Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1480
1490
1500
1510
1520
1530
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method | |
| Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry | |
| Automatically blast-cleaned and automatically prefabrication primed structural steel products | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY, DUAL-IN-LINE, WITH 20X10 MM BASE. (Endorsed by AENOR in September of 1996.) | |
| BDS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY. (Endorsed by AENOR in September of 1996.) | |
| BRAZING. FLUXES FOR BRAZING. CLASSIFICATION AND TECHNICAL DELIVERY CONDITIONS. | |
| Bright steel products - Technical delivery conditions - Part 1: General | |
| Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes | |
| Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels | |
| Bright steel products - Technical delivery conditions - Part 4: Case hardening steels | |
| Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering | |
| Bright steel products - Technical delivery conditions | |
| Buiding hardware - Controlled door closing devices - Requirements and test methods | |
| Building hardware - Controlled door closing devices - Requirements and test methods | |
| Building hardware - Door coordinator devices - Requirements and test methods | |
| Building hardware - Door cordinator devices - Requirements and test methods | |
| Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods | |
| Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements | |
| Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements | |
| Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements | |
| Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | |
| Case hardening steels - Technical delivery conditions | |
| Cement-bonded particleboards - Determination of hard body impact resistance | |
| Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method | |
| Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method | |
| Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method | |
| Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas | |
| Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method (Endorsed by AENOR in September of 2006.) | |
| Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method | |
| Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co,... | |
| Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and... | |
| CHEMICAL ANALYSIS OF FERROUS MATERIALS. DETERMINATION OF OXYGEN IN STEEL AND IRON. PART 1: SAMPLING AND PREPARATION OF STEEL SAMPLES FOR OXYGEN DETERMINATION. | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) (Endorsed by AENOR... | |
| Chemicals used for treatment of water intended for human consumption - Calcium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite | |
| Chemicals used for treatment of water intended for human consumption - Sulfur dioxide | |
| Clay roofing tiles for discontinuous laying - Determination of geometric characteristics | |
| Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions | |
| COLD FORMED SHEET PILING OF NON ALLOY STEELS. PART 1: TECHNICAL DELIVERY CONDITIONS. | |
| Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions | |
| Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties | |
| Cold reduced tinmill products - Blackplate | |
| Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel. | |
| Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state | |
| Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions | |
| COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING. TECHNICAL DELIVERY CONDITIONS. | |
| Cold rolled narrow steel strip - Tolerances on dimensions and shape | |
| Cold rolled narrow steel strip for heat treatment - Technical delivery conditions | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 1: GENERAL. | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 2: CASE HARDENING STEELS. | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 3: STEELS FOR QUENCHING AND TEMPERING. | |
| COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 4: SPRING STEELS AND OTHER APPLICATIONS. | |
| Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state | |
| Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions | |
| Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances | |
| Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape | |
| Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions | |
| Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions | |
| Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions | |
| Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions | |
| Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions (Endorsed by AENOR in September of 2006.) | |
| Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions (Endorsed by AENOR in September of 2006.) | |
| Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape | |
| CONTINUOUSLY HOT-ROLLED UNCOATED PLATE, SHEET AND STRIP OF NON-ALLOY AND ALLOY STEELS. TOLERANCES ON DIMENSIONS AND SHAPE. | |
| Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications (Endorsed by AENOR in September of 2006.) | |
| Continuously organic coated (coil coated) steel flat products - Technical delivery conditions | |
| Corrosion resistant steel castings | |
| Creep resisting steels, nickel and cobalt alloys | |
| Definition of steel products | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements (Endorsed by AENOR in September of 2006.) | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats (Endorsed by AENOR in September of 2006.) | |
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections (Endorsed by AENOR in September of 2006.) | |
| Designation systems for steels - Part 1: Steel names | |
| Designation systems for steels - Part 2: Numerical system | |
| Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method (Endorsed by AENOR in September of 2006.) | |
| Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method | |
| DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS | |
| DOMESTIC FURNITURE. SEATING. DETERMINATION OF STABILITY. | |
| Doors - Behaviour between two different climates - Test methods | |
| Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions | |
| Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions | |
| Evaluation of resistance of steel products to hydrogen induced cracking (HIC) | |
| Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components | |
| Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures | |
| Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications | |
| Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | |
| FERRITIC-PEARLITIC STEELS FOR PRECIPITATION HARDENING FROM HOT-WORKING TEMPERATURES. | |
| Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements | |
| Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements | |
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges | |
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges | |
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges | |
| Flat products made of steels for pressure purposes - Part 1: General requirements | |
| Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties | |
| Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized | |
| Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties | |
| Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled | |
| Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered | |
| Flat products made of steels for pressure purposes - Part 7: Stainless steels | |
| Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods | |
| Glass in building - Coated glass - Part 1: Definitions and classification | |
| Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings | |
| Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings | |
| Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard | |
| Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces | |
| Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description | |
| Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard | |
| GRAIN-ORIENTED ELECTRICAL STEEL ANS STRIP DELIVERED IN THE FULLY PROCESSED STATE. | |
| Heat resistant steel castings. | |
| Heat resisting steels and nickel alloys | |
| Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels (Endorsed by AENOR in September of 2006.) | |
| Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties | |
| Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties | |
| Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions | |
| Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions | |
| Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass | |
| Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels | |
| Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| HOT ROLLED NARROW STEEL STRIP. TOLERANCES ON DIMENSIONS AND SHAPE. | |
| Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels | |
| Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalize d rolled weldable fine grain structural steels | |
| Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels | |
| Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance | |
| Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition | |
| Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions | |
| Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions | |
| Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions | |
| Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions | |
| Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| Hot rolled steel channels, I and H sections - Dimensions and masses | |
| HOT ROLLED STEEL CHANNELS. TOLERANCES ON SHAPE, DIMENSIONS AND MASS. | |
| HOT ROLLED STEEL EQUAL FLANGE TEES WITH RADIUSED ROOT AND TOES. DIMENSions and tolerances on shape and dimensions. | |
| Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties | |
| Hot, warm or cold forging - Repair conditions prior to delivery | |
| HOT-ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD Forming. Part 1: General delivery conditions. | |
| Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape | |
| Hot-rolled steels for quenched and tempered springs - Technical delivery conditions | |
| Industrial valves - Cast iron gate valves | |
| Information supplied by the manufacturer of medical devices | |
| INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS. GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS. | |
| Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants | |
| Iron and steel - Determination of the conventional depth of hardening after surface heating (Endorsed by AENOR in September of 2006.) | |
| Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams. | |
| Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids | |
| KITCHEN FURNITURE. CO-ORDINATING SIZES FOR KITCHEN FURNITURE AND KITCHEN APPLIANCES. | |
| Laser welded tailored blanks - Technical delivery conditions | |
| Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods | |
| Magnetic materials (iron and steel) for use in relays. | |
| Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations (Endorsed by AENOR in September of 2006.) | |
| Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit | |
| Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies | |
| Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester | |
| Magnetic materials - Specification for sintered soft magnetic materials | |
| Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability | |
| MAGNETIC MATERIALS. METHODS OF DETERMINATION OF THE GEOMETRICAL CHARACTERISTICS OF ELECTRICAL STEEL SHEET AND STRIP. | |
| Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems. | |
| Malleable cast iron fittings with compression ends for steel pipes | |
| Manually operated taps for gas burning appliances | |
| Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value | |
| Metallic materials - Drop weight tear test | |
| Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines | |
| Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models | |
| Metallic materials - Tube ring hydraulic pressure test | |
| Metallic products - Types of inspection documents | |
| Method for the derivation of minimum values of proof strength of steel at elevated temperatures | |
| Methods of test for masonry - Part 2: Determination of flexural strength. (Consolidated versi\xf3n) | |
| Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method (Endorsed by AENOR in August of 2006.) | |
| Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar | |
| Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates. | |
| Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars. | |
| Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar. | |
| METHODS OF TEST FOR MORTAR FOR MASONRY - PART 19: DETERMINATION OF WATER VAPOUR PERMEABILITY OF HARDENED RENDERING AND PLASTERING MORTARS | |
| METHODS OF TEST FOR MORTAR FOR MASONRY - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (BY SIEVE ANALYSIS) | |
| Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates. | |
| Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars | |
| Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) | |
| METHODS OF TEST FOR MORTAR FOR MASONRY - PART 4: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY PLUNGER PENETRATION) | |
| METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR | |
| METHODS OF TEST FOR MORTAR FOR MASONRY - PART 7: DETERMINATION OF AIR CONTENT OF FRESH MORTAR | |
| Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar | |
| METHODS OF TEST FOR MORTAR FOR MASONRY. PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE) | |
| Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars | |
| Micrographic examination of the non-metallic inclusion content of steels using standard pictures | |
| Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements (Endorsed by AENOR in August of 2006.) | |
| Nitriding steels - Technical delivery conditions. | |
| Non destructive testing - Ultrasonic testing of steel bars | |
| Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions | |
| Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liqiuids - Technical delivery conditions | |
| Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method). | |
| NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION | |
| Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings | |
| Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings | |
| NON-DESTRUCTIVE TESTING OF STEEL FORGINGS. PART 2: PENETRANT TESTING. | |
| NON-DESTRUCTIVE TESTING OF STEEL TUBES. QUALIFICATION AND COMPETENCE OF LEVEL 1 AND 2 NON-DESTRUCTIVE TESTING PERSONNEL. | |
| Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products... | |
| Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems (Endorsed by AENOR in August of 2006.) | |
| Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems | |
| Non-invasive sphygmomanometers - Part 4: Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers | |
| NON-INVASIVE SPHYGMOMANOMETERS. PART 3: SUPPLEMENTARY REQUIREMENTS FOR ELECTRO-MECHANICAL BLOOD PRESSURE MEASURING SYSTEMS. | |
| Open die steel forgings for general engineering purposes - Part 1: General requirements | |
| Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels | |
| Open die steel forgings for general engineering purposes - Part 3: Alloy special steels | |
| Open die steel forgings for general engineering purposes - Part 4: Stainless steels | |
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing | |
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification | |
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability | |
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability | |
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties | |
| Particleboards - Determination of moisture resistance - Part 1: Boil test | |
| Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation | |
| Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation. | |
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control | |
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and... | |
| Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions (Endorsed by AENOR in December of 2007.) | |
| Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions | |
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control | |
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions | |
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions | |
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for Vacuum drainage systems and for drainage systems on... | |
| Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges | |
| Plastics - Determination of cadmium - Wet decomposition method. | |
| Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers | |
| Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing... | |
| Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness | |
| Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints | |
| Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. DETERMINATION OF THE RESISTANCE TO CHEMICAL ATTACK FROM THE INSIDE OF A SECTION IN A DEFLECTED CONDITION. | |
| PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS. PART 3: DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS. | |
| Playground equipment and surfacing - Part 1: General safety requirements and test methods | |
| PLYWOOD. DESCRIPTION OF BENDING PROPERTIES FOR STRUCTURAL PLYWOOD. | |
| PLYWOOD. FORMALDEHYDE RELEASE CLASSES DETERMINED BY THE GAS ANALISYS METHOD. | |
| Portable ladders for fire service use | |
| Power-driven brushes - Part 1: Definitions and nomenclature | |
| Power-driven brushes - Part 2: Safety requirements | |
| Precast concrete products - General rules for factory production control of glass-fibre reinforced cement | |
| Precast concrete products - Hollow core slabs | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test" | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density | |
| Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content | |
| Precast concrete products - Test methods for glassfibre reinforced concrete | |
| Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity | |
| Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) | |
| Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay | |
| Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements (Endorsed by AENOR in September of 2008.) | |
| Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain mail gloves and arm guards | |
| Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail. | |
| Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials. | |
| Protective clothing - Visibility clothing for non-professional use - Test methods and requirements | |
| Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination. | |
| Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps,... | |
| Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code... | |
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking | |
| Round steel rod for cold heading and cold extrusion - Dimensions and tolerances | |
| Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique | |
| Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed | |
| Safety of escalators and moving walks - Part 1: Construction and installation | |
| Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks | |
| Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks | |
| Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant (Endorsed... | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method | |
| Safety of machinery - Human physical performance - Part 1: Terms and definitions | |
| Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery | |
| Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation | |
| Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery | |
| Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency | |
| Safety of machinery - Prevention of unexpected start-up | |
| SAFETY OF MACHINERY. PREVENTION OF UNEXPECTED START-UP. | |
| Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification | |
| Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification | |
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification | |
| Seamless and welded steel tubes - Dimensions and masses per unit length | |
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes | |
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties. | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties | |
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes | |
| Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms (Endorsed by AENOR in August of... | |
| Secure storage units. Requirements, classification and methods of tests for resistance to burglary. Part 2: Deposit systems. | |
| Semi-finished products for forging - Tolerances on dimensions shape and mass | |
| SS: ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY. (Endorsed by AENOR in September of 1996.) | |
| Stainless steel bars for pressure purposes | |
| Stainless steel strip for springs - Technical delivery conditions | |
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | |
| Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | |
| Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | |
| STAINLESS STEELS. PART 1: LIST OF STAINLESS STEELS. | |
| STAINLESS STEELS. PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS FOR GENERAL PURPOSES. | |
| Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Inde x] | |
| Steel castings - Austenitic manganese steel castings | |
| Steel castings - Steel castings for general engineering uses | |
| Steel castings for pressure purposes | |
| Steel closed die forgings - General technical delivery conditions | |
| Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings | |
| Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines | |
| Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) | |
| Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate) | |
| Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel... | |
| Steel for the reinforcement of concrete - Galvanized reinforcing steel products | |
| Steel for the reinforcement of concrete - Weldable reinforcing steel - General | |
| Steel forgings for pressure purposes - Part 1 : General requirements for open die forgings | |
| Steel forgings for pressure purposes - Part 1: General requirements for open die forgings | |
| Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties | |
| Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties | |
| STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES. | |
| Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties | |
| Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength. | |
| Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength | |
| STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS. | |
| Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels | |
| Steel products - Inspection documents - List of information and description (Endorsed by AENOR in September of 2006.) | |
| Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions (Endorsed by AENOR in September of 2006.) | |
| Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels. | |
| Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions. | |
| Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working. | |
| Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels. | |
| Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering. | |
| Steel sheet and strip for welded gas cylinders | |
| Steel sheet piles - Test methods | |
| Steel threaded pipe fittings. | |
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas | |
| Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar (Endorsed by AENOR in September of 2006.) | |
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating (Endorsed by AENOR in September of 2006.) | |
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings. | |
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modifie d coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings | |
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings (Endorsed by AENOR in September of 2006.) | |
| Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection | |
| Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes | |
| Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes | |
| Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes | |
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems | |
| Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes | |
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems | |
| Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards | |
| Steel wire and wire products - Bead wire | |
| Steel wire and wire products - General - Part 1: Test methods | |
| Steel wire and wire products - General - Part 2: Wire dimensions and tolerances | |
| Steel wire and wire products - Hose reinforcement wire (Endorsed by AENOR in September of 2006.) | |
| Steel wire and wire products - Hose reinforcement wire | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings. | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings. | |
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings. | |
| Steel wire and wire products - Steel wire for ropes - Part 1: General requirements | |
| Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications | |
| Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications | |
| Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire | |
| Steel wire and wire products -Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings | |
| Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes | |
| Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes | |
| Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing | |
| Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing | |
| Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing | |
| Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products | |
| Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire | |
| Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire | |
| Steel wire for mechanical springs - Part 3: Stainless spring steel wire | |
| Steel wire nails - Part 1: Loose nails for general applications | |
| Steels - Determination of niobium - Spectrophotometric method | |
| Steels - Determination of nitrogen (trace amounts) - Spectrophotometric method | |
| Steels and cast irons - Determination of chromium content - Flame atomic absorption spectrometric method (FAAS) | |
| Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties | |
| Steels for quenching and tempering - Part 1: General technical delivery conditions | |
| Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels | |
| Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels | |
| Steels for quenching and tempering for construction purposes - Technical delivery conditions | |
| Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars | |
| Structural steel equal and unequal leg angles - Part 1: Dimensions | |
| Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions | |
| Structural steel I and H sections - Tolerances on shape and dimensions | |
| SURFACE QUALITY CLASSES FOR HOT-ROLLED BARS AND RODS. TECHNICAL DELIVEry conditions. | |
| Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test | |
| Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height | |
| Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates | |
| Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) | |
| Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler | |
| Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven | |
| Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption | |
| Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL). | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION. | |
| TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER. PYKNOMETER METHOD. | |
| Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour (Endorsed by AENOR in August of 2006.) | |
| Textiles - Woven fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length (ISO 7211-2:1984 modified) | |
| TEXTILES AND TEXTILE PRODUCTS. BURNING BEHAVIOUR. CURTAINS AND DRAPES. DETAILED PROCEDURE TO DETERMINE THE FLAME SPREAD OF VERTICALLY ORIENTED SPECIMENS. | |
| Thin magnetic steel strip and sheet for use at medium frequencies | |
| THREADED PIPE FITTING IN MALLEABLE CAST IRON. | |
| THREADED PIPE FITTING IN MALLEABLE CAST IRON | |
| Threaded pipe fittings in malleable cast iron | |
| Timber structures - Test methods - Joints made with punched metal plate fasteners | |
| Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding | |
| Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) | |
| VACUUM SEWERAGE SYSTEMS OUTSIDE BUILDINGS. | |
| VALVE STEELS AND ALLOYS FOR INTERNAL COMBUSTION ENGINES. | |
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves | |
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves | |
| Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants | |
| VALVES FOR WATER SUPPLY. SPECIFICATION FOR SUITABLE AND APPROPRIATE VERIFICATION TESTS. PART 5: CONTROL VALVES. | |
| Vocabulary of heat treatment terms for ferrous products | |
| Water slides - Part 1: Safety requirements and test methods | |
| Water slides - Part 2: Instructions | |
| Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections | |
| Weldable structural steels for fixed offshore structures - Technical delivery conditions | |
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes (Endorsed by AENOR in September of 2006.) | |
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel (Endorsed by AENOR in September of 2006.) | |
| Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions. | |
| Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties | |
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | |
| Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding | |
| Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding | |
| WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS. | |
| Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels | |
| Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels | |
| Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys | |
| Welding. Recomendations for welding of metallic materials. Part 5: Welding of clad steel | |
| Welding. Recommendations for welding of metallic materials. Part 3: Arc welding of stainless steels. | |
| Welding. Recommendations for welding of metallic materials. Part 4: Arc welding of aluminium and aluminium alloys. | |
| Welding. Recommendations for welding of metallic materials. Part 7: Electron beam welding. | |
| Welding. Recommendations for welding of metallic materials. Part 8: Welding of cast irons | |
| WINDOWS AND DOORS - AIR PERMEABILITY - TEST METHOD | |
| WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote | |
| Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote | |
| Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) | |
| Wood-based panels - Determination of duration of load and creep factors | |
| WOOD-BASED PANELS. DETERMINATION OF CHARACTERISTIC VALUES OF MECHANICAL PROPERTIES AND DENSITY. | |
| Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables | |
| Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| << Prev | Next >> |