Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1150
1200
1250
1300
1350
1400
1440
1450
1460
1470
1480
1490
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1520
1530
1540
1550
1560
1570
1600
1620
| Product Name | Notes |
|---|---|
| A BIBLIOGRAPHY OF HYDRAULIC VALVE STANDARDS AND TEST PROCEDURES | |
| A LONGITUDINAL WATER PENETRATION RESISTANCE TEST FOR SEALED CONDUCTOR | |
| Accumulator - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a... | |
| Acetone Extractives of Wood and Pulp | |
| Acid-Insoluble Ash in Wood, Pulp, Paper, and Paperboard | |
| Air Line Filter, Regulator and/or Lubricator - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the... | |
| AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR PRESSURE RATING SUPPLEMENT NO. 4 to NFPA Recommmended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a... | |
| Air Permeability of Porous Paper, Fabrics, and Pulp Handsheets | |
| Application Guidelines of Cylinders | |
| Application Profiles for Simultaneous Voice and Facsimile Terminals - Series T: Terminals for Telematic Services | |
| Application profiles for simultaneous voice and facsimile terminals | |
| Ash in Wood, Pulp, Paper and Paperboard: Combustion at 900 Degrees Celsius | |
| Asynchronous Facsimile DCE Control - Service Class 1 - Annex B - Procedure for Service Class 1 Support of V.34 Modems - Terminals for Telematic Services | |
| Asynchronous Facsimile DCE Control - Service Class 1 - Annex B - Procedure for Service Class 1 Support of V.34 Modems | |
| Asynchronous Facsimile DCE Control - Service Class 1 - Terminals for Telematic Services (Study Group 8) 27 pp | |
| ASYNCHRONOUS FACSIMILE DCE CONTROL - SERVICE CLASS 1 Annex B Procedure for Service Class 1 support of V.34 modems | |
| Asynchronous Facsimile DCE Control - Service Class 1 | |
| Asynchronous Facsimile DCE Control - Service Class 2 - Terminals for Telematic Services (Study Group 8) 82 pp | |
| Asynchronous Facsimile DCE Control - Service Class 2 - Terminals for Telematic Services | |
| Asynchronous Facsimile DCE Control - Service Class 2 | |
| Basic Density and Moisture Content of Pulpwood | |
| Bibliography - Hydraulic Fluid Power - Pump/Motor Standards | |
| Bibliography of Fluid Logic Devices | |
| Bibliography of Fluid Power Hose, Hose Fittings and Hose Assemblies | |
| Bibliography of Fluid Power Quick Action Coupling Standards | |
| Bibliography of Fluid Power Tube Fittings and Conductors | |
| Bibliography of Hydraulic Fluid Power Reservoirs and Power Units Standards | |
| Bursting Strength of Paper | |
| Calcium in Pulp | |
| Carbohydrate Composition of Extractive-Free Wood and Wood Pulp by Gas-Liquid Chromatography | |
| Carboxyl Content of Pulp | |
| Cavity dimensions for fluid power exclusion devices (inch series) | |
| Chromatographic Analysis of Purified Pulp | |
| Compression Wood Identification in Pulpwood (Redesignation of T20) | |
| Compression wood identification in pulpwood | |
| Conducting Vertical Cable Tray Flame Tests with Theoretical Heat Input Rate of 210,000 B.T.U./Hour | |
| Conducting Vertical Cable Tray Flame Tests with Theoretical Heat Input Rate of 70,000 B.T.U./Hour | |
| Consistency (Concentration) of Pulp Suspensions | |
| Copper in Pulp | |
| Cupriethylenediamine Disperse Viscosity of Pulp (Falling Ball Method) | |
| DEFINING INTERFACE SURFACES FOR EACH PNEUMATIC VALVE INTERFACE IN NFPA RECOMMENDED STANDARD T3.21.1-1973 | |
| Degree of Fiber Bonding by Short-Span Tensile Testing | |
| Determination of Sodium, Calcium, Copper, Iron, and Manganese in Pulp and Paper by Atomic Absorption Spectroscopy | |
| Effective Fiber Lenght Index by Zero/Short-Span Tensile Testing | |
| Establishing Compatibility of Sealed Conductor Filler Compounds with Conducting Stress Control Materials | |
| Facsimile Routing Utilizing the Subaddress - Series T: Terminal Equipments and Protocols for Telematic Services | |
| Facsimile Routing Utilizing the Subaddress | |
| Fiber Analysis of Paper and Paperboard | |
| Fiber Length of Pulp and Paper by Automated Optical Analyzer Using Polarized Light | |
| Fines Fraction by Weight of Paper Stock by Wet Screening | |
| Finite Life Hydraulic Filter Pressure/Life Rating - Method for Verifying the Fatigue Life Rating and the Burst Pressure Rating of the Pressure Containing Envelope of a Spin-on Hydraulic Filter First... | |
| Fluid power \x96 Bibliography \x96 Connectors and conductors | |
| Fluid power \x96 Sealing devices \x96 Groove dimensions for radial compression type piston rings | |
| Fluid power \x96 Square head cylinders \x96 Determination of the static failure pressure rating of pressure-containing components | |
| FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT | |
| Fluid Power Systems - Quick-Action Couplings - Glossary | |
| Fluid power systems and components - Cylinder bore and rod size combinations - Rod end configurations, dimensional identification code - Mounting dimensions for bore sizes less than 1 1/2 inch... | |
| Fluid Power Systems and Components - Cylinders Bore and Rod Size Combinations - Rod End Configurations, Dimensional Identification Code - Mounting Dimensions for Bore Sizes Less Than 1 1/2 Inch... | |
| Fluid power systems and components Electrically-control led industrial valves Interface dimensions for electrical connectors | |
| Fluid Power Systems and Products - Moving Parts Fluid Controls - Method of Diagramming First Edition (Revision and Redesignation of ANSI/NFP(A) B93.38-76) | |
| Fluid Power Systems and Products - Square Head Industrial Cylinders - Mounting Dimensions Third Edition (Revision and Redesignation of ANSI/B93.15-1981) | |
| Fluid power systems and products \x96 Cylinder bores and piston rod diameters \x96 Inch series | |
| Fluid power systems and products \x96 Moving parts fluid controls \x96 Method of diagramming | |
| Fluid power systems and products \x96 Square head industrial cylinders \x96 Mounting dimensions | |
| Fluid power systems Cylinders Dimensions for accessories for catalogued square head industrial types | |
| Foreign Particulate Matter in Pulp by Transmitted Light | |
| Forming Handsheets for Reflectance Testing of Pulp (Sheet Machine Procedure) | |
| GENERAL PRINCIPLES OF TELEMATIC INTERWORKING | |
| Glossary of Terms for Compressed Air Dryers | |
| Glossary of Terms for Hydraulic Fluid Power Filters and Separators | |
| Grammage of Paper and Paperboard (Weight per Unit Area) | |
| GRAPHIC SYMBOLS FOR FLUIDIC DEVICES AND CIRCUITS | |
| Groove dimensions for floating type metallic and non-metallic fluid power piston rings | |
| GUIDE FOR CONDUCTING LONGITUDINAL WATER PENETRATION RESISTANCE TESTS ON LONGITUDINAL WATER BLOCKED CABLES | |
| Guide for Establishing Stability of Volume Resistivity for Conducting Polymeric Components of Power Cables | |
| GUIDE FOR ESTABLISHING STABILITY OF VOLUME RESISTIVITY FOR SEMICONDUCTING POLYMERIC COMPONENTS OF POWER CALBES | |
| GUIDE FOR FREQUENCY OF SAMPLING EXTRUDED DIELECTRIC POWER, CONTROL, INSTRUMENTATION, AND PORTABLE CABLES FOR TEST | |
| Hexeneuronic acid content of chemical pulp | |
| Hydraulic Filter/Separator Housing - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope... | |
| Hydraulic Filter/Separator Housing - Pressure Rating Supplement to NFPA/T2.6.1.R1-1991, Fluid Power Systems and Products - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing... | |
| Hydraulic Fluid Power - Calibration Method - To Count and Measure Computer Assisted Image Analysis Systems - Particles in the 1 - 10mm Range | |
| Hydraulic Fluid Power - Cylinder Ports - SAE Straight Thread O-Ring and Four-Bolt Flange Ports - ISO Straight Thread O-Ring and Four-Bolt Flange Ports - Heavy Duty and Light Duty... | |
| Hydraulic Fluid Power - Cylinders - Cushion Performance | |
| Hydraulic Fluid Power - Cylinders - Method for Determining the Buckling Load | |
| Hydraulic Fluid Power - Design for Nonintegral Industrial Reservoirs | |
| Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 1: at Constant Low Speed and at Constant Pressure | |
| Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability | |
| Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics | |
| Hydraulic Fluid Power - Filter Artwork Universal Symbols | |
| Hydraulic Fluid Power - Filter Element - Method for Determining the Quantity of Built-In Contaminant | |
| Hydraulic Fluid Power - Filter Elements - Method for Verifying Flow Fatigue Characteristics | |
| Hydraulic Fluid Power - Filter Elements - Verification of Collapse/Burst Resistance | |
| Hydraulic Fluid Power - Filters - Determination of Differential Pressure /Flow Characteristics (Metric Only) | |
| Hydraulic Fluid Power - Filters - Multi-Pass Method for Evaluating Filtration Performance | |
| Hydraulic Fluid Power - Filters and Separators - Graphic Symbols Supplement | |
| Hydraulic Fluid Power - Flow Control Valves - Method for Measuring and Reporting Regulating Characteristics First Edition | |
| Hydraulic Fluid Power - Fluid Contamination - Determination of Solid Contaminant Level By the Gravimetric Method First Edition | |
| Hydraulic Fluid Power - In-Line Liquid Automatic Particle Counting Systems - Method of Calibration and Validation | |
| Hydraulic Fluid Power - Method for Determining the Particulate Count of an Oil Sample (Using Liquid Automatic Counters) | |
| Hydraulic Fluid Power - Method for Determining the Particulate Count of an Oil Sample from a System (Using Liquid Automatic Counters) First Edition | |
| Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Dimensions and Identification Code for Mounting Flanges and Shaft Ends | |
| Hydraulic Fluid Power - Positive Displacement Pumps, Motors and Integral Transmissions - Method of Testing and Presenting Basic Performance Data | |
| Hydraulic Fluid Power - Pressure Relief Valves - Method of Testing and Presenting Basic Performance Data | |
| Hydraulic Fluid Power - Pumps - Determination of Fluid Pressure Fluctuation Characteristics | |
| Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Load Sensing Pumps | |
| Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Pressure Compensated Pumps First Edition | |
| Hydraulic Fluid Power - Pumps and Motors - Glossary | |
| Hydraulic fluid power - Reciprocating dynamic sealing devices in linear actuators - Method of testing, measuring and reporting leakage | |
| Hydraulic Fluid Power - Requirements for NonIntegral Industrial Power Units | |
| Hydraulic fluid power - Two-, three-, and four-port screw-in cartridge valves - Cavities with UN and UNF threads | |
| Hydraulic Fluid Power - Two-Port Slip-In Cartridge Valves - Cavities (Technically Equivalent to ISO 7368:1989) First Edition Errata - June 1996 | |
| Hydraulic Fluid Power - Valves - Mounting Surfaces | |
| Hydraulic Fluid Power - Valves - Pressure Differential-Flow Characteristic - Method of Measuring and Reporting | |
| Hydraulic Fluid Power - Valves - Pressure Relief Mounting Interfaces | |
| Hydraulic fluid power \x96 Filters and separators \x96 Glossary\x96 Supplement to ISO 5598:1985 \x96 Fluid power systems and components \x96 Vocabulary | |
| Hydraulic fluid power \x96 Solenoid operated directional control valves \x96 Measurement of response time | |
| Hydraulic fluid power \x97 Directional control valve \x97 Method for determining the metering characteristics | |
| Hydraulic fluid power \x97 Quick-action coupling \x97 Flush face type | |
| Hydraulic fluid power Cylinder actuator mounted valves Standard dimensions for mounting surfaces | |
| Hydraulic fluid power Valves Method for determining the internal leakage characteristics | |
| HYDRAULIC RESERVOIR PRESSURE RATING SUPPLEMENT NO. 8 to NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component... | |
| Hydraulic Valve - Pressure Rating Supplement to NFPA/T2.6.1 R1-1991, Fluid Power Systems and Products - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing... | |
| HYDRAULIC VALVE PRESSURE RATING SUPPLEMENT NO. 9 to NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component... | |
| Hypo Number of Pulp | |
| Identification of Wood and Fibers from Conifers | |
| IMAGING PROCESS OF CHARACTER INFORMATION ON FACSIMILE APPARATUS | |
| Information Report - Bibliography - Compressed Air Dryer Standards | |
| Information Report - Bibliography - Fluid Power Cylinder Standards | |
| Information Report - Bibliography - Hydraulic Fluid Power - Accumulator Standards | |
| Information Report - Bibliography - Hydraulic Fluid Power - Filtration and Contamination Standards | |
| Information Report - Bibliography - Hydraulic Fluid Power - Sealing Devices Standards | |
| Information Report - Bibliography - Pneumatic Fluid Power - Filter, Regulator and Lubricator (FRL) Standards | |
| Information Report - Bibliography - Pneumatic Fluid Power - Valve Standards | |
| Information Report - Fluid power - Bibliography - Cylinders | |
| Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling and Installation of Elastomeric Seals and Exclusion Devices | |
| Information report - Hydraulic fluid power - Bibliography - Sealing devices standards | |
| Information Report Hydraulic Fluid Power - Determination of Particulate Contaminant Level Using Automatic Optical Particle Counters | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format - Document Structures - Terminal Equipments and Protocols for Telematix Services | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Abstract Interface for the Manipulation of ODA Documents - Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: ABSTRACT INTERFACE FOR THE MANIPULATION OF ODA DOCUMENTS | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile - Telematic Services Terminal Equipments and Protocols for Telematic Services 37 pp | |
| Information technology - Open Document Architecture (ODA) and interchange format: Document profile Technical Corrigendum 1 | |
| Information technology - Open Document Architecture (ODA) and interchange format: Document profile Technical Corrigendum 2 | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile; Technical Corrigendum 1 - Series T: Terminals for Telematic Services | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile; Technical Corrigendum 2 - Series T: Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: DOCUMENT PROFILE | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Structures; Technical Corrigendum 1 - Series T: Terminals for Telematic Services | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Structures; Technical Corrigendum 2 - Series T: Terminals for Telematic Services | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles - Telematic Services Terminal Equipments and Protocols for Telematic Services 85 pp | |
| Information technology - Open Document Architecture (ODA) and interchange format: Introduction and general principles Technical Corrigendum 1 | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles; Technical Corrigendum 1 - Series T: Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: INTRODUCTION AND GENERAL PRINCIPLES | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format - Telematic Services Terminal Equipments and Protocols for Telematic Services 110 pp | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format; Technical Corrigendum 1 - Series T: Terminals for Telematic Services | |
| Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format; Technical Corrigendum 2 - Series T: Terminals for Telematic Services | |
| INFORMATION TECHNOLOGY \x96 OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT \x96 DOCUMENT STRUCTURES | |
| Information technology \x96 Open Document Architecture (ODA) and interchange format: Document structures Technical Corrigendum 1 | |
| Information technology \x96 Open Document Architecture (ODA) and interchange format: Document structures Technical Corrigendum 2 | |
| Information technology \x96 Open Document Architecture (ODA) and interchange format: Open document interchange format Technical Corrigendum 1 | |
| Internal Tearing Resistance of Paper (Elmendorf-Type Method) | |
| Iron in Pulp | |
| Kappa Number of Pulp | |
| Laboratory Beating of Pulp (PFI Mill Method) | |
| Laboratory Screening of Pulp (MasterScreen - Type Instrument) | |
| Low-Smoke, Halogen-Free (LSHF) Polymeric Cable Jackets | |
| Machine Direction of Paper and Paperboard | |
| Macro Stickies Content in Pulp: the "Pick-Up" Method | |
| Macro stickies content in pulp: the \x93pick-up\x94 method | |
| Manganese in Pulp | |
| Method of Establishing the Speed Degradation of Hydraulic Fluid Power Motors When Exposed to Particulate Contaminant; Appendices X, Y and Z | |
| Method of Measuring Sound Generated by Hydraulic Fluid Power Pumps | |
| Moisture in Pulp, Paper and Paperboard | |
| Multi-Pass Method for Evaluating the Filtration Performance of a Coarse Hydraulic Fluid Power Filter Element; Appendix | |
| Natural Dirt in Wood Chips | |
| Obtaining and Testing Drilled Cores and Sawed Beams of Concrete | |
| Open Drum Washer Mat Sampling Technique | |
| PARTIAL DISCHARGE TEST PROCEDURE | |
| Partial-Discharge Test Procedure | |
| Petroleum Wax in Impregnated Papers | |
| PH and Electrical Conductivity of Hot Water Extracts of Pulp, Paper, and Paperboard | |
| Pneumatic Fluid Power - Bibliography - Valve Standards | |
| Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components | |
| Pneumatic Fluid Power - Labeling and Communication of Pneumatic Products | |
| Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves First Edition | |
| Pneumatic Fluid Power - Pressure Regulator - Industrial Type Third Edition (Revision and Redesignation of ANSI/B93.13M-1981) | |
| Pneumatic Fluid Power - Recommended Practice for Calibration and Use of Flowmeters First Edition | |
| Pneumatic fluid power \x97 Electrical connections for valve islands \x97 Correspondence between solenoids and electrical connector pins and sockets | |
| Pneumatic fluid power Bibliography Filter, regulator and lubricator (FRL) standards | |
| Pneumatic Quick-Action Couplings - Plug Dimensions | |
| Pneumatic Valve - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of... | |
| PNEUMATIC VALVE PRESSURE RATING SUPPLEMENT NO. 2 NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component | |
| Port Nominal Pipe Sizes for Merged Inch and Metric Series Cataloged Square Head Industrial Pneumatic Fluid Power Cylinders | |
| Preparation of Mechanical Pulps for Testing | |
| Preparation of Wood for Chemical Analysis | |
| Pressure Switch - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of... | |
| PRESSURE SWITCH PRESSURE RATING SUPPLEMENT NO. 3 to NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component... | |
| Procedure for the Allocation of ITU-T Defined Codes for Non-Standard Facilities Series T: Terminals for Telematic Services | |
| Procedure for the Allocation of ITU-T Defined Codes for Non-Standard Facilities | |
| Procedures for Document Facsimile Transmission in the General Switched Telephone Network - Series T: Terminals for Telematic Services | |
| Procedures for document facsimile transmission in the general switched telephone network Amendment 1: Extension of silence period during fallback from V.34 | |
| Procedures for Document Facsimile Transmission in the General Switched Telephone Network Series T: Terminals for Telematic Services | |
| Procedures for document facsimile transmission in the general switched telephone network | |
| Procedures for real-time Group 3 facsimile communication over IP networks Amendment 1: Addition of vendor information in SIP/SDP call setup, corrections to Annex C and Annex D, and enhanced implementation... | |
| Procedures for real-time Group 3 facsimile communication over IP networks | |
| Procedures for the Transfer of Facsimile Data Via Store-and-Forward on the Internet - Series T: Terminals for Telematic Services | |
| Procedures for the transfer of facsimile data via store-and-forward on the Internet Amendment 1: Full Mode | |
| Procedures for the Transfer of Facsimile Data Via Store-and-Forward on the Internet Amendment 2 Series T: Terminals for Telematic Services | |
| Procedures for the transfer of facsimile data via store-and-forward on the Internet Amendment 2 | |
| Procedures for the Transfer of Facsimile Data Via Store-and-Forward on the Internet Amendment 3 Series T: Terminals for Telematic Services | |
| Procedures for the transfer of facsimile data via store-and-forward on the Internet Amendment 3 | |
| Procedures for the transfer of facsimile data via store-and-forward on the Internet | |
| Procedures for the Transfer of Facsimile Data Via Store-and-Foward on the Internet Amendment 1: Full Mode Series T: Terminals for Telematic Services | |
| Pulp Screening (Valley-Type Screening Device) | |
| Pump/Motor - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a... | |
| Pump/Motor Pressure Rating Supplement No. 6 to NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component | |
| QUICK DISCONNECT PRESSURE RATING SUPPLEMENT NO. 5 to NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component... | |
| Quick-Action Coupling - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Rating of the Pressure Containing Envelope of... | |
| Recommended Practice - Hydraulic Fluid Power - Application Guidelines for Accumulators | |
| Recommended Practice - Hydraulic Fluid Power - Application Guidelines for Hydraulic Valves | |
| Recommended Practice - Pneumatic Fluid Power - Filters, Regulators and Lubricators - Application Guideline | |
| Reducible Sulfur in Paper and Paperboard | |
| Revision (February, 1992) of the T-410 Series (1988) of Recommendations Contained in the CCITT Blue Book, Fascicle VII.6 on the Subject of "Colour" | |
| Rosin in Paper and Paperboard | |
| Rotary shaft lip type seals - Part 2: Vocabulary (Technically identical to ISO 6194-2:1991). | |
| Sampling and Accepting a Single Lot of Paper, Paperboard, Containerboard, or Related Product | |
| Sampling and Preparing Wood for Analysis | |
| Screening of pulp (Somerville-type equipment) | |
| Screening of Pulp (Sommerville-Type Equipment) | |
| Security Capabilities for Use with Group 3 Facsimile Terminals Amendment 1 Series T: Terminals for Telematic Services | |
| Security Capabilities for Use with Group 3 Facsimile Terminals Amendment 1 | |
| Security Capabilities for Use with Group 3 Facsimile Terminals Series T: Terminals for Telematic Services | |
| Security Capabilities for Use with Group 3 Facsimile Terminals | |
| Silicates and Silica in Pulp (Wet Ash Method) | |
| Species Identification of Nonwood Plant Fibers | |
| Standard Conditioning and Testing Atmospheres for Paper, Board, Pulp Handsheets, and Related Products | |
| STANDARD FOR PARTIAL DISCAHRGE TEST PROCEDURE | |
| Standard for Partial Discharge Test Procedure | |
| Standard Method of Test for Accelerated Aging of Hot-Poured Asphalt Crack Sealant Using a Vacuum Oven | |
| Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction | |
| Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel | |
| Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS) | |
| Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content | |
| Standard Method of Test for Apparent Viscosity of Hot-Poured Asphalt Crack Sealant Using Rotational Viscometer | |
| Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method | |
| Standard Method of Test for Bend Test for Bars for Concrete Reinforcement | |
| Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method | |
| Standard Method of Test for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level) | |
| Standard Method of Test for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform | |
| Standard Method of Test for Cantabro Abrasion Loss of Asphalt Mixture Specimens | |
| Standard Method of Test for Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequential Pressure Method | |
| Standard Method of Test for Coated Dowel Bars | |
| Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete | |
| Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests) | |
| Standard Method of Test for Comparative Qualitative Corrosion Characterization of Uncoated Chromium-Alloyed Steel Bars Used for Concrete Reinforcement (Tombstone Test) | |
| Standard Method of Test for Concrete Pipe, Manhole Sections, or Tile | |
| Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils | |
| Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load | |
| Standard Method of Test for Density of In-Place Hot Mix Asphalt (HMA) Pavement by Electronic Surface Contact Devices | |
| Standard Method of Test for Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods | |
| Standard Method of Test for Density of Soil and Soil-Aggregate In-Place by Nuclear Methods (Shallow Depth) | |
| Standard Method of Test for Detectable Warning Systems | |
| Standard Method of Test for Detecting the Presence of Phosphorous in Asphalt Binder | |
| Standard Method of Test for Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test | |
| Standard Method of Test for Determination of Composite Activation Energy of Aggregates due to Alkali\x96Silica Reaction (Chemical Method) | |
| Standard Method of Test for Determination of Compression Capacity for Profile Wall Plastic Pipe by Stub Compression Loading | |
| Standard Method of Test for Determination of Heavy Metal Content of Glass Beads Using X-Ray Fluorescence (XRF) | |
| Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition | |
| Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method | |
| Standard Method of Test for Determination of the Voids of Dry Compacted Filler | |
| Standard Method of Test for Determining Aggregate Shape Properties by Means of Digital Image Analysis | |
| Standard Method of Test for Determining Air Content of Hardened Portland Cement Concrete by High-Pressure Air Meter | |
| Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test | |
| Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe | |
| Standard Method of Test for Determining Dynamic Modulus of Hot Mix Asphalt (HMA) | |
| Standard Method of Test for Determining Expansive Soils | |
| Standard Method of Test for Determining Formwork Pressure of Fresh Self-Consolidating Concrete (SCC) Using Pressure Transducers | |
| Standard Method of Test for Determining In-Place Density and Moisture Content of Soil and Soil\x96 Aggregate Using Complex Impedance Methodology | |
| Standard Method of Test for Determining Minimum Laboratory Soil Resistivity | |
| Standard Method of Test for Determining pH of Soil for Use in Corrosion Testing | |
| Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA) | |
| Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method | |
| Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD) | |
| Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (MHA) Using the Indirect Tensile Test Device | |
| Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test | |
| Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test | |
| Standard Method of Test for Determining the Dielectric Constant of Compacted Asphalt Mixture Specimens | |
| Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT) | |
| Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (MHA) Subjected to Repeated Flexural Bending | |
| Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | |
| Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB) | |
| Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT) | |
| Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) | |
| Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM) | |
| Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method | |
| Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers | |
| Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate | |
| Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures using the Superpave Shear Tester (SST) | |
| Standard Method of Test for Determining the Quality of Tack Coat Adhesion to the Surface of an Asphalt Pavement in the Field or Laboratory | |
| Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials | |
| Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | |
| Standard Method of Test for Determining the Shear Strength at the Interface of Bonded Layers of Portland Cement Concrete | |
| Standard Method of Test for Determining the Viscosity of Emulsified Asphalt by a Rotational Paddle Viscometer | |
| Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil | |
| Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil | |
| Standard Method of Test for Developing Early-Age Compression Test Values and Projecting Later-Age Strengths | |
| Standard Method of Test for Direct Shear Test of Soils under Consolidated Drained Conditions | |
| Standard Method of Test for Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer | |
| Standard Method of Test for Electrical Indication of Concrete s Ability to Resist Chloride Ion Penetration | |
| Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test | |
| Standard Method of Test for Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep | |
| Standard Method of Test for Estimating the Cracking Tendency of Concrete | |
| Standard Method of Test for Estimating the Early Opening Strength of Concrete Pavements by Maturity Tests | |
| Standard Method of Test for Estimating the Strength of Concrete in Transportation Construction by Muturity Tests | |
| Standard Method of Test for Evaluating Stress Development and Cracking Potential due to Restrained Volume Change Using a Dual Ring Test | |
| Standard Method of Test for Evaluating the Workability of Slip Form Concrete Paving with the Box Test | |
| Standard Method of Test for Evaluation of Asphalt Release Agents (ARAs) | |
| Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading | |
| Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Hot-Poured Asphalt Crack Sealant by Direct Tension Test | |
| Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR) | |
| Standard Method of Test for Family of Curves - One-Point Method | |
| Standard Method of Test for Filling Capacity of Self-Consolidating Concrete Using the Caisson Test | |
| Standard Method of Test for Force Ductility Test of Asphalt Materials | |
| Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire | |
| Standard Method of Test for Glass Beads Used in Pavement Markings | |
| Standard Method of Test for Grain-Size Analysis of Granular Soil Materials | |
| Standard Method of Test for Hamburg Wheel-Track Testing of compacted Hot-Mix Asphalt (HMA) | |
| Standard Method of Test for Helical Continuously Welded Seam Corrugated Steel Pipe | |
| Standard Method of Test for Helical Lock Seam Corrugated Pipe | |
| Standard Method of Test for High-Strain Dynamic Testing of Piles | |
| Standard Method of Test for Identification of Iron-Based Alloy Steel Bars for Concrete Reinforcement or Dowels by Handheld X-Ray Fluorescence (XRF) Spectrometer | |
| Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods | |
| Standard Method of Test for Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer | |
| Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices | |
| Standard Method of Test for Laboratory Determination of Moisture Content of Soils | |
| Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems | |
| Standard Method of Test for Macrocell Slab Chloride Threshold | |
| Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method | |
| Standard Method of Test for Measurements of Pore Pressures in Soils | |
| Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester | |
| Standard Method of Test for Measuring Interfacial Fracture Energy of Hot-Poured Asphalt Crack Sealant Using a Blister Test | |
| Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR) | |
| Standard Method of Test for Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit | |
| Standard Method of Test for Mechanical Analysis of Extracted Aggregate | |
| Standard Method of Test for Mechanical Testing of Steel Products | |
| Standard Method of Test for Moisture Content of Hot-Mix Asphalt (HMA) by Oven Method | |
| Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | |
| Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers | |
| Standard Method of Test for Nonlinear Impact Resonance Acoustic Spectroscopy (NIRAS) for Concrete Specimens with Damage from the Alkali\x96Silica Reaction (ASR) | |
| Standard Method of Test for Notched Bar Impact Testing of Metallic Materials (CVN) | |
| Standard Method of Test for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete | |
| Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering | |
| Standard Method of Test for Passing Ability of Self-Consolidating Concrete (SCC) by J-Ring | |
| Standard Method of Test for Pavement Deflection Measurements | |
| Standard Method of Test for Pavement Thickness by Magnetic Pulse Induction | |
| Standard Method of Test for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures | |
| Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders | |
| Standard Method of Test for Potential Alkali Reactivity of Aggregates and Effectiveness of ASR Mitigation Measures (Miniature Concrete Prism Test, MCPT) | |
| Standard Method of Test for Predicting Chloride Penetration of Hydraulic Cement Concrete by the Rapid Migration Procedure | |
| Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures | |
| Standard Method of Test for Preparation of Test Specimens of Hot Mix Asphalt (HMA) by Means of California Kneading Compactor | |
| Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor | |
| Standard Method of Test for Progressing Auger Borings for Geotechnical Explorations | |
| Standard Method of Test for Protective Sealers for Portland Cement Concrete | |
| Standard Method of Test for Quality of Water to Be Used in Concrete | |
| Standard Method of Test for Quantifying Calcium Oxychloride Amounts in Cement Pastes Exposed to Deicing Salts | |
| Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA) | |
| Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures | |
| Standard Method of Test for Rapid Axial Compressive Load Testing of Deep Foundation Units | |
| Standard Method of Test for Rapid Identification of Alkali-Silica Reaction Products in Concrete | |
| Standard Method of Test for Real-Time Estimate of In-Place Concrete Strength Using Acoustical Resonance Method | |
| Standard Method of Test for Reducing Samples of Aggregate to Testing Size | |
| Standard Method of Test for Reducing Samples of Hot-Mix Asphalt to Testing Size | |
| Standard Method of Test for Resilient Modulus of Unbound Granular Base/Subbase Materials and Subgrade Soils - SHRP Protocol P46 | |
| Standard Method of Test for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus | |
| Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage | |
| Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration | |
| Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus | |
| Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus | |
| Standard Method of Test for Rutting and Fatigue Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD) | |
| Standard Method of Test for Sampling and Testing Brick | |
| Standard Method of Test for Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials | |
| Standard Method of Test for Sampling Bituminous Materials | |
| Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel | |
| Standard Method of Test for Sensitivity of Stainless Steel to Intergranular Attack | |
| Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates | |
| Standard Method of Test for Sieve Analysis of Mineral Filler for Hot-Mix Asphalt | |
| Standard Method of Test for Slump Flow of Self-Consolidating Concrete (SCC) | |
| Standard Method of Test for Soil Suction | |
| Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method | |
| Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method | |
| Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester | |
| Standard Method of Test for Surface Resistivity Indication of Concrete\x92s Ability to Resist Chloride Ion Penetration | |
| Standard Method of Test for Temperature of Freshly Mixed Hydraulic- Cement Concrete | |
| Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete | |
| STANDARD METHOD OF TEST FOR TESTING EPOXY RESIN ADHESIVE | |
| Standard Method of Test for The Qualitative Detection of Harmful Clays of the Smectite Group in Aggregates Using Methylene Blue | |
| Standard Method of Test for Thermoplastic Traffic Line Material | |
| Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying | |
| Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading) | |
| Standard Method of Test for Uncompacted Void Content of Fine Aggregate | |
| Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression | |
| Standard Method of Test for Uniaxial Tensile Response of Ultra-High Performance Concrete | |
| Standard Method of Test for Vibrating Kelly Ball (VKelly) Penetration in Fresh Portland Cement Concrete | |
| Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer | |
| Standard Method of Test for Visual Stability Index (VSI) of Self-Consolidating Concrete (SCC) | |
| Standard Method of Test for Vitrified Clay Pipe | |
| Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying | |
| Standard Method of Test for Weight and Diameter for Carbon-Steel for Steel Wire and Welded Wire Reinforcement for Concrete | |
| Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens | |
| Standard Specification for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin Film Oven Test) | |
| Standard Specification for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) | |
| Standard Specification for Moisture Content of Soil and Soil-Aggregate In-Place by Nuclear Methods (Shallow Depth) | |
| Standard Test Method for Air-Void Characteristics of Freshly Mixed Concrete by Buoyancy Change | |
| Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures | |
| STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER, CONTROL, INSTRUMENTATION, AND PORTABLE CABLES FOR TEST | |
| Standardization of Group 2 Facsimile Apparatus for Document Transmission - Terminal Equipment and Protocols for Telematic Services | |
| Standardization of Group 3 facsimile terminals for document transmission SERIES T: TERMINALS FOR TELEMATIC SERVICES | |
| STANDARDIZED COLOUR TEST CHART FOR DOCUMENT FACSIMILE TRANSMISSIONS | |
| Standardized Digitized Image Set - Series T: Terminals for Telematic Services | |
| Standardized Digitized Image Set | |
| Structural Wood Design Examples | |
| Symbols for marking electrical leads and ports on fluid power valves | |
| TELEMATIC ACCESS TO INTERPERSONAL MESSAGING SYSTEM | |
| TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONTRUCTION PRESSURE RATING SUPPLEMENT NO. 7 to NFPA Recommended Standard for Verifying the Fatigue and Static Pressure Ratings of the Pressure Containing Envelope... | |
| Telescopic Cylinders and Cylinders of Nonbolted End Construction - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings... | |
| TELETEX REQUIREMENTS FOR INTERWORKING WITH THE TELEX SERVICE | |
| Tensile Breaking Strength and Elongation of Paper and Paperboard (Using Pendulum-Type Tester) | |
| Test Method for Measurement of Hot Creep of Polymeric Insulations | |
| Test to Evaluate the Aging Properties of Bleached Chemical Pulps | |
| Thickness (Caliper) of Paper, Paperboard, and Combined Board | |
| Tie Rod or Bolted Cylinder - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Metal... | |
| Water-Soluble Chlorides in Pulp and Paper | |
| Water-Soluble Sulfates in Pulp and Paper | |
| Weight-Volume Measurement of Pulpwood (Redesignation of T7) | |
| Weight-volume measurement of pulpwood | |
| Wet Zero-Span Tensile Strength of Pulp |
| << Prev | Next >> |