |
| Masonry cement - Part 2: Test methods | |
| Medical gloves for single use - Part 1: Requirements and testing for freedom from holes | |
| Medical gloves for single use - Part 1: Requirements and testing for freedom of holes | |
| Medical gloves for single use - Part 2: Requirements and testing for physical properties | |
| Medical gloves for single use - Part 4: Requirements and testing for shelf life determination | |
| MEDICAL GLOVES FOR SINGLE USE. PART 1: REQUIREMENTS AND TESTING FOR FREEDOM FROM HOLES. | |
| MEDICAL GLOVES FOR SINGLE USE. PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES. (INCLUDING CORRIGENDUM 1996). | |
| MEDICAL GLOVES FOR SINGLE USE. PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES. | |
| MEDICAL GLOVES FOR SINGLE USE. PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION. | |
| Method of testing fly ash - Part 1: Determination of free calcium oxide content | |
| METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS. | |
| Metrological aspects of non-automatic weighing instruments | |
| Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy | |
| Packaging machines safety - Part 2: Pre-formed rigid container packaging machines | |
| Particleboards - Definition and classification (Endorsed by AENOR in September of 2006.) | |
| Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws | |
| Particleboards and fibreboards - Determination of swelling in thickness after immersion in water | |
| Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board | |
| PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS. | |
| Personal eye-protection - Automatic welding filters | |
| Personal fall protection equipment - Descender devices for rescue (Endorsed by AENOR in November of 2011.) | |
| Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line (Endorsed by Asociaci\xf3n Espa\xf1ola de... | |
| Personal fall protection equipment - Lanyards | |
| Personal fall protection equipment - Personal fall protection systems | |
| Personal protective equipment against falls from a height - Connectors | |
| Personal protective equipment against falls from a height - Energy absorbers. | |
| Personal protective equipment against falls from a height - Full body harnesses. | |
| Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging | |
| Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line. | |
| Personal protective equipment against falls from a height - Retractable type fall arresters. | |
| Personal protective equipment against falls from a height - Test methods | |
| PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT. TEST METHODS. | |
| Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards | |
| Plywood - Bonding quality - Part 1: Test methods | |
| Plywood - Bonding quality - Part 2: Requirements | |
| Pressure gauges - Vocabulary | |
| Protection profiles for secure signature creation device - Part 1: Overview | |
| Protection profiles for secure signature creation device - Part 2: Device with key generation | |
| Protection profiles for secure signature creation device - Part 3: Device with key import | |
| Protection profiles for secure signature creation device - Part 4: Extension for device with key generation and trusted channel to certificate generation application | |
| Protective clothing - Ensembles and garments for protection against cold | |
| Protective clothing - Protection against heat and fire - Method of determining heat transmission on exposure to flame | |
| Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) | |
| Protective clothing - Protection against rain | |
| Protective clothing - Test method: Determination of behaviour of materials on impact of small splashes of molten metal | |
| Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2020.) | |
| Protective clothing for firefighters - Performance requirements for protective clothing for firefighting | |
| Protective clothing for users of hand-held chain saws - Part 2: Test methods for leg protectors | |
| Protective clothing for users of hand-held chain saws - Part 5: Requirements for leg protectors | |
| Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters | |
| Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters | |
| Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear | |
| Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors | |
| Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors | |
| Protective clothing for users of hand-held chainsaws - Part 1: Test rig for testing resistance to cutting by a chainsaw | |
| PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 4: TEST METHODS FOR CHAINSAW PROTECTIVE GLOVES | |
| Protective gloves - General requirements and test methods | |
| Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements | |
| Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration | |
| Protective gloves against ionizing radiation and radioactive contamination | |
| Protective gloves against mechanical risks (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April of 2019.) | |
| Protective gloves against mechanical risks | |
| Protective gloves against thermal risks (heat and/or fire) | |
| RADIATORS AND CONVECTORS. PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS. | |
| Radiators and convectors. Part 3: Evaluation of conformity. | |
| Railway applications - Fire protection on railway vehicles - Part 1: General | |
| Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components | |
| Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components | |
| Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers | |
| Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design | |
| Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems | |
| Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection | |
| Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery | |
| Resilient and laminate floor coverings - Castor chair test | |
| Resilient floor coverings - Determination of shear force | |
| Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg | |
| Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking | |
| Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking | |
| Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly | |
| Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking | |
| Risk management - Risk assessment techniques | |
| Rotorcraft - Emergency Breathing Systems (EBS) - Requirements, testing and marking (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2019.) | |
| Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | |
| SAFETY OF MACHINERY. RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS. | |
| Safety of packaging machines - Part 10: General Requirements | |
| Safety of packaging machines - Part 6: Pallet wrapping machines | |
| Safety of packaging machines - Part 8: Strapping machines | |
| SARTH-MOVING MACHINERY. SAFETY. PART 1: GENERAL REQUIREMENTS. | |
| Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety | |
| Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy | |
| Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) | |
| Specification for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW | |
| Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use | |
| Structural timber - Determination of characteristic values of mechanical properties and density | |
| Structural timber - Sizes, permitted deviations | |
| Structural timber - Strength classes | |
| Test gases - Test pressures - Appliance categories | |
| Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties | |
| Timber structures - Test methods - General principles for static load testing | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 \xb0C - Test method | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass | |
| Wood based panels - Determination of dimensional changes associated with changes in relative humidity. | |
| Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) (Endorsed by AENOR in August of 2006.) | |
| Wood preservatives - Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer) | |
| Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) | |
| Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) | |
| Wood preservatives - Determination of the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground contact - Field test: L-joint method | |
| Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) | |
| Wood-based panels - Determination of density | |
| Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length | |
| Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness | |
| Wood-based panels - Determination of dimensions of test pieces | |
| Wood-based panels - Determination of modulus of elasticity in bending and of bending strength | |
| Wood-based panels - Determination of moisture content | |
| Wood-based panels - Determination of moisture resistance under cyclic test conditions. | |
| Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results | |
| Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control | |
| Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels | |
| Wood-based panels - Surface soundness - Test method. | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours -- Part 4: Guide for selection, installation, use and maintenance. | |
| Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Part 1: General requirements and test methods. | |
| WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS IN THE... | |
| WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS WELL ABOVE... | |
| Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents | |
| Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements |
| << Prev | Next >> |