Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1500
1510
1520
1530
1540
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Aerospace Series - Commercial aircraft passenger seats - Reliability testing (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2024.) | |
| Aerospace series - ECO efficiency of seats (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Aerospace series - Embedded tags - Choice of fixation for installation, removal and replacement of embedded tags (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Aerospace series - Hexavalent chromium free chemical conversion process of magnesium and magnesium alloys (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Aerospace series - Passive UHF RFID for airborne use (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Aerospace series - Rotorcraft life raft - Requirements, testing and marking (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2024.) | |
| Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm <= a <= 50 mm - 900 MPa <= Rm <=... | |
| Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm = a = 50 mm - 900 MPa = Rm =... | |
| Alarm systems - Access control systems for use in security applications - Part 1: System requirements | |
| Alarm systems - Access control systems for use in security applications - Part 2-1: General requirements for components | |
| Alarm systems - Access control systems for use in security applications - Part 7: Application guidelines | |
| Alarm systems - Alarm transmission systems and equipment - Part 2-1: General requirements for alarm transmission equipment | |
| Alarm systems - Alarm transmission systems and equipment - Part 2-2: Requirements for equipment used in systems using dedicated alarm paths | |
| Alarm systems - Alarm transmission systems and equipment - Part 2-3: Requirements for equipment used in systems with digital communicators using the public switched telephone network | |
| Alarm systems - Alarm transmission systems and equipment - Part 2-4: Requirements for equipment used in systems with voice communicators using the public switched telephone network | |
| Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April of 2023.) | |
| Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT) | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5-3: Video transmission - Analogue and digital video transmission | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5: Video transmission | |
| Alarm systems - CCTV surveillance systems for use in security applications -- Part 4-1: Black and white monitors. | |
| Alarm systems - CCTV surveillance systems for use in security applications -- Part 7: Application guidelines | |
| Alarm systems - Combined and integrated alarm systems - Part 1: General requirements | |
| Alarm systems - Intrusion and hold-up systems - Part 1: System requirements | |
| Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors | |
| Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies | |
| Alarm systems - Intrusion and hold-up systems -- Part 1: System requirements | |
| Alarm systems - Intrusion and hold-up systems -- Part 2-3: Requirements for microwave detectors | |
| Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques | |
| Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems | |
| Alarm systems - Social alarm systems - Part 2: Trigger devices | |
| Alarm systems - Social alarm systems - Part 7: Application guidelines | |
| Alarm systems - Social alarm systems -- Part 1: System requirements (Endorsed by AENOR in August of 2002.) | |
| ALARM SYSTEMS. ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 1: SYSTEM REQUIREMENTS. | |
| ALARM SYSTEMS. CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 2-1: BLANCK AND WHITE CAMERAS. | |
| ALARM SYSTEMS. CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 7: APPLICATION GUIDELINES. | |
| Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offend er programs (Endorsed by AENOR in March of 2014.) | |
| Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2017.) | |
| ANECHOIC CHAMBERS. PART 1: SHIELD ATTENUATION MEASUREMENT. | |
| ANECHOIC CHAMBERS. PART 2: ALTERNATIVE TEST SITE SUITABILITY WITH RESPECT TO SITE ATTENUATION. | |
| Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment | |
| Automatic electrostatic application equipment for flammable flock material. | |
| Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz) (Endorsed by AENOR in October of 2006.) | |
| Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers. | |
| Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings | |
| Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components | |
| Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations | |
| Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers \x96 Part 1: General requirements for bushings | |
| Bushings for transformers and reactor cable boxes not exceeding 36 kV | |
| Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers | |
| Cable glands for electrical installations (Endorsed by AENOR in May of 2006.) | |
| Cable glands for electrical installations | |
| Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks | |
| Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings | |
| Cable trunking systems and cable ducting systems for electrical installations -- Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations -- Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings | |
| Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear | |
| Central power supply systems. | |
| Central safety power supply systems | |
| CHARACTERISTICS OF DAB RECEIVERS (Endorsed by AENOR in July of 1998.) | |
| Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000... | |
| COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS. PART 3: SECTIONAL SPECIFICATION FOR OUTDOOR DROP CABLES. | |
| COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS. PART 4: SECTIONAL SPECIFICATION FOR DISTRIBUTION AND TRUNK CABLES. | |
| COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS. PART 5: SECTIONAL SPECIFICATION FOR INDOOR DROP CABLES FOR USE IN NETWORKS OPERATING AT FREQUENCIES BETWEEN 5 MHZ AND 2150 MHZ. | |
| COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS. PART 6: SECTIONAL SPECIFICATION FOR OUTDOOR DROP CABLES FOR USE IN NETWORKS OPERATING AT FREQUENCIES BETWEEN 5 MHZ AND 2 150 MHZ. | |
| CODE OF PRACTICE FOR THE SAFE USE OF FULLY ENCLOSED ASKAREL-FILLED ELECTRICAL EQUIPMENT. | |
| CODE OF PRACTICE FOR THE SAFE USE OF FULLY ENCLOSED OIL-FILLED ELECTRICAL EQUIPMENT WICH MAY BE CONTAMINATED WITH PCBS. | |
| Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results | |
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-1: Procedures - Category A F/R. | |
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-4: Procedures - Category C. | |
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen... | |
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of... | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS. PART 1: APPARATUS. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS. PART 2: PROCEDURE. | |
| COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS. TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE. PART 2: PROCEDURES. 1 KW PRE-MIXED FLAME. | |
| Communication cables - Part 2-20: Common design rules and construction - General | |
| Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds | |
| Communication cables - Part 2-23: Common design rules and construction - PE insulation | |
| Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds | |
| Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds | |
| Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables | |
| Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) | |
| Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound | |
| Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound | |
| Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables | |
| Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables | |
| Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects | |
| Communication cables - Part 4-2: General considerations for the use of cables - Guide to use | |
| Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss | |
| Communication cables - Specifications for test methods - Part 1-16: Electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions) | |
| Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT | |
| Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements | |
| Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation | |
| Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) | |
| Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings | |
| Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditions | |
| Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable | |
| Communication cables - Specifications for test methods -- Part 1-12: Electrical test methods - Inductance (Endorsed by AENOR in July of 2009.) | |
| Communication cables - Specifications for test methods -- Part 1-2: Electrical test methods - DC resistance. | |
| Communication cables - Specifications for test methods -- Part 4-11: Environmental test methods - A horizontal integrated fire test method (Endorsed by AENOR in February of 2003.) | |
| Communication cables - Specifications for test methods -- Part 4-12: Environmental test methods - Vertical flame spread test on bunched small communication cables (Endorsed by AENOR in July of 2009.)... | |
| Communication cables - Specifications for tests methods -- Part 3-10: Mechanical test methods - Torsion and twisting (Endorsed by AENOR in July of 2009.) | |
| Communication cables -- Part 1-2: Definitions (Endorsed by AENOR in July of 2009.) | |
| Communication cables -- Part 2-1: Common design rules and construction (Endorsed by AENOR in July of 2009.) | |
| Communication cables -- Part 2-21: Common design rules and construction - PVC insulation compounds. | |
| Communication cables -- Part 2-21: Common design rules and construction - PVC insulation compounds | |
| Communication cables -- Part 2-22: Common design rules and construction - PVC sheathing compounds. | |
| Compact Equipment Assembly for Distribution Substations (CEADS) | |
| Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications | |
| Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods | |
| CONCRETE ROOFING TILES AND FITTINGS. PRODUCT SPECIFICATIONS. | |
| Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS) | |
| Conductors for overhead lines - Characteristics of greases | |
| Conductors for overhead lines - Round wire concentric lay stranded conductors. | |
| Conductors for overhead lines - Round wire concentric lay stranded conductors | |
| Conduit systems for cable management. Part 1: General requirements. | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-3: Type SC/APC simplex 9\xb0 terminated on EN 60793-2-50 of type B-652.D... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 10-1: Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre (Endorsed... | |
| Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications -- Part 3-1: Type SG terminated on IEC 60793-2 category A1a and A1b multimode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 6-2: Type SC-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre (Endorsed... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 7-4: LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre (Endorsed... | |
| Connectors for photovoltaic systems - Safety requirements and tests | |
| CONNECTORS FOR THERMOELECTRIC SENSORS. | |
| Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 1: Covered conductors | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 3: Guide to use | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors -... | |
| Data sheet and name plate for photovoltaic inverters | |
| Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code). | |
| DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE) | |
| Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site (Endorsed by AENOR in February of 2009.) | |
| District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Part 2: Factory made steel service valve assembly for steel service... | |
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene | |
| Earthing of power installations exceeding 1 kV a.c. | |
| Efficiency of domestic electrical storage water heaters and testing methods | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) -- Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric... | |
| ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE. METHODS OF MEASURING THE PERFORMANCE. | |
| Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance | |
| Electric dishwashers for household use - Methods for measuring the performance | |
| Electric dishwashers for household use - Test methods for measuring the performance. | |
| Electric dishwashers for household use - Test methods for measuring the performance | |
| Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements | |
| Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters | |
| Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency | |
| Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment | |
| ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP. | |
| Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies | |
| Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems | |
| Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises - Guide on the selection, installation, use and maintenance. | |
| Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance | |
| Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises -... | |
| Electrical apparatus for the detection of combustible gases in domestic premises -- Part 1: Test methods and performance requirements | |
| Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust | |
| Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation | |
| Electrically insulating helmets for use on low voltage installations. | |
| Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C) | |
| Electricity metering equipment - Part 4: Particular requirements - Static meters for DC active energy (class indexes A, B and C) | |
| Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles | |
| Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1: Emission | |
| Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity | |
| Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen | |
| ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS. | |
| Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials | |
| Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder | |
| Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock | |
| Emergency escape lighting systems | |
| Energy efficiency of electric lamps for household use - Measurement methods | |
| Fibre cement slates and fittings - Product specification and test methods | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 3-2: Singlemode mechanical fibre splice (Endorsed by AENOR in October of 2011.) | |
| Fibre-cement profiled sheets and fittings - Product specification and test methods | |
| Fibre-cement slates and fittings - Product specification and test methods | |
| FIBRE-CEMENT SLATES AND THEIR FITTINGS FOR ROOFING. PRODUCT SPECIFICATION AND TEST METHODS. | |
| FIBRE-CEMENT SLATES AND THEIR FITTINGS FOR ROOFING. PRODUCT SPECIFICATION AND TEST METHODS | |
| Flat polyvinyl chloride sheathed flexible cables | |
| FLEXIBLE CABLES FOR LIFTS. | |
| Gas appliances - Fuel cell gas heating appliance - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW | |
| Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 11: Smart Metering - Application Specifications - Simple External Consumer Display | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer - Part... | |
| Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust. | |
| GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY. | |
| HIGH EFFICIENCY COMMUNICATION SUBSYSTEM FOR SMALL DATA PACKAGES (Endorsed by AENOR in April of 1999.) | |
| High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures | |
| Home and Building Electronic Systems (HBES) - Part 4-4: HBES IoT Point API (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2025.) | |
| Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products | |
| Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair | |
| Home and Building Electronic Systems (HBES)- Part 6-2 IoT Semantic Ontology model description (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2022.) | |
| HOME AND BUILDING ELECTRONIC SYSTEMS (HBES). PART 3-2: ASPECTS OF APPLICATION. USER PROCESS. (Endorsed by AENOR in July of 1996.) | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces -- Part 1: General requirements (Endorsed by AENOR in December of 2001.) | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces -- Part 2: DeviceNet (Endorsed by AENOR in December of 2001.) | |
| Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings | |
| Information technology - Generic cabling systems - Part 10: Single pair cabling (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in August of 2025.) | |
| Information technology - Generic cabling systems - Part 4: Homes (Endorsed by AENOR in January of 2013.) | |
| Information technology - Generic cabling systems - Part 4: Homes (Endorsed by AENOR in June of 2016.) | |
| Information technology - Generic cabling systems - Part 4: Homes | |
| Information technology - Generic cabling systems - Part 5: Data centre spaces (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2018.) | |
| Information technology - Generic cabling systems -- Part 1: General requirements and office areas (Endorsed by AENOR in January of 2004.) | |
| INFORMATION TECHNOLOGY EQUIPMENT. ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION. (Endorsed by AENOR in December of 1996.) | |
| Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV | |
| Insulating ladders for use on or near low voltage electrical installations | |
| Lead acid starter batteries - Part 7: General requirements and methods of tests for motorcycle batteries | |
| Lead-acid starter batteries - Part 1: General requirements and methods of test | |
| Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals | |
| Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles | |
| Lead-acid starter batteries - Part 6: Batteries for Micro-Cycle Applications | |
| Lead-acid starter batteries -- Part 3: Terminal system for batteries with 36 V nominal voltage | |
| Lead-acid starter batteries -- Part 5: Properties of battery housings and handles | |
| Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes | |
| Live working - Footwear for electrical protection - Insulating footwear and overboots | |
| LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. IDENTIFICATION OF CONNECTIONS. | |
| LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. MOUNTING RAILS. TOP HAT RAILS, 15 MM WIDE FOR THE FIXING OF TERMINAL BLOCKS. | |
| Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications | |
| Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts. | |
| Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts | |
| Low-voltage switchgear and controlgear for industrial use - Control switches - Position switches 30 x 55 - Dimensions and characteristics | |
| Low-voltage switchgear and controlgear for industrial use - Control switches - Position switches 42,5 x 80 - Dimensions and characteristics | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM A, FOR ALTERNATING CURRENT, 2 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM A, FOR DIRECT CURRENT, 2 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM C, FOR ALTERNATING CURRENT, 2 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM C, FOR DIRECT CURRENT, 3 OR 4 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM D, FOR ALTERNATING CURRENT, 2 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM D, FOR DIRECT CURRENT, 3 OR 4 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. METHODS FOR MEASURING THE OPERATING DISTANCE AND OPERATING FREQUENCY. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES.FORM A, FOR DIRECT CURRENT, 3 OR 4 TERMINALS. | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. SIZE NUMBERS AND GAUGES FOR FLAT CONNECTIONS. | |
| Marking and documentation requirements for Photovoltaic Modules | |
| Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) | |
| Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure | |
| MEASUREMENT, CONTROL, REGULATION. ELECTRICAL TEMPERATURE SENSORS. ISOLATING TUBES FOR THERMOCOUPLES. (Endorsed by AENOR in April of 1996.) | |
| MEASUREMENT, CONTROL, REGULATION. ELECTRICAL TEMPERATURE SENSORS. METAL PROTECTING TUBES FOR TC ASSEMBLIES. (Endorsed by AENOR in April of 1996.) | |
| Method of test for resistance to fire of unprotected small cables for use in emergency circuits | |
| Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles | |
| Monitoring and alarm receiving centre - Part 1: Location and construction requirements | |
| Monitoring and alarm receiving centre - Part 2: Technical requirements | |
| Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation | |
| Monitoring and Alarm Receiving Centre | |
| Multi-element metallic cables used in analogue and digital communication and control -- Part 7: Sectional specification for instrumentation and control cables (Endorsed by AENOR in July of 2009.) | |
| Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal... | |
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations | |
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations | |
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV | |
| OPERATION OF ELECTRICAL INSTALLATIONS (NATIONAL ANNEXES). | |
| OPERATION OF ELECTRICAL INSTALLATIONS. | |
| Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers | |
| Overall efficiency of grid connected photovoltaic inverters | |
| Overhead electrical lines exceeding AC 1 kV - Part -2-7: National Normative Aspects (NNA) for FINLAND (based on EN 50341-1:2012) (Endorsed by AENOR in October of 2015.) | |
| Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications | |
| Overhead electrical lines exceeding AC 1 kV - Part 2-12: National Normative Aspects (NNA) for ICELAND (based on EN 50341-1:2012) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2019.)... | |
| Overhead electrical lines exceeding AC 1 kV - Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 50341-1:2012) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2019.)... | |
| Overhead electrical lines exceeding AC 1 kV - Part 2-24: National Normative Aspects (NNA) for Romania (based on EN 50341-1:2012) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April of 2019.)... | |
| Overhead electrical lines exceeding AC 1 kV - Part 2-6: National Normative Aspects (NNA) for SPAIN (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 1: General requirements - Common specifications | |
| Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 2: Index of National Normative Aspects | |
| Overhead electrical lines exceeding AC 45 kV - Part 1: General requirements - Common specifications | |
| Overhead electrical lines exceeding AC 45 kV - Part 2: Index of National Normative Aspects | |
| Overhead electrical lines exceeding AC 45 kV -- Part 2: Index of National Normative Aspects | |
| Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers | |
| Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers | |
| Power transformer and reactor fittings - Part 11: Oil and winding temperature indicators | |
| Power transformer and reactor fittings - Part 12: Fans | |
| Power transformer and reactor fittings - Part 1: General | |
| Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator | |
| Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion | |
| Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) | |
| Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers | |
| Power transformer and reactor fittings - Part 6: Cooling equipment - Removable radiators for oil-immersed transformers | |
| Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil | |
| Power transformer and reactor fittings - Part 8: Butterfly valves for insulating liquid circuits | |
| Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers | |
| Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 1: General (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of... | |
| Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general... | |
| Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID)... | |
| Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz). | |
| Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) | |
| Protection against corrosion by stray current from direct current systems | |
| Protection against lightning - Thunderstorm warning systems | |
| Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide | |
| Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling | |
| Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems | |
| Railway applications - Current collection systems - Pantographs, testing methods for carbon contact strips | |
| Railway applications - Current collection systems - Pantographs, testing methods for contact strips | |
| Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) | |
| Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April of 2022.)... | |
| Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2019.)... | |
| Railway applications - Electromagnetic compatibility - Part 1: General | |
| Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world | |
| Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle | |
| Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus | |
| Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Railway applications - Electronic equipment used on rolling stock | |
| Railway applications - Energy measurement on board trains - Part 1: General | |
| Railway applications - Energy measurement on board trains - Part 2: Energy measuring | |
| Railway applications - Energy measurement on board trains - Part 3: Data handling | |
| Railway applications - Energy measurement on board trains - Part 4: Communication | |
| Railway applications - Energy measurement on board trains - Part 5: Conformity assessment | |
| Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock | |
| Railway applications - Environmental conditions for equipment -- Part 1: Equipment on board rolling stock | |
| Railway applications - Environmental conditions for equipment -- Part 3: Equipment for signalling and telecommunications | |
| Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters | |
| Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices | |
| Railway applications - Fixed installations - D.C. switchgear - Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches | |
| Railway applications - Fixed installations - D.C. switchgear - Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches | |
| Railway applications - Fixed installations - D.C. switchgear - Part 6: D.C. switchgear assemblies | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 1: General | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 2: D.C. circuit breakers | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems. | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 6: D.C. switchgear assemblies | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current... | |
| Railway applications - Fixed installations - D.C. switchgear -- Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage... | |
| Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires | |
| Railway applications - Fixed installations - Electric traction - Special requirements for composite insulators | |
| Railway applications - Fixed installations - Electric traction overhead contact lines. | |
| Railway applications - Fixed installations - Electric traction overhead contact lines | |
| Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock | |
| Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems | |
| Railway applications - Fixed installations - Electronic power converters for substations | |
| Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups | |
| Railway applications - Fixed installations - Harmonization of the rated values for converter groups and tests on converter groups | |
| Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices | |
| Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers | |
| Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers | |
| Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV | |
| Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV | |
| Railway applications - Fixed installations -- Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems. | |
| Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability - Part 1: General... | |
| Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment | |
| Railway applications - Insulation coordination - Part 2: Overvoltages and related protection | |
| Railway applications - Insulation coordination -- Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment | |
| Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability | |
| Railway applications - Radio remote control system of traction vehicle for freight traffic. | |
| Railway applications - Radio remote control system of traction vehicle for freight traffic | |
| Railway applications - Railway rolling stock cables having special fire performance - Standard wall -- Part 1: General requirements (Endorsed by AENOR in January of 2003.) | |
| Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 2-1: Cables with crosslinked elastomeric insulation - Single core cables (Endorsed by AENOR in... | |
| Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 2-2: Cables with crosslinked elastomeric insulation - Multicore cables (Endorsed by AENOR in August... | |
| Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables (Endorsed... | |
| Railway applications - Railway rolling stock power and control cables having special fire performance -- Part 3-2: Cables with crosslinked elastomeric insulation with reduced dimensions - Multicore cables (Endorsed by... | |
| Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems | |
| Railway applications - Rolling stock - Electrical connectors, requirements and test methods | |
| Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2: Pantographs for metros and light rail vehicles | |
| Railway applications - Rolling stock - Protective provisions relating to electrical hazards. | |
| Railway applications - Rolling stock - Protective provisions relating to electrical hazards | |
| Railway applications - Rolling stock - Rules for installation of cabling | |
| Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service | |
| Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Basic requirements and generic process | |
| Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach to Safety | |
| Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Part 1: Basic requirements and generic process. | |
| Railway applications - Three-phase train line voltage characteristics. | |
| Railway applications - Three-phase train line voltage characteristics | |
| Railway applications- The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Part 1: Basic requirements and generic proces. | |
| RAILWAY APPLICATIONS. ELECTRONIC EQUIPMENT USED ON ROLLING STOCK. | |
| RAILWAY APPLICATIONS. FIXED INSTALLATIONS-D.C. SWITCHGEAR. PART 5: SURGE ARRESTERS AND LOW-VOLTAGE LIMITERS FOR SPECIFIC USE IN D.C. SYSTEMS | |
| RAILWAY APPLICATIONS. FIXED INSTALLATIONS. PART 1: PROTECTIVE PROVISIONS RELATING TO ELECTRICAL SAFETY AND EARTHING | |
| Railway applications. Fixed installations. Part 2: Protective provisions against the effects of stray currents caused by d.c. traction system. | |
| RAILWAY APPLICATIONS. FIXED INSTALLATIONS. PART 2: PROTECTIVE PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS. | |
| RAILWAY APPLICATIONS. MOUNTING OF ELECTRONIC EQUIPMENT | |
| Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks | |
| REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE FOR ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS. PART 3: HAND-HELD ELECTROSTATIC FLOCK SPRAY GUNS WITH AN ENERGY LIMIT OF 0,24 MJ OR 5... | |
| REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS. PART 1: HAN-HELD ELECTROSTATIC PAINT SPRAY GUNS WITH AN ENERGY LIMIT OF 0,24 MJ AND THEIR... | |
| REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS. PART 2: HAND-HELD ELECTROSTATIC POWDER SPRAY GUNS WITH AN ENERGY LIMIT OF 5 MJ AND THEIR... | |
| Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports | |
| Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet | |
| Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet | |
| Safety devices required for the safe functioning of equipment with respect to explosion risks | |
| Safety requirements for secondary batteries and battery installations - Part 1: General safety information | |
| Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of... | |
| Solar cells - Datasheet information and product data for crystalline silicon solar cells | |
| Solar wafers - Data sheet and product information for crystalline silicon wafers for solar cell manufacturing | |
| Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 1: General method for "one package equipment"... | |
| Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 2: Matching of sets with headphones if... | |
| SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES. MULTI PURPOSE BOILING BURNERS FOR OUTDOOR USE. | |
| Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing | |
| SPECIFICATION OF THE RADIO DATA SYSTEM (RDS) FOR VHF/FM SOUND BROADCASTING IN THE FREQUENCY RANGE FROM 87,5 TO 108,0 MHZ. (Endorsed by AENOR in November of 2001.) | |
| Stationary electrostatic application equipment for ignitable coating powders - Safety requirements | |
| Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements | |
| Telecommunications bonding networks for buildings and other structures | |
| Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 1: Generalities (Endorsed by AENOR in April of 2011.) | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 2: Tension and suspension clamps for self supporting system (Endorsed by AENOR in April of 2011.) | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 3: Tension and suspension clamps for neutral messenger system (Endorsed by AENOR in April of 2011.) | |
| Test requirements for low voltage aerial bundled cable accessories -- Part 4: Connectors (Endorsed by AENOR in April of 2011.) | |
| Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements | |
| Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Determination of loadability of... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-1: Distribution transformers with cable boxes... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3: Distribution transformers with cable boxes... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised... | |
| Transportable ventilated rooms with or without an internal source of release | |
| Uninterruptible power systems (UPS) -- Part 1-2: General and safety requirements for UPS used in restricted access locations (Endorsed by AENOR in December of 2001.) | |
| Voltage characteristics of electricity supplied by public distribution systems. | |
| Voltage characteristics of electricity supplied by public electricity networks | |
| Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear | |
| Wind turbines - Protective measures - Requirements for design, operation and maintenance | |
| Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) | |
| Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) (Endorsed by AENOR in... | |
| Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear | |
| Wrought steel enclosures for gas-filled high-voltage switchgear and controlgear |
| << Prev | Next >> |