Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1480
1490
1500
1510
1520
1530
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives | |
| Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking | |
| Adhesives for ceramic tiles - Part 2: Test methods | |
| Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts | |
| Adhesives for tiles - Requirements, evaluation of conformity, classification and designation | |
| Aicraft ground support equipment. Specific requirements. Part 2: Catering vehicles (Endorsed by AENOR in November of 2002.) | |
| Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity. | |
| Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airbone noise - Determination of the sound power level... | |
| Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages,... | |
| AIR QUALITY - DETERMINATION OF THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER - REFERENCE METHOD AND FIELD TEST PROCEDURE TO DEMONSTRATE REFERENCE EQUIVALENCE OF MEASUREMENT METHODS | |
| Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitat ed passenger boarding vehicles (Endorsed by AENOR in March of 2007.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by AENOR in February of 2006.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2025.) | |
| Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment (Endorsed by AENOR in October of 2004.) | |
| Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units (Endorsed by AENOR in June of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions (Endorsed by AENOR in June of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | |
| Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles (Endorsed by AENOR in June of 2003.) | |
| Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges (Endorsed by AENOR in June of 2003.) | |
| Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (Endorsed by AENOR in April of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (Endorsed by AENOR in June of 2009.) | |
| Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | |
| Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment (Endorsed by AENOR in July of 2004.) | |
| Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment (Endorsed by AENOR in October of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms (Endorsed by AENOR in July of 2005.) | |
| Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders (Endorsed by AENOR in June of 2005.) | |
| Aircraft ground support equipment. Specific requirements. Part 12: Potable water service equipment (Endorsed by AENOR in November of 2002.) | |
| Aircraft ground support equipment. Specific requirements. Part 13: Lavatory service equipment (Endorsed by AENOR in November of 2002.) | |
| Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form | |
| Assistive products for persons with disability - General requirements and test methods | |
| BDS: PREPARATION OF CUSTOMER DETAIL SPECIFICATIONS (CDS) AND DETAIL SPECIFICATIONS FOR STANDARD PRODUCTION ITEMS WITH CAPABILITY APPROVAL. (Endorsed by AENOR in November of 1996.) | |
| Blank Detail Specification: Light emitting diodes, light emitting diode arrays, light emitting diode displays without internal logic and resistor | |
| Breathing tubes intended for use with anaesthetic apparatus and ventilators | |
| Builders hoists for persons and materials with vertically guided cages. | |
| Builders hoists for persons and materials with vertically guided cages | |
| Builders' hoists for goods - Part 1: Hoists with accessible platforms | |
| Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices | |
| Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment | |
| BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE ELEMENTS. PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS. | |
| BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE ELEMENTS. PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND. | |
| BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS. | |
| BUILDING ACOUSTICS. ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM PERFORMANCE OF ELEMENTS. PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE. | |
| BUILDING HARDWARE - DOOR AND WINDOW BOLTS - REQUIREMENTS AND TEST METHODS | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method | |
| Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method | |
| Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods | |
| Building hardware - Padlocks and padlock fittings - Requirements and test methods | |
| Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements | |
| Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials | |
| CATHODIC PROTECTION FOR FIXED STEEL OFFSHORE STRUCTURES. | |
| Cathodic protection of submarine pipelines. | |
| Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of... | |
| Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity | |
| Chemicals for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Ammonium sulfate | |
| Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods. | |
| Chemicals used for treatment of water intended for human consumption - Calcium tetrahydrogen bis(orthophosphate) | |
| Chemicals used for treatment of water intended for human consumption - Copper sulfate | |
| Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen pyrophosphate | |
| Chemicals used for treatment of water intended for human consumption - Disodium hydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid | |
| Chemicals used for treatment of water intended for human consumption - Liquefied ammonia | |
| Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution | |
| Chemicals used for treatment of water intended for human consumption - Potassium dihydrogen orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium calcium polyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium disulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium fluoride | |
| Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Sodium silicate | |
| Chemicals used for treatment of water intended for human consumption - Sodium sulfite | |
| Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate | |
| Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate | |
| Chemicals used for treatment of water intended for human consumption - Tetrapotassium pyrophosphate | |
| Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate | |
| Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate | |
| Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. AMMONIA SOLUTION. | |
| Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device | |
| Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers | |
| Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems | |
| Controls for heating systems - Part 5: Start-Stop schedulers for heating systems | |
| CONTROLS FOR HEATING SYSTEMS. PART 1: OUTSIDE TEMPERATURE COMPENSATED CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS. | |
| Copper and copper alloys - Hollow rod for free machining purposes | |
| Copper and copper alloys - Profiles and bars for general purposes | |
| Copper and copper alloys - Rod for free machining purposes | |
| Copper and copper alloys - Rod for general purposes | |
| Copper and copper alloys - Seamless, round tubes for general purposes | |
| Copper and copper alloys - Wire for general purposes | |
| Copper and copper alloys - Wrought and unwrought forging stock | |
| COPPER AND COPPER ALLOYS. FORGINGS | |
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys | |
| Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices | |
| CRANES SAFETY. REQUIREMENTS FOR HEALTH AND SAFETY. PART 2: LIMITING AND INDICATING DEVICES. | |
| Cryogenic vessels - Cryogenic flexible hoses. | |
| Curtain walling - Air permeability - Performance requirements and classification | |
| Curtain walling - Air permeability - Test method. | |
| Curtain walling - Resistance to wind load - Test method. | |
| Curtain walling - Watertightness - Laboratory test under static pressure. | |
| Curtain walling - Watertightness - Performance requirements and classification | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test | |
| Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test | |
| DIRECT GAS-FIRED WASHING MACHINES OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW. PART 2: RATIONAL USE OF ENERGY. | |
| DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW. PART 1: SAFETY. | |
| Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters | |
| Doors - Classification of strength requirements | |
| Doors - Climatic influences - Requirements and classification | |
| Doors - Operating forces - Requirements and classification | |
| Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission | |
| Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | |
| Execution of special geotechnical work - Sheet-pile walls | |
| FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME) | |
| FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE QUANTITATIVE COMPOSITION OF FEATHER AND DOWN (MANUAL METHOD) | |
| Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified) | |
| Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified) | |
| Fibre cement flat sheets - Product specification and test methods | |
| Fibre-cement flat sheets - Product specification and test methods | |
| Fibre-cement flat sheets - Product specifications and test methods. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices | |
| FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices. | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators (Endorsed by AENOR in... | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices (Endorsed by AENOR in October of 2006.) | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors (Endorsed by AENOR in October of 2006.) | |
| Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 12: Pumps | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers (Endorsed by AENOR in September of 2006.) | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms. | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms | |
| Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors | |
| Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components | |
| Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance | |
| Fixed firefighting systems components for sprinkler and waterspray systems - Part 1: Sprinklers | |
| Fixed firefighting systems. Components for gas extinguishing systems. Part 7: Requirements and test methods for nozzles for CO2 systems. | |
| Fixed firefighting systems. Powder systems. Part 1: Requirements and test methods for components. | |
| Fixed firefighting sytems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies. | |
| Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices | |
| Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules | |
| Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints | |
| Food processing machinery - Band saw machines - Safety and hygiene requirements | |
| Food processing machinery - Intermediate provers - Safety and hygiene requirements (Endorsed by AENOR in November of 2001.) | |
| Food processing machinery - Mincing machines - Safety and hygiene requirements | |
| Food processing machinery - Moulders - Safety and hygiene requirements (Endorsed by AENOR in November of 2001.) | |
| Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products | |
| Galvanic anodes for cathodic protection in seawater and saline mud | |
| Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation | |
| Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements | |
| Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements | |
| Gas meters - Conversion devices - Part 1: Volume conversion | |
| Gas meters - Conversion devices - Part 2: Energy conversion | |
| Gas meters - Conversion devices - Part 3: Flow computer | |
| Gas meters - Rotary displacement gas meters. | |
| Gas meters - Rotary displacement gas meters | |
| Gas meters - Turbine gas meters | |
| Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements | |
| Gas supply systems. Gas pressure regulating-installat ions on service lines. Functional requirements. | |
| GAS-FIRED ABSORPTION AND ADSORPTION AIR-CONDITIONING AND/OR HEAT PUMP APPLIANCES WITH A NET HEAT INPUT NOT EXCEEDING 70 KW. PART 1: SAFETY | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Test conditions | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 4: Test methods | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 5: Requirements | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances | |
| Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Specific provisions for hybrid appliances | |
| Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types | |
| General principles of cathodic protection in seawater | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST. | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water. | |
| Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| GLASS IN BUILDING. CHEMICALLY STRENGTHENED SODA LIME SILICATE GLASS. PART 1: DEFINITION AND DESCRIPTION. | |
| Gravity drainage systems inside buidlings. Part 4: Wastewater lifting plants. Layout and calculation. | |
| Gravity drainage systems inside buildings. Part 1: General and performance requirements. | |
| GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 2: SANITARY PIPEWORK, LAYOUT AND CALCULATION. | |
| GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS. PART 5: INSTALLATION AND TESTING, INSTRUCTIONS FOR OPERATION, MAINTENANCE AND USE. | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials | |
| Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) | |
| Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods. | |
| Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator | |
| Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator | |
| HOT ENVIRONMENTS. ANALYTICAL DETEMINATION AND INTERPRETATION OF THERMAL STRESS USING CALCULATION OF REQUIRED SWEAT RATE. (ISO 7933:1989 MODIFIED). | |
| IMPACT ABSORBING PLAYGROUND SURFACING. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Impact attenuating playground surfacing - Methods of test for determination of impact attenuation | |
| In vitro diagnostic medical devices - Culture media for microbiology - Performance criteria for culture media | |
| In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media. | |
| IN VITRO DIAGNOSTIC MEDICAL DEVICES. INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY. | |
| Industrial valves - Cast iron check valves. | |
| Industrial valves - Copper alloy gate valves | |
| Industrial valves - Protective caps for valves with flanged connections | |
| Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | |
| Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | |
| Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements | |
| Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements | |
| INDUSTRIAL VALVES. CAST IRON CHECK VALVES. | |
| Industrial valves. Cast iron check valves | |
| Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation | |
| Industrial, commercial and garage doors and gates - Air permeability - Test method | |
| Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification | |
| Industrial, commercial and garage doors and gates - Resistance to wind load - Classification | |
| Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods | |
| Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors | |
| Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. AIR PERMEABILITY. CLASSIFICATION. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. RESISTANCE TO WIND LOAD. TESTING AND CALCULATION. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. SAFETY IN USE OF POWER OPERATED DOORS. REQUIREMENTS. | |
| INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES. SAFETY IN USE OF POWER OPERATED DOORS. TEST METHODS. | |
| INDUSTRIAL, COMMERCIAL ANG GARAGE DOORS AND GATES - RESISTANCE TO WATER PENETRATION - TEST METHOD. | |
| Inland navigation vessels - Rope tubs | |
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas... | |
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas | |
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping | |
| Internal cathodic protection of metallic structures. | |
| Internal cathodic protection of metallic structures | |
| Light and lighting - Lighting of work places - Part 2: Outdoor work places | |
| Light and lighting - Sports lighting | |
| Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces | |
| Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains | |
| Load restraint assemblies on road vehicles. Safety. Part 4: Lashing steel wire ropes | |
| LPG equipment and accessories - Equipping of LPG road tankers (Endorsed by AENOR in August of 2006.) | |
| LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture | |
| Machinery and plants for the preparation of concrete and mortar - Safety requirements | |
| Magnesium and magnesium alloys - Magnesium alloys for cast anodes | |
| Magnesium and magnesium alloys - Unalloyed magnesium | |
| Materials and articles in contact with foodstuffs. Plastics. Part 1: Guide to the selection of conditions and test methods for overall migration. | |
| MECHANICAL VIBRATION. DECLARATION AND VERIFICATION OF VIBRATION EMISSION VALUES. | |
| Mountaineering equipment - Connectors - Safety requirements and test methods | |
| Mountaineering equipment - Harnesses - Safety requirements and test methods | |
| Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking (Endorsed by AENOR in October of 2006.) | |
| Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking (Endorsed by AENOR in October of 2006.) | |
| Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (Endorsed by AENOR in October of 2006.) | |
| Operating forces - Test method - Part 1: Windows | |
| Operating forces. Test method. Part 2: Doors. | |
| PACKAGING - FLEXIBLE TUBES - TEST METHOD FOR THE AIRTIGHTNESS OF CLOSURES. | |
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder | |
| Paragliding equipment - Emergency parachutes - Safety requirements and test methods | |
| PETROLEUM PRODUCTS. DETERMINATION OF REID VAPOUR PRESSURE. WET METHOD. | |
| Plastics and rubber machines - Internal mixers - Safety requirements | |
| Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers | |
| Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off | |
| Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports | |
| Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum | |
| Plastics piping systems - Thermoplastics fittings - Test method for impact resistance | |
| PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS | |
| Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling | |
| Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves. | |
| Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings | |
| PLASTICS PIPING SYSTEMS. BRACKETS FOR RAINWATER PIPING SYSTEMS. TEST METHOD FOR BRACKET STRENGTH. | |
| PLASTICS PIPING SYSTEMS. DETERMINATION OF MOISTURE CONTENT IN THERMOPLASTICS BY COULOMETRY. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. TEST METHODS TO PROVE THE LEAKTIGHTNESS OF THE WALL UNDER SHORT-TERM INTERNAL PRESSURE. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER WET CONDITIONS AND CALCULATION OF THE LONG-TERM SPECIFIC RING STIFFNESS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE LONG-TERM ULTIMATE RELATIVE RING DEFLECTION UNDER WET CONDITIONS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD TO PROVE THE RESISTANCE TO INITIAL RING DEFLECTION. | |
| PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS. | |
| PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING. | |
| PLASTICS PIPING SYSTEMS. POLYETHYLENE PIPING MATERIALS AND COMPONENTS. DETERMINATION OF VOLATILE CONTENT. | |
| Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system | |
| Playground equipment - Part 1: General safety requirements and test method | |
| Playground equipment - Part 2: Additional specific safety requirements and test methods for swings | |
| Playground equipment - Part 3: Additional specific safety requirements and test methods for slides | |
| Playground equipment - Part 4: Additional specific safety requirements and test methods for runways | |
| Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment | |
| Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network | |
| Playground equipment and surfacing - Part 1: General safety requirements and test methods | |
| Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings | |
| Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides | |
| Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways | |
| Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment | |
| Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation | |
| Playground equipment. Part 1: General safety requirements and test method. | |
| Playground equipment. Part 6: Additional specific safety requirements and test methods for rocking equipment. | |
| Polypropylene twines | |
| Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar | |
| Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time | |
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments (Endorsed by AENOR in December of 2000.) | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys... | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous... | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and... | |
| Protection of metallic materials against corrosion. Corrosion likelihood in soil. Part 1: General | |
| Protection of metallic materials againts corrosion- Corrosion likelihood in soil- Part 2: Low alloyed and non alloyed ferrous materials. | |
| Protective gloves for welders. | |
| Protective gloves for welders | |
| Quality classification of timber used in pallets and packaging | |
| Railway applications - Axleboxes - Lubricating greases | |
| Railway applications - Axleboxes - Performance testing | |
| Railway applications - Axleboxes - Rolling bearings | |
| Railway applications - Ride comfort for passengers - Measurement and evaluation | |
| RAILWAY APPLICATIONS. AXLEBOXES. PERFORMANCE TESTING. | |
| RAILWAY APPLICATIONS. AXLEBOXES. ROLLING BEARINGS. | |
| Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests | |
| REFRIGERATING SYSTEMS AND HEAT PUMPS. LIQUID LEVEL INDICATING DEVICES. REQUIREMENTS, TESTING AND MARKING | |
| REFRIGERATING SYSTEMS AND HEAT PUMPS. VALVES. REQUIREMENTS, TESTING AND MARKING | |
| Resilient floor coverings - Agglomerated cork underlays - Specification | |
| Resilient floor coverings - Determination of moisture content of agglomerated composition cork | |
| RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKMENT UNDERLAY | |
| Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings | |
| RESILIENT FLOOR COVERINGS .CORK FLOOR TILES . SPECIFICATION. | |
| RESILIENT FLOOR COVERINGS. VOCABULARY. | |
| Respiratory equipment - Compressed gases for breathing apparatus | |
| Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking | |
| Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers. | |
| Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification | |
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering | |
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing | |
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 1: Steel ball method | |
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method. | |
| Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing | |
| Safety of industrial trucks - Test methods for measuring noise emissions | |
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles | |
| Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers | |
| Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) | |
| SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS . (Endorsed by AENOR in June of 1999.) | |
| Safety requirements for bonded abrasive products | |
| Safety requirements for cableway installations designed to carry persons - Operation | |
| Safety requirements for cableway installations designed to carry persons - Quality assurance | |
| Sawn timber used in industrial packaging - Permitted deviations and preferential sizes | |
| Sawn timber used in pallets - Permitted deviations and guidelines for dimensions | |
| SHUTTERS AND BLINDS POWER OPERATED - SAFETY IN USE - MEASUREMENT OF THE TRANSMITTED FORCE. | |
| SHUTTERS, EXTERNAL AND INTERNAL BLINDS. MISUSE. TEST METHODS. | |
| Shutters, external blinds, internal blinds - Terminology, glossary and definitions. | |
| Sisal twines | |
| Smoke and heat control systems - Part 10: Power supplies (Endorsed by AENOR in August of 2006.) | |
| Smoke and heat control systems - Part 1: Specification for smoke barriers | |
| Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators | |
| Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) | |
| Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits | |
| Smoke and heat control systems - Part 7: Smoke duct sections | |
| Smoke and heat control systems - Part 8: Smoke control dampers | |
| Solid fertilizers - Test sieving (ISO 8397:1988 modified) | |
| Solid fertilizers - Test sieving | |
| Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2)\xb0C (ISO 8190:1992 modified) | |
| Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified) | |
| SOLID FERTILIZERS. MEASUREMENTS OF STATIC ANGLE OF REPOSE. (ISO 8398:1989 MODIFIED). | |
| Sports mats - Part 2: Pole vault and high jump mats, safety requirements | |
| Sports mats - Part 4: Determination of shock absorption | |
| Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications | |
| Steel wire ropes - Safety - Part 1: General requirements | |
| Steel wire ropes - Safety - Part 2: Definitions, designation and classification | |
| Steel wire ropes - Safety - Part 3: Information for use and maintenance | |
| Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications | |
| Steel wire ropes - Safety - Part 5: Stranded ropes for lifts | |
| Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts | |
| Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons | |
| Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons | |
| Steel wire ropes. Safety. Part 6: Stranded ropes for mine shafts | |
| STERILE RECTAL CATHETERS FOR SINGLE USE | |
| Testing fresh concrete - Part 1: Sampling | |
| Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression | |
| Testing hardened concrete - Part 16: Determination of the shrinkage of concrete | |
| Testing hardened concrete - Part 18: Determination of the chloride migration coefficient. | |
| Testing hardened concrete - Part 18: Determination of the chloride migration coefficient | |
| Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds | |
| Testing hardened concrete - Part 2: Making and curing specimens for strength tests | |
| Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines. | |
| Testing hardened concrete - Part 5: Flexural strength of test specimens. | |
| Testing hardened concrete - Part 5: Flexural strength of test specimens | |
| Testing hardened concrete - Part 6: Tensile splitting strength of test specimens. | |
| Testing hardened concrete - Part 6: Tensile splitting strength of test specimens | |
| Testing hardened concrete - Part 7: Density of hardened concrete | |
| TEXTILES. FABRICS. DETERMINATION OF MASS PER UNIT AREA USING SMALL SAMPLES. | |
| Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions | |
| Thermal insulating products for building applications - Determination of behaviour under point load | |
| Thermal insulating products for building applications - Determination of bending behaviour | |
| Thermal insulating products for building applications - Determination of freeze-thaw resistance | |
| Thermal insulating products for building applications - Determination of linear dimensions of test specimens | |
| Thermal insulating products for building applications - Determination of long term water absorption by diffusion | |
| Thermal insulating products for building applications - Determination of long term water absorption by immersion | |
| Thermal insulating products for building applications - Determination of shear behaviour | |
| Thermal insulating products for building applications - Determination of thickness for floating floor insulating products | |
| Thermal insulating products for building applications - Determination of water vapour transmission properties | |
| THERMAL PERFORMANCE OF BUILDINGS. AIR PERMEABILITY OF BUILDING COMPONENTS AND BUILDING ELEMENTS. LABORATORY TEST METHOD | |
| Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames | |
| Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes | |
| Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners. | |
| Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners | |
| TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING. | |
| TOUCH AND CLOSE FASTENERS - DETERMINATION OF PEEL STRENGTH | |
| Touch and close fasteners - Method for closure prior to washing and drying or dry cleaning | |
| Touch and close fasteners. Determination of dimensional change in washing and drying and dry cleaning. | |
| TOUCH AND CLOSE FASTENERS. DETERMINATION OF THE OVERALL AND EFFECTIVE WIDTHS OF TAPES AND THE EFFECTIVE WIDTH OF A CLOSURE. | |
| TRAFFIC CONTROL EQUIPMENT. SIGNAL HEADS. | |
| TRAFFIC CONTROL EQUIPMENT. WARNING AND SAFETY LIGHT DEVICES. | |
| Transportable gas cylinders - Fully wrapped composite cylinders | |
| Transportable gas cylinders - Non-refillable metallic gas cylinders | |
| Vacuum drainage systems inside buildings | |
| Valves - Shell design strength - Part 3: Experimental method. | |
| Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements | |
| Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications | |
| Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation | |
| Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems | |
| Ventilation for buildings - Ductwork hangers and supports - Requirements for strength | |
| Ventilation for buildings. Ductwork. Strenght and leakage of circular sheet metal ducts. | |
| Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter | |
| Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater | |
| Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications | |
| Wastewater treatment plants - Part 10: Safety principles | |
| Wastewater treatment plants - Part 11: General data required | |
| Wastewater treatment plants - Part 12: Control and automation. | |
| Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/floccu lation | |
| Wastewater treatment plants - Part 14: Disinfection | |
| Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants | |
| Wastewater treatment plants - Part 1: General construction principles. | |
| Wastewater treatment plants - Part 3: Preliminary treatment | |
| Wastewater treatment plants - Part 4: Primary settlement. | |
| Wastewater treatment plants - Part 5: Lagooning processes | |
| Wastewater treatment plants - Part 6: Activated sludge process | |
| Wastewater treatment plants - Part 7: Biological fixed-film reactors. | |
| Wastewater treatment plants - Part 9: Odour control and ventilation. | |
| WASTEWATER TREATMENT PLANTS. PART 8: SLUDGE TREATMENT AND STORAGE. | |
| WELDING CONSUMABLES. QUALITY REQUIREMENTS FOR MANUFACTURE, SUPPLY AND DISTRIBUTION OF CONSUMABLES FOR WELDING AND ALLIED PROCESSES. | |
| Windows and doors - Air permeability - Classification | |
| Windows and doors - Resistance to repeated opening and closing - Test method | |
| Windows and doors - Resistance to wind load - Classification | |
| Windows and doors - Resistance to wind load - Test method | |
| Windows and pedestrian doors - Mechanical durability - Requirements and classification. | |
| Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) | |
| Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| << Prev | Next >> |