Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1460
1470
1480
1490
1500
1510
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1530
1540
1550
1560
1570
1580
1600
1620
| Product Name | Notes |
|---|---|
| A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation | |
| Actions on Structures | |
| Adjustable speed electrical power drive systems Part 6: Guide for determination of types of load duty and corresponding current ratings | |
| Alkaline Secondary Cells and Batteries - Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells | |
| AMENDMENT 1 Electrostatics \x96 Part 1: Electrostatic phenomena \x96 Principles and measurements | |
| AMENDMENT 1 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals | |
| AMENDMENT 1 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 4: Typical values | |
| Amendment 1 Medical electrical equipment - M ed ica I elect ron accelerators in the range 1 MeV to 50 MeV - Guidelines for functional performance characteristics | |
| AMENDMENT 1 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-2: Electrical transmission characteristics and test methods of Symmetrical pair/quad cables | |
| Amendment 1 Performance of high-voltage direct current (HVDC) systems with line-commutated converters \x96 Part 1: Steady-state conditions | |
| AMENDMENT 1 Performance of high-voltage direct current (HVDC) systems with line-commutated converters \x96 Part 3: Dynamic conditions | |
| AMENDMENT 1 Performance of high-voltage direct current (HVDC) systems with linecommutated converters \x96 Part 2: Faults and switching | |
| AMENDMENT 2 Performance of high-voltage direct current (HVDC) systems with line-commutated converters \x96 Part 1: Steady-state conditions | |
| AMENDMENT 2 Performance of high-voltage direct current (HVDC) systems with line-commutated converters \x96 Part 3: Dynamic conditions | |
| AMENDMENT 2 Performance of high-voltage direct current (HVDC) systems with linecommutated converters \x96 Part 2: Faults and switching | |
| Analyser systems \x96 Guidance for maintenance management | |
| Application guide for low-voltage fuses | |
| Application guide for the selection of high-voltage current-limiting fuse-links for transformer circuits | |
| Application guidelines for nonlinear coefficient measuring methods | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 900: Guidance for implementation of IEC 61968-9 | |
| Application of symbols for binary logic and analogue elements | |
| Application of the short-circuit ratings of low-voltage switchgear and controlgear CORRIGENDUM 1 | |
| Application of the short-circuit ratings of low-voltage switchgear and controlgear | |
| Approaches to conformance and certification testing for design automation standards | |
| Assessment of the Risk of Damage Due to Lightning | |
| Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 2: 21-Pin Connector for Video Systems - Application No.2 First Edition | |
| Audio/video, information and communication technology equipment \x96 Part 2: Explanatory information related to IEC 62368-1:2018 | |
| Audio/video, information and communication technology equipment \x96 Part 2: Explanatory information related to IEC 62368-1 | |
| Background of terms and definitions of cascaded two-ports | |
| Best practices for an internal BPoS handbook | |
| Brush-Holders for Electrical Machines Guide to the Measurement of the Static Thrust Applied to Brushes | |
| Cable Assemblies, Cables, Connectors and Passive Microwave Components - Screening Attenuation Measurement by the Reverberation Chamber Method | |
| Cables, Cable Assemblies and Connectors - Introduction to Electromagnetic (EMC) Screening Measurements | |
| Calibration Tapes for Broadcast VTRs | |
| Cardiac defibrillators - Cardiac defibrillator-monito rs - Part 1: Operation | |
| Cardiac defibrillators - Cardiac defibrillators-monit ors - Part 2: Maintenance | |
| Characteristics and Measurements of Ultrasonic Piezoceramic Transducers | |
| Circuit boards and circuit board assemblies \x96 Design and use \x96 Part 8: 3D shape data for CAD component library | |
| Climatic field data including validation | |
| Common automation device Profile guideline | |
| Communication networks and systems for power utility automation - Part 7-500: Basic information and communication structure - Use of logical nodes for modeling application functions and related concepts and guidelines... | |
| Communication networks and systems for power utility automation - Part 90-17: Using IEC 61850 to transmit power quality data | |
| Communication networks and systems for power utility automation - Part 90-20: Use cases of redundancy in systems | |
| Communication networks and systems for power utility automation - Part 90-2: Using IEC 61850 for communication between substations and control centres | |
| Communication networks and systems for power utility automation - Part 90-8: Object model for E-mobility | |
| Communication networks and systems for power utility automation \x96 Part 10-3: Functional testing of IEC 61850 systems | |
| Communication networks and systems for power utility automation \x96 Part 7-510: Basic communication structure \x96 Hydroelectric power plants \x96 Modelling concepts and guidelines | |
| Communication networks and systems for power utility automation \x96 Part 7-5: IEC 61850 Modelling concepts | |
| Communication networks and systems for power utility automation \x96 Part 7-6: Guideline for definition of Basic Application Profiles (BAPs) using IEC 61850 | |
| Communication networks and systems for power utility automation \x96 Part 80-3: Mapping to web protocols - Requirements and technical choices | |
| Communication networks and systems for power utility automation \x96 Part 80-5: Guideline for mapping information between IEC 61850 and IEC 61158-15 | |
| Communication networks and systems for power utility automation \x96 Part 90-10: Models for scheduling | |
| Communication networks and systems for power utility automation \x96 Part 90-11: Methodologies for modelling of logics for IEC 61850 based applications | |
| Communication networks and systems for power utility automation \x96 Part 90-12: Wide area network engineering guidelines | |
| Communication networks and systems for power utility automation \x96 Part 90-13: Deterministic networking technologies | |
| Communication networks and systems for power utility automation \x96 Part 90-14: Using IEC 61850 for FACTS (flexible alternate current transmission systems), HVDC (high voltage direct current) transmission and power conversion... | |
| Communication networks and systems for power utility automation \x96 Part 90-1: Use of IEC 61850 for the communication between substations | |
| Communication networks and systems for power utility automation \x96 Part 90-21: Travelling Wave Fault Location | |
| Communication networks and systems for power utility automation \x96 Part 90-22: SCD based substation network automated management with with visualization and supervision support | |
| Communication networks and systems for power utility automation \x96 Part 90-27: Use of IEC 61850 for thermal energy systems connected to electric power grid | |
| Communication networks and systems for power utility automation \x96 Part 90-30: IEC 61850 Function Modelling in SCL | |
| COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION \x96 Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis | |
| Communication networks and systems for power utility automation \x96 Part 90-4: Network engineering guidelines | |
| Communication networks and systems for power utility automation \x96 Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118 | |
| COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION \x96 Part 90-6: Use of IEC 61850 for Distribution Automation Systems | |
| Communication networks and systems for power utility automation \x96 Part 90-7: Object models for power converters in distributed energy resources (DER) systems | |
| Communication networks and systems for power utility automation \x96 Part 90-9: Use of IEC 61850 for Electrical Energy Storage Systems | |
| Communication networks and systems in power utility automations \x96 Part 90-16: Requirements of system management for Smart Energy Automation | |
| Communication networks and systems in substations Part 1: Introduction and overview | |
| Compression and Mechanical Connectors for Power Cables with Copper or Aluminium Conductors - Part 2: Terminal Lugs for Power Cables to Fit Equipment up to and Including 1kV - Overall... | |
| Connectors used in the field of audio, video and audiovisual engineering CORRIGENDUM 1 | |
| Connectors Used in the Field of Audio, Video and Audiovisual Engineering | |
| Considerations of unaddressed safety aspects in the Second Edition of IEC 60601-1 and proposals for new requirements | |
| Controllers for Electric Road Vehicles | |
| CORRIGENDUM 1 Part 5-2: Protection of electronic devices from electrostatic phenomena \x96 User guide | |
| Cylindrical Machined Carbon Electrodes - Nominal Dimensions | |
| Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation | |
| Design Automation - Part 1-1: Harmonization of ATLAS Test Languages | |
| Determination of long-term radiation ageing in polymers \x96 Part 4: Effects of different temperatures and dose rates under radiation conditions | |
| Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components \x96 Measurement, modelling and calculation methods | |
| Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) | |
| Digital Audio Tape (DAT) Cassette System - Part 4: Character Pack Format | |
| Digital Audio Tape Cassette System (DAT) - Part 7: DAT Logo Application Rule | |
| Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series | |
| Dimensions of Uncoated Ring Cores of Magnetic Oxides | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 1-2: General Considerations - Guide for Specification | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 1: General Considerations - Section 1: Distribution Automation System Architecture | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 1: General Considerations - Section 4: Identification of Data Transmission Parameters Concerning Medium and Low-Voltage Distribution Mains | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 5: Lower Layer Profiles - Section 1: Spread Frequency Shift Keying (S-FSK) Profile | |
| Documentation on Design Automation Subjects - Part 1: EDA Industry Standards Roadmap | |
| Documentation on Design Automation Subjects - Part 2: EIAJ-EDA Technology Roadmap Toward 2002 | |
| Dynamic modules - Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer | |
| Dynamic modules - Part 6-7: Design guide - Optical channel monitor | |
| Dynamic modules - Part 6-9: Design guide - Study of mechanisms and measurements of crosstalk in wavelength-selective switches | |
| Dynamic modules \x96 Part 6-10: Design guide \x96 Intermediate controller for multiple dynamic module systems | |
| Dynamic Modules \x96 Part 6-11: Design guidelines \x96 Software and hardware interface for optical multicast switches | |
| Dynamic modules \x96 Part 6-12: Design guidelines \x96 Survey results on performance specifications for 1 \xd7 N wavelength selective switches | |
| Dynamic modules \x96 Part 6-1: Dynamic channel equalizers | |
| Dynamic modules \x96 Part 6-2: Software and hardware interfaces \x96 Survey results | |
| Dynamic modules \x96 Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators | |
| Dynamic modules \x96 Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules | |
| Dynamic modules \x96 Part 6-6: Failure mode effect analysis for optical units of dynamic modules | |
| Dynamic modules \x96 Part 6-8: Categorization study of dynamic performance requirements | |
| Effective Area Measurements of Single-Mode Optical Fibres - Guidance | |
| Effects of Unbalanced Voltages on the Performance of Three- Phase Cage Induction Motors | |
| Electric cables Calculations for current ratings Finite element method | |
| Electrical accessories \x96 Harmonization of general rules | |
| Electrical equipment - Data for short-circuit current calculations in accordance with IEC 909 (1988) | |
| Electrical equipment of industrial machines \x96 Serial data link for real-time communication between controls and drives | |
| Electrical Installation Guide - Part 413: Protection Against Indirect Contact - Automatic Disconnection of Supply | |
| Electrical Installation Guide - Part 704: Construction and Demolition Site Installations | |
| Electrical installation guide \x96 Part 52: Selection and erection of electrical equipment \x96 Wiring systems | |
| Electrical Insulation Systems (EIS) - Electrical Stresses Produced by Repetitive Impulses - Part 2: State of the Art | |
| Electrical insulation systems \x96 Procedures for thermal evaluation \x96 Part 2: Selection of the appropriate test method for evaluation and classification of electrical insulation systems | |
| Electrical insulation systems \x96 Thermal evaluation of modifications to an established electrical insulation system (EIS) Part 3: Clarification of electrical insulating materials (EIMs) and auxiliary materials | |
| Electrical Safety - Classification of Interfaces for Equipment to Be Connected to Information and Communications Technology Networks | |
| Electricity Metering - Glossary of Terms | |
| Electricity Metering - Local and Remote Data Exchange - Applications and Performance | |
| ELECTRICITY METERING \x96 DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL \x96 GLOSSARY OF TERMS \x96 Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM CORRIGENDUM... | |
| Electricity metering \x96 Data exchange for meter reading, tariff and load control \x96 Glossary of terms \x96 Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM | |
| Electricity Metering Equipment - Dependability - Part 11: General Concepts | |
| Electricity Metering Equipment - Dependability - Part 21: Collection of Meter Dependability Data from the Field | |
| Electricity metering Payment systems Part 21: Framework for standardization | |
| Electroacoustics \x96 Measurement microphones \x96 Part 10: Absolute pressure calibration of microphones at low frequencies using calculable pistonphones | |
| Electromagnetic Compatibility (EMC) - Part 1-3: General - The Effects of High-Altitude EMP (HEMP) on Civil Equipment and Systems | |
| Electromagnetic compatibility (EMC) - Part 1-6: General \x96 Guide to the assessment of measurement uncertainty | |
| Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions | |
| Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | |
| Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 4: Compatibility Levels in Industrial Plants for Low-Frequency Conducted Disturbances | |
| Electromagnetic compatibility (EMC) - Part 2: Environment - section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances | |
| Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 7: Low Frequency Magnetic Fields in Various Environments | |
| Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 6: Assessment of Emission Limits for Distorting Loads in MV and HV Power Systems - Basic EMC Publication | |
| Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 7: Assessment of Emission Limits for Fluctuating Loads in MV and HV Power Systems - Basic EMC Publication | |
| Electromagnetic Compatibility (EMC) - Part 5-3: Installation and Mitigation Guidelines - HEMP Protection Concepts | |
| Electromagnetic Compatibility (EMC) - Part 5-6: Installation and Mitigation Guidelines - Mitigation of External EM Influences | |
| Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section 1: General Considerations Basic EMC Publication | |
| Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section 2: Earthing and Cabling | |
| Electromagnetic compatibility (EMC) \x96 Part 1-4: General \x96 Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz | |
| Electromagnetic compatibility (EMC) \x96 Part 1-6: General \x96 Guide to the assessment of measurement uncertainty | |
| Electromagnetic compatibility (EMC) \x96 Part 1-9: General \x96 Evaluation of uncertainty for the measurement of harmonic current emissions | |
| Electromagnetic compatibility (EMC) \x96 Part 2-14: Environment \x96 Overvoltages on public electricity distribution networks | |
| Electromagnetic compatibility (EMC) \x96 Part 2-5: Environment \x96 Description and classification of electromagnetic environments | |
| Electromagnetic compatibility (EMC) \x96 Part 3-13: Limits \x96 Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems CORRIGENDUM 1 | |
| Electromagnetic compatibility (EMC) \x96 Part 3-13: Limits \x96 Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems | |
| Electromagnetic compatibility (EMC) \x96 Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems | |
| Electromagnetic compatibility (EMC) \x96 Part 3-15: Limits \x96 Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network | |
| Electromagnetic compatibility (EMC) \x96 Part 3-18: Limits \x96 Assessment of network characteristics for the application of harmonic emission limits \x96 Equipment connected to LV distribution systems not covered by IEC... | |
| Electromagnetic compatibility (EMC) \x96 Part 4-1: Testing and measurement techniques \x96 Overview of the IEC 61000-4 series | |
| Electromagnetic compatibility (EMC) \x96 Part 4-35: Testing and measurement techniques \x96 HPEM simulator compendium | |
| Electromagnetic compatibility (EMC) \x96 Part 4-37: Testing and measurement techniques \x96 Calibration and verification protocol for harmonic emission compliance test systems | |
| Electromagnetic compatibility (EMC) \x96 Part 4-38: Testing and measurement techniques \x96 Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems | |
| Electromagnetic compatibility (EMC) \x96 Part 4-40: Testing and measurement techniques \x96 Digital methods for the measurement of power quantities of modulated or distorted signals | |
| Electromagnetic compatibility (EMC) Part 1-4: General Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz | |
| Electromagnetic compatibility (EMC) Part 1-5: General High power electromagnetic (HPEM) effects on civil systems | |
| Electromagnetic compatibility (EMC) Part 1: General Section 1: Application and interpretation of fundamental definitions and terms | |
| Electromagnetic compatibility (EMC) Part 2-8: Environment Voltage dips and short interruptions on public electric power supply systems with statistical measurement results | |
| Electromagnetic compatibility (EMC) Part 2: Environment Section 1: Description of the environment - electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems | |
| Electromagnetic compatibility (EMC) Part 2: Environment Section 3: Description of the environment - Radiated and non-network-frequenc y-related conducted phenomena | |
| Electromagnetic compatibility (EMC) Part 4-32: Testing and measurement techniques High-altitude electromagnetic pulse (HEMP) simulator compendium | |
| Electromagnetic compatibility \x96 Part 1-8: General \x96 Phase angles of harmonic current emissions and voltages in the public supply networks \x96 Future expectations | |
| Electromagnetic compatibility \x96 Part 2-15: Description of the characteristics of networks with high penetration of power electronic converters | |
| Electronic design automation libraries Part 3: Models of integrated circuits for EMI behavioural simulation | |
| Electronic railway equipment \x96 Train communication network (TCN) \x96 Part 2-7: Wireless Train Backbone (WLTB) | |
| Electrostatics - Part 2-2: Measurement Methods - Measurement of Chargeability | |
| Electrostatics \x96 Part 1-1: Electrostatic phenomena \x96 Measurement errors, uncertainties and expression of results | |
| ELECTROSTATICS \x96 Part 1: Electrostatic phenomena \x96 Principles and measurements | |
| Electrostatics \x96 Part 5-2: Protection of electronic devices from electrostatic phenomena \x96 User guide | |
| Electrostatics \x96 Part 5-4: Protection of electronic devices from electrostatic phenomena \x96 Compliance verification | |
| Electrostatics \x96 Part 5-5: Protection of electronic devices from electrostatic phenomena \x96 Packaging systems used in electronic manufacturing | |
| Electrostatics, Part 5.1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Electrostatics, Part 5.2: Protection of electronic devices from electrostatic phenomena - User guide | |
| Enclosed low-voltage switchgear and controlgear assemblies \x96 Guide for testing under conditions of arcing due to internal fault | |
| Environmental conditions - Vibration and shock of electrotechnical equipment - Part 5: Equipment during storage and handling | |
| Environmental conditions - Vibration and shock of electrotechnical equipment \x96 Part 6: Transportation by propeller aircraft | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 1: Process for validation of dynamic data | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 2: Equipment transported in fixed wing jet aircraft | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 3: Equipment transported in rail vehicles | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 4: Equipment transported in road vehicles | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 7: Transportation by rotary wing aircraft: | |
| Environmental conditions \x96 Vibration and shock of electrotechnical equipment \x96 Part 8: Transportation by ship | |
| Environmental statement specific to IEC TC 20 \x96 Electric cables | |
| Equipment for general lighting purposes \x96 EMC immunity requirements \x96 Part 1: An objective voltage fluctuation immunity test method | |
| Equipment for general lighting purposes \x96 EMC immunity requirements \x96 Part 1: Objective light flickermeter and voltage fluctuation immunity test method | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 1: General Aspects | |
| Extra-Low Voltage (ELV) - Limit Values | |
| Fibre Optic - Terminology | |
| Fibre optic active components and devices \x96 Test and measurement procedures \x96 Part 7: Calculation methodology of laser safety class for optical transceivers and transmitters | |
| Fibre Optic Communication System Design Guide - Part 3: Calculation of Polarization Mode Dispersion | |
| Fibre optic communication system design guidelines \x96 Part 14: Determination of the uncertainties of attenuation measurements in fibre plants | |
| Fibre optic communication system design guidelines \x96 Part 16: Coherent receivers and transmitters with high-speed digital signal processing | |
| Fibre Optic Communication System Design Guides - Part 1: Single-Mode Digital and Analogue Systems | |
| Fibre Optic Communication System Design Guides - Part 5: Accommodation and Compensation of Dispersion | |
| Fibre Optic Communication System Design Guides - Part 7: Statistical Calculation of Chromatic Dispersion | |
| Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory | |
| Fibre optic communication system design guides \x96 Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude | |
| Fibre optic communication system design guides \x96 Part 11: Multimode launch conditions | |
| Fibre optic communication system design guides \x96 Part 12: In-band optical signal-to-noise ratio (OSNR) | |
| Fibre optic communication system design guides \x96 Part 13: Guidance on in-service PMD and CD characterization of fibre optic links | |
| Fibre optic communication system design guides \x96 Part 14: Determination of the uncertainties of attenuation measurements in fibre plants | |
| Fibre optic communication system design guides \x96 Part 15: Cable plant and link \x96 Testing multi-fibre optic cable plant terminated with MPO connectors | |
| Fibre optic communication system design guides \x96 Part 8: Calculating dispersion penalty from measured time-resolved chirp data | |
| Fibre optic communication system design guides Part 2: Multimode and single-mode Gbit/s applications Gigabit ethernet model | |
| Fibre optic communication system design guides Part 4: Accommodation and utilization of non-linear effects | |
| Fibre optic communication system design guides Part 6: Skew design in parallel optical interconnection systems | |
| Fibre Optic Graphical Symbology | |
| Fibre Optics - Parameters of Amplifier Components | |
| Fire performance of communication cables installed in buildings | |
| Fire-Resistance Tests - Contribution Made by Suspended Ceilings to the Protection of Steel Beams in Floor and Roof Assemblies First Edition | |
| Fossil-fired steam power stations Part 1: Limiting controls | |
| Fossil-fired steam power stations Part 2: Drum-level control | |
| Fossil-fired steam power stations Part 3: Steam-temperature control | |
| Framework for energy market communications \x96 Part 103: Review of information exchanges within the deregulated European style retail energy market from a CIM perspective | |
| Framework for energy market communications Part 101: General guidelines | |
| Framework for energy market communications Part 102: Energy market model example | |
| Framework for energy market communications Part 501: General guidelines for use of ebXML | |
| Fuel cell technologies \x96 Part 7-3: Test methods \x96 Status of accelerated tests for fuel cell stacks and components and perspectives for standardization | |
| Function Blocks (FB) for Process Control - Part 4: EDD Interoperability Guideline | |
| Function blocks (FB) for process control \x96 Electronic device description language (EDDL) \x96 Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices | |
| Function blocks (FB) for process control \x96 Part 4: EDD interoperability guideline | |
| Function blocks for industrial-process measurement and control systems Part 3: Tutorial information | |
| Functional safety \x96 Safety instrumented systems for the process industry sector \x96 Part 0: Functional safety for the process industry and IEC 61511 | |
| Functional safety \x96 Safety instrumented systems for the process industry sector \x96 Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2 | |
| Functional safety of electrical/electroni c/ programmable electronic safety-related systems Part 0: Functional safety and IEC 61508 | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems \x96 Part 3-3: Object-oriented software in safety-related systems | |
| General testing procedures for medical electrical equipment | |
| Glass Bulb Designation System for Lamps | |
| Graphical symbols for electrical equipment in medical practice | |
| Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals | |
| Guidance for the correct use of residual currentoperated protective devices (RCDs) for household and similar use | |
| Guidance for the interpretation of OTDR backscattering traces | |
| Guidance of measurement methods and test procedures \x96 Basic tests for polarization-maintai ning optical fibres | |
| Guidance On Terms for Connectors and Mechanical Structures in Electronic Equipment | |
| Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery | |
| Guide for a Test Procedure for the Measurement of Loss Tangent of Coils and Bars for Machine Windings | |
| Guide for the Selection of Insulators in Respect of Polluted Conditions | |
| Guide for the Use of Monitor Systems for Lead-Acid Traction Batteries | |
| Guide on Methods of Measurement of Short Duration Transients on Low Voltage Power and Signal Lines | |
| Guidelines for Administrative, Medical, and Nursing Staff Concerned with the Safe Use of Medical Electrical Equipment | |
| Guidelines for Application of Analytical Test Methods for Thermal Endurance Testing of Electrical Insulating Materials | |
| Guidelines for combining different single-mode fibre sub-categories | |
| Guidelines for Radiotherapy Treatment Rooms Design | |
| Guidelines for the addition of environmental aspects in product standards specific to TC23 | |
| Guidelines for the Development and Use of Medical Electrical Equipment Educational Materials | |
| Guidelines for the User Interface in multimedia Equipment for General Purpose Use | |
| Handbook of Audio and Video Symbols | |
| Health informatics \x97 Standardizing graphical content | |
| High frequency surgical equipment - Part 1: Operation | |
| High frequency surgical equipment - Part 2: Maintenance | |
| High frequency surgical equipment \x96 Operation and maintenance | |
| High frequency surgical equipment and high frequency surgical accessories \x96 Operation and maintenance | |
| High Pressure Xenon Short Arc Lamps - Dimensional, Electrical and Photometric Data and Cap Types | |
| High- voltage switchgear and controlgear \x96 Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above... | |
| High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 3: Modelling | |
| High-voltage direct current (HVDC) systems \x96 Guidance to the specification and design evaluation of AC filters \x96 Part 1: Overview | |
| High-voltage direct current (HVDC) systems \x96 Guidance to the specification and design evaluation of AC filters \x96 Part 2: Performance | |
| High-voltage direct current (HVDC) systems \x96 Guidance to the specification and design evaluation of AC filters \x96 Part 4: Equipment | |
| High-voltage direct current (HVDC) systems \x96 Guidance to the specification and design evaluation of AC filters \x96 Part 5: AC side harmonics and appropriate harmonic limits for HVDC systems with... | |
| High-voltage direct current (HVDC) systems \x96 Guidebook to the specification and design evaluation of A.C. filters | |
| High-voltage switchgear and controlgear - Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1... | |
| High-Voltage Switchgear and Controlgear - Part 308: Guide for Asymmetrical Short-Circuit Breaking Test Duty T100a | |
| High-Voltage Switchgear and Controlgear - The Use of Electronic and Associated Technologies in Auxiliary Equipment of Switchgear and Controlgear | |
| High-Voltage Switchgear and Controlgear - Use and Handling of Sulphur Hexafluoride (SF6) in High-Voltage Switchgear and Controlgear | |
| High-voltage switchgear and controlgear . Part 310: Electrical endurance testing for circuit-breakers of rated voltage 72,5 kV and above | |
| High-voltage switchgear and controlgear \x96 Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations | |
| High-voltage switchgear and controlgear \x96 Part 300: Seismic qualification of alternating current circuit-breakers | |
| High-voltage switchgear and controlgear \x96 Part 302: Alternating current circuit-breakers with intentionally non-simultaneous pole operation | |
| High-voltage switchgear and controlgear \x96 Part 303: Use and handling of sulphur hexafluoride (SF6) | |
| High-voltage switchgear and controlgear \x96 Part 305: Capacitive current switching capability of air-insulated Disconnectors for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers | |
| High-voltage switchgear and controlgear \x96 Part 312: Guidance for the transferability of type tests of high-voltage/low-vol tage prefabricated substations | |
| High-voltage switchgear and controlgear Part 301: Dimensional standardisation of terminals | |
| High-Voltage Testing Techniques with Very Fast Impulses - Part 1: Measuring Systems for Very Fast Front Overvoltages Generated in Gas-Insulated Substations | |
| Household Electrical Appliances - Guidelines for Consumer Panel Testing | |
| Household Electrical Appliances - Method of Measuring Performance - Assessment of Repeatability and Reproducibility | |
| Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 6: Listening tests on loudspeakers Single stimulus ratings and paired comparisons | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 1: General and Annexes | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 2: Guidelines for Technical Specifications for Francis Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 3: Guidelines for Technical Specifications for Pelton Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 4: Guidelines for Technical Specifications for Kaplan and Propeller Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 5: Guidelines for Technical Specifications for Tubular Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 6: Guidelines for Technical Specifications for Pump-Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 7: Guidelines for Technical Specifications for Storage Pumps | |
| Industrial Systems, Installations and Equipment and Industrial Products - Structuring Principles and Reference Designations - Part 3: Application Guidelines | |
| Industrial Systems, Installations and Equipment and Industrial Products - Structuring Principles and Reference Designations Part 4: Discussion of Concepts | |
| Instrument transformers - Part 100: Guidance for application of current transformers in power system protection | |
| INSTRUMENT TRANSFORMERS \x96 Part 100: Guidance for application of current transformers in power system protection | |
| Instrument transformers \x96 Part 102: Ferroresonance oscillations in substations with inductive voltage transformers | |
| Instrument transformers \x96 The use of instrument transformers for power quality measurement | |
| Insulating Liquids - Determination of the Partial Discharge Inception Voltage (PDIV) - Test Procedure | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values | |
| Integrated circuits . Measurement of electromagnetic emissions, 150 kHz to 1 GHz . Part 4-1: Measurement of conducted emissions - 1 Ohm/150 Ohm direct coupling method - Application guidance to... | |
| Integrated circuits \x96 Measurement of electromagnetic emissions \x96 Part 1-1: General conditions and definitions \x96 Near-field scan data exchange format | |
| Interconnection of Radio and TV Receivers to Feeder System Outlets | |
| Investigations on Test Procedures for Ultrasonic Cleaners | |
| Live Working - Guidelines for Dielectric Testing of Tools and Equipment | |
| Live Working - Installation of Transmission Line Conductors and Earthwires - Stringing Equipment and Accessory Items | |
| Live working - Voltage detectors - Part 6: Guidelines on non-contact voltage detectors (NCVD) for use at nominal voltages above 1 kV AC | |
| Live working Guidelines for the installation and maintenance of optical fibre cables on overhead power lines | |
| Live working Guidelines for the installation of distribution line conductors Stringing equipment and accessory items | |
| Long-Term Radiation Ageing in Polymers - Part 3: Procedures for In-Service Monitoring of Low-Voltage Cable Materials | |
| Low voltage supply earthing systems | |
| Low-Voltage Fuses - Coordination between Fuses and Contactors/Motor-Sta rters - Application Guide | |
| Low-voltage surge protective devices \x96 Part 03: SPD testing guide | |
| Low-voltage switchgear and controlgear \x96 Over-current protective devices \x96 Part 2: Selectivity under over-current conditions | |
| Low-voltage switchgear and controlgear \x96 Overcurrent protective devices \x96 Part 1: Application of short-circuit ratings | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 0: Guidance to specifying assemblies | |
| Magnetic Properties of Magnetically Hard Materials at Elevated Temperatures - Methods of Measurement | |
| Mapping between the clauses of the third edition of IEC 60601-1 and the 1988 edition as amended | |
| Measurement Techniques and Operational Adjustments of Broadcast VTRs Part 1: Operational Adjustments on Analogue Composite Broadcast VTRs | |
| Measurement Techniques and Operational Adjustments of Broadcast VTRs Part 2: Special Mechanical Measurements and Alignments | |
| Medical devices \x96 Part 2: Guidance on the application of usability engineering to medical devices | |
| Medical Electrical Equipment - Digital Imaging and Communications in Medicine (DICOM) - Radiotherapy Objects | |
| Medical Electrical Equipment - Guidelines for Implementation of DICOM Radiotherapy | |
| Medical electrical equipment \x96 Medical electron accelerators \x96 Guidelines for functional performance characteristics | |
| Medical electrical equipment Glossary of defined terms | |
| Metallic communication cable test methods \x96 Part 4-1: Electromagnetic compatibility (EMC) \x96 Introduction to electromagnetic (EMC) screening measurements | |
| Method for Assessing the Short-Circuit Withstand Strength of Partially Type-Tested Assemblies (PTTA) | |
| Method for Verifying Accuracy of Tan Delta Measurements Applicable to Capacitors | |
| Method of Measurement of Centre Beam Intensity and Beam Angle(s) of Reflector Lamps | |
| Methods of Measuring the Performance of Ultrasonic Pulse-Echo Diagnostic Equipment | |
| Mineral insulating oils \x96 Characterization of paraffinic/naphtheni c nature \x96 Low temperature differential scanning calorimetry (DSC) test method | |
| Mineral insulating oils \x96 Oxidation stability test method based on differential scanning calorimetry (DSC) | |
| Mnemonics and Symbols for Integrated Circuits | |
| Mobile and portable DVB-T/H radio access \x96 Part 3: Measurement Interface | |
| Mobile and portable DVB-T/H radio access \x96 Part 4: Measurement methods for total radiated sensitivity in hand-held broadcast terminals | |
| Model and framework for standardization in multimedia equipment and systems | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Nominal DC-resistance values of floor-wiring and work-area cables for digital communications | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-5: Correction procedures for the measurement results of return loss and input impedance | |
| Multimedia Data Storage - Application Program Interface for UDF Based File Systems | |
| Multimedia systems and equipment Quality assessment Audio-video communication systems | |
| Nomenclature for Hydroelectric Powerplant Machinery | |
| Non-Linear Coefficient Measuring Methods - Application Guide | |
| Nuclear facilities Instrumentation and control systems important to safety Systems of interim storage and final repository of nuclear fuel and waste | |
| Nuclear Instrumentation - A Review of the Application of IEC 60880 (1986) | |
| Nuclear Instrumentation - Guidelines for Selection of Metrologically Supported Nuclear Radiation Spectrometry Systems | |
| Nuclear Medicine Instrumentation - Routine Tests - Part 1: Radiation Counting Systems | |
| Nuclear Medicine Instrumentation - Routine Tests - Part 2: Scintillation Cameras and Single Photon Emission Computed Tomography Imaging | |
| Nuclear medicine instrumentation \x96 Routine tests \x96 Part 4: Radionuclide calibrators | |
| Nuclear medicine instrumentation Routine tests Part 3: Positron emission tomographs | |
| Nuclear Power Plants - Instrumentation and Control Functions Important for Safety - Use of Probabilistic Safety Assessment for the Classification | |
| Nuclear power plants Instrumentation and control Guidance for the decision on modernization | |
| Nuclear power plants Main control room Comparison of IEC 60964 to similar standards on control room design | |
| Nuclear power plants Main control room design A review of the application of IEC 60964 (1989) | |
| Nuclear Radiation - Fibre Optic Guidance | |
| Numerical Control of Machines - Operational Command and Data Format | |
| On-Line Analyser Systems - Guide to Design and Installation | |
| Opportunity charging of lead-acid traction batteries | |
| Optical Amplifier Technical Reports - Part 2: Theoretical Background for Noise Figure Evaluation Using the Electrical Spectrum Analyzer | |
| Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers | |
| Optical amplifiers \x96 Part 12: Fibre amplifiers for space division multiplexing transmission | |
| Optical amplifiers \x96 Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers | |
| Optical amplifiers \x96 Part 6: Distributed Raman amplification | |
| Optical amplifiers \x96 Part 7: Four wave mixing effect in optical amplifiers | |
| Optical amplifiers \x96 Part 8: High-power amplifiers | |
| Optical amplifiers \x96 Part 9: Semiconductor optical amplifiers (SOAs) | |
| Optical amplifiers Part 3: Classification, characteristics and applications | |
| Optical amplifiers Part 5: Polarization mode dispersion parameter General information | |
| Optical Fibres - Measurement Methods - Bend Loss for A3 and A4 Type Fibres | |
| Optical Fibres - Measurement Methods - Microbending Sensitivity | |
| Optical fibres \x96 Reliability \x96 Power law theory | |
| Overhead Electrical Conductors - Calculation Methods for Stranded Bare Conductors | |
| Overvoltages in Traction Supply Systems | |
| Performance of high-voltage d.c. (HVDC) systems - Part 2: Faults and switching | |
| Performance of high-voltage d.c. (HVDC) systems Part 1: Steady-state conditions | |
| Performance of high-voltage direct current (HVDC) systems with line-commutated converters \x96 Part 1: Steady-state conditions | |
| Performance of high-voltage direct current (HVDC) systems with line-commutated converters \x96 Part 3: Dynamic conditions | |
| Photovoltaic devices \x96 Part 14: Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions | |
| Pin Allocations for Microprocessor Systems Using the IEC 603-2 Connector | |
| Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part 3: Safety Recommendations for Use in Electric Appliances | |
| Possible safety and health hazards in the use of alkaline secondary cells and batteries \x96 Guide to equipment manufacturers and users | |
| Power System Control and Associated Communications - Deregulated Energy Market Communications | |
| Power system control and associated communications Data and communication security | |
| Power system control and associated communications Reference architecture for object models, services and protocols | |
| Power systems management and associated information exchange - Data and communications security - Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems | |
| Power systems management and associated information exchange - Data and communications security - Part 13: Guidelines on security topics to be covered in standards and specifications | |
| Power systems management and associated information exchange - Data and communications security - Part 90-1: Guidelines for handling role-based access control in power systems | |
| Power systems management and associated information exchange - Interoperability in the long term \x96 Part 103: Standard profiling | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 10: Security architecture guidelines | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 90-2: Deep packet inspection of encrypted communications | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 90-3: Guidelines for network and system management | |
| Power systems management and associated information exchange \x96 Part 1: Reference architecture | |
| Power systems management and associated information exchange \x96 Part 200: Guidelines for migration from Internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6) | |
| Power systems management and associated information exchange \x96 Part 2: Use cases and role models | |
| Pre-Heat Requirements for Starterless Tubular Fluorescent Lamps | |
| Preparation of Documents Used in Electrotechnology - Part 6: Index | |
| Primary Batteries - Summary of Research and Actions Limiting Risks to Reversed Installation of Primary Batteries | |
| Printed board assemblies \x96 Part 7: Technical cleanliness of components and printed board assemblies | |
| Printed board assemblies \x96 Part 8: Voiding in solder joints of printed board assemblies for use in automotive electronic control units \x96 Best practices | |
| Printed board assemblies \x96 Part 9: Electrochemical reliability and ionic contamination on printed circuit board assemblies for use in automotive applications \x96 Best practices | |
| Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service | |
| Process Data Highway, Types A and B (PROWAY A and B), for Distributed Process Control Systems | |
| Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating | |
| Process management for avionics - Electronic components capability in operation - Part 2: Semiconductor microcircuit lifetime | |
| Process management for avionics \x96 Electronic components capability in operation \x96 Part 1: Temperature uprating | |
| Process management for avionics Use of semiconductor devices outside manufacturers\xb4 specified temperature range | |
| Programmable Controllers - Part 4: User Guidelines First Edition | |
| Programmable Controllers - Part 8: Guidelines for the Application and Implementatin of Programming Languages | |
| Protection Against Lightning Electromagnetic Impulse - Part 4: Protection of Equipment in Existing Structures | |
| Provisional Head and Torso Simulator for Acoustic Measurements on Air Conduction Hearing Aids | |
| Pulsed field magnetometry | |
| Radiation protection instrumentation \x96 Radon and radon decay product measuring instruments \x96 Part 5: General properties of radon and radon decay products and their measurement methods | |
| Radio-Frequency Cables - Relationship between Surface Transfer Impedance and Screening Attenuation (A Background to the Recommended Limits Contained in IEC 61196-1, Clause 14) | |
| Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) - Part 4: RAM risk and RAM life cycle aspects | |
| Railway applications \x96 Automated urban guided transport (AUGT) \x96 Safety requirements \x96 Part 2: Hazard analysis at top system level | |
| Railway applications \x96 Specification and demonstration of reliability, availability, maintainability and safety (RAMS) \x96 Part 3: Guide to the application of IEC 62278 for rolling stock RAM | |
| RBMK Nuclear Reactors - Proposals for Instrumentation and Control Improvements | |
| Reed switches \x96 Part 3: Reliability data for reed switch-devices in typical safety applications | |
| Reliability data handbook Universal model for reliability prediction of electronics components, PCBs and equipment | |
| Residual Strength of String Insulator Units of Glass or Ceramic Material for Overhead Lines After Mechanical Damage of the Dielectric | |
| Resistance to Rusting of Protected Steel Surfaces - Assessment Test | |
| Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112 CORRIGENDUM 1 | |
| Results of the Round Robin Series of Tests to Evaluate Proposed Amendments to IEC 60112 CORRIGENDUM 2 | |
| Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112 | |
| ROPE, MILDEW-RESISTANT | |
| Safety of Hand-Held Motor-Operated Electric Tools - Particular Requirements for Drills - Test Procedure Concerning Dynamic Forces at Sudden Stalling | |
| Safety of Laser Products - Part 10: Application Guidlines and Explanatory Notes to IEC 60825-1 | |
| Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems | |
| Safety of laser products - Part 3: Guidance for laser displays and shows | |
| Safety of Laser Products - Part 5: Manufacturer\xb4s Checklist for IEC 60825-1 | |
| Safety of Laser Products - Part 8: Guidelines for the Safe Use of Medical Laser Equipment | |
| Safety of Laser Products - Part 9: Compilation of Maximum Permissible Exposure to Incoherent Optical Radiation | |
| Safety of laser products \x96 Part 13: Measurements for classification of laser products | |
| Safety of laser products Part 14: A user\xb4s guide | |
| Safety of machinery \x96 Electro-sensitive protective equipment \x96 Part 4: Particular requirements for equipment using vision based protective devices (VBPD) | |
| Safety requirements for electrical equipment for easurement, control, and laboratory use \x96 Part 3-031: Conformity verification report for IEC 61010-031:2002 \x96 Safety requirements for hand-held probe assemblies for electrical test... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010, Particular Requirements for Laboratory Equipment for the Heating of Materials... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-020: Conformity Verification Report for IEC 61010-2-020: 1992 Particular Requirements for Laboratory Centrifuges | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-032: Conformity Verification Report for IEC 61010-2-032: 1994, Particular Requirements for Hand-Held Current Clamps for Electrical Measurement... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-041: Conformity Verification Report for IEC 61010-2-041: 1995, Particular Requirements for Autoclaves Using Steam for the Treatment... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-042: Conformity Verification Report for IEC 61010-2-042: 1997, Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-043: Conformity Verification Report for IEC 61010-2-043:1997 - Particular Requirements for Dry Heat Sterilizers Using Either Hot... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051, Particular Requirements for Laboratory Equipment for Mixing and Stirring | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-061: Conformity Verification Report for IEC 61010-2-061, Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-1: Conformity Verification Report for IEC 61010-1 | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3: Protocol for the Preparation of Conformity Verification Reports for the IEC 61010 Series | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Conformity verification report for IEC 61010-2-045:2000 \x96 Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use \x96 Part 3-101: Conformity verification report for IEC 61010-2-101:2002 \x96 Particular requirements for in vitro diagnostic (IVD) medical equipment... | |
| Safety requirements for electrical equipment for Part 3-081: Conformity verification report for IEC 61010-2-081:2001 \x96 Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes | |
| Secondary Cells and Batteries - Monitoring of Lead Acid Stationary Batteries - User Guide | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes Design and manufacturing recommendations for portable batteries made from sealed secondary cells | |
| Selection guidelines for polymeric materials for outdoor use under HV stress | |
| Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics \x96 Guidance | |
| Semiconductor Convertors Identification Code for Convertor Connections | |
| Semiconductor die products \x96 Part 4: Questionnaire for die users and suppliers | |
| Semiconductor die products \x96 Part 7: XML schema for data exchange | |
| Semiconductor die products \x96 Part 8: EXPRESS model schema for data exchange | |
| Semiconductor die products Part 3: Recommendations for good practice in handling, packing and storage | |
| Short-circuit currents - Calculation of effects - Part 2: Examples of calculation | |
| Short-Circuit Currents in d.c. Auxiliary Installations in Power Plants and Substations - Part 3: Examples of Calculations | |
| Short-Circuit Currents in Three-Phase a.c. Systems - Part 1: Factors for the Calculation of Short-Circuit Currents According to IEC 60909-0 | |
| Short-Circuit Currents in Three-Phase a.c. Systems - Part 4: Examples for the Calculation of Short-Circuit Currents | |
| Single-mode fibre compatibility guidelines | |
| Single-Mode Optical Fibres - Raman Gain Efficency Measurement using Continuous Wave Method - Guidance | |
| Standard Data Element Types with Associated Classification Scheme for Electric Components - Part 3: Maintenance and Validation Procedures | |
| Suitability of typical electrical insulating material (EIM) for polymer recycling | |
| Superconductivity \x96 Part 20: Superconducting wires \x96 Categories of practical superconducting wires \x96 General characteristics and guidance | |
| Surface mounting technology \x96 Part 3-1: Standard method for the specification of components for through hole reflow (THR) soldering \x96 Guidelines for through hole diameter design with solder paste surface... | |
| Surface mounting technology \x96 Part 5-1: Surface strain on circuit boards \x96 Strain gauge measurement applied to chip components | |
| Surge Overvoltages and Surge Protection in Low-Voltage a.c. Power Systems - General Basic Information | |
| Technical Report No. 61 Steam In Place | |
| Technical Report No. 62 Recommended Practices for Manual Aseptic Processes | |
| Telecontrol Equipment and Systems - Part 1-5: General Considerations - Influence of Modem Transmission Procedures with Scramblers on the Data Integrity of Transmission Systems Using the Protocol IEC 60870-5 | |
| Telecontrol Equipment and Systems - Part 1: General Considerations - Section 4: Basic Aspects of Telecontrol Data Transmission and Organization of Standards IEC 870-5 and IEC 870-6 | |
| Telecontrol Equipment and Systems - Part 6-505: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - TASE.2 User Guide | |
| Telecontrol equipment and systems Part 1: General considerations Section 3: Glossary | |
| Telecontrol Equipment and Systems Part 1: General Considerations Section One - General Principles | |
| Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 1: Application context and organization of standards | |
| Terminology in the area of information structures, documentation and graphical symbols | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 3-914: Test method for thermal conductivity of printed circuit boards for high-brightness LEDs \x96 Guidelines... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies \x96 Part 5-506: General test methods for materials and assemblies \x96 An intercomparison evaluation to implement the... | |
| Textile Floor Coverings - Tetrapod Walker Apparatus - Constructional Details and Instructions for Use First Edition | |
| The technology roadmap for industry data dictionary structure, utilization and implementation | |
| TR60 Electrochemical tests for reinforcement corrosion | |
| TR61 Enhancing reinforced concrete durability | |
| Ultrasonics - Fields - Guidance for the Measurement and Characterization of Ultrasonic Fields Generated by Medical Ultrasonic Equipment Using Hydrophones in the Frequency Range 0,5 MHz to 15 MHz | |
| Ultrasonics \x96 Real-time pulse-echo systems \x96 Test procedures to determine performance specifications | |
| Upper Frequency Limit of R.F. Coaxial Connectors | |
| Wasp and Hornet Spray | |
| Wind energy generation systems \x96 Part 12-4: Numerical site calibration for power performance testing of wind turbines | |
| Wind energy generation systems \x96 Part 21-3: Measurement and assessment of electrical characteristics \x96 Wind turbine harmonic model and its application | |
| Wind Turbine Generator Systems - Part 24: Lightning Protection |
| << Prev | Next >> |