Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1490
1500
1510
1520
1530
1540
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Acoustic properties of building elements and of buildings - Laboratory measurement of the impact sound insulation of stairs and stair isolating elements | |
| Adhesives for floor coverings - Preparation of adhesive application - Test methods for the determination of corresponding humidity of mineral substrates | |
| ADI. MESSAGE. SALES DATA REPORT MESSAGE (SLSRPT). | |
| Agricultural and forestry machinery - Installation of lighting and light signalling devices on mounted implements | |
| Agricultural machinery - Trailers - Safety | |
| Agricultural machinery - Trailers with tipping body - Safety | |
| Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements | |
| Algae and algae products - Measurement for renewable algal raw material for energy and non-energy applications | |
| Algae and algae products - Methods of sampling and analysis - Determination of chlorophyll a content | |
| Algae and algae products - Methods of sampling and analysis - Determination of total lipids content using the Ryckebosch-Foubert method | |
| Algae and algae products - Sampling - Guidelines for the definition of sampling programs and sampling protocols | |
| Algae and algae products - Terms and definitions | |
| Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties | |
| Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications | |
| Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) | |
| Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications | |
| Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions | |
| Ambient air - Determination of the particle number concentration of atmospheric aerosol | |
| Ambient air - Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters | |
| Ambient air - Standard method for measurement of NO3\xaf, SO4\xb2\xaf, Cl\xaf, NH4+, Na+, K+, Mg\xb2+, Ca\xb2+ in PM2,5 as deposited on filters | |
| Anaesthetic reservoir bags (ISO 5362:2000, modified) | |
| Animal feeding stuff: Methods of sampling and analysis - Determination of intact glucosinolates in feed materials and compound feed by LC-MS/MS | |
| Animal feeding stuffs - Methods of sampling and analysis - Determination of pyrrolizidine alkaloids in animal feeding stuff by LC-MS/MS | |
| Animal feeding stuffs. Methods of sampling and analysis - Determination of iodine in animal feed by ICP-MS | |
| Animal feeding stuffs: Methods of sampling and analysis - Detection of tylosin, spiramycin and virginiamycin - Thin Layer Chromatography and bioautography | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of carbadox and olaquindox by HPLC/UV | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method) | |
| Animal feeding stuffs: Methods of sampling and analysis - Identification of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-additive levels in compound feed - Confirmatory analysis by LC-MS | |
| Animal feeding stuffs: Methods of sampling and analysis - Predictive equations for metabolizable energy in feed materials and compound feed (pet food) for cats and dogs including dietetic food | |
| Animal feeding stuffs: Methods of sampling and analysis - Screening on the antibiotics tylosin, virginiamycin, spiramycin, bacitracin-zinc and avoparcin at sub-additive levels in compound feed by a microbiological plate test... | |
| Antimicrobial wound dressings - Requirements and test method | |
| Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods. (Consolidated version) | |
| Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods | |
| Assistance dogs - Part 1: Vocabulary (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2024.) | |
| Assistance dogs - Part 2: Dog lifetime welfare (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Assistance dogs - Part 4: Pre-training, training and tasks (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Assistance dogs - Part 6: Accessibility and Universal Access (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Automotive fuels - Determination of content of butoxy-benzene in middle distillates - Gas chromatographic method using a flame ionization detector (GC-FID) | |
| Automotive fuels - Determination of hydrocarbon group types and select hydrocarbon and oxygenate compounds - Gas chromatography with vacuum ultraviolet absorption spectroscopy (GC-VUV) method | |
| Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid methyl Esters (FAME) - Method by GC-FID | |
| Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE | |
| BDS: QUARTZ CRYSTAL CONTROLLED OSCILLATORS (CAPABILITY APPROVAL). (Endorsed by AENOR in September of 1996.) | |
| Bio-based products - Requirements for Business-to-Consumer communication and claims | |
| BLANK DETAIL SPECIFICATION: CONNECTORES FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY III. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES: ENVIRONMENTAL CATEGORY II. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY I. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY IV. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY V. (Endorsed by AENOR in November of 1997.) | |
| Blast chillers and freezers cabinets for professional use - Classification, requirements and test conditions | |
| BODY-PIERCING POST ASSEMBLIES. REFERENCE TEST METHOD FOR DETERMINATION OF NICKEL CONTENT BY FLAME ATOMIC ABSORPTION SPECTROMETY. | |
| Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods | |
| Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware | |
| Building information modelling (BIM) - Semantic modelling and linking (SML) - Part 2: Domain-specific modelling patterns (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2024.) | |
| Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification | |
| Candle accessories - Specification for fire safety and product safety labels (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2025.) | |
| Candle Accessories - Specification for fire safety and product safety labels (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2023.) | |
| Carrier cycles - Part 1: Terms and definitions | |
| Carrier Cycles - Part 2: Lightweight single track carrier cycles - Mechanical aspects | |
| Carrier Cycles - Part 3: Lightweight multi track carrier cycles - Mechanical aspects | |
| Carrier cycles - Part 5: Electrical aspects | |
| Carrier cycles - Part 7: Cargo trailers | |
| Chemical disinfectants and antiseptics - Hygienic handrub virucidal - Test method and requirements (phase 2/step 2) | |
| Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements... | |
| Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of sporicidal activity against Clostridioides difficile on non-porous surfaces with mechanical action employing wipes in the medical area (4-field... | |
| Chemical used for treatment of water intended for human consumption - Antifouling for membranes - Sulphamic acid | |
| Chemicals used for treatment of water intended for human consumption - Aluminium chloride anhydrous, aluminium chloride basic, dialuminium chloride pentahydroxide and aluminium chloride hydroxide sulfate | |
| Child protective products - Consumer fitted child resistant locking devices for cupboards and drawers - Safety requirements and test methods | |
| Chimneys - Components - Concrete flue blocks | |
| Chimneys - Components - Concrete flue liners | |
| Circular design of fishing gear and aquaculture equipment - Part 1: general requirements and guidelines (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Circular design of fishing gear and aquaculture equipment - Part 2: User manuals and labelling (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Circular design of fishing gear and aquaculture equipment - Part 3: Technical requirements and guidelines (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Circular design of fishing gear and aquaculture equipment - Part 4: Environmental and circularity requirements and guidelines (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Circular design of fishing gear and aquaculture equipment - Part 6: Requirements and guidelines for digitalization of information of components of fishing gear and aquaculture equipment. (Endorsed by Asociaci\xf3n Espa\xf1ola... | |
| Circular design of fishing gear and aquaculture equipment \x97 Part 5: Circular business models (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Commercial beverage coolers - Classification, requirements and test conditions | |
| Common security requirements for radio equipment - Part 1: Internet connected radio equipment | |
| Common security requirements for radio equipment - Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment | |
| Common security requirements for radio equipment - Part 3: Internet connected radio equipment processing virtual money or monetary value | |
| Competency for Customs Representatives | |
| Complementary product category rules for gypsum-based construction products | |
| Components for BAC Control Loop - Sensors - Part 1: Room temperature sensors | |
| Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings | |
| Conservation of Cultural Heritage - Artificial ageing by simulated solar radiation of the surface of untreated or treated porous inorganic materials | |
| Conservation of cultural heritage - Desalination of porous inorganic materials by poultices | |
| Conservation of Cultural Heritage - Specifications for the management of moveable cultural heritage collections | |
| Conservation of Cultural Heritage - Waterlogged archaeological wood - Characterization of waterlogged archaeological wood to support decision-making processes for its preservation | |
| Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma mass spectrometry (ICP-MS) | |
| Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates | |
| Construction products: Assessment of release of dangerous substances - Analysis of organic substances in eluates | |
| Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests | |
| Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis | |
| Construction products: Assessment of release of dangerous substances - Determination of biocide residues using liquid chromatography with mass spectrometric detection (LC-MS/MS) | |
| Construction products: Assessment of release of dangerous substances - Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX) - Gas chromatographic method... | |
| Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances | |
| Cosmetics - Analytical methods - HPLC/UV method for the identification and assay of hydroquinone, ethers of hydroquinone and corticosteroids in skin whitening cosmetic products | |
| Curtain walling - Environmental Product Declarations - Product category rules for curtain walling | |
| Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling (Endorsed by AENOR in June of 2000.) | |
| Detail Specification: High density rectangular connectors, round removable crimp contacts (Endorsed by AENOR in June of 2000.) | |
| Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable (Endorsed by AENOR in June of 2000.) | |
| Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality (Endorsed by AENOR in June of... | |
| Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air | |
| Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete | |
| Devices for in-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis | |
| Devices for in-situ generation of biocides - Ozone | |
| District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in... | |
| District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 2: Requirements and test methods for bonded systems with plastic service pipes (Endorsed by... | |
| District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 3: Requirements and test methods for non bonded systems with plastic service pipes (Endorsed... | |
| Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods | |
| DOMESTIC FURNITURE. BEDS AND MATTRESSES. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Domestic swimming pools - Environmental performance efficiency - Performance evaluation, methodology, and classification of the use of outdoor pools and their equipment | |
| Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design | |
| Ductile iron pipes - Push-in joints for ductile iron pipe systems - Resistance against root penetration - Requirements and test methods | |
| Dynamic mixers and agitators - Definitions and hydraulic characterizations | |
| EDI. MESSAGE. FORWARDING AND TRANSPORT RATE INFORMATION MESSAGE (IFTRIN). | |
| EDI. MESSAGE. FORWARDING AND TRANSPORT SCHEDULE AND AVAILABILITY INFORMATION MESSAGE (IFTSAI). | |
| EDI. MESSAGE. INTERNATIONAL MULTIMODAL STATUS REPORT MESSAGE (IFTSTA). | |
| EDI. MESSAGE. INVOICE MESSAGE (INVOIC). | |
| EDI. MESSAGE. PRICE/SALES CATALOGUE MESSAGE (PRICAT). | |
| EDI. MESSAGE. QUALITY DATA MESSAGE (QALITY). | |
| EDI. MESSAGE. QUOTE MESSAGE (QUOTES). | |
| EDI. MESSAGE. REQUEST FOR QUOTE MESSAGE (REQOTE). | |
| EDI. MESSAGE. SANITARY/PHYTOSANITA RY CERTIFICATE (SANCRT). | |
| EDI. MESSAGE. STATEMENT OF ACCOUNT MESSAGE (STATAC). | |
| EDI. MESSAGE. SUPERANNUATION CONTRIBUTIONS ADVICE MESSAGE (SUPCOT). | |
| EDI. MESSAGE. SUPERANNUATION MAINTENANCE MESSAGE (SUPMAN). | |
| EDI. MESSAGE. SYNTAX AND SERVICE REPORT MESSAGE. (CONTRL). | |
| ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ROAD OPERATING ABILITY. PART 1: PURE ELECTRIC VEHICLES. | |
| ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ROAD OPERATING ABILITY. PART 2: THERMAL ELECTRIC HYBRID VEHICLES. | |
| Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary | |
| Electromagnetic pulse welding - Part 2: Design of welded joints | |
| Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld setters | |
| Electromagnetic pulse welding - Part 4: Specification and qualification of welding procedures | |
| Electromagnetic pulse welding - Part 5: Quality and inspection requirements | |
| Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type | |
| Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences within a single e-cigarette | |
| Electronic fee collection - Interoperable application profiles for information exchange between Service Provision and Toll Charging (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2024.) | |
| Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice | |
| Electronic Public Procurement - Catalogue - Part 1: Choreographies (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2024.) | |
| Electronic Public Procurement - Fulfilment - Part 1: Choreographies (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Electronic Public Procurement - Ordering - Part 1: Choreographies (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2024.) | |
| Energy efficiency classes for technical insulation systems - Calculation method and applications | |
| Energy Performance of Buildings - Inspection of Automation, Controls and Technical Building Management - Part 1: Module M10-11 | |
| Entertainment technology - Codes of Practice - Part 5: Lifting and motion operations in the event industry | |
| Entertainment technology - Machinery for stages and other production areas - Part 2: Safety requirements for stands and truss lifts | |
| Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames | |
| Environmental solid matrices - Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Equipment and components intended for use in potentially explosive atmospheres in underground mines | |
| Ergonomics - Ergonomics of PPE ensembles | |
| Event structures - Safety requirements | |
| Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel... | |
| Family specification -- Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc. (Endorsed by AENOR in May of 2002.) | |
| Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods | |
| Feather and down - Sampling in view of tests | |
| Feather and down - Terms and definitions | |
| Fertilizers - Description of the forms of the physical unit | |
| Fertilizers - Extraction of total micro-nutrients in fertilizers using aqua regia | |
| Fertilizers - Extraction of water soluble micro-nutrients in fertilizers and removal of organic compounds from fertilizer extracts | |
| Fertilizers, liming materials and inhibitors - Determination of the quantity (declared by mass or volume) | |
| Fire blankets | |
| Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements | |
| Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified) | |
| Firefighting and rescue service vehicles - Part 1: Nomenclature and designation | |
| Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance. | |
| Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | |
| Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | |
| Fitness centres - Requirements for centre amenities and operation - Part 2: Requirements for supervision and staff | |
| Fixed firefighting systems - Water mist systems - Part 2: Product characteristics and test methods for nozzles | |
| Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges | |
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges | |
| Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, Class designated- Part 1: Steel flanges, NPS 1/2 to 24. | |
| FLANGES AND THEIR JOINTS. CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED. PART 3: COPPER ALLOY FLANGES. | |
| Flexible sheets for waterproofing - Determination of the resistance to wind load of roof build-up system with bonded waterproofing systems | |
| Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 1: Cradle to grave and... | |
| Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 2: Cradle to gate with... | |
| Flexible sheets for waterproofing - Underlays for discontinuous roof coverings - Artificial ageing procedure | |
| Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing | |
| Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method | |
| Food authenticity - Determination of the d13C value of mono- (fructose and glucose), di-, and trisaccharides in honey by liquid chromatography-isoto pe ratio mass spectrometry (LC-IRMS) | |
| Food authenticity - Determination of the sum of 16-O-methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by \xb9H-qNMR | |
| Food authenticity - DNA barcoding of bivalves and products derived from bivalves using a defined mitochondrial 16S rRNA gene segment | |
| Food authenticity - DNA barcoding of meat derived from mammals and birds using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Food authenticity - Food authenticity and fraud - Concepts, terms and definitions | |
| Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2024.) | |
| Foodstuffs - Determination of aflatoxins in spices other than paprika by IAC clean-up and HPLC-FLD with post-column derivatization | |
| Foodstuffs - Determination of calcium, copper, iron, magnesium, manganese, phosphorus, potassium, sodium, sulfur and zinc by ICP-OES | |
| Foodstuffs - Determination of elements and their chemical species -Determination of Ag, As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Tl, U and Zn in foodstuffs by inductively... | |
| Foodstuffs - Determination of phomopsin A in lupin seeds and lupin derived products by HPLC-MS/MS | |
| Foodstuffs - Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup | |
| Foodstuffs - Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS | |
| Foodstuffs - Minimum performance requirements for quantitative measurement of the food allergens milk, egg, peanut, hazelnut, almond, walnut, cashew, pecan nut, brazil nut, pistachio nut, macadamia nut, wheat, lupine, sesame,... | |
| Foodstuffs - Vegetable oils and foodstuff on basis of vegetable oils - Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with on-line HPLC-GC-FID analysis | |
| Forestry machinery - Requirements for sling gear and deflection pulleys for forestal hauling operations | |
| Fuels - Identification of vehicle compatibility - Graphical expression for consumer information | |
| Fugitive and diffuse emissions of common concern to industry sectors - Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere | |
| Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions | |
| Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods | |
| Furniture - Circularity - Evaluation method for dis/re-assembly capability | |
| Gas infrastructure - Gas measuring systems - Functional requirements | |
| Gas infrastructure - Injection stations - Part 1: General requirements | |
| Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the injection of biomethane | |
| Gas infrastructure - Injection stations - Part 3: Specific requirements regarding the injection of hydrogen | |
| Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations | |
| Gas-fired endothermic engine driven heat pumps - Part 1: Terms and definitions | |
| Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions | |
| Gas-fired endothermic engine driven heat pumps - Part 4: Test methods | |
| Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode | |
| GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS. (Endorsed by AENOR in May of 1996.) | |
| Generic specification: Filters using waveguide type dielectric resonators (Endorsed by AENOR in December of 2001.) | |
| GENERIC SPECIFICATION: OPTICAL FIBRES. | |
| GENERIC SPECIFICATION: QUARTZ CRYSTAL CONTROLLED OSCILLATORES. (Endorsed by AENOR in November of 1997.) | |
| GENERIC SPECIFICATION: WAVEGUIDE TYPE DIELECTRIC RESONATORS (Endorsed by AENOR in December of 2000.) | |
| Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test | |
| Glass in building - Folio interlayers for the manufacturing of laminated glass | |
| Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools | |
| Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description | |
| Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Shatter properties - Requirements and assessment methods | |
| Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard | |
| Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties | |
| Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard | |
| Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties | |
| Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool. | |
| Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions | |
| Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm) | |
| Grease separators - Part 1: Principles of design, performance and testing, marking and quality control | |
| Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance. | |
| Guidelines on a sectoral cybersecurity assessment (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2025.) | |
| Gymnastic equipment - Individual and multifunctional vaulting boxes - Safety requirements and test methods | |
| Hardware for furniture - Star bases for seating - Requirements and test methods | |
| Hardware for furniture - Tapered pressure tubes for self-supporting gas springs for the height adjustment of seating - Test methods and requirements for strength and durability | |
| Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material | |
| High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking | |
| High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics | |
| High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media | |
| High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method) | |
| High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements | |
| Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing | |
| Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for road vehicles (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2018.) | |
| Hyperloop Systems Aspects - Reference Architecture | |
| Hyperloop Transport Services | |
| Ice-cream freezers - Classification, requirements and test conditions | |
| Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres | |
| Industrial valves - Functional safety of safety-related automated valves | |
| Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements | |
| Inorganic fertilizers - Determination of nitrogen content in IBDU (isobutylidenediurea ) and CDU (crotonylidenediurea ) | |
| Installation of post-tensioning kits for prestressing of structures - Part 2: Assessment of personnel | |
| Intelligent transport systems - eSafety - eCall additional data concept for equipment limitations | |
| Intelligent transport systems - ESafety - ECall end to end conformance testing for IMS packet switched based systems (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Intelligent transport systems - eSafety - eCall High level application protocols (HLAP) using IP Multimedia Subsystem (IMS) over packet switched networks (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of... | |
| Intelligent transport systems - eSafety - eCall High level application protocols (HLAP) using IP Multimedia Subsystem (IMS) over packet switched networks | |
| Intelligent transport systems - eSafety - eCall HLAP in hybrid circuit switched/packet switched network environments (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2024.) | |
| Intelligent transport systems - eSafety - Part 5: eCall for UNECE category L1 and L3 powered two-wheel vehicles (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in April of 2025.) | |
| Leather - Chemicals - Quality control | |
| Leather - Standard data for the calculation of leather density | |
| Life cycle cost (LCC) and Life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems | |
| Lighting applications - Emergency lighting | |
| Liming materials - Determination of physical and chemical properties and specific contaminants | |
| Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation | |
| Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber | |
| Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method | |
| Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method | |
| Magnesium and magnesium alloys - Magnesium alloy ingots and castings | |
| Maintenance - Maintenance engineering - Requirements | |
| Maintenance management and functions. | |
| Maintenance process and associated indicators | |
| Materials obtained from End-of-Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method | |
| Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content | |
| Medical vehicles and their equipment - Road ambulances | |
| MEDICAL VEHICLES AND THEIR EQUIPMENT. ROAD AMBULANCES | |
| Mini-pools - Specific requirements including safety and test methods for mini-pools | |
| Mobile fire extinguishers (Endorsed by AENOR in September of 2006.) | |
| Mobile fire extinguishers - Part 1: Characteristics, performance and test methods | |
| Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which... | |
| Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1 | |
| Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods | |
| Natural gas fuelling stations - LNG unloading connector | |
| Natural gas fuelling stations - LNG unloading stop system | |
| Natural gas vehicles - LNG vehicle fuelling procedures | |
| Natural gas vehicles - Requirements for liquefied natural gas vehicle (LNGV) workshops and the management of liquefied natural gas (LNG) vehicles | |
| Non-destructive testing - Leak testing - Criteria for method and technique selection | |
| On-site non-potable water systems - Part 1: Systems for the use of rainwater | |
| Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2018.) | |
| Packaging - Determination of the degree of disintegration under simulated home composting conditions | |
| Packaging - Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of aluminium in aqueous extracts | |
| Patient handling equipment used in ambulances - Part 6: Powered chairs | |
| Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment | |
| Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher | |
| Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher | |
| Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair | |
| Patient handling equipment used in road ambulances - Part 5: Stretcher support | |
| Performance and condition assessment for buildings and civil engineering works - Framework for assessment within physical asset Management. | |
| Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) | |
| Permanent anchor devices and safety hooks | |
| Personal data protection requirements for processing operations (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Personal eye protection - Mesh eye and face protectors | |
| Personal eye protection - Sunglare filters for industrial use. | |
| Personal eye protection - Sunglare filters for industrial use | |
| PERSONAL EYE PROTECTION. SUNGLARE FILTERS FOR INDUSTRIAL USE. | |
| Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun | |
| Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use. | |
| Personal eye-protection - Infrared filters - Transmittance requirements and recommended use | |
| Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use. | |
| PERSONAL PROTECTION. EQUIPMENT FOR EYE AND FACE PROTECTION DURING WELDING AND ALLIED PROCESSES. | |
| Personal protective equipment against falls from a height - List of equivalent terms | |
| Petrol fuel for small internal combustion engines - Requirements and test methods | |
| Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter | |
| Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films | |
| Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique | |
| Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods | |
| Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage | |
| Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee | |
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow | |
| Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending | |
| Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system. | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE. POLYPROPYLENE (PP). PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM. | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes | |
| Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE RELATIVE FLEXURAL CREEP FACTOR FOLLOWING EXPOSURE TO A CHEMICAL ENVIRONMENT. | |
| Postal Services - Parcel Delivery Environmental Footprint - Methodology for calculation and declaration of GHG emissions and air pollutants of parcel logistics delivery services | |
| Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods | |
| Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods | |
| Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods | |
| PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES. | |
| PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES | |
| Privacy Information Management System per ISO/IEC 27701 - Refinements in European context (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2024.) | |
| Private security services - Protection of Critical Infrastructure - Part 2: Airport and aviation security services | |
| Private security services - Protection of Critical Infrastructure - Part 3: Maritime and port security services | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test | |
| Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis | |
| Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing | |
| Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method | |
| Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface | |
| PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. REACTIVE FUNCTIONS RELATED TO EPOXY RESINS. PART 1: DETERMINATION OF EPOXY EQUIVALENT. | |
| PROTECTION AGAINST POLLUTION OF POTABLE WATER IN WATER INSTALLATIONS AND GENERAL REQUIREMENTS OF DEVICES TO PREVENT POLLUTION BY BACKFLOW. | |
| Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in August of 2025.) | |
| Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2020.) | |
| Protective clothing - Garments with permethrin as-treated articles supporting the protection against tick bites (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2025.) | |
| Protective helmets - Test methods - Shock absorption including measuring rotational kinematics (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2024.) | |
| Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units... | |
| Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies | |
| Railway applications - Acoustics - Measurement of source terms for environmental noise calculations | |
| Railway applications - Adhesive bonding of rail vehicles and their components | |
| Railway applications - Bolting of rail vehicles and components | |
| Railway applications - General terms and definitions | |
| Railway applications - Ground based services - Coach hygiene requirements | |
| Railway applications - Ground based services - Exhaust treatment fluid (AUS 32) refilling equipment | |
| Railway applications - Ground based services - Vehicle waste water discharge equipment | |
| Railway applications - Infrastructure - Track alignment design parameters - Urban rail | |
| Railway applications - Interior glazing for rail vehicles | |
| Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets | |
| Railway applications - Strength assessment of rail vehicle structures - Part 1: General | |
| Railway applications - Strength assessment of rail vehicle structures - Part 2: Static strength assessment | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. SAFETY REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES. PART 1: GROUP II ENGINES FOR USE IN FLAMMABLE GAS AND VAPOUR... | |
| Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged... | |
| Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation | |
| Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols | |
| Reporting in support of supervision of online gambling services by the gambling regulatory authorities of the Member States | |
| Requirements for professional profiles related to personal data processing and protection (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Resilient and textile floor coverings - Assessment of static electrical propensity | |
| Resilient floor coverings - Determination of the effect of loaded heavy duty castors | |
| Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing | |
| Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings | |
| Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions | |
| Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking | |
| Risk-based inspection framework | |
| Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements | |
| Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification | |
| Road traffic noise reducing devices - Sustainability: Key Performance Indicators (KPIs) Declaration | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions... | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field... | |
| ROAD TRAFFIC NOISE REDUCING DEVICES. NON-ACOUSTIC PERFORMANCE. PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS. | |
| ROAD TRAFFIC NOISE REDUCING DEVICES. NON-ACOUSTIC PERFORMANCE. PART 2: GENERAL SAFETY AND ENVIROMENTAL REQUIREMENTS. | |
| Road vehicles for combined transport - Semitrailer - Vertical transhipment | |
| Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase. Part 1: Requirements for rubber and plastics tubing and... | |
| Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies | |
| Rubber hoses and hose assemblies for fuel truck delivery - Specification | |
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification | |
| Rubber- or plastics coated fabrics - Determination of flexibility | |
| Rubber- or plastics coated fabrics - Determination of resistance to water penetration - Low pressure method | |
| Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method | |
| Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop | |
| Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test | |
| Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances | |
| Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kPa | |
| Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust | |
| Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks | |
| Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional... | |
| SAFETY OF MACHINERY - GUIDANCE FOR THE DRAFTING OF THE NOISE CLAUSES OF SAFETY STANDARDS | |
| Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood | |
| Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or... | |
| Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks (Endorsed by AENOR in May of 2005.) | |
| Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests | |
| Sectional Specification: Connector sets for optical fibres and cables Type MF. (Endorsed by AENOR in March of 2001.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES- TYPE MPO. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE 0CCA-PC (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSH (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE OCCA-BU (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE RCC. (Endorsed by AENOR in July of 1998.) | |
| Sectional Specification: Optical cables to be used along electrical power lines (OCEPL) (Endorsed by AENOR in May of 2002.) | |
| SECTIONAL SPECIFICATION: QUARTZ CRYSTAL CONTROLLED OSCILLATORS (CAPABILITY APPROVAL). (Endorsed by AENOR in November of 1997.) | |
| Security Evaluation Standard for IoT Platforms (SESIP). An effective methodology for applying cybersecurity assessment and re-use for connected products. (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of 2023.) | |
| Soil improvers and growing media - Determination of temperature-time profiles during composting and digestion | |
| Sports and recreational equipment - Parkour equipment - Safety requirements and test methods | |
| Spray booths for organic coating material - Safety requirements (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2019.) | |
| Stationary source emissions - Data acquisition and handling systems - Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling... | |
| Sustainability of construction works - Evaluation of the potential for sustainable refurbishment of buildings | |
| Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | |
| Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers | |
| Tests for chemical properties of aggregates - Part 1: Chemical analysis | |
| Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates | |
| Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures | |
| Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts | |
| Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement | |
| Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) | |
| Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates | |
| Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test | |
| TEXTILE FLOOR COVERINGS. DETERMINATION OF WOOL FIBRE INTEGRITY USING AN ABRASION MACHINE. | |
| Textiles - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes | |
| Textiles - Fabrics - Determination of width and length | |
| Textiles and textile products - Determination of biocide additives - Part 1: 2-Phenylphenol and triclosan, method using liquid chromatography | |
| Textiles and textile products - Determination of biocide additives - Part 2: Chlorophenol-based preservatives, method using gas chromatography | |
| Textiles and textile products - Determination of certain residual solvents - Part 2: Determination of benzene, method using headspace gas chromatography (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of... | |
| Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography | |
| Thermal insulation products - Assessment of the susceptibility to mould growth - Laboratory test method | |
| Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n... | |
| Thermal performance of buildings - In situ testing of building test structures - Part 1: Data collection for aggregate heat loss test | |
| Thermal performance of buildings - In situ testing of building test structures - Part 2: Steady-state data analysis for aggregate heat loss test | |
| Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test | |
| Thermal performance of buildings - In situ testing of completed buildings - Part 2: Steady-state data analysis for aggregate heat loss test | |
| Thermal road vehicles - Temperature-controll ed systems using flammable refrigerants for transport of goods - Requirements and risk analysis process | |
| Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment | |
| Value Management - Function Analysis: Basic characteristics, Requirements and guidance for implementation (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Valves and fittings for buildings and devices to prevent pollution by backflow of potable water - Polymer parts and housings under internal pressure and without external loads | |
| Vapour products - Vaping regime for products intended to be used for direct to lung inhalation | |
| VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPERS AND VALVES | |
| Waste - Characterization of granular solids with potential for use as construction material - Compliance leaching test - Up-flow percolation test (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in December of... | |
| Waste Management - Data communication between communication management system and the back office system for stationary waste collection containers - Functional specification and the semantic data model | |
| Water quality - Determination of selected per- and polyfluoroalkyl substances in drinking water - Method using liquid chromatography/tande m-mass spectrometry (LC-MS/MS) | |
| Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices | |
| Water quality - General requirements and performance test procedures for water monitoring equipment - Measuring devices | |
| Water quality - Sampling, capture and preservation of environmental DNA from water | |
| Water quality - Spectrophotometric determination of chlorophyll-a content by ethanol extraction for the routine monitoring of water quality | |
| Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components | |
| Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components | |
| Welding - Basic welded joint details in steel - Part 1: Pressurized components | |
| Welding and allied processes - Gas welding equipment - Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment | |
| Welding. Multilingual list of terms for welding and rated processes. |
| << Prev | Next >> |