Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1490
1500
1510
1520
1530
1540
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are... | |
| Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions | |
| Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified) | |
| Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions... | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear... | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions | |
| Agglomerated stone - Modular tiles for flooring and stairs (internal and external) | |
| Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops | |
| Agglomerated stone - Slabs and tiles for wall finishes (internal and external) | |
| Agricultural and forestry tractors - Passenger seat - Requirements and test procedures | |
| Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures | |
| Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures | |
| Agricultural tractors and self-propelled sprayers \x97 Protection of the operator (driver) against hazardous substances \x97 Part 2: Filters, requirements and test procedures | |
| Air quality - Certification of automated measuring systems - Part 1: General principles | |
| Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer\x92s quality management system and post certification surveillance for the manufacturing process | |
| Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources | |
| Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources | |
| Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report | |
| Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion | |
| Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES | |
| Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method | |
| Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods | |
| Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method | |
| BMX bicycles - Safety requirements and test methods | |
| Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure | |
| Breath alcohol test devices other than single use devices - Requirements and test methods | |
| Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods | |
| Building hardware - Mechatronic cylinders - Requirements and test methods | |
| Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods | |
| BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER PRESSURE REDUCING VALVES - REQUIREMENTS AND TESTS | |
| Candles - Specification for sooting behaviour (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2019.) | |
| Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools (Endorsed by AENOR in June of 2011.) | |
| Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2018.) | |
| Cathodic protection - Competence levels and certification of cathodic protection personnel | |
| Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection | |
| Chemicals used for the treatment of swimming pool water - Iron based coagulants | |
| Chemicals used for treatment of swimming pool water - Calcium hypochlorite | |
| Chemicals used for treatment of swimming pool water - Carbon dioxide | |
| Chemicals used for treatment of swimming pool water - Chlorine | |
| Chemicals used for treatment of swimming pool water - Hydrochloric acid | |
| Chemicals used for treatment of swimming pool water - Sodium carbonate | |
| Chemicals used for treatment of water for swimming pools - Sodium hydrogen sulfate | |
| Chemicals used for treatment of water intended for human consumption - Calcium magnesium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Magnesium oxide | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfate | |
| Chimneys - Design, installation and commissioning - Part 1: Chimneys and connecting flue pipes for non-room sealed combustion appliances | |
| Chimneys - Design, installation and commissioning - Part 2: Chimneys and connecting flue pipes for room sealed combustion appliances | |
| Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances | |
| Classification and performance characteristics of techniques for renovation and repair of drains and sewers | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements | |
| Conservation of cultural heritage - Guidelines for design of showcases for exhibition and preservation of objects - Part 1: General requirements | |
| Conservation of cultural heritage - Indoor climate - Part 2: Ventilation management for the protection of cultural heritage buildings and collections | |
| Conservation of cultural property - Packing principles for transport. | |
| Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment | |
| Customer Contact Centres - Requirements for service provision | |
| Cycles - Cycle trailers - Safety requirements and test methods | |
| Determination of the freeze-thaw resistance of autoclaved aerated concrete | |
| Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods | |
| District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods | |
| District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer... | |
| District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 2: Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and... | |
| DOOR LEAVES - GENERAL AND LOCAL FLATNESS - TOLERANCE CLASSES | |
| Doors leaves - Height, width, thickness and squareness - Tolerance classes | |
| Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods | |
| Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods | |
| EDI. MESSAGE. ARRIVAL NOTICE MESSAGE (IFTMAN). | |
| EDI. MESSAGE. BAYPLAN/STOWAGE PLAN OCCUPIED AND EMPTY LOCATIONS (BAPLIE). | |
| EDI. MESSAGE. BOOKING CONFORMATION MESSAGE. (IFTMBC). | |
| EDI. MESSAGE. CUSTOMS DECLARATION MESSAGE (CUSDEC). | |
| EDI. MESSAGE. FIRM BOOKING MESSAGE (IFTMBF). | |
| EDI. MESSAGE. FORWARDING AND CONSOLIDATION SUMMARY MESSAGE (IFCSUM). | |
| EDI. MESSAGE. INSTRUCTION CONTRACT STATUS MESSAGE (IFTMCS). | |
| EDI. MESSAGE. INSTRUCTION MESSAGE (IFTMIN). | |
| EDI. MESSAGE. PAYPLAN/STOWAGE PLAN TOTAL NUMBERS MESSAGE (BAPLTE). | |
| EDI. MESSAGE. PAYROLL DEDUCTIONS ADVICE MESSAGE (PAYDUC). | |
| EDI. MESSAGE. PROVISIONAL BOOKING MESSAGE (IFTMBP). | |
| EDI. MESSAGE. REMITTANCE ADVICE MESSAGE (REMADV). | |
| Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods | |
| Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509 (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2023.) | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite | |
| Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings | |
| Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems, including... | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 | |
| Energy performance of buildings - Overall energy use and definition of energy ratings | |
| Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method | |
| Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method | |
| Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines | |
| Execution of special geotechnical work - Bored piles | |
| Execution of special geotechnical work - Diaphragm walls | |
| Execution of special geotechnical works - Ground anchors | |
| Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling | |
| Extended application of results from fire resistance tests for service installations - Part 1: Ducts | |
| Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers | |
| Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for... | |
| Extended application reports on the fire performance of construction products and building elements | |
| Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals | |
| Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of calcium and formate in calcium foliar fertilizers | |
| Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography | |
| Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC | |
| Fertilizers - Determination of cyanamide nitrogen | |
| Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of extracted phosphorus | |
| Fertilizers - Determination of N-(1,2-dicarboxyethy l)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of N-(2-nitrophenyl)pho sphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch | |
| Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients | |
| Fertilizers - Determination of the fineness of grinding (dry procedure) | |
| Fertilizers - Determination of the fineness of grinding of soft natural phosphates | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free | |
| Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods | |
| Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) | |
| Fertilizers - Determination of urease inhibitor N-(n-butyl)thiophosp horic triamide (NBPT) using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Extraction and determination of elemental sulfur | |
| Fertilizers - Extraction of phosphorus soluble in 2 % citric acid | |
| Fertilizers - Extraction of phosphorus soluble in 2 % formic acid | |
| Fertilizers - Extraction of phosphorus soluble in Joulie's alcaline ammonium citrate | |
| Fertilizers - Extraction of soluble phosphorus according to Petermann at 65 \xb0C | |
| Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature | |
| Fertilizers - Extraction of total sulfur present in various forms | |
| Fertilizers - Extraction of water soluble phosphorus | |
| Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms | |
| Fertilizers - Extraction of water-soluble calcium, magnesium, sodium and sulfur in the form of sulfates | |
| Fertilizers - Spectrophotometric determination of biuret in urea | |
| Fibres - Elasticity of fibres - Test methods | |
| Film identification - Enhancing interoperability of metadata - Element sets and structures (Endorsed by AENOR in July of 2011.) | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method. | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters | |
| Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems | |
| Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods | |
| Floating leisure articles for use on and in the water - Part 2: Consumer information | |
| Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices | |
| Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices | |
| Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices | |
| Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices | |
| Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR | |
| Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked... | |
| Founding - Ausferritic spheroidal graphite cast irons | |
| Founding - Compacted (vermicular) graphite cast irons | |
| Founding - Spheroidal graphite cast irons | |
| Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings | |
| FOUNDING. GREY CAST IRONS. | |
| FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS. | |
| Fugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks | |
| Furniture - Strength, durability and safety - Requirements for non-domestic tables | |
| Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | |
| Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements. | |
| Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW... | |
| Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances | |
| Gas-fired central heating boilers - Part 2-3: Specific standard for hybrid units combining a gas-fired boiler and an electrical heat pump in a product | |
| Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW | |
| Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW | |
| Gas-fired heating boilers - Part 1: General requirements and tests | |
| General purpose adhesives for structural assembly - Requirements and test methods | |
| Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays | |
| Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements | |
| Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements | |
| Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties | |
| Glass in Building - Basic alumino silicate glass products - Part 2: Product standard | |
| Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description | |
| Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification | |
| Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard | |
| Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement | |
| Hardware for furniture - Strength and durability of extension elements and their components | |
| Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows... | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources | |
| Heating systems in buildings - Design of heat pump heating systems | |
| Heating systems in buildings - Inspection of boilers and heating systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements) | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, combustion systems (boilers) | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: Space heating generation systems, the performance and quality of district heating and... | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems | |
| Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria | |
| Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing | |
| Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines | |
| Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment | |
| Industrial valves - Actuators - Part 1: Terminology and definitions | |
| Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements | |
| Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements | |
| Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements | |
| Industrial valves - Performance characteristics of thermoplastic valves when used as construction products | |
| Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances | |
| Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 2: Test waters | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method | |
| Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels | |
| Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 1: General requirements | |
| Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements | |
| Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements | |
| Inland navigation vessels - Equipment for rope leading - Part 1: General requirements | |
| Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead | |
| Inland navigation vessels - Equipment for rope leading - Part 3: Roller fairleads | |
| Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead | |
| Inland navigation vessels - Studless anchor chain - Anchor equipment | |
| Intelligent transport systems - eSafety - eCall high level application requirements (HLAP) | |
| Intelligent transport systems - ESafety - ECall minimum set of data | |
| Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods | |
| Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) | |
| Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water | |
| Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method | |
| Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method | |
| Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) | |
| Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) | |
| LIQUID PETROLEUM PRODUCTS. UNLEADED PETROL. DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID). | |
| Maintenance - Maintenance Key Performance Indicators | |
| Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources | |
| Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology | |
| Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples | |
| Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation | |
| Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification | |
| Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid | |
| Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria | |
| Non-destructive testing - Leak testing - Bubble emission techniques | |
| Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays | |
| Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction | |
| Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | |
| Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling | |
| Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses | |
| One off Kachelgrund\xf6fen/P utzgrund\xf6fen (tiled/mortared stoves) - Dimensioning | |
| Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating | |
| Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test | |
| Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test | |
| Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades | |
| Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials | |
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae | |
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi | |
| Particulate air filters for general ventilation - Standardised dimensions | |
| Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics | |
| Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method | |
| Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (=4 double bonds) fatty acid methyl esters (PUFA) by gas... | |
| Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method | |
| Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates | |
| Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates | |
| Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content | |
| Plastics - Sorted plastics wastes - Part 1: General Characterisation | |
| Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods | |
| Plastics piping systems - Systems within the building structure - Mounting and fixing of components in the test apparatus to thermal attack by a single burning item | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE... | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the... | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes. | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings | |
| Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General requirements for portable monitor assemblies | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 3: Foam devices | |
| Power operated pedestrian doorsets - Safety in use - Requirements and test methods | |
| Pre-shaped growing media - Determination of length, width, height, volume and bulk density | |
| Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance | |
| Precast concrete products - Resin bound concrete - Requirements and test methods | |
| Precast concrete products - Retaining wall elements | |
| Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes | |
| Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance | |
| Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity | |
| Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali | |
| Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers | |
| Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off. | |
| Products used for the treatment of swimming pool water - Filter media | |
| Products used for treatment of swimming pool water - Powdered activated carbon | |
| Products used for treatment of water intended for human consumption - Natural unexpanded aluminosilicates | |
| Products used for treatment of water intended for human consumption - Natural zeolite | |
| Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing | |
| Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 - Part 4: Test methods | |
| Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 1: Terminology | |
| Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 3: Minimum labelling requirements | |
| Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 2: Categories and types of firework | |
| Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 5: Requirements for construction and performance | |
| Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox | |
| Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring | |
| Railway applications - Braking - Automatic variable load sensing devices | |
| Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles | |
| Railway applications - Braking - Brake pads | |
| Railway applications - Braking - Brake pipe accelerator valve | |
| Railway applications - Braking - Distributor valves and distributor-isolatin g devices | |
| Railway applications - Braking - Empty-loaded changeover devices | |
| Railway applications - Braking - Relay valves | |
| Railway applications - Braking - Static brake testing | |
| Railway applications - Braking - Wheel slide protection | |
| Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions | |
| Railway applications - Braking systems of high speed trains - Part 2: Test methods | |
| Railway applications - Closing and locking devices for payload protecting devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling | |
| Railway applications - Definition of vehicle reference masses | |
| Railway applications - Designation system for railway vehicles - Part 1: General principles | |
| Railway applications - Designation system for railway vehicles - Part 2: Product groups | |
| Railway applications - Designation system for railway vehicles - Part 3: Designation of installation sites and locations (Endorsed by AENOR in October of 2006.) | |
| Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock | |
| Railway applications - Gauges - Part 2: Rolling stock gauge | |
| Railway applications - Gauges - Part 3: Structure gauges | |
| Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance | |
| Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure | |
| Railway applications - Marking on railway vehicles - Part 1: Freight wagons | |
| Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines | |
| Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service | |
| Railway applications - Method for determining the equivalent conicity | |
| Railway applications - Noise Emission - Measurement of noise inside driver's cabs | |
| Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation | |
| Railway applications - Pneumatic half couplings | |
| Railway applications - Railway rolling stock - Buffers | |
| Railway applications - Railway rolling stock - Draw gear and screw coupling | |
| Railway applications - Requirements for bogies and running gears | |
| Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in... | |
| Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working | |
| Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements | |
| Railway applications - Track - Restoration of rails by electric arc welding | |
| Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working | |
| Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements | |
| Railway applications - Track - Switches and crossings - Crossing components made of cast austenitic manganese steel | |
| Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working | |
| Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements | |
| Railway applications - Vehicle reference masses | |
| Railway applications - Wheel/rail friction management - Flange lubrication | |
| Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications | |
| Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus (Endorsed by AENOR in September of 2008.) | |
| Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus | |
| Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus | |
| Rough-terrain variable reach trucks - Visibility - Test methods and verification | |
| Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation | |
| Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures | |
| Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test | |
| Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling | |
| Safety for conveyor belts for winter sport or leisure use | |
| Safety of industrial trucks - Additional requirements for automated functions on trucks | |
| Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings | |
| Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15... | |
| Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling | |
| Secure destruction of confidential material - Code of practice | |
| Security of drinking water supply - Guidelines for risk and crisis management - Part 1: Crisis management | |
| Security of drinking water supply - Guidelines for risk and crisis management - Part 2: Risk management | |
| Soil improvers and growing media - Determination of particle size distribution | |
| Specifications for external renders and internal plasters based on organic binders | |
| Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements | |
| Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements (Endorsed by AENOR in December of 2009.) | |
| Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar | |
| Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances | |
| Steel static storage systems - Adjustable pallet racking systems - Principles for structural design | |
| Steel static storage systems - Application and maintenance of storage equipment | |
| Steel static storage systems - Specification of storage equipment | |
| Steel static storage systems - Terms and definitions | |
| Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures | |
| Structural finger jointed solid timber - Performance requirements and minimum production requirements | |
| Supersulfated cement - Composition, specifications and conformity criteria | |
| Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces | |
| Sustainability of construction works - Data quality for environmental assessment of products and construction work - Selection and use of data | |
| Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products | |
| Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works | |
| Swimming pools - Part 1: Safety requirements for design | |
| Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates | |
| Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps | |
| Textile floor coverings - Minimum requirements for needled floor coverings for single usage in events of limited duration | |
| Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test | |
| Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction | |
| Thermal and/ or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster | |
| Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster | |
| Thermal insulating products for building applications - Determination of compressive creep | |
| Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions | |
| Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23\xb0C/50% relative humidity) | |
| Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions | |
| Thermal insulating products for building applications - Determination of tensile strength parallel to faces | |
| Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces | |
| Thermal insulating products for building applications - Determination of the apparent density | |
| Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance | |
| Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products | |
| Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification | |
| Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification | |
| Thermal spraying - Component related procedure qualification | |
| Thermal spraying - Determination of shear load resistance of thermally sprayed coatings | |
| Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings | |
| Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units | |
| Timber Structures - Test methods - Torsional resistance of driving in screws | |
| Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses | |
| Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements | |
| Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports | |
| Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15... | |
| Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/vent ilated rooms to evaluate thermal and acoustic conditions | |
| Ventilation for buildings - Determining performance criteria for residential ventilation systems | |
| Ventilation for buildings - Ducts and ductwork components, leakage classification and testing | |
| Ventilation for buildings - Ductwork - Cleanliness of ventilation systems | |
| Ventilation for buildings - Fire dampers | |
| Ventilation for buildings - Fire precautions for air distribution systems in buildings | |
| Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale | |
| Vitreous and porcelain enamels - Terminology | |
| Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing | |
| Water quality - Guidance on quantitative and qualitative investigations of marine phytoplankton | |
| Water quality - Guidance on the estimation of fish abundance with mobile hydroacoustic methods | |
| Water quality - Guidance standard for the surveying of macrophytes in lakes | |
| Water quality - Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water | |
| Water quality - Guidance standard on assessing the hydromorphological features of lakes | |
| Water quality - Guidance standard on determining the degree of modification of river hydromorphology | |
| Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition (Endorsed by AENOR in April of 2008.) | |
| Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition (Endorsed by AENOR in March of 2011.) | |
| Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipments (Endorsed by AENOR in March of 2011.) | |
| Wood flooring - Determination of bending strength under static load - Test methods | |
| Wood flooring - Determination of resistance to indentation - Test method |
| << Prev | Next >> |